1
Reversing LCD Monitors Reversing LCD Monitors ClearView ClearView ClearView ClearView ClearView ClearView ClearView ClearView With a ClearView LCD colour monitor on the dashboard and the camera at the back of your vehicle, you have everything in sight - up to 80 per cent more view compared to conventional mirrors. As soon as you select reverse gear, the camera and monitor switch on automatically. (May also be used for forward or interior view with monitors with 2 AV inputs) Cosmetic appearances may change without notice The LCD250P is a versatile 2.5 inch LCD colour monitor. This unobtrusive monitor is supplied with a pedestal mounting which can be detached to allow the monitor to be fixed onto a suitable flat surface. Included is a double sided adhesive pad. Picture is pre-set and is non-adjustable. 1 x AV input The LCD355P is a 3.5 inch dashboard mounted LCD colour monitor. The pedestal can be detached to allow flat surface fixing. Supplied with a remote control to adjust picture quality, AV input and orientation. 2 x AV inputs. 2 nd input can be used as a DVD screen or connected to any other video source. The LCD600M clips over your existing rear view mirror and contains a 6” LCD colour monitor. During normal use, it acts and looks just like an interior mirror. When reverse gear is selected, the left portion of the mirror automatically becomes the LCD screen. Picture quality, orientation and AV input can be selected from the monitors control buttons or by the supplied remote. 2 x AV inputs. The LCD700P is a 7.0 inch LCD TFT colour monitor. Available with both a pedestal mounting bracket and a framing bezel for flush mounting. Can also be used as a DVD headrest monitor. 2 x AV inputs for either a second camera or a DVD/video screen. Push button and remote controlled. Two Monitors in One • It’s a reversing monitor, or • It’s a headrest DVD monitor or both ! Headrest shown not included
