Reversing LCD MonitorsReversing LCD Monitors
ClearViewClearViewClearViewClearViewClearViewClearViewClearViewClearView
With a ClearView LCD colour monitor on the dashboard and the camera at the back of
your vehicle, you have everything in sight - up to 80 per cent more view compared to
conventional mirrors. As soon as you select reverse gear, the camera and monitor
switch on automatically. (May also be used for forward or interior view with monitors with
2 AV inputs)
Cosmetic appearances may change without notice
The LCD250P is a versatile 2.5 inch LCD colour monitor.
This unobtrusive monitor is supplied with a pedestal
mounting which can be detached to allow the monitor to be
fixed onto a suitable flat surface. Included is a double sided
adhesive pad. Picture is pre-set and is non-adjustable.
1 x AV input
The LCD355P is a 3.5 inch dashboard mounted LCD colour
monitor. The pedestal can be detached to allow flat surface
fixing. Supplied with a remote control to adjust picture quality,
AV input and orientation.
2 x AV inputs. 2nd input can be used as a DVD screen or
connected to any other video source.
The LCD600M clips over your existing rear view mirror and
contains a 6” LCD colour monitor. During normal use, it acts
and looks just like an interior mirror. When reverse gear is
selected, the left portion of the mirror automatically becomes
the LCD screen.
Picture quality, orientation and AV input can be selected from
the monitors control buttons or by the supplied remote. 2 x
AV inputs.
The LCD700P is a 7.0 inch LCD TFT colour monitor. Available
with both a pedestal mounting bracket and a framing bezel for
flush mounting. Can also be used as a DVD headrest monitor.
2 x AV inputs for either a second camera or a DVD/video
screen. Push button and remote controlled.
Two Monitors in One
• It’s a reversing monitor, or
• It’s a headrest DVD monitor
or both !
Headrest shown not included