Post on 16-Mar-2020
transcript
Sandvik DD210L is a low profile single boom electro hydraulic drilling machine designed to work in excavations with headroom as low as 1.7 m. The robust universal boom has a large optimum shaped coverage, 360° rotation and full automatic parallelism for fast and easy face drilling. The boom can also be used for cross-cutting, the hose layout is specifically designed to maximize protection in low headings. The exceptional «V» shape layout is designed for good visibility and balance, this and the powerful four-wheeldrive articulated carrier ensure fast and safe maneuvering even in low headroom conditions.The high performance drilling system allows high drilling performance with good drill steel economy and high machine reliability.The operator environment and added automaticfunctions allow the operator to concentrate on safe, fast and accurate drilling.All the service points are well protected but easy toaccess.
SANDVIK DD210LUNDERGROUNDDRILL RIG TECHNICAL SPECIFICATION
1. SANDVIK MINING / TS2-032:01/ENG
HYDRAULIC ROCK DRILL
Rock drill HLX5
Percussion Power 20 kW
Percussion Pressure Max. 220 bar
Percussion rate 67 Hz
Rotation Speed Max. 250 rpm (with OMS80)
Rotation torque 400 Nm (with OMS80)
Hole size (drifting 43 - 64 mm 1.7 - 2.5 in
Hole size (cut hole) 76 -127 mm 2.9 - 5 in
Recommended Rod T38 - R32
T38 - alpha 330
T38 - R35
Shank adapter T38 (male)
Weight 210 kg 462.9 lb
Length 955 mm 37.6 in
Profile height 87 mm 3.4 in
Shank lubrication device Air / oil mist, KVL10-1
Shank lubrication compressor CT10, 1m3/min (7bar)
Air consumption 250 - 350 l/min
Oil consumption 180 - 250 g/h
BOOM
Boom B26XL-F
Boom* B26S-NV, B26XL-NV
Parallel coverage 35 m2 376,74 ft2
Parallelism Automatic hydraulic
Boom extension 1700 mm 66.92 in
Boom weight, net 2100 kg 4630 lb
Roll-over angle 360º
FEED
Feed TF500-12
Feed Force Max. 25 kN
Feed Extension 1600 mm 5.24 ft
TF Feed lengths* 4256, 4864 mm 14, 16 ft
Telescopic feed* TFX6/12. 8/14
FEED DIMENSIONS
Feed TF500 Total Length Hole Length Rod Length Net Weight
12 ft 5270 mm 3440 mm 3700 mm 500 kg
207.4 in 135.4 in 145.6 in 1102 lb
14 ft 5880 mm 4050 mm 4305 mm 530 kg
231.4 in 159.4 in 169.4 in 1168 lb
16 ft 6490 mm 4660 mm 4915 mm 560 kg
255.5 in 183.4 in 193.5 in 1234 lb
INSTRUMENTATION OPTIONS*
Optimine on board** Monitoring system
COVERAGE AREA
B26XL-F (35m²) B26S-NV (29m²) B26XL-NV (35m²)
A 7040 mm 277 in 5970 mm 235 in 7040 mm 277.16 in
B 5900 mm 232 in 5120 mm 201.57 in 5900 mm 232.28 in
C 1140 mm 44.8 in 850 mm 33.46 in 1140 mm 44.88 in
D 5200 mm 204.7 in 4420 mm 174 in 5200 mm 204.72 in
E 1020 mm 40.15 in 1020 mm 40.15 in 1020 mm 40.15 in
F 6810 mm 268 in 5500 mm 216.53 in 6800 mm 267.71 in
G 8160 mm 321.2 in 6480 mm 255.11 in 8150 mm 320.86 in
E
DB
F
G
A
C
Extra coverage with manual override
Auto parallel coverage
SANDVIK DD210L TECHNICAL SPECIFICATION
2. SANDVIK MINING / TS2-032:01/ENG
*Alternative options features/components ** Additional options features/components
HYDRAULIC SYSTEM
Powerpack HPP 555 (55kW)
Percussion pump 100 cc (variable)
Rotation pump 45 cc (gear)
Filtration size 20 micron (pressure)
10 micron (return)
Oil tank volume 160 litres (drilling)
50 litres (tramming)
Tank filling Manual pump
Tank filling* Electric pump
Oil cooler Water cooled. Cooling capacity 1 x 30 kW
Oil cooler* Harsh water
Hydraulic low level indicator Stop drilling when the oil level in drilling tank is low
Biodegradable oils* Shell Naturelle HFE46/HFE68
CONTROL SYSTEM
Type THC560
Manual boom control Direct control
Fully proportional
Hydraulic parallelism
Drilling Control Feed/percussion control
Automatic cycle Stop and return automatics
Constant speed drilling** Replaces feed / percussion control
CLEANING SYSTEM
High pressure cleaning system without reel** Max. 180 bar
GREASING SYSTEMS AND OPTIONS
Centralized greasing points** Carrier
Greasing unit with pump, reel and nozzle** Manual
ELECTRIC SYSTEM AND OPTIONS
Total input power 70kW
Main switch MSE-1JH
Standard voltages 380-690 VAC
Optional voltage* 1000 VAC, 50 Hz
Starting method Star delta starter, 380VAC-550VAC
Voltage fluctuation ± 10%
Automatic cable reel TCR LP with spooling system
Cable reel control (in & Out) At the operator station + rear machine
Cable reel end switch Automatic brake application before end of cable
Batteries 2 x 12 V, 120 Ah
Electric cable rubber or PUR** Depending on voltage (See spec TS2-121)
Ground fault and overcurrent protection** VYK
Sensors in the jacks** Indicator light for jacks up
FLUSHING SYSTEM AND OPTIONS
Flushing Water
Water pump type WBPI
Water pump capacity 43 l/min
Water pump inlet pressure 2 bar (Min.)
Flushing water pressure 10 - 20 bar
Hole air flushing on rock drill return** 1x60l air receiver
Air mist flushing** External or internal water/air connection + air compressor CT16 (11kW)
External air connection** IP5 air cleaner
Automatic air flushing** Double flushing
FIRE SUPPRESSION SYSTEM AND OPTIONS
Hand held fire extinguisher** 2 pcs, Type ABC Desautel
Manual fire suppression system** Ansul, 6 nozzles
SANDVIK DD210L TECHNICAL SPECIFICATION
3. SANDVIK MINING / TS2-032:01/ENG
*Alternative options features/components ** Additional options features/components
TRAMMING
Tramming Speed Horizontal: 12 km/h
13% = 1:7 = 8º 5.0 km/h
Gradeability / Inclination Max. 17º / 15º
TRAMMING DIMENSIONS
FOPS/ROPS certified position
A (High position) FOPS/ROPS 1930 mm 76 in
B (Low position) FOPS/ROPS 1775 mm 69.9 in
C (Extra low position) ROPS 1380 mm 54.3 in
Cornering Left
Feed R1 R2 Xº CorneringCornering with
corner cut 750X750
TF500-12 ft 6250 mm 3027 mm 45º 4109 mm 3767 mm
246 in 119.17 in 161.77 in 148.30 in
TF500-14 ft 6400 mm 3027 mm 45º 4259 mm 3917 mm
251.96 in 119.17 in 167.67 in 154.21 in
TF500-16 ft 6530 mm 3027 mm 45º 4389 mm 4047 mm
257 in 119.17 in 172.79 in 159.33 in
Cornering Right
Feed R1 R2 Xº CorneringCornering with
corner cut 750X750
TF500-12 ft 6450 mm 3027 mm 45º 4310 mm 3967 mm
253.93 in 119.17 in 169.68 in 156.18 in
TF500-14 ft 6400 mm 3027 mm 45º 4439 mm 4097 mm
251.96 in 119.17 in 174.76 in 161.29 in
TF500-16 ft 6530 mm 3027 mm 45º 4459 mm 4117 mm
257.08 in 119.17 in 175.55 in 162.08 in
C BA
Cornering
R2
R1
X°
Cornering
R2
R1
X°
SANDVIK DD210L TECHNICAL SPECIFICATION
4. SANDVIK MINING / TS2-032:01/ENG
*Alternative options features/components ** Additional options features/components
OPERATOR STATION
Safety canopy FOPS/ROPS (ISO3449)
Operation Seated operations
Sound pressure level according to EN791 Operator station: 98 db(A)
Seat Ergonomic, adjustable for tramming including seat belt
Reversing alarm Standard
Integral front screen protection** Buddy guardTM
See spec sheet TS2-062
LIGHTS
Front lights (combined working and drving) 2 x 35 w HID (24V)
Front working lights 2 x 70 W (24V)
Front driving lights 2 x 70 W (24V)
Rear driving lights 2 x 70 W (24V)
Amber strobe light** Beacon (24V)
PACKAGES
Regional packages** SAS (See spec sheet 5-9905)
CARRIER
Carrier TC LP
Carrier type Wheel mounted, frame steering
Frame steering ± 45º
Rear oscillation ± 15º
Ground clearance 300 mm 11.81 in
Diesel Engine Deutz BF4M2012, 74kW. Tier 2
Exhaust catalyzer Standard
Transmission Hydrostatic, automotive
Wheel motor 4 x radial piston
Tyres 315/85 x 15
Tyres* Foam filled tyres
Service Brakes Hydrostatic and positive braking
Parking and Emergency Brakes
Spring appliedHydraulically released fail safe type oil
immersed multi disc brakes on each wheel
Neutral braking Brakes applied when neutral position activated
Fuel tank 60 liters
Hydraulic jacks Vertical (front)
Vertical (rear)
Brake release Manual hand pump
Total weightDepending on options Arround 12 600 kg Arround 27778 lb
Fast filling systems** Complete
Wheel chocks and holder** 2 pieces
Additional HP filters** On tramming circuit
EXTRA ITEMS
Spare rock drill**
Spare wheel assembly** Standard or foam filled
Special tools for rock drill**
Documentation** Extra manuals
SANDVIK DD210L TECHNICAL SPECIFICATION
5. SANDVIK MINING / TS2-032:01/ENG
*Alternative options features/components ** Additional options features/components
Sandvik Mining reserves the right to make changes to the information
on this data sheet without prior notification to users. Please contact a
Sandvik representative for clarification on specifications and options. www.mining.sandvik.com
SANDVIK DD210L TECHNICAL SPECIFICATION
6. SANDVIK MINING / TS2-032:01/ENG
© S
andv
ik M
inin
g 20
13 S
AN
DV
IK is
a r
egis
tere
d tr
adem
ark
owne
d by
San
dvik
Inte
llect
ual P
rope
rty
AB
in S
wed
en a
nd o
ther
cou
ntri
es.
DISTRIBUTOR:
MACHINE DIMENSIONS
A 1930 mm 76 in
B 1775 mm 70 in
C 1380 mm 54.3 in
D 1300 mm 51.2 in
E 1810 mm 71.2 in
F 1720 mm 67.7 in
G 1720 mm 67.7 in
H 6090 mm 239.8 in
I 300 mm 11.8 in
J 300 mm 11.8 in
K 1000 mm 39.4 in
L 165 mm 6.5 in
M 2250 mm 88.6 in
OVERALL LENGTH
TF500 x 12 ft 12370 mm 40.6 ft
TF500 x 14 ft 12590 mm 41.3 ft
TF500 x 16 ft 13475 mm 44.2 ft
DD
210
L
L
MEFG
H
I
OVERALL LENGTH
D
K
C BA
J