Post on 14-Jul-2016
description
transcript
02 | seko | water & industry | products overview
SEKO is an international corporation with over 25 yearsof experience in the dosing systems industry.
We have locations in Italy, the USA, Brazil, South Africa,UK, Spain, France, Singapore, Germany, China, Russia,Turkey and EAU.
SEKO offers a complete range of solenoid valve andperistaltic pump dispensing systems. We also providea wide selection of control instruments and accessories.Our professional staff is committed to serving yourdosing needs.
At SEKO we develop our products based on ourcustomer’s wants and needs. All of our products arethoroughly tested by our internal quality assurancepersonnel, prior to shipment. We believe our customersdeserve to receive only the highest quality products.
Our product development team consists of more then25 full time engineers who are dedicated to quality andreliability. SEKO believes in investing in the future. Weare always working to bring you new, innovative, andtechnologically advanced dosing solutions. We havewhat it takes and want to be your dosing partner.
04 | seko | water & industry | products overview
Innovative2 versions: analogue and digital
3 models that cover 1.06 to 14.27 gph with an outputpressure up to 174 psi
One style configuration allows for easy planning andpreparation for installations
Inventory Reduction
Reduce spares stock holdingevo
Flow rateModel
from 0.88 to 4.4 gph603800
from 4.4 to 11.88 gph803
603800
803
PVDF is suitable for almost all chemicals used in the Industrial,Waste Water Treatment and potable Water applications
Ceramic balls are used to ensure chemical compatibility andpump reliability.
Full chemical compatibilityevo
Compatible
Intuitive programmingProgramming menus are self explanatory and available in 5languages
Intelligent Display, once a function is selected the pumpwill only display the parameters necessary, in accordance withthe selected function
Reduced programming time
The advanced design and manufacturing process allows thediaphragm to have a unique life expectancy
Made of pure solid PTFE, the diaphragm is compatible withmost chemicals
The diaphragm has been tested over a period of 5 years givingsuperior results
Routine diaphragm replacement is no longer a requirement
Reduced maintenance
Full chemical compatibilityevo
evo
Steady Dosing PerformanceReduced power consumption as the solenoid only draws therequired power to activate the pump, based on the workingconditions
Stable dosing performance: improved pump efficiencyas performance is not affected by power supply fluctuations
Reduce inventory holding
evo
AutomaticSwitching PowerSupply 100÷240Vac 50/60 Hz
innovation | technology | future | 05
Reliable
06 | seko | water & industry | products overview
AKLCostant dosagewith FPM level control input.
Select from two frequency ranges(0÷20% or 0÷100%).
The constant flow rate is easilyadjusted with the analogue controldial, located on the front panel.
The Power-On led and level controlindicators are also on this panel.
APGProportional dosagewith FPM level control input.
Analogue dosing pump with constantflow rate manually adjustable,proportional flow rate according toan external analogue (4÷20 mA) ordigital pulse signal (e.g. from watermeter).
n Control dial (percentage and "n"value in multiplication mode)
n 6 position adjustable switch:
- 3 in division mode (1, 4, 10 = n)
- 1 in multiplication mode (n=1)
- 1 for proportional 4÷20 mAsignal
- 1 for constant functionality
n “pacing” function adjustable bydip switch
Analogue Version
Level control input
Manual priming valve
Electrical connections areconfigured with "quick-connectors", cappedwhen not in use
PTFE diaphragm.Standard pump head inPVDF
Case made in PPreinforced with fiberglass.
NEMA 4X rated
Complete standardinstallation kit includes:
– PVDF foot filter andinjection valve
– PVC suction tube
– PE delivery tube
Standard power supply
Automatic Switching100-240 Vac 50-60 Hz
Features
innovation | technology | future | 07
TPGProportional dosagewith FPM level control input.
Digital dosing pump with constant flowrate manually adjustable, proportionalflow rate according to an externalanalog (4÷20 mA) or digital pulsesignal (e.g. from water meter).
n The digital upgrade from our APGpump. Additional features include:Timer function, ppm dosing,statistics, password and On/Off input(remote switch).
TPRProportional dosagewith FPM level control input.
Digital dosing pump with pH/Redoxcontrol meter built in.
n Digital interface for constant orproportional dosing, depending onthe measured pH or Rx value
n PT100 probe input for thermalcompensation
n Repetition alarm relay
n Input On-Off for remote control
n 4÷20 mA output
TCKTimed dosagewith FPM level control input.
Digital dosing pump with a manuallyadjustable flow rate or timer control.
n Programmable timed relay
Digital Version
08 | seko | water & industry | products overview
Features Code
Analogue dosing pump with manually adjustable constant flow rate, with proportional flow rateaccording to an external analog (4÷20 mA) or digital signal (water meter)
AKL
APG
100 ÷ 240 Vac 50-60 Hz
Power supply
N
Pump head Connections Balls Diaphragm
H PVDF PVDF Ceramic PTFE
Model
Liquid contact materials
H PVDF
Installation Kit
0 FPM
Seals
Standard
Options
0.17” x 1/4”
0.17” x 1/4”
17414511629
1.061.321.582.11
12,2603
2321457214
1.852.643.964.75
23,9800
72582914
5.286.6010.0314.27
22,25/16” x 7/16”803
Version
160
300
300
0,420,520,630,83
0,390,550,831,00
1,111,392,113,00
Pressure[psi]
Flow rate[gph]
Ø ConnectionsIN / OUT [inches]
Consumption[W]
Fequency max[stroke/min]
Stroke capacity[cc/stroke]
U00
AKL 600 N H H 0 U00
Analogue dosing pump with manually adjustable constant flow rate
Analogue
Digital dosing pump with manually adjustable constant flow rate and proportional flow rate accordingto an external analog (4÷20 mA) or digital signal (water meter)
Digital dosing pump with built in pH/Redox control meter
Digital dosing pump with constant or timed flow rate
TPG
TPR
TCK
Digital
innovation | technology | future | 09
Pres
sure
[psi
]
Flow Rate [gph ]
A (Height)Model B (Width) C (Depth) D (Max Height)
9.09” 4.68”5.70”
5.86”
10.11”
Dimension [inches]
603800
803
Features Dimensional Drawings and Flow Rate
10 | seko | water & industry | products overview
n Single-jet water meterswith pulse sender
n Dry dialn Roller readingn 4 or 1 pulse/l n Cold water up to 30 °Cn Connections:
from ½"(13 mm)to 2” (50 mm)
TC1 Series TH1 Series TC0 Series
n Single-jet water meterswith pulse sender
n Dry dialn Roller reading n 4 or 1 pulse/l n Hot water up to 90 °Cn Connections:
from ½"(13 mm)to 2” (50 mm)
n Single-jet water meterswithout pulse sender
n Dry or wet dialn Roller reading n Cold water up to 30 °Cn Connections:
from ½"(13 mm)to 2” (50 mm)
We offer precise and highly sensitive water meters, which meet or exceed all standards. Wemaintain extensive quality control, paying particular attention to those parts exposed towater.
0
+5%
Qmin Qt
+2%
0
-2%
-5%
Qn Qmax
TYPICAL ACCURACY CURVE
HEADLOSS DIAGRAM
DN mm. 13 25 30 40 502010
7
54
32,5
2
1,5
1
0,7
0,5
0,5 0,7 3 4 7 10 20 30 401 2 5
�ow rate [m3/h]
Hea
dlo
ss b
y m
eter
s o
f w
ater
co
lum
n
Threaded water meters
n Threaded water meters
Accessories Pulse-emitter water meters
13½
Sizemm DN
Inch
3
1,5
30-
120-
10000
-
-
5
2,5
50-
200-
10000
-
-
20¾
7
3,5
70-
280-
100000
-
-
251
10
5
100-
400-
100000
-
-
301 ¼
20
10
200-
800-
100000
-
-
401 ½
30
15
450-
3000-
100000
-
-
502
Max flow (short period) Qmax m3/h
Nominal flow Qn m3/h
Min flow Qmin l/h (accuracy ±5%) m3/h
Transition flow Qt l/h (accuracy ±2%) m3/h
Maximum reading m3
Starting flow m3
Weight kg
12 | seko | water & industry | products overview
Manual Self CheckCapabilitiesProgramming menu allows formanual verification of the pumpsfunctionality.
Data storage
l Internal Flash Memory withrecords interval from 1 to 99 min.(near to 16000 records
l Visualization key for stored data intabular and graphic form.
l Type: Circular (F.I.F.O.) or Filling.
RS485 Serial port
l For set-up and real-time dataacquisition from remote or forstored data download on PC orlaptop (software required).
l MODBUS RTU communicationprotocol
USB portDownload measuring data onremovable memory USB Drive(upon request).
Measure Inputl Highly accurate measurement.
l Probes quality check.
l Modular measuring system.
Digital InputController can be disabled formaintenance purposes with use ofthe dedicated voltage input.
Current outputs4…20mA Galvanic isolation Two independent programmableOutput Measure with PID routineregulation.
Relay Outputsl Four independent functions, two
set points, one alarm remote, onebackwashing probe.
l On/OFF, Timed routine functionsetting.
Kontrol 500-502
FeaturesGraphic display
l 128 by 64 pixel resolutionmonochrome display with graphicicons to show: digital outputs’status, data storage, washing cycle,alarms.
l Simultaneous flashing values ofthe measure (mumeric + bargraph)and temperature.
l Scrolling analogue output values.
Keypad
l Five control keys for theconfiguration and calibration ofthe instrument.
Enclosure Box
l Wall mounting ABS plastic materialIP65 (144x144)
l Panel mounting IP54 (96x96)
Power Supply
l Universal Power Supply100…240 Vac 50/60 Hz
Single and doubleparameter controlinstumentsA simple, well executed solution forregulating water treatmentapplications with single or dualparameters. Designed withunderstanding and experience.
innovation | technology | future | 13
l Waste Waterl Drinking Waterl Cooling Towerl Boilerl Legionella disinfectionl Reverse Osmosil Sludgel Create washl Galvanic Procesl Dioxide Stationl CIPl Irrigationl Swimming Pooll Fish Farming
ApplicationspH
ORP
Conductivity
Dissolved Oxygen
Temperature
0…14,00 pH
± 1500 mV
0…20 μS; 0…200 μS; 0…2.000 μS;0…20.000 μS; 0…200.000 μS
0…20,0 ppm or mg/l; 0…200% SAT
with PT100 32…212 °F (0…100°C)
Measure range
Products LineCode
K500PRK500CDK500OX
K502PRK502PDK502PO
Model
Kontrol PR 500
Kontrol CD 500
Kontrol OX 500
Kontrol PR-PR 502
Kontrol PR-CD 502
Kontrol PR-OX 502
Single parameter
Single parameter
Single parameter
Double parameters
Double parameters
Double parameters
Description
for pH or ORP value
for Conductivity values
for Dissolved Oxygen values
for pH/ORP - pH/ORP values
for pH/ORP - Conductivity values
for pH/ORP - Dissolved Oxygen values
14 | seko | water & industry | products overview
Kontrol 200Single parametercontrol instumentA simple, well executed solution forregulating single parameter watertreatment applications. Designed withunderstanding and experience.
FeaturespHORPConductivity
DissolvedOxygen
Temperature
0…14,00 pH
± 1500 mV
0…20 μS;0…200 μS;0…2.000 μS;0…20.000 μS;0…200.000 μS
0…20,0 ppmor mg/l;0…200% SAT
with PT10032…212 °F(0…100°C)
Measure range
Products LineCode
K200PR
K200CD
K200OX
Model
Kontrol PR 200for pH or ORP value
Kontrol CD 200for Conductivity values
Kontrol OX 200for Dissolved Oxygen values
Graphic displayand Keypadl 128 by 64 pixel resolution
monochrome display withgraphic icons to show: digitaloutputs’ status, data storage,washing cycle, alarms.
l Simultaneous flashing valuesof the measure (mumeric +bargraph) and temperature.
l Four control keys for theconfiguration of thecalibration and theinstrument.
Enclosure Boxand Power Supplyl Wall mounting ABS plastic
material IP65 (144x144)
l Panel mounting IP54 (96x96)
l Universal Power Supply100…240 Vac 50/60 Hz
Manual Self CheckCapabilitiesProgramming menu allows formanual verification of thepumps functionality.
Measure Inputl Highly accurate
measurement.
l Probes quality check.
l Modular measuring system.
Digital InputController can be disabled formaintenance purposes with useof the dedicated voltage input.
Current outputs4…20mA Galvanic isolation One independent programmableOutput Measure.
Relay Outputsl Four independent functions,
two set points, one alarmremote, one backwashingprobe.
l On/OFF, Timed routinefunction setting.
innovation | technology | future | 15
Probes
SPH 1 SRH 1
pH and Redox
PT 100V
Temperature
CTK 10 CTK 5 CTK 1 CTK 1G
Conductivity Oxygen
OXYSENS®
Probesmodel
Range Min.conduct.
Constant Max.temperature
Max.pressure
Bodymaterial
Connections Mounting
SPH 1 S6 0÷14 pH 50 μS - 140 °F 101.52 psi Epoxy12x120
6.56 yd andBNC Cable
Standard 12
SRH 1 PTS6 ±2000 mV - - 140 °F 101.52 psi Epoxy12x120
6.56 yd andBNC Cable
Standard 12
PT 100 V 0÷100°C - - - 101.52 psi Glass12x120
5.46 ydCable
Standard 12
CTK 10 0.01÷500 μS - K =10 cm
212 °F -
PP
Electrodes inSS 316, IP65
4-polesM connector
¾” G.M.CTK 5 0.5÷2000 μS - K = 5 cm
CTK 1 5÷5000 μS - K = 1 cm
CTK 1G 5÷20 μS K = 1 cm 140 °F - PPElectrodes inGraphite
4-polesCable 8.74 yd
PG 13.5
Oxysens 0÷20ppm - - 140 °F - Silver-platinum
Cable 5.46 yd PG 13.5
PSS3 In-line Probe HolderMaterial: PVC
Max. Temperature: 140 °F
Max Pressure: 174.04 psi
Connections: ½” G.M.
Cables for CTK probe with4-pole connectors5-pole cable (3 PT100, 2 sensor) withscreen and PVC sheath complete withfemale connector.
Connections:½” G.M.
Length:5.46 or 10.93 yd
Certified buffer solutionsThe precision and reliability of a pH, Redox orConductivity measurement is determined bythe buffer solution used for calibrating the
probe.
Value:4.00 pH at 68°F or465 mV at 77°F.
Subject to change without notice | © Seko Dosing Systems Corp. | BROW&IUS121
BRAZILn Seko do Brasil Commerciode Sistemas de DosagemLimitada03170-050 São Paulo (SP) Phone: +55 11 2606 9878Fax: +55 11 2606 9878sekobrasil@sekobrasil.com.brwww.sekobrasil.com.br
CHINAn Hebei Seko Fluid Controls Co.Ltd.072750 HebeiPhone: +86 312 552 0904Fax: +86 312 552 0901china@seko.comwww.sekochina.com
DENMARKn Seko DenmarkDK-4930 MariboPhone: +45 5475 7545Fax: +45 5474 7545info@seko.com
FRANCEn Seko Lefranc-Bosi S.A.77435 - Marne La Vallee Cedex 2Phone: +33 1 6005 9060Fax: +33 1 6480 4104lefrancbosi@lefrancbosi.comservice.commercial@seko.frwww.lefrancbosi.com
GERMANYn Seko Deutschland GmbH55252 Mainz - KastelPhone: +49 6134 2858 10Fax: +49 6134 2858 29info@seko-messtechnik.dewww.seko-germany.com
ITALYn Seko SpaVia Salaria Km. 92,20002010 S.Rufina - RietiPhone: +39 0746 605801Fax: +39 0746 607072sales@seko.com
ITALYn Seko Spa[Process & Sytems]Via Di Vittorio, 2520068 Peschiera Borromeo - MilanoPhone: +39 02 97372411Fax: +39 02 55301744info.psd@seko.cominfo@seko.com
ROMANIAn Seko Sieta S.r.l.400393 Cluj-NapocaPhone: +40 264 415 251Fax: +40 264 415 622info.dpro@seko.com
RUSSIAn OOO Seko129347 - MoscowPhone: +74 99 182 52 36Fax: +74 99 182 52 36sekorussia@seko.comwww.sekorussia.ru
SINGAPOREn Seko Dosing SystemsAsia Pacific Pte Ltd608838 SingaporePhone: +65 6515 6996Fax: +65 6515 5079asiapacific@seko.com
SOUTH AFRICAn Seko Southern Africa(PTY) LtdKyasand - Johannesburg - GautengPhone: +27 11 704 6589Fax: +27 11 704 6588sales@sekosa.co.za
SPAINn Seko Ibérica Sistemas deDosificación S.A.08960 Sant Just Desvern -BarcelonaPhone: +34 93 4802 570Fax: +34 93 4802 571sekoiberica@sekoiberica.com
SWEDENn Seko Sweden26123 LandskronaPhone: +46 418 448 482Fax: +46 418 448 483info@seko.com
TURKEYn Seko Endüstriyel Pompalar veProses Sistemleri San. ve Tic. Ltd.Şti.Kartal Istanbul Phone: +90 216 353 2542Fax: +90 216 353 1450info@seko.com.trwww.seko.com.tr
UNITED ARAB EMIRATESn Seko Middle East FZEP.O. Box 42090 – Hamriyah FreeZone, SharjahPhone: +971 65264982Fax: +971 65264983info@sekome.aesales@sekome.ae
UNITED KINGDOMn Seko UKChemical Controls LtdHarlow, Essex - CM19 5JHPhone: +44 1279 423550Fax: +44 1279 423993seko.uk@seko.comwww.sekouk.com
A Worldwide Group at your service
USAn Seko Dosing Systems CorporationTullytown - PA 19007Phone: +1 215 945 01 25Fax: +1 215 945 09 37sales@sekousa.comwww.sekousa.com