SEKO Water and Industry US2

WaterTreatmentand IndustrialApplications

innovation technology future

02 | seko | water & industry | products overview

SEKO is an international corporation with over 25 yearsof experience in the dosing systems industry.

We have locations in Italy, the USA, Brazil, South Africa,UK, Spain, France, Singapore, Germany, China, Russia,Turkey and EAU.

SEKO offers a complete range of solenoid valve andperistaltic pump dispensing systems. We also providea wide selection of control instruments and accessories.Our professional staff is committed to serving yourdosing needs.

At SEKO we develop our products based on ourcustomer’s wants and needs. All of our products arethoroughly tested by our internal quality assurancepersonnel, prior to shipment. We believe our customersdeserve to receive only the highest quality products.

Our product development team consists of more then25 full time engineers who are dedicated to quality andreliability. SEKO believes in investing in the future. Weare always working to bring you new, innovative, andtechnologically advanced dosing solutions. We havewhat it takes and want to be your dosing partner.

innovation | technology | future | 03

Tekna evo


Innovative2 versions: analogue and digital

3 models that cover 1.06 to 14.27 gph with an outputpressure up to 174 psi

One style configuration allows for easy planning andpreparation for installations

Inventory Reduction

Reduce spares stock holdingevo

Flow rateModel

from 0.88 to 4.4 gph603800

from 4.4 to 11.88 gph803

603800

803

PVDF is suitable for almost all chemicals used in the Industrial,Waste Water Treatment and potable Water applications

Ceramic balls are used to ensure chemical compatibility andpump reliability.

Full chemical compatibilityevo

Compatible

Intuitive programmingProgramming menus are self explanatory and available in 5languages

Intelligent Display, once a function is selected the pumpwill only display the parameters necessary, in accordance withthe selected function

Reduced programming time

The advanced design and manufacturing process allows thediaphragm to have a unique life expectancy

Made of pure solid PTFE, the diaphragm is compatible withmost chemicals

The diaphragm has been tested over a period of 5 years givingsuperior results

Routine diaphragm replacement is no longer a requirement

Reduced maintenance

Full chemical compatibilityevo

evo

Steady Dosing PerformanceReduced power consumption as the solenoid only draws therequired power to activate the pump, based on the workingconditions

Stable dosing performance: improved pump efficiencyas performance is not affected by power supply fluctuations

Reduce inventory holding

evo

AutomaticSwitching PowerSupply 100÷240Vac 50/60 Hz


Reliable


AKLCostant dosagewith FPM level control input.

Select from two frequency ranges(0÷20% or 0÷100%).

The constant flow rate is easilyadjusted with the analogue controldial, located on the front panel.

The Power-On led and level controlindicators are also on this panel.

APGProportional dosagewith FPM level control input.

Analogue dosing pump with constantflow rate manually adjustable,proportional flow rate according toan external analogue (4÷20 mA) ordigital pulse signal (e.g. from watermeter).

n Control dial (percentage and "n"value in multiplication mode)

n 6 position adjustable switch:

- 3 in division mode (1, 4, 10 = n)

- 1 in multiplication mode (n=1)

- 1 for proportional 4÷20 mAsignal

- 1 for constant functionality

n “pacing” function adjustable bydip switch

Analogue Version

Level control input

Manual priming valve

Electrical connections areconfigured with "quick-connectors", cappedwhen not in use

PTFE diaphragm.Standard pump head inPVDF

Case made in PPreinforced with fiberglass.

NEMA 4X rated

Complete standardinstallation kit includes:

– PVDF foot filter andinjection valve

– PVC suction tube

– PE delivery tube

Standard power supply

Automatic Switching100-240 Vac 50-60 Hz

Features


TPGProportional dosagewith FPM level control input.

Digital dosing pump with constant flowrate manually adjustable, proportionalflow rate according to an externalanalog (4÷20 mA) or digital pulsesignal (e.g. from water meter).

n The digital upgrade from our APGpump. Additional features include:Timer function, ppm dosing,statistics, password and On/Off input(remote switch).

TPRProportional dosagewith FPM level control input.

Digital dosing pump with pH/Redoxcontrol meter built in.

n Digital interface for constant orproportional dosing, depending onthe measured pH or Rx value

n PT100 probe input for thermalcompensation

n Repetition alarm relay

n Input On-Off for remote control

n 4÷20 mA output

TCKTimed dosagewith FPM level control input.

Digital dosing pump with a manuallyadjustable flow rate or timer control.

n Programmable timed relay

Digital Version


Features Code

Analogue dosing pump with manually adjustable constant flow rate, with proportional flow rateaccording to an external analog (4÷20 mA) or digital signal (water meter)

AKL

APG

100 ÷ 240 Vac 50-60 Hz

Power supply

N

Pump head Connections Balls Diaphragm

H PVDF PVDF Ceramic PTFE

Model

Liquid contact materials

H PVDF

Installation Kit

0 FPM

Seals

Standard

Options

0.17” x 1/4”

0.17” x 1/4”

17414511629

1.061.321.582.11

12,2603

2321457214

1.852.643.964.75

23,9800

72582914

5.286.6010.0314.27

22,25/16” x 7/16”803

Version

160

300

300

0,420,520,630,83

0,390,550,831,00

1,111,392,113,00

Pressure[psi]

Flow rate[gph]

Ø ConnectionsIN / OUT [inches]

Consumption[W]

Fequency max[stroke/min]

Stroke capacity[cc/stroke]

U00

AKL 600 N H H 0 U00

Analogue dosing pump with manually adjustable constant flow rate

Analogue

Digital dosing pump with manually adjustable constant flow rate and proportional flow rate accordingto an external analog (4÷20 mA) or digital signal (water meter)

Digital dosing pump with built in pH/Redox control meter

Digital dosing pump with constant or timed flow rate

TPG

TPR

TCK

Digital


Pres

sure

[psi

]

Flow Rate [gph ]

A (Height)Model B (Width) C (Depth) D (Max Height)

9.09” 4.68”5.70”

5.86”

10.11”

Dimension [inches]

603800

803

Features Dimensional Drawings and Flow Rate


n Single-jet water meterswith pulse sender

n Dry dialn Roller readingn 4 or 1 pulse/l n Cold water up to 30 °Cn Connections:

from ½"(13 mm)to 2” (50 mm)

TC1 Series TH1 Series TC0 Series

n Single-jet water meterswith pulse sender

n Dry dialn Roller reading n 4 or 1 pulse/l n Hot water up to 90 °Cn Connections:

from ½"(13 mm)to 2” (50 mm)

n Single-jet water meterswithout pulse sender

n Dry or wet dialn Roller reading n Cold water up to 30 °Cn Connections:

from ½"(13 mm)to 2” (50 mm)

We offer precise and highly sensitive water meters, which meet or exceed all standards. Wemaintain extensive quality control, paying particular attention to those parts exposed towater.

0

+5%

Qmin Qt

+2%

0

-2%

-5%

Qn Qmax

TYPICAL ACCURACY CURVE

HEADLOSS DIAGRAM

DN mm. 13 25 30 40 502010

7

54

32,5

2

1,5

1

0,7

0,5

0,5 0,7 3 4 7 10 20 30 401 2 5

�ow rate [m3/h]

Hea

dlo

ss b

y m

eter

s o

f w

ater

co

lum

n

Threaded water meters

n Threaded water meters

Accessories Pulse-emitter water meters

13½

Sizemm DN

Inch

3

1,5

30-

120-

10000

-

-

5

2,5

50-

200-

10000

-

-

20¾

7

3,5

70-

280-

100000

-

-

251

10

5

100-

400-

100000

-

-

301 ¼

20

10

200-

800-

100000

-

-

401 ½

30

15

450-

3000-

100000

-

-

502

Max flow (short period) Qmax m3/h

Nominal flow Qn m3/h

Min flow Qmin l/h (accuracy ±5%) m3/h

Transition flow Qt l/h (accuracy ±2%) m3/h

Maximum reading m3

Starting flow m3

Weight kg


Kontrol series


Manual Self CheckCapabilitiesProgramming menu allows formanual verification of the pumpsfunctionality.

Data storage

l Internal Flash Memory withrecords interval from 1 to 99 min.(near to 16000 records

l Visualization key for stored data intabular and graphic form.

l Type: Circular (F.I.F.O.) or Filling.

RS485 Serial port

l For set-up and real-time dataacquisition from remote or forstored data download on PC orlaptop (software required).

l MODBUS RTU communicationprotocol

USB portDownload measuring data onremovable memory USB Drive(upon request).

Measure Inputl Highly accurate measurement.

l Probes quality check.

l Modular measuring system.

Digital InputController can be disabled formaintenance purposes with use ofthe dedicated voltage input.

Current outputs4…20mA Galvanic isolation Two independent programmableOutput Measure with PID routineregulation.

Relay Outputsl Four independent functions, two

set points, one alarm remote, onebackwashing probe.

l On/OFF, Timed routine functionsetting.

Kontrol 500-502

FeaturesGraphic display

l 128 by 64 pixel resolutionmonochrome display with graphicicons to show: digital outputs’status, data storage, washing cycle,alarms.

l Simultaneous flashing values ofthe measure (mumeric + bargraph)and temperature.

l Scrolling analogue output values.

Keypad

l Five control keys for theconfiguration and calibration ofthe instrument.

Enclosure Box

l Wall mounting ABS plastic materialIP65 (144x144)

l Panel mounting IP54 (96x96)

Power Supply

l Universal Power Supply100…240 Vac 50/60 Hz

Single and doubleparameter controlinstumentsA simple, well executed solution forregulating water treatmentapplications with single or dualparameters. Designed withunderstanding and experience.


l Waste Waterl Drinking Waterl Cooling Towerl Boilerl Legionella disinfectionl Reverse Osmosil Sludgel Create washl Galvanic Procesl Dioxide Stationl CIPl Irrigationl Swimming Pooll Fish Farming

ApplicationspH

ORP

Conductivity

Dissolved Oxygen

Temperature

0…14,00 pH

± 1500 mV

0…20 μS; 0…200 μS; 0…2.000 μS;0…20.000 μS; 0…200.000 μS

0…20,0 ppm or mg/l; 0…200% SAT

with PT100 32…212 °F (0…100°C)

Measure range

Products LineCode

K500PRK500CDK500OX

K502PRK502PDK502PO

Model

Kontrol PR 500

Kontrol CD 500

Kontrol OX 500

Kontrol PR-PR 502

Kontrol PR-CD 502

Kontrol PR-OX 502

Single parameter

Single parameter

Single parameter

Double parameters

Double parameters

Double parameters

Description

for pH or ORP value

for Conductivity values

for Dissolved Oxygen values

for pH/ORP - pH/ORP values

for pH/ORP - Conductivity values

for pH/ORP - Dissolved Oxygen values


Kontrol 200Single parametercontrol instumentA simple, well executed solution forregulating single parameter watertreatment applications. Designed withunderstanding and experience.

FeaturespHORPConductivity

DissolvedOxygen

Temperature

0…14,00 pH

± 1500 mV

0…20 μS;0…200 μS;0…2.000 μS;0…20.000 μS;0…200.000 μS

0…20,0 ppmor mg/l;0…200% SAT

with PT10032…212 °F(0…100°C)

Measure range

Products LineCode

K200PR

K200CD

K200OX

Model

Kontrol PR 200for pH or ORP value

Kontrol CD 200for Conductivity values

Kontrol OX 200for Dissolved Oxygen values

Graphic displayand Keypadl 128 by 64 pixel resolution

monochrome display withgraphic icons to show: digitaloutputs’ status, data storage,washing cycle, alarms.

l Simultaneous flashing valuesof the measure (mumeric +bargraph) and temperature.

l Four control keys for theconfiguration of thecalibration and theinstrument.

Enclosure Boxand Power Supplyl Wall mounting ABS plastic

material IP65 (144x144)

l Panel mounting IP54 (96x96)

l Universal Power Supply100…240 Vac 50/60 Hz

Manual Self CheckCapabilitiesProgramming menu allows formanual verification of thepumps functionality.

Measure Inputl Highly accurate

measurement.

l Probes quality check.

l Modular measuring system.

Digital InputController can be disabled formaintenance purposes with useof the dedicated voltage input.

Current outputs4…20mA Galvanic isolation One independent programmableOutput Measure.

Relay Outputsl Four independent functions,

two set points, one alarmremote, one backwashingprobe.

l On/OFF, Timed routinefunction setting.


Probes

SPH 1 SRH 1

pH and Redox

PT 100V

Temperature

CTK 10 CTK 5 CTK 1 CTK 1G

Conductivity Oxygen

OXYSENS®

Probesmodel

Range Min.conduct.

Constant Max.temperature

Max.pressure

Bodymaterial

Connections Mounting

SPH 1 S6 0÷14 pH 50 μS - 140 °F 101.52 psi Epoxy12x120

6.56 yd andBNC Cable

Standard 12

SRH 1 PTS6 ±2000 mV - - 140 °F 101.52 psi Epoxy12x120

6.56 yd andBNC Cable

Standard 12

PT 100 V 0÷100°C - - - 101.52 psi Glass12x120

5.46 ydCable

Standard 12

CTK 10 0.01÷500 μS - K =10 cm

212 °F -

PP

Electrodes inSS 316, IP65

4-polesM connector

¾” G.M.CTK 5 0.5÷2000 μS - K = 5 cm

CTK 1 5÷5000 μS - K = 1 cm

CTK 1G 5÷20 μS K = 1 cm 140 °F - PPElectrodes inGraphite

4-polesCable 8.74 yd

PG 13.5

Oxysens 0÷20ppm - - 140 °F - Silver-platinum

Cable 5.46 yd PG 13.5

PSS3 In-line Probe HolderMaterial: PVC

Max. Temperature: 140 °F

Max Pressure: 174.04 psi

Connections: ½” G.M.

Cables for CTK probe with4-pole connectors5-pole cable (3 PT100, 2 sensor) withscreen and PVC sheath complete withfemale connector.

Connections:½” G.M.

Length:5.46 or 10.93 yd

Certified buffer solutionsThe precision and reliability of a pH, Redox orConductivity measurement is determined bythe buffer solution used for calibrating the

probe.

Value:4.00 pH at 68°F or465 mV at 77°F.

Subject to change without notice | © Seko Dosing Systems Corp. | BROW&IUS121

BRAZILn Seko do Brasil Commerciode Sistemas de DosagemLimitada03170-050 São Paulo (SP) Phone: +55 11 2606 9878Fax: +55 11 2606 [email protected]

CHINAn Hebei Seko Fluid Controls Co.Ltd.072750 HebeiPhone: +86 312 552 0904Fax: +86 312 552 [email protected]

DENMARKn Seko DenmarkDK-4930 MariboPhone: +45 5475 7545Fax: +45 5474 [email protected]

FRANCEn Seko Lefranc-Bosi S.A.77435 - Marne La Vallee Cedex 2Phone: +33 1 6005 9060Fax: +33 1 6480 [email protected]@seko.frwww.lefrancbosi.com

GERMANYn Seko Deutschland GmbH55252 Mainz - KastelPhone: +49 6134 2858 10Fax: +49 6134 2858 [email protected]

ITALYn Seko SpaVia Salaria Km. 92,20002010 S.Rufina - RietiPhone: +39 0746 605801Fax: +39 0746 [email protected]

ITALYn Seko Spa[Process & Sytems]Via Di Vittorio, 2520068 Peschiera Borromeo - MilanoPhone: +39 02 97372411Fax: +39 02 [email protected]@seko.com

ROMANIAn Seko Sieta S.r.l.400393 Cluj-NapocaPhone: +40 264 415 251Fax: +40 264 415 [email protected]

RUSSIAn OOO Seko129347 - MoscowPhone: +74 99 182 52 36Fax: +74 99 182 52 [email protected]

SINGAPOREn Seko Dosing SystemsAsia Pacific Pte Ltd608838 SingaporePhone: +65 6515 6996Fax: +65 6515 [email protected]

SOUTH AFRICAn Seko Southern Africa(PTY) LtdKyasand - Johannesburg - GautengPhone: +27 11 704 6589Fax: +27 11 704 [email protected]

SPAINn Seko Ibérica Sistemas deDosificación S.A.08960 Sant Just Desvern -BarcelonaPhone: +34 93 4802 570Fax: +34 93 4802 [email protected]

SWEDENn Seko Sweden26123 LandskronaPhone: +46 418 448 482Fax: +46 418 448 [email protected]

TURKEYn Seko Endüstriyel Pompalar veProses Sistemleri San. ve Tic. Ltd.Şti.Kartal Istanbul Phone: +90 216 353 2542Fax: +90 216 353 [email protected]

UNITED ARAB EMIRATESn Seko Middle East FZEP.O. Box 42090 – Hamriyah FreeZone, SharjahPhone: +971 65264982Fax: +971 [email protected]@sekome.ae

UNITED KINGDOMn Seko UKChemical Controls LtdHarlow, Essex - CM19 5JHPhone: +44 1279 423550Fax: +44 1279 [email protected]

A Worldwide Group at your service

USAn Seko Dosing Systems CorporationTullytown - PA 19007Phone: +1 215 945 01 25Fax: +1 215 945 09 [email protected]

Date post:	14-Jul-2016
Category:	Documents
Upload:	johanna-rojas
View:	28 times
Download:	0 times

SEKO Water and Industry US2

Documents