Post on 04-Jul-2019
transcript
Over 50 years serving the marine industry.
DELTA
SEWAGE TREATMENT PLANTS
OILY WATER SEPARATORS
MARINE INCINERATORS
HELICOPTER REFUELING SYSTEMS
POTABLE WATER HEATERS
HYDROPHORE GROUPS
Over 45 years looking out for a better marine environment.
ISO 9001
BUREAU VERITASCertification
ISO 14001
BUREAU VERITAS
Detegasa also collaborates extensively with main Classification Societies world wide.
DETEGASA is a Marine and Industrial manufacturer founded in 1985 after splitting from a holding group dating back to 1965.
50 years of experience later and 30 of them dedicated to the marine industry, DETEGASA has become a world leader, manufacturer of Marine Equipment such as Incinerators, Sewage Treatment Plants, Oily Water Separators, Helicopter Refueling Systems and customized solutions
With two production facilities located in the northwest of Spain, Detegasa manufactures 100% of its production in Europe while still providing some of the most competitive equipment in the market.
One of the main advantages of Detegasa is an effective blend of experience and knowledge, that allows the company to get involved in projects with the strictest requirements such as hazardous area regulations, ASME standards, Shock and Vibration requirements for Navy vessels and also with the most stringent notations in regards to Marine Pollution Prevention from IMO and the different Classification Societies.
ISO 9001ISO 14001OHSAS 18001AQAP/ PECAL 2110
NAVY
MARINE
OFFSHORE
INDUSTRIAL
DELTA
OILY WATER SEPARATORS MARINE INCINERATORS HELICOPTER REFUELING SYSTEMS
SEWAGE TREATMENT PLANTSPOTABLE WATER HEATERS &
HYDROPHORE GROUPS
CLIENTS
Hyundai HIJurong SYDSMESamsung HIVard PromarSTXXiamen SYWaigaoqiao SYNavantia SYBaltic SY
Opus OffshoreV-ShipsPemexJan de NulPax-OceanSovfomflotPetrobrasTotalNam CheongChina Navigation
Drillships (5) for Petrobras (Estaleiro Enseada do Paraguacu)Drillships (3) for Petrobras (Ecovix)
Moho Nord FPU Project for Total Offshore (HHI)DRU’s (7) For Sete Brasil ( Jurong Shipyard)
PTSC Lam Son FPSO Conversion Project (Keppel Singapore)H1318 (Shanghai Waigaoqiao Shipyard
Clov FPSO Total Project (DSME)DS Drillships (Enseada Industrial Naval)
Egina ProjectAtomic Icebreaker for Rosmorport (Baltic Shipyard)
KEY PROJECTS
DETEGASATel: +34-981494000Fax: +34-981486352www.detegasa.comcommercial@detegasa.com
Sewage Treatment Plants
No risk of odour emissions or methane production due to aerobic processWill perform satisfactorily with waste collected either by vacuum or gravity
Containerized solutions available upon request
DELTA
Main Features & AdvantagesMain Features & AdvantagesCompact solutions for black and grey water treatment.
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
ISO 9001
BUREAU VERITASCertification
IMO MEPC 159(55) & MEPC 227(64) MED Type Approved
Wide range of models available for crew on board from 10-400 people.
BIOLOGICAL
DELTA
Black and Grey Water
Black Water Only
STPN MODELSSpecially designed to reduce the footprintwhile treating black & grey water throughthe whole process according to IMO MEPC227(64)
PRBN MODELSReduced foot print for black water
treatment through biological process
SEWAGE TREATMENT PLANTS
COMPATIBLE WITH ALL VACUUM
SYSTEMS IN THE MARKET
LOW MAINTENANCEREQUIRED
COMPLIANT WITH IMO MEPC 159(55)
&IMO MEPC 227 (64)
ABS AND RMRS TYPE APPROVED.
MODULAR SOLUTIONS AVAILABLE
POSSIBILITY TO INSTALL IN
CONTAINERS FOR IN-LAND OPERATION
DELTA STPN SERIES DELTA PRBN SERIESSTPN
MODEL CREW L/DAY
KGBOD/ DAY
210 10 2100 0,60
420 20 4200 1,20
630 30 6300 1,80
945 45 9450 2,70
1260 60 12600 3,60
1680 80 16800 4,80
2100 100 21000 6,00
2590 123 25900 7,40
2940 140 29400 8,40
3375 161 33750 9,64
4050 180 40500 10,80
4305 205 43050 12,30
4830 230 48300 13,80
5400 257 54000 15,43
5985 285 59850 17,10
6615 315 66150 18,90
7245 345 72450 20,70
7875 375 78750 22,50
8400 400 84000 24,00
PRBN-MODEL
CREW L/DAY KG
BOD/ DAY
70 10 700 0,50
105 15 1050 0,75
140 20 1400 1,00
175 25 1750 1,25
210 30 2100 1,50
280 40 2800 2,00
350 50 3500 2,50
420 60 4200 3,00
490 70 4900 3,50
560 80 5600 4,00
630 90 6300 4,50
735 105 7350 5,25
875 125 8750 6,25
1200 171 11998 8,57
1400 200 14000 10,00
1575 225 15750 11,25
1750 250 17500 12,50
1925 275 19250 13,75
2100 300 21000 15,00
2380 340 23800 17,00
2590 370 25900 18,50
2800 400 28000 20,00
2940 420 29400 21,00
DETEGASATel: +34-981494000Fax: +34-981486352www.detegasa.comcommercial@detegasa.com
Sewage Treatment Plants
Membranes are a physical barrier to any solid or pollutantLatest state of art technology on water filtration.
Reliable technology and excellent quality of the effluent.
DELTA
Main Features & AdvantagesMain Features & AdvantagesMitsubishi Rayon Membranes
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
ISO 9001
BUREAU VERITASCertification
IMO MEPC 159(55) & MEPC 227(64) MED Type Approved
No chemicals required for disinfection stage
MEMBRANES
I II
III
Membrane Bio-Reactor STP.
I.Collecting tank: Reception of sewage and grey water.
II.Aerobic Tank: Where the biological process takes place
III. Membranes Tank: Physical barrier for all suspended solids and bacteria.
DELTA
Automatic backflushing.
Submerged Membranes.
Ideal for large crew vessels.
Environmentally friendly technology.
Fully customizable solutions.
Model
PRM- Hydraulic Load (lts/day)
Organic Load
(kg BOD/Day) Crew Members
21 2100 6 100
42 4200 12 200
74 74000 21 352
105 105000 30 500
137 136500 39 650
168 168000 48 800
210 210000 60 1000
DETEGASATel: +34-981494000Fax: +34-981486352www.detegasa.comcommercial@detegasa.com
Marine IncineratorsIMO MEPC 76(40) MED Type Approved
Total automatic controlWide range of models available and broad list of references worldwide.
Containerized solutions available upon requestEasy maintenance
DELTA
Main Features & AdvantagesMain Features & AdvantagesFully dismountable for easy retrofitting.
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
ISO 9001
BUREAU VERITASCertification
Marine Incinerators
Capability to burn solids and sludge simultaneously
PLC Touch Screen Monitor
Simple and reliable operation
Large number of references in Offshore, Commercial and Navy vessels.
IRA- Models meant to burn only solids IRLA- Meant to burn sludge & solids
DELTA
Bilge water injection systems & Remote monitoring systems
New!
INCINERATOR MODELS IRA- IRLA- IRA- IRLA- IRA- IRLA- IRA- IRLA- IRA- IRLA- IRA- IRLA- IRA- IRLA-
IRA/IRLA- 10 18 30 50 65 80 100 KCAL/H 100.000 180.000 300.000 500.000 650.000 800.000 1.000.000
KW 116 209 349 581 756 930 1.163 IMO Sludge
(L/H) - 13 - 23 - 39 - 65 - 84 - 103 - 130
Solid Waste (KG/H) 25 35 50 80 130 150 175
MAX. Burner Consumption
(kg/h) 8,5 14,8 14,8 20 30 40 55
MAX. Electric Power (kw) 6,00 12,70 8,00 14,70 8,00 14,70 11,50 23,00 22,60 34,20 31,70 43,30 31,70 43,30
Aprox incinerator weight (kg)
1510 1550 1510 1550 2850 3110 2850 3110 5800 5850 5800 5850 7950 8000
Fan weight 205 230 230 350 397 545 600
DETEGASATel: +34-981494000Fax: +34-981486352www.detegasa.comcommercial@detegasa.com
Oily Water SeparatorsIMO MEPC 107(49) MED Type approved
DELTA
Main Features & AdvantagesMain Features & AdvantagesDetegasa’s Oily Water Separators are designed to ensure a smooth operation on boardReliable Performance.Easy Installation and low maintenance requiredCustomized solutions to comply with different hazardous zones andmilitary requirements.
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
ISO 9001
BUREAU VERITASCertification
5ppm’s
Feature Available
Oily Water Separators
The first stage consists on separating the free hydrocarbons on the gravity separator,
whereas the second stage treats the emulsions, if any, by an adsorption process.
DELTA
OWSAN-0,5 OWSAN-5 OWSAN-10
SEPARATOR
MODELS
CAPACITIES
(m3/h)
L
(mm)
H
(mm)
W
(mm)
OWSAN-0,5 0,5 1122 1342 984
OWSAN-0,1 1 1125 1410 975
OWSAN-2,5 2,5 1512 1792 1287
OWSAN-5 5 1865 2080 1615
OWSAN-7,5 7,5 2388 2309 1858
OWSAN-10 10 2566 2447 2102
Helicopter Refueling SytemsDesigned according to CAP 437
Laydown skid
Portable tanksVertical tanks with rectangular frames, manufactured in stainless steel.
Standar con�guration for 2900Lts capacity.
The tanks are type approved by DNV and can be o�ered in di�erent capacities.
The tanks have been designed according to the following regulations:
DNV 2.7-1 (transport related requirements for o�shore containers)
EN 12079
IMDG- T4 (for transportation of hazardous materials)
ASME VIII Div1 (for pressure vessels)
The laydown skid, has been designed to install the portable tanks, the static storage tanks and the pump unit.
Components are to be protected by a deluge system against �re
The skid is manufactured in mild steel in a continuous welded construction, in order to form a rugged unit.
The skid is equipped with a drip tray over the whole area, lifting lugs, bu�er frame and deluge with spray nozzles.
The skid can be customized for di�erent con�gurations.
DELTA
Dispenser unit
The dispenser unit has been designed following safe and easy operation parameters.
The dispensing unit normally includes a Filter Separator (API1581) and Water Monitor (API1583) or a combined Three-Stage Filter Vessel (API1583), Flow Meter, Local Control Panel, Filling Nozzle, Grounding System, Manual or Automatic Hose Reel and Yellow Amber Flashing Light.
Dispensing module can be customized accor-ding to the project requirements.
Components are cased in a water proof cabinet with a roller shutter door.
According to CAP 437 latest edition, May 2012, all systems should be equiped with a twin pump, in order to provide redundancy in case one pump fails in service.
The standard pump is intended to transfer fuel from the Fuel Tank(s) through the dispensing unit at a minimum �ow rate of 225 litters/min at 3,5 bar pressure.
Customization is also available.
Pumps unit
Suitable for different types of fuel: Jet A-1, JP5, JP8, AVCAT, TR1- Optional defueling system- Additive dossing system available- Components according to hazardous zone regulations- Full support during all stages of the project & onsite commissioning- Filtration EI 1581 & 1583 compliant.
Other features
Customizable according to Class Society
DETEGASATel: +34-981494000Fax: +34-981486352www.detegasa.comcommercial@detegasa.com
Different heating sources available: Electric, Steam or Thermal OilIncludes a continuous controlled system to maintain the desired temperature
Customized solutions to comply with different hazardous zonesConstruction in different materials is available.
DELTA
Main Features & AdvantagesMain Features & AdvantagesCan be supplied skid mounted or in a modular solution with other items
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
POTABLE WATERHEATERS
Different heating capacities and volumes available.
Design for pressure vessels
according to main
Classification Societies.
DETEGASATel: +34981494000Fax: +34981486352www.detegasa.comcommercial@detegasa.com
Installed components from first class brands.Water supply at a constant pressure within the ship.
Customized solutions to comply with different hazardous zones.Shell in Stainless Steel or Galvanized Steel available.
DELTA
Main Features & AdvantagesMain Features & AdvantagesCan be supplied skid mounted or in a modular solution with other items.
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain
HYDROPHOREGROUPS
References in the offshore and militar sector complying with strict regulations.
Design for pressure vessels
according to main
Classification Societies.
DELTA
NAVY VESSELS
Australian Landing Helicopter Dock(2x Vessels)Air Warefare Destroyer (3x Vessels)
Landing Helicopter DockProvision Warships (2x Vessels)
Combat Replenishment ship (4x Vessels)Landing Plattform Dock (2x Vessels)
F-100 Class Frigates (5x Vessels
Fridtjof Nansens F-300 Class Frigates (5x Vessels)
CASE STUDIES
DETEGASA designs for warships, are thought to fit in extreme conditions, with reduced space and weight constraints, in addition to other requirements such as shock, vibrations, noise, electromagnetic compatibility, etc., as well as being equipment designed according to high reliability and maintainability criteria. The equipment quality level and operating reliability are remarkably high, just like the demands of documentation, project management, logistic documentation, traceability, certifications, etcAs an example of DETEGASA’s capabilities, the company has supplied over 60 sewage treatment plants for warships, most of them installed in extremely narrow locations, the strictest design and operation requirements as normal in a warship. On the other hand, DETEGASA has participated as well in huge defence programs for the Norwegian, Australian and Spanish Navies.
AQAP/PECAL 2110 CERTIFIED
SPANISH NAVY-NORWEGIAN NAVY- AUSTRALIAN NAVY- RUSSIAN NAVY- PERUVIAN NAVY- CHILEAN NAVY-ROYAL DUTCH NAVY- ROYAL BRITISH NAVY- THAI NAVY- INDONESIAN NAVY-ARGENTINIAN NAVY
Spanish Navy
Norwegian Navy
Australian Navy
Over 20 years providing maintenance services to the Spanish Navy vessels in
all the bases throughout the country
DELTA
OFFSHORE INDUSTRIES
Case Study: Total OffshoreAmong other Platforms, Detegasa has supplied its equipment to the MOHO and Clov projects for Total Offshore. The projects required a great level of customization, logistic documentation and compliance with hazardous zones.
Thanks to a team of dedicated engineers with specific skills in different areas, DETEGASA has achieved a high performance in the optimization of equipment, to reduce the operational risks and increase efficiency in rough environments.Environmental and safety issues are two pillars in the offshore sector which DETEGASA has internalized to its foundations and right now, thanks to the continuous upgrading of its products and processes and the identification of needs through a broad experience in the sector, Detegasa has become one key player in the global market for offshore industries.Customization, compliance with different hazardous areas, automation, optimized design to ensure longer life cycles and low maintenance of the equipment are some of the features that Detegasa can achieve throughout project development for this sector.
Shanghai Shipyard for Opus Offshore.
Detegasa has successfully supplied its Helicopter Refueling System to the sister drillships Tiger I, II, III & IV built in Shanghai Shipyard for Opus Offshore.
DELTA
I
In addition to its expertise in Offshore and Military applications, DETEGASA has also achieved a high level of in-series production skills and economies of scale through its two facilities located in the northwest (Galicia) of Spain, allowing the company to be one of the most competitive players in the market.Renowned ship-owners in the Far East, Europe and South America have chosen DETEGASA units as the most reliable equipment for their fleet.Compliance with most Classification Societies and Class Notations, high quality of the equipment, broad after sales service, together with an endeavor for the protection of the marine environment make DETEGASA the perfect choice for its range of equipment.
Case Study: Amadea Cruise ShipDETEGASA has supplied the incinerator for this project in modules, so that it can pass through the different hatches of the vessel and mounted thereafter in situ.
Furhtermore, as an example, Paxocean, one of the most renowned ship builders in Asia keeps trusting Detegasa in a significant number of their vessels as reliable supplier of sewage treatment plants and incinerators.Moreover, among other clients in the far east, Detegasa continuously supplies major shipbuilding groups like CSSC or CSIC.Notwithstanding, thanks to its world wide network of agents, Detegasa keeps strong presence in European and South American Markets for the shipbuilding industry of commercial vessels.
COMMERCIAL SHIPS
AFFF Fire Fighting StationsAFFF Foam Hose ReelsHydraulic Foldable Safety Nets for Flying DecksHydraulic Foldable BulwarksPhysical Chemical Sewage Treatment PlantsFuel Heaters
Air Pressure FlasksFood Treatment Units
Bow Thruster Coolling SystemsElectronic Equipment Coolling Systems
Automatic Shore Connection ReelsWaste Packing Systems
Thanks to skillful team of engineers with multidisciplinary capabilities, Detegasa has, throughout the years, delivered customized solutions and turnkey projects to its customers.
Plug & play units
Latest state of the art technologies
On-going product development through implementation of improvement programs
CUSTOMIZABLE SOLUTIONS
DELTA
ISO 9001
BUREAU VERITASCertification
ISO 14001
BUREAU VERITAS
DELTA
HEAD OFFICE AGENTS NETWORK
Detegasa has presence in over 40 countries
Quality is our most important commitment
DETEGASATel: +34-981494000Fax: +34-981486352 www.detegasa.comcommercial@detegasa.com
DETEGASACarretera Castro-Meiras S/N
Tuimil-SequeiroValdoviño-15550
Spain