Why Choose Xeridiem?Xeridiem has a 30+ year history in silicone catheter innovation. Our silicone products offer the following:

• Superior biocompatibility

• Visual clarity

• Colorant options

• UV resistant

• Ordered cut-to-length

• Molded to complex geometries

• Extruded in many grades and durometers

• Less expensive than other materials

Lumen and ColorsNo. of Lumen Color

1 Clear2 White

3 (max no. of lumen for 6FR) Blue4 (max no. of lumen for 12FR)5 (max no. of lumen for 16FR)6 (max no. of lumen for 18FR)

StripingCo-extruded Stripe Width

Co-extruded Stripe Width

ToleranceCo-extruded

StripeCo-extrusion

Barium Content

(IN) (IN) COLOR %0.06 ± 0.03 White 0%

Black 17%32%

MaterialsExtrusion Material

Durometer Material Classification Curing System

Shore A50 ± 5 Medical Grade Platinum

50 ± 5 Class VI Platinum60 ± 5 FDA § 177.2600 Peroxide65 ± 5 Medical Grade Platinum65 ± 5 Class VI Platinum70 ± 5 FDA § 177.2600 Peroxide70 ± 5 Class VI Platinum80 ± 5 Class VI Platinum80 ± 5 FDA § 177.2600 Peroxide

Silicone Liquid Injection Molding (LIM) Component Capabilities

LIM Max Shot Size

Min. Tolerance

Mold Base Size

Maximum Daylight

Lim Molding Material Durometer Material

ClassificationCuring System

Shore A(GM) (IN) (IN) (IN) 40 ± 5 Class VI Platinum

50 ± 0.005 7 x 7 660 ± 5 Class VI Platinum70 ± 5 Class VI Platinum

Silicone components are liquid injection molded or transfer molded—transfer molded components are manufactured with high consistency rubber (HCR)

NOTE: This information should serve only as a guide and not a guarantee. Each customer’s conditions and environment for testing and processing may affect test results. The customer is responsible for determining whether this product is fit for their application. It is the customers’ responsibility to protect the environment, health and safety of employees and the purchaser of your products.

DiametersOD Range

RANGE FR SIZE (IN)

Smallest 6 0.078

Largest 32 0.416

ID Range ToleranceRANGE (IN) DIAMETER (IN)

Smallest 0.013 I.D. +/- 0.003

Largest 0.305 O.D. +/- 0.003

Fr is French Catheter Scale (3 Fr = 1 mm diameter)

Spectrum Plastics Group Technical Data Sheet

Silicone Extrusion Tubing & Liquid Injection Molding (LIM) Components