Why Choose Xeridiem?Xeridiem has a 30+ year history in silicone catheter innovation. Our silicone products offer the following:
• Superior biocompatibility
• Visual clarity
• Colorant options
• UV resistant
• Ordered cut-to-length
• Molded to complex geometries
• Extruded in many grades and durometers
• Less expensive than other materials
Lumen and ColorsNo. of Lumen Color
1 Clear2 White
3 (max no. of lumen for 6FR) Blue4 (max no. of lumen for 12FR)5 (max no. of lumen for 16FR)6 (max no. of lumen for 18FR)
StripingCo-extruded Stripe Width
Co-extruded Stripe Width
ToleranceCo-extruded
StripeCo-extrusion
Barium Content
(IN) (IN) COLOR %0.06 ± 0.03 White 0%
Black 17%32%
MaterialsExtrusion Material
Durometer Material Classification Curing System
Shore A50 ± 5 Medical Grade Platinum
50 ± 5 Class VI Platinum60 ± 5 FDA § 177.2600 Peroxide65 ± 5 Medical Grade Platinum65 ± 5 Class VI Platinum70 ± 5 FDA § 177.2600 Peroxide70 ± 5 Class VI Platinum80 ± 5 Class VI Platinum80 ± 5 FDA § 177.2600 Peroxide
Silicone Liquid Injection Molding (LIM) Component Capabilities
LIM Max Shot Size
Min. Tolerance
Mold Base Size
Maximum Daylight
Lim Molding Material Durometer Material
ClassificationCuring System
Shore A(GM) (IN) (IN) (IN) 40 ± 5 Class VI Platinum
50 ± 0.005 7 x 7 660 ± 5 Class VI Platinum70 ± 5 Class VI Platinum
Silicone components are liquid injection molded or transfer molded—transfer molded components are manufactured with high consistency rubber (HCR)
NOTE: This information should serve only as a guide and not a guarantee. Each customer’s conditions and environment for testing and processing may affect test results. The customer is responsible for determining whether this product is fit for their application. It is the customers’ responsibility to protect the environment, health and safety of employees and the purchaser of your products.
DiametersOD Range
RANGE FR SIZE (IN)
Smallest 6 0.078
Largest 32 0.416
ID Range ToleranceRANGE (IN) DIAMETER (IN)
Smallest 0.013 I.D. +/- 0.003
Largest 0.305 O.D. +/- 0.003
Fr is French Catheter Scale (3 Fr = 1 mm diameter)
Spectrum Plastics Group Technical Data Sheet
Silicone Extrusion Tubing & Liquid Injection Molding (LIM) Components