Corporate Headquarters • 4310 North Sam Houston Parkway East • Houston, TX 77032 • 281 602 7815 • www.innovex-inc.comThis document contains Confidential and Proprietary information which is the property of Innovex Downhole Solutions. © 2018 Innovex. All rights reserved.

Super Pack

Super Pack offers superior well controland safety to traditional packoffs with theability to run and land through the BOPstack. Slip hanger space-out issues arenow eliminated as the hanger lands in thesame location every time ensuring easyflowline make-up.

A split packing set is easily installedwithin a small 12” cable work area. Sealsare energized using the top bolts and canbe re-energized later if required.

On reruns, the ESP cable can be easilyremoved from the bottom of the hangerby removing the lower retainer. Thisalleviates the challenge of removing thepackoff from a top pocket.

The 7-1/16” Tubing Hanger is designed tofit in all major brands of wellhead and canbe used in 5,000 and 10,000 PSI TubingSpools.

Hanger comes standard with a 3/8” NPTport to support capillary lines. Plugs areprovided if no line is used.

FEATURES / BENEFITS• Hanger lands through the BOP for full well control

• Consistent flowline height based off hanger landing in spool. No need to measure and then set slips for correct height

• Increased safety by not having hands in between the elevators and a slip type hanger

• No damage or deterioration to the tubing string due to the slips holding string weight

• Universal tubing hanger design fits in most tubing spools

• Reliability increased by not having any conductive material surrounding the cable

• Increased safety by not having to strip the cable through the BOP during installation

• Overall lower tree height by being able to land into customer’s tubing head

• Hanger ported for capillary line

• ESP Packing and cable can be easily removed from the bottom of the hanger

Corporate Headquarters • 4310 North Sam Houston Parkway East • Houston, TX 77032 • 281 602 7815 • www.innovex-inc.comThis document contains Confidential and Proprietary information which is the property of Innovex Downhole Solutions. © 2018 Innovex. All rights reserved.

SuperPack_112519

Super Pack

• The Super Pack hanger will fit all 7-1/16” 5,000 and 10,000 PSI wellhead designs

• Pressure: Rated to 1500 PSI

• Temp: 200°F (93°C) -70°F (-56°C)

• For use with all 7” and 5-1/2” 17 lbs/ft or lighter production casings

Retainer Plate

Packing Set

7-1/16” UniversalTubing Hanger

Spacer Sleeve

Screws

SPECIFICATIONS