Post on 21-Jan-2021
transcript
Surface Preparation
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Parson offers complete line of Accelerators, Primers and De-Bonder for Cyanoacrylate adhesives. PARFIX accelerators are designed to increase the cure speed and gap-filling capabilities of cyanoacrylate adhesives. The surface properties of some materials are acidic or contain very low moisture content which slow down the curing of cyanoacrylate adhesives.
PARFIX accelerator is formulated to harden CA in ten seconds or less and it also helps to cure excess CA that oozes out of joints during assembly. PARFIX accelerator can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly.
PARFIX primers are formulated to insure cure on inactive surfaces and increase the adhesion on low energy surfaces.
P R O P E R T I E S TA B L E
ProductPARFIX
PartNumber
Packing Color Viscosity,cps
On Part Life Dry Time Application
3712 10252102541025910250
2 oz bottle4 oz bottle
1 gallon55 gallon
Clear/amber 1 1 min. < 30 sec. AllCyanoacrylate
Adhesives
1155 11552115541144711551115551155311550
2 oz bottle4 oz bottle
12 oz Aerosol16 oz bottle
1 gallon5 gallon
55 gallon
Clear/amber 0.5 1 min. < 30 sec. AllCyanoacrylate
Adhesives
3793 379323793437939
2 oz bottle4 oz bottle
1 gallon
Light amber 3 <2 hrs. < 10 min. Primer forCyanoacrylate
Adhesives
3109 310923109431099
2 oz bottle4 oz bottle
1 gallon
Clear/amber 3 1 min. < 5 sec. AllCyanoacrylate
Adhesives
1144 11442114461144111445
2 oz bottle6 oz Aerosol1 gallon can
5 gallon drum
Amber 2 7 days 30 -70 sec. AllCyanoacrylate
Adhesives
1122 112211122211229
1 oz bottle2 oz bottle
1 gallon
Clear/amber 1 -------- < 30 sec. De-Bonder for Cyanoacrylate Adhesives
3770 3770237704
2 oz bottle4 oz bottle
Clear/amber 1 2 hrs. < 30 sec. Primer for CyanoacrylateAdhesives
PARSON ADHESIVES, INC. Sales Office: 3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAPhone (248) 299-5585 • Fax (248) 299-3846Manufacturing Plant: 2545 Eastside Park Road Evansville, IN 47715 USA Email: sales@parsonadhesives.com • Web Site: www.parsonadhesives.com
PARFIXTM Cyanoacrylate Adhesives
PARSON is one of the leading manufacturer of high quality cyanoacrylate adhesives for wide variety of industrial assembly applications. Parfix range of cyanoacrylate
adhesives are triple distilled to provide the highest industrial strength with consistent performance for every assembly applications. Parfix cyanoacrylate adhesives
are available from 3 gram tube to 200 kg drum packing. We also offer extensive private label services with no minimum quantity requirements.
PARSON also manufactures following engineering and structural adhesives:
• SONLOK Anaerobic Adhesives • PARTITE Methacrylate & Structural Acrylic Adhesives • PARLITE UV Curable Adhesives
• PARBOND Epoxy & Polyurethane Adhesives • PARSEAL Impregnation Sealant
We supply these adhesives to wide variety of industries such as the Automotive, Aerospace, Railway, Marine, Electronics, Sporting Goods, Oil & Gas, Sign & Display,
Medical Device, Printing & Graphics, Furniture, Construction, Transmission & Engine Products and General Assembly. PARSON has more than 1,200 customers in 43
different countries around the world.
• ISO 9001 : 2000 Certified Company • DVGW Certified Company • ROHS Compliance • SGS Certified
CERT GMBH
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3380 33801338023380633800
1 oz2 oz1 lb
44 lbs
Industrial Parts Black .005” Toughened Ethyl 200 Fixture - 60 sec.Full - 24 hours
3382 33821338223382633820
1 oz2 oz1 lb
44 lbs
Wire Tacking Clear .008” Modified Ethyl 5000 Fixture - 25 sec.Full - 24 hours
3401 340113401234018340163401734010
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
General Purpose Clear .005” SurfaceInsensitive
Ethyl
110 Fixture - 12 sec.Full - 24 hours
3403 340313403234038340363403734030
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Critical, Cosmetic Parts
Clear .008” Alkoxy-Ethyllow odor/low
bloom
1,000 Fixture - 40 sec.Full - 24 hours
3404 340413404234048340463404734040
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Rubber and Plastic Parts
Clear .005” Modified Ethyl 80 Fixture - 30 sec.Full - 24 hours
3406 340613406234068340663406734060
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .003” SurfaceInsensitive
Ethyl
20 Fixture - 12 sec.Full - 24 hours
3408 340813408234088340863408734080
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .002” Alkoxy-EthylLow odor/Low
bloom
5 Fixture - 40 sec.Full - 24 hours
3409 34093340913409634090
3 gm20 gm
300 gm44 lbs
General PurposeIndustrial
Clear .010” EthylCyanoacrylate
Gel Fixture - 70 sec.Full - 24 hours
3410 34101341023410634107
1 oz2 oz1 lb
4.4 lb
Industrial Parts Manufacturing
Black .008” RubberToughened
Ethyl
3,500 Fixture - 85 sec.Full - 24 hours
3411 341113411234118341163411734110
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
High Impact and Shock Resistance
Clear .009” RubberToughened
Ethyl
5,000 Fixture - 28 sec.Full - 24 hours
3412 34121341223412634120
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” General PurposeEthyl
3 Fixture - 12 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3414 341413414234148341463414734140
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .006” Modified Ethyl 110 Fixture - 20 sec.Full - 24 hours
3415 341513415634150
1 oz1 lb
44 lbs
Metal Parts Clear .008” MethylCyanoacrylate
3,600 Fixture - 28 sec.Full - 24 hours
3416 3416134162341663416734160
1 oz2 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” Modified Ethyl 1,500 Fixture - 30 sec.Full - 24 hours
3417 34171341723417634170
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” EthylCyanoacrylate
3 Fixture - 20 sec.Full - 24 hours
3420 34201342023420634200
1 oz2 oz1 lb
44 lbs
Plastic Parts Clear .002” EthylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3422 342213422234228342263422734220
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” EthylCyanoacrylate
3,200 Fixture - 20 sec.Full - 24 hours
3426 34263342613426634260
3 gm20 gm
300 gm44 lbs
High Performance
Industrial
Black .010” RubberToughened
Ethyl
Gel Fixture - 20 sec.Full - 24 hours
3430 34301343023430634300
1 oz2 oz1 lb
44 lbs
Metal Parts Clear .005” MethylCyanoacrylate
80 Fixture - 28 sec.Full - 24 hours
3431 343113431234316
1 oz2 oz1 lb
General Purpose
Clear .005” ModifiedEthyl
1000 Fixture - 14 sec.Full - 24 hours
3444 34441344423444634440
1 oz2 oz1 lb
44 lb
Wire Tacking Clear .007” High Temperature
Ethyl
700 Fixture - 28 sec.Full - 24 hours
3454 34543345413454634540
3 gm20 gm
300 gm44 lb
Wide variety of surfaces
Clear 0.10” Surface Insensitive Ethyl
Gel Fixture - 15 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cyanoacrylate Adhesives
Cure Speed varies with substrates
ProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3460 346013460634600
1 oz1 lb
44 lb
Low odor/Low bloom Clear .004” Alkoxy-EthylCyanoacrylate
45 Fixture - 50 sec.Full - 24 hours
3480 3480134802348063480734800
1 oz2 oz1 lb
4.4 lb44 lbs
Industrial PartsManufacturing
Black .006” ToughenedEthyl
300 Fixture - 80 sec.Full - 24 hours
3493 349313493634930
1 oz2 oz44 lb
Low ViscosityMetal Bonder
Clear .002” MethylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3495 34951349523495634950
1 oz2 oz1 lb
44 lb
General PurposeIndustrial
Clear .004” EthylCyanoacrylate
45 Fixture - 20 sec.Full - 24 hours
3496 349613496634960
1 oz1 lb
44 lbs
Rubber and Metal Parts
Clear .006” MethylCyanoacrylate
125 Fixture - 25 sec.Full - 24 hours
3498 349813498634987
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .007” Modified Ethyl 500 Fixture - 45 sec.Full - 24 hours
3499 3499134996
20 gm300 gm
High TemperatureResistance Gel
Clear .010” Modified Ethyl Gel Fixture - 70 sec.Full - 24 hours
3203 320213202632037
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .005” Modified Ethyl 375 Fixture - 30 sec.Full - 24 hours
3204 320413204632047
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .008” Modified Ethyl 4,000 Fixture - 30 sec.Full - 24 hours
3205 3205132056
20 gm300 gm
High TemperatureResistance
Clear .010” Modified SurfaceInsensitive Ethyl
Gel Fixture - 30 sec.Full - 24 hours
3210 321013210632107
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .005” RubberToughened
Ethyl
160 Fixture - 100 sec.Full - 24 hours
3211 321113211632117
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .007” RubberToughened
Ethyl
2,500 Fixture - 200 sec.Full - 24 hours
3212 3212132126
20 gm300 gm
High TemperatureResistance
Black .008” RubberToughened Ethyl
11,000 Fixture - 345 sec.Full - 24 hours
3471 34711347163471734710
1 oz1 lb
4.4 lbs44 lb
Variety of surfaces Clear .007” SurfaceInsensitive
Ethyl
600 Fixture - 10 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3380 33801338023380633800
1 oz2 oz1 lb
44 lbs
Industrial Parts Black .005” Toughened Ethyl 200 Fixture - 60 sec.Full - 24 hours
3382 33821338223382633820
1 oz2 oz1 lb
44 lbs
Wire Tacking Clear .008” Modified Ethyl 5000 Fixture - 25 sec.Full - 24 hours
3401 340113401234018340163401734010
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
General Purpose Clear .005” SurfaceInsensitive
Ethyl
110 Fixture - 12 sec.Full - 24 hours
3403 340313403234038340363403734030
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Critical, Cosmetic Parts
Clear .008” Alkoxy-Ethyllow odor/low
bloom
1,000 Fixture - 40 sec.Full - 24 hours
3404 340413404234048340463404734040
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Rubber and Plastic Parts
Clear .005” Modified Ethyl 80 Fixture - 30 sec.Full - 24 hours
3406 340613406234068340663406734060
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .003” SurfaceInsensitive
Ethyl
20 Fixture - 12 sec.Full - 24 hours
3408 340813408234088340863408734080
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .002” Alkoxy-EthylLow odor/Low
bloom
5 Fixture - 40 sec.Full - 24 hours
3409 34093340913409634090
3 gm20 gm
300 gm44 lbs
General PurposeIndustrial
Clear .010” EthylCyanoacrylate
Gel Fixture - 70 sec.Full - 24 hours
3410 34101341023410634107
1 oz2 oz1 lb
4.4 lb
Industrial Parts Manufacturing
Black .008” RubberToughened
Ethyl
3,500 Fixture - 85 sec.Full - 24 hours
3411 341113411234118341163411734110
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
High Impact and Shock Resistance
Clear .009” RubberToughened
Ethyl
5,000 Fixture - 28 sec.Full - 24 hours
3412 34121341223412634120
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” General PurposeEthyl
3 Fixture - 12 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3414 341413414234148341463414734140
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .006” Modified Ethyl 110 Fixture - 20 sec.Full - 24 hours
3415 341513415634150
1 oz1 lb
44 lbs
Metal Parts Clear .008” MethylCyanoacrylate
3,600 Fixture - 28 sec.Full - 24 hours
3416 3416134162341663416734160
1 oz2 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” Modified Ethyl 1,500 Fixture - 30 sec.Full - 24 hours
3417 34171341723417634170
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” EthylCyanoacrylate
3 Fixture - 20 sec.Full - 24 hours
3420 34201342023420634200
1 oz2 oz1 lb
44 lbs
Plastic Parts Clear .002” EthylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3422 342213422234228342263422734220
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” EthylCyanoacrylate
3,200 Fixture - 20 sec.Full - 24 hours
3426 34263342613426634260
3 gm20 gm
300 gm44 lbs
High Performance
Industrial
Black .010” RubberToughened
Ethyl
Gel Fixture - 20 sec.Full - 24 hours
3430 34301343023430634300
1 oz2 oz1 lb
44 lbs
Metal Parts Clear .005” MethylCyanoacrylate
80 Fixture - 28 sec.Full - 24 hours
3431 343113431234316
1 oz2 oz1 lb
General Purpose
Clear .005” ModifiedEthyl
1000 Fixture - 14 sec.Full - 24 hours
3444 34441344423444634440
1 oz2 oz1 lb
44 lb
Wire Tacking Clear .007” High Temperature
Ethyl
700 Fixture - 28 sec.Full - 24 hours
3454 34543345413454634540
3 gm20 gm
300 gm44 lb
Wide variety of surfaces
Clear 0.10” Surface Insensitive Ethyl
Gel Fixture - 15 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cyanoacrylate Adhesives
Cure Speed varies with substrates
ProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3460 346013460634600
1 oz1 lb
44 lb
Low odor/Low bloom Clear .004” Alkoxy-EthylCyanoacrylate
45 Fixture - 50 sec.Full - 24 hours
3480 3480134802348063480734800
1 oz2 oz1 lb
4.4 lb44 lbs
Industrial PartsManufacturing
Black .006” ToughenedEthyl
300 Fixture - 80 sec.Full - 24 hours
3493 349313493634930
1 oz2 oz44 lb
Low ViscosityMetal Bonder
Clear .002” MethylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3495 34951349523495634950
1 oz2 oz1 lb
44 lb
General PurposeIndustrial
Clear .004” EthylCyanoacrylate
45 Fixture - 20 sec.Full - 24 hours
3496 349613496634960
1 oz1 lb
44 lbs
Rubber and Metal Parts
Clear .006” MethylCyanoacrylate
125 Fixture - 25 sec.Full - 24 hours
3498 349813498634987
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .007” Modified Ethyl 500 Fixture - 45 sec.Full - 24 hours
3499 3499134996
20 gm300 gm
High TemperatureResistance Gel
Clear .010” Modified Ethyl Gel Fixture - 70 sec.Full - 24 hours
3203 320213202632037
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .005” Modified Ethyl 375 Fixture - 30 sec.Full - 24 hours
3204 320413204632047
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .008” Modified Ethyl 4,000 Fixture - 30 sec.Full - 24 hours
3205 3205132056
20 gm300 gm
High TemperatureResistance
Clear .010” Modified SurfaceInsensitive Ethyl
Gel Fixture - 30 sec.Full - 24 hours
3210 321013210632107
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .005” RubberToughened
Ethyl
160 Fixture - 100 sec.Full - 24 hours
3211 321113211632117
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .007” RubberToughened
Ethyl
2,500 Fixture - 200 sec.Full - 24 hours
3212 3212132126
20 gm300 gm
High TemperatureResistance
Black .008” RubberToughened Ethyl
11,000 Fixture - 345 sec.Full - 24 hours
3471 34711347163471734710
1 oz1 lb
4.4 lbs44 lb
Variety of surfaces Clear .007” SurfaceInsensitive
Ethyl
600 Fixture - 10 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3380 33801338023380633800
1 oz2 oz1 lb
44 lbs
Industrial Parts Black .005” Toughened Ethyl 200 Fixture - 60 sec.Full - 24 hours
3382 33821338223382633820
1 oz2 oz1 lb
44 lbs
Wire Tacking Clear .008” Modified Ethyl 5000 Fixture - 25 sec.Full - 24 hours
3401 340113401234018340163401734010
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
General Purpose Clear .005” SurfaceInsensitive
Ethyl
110 Fixture - 12 sec.Full - 24 hours
3403 340313403234038340363403734030
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Critical, Cosmetic Parts
Clear .008” Alkoxy-Ethyllow odor/low
bloom
1,000 Fixture - 40 sec.Full - 24 hours
3404 340413404234048340463404734040
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Rubber and Plastic Parts
Clear .005” Modified Ethyl 80 Fixture - 30 sec.Full - 24 hours
3406 340613406234068340663406734060
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .003” SurfaceInsensitive
Ethyl
20 Fixture - 12 sec.Full - 24 hours
3408 340813408234088340863408734080
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Wicking Grade Clear .002” Alkoxy-EthylLow odor/Low
bloom
5 Fixture - 40 sec.Full - 24 hours
3409 34093340913409634090
3 gm20 gm
300 gm44 lbs
General PurposeIndustrial
Clear .010” EthylCyanoacrylate
Gel Fixture - 70 sec.Full - 24 hours
3410 34101341023410634107
1 oz2 oz1 lb
4.4 lb
Industrial Parts Manufacturing
Black .008” RubberToughened
Ethyl
3,500 Fixture - 85 sec.Full - 24 hours
3411 341113411234118341163411734110
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
High Impact and Shock Resistance
Clear .009” RubberToughened
Ethyl
5,000 Fixture - 28 sec.Full - 24 hours
3412 34121341223412634120
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” General PurposeEthyl
3 Fixture - 12 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cure Speed varies with substrates
Cyanoacrylate AdhesivesProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3414 341413414234148341463414734140
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .006” Modified Ethyl 110 Fixture - 20 sec.Full - 24 hours
3415 341513415634150
1 oz1 lb
44 lbs
Metal Parts Clear .008” MethylCyanoacrylate
3,600 Fixture - 28 sec.Full - 24 hours
3416 3416134162341663416734160
1 oz2 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” Modified Ethyl 1,500 Fixture - 30 sec.Full - 24 hours
3417 34171341723417634170
1 oz2 oz1 lb
44 lbs
General Purpose Bonding
Clear .002” EthylCyanoacrylate
3 Fixture - 20 sec.Full - 24 hours
3420 34201342023420634200
1 oz2 oz1 lb
44 lbs
Plastic Parts Clear .002” EthylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3422 342213422234228342263422734220
1 oz2 oz8 oz1 lb
4.4 lbs44 lbs
Plastic Parts Clear .008” EthylCyanoacrylate
3,200 Fixture - 20 sec.Full - 24 hours
3426 34263342613426634260
3 gm20 gm
300 gm44 lbs
High Performance
Industrial
Black .010” RubberToughened
Ethyl
Gel Fixture - 20 sec.Full - 24 hours
3430 34301343023430634300
1 oz2 oz1 lb
44 lbs
Metal Parts Clear .005” MethylCyanoacrylate
80 Fixture - 28 sec.Full - 24 hours
3431 343113431234316
1 oz2 oz1 lb
General Purpose
Clear .005” ModifiedEthyl
1000 Fixture - 14 sec.Full - 24 hours
3444 34441344423444634440
1 oz2 oz1 lb
44 lb
Wire Tacking Clear .007” High Temperature
Ethyl
700 Fixture - 28 sec.Full - 24 hours
3454 34543345413454634540
3 gm20 gm
300 gm44 lb
Wide variety of surfaces
Clear 0.10” Surface Insensitive Ethyl
Gel Fixture - 15 sec.Full - 24 hours
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Cyanoacrylate Adhesives
Cure Speed varies with substrates
ProductPARFIX
ItemNumber
Packing Application Color Gap Fill Category Viscosity,cps
Cure Speed
3460 346013460634600
1 oz1 lb
44 lb
Low odor/Low bloom Clear .004” Alkoxy-EthylCyanoacrylate
45 Fixture - 50 sec.Full - 24 hours
3480 3480134802348063480734800
1 oz2 oz1 lb
4.4 lb44 lbs
Industrial PartsManufacturing
Black .006” ToughenedEthyl
300 Fixture - 80 sec.Full - 24 hours
3493 349313493634930
1 oz2 oz44 lb
Low ViscosityMetal Bonder
Clear .002” MethylCyanoacrylate
2 Fixture - 20 sec.Full - 24 hours
3495 34951349523495634950
1 oz2 oz1 lb
44 lb
General PurposeIndustrial
Clear .004” EthylCyanoacrylate
45 Fixture - 20 sec.Full - 24 hours
3496 349613496634960
1 oz1 lb
44 lbs
Rubber and Metal Parts
Clear .006” MethylCyanoacrylate
125 Fixture - 25 sec.Full - 24 hours
3498 349813498634987
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .007” Modified Ethyl 500 Fixture - 45 sec.Full - 24 hours
3499 3499134996
20 gm300 gm
High TemperatureResistance Gel
Clear .010” Modified Ethyl Gel Fixture - 70 sec.Full - 24 hours
3203 320213202632037
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .005” Modified Ethyl 375 Fixture - 30 sec.Full - 24 hours
3204 320413204632047
1 oz1 lb
4.4 lbs
High TemperatureResistance
Clear .008” Modified Ethyl 4,000 Fixture - 30 sec.Full - 24 hours
3205 3205132056
20 gm300 gm
High TemperatureResistance
Clear .010” Modified SurfaceInsensitive Ethyl
Gel Fixture - 30 sec.Full - 24 hours
3210 321013210632107
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .005” RubberToughened
Ethyl
160 Fixture - 100 sec.Full - 24 hours
3211 321113211632117
1 oz1 lb
4.4 lbs
High TemperatureResistance
Black .007” RubberToughened
Ethyl
2,500 Fixture - 200 sec.Full - 24 hours
3212 3212132126
20 gm300 gm
High TemperatureResistance
Black .008” RubberToughened Ethyl
11,000 Fixture - 345 sec.Full - 24 hours
3471 34711347163471734710
1 oz1 lb
4.4 lbs44 lb
Variety of surfaces Clear .007” SurfaceInsensitive
Ethyl
600 Fixture - 10 sec.Full - 24 hours
Surface Preparation
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Parson offers complete line of Accelerators, Primers and De-Bonder for Cyanoacrylate adhesives. PARFIX accelerators are designed to increase the cure speed and gap-filling capabilities of cyanoacrylate adhesives. The surface properties of some materials are acidic or contain very low moisture content which slow down the curing of cyanoacrylate adhesives.
PARFIX accelerator is formulated to harden CA in ten seconds or less and it also helps to cure excess CA that oozes out of joints during assembly. PARFIX accelerator can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly.
PARFIX primers are formulated to insure cure on inactive surfaces and increase the adhesion on low energy surfaces.
P R O P E R T I E S TA B L E
ProductPARFIX
PartNumber
Packing Color Viscosity,cps
On Part Life Dry Time Application
3712 10252102541025910250
2 oz bottle4 oz bottle
1 gallon55 gallon
Clear/amber 1 1 min. < 30 sec. AllCyanoacrylate
Adhesives
1155 11552115541144711551115551155311550
2 oz bottle4 oz bottle
12 oz Aerosol16 oz bottle
1 gallon5 gallon
55 gallon
Clear/amber 0.5 1 min. < 30 sec. AllCyanoacrylate
Adhesives
3793 379323793437939
2 oz bottle4 oz bottle
1 gallon
Light amber 3 <2 hrs. < 10 min. Primer forCyanoacrylate
Adhesives
3109 310923109431099
2 oz bottle4 oz bottle
1 gallon
Clear/amber 3 1 min. < 5 sec. AllCyanoacrylate
Adhesives
1144 11442114461144111445
2 oz bottle6 oz Aerosol1 gallon can
5 gallon drum
Amber 2 7 days 30 -70 sec. AllCyanoacrylate
Adhesives
1122 112211122211229
1 oz bottle2 oz bottle
1 gallon
Clear/amber 1 -------- < 30 sec. De-Bonder for Cyanoacrylate Adhesives
3770 3770237704
2 oz bottle4 oz bottle
Clear/amber 1 2 hrs. < 30 sec. Primer for CyanoacrylateAdhesives
PARSON ADHESIVES, INC. Sales Office: 3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAPhone (248) 299-5585 • Fax (248) 299-3846Manufacturing Plant: 2545 Eastside Park Road Evansville, IN 47715 USA Email: sales@parsonadhesives.com • Web Site: www.parsonadhesives.com
PARFIXTM Cyanoacrylate Adhesives
PARSON is one of the leading manufacturer of high quality cyanoacrylate adhesives for wide variety of industrial assembly applications. Parfix range of cyanoacrylate
adhesives are triple distilled to provide the highest industrial strength with consistent performance for every assembly applications. Parfix cyanoacrylate adhesives
are available from 3 gram tube to 200 kg drum packing. We also offer extensive private label services with no minimum quantity requirements.
PARSON also manufactures following engineering and structural adhesives:
• SONLOK Anaerobic Adhesives • PARTITE Methacrylate & Structural Acrylic Adhesives • PARLITE UV Curable Adhesives
• PARBOND Epoxy & Polyurethane Adhesives • PARSEAL Impregnation Sealant
We supply these adhesives to wide variety of industries such as the Automotive, Aerospace, Railway, Marine, Electronics, Sporting Goods, Oil & Gas, Sign & Display,
Medical Device, Printing & Graphics, Furniture, Construction, Transmission & Engine Products and General Assembly. PARSON has more than 1,200 customers in 43
different countries around the world.
• ISO 9001 : 2000 Certified Company • DVGW Certified Company • ROHS Compliance • SGS Certified
CERT GMBH
Surface Preparation
PA R S O N A D H E S I V E S , I N C .3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAtel: 248-299-5585 • fax: (248) 299-3846 • email: sales@parsonadhesives.com • www.parsonadhesives.com
Parson offers complete line of Accelerators, Primers and De-Bonder for Cyanoacrylate adhesives. PARFIX accelerators are designed to increase the cure speed and gap-filling capabilities of cyanoacrylate adhesives. The surface properties of some materials are acidic or contain very low moisture content which slow down the curing of cyanoacrylate adhesives.
PARFIX accelerator is formulated to harden CA in ten seconds or less and it also helps to cure excess CA that oozes out of joints during assembly. PARFIX accelerator can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly.
PARFIX primers are formulated to insure cure on inactive surfaces and increase the adhesion on low energy surfaces.
P R O P E R T I E S TA B L E
ProductPARFIX
PartNumber
Packing Color Viscosity,cps
On Part Life Dry Time Application
3712 10252102541025910250
2 oz bottle4 oz bottle
1 gallon55 gallon
Clear/amber 1 1 min. < 30 sec. AllCyanoacrylate
Adhesives
1155 11552115541144711551115551155311550
2 oz bottle4 oz bottle
12 oz Aerosol16 oz bottle
1 gallon5 gallon
55 gallon
Clear/amber 0.5 1 min. < 30 sec. AllCyanoacrylate
Adhesives
3793 379323793437939
2 oz bottle4 oz bottle
1 gallon
Light amber 3 <2 hrs. < 10 min. Primer forCyanoacrylate
Adhesives
3109 310923109431099
2 oz bottle4 oz bottle
1 gallon
Clear/amber 3 1 min. < 5 sec. AllCyanoacrylate
Adhesives
1144 11442114461144111445
2 oz bottle6 oz Aerosol1 gallon can
5 gallon drum
Amber 2 7 days 30 -70 sec. AllCyanoacrylate
Adhesives
1122 112211122211229
1 oz bottle2 oz bottle
1 gallon
Clear/amber 1 -------- < 30 sec. De-Bonder for Cyanoacrylate Adhesives
3770 3770237704
2 oz bottle4 oz bottle
Clear/amber 1 2 hrs. < 30 sec. Primer for CyanoacrylateAdhesives
PARSON ADHESIVES, INC. Sales Office: 3345, Auburn Road, Suite 107, Rochester Hills, MI 48309, USAPhone (248) 299-5585 • Fax (248) 299-3846Manufacturing Plant: 2545 Eastside Park Road Evansville, IN 47715 USA Email: sales@parsonadhesives.com • Web Site: www.parsonadhesives.com
PARFIXTM Cyanoacrylate Adhesives
PARSON is one of the leading manufacturer of high quality cyanoacrylate adhesives for wide variety of industrial assembly applications. Parfix range of cyanoacrylate
adhesives are triple distilled to provide the highest industrial strength with consistent performance for every assembly applications. Parfix cyanoacrylate adhesives
are available from 3 gram tube to 200 kg drum packing. We also offer extensive private label services with no minimum quantity requirements.
PARSON also manufactures following engineering and structural adhesives:
• SONLOK Anaerobic Adhesives • PARTITE Methacrylate & Structural Acrylic Adhesives • PARLITE UV Curable Adhesives
• PARBOND Epoxy & Polyurethane Adhesives • PARSEAL Impregnation Sealant
We supply these adhesives to wide variety of industries such as the Automotive, Aerospace, Railway, Marine, Electronics, Sporting Goods, Oil & Gas, Sign & Display,
Medical Device, Printing & Graphics, Furniture, Construction, Transmission & Engine Products and General Assembly. PARSON has more than 1,200 customers in 43
different countries around the world.
• ISO 9001 : 2000 Certified Company • DVGW Certified Company • ROHS Compliance • SGS Certified
CERT GMBH