Post on 12-Mar-2020
transcript
Technical SpecificaTionS and opTionS
SB-2500e Material Transfer Vehicle
The SB-2500e Shuttle Buggy® Material Transfer Vehicle from Roadtec is the result of over 20 years of Roadtec experience with transfer technology. The Shuttle Buggy MTV has been able to set the standard for reliability and performance when it comes to eliminating temperature and material segregation in asphalt mix.
All specifications herein subject to change without notice.
engineCAT® 9.3L, 6 Cylinder C9.3, 300 HP / 224 kW @ 1,900 rpm with one year standard warranty.
300 HP / 224 kW @ 1,900 rpm.
elecTrical SySTem
Electric-over-hydraulic solenoids with manual override.
Two 4D batteries. 115 Amp alternator.
24 Volt system with master disconnect switches.
cooling Quiet operation, dual, variable speed fans provide on demand cooling.
conSTrucTion Heavy-duty conveyor flights and chain. Replacable wear plate in all high wear areas. Stability without unnecessary weight.
Truck dump hopper
Front hopper has swivel support casters. Vibrating floor plate. 9’2” / 2.8 m wide truck opening (adjustable width option available). Hydraulic, adjustable push rollers.Hydraulic front hopper baffle adjustable for optimal material flow.
dump hopper TranSverSe auger 29” / 737 mm o.d. cast, segmented auger.
dump hopper unloading conveyor
Drag conveyor with 1,000 TPH / 907 MTPH capacity. Dual roller bushing chain.Heavy-duty flights 5/8” D x 7” W x 56” L / 16mm D x 178mm W x 1,422mm L. Conveyor floors clad with replacable chromium wear plates.
Surge Bin 25 tons / 22.7 metric tons storage capacity.
remixing auger in Surge Bin 29” / 737mm o.d. cast, segmented augers
Surge Bin unloading conveyor
Drag conveyor with 600 TPH / 544 MTPH capacity. Dual roller bushing chain. Flights 5/8” D x 6-1/2” W x 35-1/2” L / 16mm D x 165mm W x 902mm L. Conveyor floors lined with replacable chrome-carbide clad wear plates.
paver loading conveyor
Drag conveyor with 600 TPH / 544 MTPH capacity. Dual roller bushing chain. Flights 1/2” D x 6-1/2” W x 30” L / 13mm D x 165mm W x 762mm L. Conveyor floors lined with replacable chrome-carbide clad wear plates.Insulated conveyor floor.Controls interlock with surge bin unloading conveyor.Conveyor can be positioned up to 50° to either side of center. Conveyor guard rails.
propulSion Hydrostatic (4)-wheel drive. Front-wheel steer.Continuously variable speed control with two speed ranges.
SpeedS Maximum working speed: 3.0 mph / 4.8 kph.Maximum travel speed: 9 mph / 14.5 kph.
TireS (4) 21” / 533mm wide x 25” / 635mm interior diameter high-flotation tires.
Brake SySTem Hydrodynamic, disc caliper (foot pedal), parking.
operaTor conTrolS Two operator stations (left & right side) with deluxe adjustable seats.Operator stations can slide 16” (400mm) out past edge of machine for visibility.Center control console pivots to right or left operator seat as needed.
ground conTrolS (2) front dump hopper control boxes (one on each side).
fume exTracTion SySTem Clearview FXSTM fume extraction system with dual fans draws fumes away from operator area.
acceSS
One-piece hydraulically raisable hood for quick engine access.Hinged access door to oil cooler, radiator and pumps.Hydraulically operated cleanout doors on all conveyors.Remote lubrication points for all conveyors.
Warning SySTem Amber warning beacon.Back-up alarm
fuel Tank 150 gallons / 568 L capacity.
hydraulic fluid Tank 80 gallons / 303 L capacity.
WaShdoWn SySTem 50 ft / 15.25 m retractable hose on hose reel.
operaTor Sun Shade Includes mounting hardware.
Technical SpecificaTionSSB-2500e Material Transfer Vehicle
opTionS
auxiliary poWer
Available generator sets: 4KW 60 Hz 120V Continuous Duty Hydraulic Generator 4KW 50 Hz 240V Continuous Duty Hydraulic Generator6.2KW 60 Hz Continuous Duty Hydraulic Generator
lighTS
Road Light Package:(6) 24 V lightsPremium Light Package:(5) 500 W halogen lights and (5) outlets located at machine corners and at paver loading conveyor.
maSS floW hopper inSerTS Available for use with any size paver.
luBe SySTem Automated lubrication system.
Truck hiTch Replaces push rollers.
environmenTal Tank Spray doWn SySTem 55 gallon / 208 L tank, pump, 50 ft / 15.25 m retractable hose on hose reel.
auTomaTed releaSe agenT Spray doWn SySTem
Control and pump assembly with (16) spray nozzles on each of the (3) conveyors. Timer-controlled system distributes release agent through each of the (3) nozzle sets. Includes (4) hand wands for external use. (2) at front and 2 at rear of machine. Works with most available release agents. Includes filters on the intake end and in each spray nozzle assembly.
lockaBle conTrol Box coverS Available for ground controls and operator controls
camera SySTem (2) color, night-vision-capable cameras. One on front and one on back of machine.Includes color monitor in waterproof case.
WindroW pick-up head Avalaible instead of or in addition to front truck dump hopper.Includes oscillating front conveyor pivot. Hinged, adjustable scraper edge. Spring activated end gates.
STorage On-board, lockble storage compartments.
addiTional Sun Shade Includes mounting hardware.
Shipping WeighT 78,000 lbs / 35,380 kg
fronT STeering axle Load empty: 43,500 lbs / 19,730 kg Load full: 68,500 lbs / 31,070 kg
rear fixed axle Load empty: 34,500 lbs / 15,650 kg Load full: 68,500 lbs / 26,990 kg
ToTal machine WeighT Load empty: 78,000 lbs / 35,380 kg Load full: 125,000 lbs / 56,700 kg
WeighTS (see back cover for dimensions)
SB-2500e Material Transfer Vehicle
machine dimenSionS SB-2500e
All specifications are subject to change without notice.© Roadtec 2012 Adams
9’9-
3/4”
/ 29
92m
m
11’3
-1/2
” / 3
441m
m
14’4
” / 4
369m
m
34’1
1-1/
4” /
1064
7mm
shi
ppin
g le
ngth
with
pav
er lo
adin
g co
nvey
or r
emov
ed, f
ront
dum
p ho
pper
up.
54’1
0-3/
4” /
1652
7mm
56’1
0” /
1732
5mm
1’10
” / 5
57m
m
7’9-
3/4”
/ 23
79m
m12’ /
366
0mm
34’2
” / 1
0415
mm
shi
ppin
g le
ngth
with
pav
er lo
adin
g co
nvey
or r
emov
ed, f
ront
dum
p ho
pper
dow
n.51
’9”
/ 157
72m
m54
’1-1
/4”
/ 164
91m
m55
’1”
/ 167
87m
m
14’1
1-3/
4” /
4568
mm
9’4”
/ 28
45m
m
1’6-
1/2”
/ 46
8mm
2’5-
3/4”
/ 75
5mm
8-1/
2” /
214m
m
3’ /
914m
min
side
7°
26°