Tilt MountPitched Roof StructureSouth facing on an east west building

TerraGen Environmental Group Inc. 51b Caldari Road, Unit 16, Concord, Ontario L4K 4G3Tel: 905-760-1000 www.terragensolar.ca

T

• Lightweight

• Quick and easy install

• Fewer components

• No rear wind screen

• Customized for every project

• Optional attachments where required

• Adaptable for either standing seam clamps or hanger bolts

• Effective use of roof areas due to flexible row spacing

• Portrait or Landscape capabilities

• Meets all wind and snow load requirements

Advantages

• Suitable for all 60 cell and 72 cell as well as frameless modules

• Module warranties maintained

Overview

AdjustableEnd-Clamp

AdjustableMid-Clamp Cross Adapter Top Rail

Bonding IntegratedSplice

GroundingClip (option one)

GroundingClip (option two) Pre-Assembled Tilt Leg

M8 BoltAssembly

Grounding Lug(optional) Bottom Rail

T-BoltAssembly

Roof Attachment (optional)

1 2 3 4

6 7 8 9

10 1311 12

5

51b Caldari Road, Unit 16Concord, ON L4K 4G3

Tel: 905-760-1000Fax: 905-760-1099

Environmental Group Inc.

T

Base Rail Placement• Roof attachment points are identified and connected

• Base rail is connected to the roof attachment point

• PV array is measured & marked

• Base rails are lined up and joined with splices

Tilt Leg and Top Rail Attachment• Distances between rows are measured and tilt legs

attached to the bottom rails

• Top rails are then attached with patented click-technology

Module Installation• Modules are placed onto the top rails according to

the module manufacturer’s specifications

• Module clamps are installed and cables are placed and secured

InstallationSteps

SystemComponents

www.terragensolar.cainfo@terragensolar.ca

© TerraGen 06/2015design and engineering is subject to change