Toolbox Talk (TBT) Prepared By: HSEQ Team CN.HSEQ.121 16.07.2013.

transcript

Toolbox Talk (TBT)Toolbox Talk (TBT)

Prepared By: HSEQ TeamCN.HSEQ.121

16.07.2013

AgendaAgenda

What is Toolbox Talk? Why TBT is important? Who should present? How to structure? How to deliver a TBT TOP TIPS?

What is What is Toolbox Talk (TBT)Toolbox Talk (TBT)??

Short talks that focus on a specific job/topic carried out by the supervisor or the senior person.

e.g. High pressure testing, manual handling, lifting …

TBT is a two way communication responsibility. Help inform inexperienced workers and provide

reminders to experienced workers of correct control measures.

Why Why TBTTBT is Important is Important??

Why Why TBTTBT is important? is important?

We provide this training to improve the quality of the TBT at AlMansoori & encourage HSEQ to become everyone’s responsibility.

Determine the responsibilities of employees & supervisors.

Allow supervisor and workers to explore the risks of specific HSEQ issues and think about ways to deal with them.

Encourage worker engagement.

TBTTBT Key Message Not Delivered? Key Message Not Delivered?

12-Jan-13

Finger Injury

Crushed the tip of right hand index finger

• Poor Communication

• No Hazard Identification

20-March-2013

Hand and Finger Injury

Crashing his middle finger of Right hand

• Poor Communication• Inadequate Supervision• No Hazard Identification• Insufficient Resources

TBTTBT Key Message Not Delivered? Key Message Not Delivered?

Who should presentWho should present??

Who should present Who should present TBTTBT??

Do not need to be an expert but…• Some experience of training is useful.• Good communication skills are essential.• Presenter needs to be serious about HSEQ and

take the TBT seriously.• Recommended that all crewmembers should be

given an opportunity to prepare and present TBT.

How to structureHow to structure??

How to structure How to structure TBTTBT??

Objectives of the JobBrief the people about the nature of the job, and set the objectives of carrying out the job.

Examples:1- Pressure Testing.2- Spooling.3- Fishing Job.4- Lifting Operations (crane, forklift … etc.).

Plan and Procedures

Decide on the topic, choose something that involves the current job, an accident that has occurred, or something relevant to the audience.* Always follow AlMansoori (HSEQ IMS Procedures & your SOP)

Responsibilities/Supervision- Assign the responsibilities clearly to each person

and ensure that everybody understand then keep monitoring them.

- Activate the two way communication between employee & supervisor.

HAZARDSIdentify anything that has the potential to cause harm/loss by reviewing the risk assessment/THA for the job (Manual handling, lifting … etc.).

Empowered to Stop

Everybody has the right to stop the job if they feel it is unsafe.

“Provide persons working for and on behalf of AlMansoori with necessary training, resources and systems, as well as to empower them to stop any unsafe work.”

Manpower and Skills RequiredAssign sufficient number of employees with the appropriate competency for the job, make sure the assigned person(s) have enough experience and all the required training and certificates.

Equipment to be UsedSelect the proper equipment for the job, inspect it and make sure it is safe to use, then choose the competent person to operate it.

Personnel Protective EquipmentWear the correct and suitable PPE for the job and make sure the person was trained on how to use it.

Permit to Work (PTW)Make sure that you have a PTW when required, such as operations on well head location, confined spaces, welding … etc.

Worksite EnvironmentIdentify the work environment (cold, hot, humidity, slippery etc.) that may affect the job.

Other ActivitiesCheck if there are any other activities (SIMOPS) that may be carried at the same time, in the nearby location that may cause a hazard or interfere with your activities.

Example: Lifting and pressure testing at the same time.

Isolation (lock out)Ensure that Lockout devices identify the individual users, and that:-Discuss the importance of the lock out/tagout.-It is used when performing maintenance or you need the isolation of an energy source e.g. electricity or mechanical.

Access and Exit- Identify all exit routes and ensure they are clear

and unobstructed.- Exit door must be unlocked.- The number of exit routes must be adequate.- Must meet minimum height & width requirements.- Muster point, wind socks & confined spaces to be

clearly set.

No Blame CultureReport any mistake that happened immediately, report all accident, failure, equipment damage, we will not blame you unless there is evidence of intentional.

Other InformationCheck if there is any other information related to the job/topic. That needs to be discussed to ensure the job is successful and harm free.

Encourage Questions and Two Way Discussions- Tell workers to ask any questions as you go along.- Tell them not to be afraid to ask.- At the end of the TBT ask some crew members to

repeat the TBT to verify their understanding.

Remember?Remember?

Allow enough time e.g. 10-15 minutes. Do not assume you need to know all the information –

draw on others’ experience. Do not read from a script. You will lose the interest of

your audience if you do!

How to deliver a How to deliver a TBTTBT Top TipsTop Tips??

How to deliver a How to deliver a TBT TBT Top TipsTop Tips??

Know your material. Do not get side tracked by other topics. Make eye-contact. Make sure your voice carries to the back of the

room. Involve staff using open questions. Summarise key points. Do not speak too quickly or too slowly. Keep an eye on your timings. Translate what you said or ask somebody to do, if

there are different tongue.

Thank You..Thank You..

Any Questions?Any Questions?

Toolbox Talk (TBT) Prepared By: HSEQ Team CN.HSEQ.121 16.07.2013.

Documents