Post on 17-Feb-2022
transcript
The Anglers Resource Shop Reference for Grips and Reel Seatsfeatures 81 handle configurations available from the productscurrently stocked by Anglers Resource. This is the first imagebased source for how finished grips will appear when youchoose to use them on various projects. Suggested layouts areactual photos of handles. Cork, reel seats, arbors and evenwinding checks are shown in position. Included with eachimage are part numbers and a complete order list for any cho-sen configuration.
The Manual provides a one stop source to guide customersthrough the often confusing task of selecting all the pieces in ahandle system that may at times include up to 10 separatecomponents. By asking specific questions and allowing cus-tomers to ”shop” the manual, builders can be sure that whatthe customer sees is what he will get and hobbyists can knowin advance how their projects will look when complete.
We hope you enjoy this tool and look forward to providing anever expanding source for information about our products. Ifyou have any further questions, please email them to info@an-glersresource or call us at 251-943-4491
About this Reference Guide...
SK2 CASTING Reel Seat / Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Casting Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVAIMPORTANT NOTE: NSA Arbors should be shortened approximately 1/8 inch to accept WCS winding checks in casting and spinning bodies.
WCSWCS
NSA16 or 17 (included)
NSA16 or 17 (included)
NSA16 or 17 (included)
RGSK1617RCORDER KIT SKTS16 or 17 AWC
WCS
WCS
WCS
REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hood with Graphite/Nylon Nut, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKTS16 (or 17)
1 ea...RGSK1617RC (or E=EVA)
1 ea..BGK485RC or BGS65RC ( E=EVA)
2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
ORDER LIST1ea...SKTPSM16 (or 17)
1 ea...RGSK1617RC (or E=EVA)
1ea...BGK485RC or BGS65RC (E=EVA)
2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
RGSK1617RCORDER KIT SKTPSM16 or 17 AWC
REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hood with Traditional Metal Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
SK2 CASTING HANDLE WITH SPLIT GRIP AND GRAPHITE/NYLON HOOD & LOCKING NUT
SK2 CASTING HANDLE WITH SPLIT GRIP AND TRADITIONAL METAL HOOD
ORDER LIST 1ea...KSKTS16 (or 17)
1 ea...RGSK1617RC (or E=EVA)
1ea...BGK485RC or BGS65RC(E=EVA)
1ea...BGKS16RC or 17RC (or E=EVA)
2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
RGSK1617RC
Quoted Lengths are for CORK (EVA) only, not cork and seat components combined.Questions visit our website at Anglersresource.net, email: info@anglersresource.net
ORDER KIT KSKTS16 or 17 AWC
BGKS16RC or 17RC
REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Hidden Thread Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
SK2 CASTING HANDLE WITH SPLIT GRIP, HIDDEN THREAD FOREGRIP & GRAPHITE HOOD
SKTPSM16(or 17) = Frosted HoodSKTPSM16B(or 17) = Black HoodSKTPSM16GB (or 17) = Gunsmoke Hood
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)
Lgth = 83mmDia = 28mm
Lgth = 83mmDia = 28mm
Lgth = 83mmDia = 28mm
PAGE 3
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
REF# RSK01
REF# RSK02
REF# RSK03
ORDER LIST1 ea...SKTS16 (or 17)
1 ea...RGSK1617RC (or E=EVA)
1 ea...BGK485R C or BGS65RC
(or E=EVA)
1 ea...FGS2RC (or E=EVA)
3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX:
RGSK1617RCORDER KIT SKTS16 or 17 AWCAWC
FGS2RC
AWC
REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Graphite/Nylon Hood & Nut, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
SK2 CASTING HANDLE WITH SPLIT GRIP, UNIVERSAL FOREGRIP & GRAPHITE HOOD & NUT
WCS
ORDER LIST1ea...SKTPSM16 (or 17)
1 ea...RGSK1617RC (or E=EVA)
1ea...BGK485RC or BGS65RC
(or E=EVA)
1ea...FGS2RC (or E=EVA)
3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWCB12.5 = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
RGSK1617RCORDER KIT SKTPSM16 or 17 AWCFGS2RC
REEL SEAT KIT INCLUDES: Trigger Body, Downlocking Traditional Metal Hood, Threaded Barrel and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
SK2 CASTING HANDLE WITH SPLIT GRIP, UNIVERSAL FOREGRIP & TRADITIONAL HOOD
SKTPSM16(or 17) = Frosted HoodSKTPSM16B(or 17) = Black HoodSKTPSM16GB (or 17) = Gunsmoke Hood
WCS
WCS
NSA16 or 17 (included)
NSA16 or 17 (included)
ORDER LIST1ea...SKTS16/B (or 17)
1 ea...RGSK1617RC (or E=EVA)
1ea...BGK485RC or BGS65RC
(or E=EVA)
1ea...KDPS16ASH (or 17)
1ea...SKSPSN16 (or 17)
1ea...FGK25(or 27)RC (or E=EVA)
3ea...NSA16 (or 17)
3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
RGSK1617RCSKTS16 or 17/BSKSPSN16 or 17
KDPS16 or 17 ASHFGK25RC (size 16)FGK27RC (size 17) AWC
AWC
THIS IS NOT A KIT: Order all pieces shown in the order list at left.
SK2 CASTING HANDLE WITH SPLIT GRIP AND “KDPS” HIDDEN THEAD FOREGRIP
KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood
SK2 CASTING Reel Seat / Grip Con�gurations (continued)
Lgth = 83mmDia = 28mm
Lgth = 51mmDia = 25.5mm
Lgth = 83mmDia = 28mm
Lgth = 51mmDia = 25.5mm
Lgth = 83mmDia = 28mm
Lgth = 51mmDia = 25.5mm
KDPS is a tubed hood with matching cork sleeve.Positioned properly it can completely cover threaded barrels on many handle designs.
NSA16 (or 17)
PAGE 4
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
REF# RSK04
REF# RSK05
REF# RSK06
(A)18mm
Tenon length should be between 2 and 6 mm
Handle length and pro�le of any design
(B)1
5mm
For size 17 KSKTS dimension “A” = 20mm, “B” = 17
IMPORTANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EVA FOR SK2 CASTING SEATS
WCS
ORDER LIST1ea...SKTS16/B (or 17)
1 ea...RGSK1617RC (or E=EVA)
1ea...BGK485RC or BGS65RC
(or E=EVA)
1ea...HPS16N (or 17)
1ea...SKSPSN16 (or 17)
1ea...FGH25(or 27)C (or E=EVA)
3ea...NSA16 (or 17)
2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
RGSK1617RCSKTS16 or 17/BSKSPSN16 or 17
HPS16 or 17NFGH25C (size 16)FGH27C (size 17) AWC
THIS IS NOT A KIT: Order all pieces shown in the order list at left.
SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP
Lgth = 83mmDia = 28mmLgth = 64mm (16), 70mm (17)
Dia = 28mm (16), 30mm (17)NSA16 (or 17)
SK2 CASTING Reel Seat / Grip Con�gurations(continued)
HPS Hidden Thread Hoods can be used any time it is desireable to cover threads on any handle design. The unique design of the HPS allows it to tighten and hold the reel foot at any point along the full circumference of the hood. There is no “pocket” to accept the reel foot. 100% graphite/nylon construction makes this seat totally corrosion proof and one of the lightest reel seat components in Fuji’s line.
BGKSRC is a shorter SK2 butt cap suitable for light and ultralight layouts using size 16 SK2 seats. It can be used in any con�guration above but should be selected only for rod blanks under 1/2-inch in butt diameter. Also available in EVA, BGKSE
HPS Hidden Thread Hood uses a tubed seat design with matching cork sleeve. Threaded Barrel is “hidden” in tube when tighten on the reel foot.
PAGE 5
BGK485RC or BGS65RC (Extended)
485 Lngth = 2 in6 5 Lngth = 2.5 inDia = up to 28mm
For size 16 KSKTS
REF# RSK07
ASTING RSK2 C
t / Greel SASTING R
tionson�gurip C
GE 5AP
BGK485R 1ea...
(or E=EVRGSK1617RC 1 ea...
SKTS16/B (or 17)1ea...
ORDER LIST
SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP
tinued)on(cASTING RSK2 C
e 17)FGH27C (size 16)FGH25C (siz HPS16 or 17N
A) V VA)
SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP
tinued)t / Greaeel SASTING R
HPS16 or 17N
SKSPSN16 or 17S16 or 17/BTSK
SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP
tionsaon�gurip Ct / Gr
CGSK1617RR
SK2 CASTING HANDLE WITH SPLIT GRIP AND “HPS” HIDDEN THEAD FOREGRIP
tions
CAW
ended) tC (Exor BGS65RC BGK485R
12.5mm I.D.WC12.5B = Blu 16.5mm) EX: A W
half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Red,Blue,Silver or CAW2ea...
NSA16 (or 17)3ea...
(or E=EFGH25(or 27)C1ea...
SKSPSN 1ea...
HPS16N 1ea...
A)(or E=EV VA)
BGK485R 1ea...
WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Gold
A) EV VA) ( ), 30mm (17)
voo ceable tdesiread Hoods can be used anhrTidden HPS H
NSA16 (or 17)
he Tn. y handle desigeads on aner thry time it is ead Hoods can be used an
.tt lefder list aorder all piec: Or A KITOTNTHIS IS
wn in the es shoder all piec
o 28mmDia = up t6 5 Lngth = 2.5 in
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2ea...
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm (order I.D. No Letter
be selecusing siz
C is a shorBGKSR
ujits in Fomponencosion prrorotally ct
ylon ce/naphitr100% gherT. of the hoodt anoot aeel fthe r
n of the HPS allounique desigvoo ceable tdesir
od blanks under 1/2-inch in butt diametor red only fty ct can be used in an. Itse 16 SK2 seausing siz
or ligher SK2 butt cap suitable ftC is a shor
.s line’’s lineujit eel seaest rtoof and one of the lighosion pr
t tion makes this seaonstrucylon c. ooteel fept the rco ac t”” tpocket“e is no
e encercumft along the full ciry point anen and hold to tighs it twn of the HPS allo
he Tn. y handle desigeads on aner thr
. ooteel fr i ”” hidden“el is readed BarhrT. ek sleevorc
ead Hood uses a tubed seahrTidden HPS H
lso . Aerod blanks under 1/2-inch in butt diamete but should vtion aboaon�gury c
outs yt laalight and ultror ligh
en on the t in tube when tighching tn with mat desigead Hood uses a tubed sea
REF# RSK07
ANT TTANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EVIMPOR
ANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EV
ailable in Eva
ANT DIMENSIONS FOR BUILDING CUSTOM CORK OR EV
A, BGKSEVVA, BGKSEailable in E
A FOR SK2 CASTIN OR EV VA FOR SK2 CASTING SEA
TS NG SEA ATS
or sizF
(B)1
5mm
Handle length and pr
enon length should be betT
)18mmA((A
STe 16 KSKor siz
ny desigo�le of anHandle length and pr
een 2 and 6 mmwenon length should be bet
Handle length and pr
e 17 KSKor sizF
ny desigo�le of anHandle length and pr
= 20m ”” = 20mm, A““AS dimension Te 17 KSK
= 17”” = 17“B = 20mm,
SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
WCSAWC
BGSK16 or 17RCORDER KIT KSKSS16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...KSKSS16 (or 17)
1 ea...BGSK16 or 17RC (or E=EVA)
1 ea...BGK485RC or BGS65RC
(or E=EVA)
1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP
WCS
NSA16 or 17
NSA16 or 17 (included)
AWC
FGH25C (16)FGH27C (17)
HPS16N or 17
SKSPSN16 or 17SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1 ea...SKSS16/B or 17/B
1 ea...HPS16N or 17N
1 ea...SKSPSN16 or 17
1 ea...FGH25C (16) or 27C (17)cork only
1 ea...BGK485RC or BGS65RC
(or E=EVA)
3 ea...NSA16 or 17
1ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP
WCS
WCS
NSA16 or 17
AWC
FGK25C (16)FGK27C (17)
KDPS16ASH or 17
SKSPSN16 or 17SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1 ea...SKSS16/B or 17/B
1 ea...KDPS16ASH or 17
1 ea...SKSPSN16 or 17
1 ea...FGK25C (16) or 27C (17)cork only
1 ea...BGK485RC or BGS65RC
(E=EVA)
3 ea...NSA16 or 17
1ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
WCS
Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)
Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)
Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)
PAGE 6
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
REF# RSK08
REF# RSK09
REF# RSK10
KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood
OCKING Spinning SSK2: UPL
GE 6AP
OCKING Spinning S
ip Ct / GreaOCKING Spinning S
tionsaon�gurip C
t the end of the st a”” aC“er he lettTTE: NOinding check AWTE: NO
t the end of each st17 aaon�gurwing collohe fT
OCKING Spinning SSK2: UPL
SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP
or BGS65RCBGK485RC 1 ea...
(or E=EVBGSK16 or 17RC 1 ea...
KSKSS16 (or 17)1 ea...
ORDER LIST
ORDER KIT KSKSS16 or 17
es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is a A AWC is ae: Ex: SKSPSN16e siztnao desigock number tt the end of each st
tly aenrtions curombinaw all ctions shoa
OCKING Spinning S
SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP
or BGS65RC
A)(or E=EV
ORDER KIT KSKSS16 or 17
tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G
e: Ex: SKSPSN16. Ateaor the SK2 Spinning Sailable fvtly a
ip Ct / GreaOCKING Spinning S
SK2 SPINNING SPLIT GRIP HIDDEN THREAD NO FOREGRIP
CBGSK16 or 17R
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv
ORDER LIST“ed in the e notts aromponenll c. A
tionsaon�gurip C
or BGS65RBGK485R
ppend 16 or . A”” AORDER LIST
ended) tC (Exor BGS65RC BGK485R
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...
12.5mm I.D.WC12.5B = Bl 16.5mm) EX: A AWC12.5B = Blue with
half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Red,Blue,Silver or CAW1 ea...
A)(or E=EV VA)
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm (order I.D. No Letter
WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Gold Red,Blue,Silver or
NSA16 or 17 (included)
WCS
NSA16 or 17 (included)
CAW
k or Eor, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT
UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL
17) (17)
A.VVA.k or ET include oes NOD. esor both piec
idden ing H, Uplockody
REF# RSK08
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP
A)(or E=EV VA)
BGK485RC 1 ea...
1 ea...
1 ea...
1 ea...
1 ea...
ORDER LISTSKSS16/B or 17/B
HPS16N or 17N
SKSPSN16 or 1
FGH25C (16) or
or B
SKSS16/B or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIPORDER LIST
S
HPS16N or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP
SKSPSN16 or 17
FGH27C (17)FGH25C (16)
CAW
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH NO FOREGRIP
or BGS65RBGK485R
C
REF# RSK08
ended) tC (Exor BGS65RC BGK485R
485 Lngth = 2 in
with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold
blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...
WC12.5B = Blue with 12.5m AW 16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW1ea...
NSA16 or 173 ea...
A)(or E=EV VA)
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments
(order I.D. equal No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
NSA16 or 17
WCS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
CAW
ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
C
t t lefts in the ORDER LIST a
REF# RSK09
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
NSA16 or 173 ea...
A)(E=EV
or BGS65RC BGK485RC 1 ea...
FGK25C (16) or 27C (17)1 ea...
SKSPSN16 or 171 ea...
KDPS16ASH or 171 ea...
SKSS16/B or 17/B1 ea...
ORDER LIST
SKSS16/B or 17S
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
or BGS65RC
cork FGK25C (16) or 27C (17)
ORDER LIST
SKSPSN16 17
KDPS16ASH or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIP
KDPS16ASH or 17FGK27C (17)FGK25C (16)
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH NO FOREGRIPor BGS65RBGK485R
CAW
ended) tC (Exor BGS65RC BGK485R
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold
blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG3ea...
WC12.5B = Blue with 12.5m AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW1ea...
NSA16 or 173 ea...
from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments
(order I.D. equal No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or
NSA16 or 17
ts in the ORDER LIST ader all par: Or A KITOTT NTHIS IS
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood
ed HoodostrKDPS16ASH(or 17) = F
t t lefts in the ORDER LIST a
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood
ed Hood
REF# RSK10
WCSAWC
BGSK1617RCORDER KIT SKSS16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSS16 (or 17)
1 ea...BGSK1617RC (or E=EVA)
1 ea...BGK485RC or BGS65RC
(or E=EVA)
1 ea...NKC16 or 17RC (or E=EVA)
2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP
AWC
WCS
NSA16 or 17
NSA16 or 17 (included)
AWC
FGH25C (16)FGH27C (17)
HPS16N or 17SKSPSN16 or 17
SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1ea...SKSS16/B or 17/B1 ea...HPS16N or 17N1 ea...SKSPSN16 or 171 ea...FGH25C (16) or 27C (17)
1ea...BGK485RC or BGS65RC (or E=EVA)1 ea..NKC16RC or 17RC (or E=EVA)3ea...NSA16 or 172 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP
AWC
NKC16 OR 17
NKC16 OR 17
WCS
NSA16 or 17
AWC
FGK25RC (16)FGK27RC (17)
KDPS16ASH or 17SKSPSN16 or 17
SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1ea...SKSS16/B or 17/B
1 ea...KDPS16ASH or 17
1 ea...SKSPSN16 or 17
1ea...BGK485RC or BGS65RC
(or E=EVA)
1 ea...FGK25RC (16) or 27C (17)
1 ea...NKC16RC OR 17RC
3ea...NSA16 or 17
2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP
AWC
NKC16RC OR 17RC
SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)
Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)
Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)
PAGE 7
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
REF# RSK11
REF# RSK12
REF# RSK13
KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood
aon�gurwing collohe fT
OCKING Spinning SSK2: UPL
vtly aenrtions curombinaw ctions shoa
OCKING Spinning S
ll c. Ateaor the SK2 Spinning Sailable fv
ip Ct / GreaOCKING Spinning S
ORDER LIST“ed in the e notts aromponenll c
tionsaon�gurip C
GE 7APPA
ppend 16 or . A”” ORDER LIST
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP
A)(or E=EV VA)
or BGS65RCBGK485RC 1 ea...
(or E=EVBGSK1617RC 1 ea...
SKSS16 (or 17)1 ea...
ORDER LIST
t the end of the st a”” aC“er he lettTTE: NOinding check AWTE: NO
t the end of each st17 aon�gurwing c
ORDER KIT SKSS16 or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP
or BGS65RC
A) EV VA)
C16 OR 17NK
es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is a AWC is ae: Ex: SKSPSN16e siztnao desigock number tt the end of each st
tly a
ORDER KIT SKSS16 or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP
tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G
e: Ex: SKSPSN16or the SK2 Spinning S
CBGSK1617R
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH “NUBBIN” FOREGRIP
or BGS65RBGK485R
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv
omponen
ended) tC (Exor BGS65RC BGK485R
ppend 16 or
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...
12.5mm I.D.WC12.5B = Blue with 16.5mm) EX: A
half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Red,Blue,Silver or CAW2 ea...
(or E=EVNKC16 or 17RC 1 ea...
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm (order I.D. No Letter
WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Gold Red,Blue,Silver or
A)(or E=EV
o 24mm sz17: 20 up to 23mmDia = sz16: 18 up t
WCS
NSA16 or 17 (included)
o 24mmo 23mm
CAW
or, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT
UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL
C
A.VVA.k or EorT include oes NOD. esor both piec
idden ing H, Uplockodyy, UplockUDES: Spinning B
REF# RSK11
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP
NSA16 or 173ea...(or E=EVNKC16RC or 17RC 1 ea..
A)(or E=EVor BGS65RCBGK485RC 1ea...
FGH25C (16) or 27C (17) 1 ea...SKSPSN16 or 171 ea...HPS16N or 17N1 ea...SKSS16/B or 17/B1ea...
ORDER LIST
SKSS16/B or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP
A)or E=EV VA)
or BGS65RC
FGH25C (16) or 27C (17)
ORDER LISTCAW
C16 OR 17NK
SKSS16/B or 17SKSPSN16 or 17
HPS16N or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIP
HPS16N or 17FGH27C (17)FGH25C (16)
AW
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH “NUBBIN” FOREGRIPor BGS65RBGK485R
C65 Lngth = 2.5 in485 Lngth = 2 in
ended) tC (Exor BGS65RC BGK485R
with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold
blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...
WC12.5B = Blue with 12.5m AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP
from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments
(order I.D. equal No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP
o 24mm sz17: 20 up t p
NSA16 or 17
WCS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP
ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH “NUBBIN” FOREGRIP
t t lefts in the ORDER LIST a
REF# RSK12
o 28mmDia = up t65 Lngth = 2.5 in
NKC16RC OR 17RC1 ea...
FGK25RC (16) or 27 1 ea...
A)(or E=EV A
or BGS65BGK485RC 1ea...
SKSPSN16 or 171 ea...
KDPS16ASH or 171 ea...
SKSS16/B or 17/B1ea...
ORDER LIST
SKSS16/B or 17
T CAW
o 24mm sz17: 20 up to 23mmDia = sz16: 18 up t
CC OR 17RC16RNK
SKSS16/B or 17SKSPSN16 or 17
KDPS16ASH or 17
KDPS16ASH or 17C (17)FGK27RC (16)FGK25R
or BGS65RBGK485R
CAW
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
ended) tC (Exor BGS65RC BGK485R
16.0mm) EX: IGWCS13 -Gold with 13mm I.D. blank in half mm increments from 7.0 to of
(order I.D. equal to diameter WCS16 (or 17) No Letter (silver), S (gold), IG2 ea...
WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...
NSA16 or 173ea...
16.0mm) EX: IGWCS13 -Gold with 13mm I.D. blank in half mm increments from 7.0 to
(order I.D. equal to diameter (black). No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order
NSA16 or 17
ts in the ORDER LIST ader all par: Or A KITOTNTHIS IS
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood
rKDPS16ASH(or 17) = F
t t lefts in the ORDER LIST a
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood
ed Hoodostr
REF# RSK13
WCS AWC
BGSK16RC or 17RCORDER KIT SKSS16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSS16 (or 17)
1 ea...BGSK16 or 17RC
1 ea...BGK485RC or BGS65RC
1 ea...FGS2RC
3 ea...NSA16 or 17
2ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP
AWC
WCS
NSA16 or 17(included)
NSA16 or 17(included)
AWC
FGH25C (16)FGH27C (17)
HPS16N or 17NSKSPSN16 or 17
SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1 ea...SKSS16/B or 17/B
1 ea...HPS16N or 17N
1 ea...SKSPSN16 or 17
1 ea...FGH25C (16) or 27C (17)
1 ea...FGS2RC
1ea...BGK485RC (or E=EVA)
3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP
AWC
FGS2RC
FGS2RC
FGS2RC
WCS
NSA16 or 17(included)
AWC
FGK25RC (16)FGK27RC (17)
KDPS16ASH or 17SKSPSN16 or 17
SKSS16/B or 17
THIS IS NOT A KIT: Order all parts in the ORDER LIST at left
ORDER LIST1 ea...SKSS16/B or 17/B
1 ea...KDPS16ASH or 17N
1 ea...SKSPSN16 or 17
1ea...BGK485RC (or E=EVA)
1 ea...FGK25RC (16) or 27RC (17)
1 ea...FGS2RC
2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
AWC
SK2: UPLOCKING Spinning Seat / Grip Con�gurationsThe following con�gurations show combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC is available in Silver, Red, Blue and Gold; WCS is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
Lgth = 64mm (16), 70mm (17)Dia = 28mm (16), 30mm (17)
Lgth = 51mmDia = 25.5mm
Lgth = 51mmDia = 25.5mm
Lgth = 51mmDia = 25.5mm
KDPS is a tubed hood with matching cork sleeve.Positioned properly it can completely cover threaded barrels on many handle designs.
Lgth = 42mm (16), 45mm (17)Dia = 26mm (16), 28mm (17)
Quoted Lengths are for CORK (EVA) only, not cork and seat components combined.Questions visit our website at Anglersresource.net, email: info@anglersresource.net
Lgth = 57mm (16), 65mm (17)Dia = 27mm (16), 28mm (17)
PAGE 8
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
REF# RSK14
REF# RSK15
REF# RSK16
KDPS16ASH(or 17) = Frosted HoodKDPS16BASH(or 17) = Black HoodKDPS16GBASH (or 17) = Gunsmoke Hood
OCKING Spinning SSK2: UPLGE 8AP
OCKING Spinning S on�gurip Ct / GreaOCKING Spinning S tionsaon�gur
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP
FGS2RC1 ea...
BGK485RC or BGS65RC 1 ea...
BGSK16 or 17RC1 ea...
SKSS16 (or 17)1 ea...
ORDER LIST
t the end of the st a”” aC“er he lettTTE: NOW inding check A AWC is aWTE: NOock number tt the end of each st17 ations shoaon�gurwing collohe fT
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP
BGK485RC or BGS65RC
CFGS2R
es a ctock number indicat the end of the st, Blue and Ged, Rerr, Railable in SilvvWC is ae: Ex: SKSPSN16e siztnao desigock number t
ailable fvtly aenrtions curombinaw ctions sho
ORDER KIT SKSS16 or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP
tical paror iden f“E”” fe , substitutiprk gores a cold and Silv, Gailable in BlackvWCS is aold; , Blue and G
e: Ex: SKSPSN16ll c. Ateaor the SK2 Spinning Sailable f
CC or 17RBGSK16R
SK2 SPINNING SPLIT GRIP HIDDEN THREAD WITH UNIVERSAL FOREGRIP
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par. erold and Silv
ORDER LIST“ed in the e notts aromponenll c
or BGS65RBGK485R
ppend 16 or . A”” ORDER LIST
ended) tC (Exor BGS65RC BGK485R
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm equal to diameter of(order I.D. WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...
12.5mm I.D.WC12.5B = Blu 16.5mm) EX: A W
half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Red,Blue,Silver or CAW2ea...
NSA16 or 173 ea...
FGS2RC1 ea...
IGWCS13 -Gold with 13mm I.D.increments from 7.0 to 16.0mm) EX:
blank in half mm (order I.D. No Letter
WC12.5B = Blue with half mm increments from 6.0 to (order I.D. equal to diameter of blank in
Gold CAW Dia = 25.5mm
Lgth = 51mm
WCS
(included)NSA16 or 17
CAW
k or Eor, speci�ed cWCS winding checksor both piecbors fead Hood and arhrT
UDES: Spinning BT KIT INCLREEL SEA AT KIT INCL
Dia = 26mm (16), 28mm (17)
A.VVA.k or ET include oes NOD. esor both piec
idden ing H, Uplockodyy, UplockUDES: Spinning B
REF# RSK14
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP
A)(or E EV VA)BGK485RC 1ea...
FGS2RC1 ea...
FGH25C (16) or 27C (17)1 ea...
SKSPSN16 or 171 ea...
HPS16N or 17N1 ea...
SKSS16/B or 17/B1 ea...
ORDER LISTSKSS16/B or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIP
FGH25C (16) or 27C (17)
ORDER LIST CAW CFGS2RSKSS16/B or 17
SKSPSN16 or 17HPS16N or 17N
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIPHPS16N or 17N
FGH27C (17)FGH25C (16)
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (HPS) WITH UNIVERSAL FOREGRIPor BGS65RBGK485R
CW
REF# RSK14
ended) tC (Exor BGS65RC BGK485R
65 Lngth = 2.5 in485 Lngth = 2 in
with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold
blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...
WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW3ea...
A)(or E=EV VA)BGK485RC 1ea...
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments
(order I.D. equal No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
(included)NSA16 or 17
WCS
THIS IS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
ts in the ORDER LIST ader all par: Or A KITOT NTHIS IS
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
Dia 28mm (16), 30mm (17) CW
t t lefts in the ORDER LIST a
REF# RSK15
C BGK485R
o 28mmDia = up t65 Lngth = 2.5 in
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
I.D. equal to diameter of blank in half mm Red,Blue,Silver or CAW2 ea...
FGS2RC1 ea...
FGK25RC (16) or 27RC (17)1 ea...
A)(or E=EV VA)BGK485RC 1ea...
SKSPSN16 or 171 ea...
KDPS16ASH or 17N1 ea...
SKSS16/B or 17/B1 ea...
ORDER LISTSKSS16/B or 17
C FGS2RCAW
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or
RC (17)
ORDER LISTSKSS16/B or 17
SKSPSN16 or 17KDPS16ASH or 17
NSA16 or 17
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
WCS
KDPS16ASH or 17C (17)FGK27RC (16)FGK25R
SK2 SPINNING SPLIT GRIP HIDDEN THREAD (KDPS) WITH UNIVERSAL FOREGRIP
KDPS16ASH(or 17) = F
CAW
ed HoodostKDPS16ASH(or 17) = F
ended) tC (Exor BGS65RC BGK485R
o 28mmDia = up t65 Lngth = 2.5 in485 Lngth = 2 in
with 13mm I.D.from 7.0 to 16.0mm) EX: IGWCS13 -Gold
blank in half mm increments to diameter of(order I.D. equal WCS16 (or 17) (black). No Letter (silver), S (gold), IG2 ea...
WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D.16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm
from 7.0 to 16.0mm) EX: IGWCS13 -Gold blank in half mm increments
(order I.D. equal No Letter
WC12.5B = Blue with 12.5mm I.D.16.5mm) EX:
I.D. equal to diameter of blank in half mm
uestions visit our wQengths ared LuotQ
(included)NSA16 or 17
, email: inf.netecesournglersrt Ae aebsituestions visit our wk and seaor, not c) onlyAVVAORK (Eor Ce fengths ar
ts in the ORDER LIST ader all par: Or A KITOTT NTHIS IS
. nsy handle desigels on manrbareaded er thrvoely completly it can coperositioned prP
.ek sleevorching ctKDPS is a tubed hood with ma
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black HoodKDPS16ASH(or 17) = F
.netecesouro@anglersr, email: inf.ombinedts component ck and sea
t t lefts in the ORDER LIST a
eaded
KDPS16GBASH (or 17) = Gunsmoke HoodKDPS16BASH(or 17) = Black Hood
ed HoodostrKDPS16ASH(or 17) = F
REF# RSK16
SK2: DOWNLOCKING Spinning Seat with Graphite Hood/Nut Grip Con�gurationsThe following con�gurations show all combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
WCSWCS AWC
RGK6016RC: size 16RGK6517RC: size 17
RGK6016RC: size 16RGK6517RC: size 17
RGK6016RC: size 16RGK6517RC: size 17
ORDER KIT SKSS16 or 17
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 22.8mm size 17: 19 up to 25.1mm
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nut and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSS16 (or 17)
1 ea...RGSK6016RC or 6517RC (or E=EVA)
1 ea...BGK485RC or BGS65RC (or E=EVA)
2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT NO FOREGRIP
WCSAWC
ORDER KIT SKSS16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nutm and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSS16 (or 17)1 ea...RGSK6016RC or 6517RC (or E=EVA)
1 ea...BGK485RC or BGS65RC (or E=EVA)1 ea...NKC16RC or 17RC (or E=EVA)3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT, “NUBBIN” FOREGRIP
SK2 SPINNING SPLIT GRIP DOWNLOCKING GRAPHITE HOOD/NUT, UNIVERSAL FOREGRIP
AWC
NKC16RC OR 17RC
WCS
AWC
ORDER KIT SKSS16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Downlocking Graphite Hood & Nut and arbors for both pieces. Does NOT include WCS or AWC winding checks, speci�ed cork or EVA.
ORDER LIST1ea...SKSS16 (or 17)
1 ea...RGSK6016RC or 6517RC
(or E=EVA)
1 ea...BGK485RC or BGS65RC
(or E=EVA)
1 ea...FGS2RC (or E=EVA)
3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX:
AWC
FGS2RC
Lgth = 51mmDia = 25.5mm
PAGE 9
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
NSA16 or 17 (included)
NSA16 or 17 (included)
NSA16 or 17 (included)
REF# RSK17
REF# RSK18
REF# RSK19
SK2: DOWNLOCKING Spinning Seat with Traditional Metal Hood Grip Con�gurationsThe following con�gurations show all metal hood combinations currently available for the SK2 Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
WCSWCS AWC
ORDER KIT SKSPSM16 or 17
PAGE 10
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 23mm size 17: 19 up to 25mm
Lgth = size 16: 58mm size 17: 62mmDia = size 16: 19 up to 22.8mm size 17: 19 up to 25.1mm
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
Lgth = 51.2mmDia = sz16: 19 up to 25.4mm
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSPSM16 (or 17)
1 ea...RGK6016RC or RGK6517RC
1 ea...BGK485RC or BGS65RC
2 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
3 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD NO FOREGRIP
WCSAWC
ORDER KIT SKSPSM16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1 ea...SKSPSM16 (or 17)
1 ea...RGK6016RC OR 6517RC
1 ea...BGK485RC or BGS65RC
1 ea...NKC16RC or 17RC
3 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2 ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD, “NUBBIN” FOREGRIP
SK2 SPINNING SPLIT GRIP DOWNLOCKING METAL HOOD, UNIVERSAL FOREGRIP
AWC
NKC16RC OR 17RC
FGS2RC
WCS
AWC
ORDER KIT SKSPSM16 or 17
REEL SEAT KIT INCLUDES: Spinning Body, Uplocking Hidden Thread Hood and arbors for both pieces. Does NOT include WCS winding checks, speci�ed cork or EVA.
ORDER LIST1ea...SKSPSM16 (or 17)
1 ea...RGK6016RC OR 6517RC
1 ea...BGK485RC or BGS65RC
1 ea...FGS2RC
3ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
2ea...IG (gold), S (silver), No Letter (black). WCS16 (or 17) (order I.D. equal to diameter of blank in half mm increments from 7.0 to 16.0mm) EX: IGWCS13 -Gold with 13mm I.D.
AWC
RGK6016RC: size 16RGK6517RC: size 17
RGK6016RC: size 16RGK6517RC: size 17
RGK6016RC: size 16RGK6517RC: size 17
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
485 Lngth = 2 in65 Lngth = 2.5 inDia = up to 28mm
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
NSA16 or 17 (included)
B or 17B GB or 17GB = Gunsmoke
B or 17B GB or 17GB = Gunsmoke
B or 17B GB or 17GB = Gunsmoke
NSA16 or 17 (included)
NSA16 or 17 (included)
REF# RSK20
REF# RSK21
REF# RSK22
VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with Traditional Metal Hood & Solid Grip Con�gurationsThe following con�gurations show all metal hood combinations currently available for the VSS Spinning Seat. All components are noted in the “ORDER LIST”. Append 16 or 17 at the end of each stock number to designate size: Ex: SKSPSN16NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold; WCS (metallized plastic) is available in Black, Gold and Silver. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)
VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood
VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood
VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood
PAGE 11
Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm
ORDER LIST1ea...VSSM(D)16 (or 17)
1 ea...BGV16 or 17C (or E=EVA)
1 ea...FBC2 (16) or RBC1620(16)
or 1720(17)
2 ea...NSA16 or 17
No winding check is available for this particular configuration
ORDER LIST1ea...VSSM(D)16 (or 17)
1 ea...BGV16 or 17C (or E=EVA)
1 ea...FGS2RC (16) or FGS25C (17) not available in EVA
1 ea...FBC2(16) or RBC1620(16) or 1720(17)
2 ea...NSA16 or 17
1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
VSS SOLID GRIP DOWNLOCKING METAL HOOD NO FOREGRIP
AWC
VSS SOLID GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP
VSS SOLID GRIP DOWNLOCKING METAL HOOD WITH “NUBBIN” FOREGRIP
AWC
BGV16C OR 17C
FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork
FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork
FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork
VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)
Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm
BGV16C OR 17CFGS25C (standard, large)FGS2RC (rubberized cork)
Lgth = 51mmDia = 25.5mm
ORDER LIST1ea...VSSM(D)16 (or 17)
1 ea...BGV16 or 17C (or E=EVA)
1 ea...NKC16RC or 17RC
1 ea...FBC2(16) or RBC1620(16) or
1720(17)
2 ea...NSA16 or 17
1 ea...AWC Red,Blue,Silver or Gold (order I.D. equal to diameter of blank in half mm increments from 6.0 to 16.5mm) EX: AWC12.5B = Blue with 12.5mm I.D.
VSSM16 OR 17 (STANDARD)VSSD16 OR 17 (DELUXE)
Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm
BGV16C OR 17C
All of the above con�gurations will accept Fuji’s newgraphite/nylon nut and hood. SOLD SEPARATELY. OrderPart SKSS16 (or 17)/ASH
NKC16RC OR 17RC
Lgth = sz16: 31mm sz17: 31mmDia = sz16: 18 up to 23mm sz17: 20 up to 24mm
NSA16 or 17
NSA16 or 17
NSA16 or 17
REF# RSK23
REF# RSK24
REF# RSK25
VSS Spinning R
ts: DOWNLeaeel SVSS Spinning R
OCKING Spinning Sts: DOWNL
eaOCKING Spinning S
GE 11 APPA
t with ea
t the end of the st a”” aC“er he lettTTE: NOW inding check A AWC (WTE: NO
t the end of each stppend 16 or 17 aAaon�gurwing collohe fT
aditional MrTVSS Spinning R
VSS SOLID GRIP DOWNLOCKING MET
VSSD16 OR 17 (DELVSSM16 OR 17 (ST
es a ctock number indicat the end of the stailable in Silvvluminum) is aed AnodizAWC (
nao desigock number tt the end of each sttions curombinaw all metal hood ctions shoa
etal Hood & Saditional Mts: DOWNLeaeel SVSS Spinning R
A IP DOWNLOCKING MET TAL HOOD NO FOREGRIP
UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND
tical paror iden f“E”” fe , substitutiprk gores a cWCS (metallizold; , Blue and Ged, Rerailable in Silv
e: Ex: SKSPSN16e siztnaVSS Spinning Sor the ailable fvtly aenrtions cur
on�gurip Colid Gretal Hood & SOCKING Spinning Sts: DOWNL
AL HOOD NO FOREGRIP
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par, Gailable in Blackved plastic) is aWCS (metalliz
ed in the e notts aromponenll c. AteaVSS Spinning S
tionsaon�gureaOCKING Spinning S
AL HOOD NO FOREGRIP C2 (� RBC
ubbeBGV16C OR 1
. erold and Silv, G
. ”ORDER LIST“ed in the
t with ea
kored cizRubberor RBC1620 (�ts 16) or 1720 (�ts 17):
wn)A (shoVVA (shoFBC2 (�ts 16): E
p gparticular configurationNo winding check is available for this
NSA16 or 172 ea...
or 1720(17)
FBC2 (16) or RBC1620(16) 1 ea...
(or E=EVBGV16 or 17C 1 ea...
VSSM(D)16 (or 17)1ea...
ORDER LIST
No winding check is available for this
20(1
A) EV A
VSSD16 = SilvVSSD16VSSM16VSSM16NSA16 or 17
e 17 appr size 16 apprDia = siz
e Hoodeluxer DVSSD16 = Silve Hoodeluxold D = GGVSSD16
= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16
x 27mmoe 17 apprx 25mmo 6 appr
REF# RSK23
VSS SOLID GRIP DOWNLOCKING MET
CAW
(or E=EVBGV16 or 17C 1 ea...
VSSM(D)16 (or 17)1ea...
C (rubberFGS2RFGS25C (standar
A IP DOWNLOCKING MET TAL HOOD WITH UNIVERSAL FOREGRIP
A) EV A
VSSD16 OR 17 (DELVSSM16 OR 17 (ST
Dia = 25.5mmLgth = 51mm
k)ored cizC (rubberge), lardFGS25C (standar
AL HOOD WITH UNIVERSAL FOREGRIP
UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND
BGV16C OR 17C
NSA16 or 17
e 17 appr size 16 apprDia = siz
BGV16C OR 17C
C2 (� RBC bbe
RSAL FOREGRIP
x 27mmoe 17 apprx 25mmoe 16 appr
kored cizRubberor RBC1620 (�ts 16) or 1720 (�ts 17):
wn)A (shoVVA (shoFBC2 (�ts 16): E
VSS SOLID GRIP DOWNLOCKING MET
.12.5mm I.DWC12.5B = Blue with 16.5mm) EX: Afrom 6.0 to
equal to diameter of blank in half mm increments Red,Blue,Silver or CAW1 ea...
NSA16 or 172 ea...
FBC2(16) or RBC1620(16) or 1720(17)1 ea...
Aavailable in EVFGS2RC (16) or FGS25C (17) not1 ea...
(or E=EVBGV16 or 17C 1 ea...
A IP DOWNLOCKING MET TAL HOOD WITH “NUBBIN” FOREGRIP
WC12.5B = Blue with equal to diameter of blank in half mm increments
Gold (order I.D. Red,Blue,Silver or
FBC2(16) or RBC1620(16) or 1720(17)
FGS2RC (16) or FGS25C (17) not
A) EV A
VSSD16 = SilvVSSD16VSSM16VSSM16VSSM16 = F
AL HOOD WITH “NUBBIN” FOREGRIP
e Hoodeluxer DVSSD16 = Silve Hoodeluxold D = GGVSSD16
= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16
ed HoodostrVSSM16 = F
AL HOOD WITH “NUBBIN” FOREGRIP
REF# RSK24
VSS SOLID GRIP DOWNLOCKING MET
CAW
VSSM(D)16 (or 17)1ea...
ORDER LIST
C OR 17RC16RNK
A IP DOWNLOCKING MET TAL HOOD WITH “NUBBIN” FOREGRIP
VSSD16 OR 17 (DELVSSM16 OR 17 (ST
o 23mmDia = sz16: 18 up t sz17: 31mmLgth = sz16: 31mm
CC OR 17R
AL HOOD WITH “NUBBIN” FOREGRIP
UXE)VSSD16 OR 17 (DEL)ARDAND (ST TAND
BGV16C OR 17C
NSA16 or 17
iz
e 17 appr size 16 apprDia = siz
BGV16C OR 17C
NSA16 or 17
C2 (�ts RBC16 bber
N” FOREGRIP
kored cor RBC1620 (�ts 16) or 1720 (�ts 17):
wn)A (shoVVA (shoFBC2 (�ts 16): E
x 27mmoe 17 apprx 25mmo r
WC12.5B = Blue with 12.5mm AAWC12.5B = Blue with 12.5mm I.D16.5mm) EX: increments from 6.0 to
I.D. equal to diameter of blank in half mm Gold (order Red,Blue,Silver or CAW1 ea...
NSA16 or 172 ea...
1720(17)
FBC2(16) or RBC1620(16) or 1 ea...
NKC16RC or 17RC1 ea...
(or E=EVBGV16 or 17C 1 ea...
er DVSSD16 = Silvold D = GGVSSD16
= Black HoodBVSSM16 = Gunsmoke HoodGBVSSM16
ostrVSSM16 = F
.WC12.5B = Blue with 12.5mm I.D16.5mm) EX:
I.D. equal to diameter of blank in half mm Gold (order
FBC2(16) or RBC1620(16) or
A) V VA) o 24mm sz17: 20 up t
e Hoodeluxer De Hoodeluxold D
= Black Hood = Gunsmoke Hood
ed Hoodost
t SKSS16 (or 17)/ASH arPylon nut and hoode/naphitrg
ll of the aboA
NSA16 or 17
(or 17)/ASH . OYY. OrTELLYAATELAR. SOLD SEPon nut and hood
s new’ujiept Fctions will acaon�gure cvll of the abo
NSA16 or 17
der. Ors new
VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with Traditional Metal Hood & Split Grip Con�gurationsThe following con�gurations show split grip con�gurations for VSS reel SeatsNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” or “RC” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
VSSM16 (STANDARD)VSSD16 (DELUXE)
HOOD COLOR LIST FORABOVE CONFIGURATIONS
PAGE 12
Lgth = 3.75-inchesDia = approx 23mm
ORDER LIST1ea...VSSM(D)16
1 ea...FGV16RC or 17RC (or E=EVA)
1 ea...BGK485RC
2 ea...NSA16 or 17
2 ea...AWC (see NOTE above)
1 ea...WCS (see note above)
ORDER LISTADD 1ea...FGS2RC Foregrip and 1 ea AWC winding check to above ORDER LIST
VSS SIZE 16 SPLIT GRIP DOWNLOCKING METAL HOOD NO FOREGRIP
VSS SIZE 16 SPLIT GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP
VSS SIZE 17 SPLIT GRIP DOWNLOCKING METAL HOOD WITH NO FOREGRIP
AWC
VSS SIZE 17 SPLIT GRIP DOWNLOCKING METAL HOOD WITH UNIVERSAL FOREGRIP
FGV16RC
FGV16RC VSSM16 (STANDARD)VSSD16 (DELUXE)
Lgth = 3.75-inchesDia = approx 23mm
Lgth = 51mmDia = 25.5mm
Lgth = 51mmDia = 25.5mm
ORDER LIST1ea...VSSM(D)17
1 ea...BGV17RC (or E=EVA)
1 ea...BGS65RC
2 ea...AWC (see NOTE above)
2 ea...NSA17
VSSM17 (STANDARD)VSSD17 (DELUXE) Lgth = 4.25-inches
Dia = approx 27mm
Lgth = 2.5-inchesDia = approx 28mm
FGV17RC
(See available hood colors below)
(See available hood colors below)
(See available hood colors below)
(See available hood colors below)
All of the above con�gurations will accept Fuji’sgraphite/nylon nut and hood. SOLD SEPARATELY. Order Part SKSS16 (or 17)/ASH
All of the above con�gurations will accept Fuji’s new“Nubbin’” Foregrip. Order in size 16 or 17.
NK16RC OR 17RC
BGK485RC
BGK485RC
Lgth = 2 inDia = approx 28mm
Lgth = 2 inDia = approx 28mm
AWC
AWC
AWC
FGS2RC
VSSM17 (STANDARD)VSSD17 (DELUXE)
Lgth = 4.25-inchesDia = approx 27mm
Lgth = 2.5-inchesDia = approx 28mm
FGV17RC
AWC
AWC FGS2RC
ORDER LISTADD 1ea...FGS2RC Foregrip and 1 ea AWC winding check to above ORDER LIST
BGS65RC
BGS65RC
NSA16
NSA16
NSA17
NSA17
REF# RSK26
REF# RSK27
REF# RSK28
REF# RSK29
VSSM16 = Frosted HoodVSSM16GB = Gunsmoke HoodVSSM16B = Black HoodVSSD16G = Gold Deluxe HoodVSSD16 = Silver Deluxe Hood
WCS
VSS Spinning Reel Seats: DOWNLOCKING Spinning Seat with HIDDEN THREADS. Solid & Split GripThe following con�gurations show hidden thread con�gurations for VSS reel SeatsNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
VSSM16 (STANDARD)VSSD16 (DELUXE)
PAGE 13
ORDER LIST1ea...VSSM(D)16 or 17
1 ea...KDPS16 or 17 (+hood color)
1 ea...FGK25RC (16) or 27RC (17)
1 ea...BGV16 or 17
2 ea...NSA16 or 17
1 ea...FBC2(16) or RBC1620(16) or
1720(17)
ORDER LIST1ea...VSSM(D)16 or 17
1 ea...KDPS16 or 17 (+hood color)
1 ea...FGK25RC (16) or 27RC (17)
1 ea...FGV16RC or 17RC
1 ea...BGK485RC (16) OR
BGS65RC (17)
2 ea...NSA16 or 17
2 ea...AWC of proper size
ORDER LIST1ea...VSSM(D)16 or 17
1 ea...HPS16 or 17
1 ea...FGH25C (16) or 27C (17)
1 ea...BGV16 or 17
2 ea...NSA16 or 17
1 ea...FBC2(16) or RBC1620(16) or
1720(17)
ORDER LIST1ea...VSSM(D)16 or 17
1 ea...HPS16 or 17
1 ea...FGH25C (16) or 27C (17)
1 ea...FGV16RC or 17RC
1 ea...BGK485RC (16) OR
BGS65RC (17)
2 ea...NSA16 or 17
2 ea...AWC of proper size
VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD
VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD
VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17
BGV16 OR 17
BGV16 or 17 VSSM16 (STANDARD)VSSD16 (DELUXE)
VSSM17 (STANDARD)VSSD17 (DELUXE)
Lgth = 4.25-inchesDia = approx 27mm
Lgth = 2.5-inchesDia = approx 28mm
FGV16RC or 17RCBGK485RC (for 16)BGS65RC (for 17) (shown)
BGK485RC (for 16)BGS65RC (for 17) (shown)
AWC
VSSM17 (STANDARD)VSSD17 (DELUXE)
Lgth = 4.25-inchesDia = approx 27mm
Lgth = 2.5-inchesDia = approx 28mm
FGV16RC or 17RC
AWC
HPS16 or 17FGH25C (16)FGH27C (17)
FGK25RC (16)FGK27RC (17)
KDPS16 or 17
FGK25RC (16)FGK27RC (17)
KDPS16 or 17
HPS16 or 17FGH25C (16)FGH27C (17)
Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm
Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)
Lgth = 2.5-in (16); 2.75-in (17)Dia = 28mm (16); 30mm (17)
Lgth = 2.5-in (16); 2.75-in (17)Dia = 28mm (16); 30mm (17)
Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)
Lgth = 9-inchesDia = size 16 approx 25mm size 17 approx 27mm
NSA16 or 17
NSA16 or 17
NSA16 or 17
NSA16 or 17
FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork
FBC2 (�ts 16): EVA (shown)or RBC1620 (�ts 16) or 1720 (�ts 17):Rubberized cork
B GBASH (or 17) = Gunsmoke Hood
B GBASH (or 17) = Gunsmoke Hood
REF# RSK30
REF# RSK31
REF# RSK29
REF# RSK32
VSS Spinning R ts: DOWNLeaeel SVSS Spinning R OCKING Spinning Sts: DOWNL eaOCKING Spinning S
GE 13 APPA
t with ea
t the end of the st a”” aC“er he lettTTE: NOailable in Blackvplastic) is a
W inding check A AWC (WTE: NOaon�gurwing collohe fT
THREADS. SHIDDEN VSS Spinning R
VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD
VSSM(D)16 or 171ea...
ORDER LIST
es a ctock number indicat the end of the ster in half mm ID incrold and Silv, Gailable in Black
ailable in Silvvluminum) is aed AnodizAWC (tions faon�guread cw hidden thrtions shoa
olid & Split GrTHREADS. Sts: DOWNLeaeel SVSS Spinning R
VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOODC (16)FGK25R )ARDANDVSSM16 (ST TAND
tical paror iden f“E”” fe , substitutiprk gores a co 16.0mm. om 7.0 tts fremener in half mm ID incr
old in half mm ID incr, Blue and Ged, Rerailable in Silvtseaeel SVSS ror tions f
ipolid & Split GrOCKING Spinning Sts: DOWNL
VSS SOLID GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par
o 16.5mm; om 6.0 tts fremenold in half mm ID incr
eaOCKING Spinning S
AL HOOD RBC162 C2 (�ts
ed WCS (metallizo 16.5mm;
t with ea
or RBC1620 (�ts 16) or 1720 (�ts 17):wn)A (shoVVA (shoFBC2 (�ts 16): E
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD
1720(17)
FBC2(16) or RBC1620(16) or 1 ea...
NSA16 or 172 ea...
BGV16 or 171 ea...
FGK25RC (16) or 27RC (17)1 ea...
KDPS16 or 17 (+hood color)1 ea...
VSSM(D)16 or 17
FGH25C (16)
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD
FBC2(16) or RBC1620(16) or
FGK25RC (16) or 27RC (17)
KDPS16 or 17 (+hood color)
HPS16 or 17FGH25C (16)
(16); 28mm (17)
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD
UXE)VSSD16 (DEL)ARDANDVSSM16 (ST TAND
NSA16 or 17
B
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOODBGV16 or 17
x 27mmoe 17 appr siz
NSA16 or 17
ASH (or 17) = Gunsmoke HoodGB
VSS SOLID GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD
REF# RSK30
ASH (or 17) = Gunsmoke Hood
1720(17)
FBC2(16) or RBC1620(16) or 1 ea...
NSA16 or 172 ea...
BGV16 or 171 ea...
FGH25C (16) or 27C (17)1 ea...
HPS16 or 17 1 ea...
VSSM(D)16 or 171ea...
ORDER LIST
FGH27C (17)
FBC2(16) or RBC1620(16) or
FGH25C (16) or 27C (17)
FGH27C (17)
Dia = 28mm (16); 30mm (17)
UXE)VSSD16 (DEL
NSA16 or 17SA16 or 17
ed cizubberr RBC162 BC2 (�ts
REF# RSK31kored c
or RBC1620 (�ts 16) or 1720 (�ts 17):wn)A (shoVVA (shoFBC2 (�ts 16): E
VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17
BGS65RC (17)
BGK485RC (16) OR1 ea...
FGV16RC or 17RC1 ea...
FGK25RC (16) or 27RC (17)1 ea...
KDPS16 or 17 (+hood color)1 ea...
VSSM(D)16 or 171ea...
ORDER LIST
VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17
FGK25RC (16) or 27RC (17)
KDPS16 or 17 (+hood color)
KDPS16 or 17C (17)FGK27RC (16)FGK25R
Dia = 26mm (16); 28mm (17)
VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17
UXE)VSSD17 (DELARDANDVSSM17 (ST TAND
KDPS16 or 17
VSS SPLIT GRIP “KDPS” HIDDEN THREAD WITH TRADITIONAL HOOD 16 OR 17)ARD
CC or 17RFGV16R
pp
wn)or 17) (shoC (fBGS65Ror 16)C (fBGK485R
VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17
VSSM(D)16 or 171ea...
ORDER LIST
WC of proper sizeA2 ea...
NSA16 or 172 ea...
FGH27C (17)FGH25C (16)
VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17
HPS16 or 17FGH27C (17)FGH25C (16)
VSS SPLIT GRIP HPS “HIDDEN” THREAD HOOD 16 OR 17
UXE)VSSD17 (DEL)ARDANDVSSM17 (ST TAND
NSA16 or 17
B
BGS65RBGK485R
CC or 17RFGV16R
NSA16 or 17
ASH (or 17) = Gunsmoke HoodGB
wn)or 17) (shoC (fBGS65Ror 16)C (fBGK485R
REF# RSK29
ASH (or 17) = Gunsmoke Hood
WC of proper sizeA2 ea...
NSA16 or 172 ea...
BGS65RC (17)
BGK485RC (16) OR1 ea...
FGV16RC or 17RC1 ea...
FGH25C (16) or 27C (17)1 ea...
HPS16 or 17 1 ea...
VSSM(D)16 or 171ea...
FGH25C (16) or 27C (17)
Dia = 28mm (16); 30mm (17) Dia = a
NSA16 or 17
x 27mmo appr CAW
NSA16 or 17
x 28mmoDia = appr
REF# RSK32
NPS Spinning Reel Seats: UPLOCKING Low Pro�le Spinning NPS is a low pro�le seat that is primarilty an uplocking seat due to the narrow fore grip portion. We suggest a thread or epoxy ramp or ciustom winding check for these seats. Available in sizes 16, 18 and 20NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
DNPSM16, 18 OR 20 (STANDARD)DNPSSD16, 18 OR 20 (DELUXE)
DNPSM16 (STANDARD)DNPSSD16 (DELUXE)
DNPSM16GB B
KDPS16ASH = Frosted Hood GB B = Black Hood
PAGE 14
ORDER LIST1ea...DNPSM (orDNPSSD) size
16, 18 or 20
1 ea...FGS2RC
1 ea...BGK485RC or BGS65RC
2 ea...NSA16 18 or 20
ORDER LIST1ea...DNPSM (orDNPSSD) size 16
1 ea...KDPS16ASH
1 ea...FGK25RC (16)
1 ea...BGK485RC
2 ea...NSA16
1 ea...AWC
ORDER LIST1ea...DNPSM (orDNPSSD) size 16
1 ea...KSKSS16ASH
1 ea...BGKS16RC (16)
1 ea...BGK485RC
2 ea...NSA16
1 ea...AWC
ORDER LIST1ea...DNPSM (orDNPSSD) size 16
1 ea...HPS16
1 ea...FGH25RC (16)
1 ea...BGK485RC
2 ea...NSA16
1 ea...AWC
NPS SPLIT GRIP WITH TRADITIONAL METAL HOOD SIZE 16, 18 OR 20
NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONLY
NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONLY
NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONLY
FGS2RC
Lgth = 2.5-inchesDia = approx 28mm
BGK485RC
AWC
Lgth = 2.5-inchesDia = approx 28mmAWC
HPS16
Lgth = 2-inches Dia = 25.5mm
BGK485RC
BGK485RC
Use BGS65RC for size 20
AWC
AWC
Lgth = 48.6mmDia = approx 28mm
Lgth = 2 inchesDia = approx 28mm
FGK25RC (16)KDPS16ASH
DNPSM16 (STANDARD)DNPSSD16 (DELUXE)
DNPSM16 (STANDARD)DNPSSD16 (DELUXE)
BGK485RCBGKS16RC
FGH25RC
KSKSS16ASH
Lgth = 2.25-in (16); 2.5-in (17)Dia = 26mm (16); 28mm (17)
BGS65RC: Lgth = 2.5-inchesDia = approx 28mm
Lgth = 1.65 in (16), 1.75in (17)Dia = 26mm (16), 28mm (17)
Lgth = 2.5-in (16)Dia = 28mm (16)
NSA16, 18 or 20
NSA16
NSA16
NSA16
REF# RSK33
REF# RSK34
REF# RSK35
REF# RSK36
GE 14 AP
NPS Spinning R ts: UPLeaeel SNPS Spinning R OCKING Lts: UPL o�le Spinning rw Po o�le Spinning
t the end of the st a”” aC“er he lettTTE: NOailable in Blackvplastic) is a
inding check AWTE: NOailable in sizv. A vtsor these seaf
t thao�le seaw prNPS is a lo
NPS Spinning R
NPS SPLIT GRIP WITH TRADITIONAL MET
DNPSM (orDNPSSD) size1ea...
ORDER LISTDNPSSD16, 18 OR 20 (DELDNPSM16, 18 OR 20 (ST
es a ctock number indicat the end of the ster in half mm ID incrold and Silv, Gailable in Black
ailable in Silvvluminum) is aed AnodizAWC ( AWC (es 16, 18 and 20ailable in siz
t due ting seay an uplockiltimart is prt tha
ts: UPLeaeel SNPS Spinning R
NPS SPLIT GRIP WITH TRADITIONAL MET
DNPSM (orDNPSSD) sizeUXE) DEL
)ARDAND ST TAND
tical paror iden f“E”” fe , substitutiprk gores a co 16.0mm. om 7.0 tts fremener in half mm ID incr
old in half mm ID incr, Blue and Ged, Rerr, Railable in Silv
Wtion. ip porre gorw foro the nart due t
OCKING Lts: UPL
AL HOOD SIZE 16, 1 MET TAL HOOD SIZE 16, 18 OR 20
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par
o 16.5mm; om 6.0 tts fremenold in half mm ID incr
amp or ciusty rxead or epoe suggest a thr
o�le Spinning rw Po
AL HOOD SIZE 16, 18 OR 20C FGS2R se BGS65RU
BGK485R
ed WCS (metallizo 16.5mm;
om winding check amp or ciust
o�le Spinning
e 20or sizC fse BGS65RCBGK485R
REF# RSK33
NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL
ORDER LIST
NSA16 18 or 202 ea...
BGK485RC or BGS65RC1 ea...
FGS2RC1 ea...
16, 18 or 20
DNPSM (orDNPSSD) size
GBDNPSM16
NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL
BGK485RC or BGS65RC
B
NPS SPLIT GRIP WITH KDPS HIDDEN THREAD HOOD, SIZE 16 ONL
NSA16, 18 or 20
Y 6 ONL LY
CAWDia = 25.5mmLgth = 2-inches
C (16)FGK25R C BGK485R
x 28mmoDia = apprLgth = 48.6mm
REF# RSK34
CAW1 ea...
NSA162 ea...
BGK485RC1 ea...
FGK25RC (16)1 ea...
KDPS16ASH1 ea...
DNPSM (orDNPSSD) size 161ea...
ORDER LIST
ed Hood ostrKDPS16ASH = F
DNPSSD16 (DELDNPSM16 (ST
DNPSM (orDNPSSD) size 16
GB
UXE)DNPSSD16 (DEL)ARDAND16 (ST TAND KDPS16ASH
Dia = 26mm (16); 28mm (17)Lgth = 2.25-in (16); 2.5-in (17)
NSA16
= Black HoodB
CAW
C (16)FGK25R
Dia = 26mm (16); 28mm (17)Lgth = 2.25-in (16); 2.5-in (17)
C BGK485R
x 28mmoDia = apprLgth = 2 inches
x 28mmoDia = apprC: Lgth = 2.5-inchesBGS65R
NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL
CAW1 ea...
NSA162 ea...
BGK485RC1 ea...
BGKS16RC (16) 1 ea...
KSKSS16ASH1 ea...
DNPSM (orDNPSSD) size 161ea...
ORDER LIST
NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL
DNPSM (orDNPSSD) size 16DNPSM16 (ST
NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONL
)ARDAND16 (ST TAND KSKSS16ASH
NPS SPLIT GRIP WITH KSKSS16ASH HIDDEN THREAD GRAPHITE HOOD, SIZE 16 ONLCBGKS16R
Y L LYCBGK485R
NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL
FGH25RC (16) 1 ea...
HPS161 ea...
DNPSM (orDNPSSD) size 161ea...
ORDER LIST
NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL
DNPSM (orDNPSSD) size 16DNPSSD16 (DELDNPSM16 (ST
NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONLHPS16
UXE)DNPSSD16 (DEL)ARDANDM16 (ST TAND
Dia
NSA16
NPS SPLIT GRIP HPS “HIDDEN” THREAD WITH GRAPHITE/NYLON FULL RADIUS LOCKING HOOD, 16 ONL
CFGH25R
26mm (16), 28mm (17)
Y NG HOOD, 16 ONL LY
CBGK485R
REF# RSK35
CAW1 ea...
NSA162 ea...
BGK485RC1 ea...
FGH25RC (16) 1 ea...
Dia = 28mm (16)Lgth = 2.5-in (16)
NSA16
CAWDia = 28mm (16)Lgth = 2.5-in (16)
x 28mmoDia = apprLgth = 2.5-inches
REF# RSK36
DPS Spinning Reel Seats: DOWNLOCKING Spinning DPS is an extremely versatile, usually downlocking seat, perfect for custom turned handles. Available in sizes 16, 17, 18, 20, 22, 24, and 26. Our cork/EVA selection will not be su�cient for sizes above 20 DPS seats.NOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
DPSM16, 17, 18 or 20 (STANDARD)DPSSD16, 17, 18 or 20 (DELUXE)
DNPSM16 or 17 (STANDARD)DNPSSD16 or 17 (DELUXE)
DPSM16GB B DPSSD16G
DPSM16GB B DPSSD16G
PAGE 15
ORDER LIST1ea...DPSM (or DPSSD) size 16, 18 or 20 / 1 ea...FGS25C / 1 ea...BGD95C / 1 ea...RBC1720 / 1 ea...AWC / 2 ea...NSA16 or 17
ORDER LIST1ea...DPSM (orDPSSD) size 16 or 17 / 1 ea...HPS16 or 17 / 1 ea...FGH25C or 27C / 1 ea...BGD95C / 1 ea...RBC1720 / 2 ea...NSA16 or 17
ORDER LIST1ea...DPSM (or DPSSD) size 16 or 17 / 1 ea...KDPS16 or 17 / 1 ea...FGK25RC or 27RC / 1 ea...BGD95C / 1 ea...RBC1720 / 2 ea...NSA16 or 17
DPSM16GB (with KDPS16GBASH) B (with KDPS16BASH) = Black Hood
DPS GRIP WITH TRADITIONAL METAL HOOD AND UNIVERSAL FOREGRIP, SIZE 16, 17, 18 or 20
DPS GRIP WITH HPS HIDDEN THREAD HOOD AND FOREGRIP, SIZE 16 OR 17
DPS GRIP WITH KDPS HIDDEN THREAD TRADITIONAL METAL HOOD AND FOREGRIP, SIZE 16 or 17
BGD95C (9-inch)
BGD95C (9-inch)
Lgth = 9-inchesDia = 25.5mm (smallest)
Lgth = 9-inchesDia = 25.5mm (smallest)
RBC1720
RBC1720
AWC
HPS16 or 17
FGH25C (16)FGH27C (17)(cork only)
DNPSM16 or 17 (STANDARD)DNPSSD16 or 17 (DELUXE)
BGD95C (9-inch) RBC1720
KDPS16 or 17
FGK25RC (16)FGK27RC (17)(cork only)
FGS25C (for 16 or 18) (cork only)
NSA16, 17, 18 or 20
NSA16 or 17
NSA16 or 17
REF# RSK37
REF# RSK38
REF# RSK39
ACSM Casting Reel Seats: DOWNLOCKING Solid Grip ACSM is an extremely versatile, downlocking casting seat, built for direct blank contact by the angler for added sensitivity. Available in sizes 16 and 17, For proper �t, order the model that matches the diameter of your blank at the point where the reel seat will be positioned. Sizes range from 9.5 mm to 15 mmNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. See catalog for color and size indication. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ACSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION
ACSM (16 or 17 see catalog)
ACSM16GB B = Black Hood
PAGE 16
ORDER LIST1ea...ACSM size 16 or 17
1 ea...BGA9C or 11C
1 ea..RBC1720
Add Universal ForegripFGS25C or withrubberized corkFGS25RC
ACSM SOLID GRIP WITH TRADITIONAL METAL HOOD AND NO FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)
Dia = 25.5mm (smallest)
RBC1720
Requires Custom Winding Check
ACSM16B or 17B
ACSM16GB B = Black Hood
KDPS16/17GBASH BASH = Black Hood
ORDER LIST1ea...ACSM16B or 17B1ea...SKSS16(or 17)/ASH1 ea...BGA9C or 11C1 ea..RBC1720Add Universal ForegripFGS25C or withrubberized corkFGS25RC
ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)
SKSS16 (or 17)/ASH
Dia = 25.5mm (smallest)
RBC1720
Requires Custom Winding Check
ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B
1ea...KSKSS16(or 17)/ASH
1 ea...BGKS16(0r 17)RC
1 ea...BGA9C or 11C
1 ea..RBC1720
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)
KSKSS16(or 17)/ASH
BGKS16(or 17)RC
Dia = 25.5mm (smallest)
RBC1720
ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B
1ea...KDPS16(or 17)
1 ea...BGK25(or 27)RC
1 ea...BGA9C or 11C
1 ea..RBC1720
ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)
KDPS16(or 17)
BGK25RC (size 16)BGK27RC (size 17)
Dia = 25.5mm (smallest)
RBC1720
ACSM16B or 17B ORDER LIST1ea...ACSM16B or 17B
1ea...HPS16(or 17)
1 ea...FGH25(or 27)C
1 ea...BGA9C or 11C
1 ea..RBC1720
ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17BGA9C (9-inch)BGA11C (11-inch)
HPS16(or 17)
FGH25C (size 16)FGH27C (size 17)
Dia = 25.5mm (smallest)
RBC1720
Add Universal Foregrip FGS25C or FGS25RC with rubberized cork
Add Universal Foregrip FGS25C or FGS25RC with rubberized cork
REF# RSK40
REF# RSK41
REF# RSK42
REF# RSK43
REF# RSK44
GE 16 AP
asting RCSM CA
ts: DOWNLeaeel Sasting R
OCKING Sts: DOWNL
ip olid GrOCKING S
S USE NO ARBORS AND MUST BE SIZED TCSM SEA ATTE: ANOt the end of the st a”” aC“er he lettTTE: NO
ailable in Blackvplastic) is ainding check AWTE: NO
del thader the mo, orer �toppremely vtrxCSM is an eA
asting RCSM CA
ACSM SOLID GRIP WITH TRADITIONAL MET
ACSM size 16 or 171ea...
ORDER LIST
O TS USE NO ARBORS AND MUST BE SIZED es a ctock number indicat the end of the st
er in half mm ID incrold and Silv, Gailable in Blackailable in Silvvluminum) is aed AnodizAWC ( AWC (our blank aer of yches the diamettt madel tha
, built fting casting seawnlock, dotileersa
ts: DOWNLeaeel Sasting R
ACSM SOLID GRIP WITH TRADITIONAL MET
FGS25RC with rubberized corkAdd Universal Foregrip FGS25C or
talog)CSM (16 or 17 see caA
TER. PLEASE REFER METHE BLANK DIAO tical paror iden f“E”” fe , substitutiprk gores a c
talog fee cao 16.0mm. Som 7.0 tts fremener in half mm ID incrold in half mm ID incr, Blue and Ged, Rerr, Railable in Silv
t will beel seae the rt wheroint the pour blank ay the angler ft btacont blank cecor dir, built f
OCKING Sts: DOWNL
AL HOOD AND NO L MET TAL HOOD AND NO FOREGRIP 16 or 17
OG FOR SIZING INFORMALTTALAATGE 49 OF OUR CAO PTTER. PLEASE REFER AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par
tion. e indicaolor and sizor ctalog fo 16.5mm; om 6.0 tts fremenold in half mm ID incr
om 9.5 mm tange fres r. Sizositionede pt will bailable in sizv. Ayor added sensitivity the angler f
ip olid GrOCKING S
BGA11C (11-inch) BGA9C (9-inch)
AL HOOD AND NO FOREGRIP 16 or 17
TION AATION OG FOR SIZING INFORM
ed WCS (metallizo 16.5mm; o 15 mmom 9.5 mm t
or Fes 16 and 17, ailable in siz
RBC1720
FGS25RCrubberized corkFGS25C Add Univ
RB1 ea..
BG 1 ea...
ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17
ACSM16B or 17B1ea...
ORDER LIST
ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17SKSS16 (or 17)/ASH
GBCSM16A
CSM16B or 17B A
ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17
= Black HoodB
BGA11C (11-inch) BGA9C (9-inch)
ACSM SOLID GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17
RBC1720
REF# RSK40
FGS25RCrubberized corkFGS25C or withAdd Universal Foregrip
RBC17201 ea..BGA9C or 11C1 ea...SKSS16(or 17)/ASH1ea...ACSM16B or 17B1ea...
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17ORDER LIST
in WeqR
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17KSKSS16(or 17)/ASH
GBCSM16 A
CSM16B or 17B A
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17KSKSS16(or 17)/ASH
FGS25RC with rubberized cork
= Black HoodB
BGA11C (11-inch)
BGA9C (9-inch)
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17
ubberized cork
ACSM SOLID GRIP WITH HIDDEN THREAD GRAPHITE/NYLON HOOD AND FOREGRIP 16 or 17RBC1720
REF# RSK41
RBC17201 ea..
BGA9C or 11C1 ea...
BGKS16(0r 17)RC1 ea...
SKSS16(or 17)/ASH1ea...K
ACSM16B or 17B1ea...
ORDER LIST
ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17ORDER LIST
( )
KSKSS16(or 17)/ASH
ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17KDPS16(or 17)
CSM16B or 17B AKSKSS16(or 17)/ASH
CSM16B or 17B A
ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17
BGA9C (9-inch)
BGA9C (9-inch)
ACSM SOLID GRIP WITH KDPS HOOD AND FOREGRIP 16 or 17
RBC1720
RBC1720
REF# RSK42
RBC17201 ea..
BGA9C or 11C1 ea...
BGK25(or 27)RC1 ea...
16(or 17)KDPS1ea...
ACSM16B or 17B1ea...
ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17ORDER LIST
KDPS16/17
ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17HPS16(or 17)
ASHGB KDPS16/17
CSM16B or 17B A
CSM16B or 17B A
ACSM SOLID GRIP WITH HPS HOOD AND FOREGRIP 16 or 17
= Black HoodASHB
BGA11C (11-inch) BGA9C (9-inch)
BGA11C (11-inch) BGA9C (9-inch)
RBC1720
REF# RSK43
RBC17201 ea..
BGA9C or 11C1 ea...
FGH25(or 27)C1 ea...
16(or 17)HPS1ea...
ACSM16B or 171ea...
e 17)FGH27C (siz
REF# RSK44
WCS (metallized
p
A
L
A
L
B
L
A
L
A
L
ACSM Casting Reel Seats: DOWNLOCKING Split Grip ACSM is an extremely versatile, downlocking casting seat, built for direct blank contact by the angler for added sensitivity. Available in sizes 16 and 17, For proper �t, order the model that matches the diameter of your blank at the point where the reel seat will be positioned. Sizes range from 9.5 mm to 15 mmNOTE: Winding check AWC (Anodized Aluminum) is available in Silver, Red, Blue and Gold in half mm ID increments from 6.0 to 16.5mm; WCS (metallized plastic) is available in Black, Gold and Silver in half mm ID increments from 7.0 to 16.0mm. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION
PAGE 17
ACSM (16 or 17 see catalog)Requires Custom Winding Check
Requires Custom Winding Check
ACSM16GB B = Black Hood
ORDER LIST1ea...ACSM size 16 or 17
1 ea...BGA95RC
1 ea..BGK485RC or
BGKS65RC (extended)
2ea...AWC
ACSM SPLIT GRIP WITH TRADITIONAL METAL HOOD AND NO FOREGRIP 16 or 17BGA95RC
AWC
BGK485RC or BGS65RC (Extended)
Lgth = 2 inchesDia = approx 28mmBG525RC: Lgth = 2.5-inchesDia = approx 28mm
ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17
1ea...SKSS16(or 17)/ASH
1 ea...BGA95RC
1 ea..BGK485RC or
BGKS65RC (extended)
2ea...AWC
ACSM SPLIT GRIP WITH GRAPHITE/NYLON HOOD AND NO FOREGRIP 16 or 17BGA95RC
AWC
BGK485RC or BGS65RC (Extended)
Lgth = 2 inchesDia = approx 28mmBG525RC: Lgth = 2.5-inchesDia = approx 28mm
SKSS16 (or 17)/ASH
ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17
1ea...KSKSS16(or 17)/ASH
1ea...BGKS16(or 17)
1 ea...BGA95RC
1 ea..BGK485RC or
BGKS65RC (extended)
2ea...AWC
ACSM SPLIT GRIP WITH GRAPHITE/NYLON HIDDEN THREAD HOOD 16 or 17BGA95RC
BGKS16(or17) AWC
BGK485RC or BGS65RC (Extended)
Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm
KSKSS16(or 17)/ASH
ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17
1ea...KDPS16(or 17)
1ea...FGK25RC(or 27RC)1 ea...BGA95RC
1 ea..BGK485RC or
BGKS65RC (extended)
2ea...AWC
ACSM SPLIT GRIP WITH HIDDEN THREAD KDPS 16 or 17BGA95RC
AWC
BGK485RC or BGS65RC (Extended)
Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm
KDPS16(or 17)
FGK25RC (size 16)FGK27RC (size 17)
ACSM16B or 17BORDER LIST1ea...ACSM size 16 or 17
1ea...HPS16(or 17)
1ea...FGH25C(or 27C)1 ea...BGA95RC
1 ea..BGK485RC or
BGKS65RC (extended)
2ea...AWC
ACSM SPLIT GRIP WITH HIDDEN THREAD HPS 16 or 17BGA95RC
AWC
BGK485RC or BGS65RC (Extended)
Lgth = 2 inchesDia = approx 28mmBGS65RC: Lgth = 2.5-inchesDia = approx 28mm
HPS16(or 17)
FGH25C (size 16)FGH27C (size 17)
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
REF# RSK45
REF# RSK46
REF# RSK47
REF# RSK48
REF# RSK49
KDPS16/17GBASH BASH = Black Hood
TCSM (TCSSD Deluxe) Reel Seats: DOWNLOCKING Solid Grip CastingTCSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)
TCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)
G GB B = Black Hood
PAGE 18
ORDER LIST1ea...TCSM (or TCSSD) size 16,17,18
1 ea...BGA9C or 11C
1 ea...RBC1720
2 ea...NSA16, 17 or 18
ORDER LIST1ea...TCSM (or TCSSD) size 16,17
1 ea...BGA9C or 11C
1 ea...RBC1720
1 ea...SKSS16(OR 17)/ASH
2 ea...NSA16, 17
ORDER LIST1ea...TCSM (or TCSSD) size 16,17,18
1 ea...BGA9C or 11C
1 ea...RBC1720
1 ea...FGS25C or FGS2RC
2 ea...NSA16, 17 or 18
1 ea...AWC G GB B = Black Hood
KDPS16ASH = Frosted Hood GBASH BASH = Black Hood
TCSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP
TCSM SEAT GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP
TCSM SEAT WITH UNIVERSAL FOREGRIP
BGA9C (9-inch) orBGA11C (11-inch)
BGA9C (9-inch) orBGA11C (11-inch)
Dia = 25.5mm (smallest)Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check.
Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check. Dia = 25.5mm (smallest)
RBC1720
RBC1720
SKSS16(OR 17)/ASH
TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
ORDER LIST1ea...TCSM (or TCSSD) size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...KSKSS16 or 17/ASH1 ea...BGKS16 or 17C2 ea...NSA16, 17
TCSM SEAT WITH HIDDEN THREAD KSKSS/ASH FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
KSKSS16(OR 17)/ASHBGKS16(OR 17)C
ORDER LIST1ea...TCSM (or TCSSD) size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...KDPS16(OR 17)ASH1 ea...FGK25 or 27C2 ea...NSA16, 17
TCSM SEAT WITH HIDDEN THREAD KDPS FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
KDPS16(OR 17)ASH
FGK25C (SIZE 16)FGK27C (SIZE 17)
ORDER LIST1ea...TCSM (or TCSSD) size 16,17
1 ea...BGA9C or 11C
1 ea...RBC1720
1 ea...HPS16(OR 17)N
1 ea...FGH25 or 27C
2 ea...NSA16, 17
TCSM SEAT WITH HIDDEN THREAD HPS FOREGRIPTCSM16, 17(STANDARD)TCSSD16, 17(DELUXE)
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
HPS16(OR 17)N
FGH25C (SIZE 16)FGH27C (SIZE 17)
NSA16, 17 or 18
NSA16 or 17
NSA16, 17 or 18
NSA16 or 17
NSA16 or 17
NSA16 or 17
REF# RSK50
REF# RSK51
REF# RSK52
REF# RSK53
REF# RSK54
REF# RSK55
AWC
GE 18 AP
CSSD DTCSM (T eel Se) ReluxCSSD D OCKING Sts: DOWNLeaeel S ip Colid GrOCKING S astingip Ct the end of the st a”” aC“er he lettTTE: NOo�leCSM is an smooth prTTCSM is an smooth pr
CSSD DTCSM (T
T WIT TCSM SEA AT WITH TRADITIONAL MET
NSA16, 17 or 182 ea...
RBC17201 ea...
BGA9C or 11C1 ea...
size 16,17,18TCSM (or TCSSD) 1ea...
ORDER LISTUXE)CSSD16, 17, 18 (DELTTCSSD16, 17, 18 (DEL
ANDCSM16, 17, 18 (ST TANDTTCSM16, 17, 18 (ST
es a ctock number indicat the end of the stailable in sizv, ating casting seawnlock, doo�le
eel Se) ReluxCSSD D
A TH TRADITIONAL MET TAL HOOD AND SOLID GRIP
18 size 16 Siz
UXE))ARDAND
tical paror iden f“E”” fe , substitutiprk gores a ct choicellenrcxn ees 16, 17, 18. Aailable in siz
OCKING Sts: DOWNLeaeel S
AL HOOD AND SOLID GRIPNSA16, 17 or 18
AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical paroy Pvy and Heavedium Heaor Me ft choic
ip Colid GrOCKING S
, NO FOREGRIP RIP P, NO FOREGRIP
BGA11C (11-inch) BGA9C (9-inch) orNSA16, 17 or 18
. odser casting rwo
astingip C
RBC1720
REF# RSK50
( i 16 17
T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIPTCSM SEA
NSA16, 172 ea...
SKSS16(OR 17)/ASH1 ea...
RBC17201 ea...
BGA9C or 11C1 ea...
size 16,17TCSM (or TCSSD) ...1ea
ORDER LIST
NSA16, 17 or 182 ea...
G
CSSD16, 17(DTTCSSD16, 17(DELCSM16, 17(STTCSM16, 17(ST
T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP
SKSS16(OR 17)/ASH
OR 17)/ASHSKSS16(
ee 18 rsize 16 an Siz
e 18 siz
GB
UXE)CSSD16, 17(DEL)ARDAND T TAND
T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP
= Black HoodB
T GRAPHITE/NYLON NUT AND HOOD, NO FOREGRIP
BGA11C (11-inch) BGA9C (9-inch) orNSA16 or 17
= Black Hood
RBC1720
REF# RSK51
T WIT TCSM SEA AT WITH UNIVERSAL FOREGRIP
CAW1 ea...
NSA16, 17 or 182 ea...
FGS25C or FGS2RC1 ea...
RBC17201 ea...
BGA9C or 11C1 ea...
size 16,17,18TCSM (or TCSSD) 1ea...
ORDER LIST
NSA16, 172 ea...
T WITH UNIVERSAL FOREGRIP
FGS25C or FGS2RC
CSSD16, 17, TTCSSD16, 17, 18 (DELCSM16, 17, 1 TTCSM16, 17, 18 (STCAW
T WITH UNIVERSAL FOREGRIP
G
UXE)CSSD16, 17, 18 (DEL)ARDAND 18 (ST TAND
GB
BGA11C (11-inch) BGA9C (9-inch) or
= Black HoodB
RBC1720
REF# RSK52
( size 16 17
T WIT TCSM SEA AT WITH HIDDEN THREAD KSKSS/ASH FOREGRIP
NSA16, 172 ea...BGKS16 or 17C1 ea...KSKSS16 or 17/ASH1 ea...RBC17201 ea...BGA9C or 11C1 ea...
size 16,17TCSM (or TCSSD) ea...1
ORDER LIST
T WIT TCSM SEA AT WITH HIDDEN THREAD KDPS FOREGRIP
CSSD16, 17(DTTCSSD16, 17(DELCSM16, 17(STTCSM16, 17(ST
T WITH HIDDEN THREAD KSKSS/ASH FOREGRIP
KSKSS16 or 17/ASH
T WITH HIDDEN THREAD KDPS FOREGRIP
OR 17)CBGKS16(
UXE)CSSD16, 17(DEL)ARDAND T TAND
T WITH HIDDEN THREAD KSKSS/ASH FOREGRIP
T WITH HIDDEN THREAD KDPS FOREGRIP
BGA11C (11-inch) BGA9C (9-inch) or
RBC1720
REF# RSK54
REF# RSK53
TCSM (or T size 16 17
T WIT TCSM SEA AT WITH HIDDEN THREAD KDPS FOREGRIP
NSA16, 172 ea...FGK25 or 27C1 ea...KDPS16(OR 17)ASH1 ea...RBC17201 ea...BGA9C or 11C1 ea...
size 16,17TCSM (or TCSSD) ea...1
ORDER LIST
T WIT TCSM SEA AT WITH HIDDEN THREAD HPS FOREGRIP
ostrKDPS16ASH = F
T WITH HIDDEN THREAD KDPS FOREGRIP
KDPS16(OR 17)ASH
T WITH HIDDEN THREAD HPS FOREGRIP
FGK27C (SIZE 17)FGK25C (SIZE 16)
ASHGBed Hood ost
T WITH HIDDEN THREAD KDPS FOREGRIP
UXE)CSSD16 17(DELT)ARDANDCSM16, 17(ST TANDT
T WITH HIDDEN THREAD HPS FOREGRIP
= Black HoodASHB
BGA9C (9-inch) or
BGA9C (9-inch) or
= Black Hood
RBC1720
REF# RSK55
REF# RSK54
NSA16, 172 ea...
FGH25 or 27C1 ea...
HPS16(OR 17)N1 ea...
RBC17201 ea...
BGA9C or 11C1 ea...
size 16,17TCSM (or TCSSD) 1ea...
ORDER LISTFGH27C (SIZE 17)FGH25C (SIZE 16)
HPS16(
UXE)CSSD16 17(DELT)ARDANDCSM16, 17(ST TANDT
OR 17)N(
BGA11C (11-inch) BGA9C (9-inch) or RBC1720
B
S
B
B
B
T
TCSM (TCSSD Deluxe) Reel Seats: DOWNLOCKING Split Grip CastingTCSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)
TCSM16/B, 17/B (STANDARD)TCSSD16/B, 17/B, (DELUXE)
G GB B
G GB B
PAGE 19
ORDER LIST
1 ea...TCSM (or TCSSD) size 16,17,181 ea...BGA95RC1 ea...BGK485RC or 65RC1 ea...BGK485RC or 652 ea...NSA16, 17, 18 2 ea...AWC
ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...SKSS16 OR 17/ASH1 ea...BGA95RC1 ea....BGK485RC or 65RC2 ea...NSA16, 172 ea...AWC1 ea...WCS
ORDER LIST1 ea...TCSM (or TCSSD) size 16,17,181 ea...BGA95RC1 ea....BGK485RC or 65RC3 ea...AWC1 ea...FGS25C OR FGS2RC2 ea...NSA16, 17, 18
ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B
1 ea...KSKSS16 OR 17/ASH
1 ea...BGKS16RC OR 17RC
1 ea...BGA95RC
1 ea....BGK485RC or 65RC
2 ea...AWC
ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...KDPS16 OR 17ASH1 ea...FGK25RC OR 27RC1 ea...BGA95RC1 ea....BGK485RC or 652 ea...AWC2 ea...NSA16 or 17
ORDER LIST1 ea...TCSM (or TCSSD) size 16/B,17/B1 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA95RC1 ea....BGK485RC or 65RC2 ea...AWC2 ea...NSA16 or 17
KDPS16ASH = Frosted Hood GBASH BASH = Black Hood
TCSM SEAT WITH TRADITIONAL METAL HOOD AND SPLIT GRIP, NO FOREGRIP
TCSM SEAT GRAPHITE/NYLON NUT AND HOOD, SPLIT GRIP NO FOREGRIP. 16, 17 ONLY
TCSM SEAT WITH SPLIT GRIP AND UNIVERSAL FOREGRIP
BGA95RC
BGA95RC
Size 16 and 17 will accept WCS winding check,size 18 requires custom winding check.
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS65RC (Extended)
SKSS16(OR 17)/ASH
BGA95RC
BGK485RC or BGS655RC (Extended)
BGA95RC
BGK485RC or BGS65RC (Extended)
BGA95RC BGK485RC or BGS65RC (Extended)
BGA95RC BGK485RC or BGS65RC (Extended)
TCSM16, 17, 18 (STANDARD)TCSSD16, 17, 18 (DELUXE)
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP. 16, 17 ONLY TCSM16/B, 17/B(STANDARD)TCSSD16/B, 17/B(DELUXE)
KSKSS16(OR 17)/ASHBGKS16(OR 17)RC
TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KDPS FOREGRIP. 16, 17 ONLY TCSM16/B, 17/B (STANDARD)TCSSD16/B, 17/B (DELUXE)
KDPS16(OR 17)ASH
FGK25RC (SIZE 16)FGK27RC (SIZE 17)
TCSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND HPS FOREGRIP.16, 17 ONLYTCSM16/B, 17/B, (STANDARD)TCSSD16/B, 17/B, (DELUXE)
HPS16(OR 17)N
FGH25C (SIZE 16)FGH27C (SIZE 17)
AWC
AWC
AWC
AWC
AWC
NSA16, 17, 18
NSA16, 17
NSA16, 17, 18
NSA16, 17
NSA16, 17
NSA16, 17, 18
REF# RSK56
REF# RSK57
REF# RSK59
REF# RSK60
REF# RSK61
REF# RSK58
WCS
AWC
ECSM Reel Seats: BLANK EXPOSED DOWNLOCKING Solid Grip CastingECSM is an smooth pro�le, downlocking casting seat, available in sizes 16, 17, 18. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION
ECSM16 OR 17 (see catalog)
ECSM16 OR 17 (see catalog)
ECSM16GB B = Black Hood
ECSM16GB B = Black Hood
PAGE 20
ORDER LIST1 ea...ECSM size 16,171 ea...BGA9C or 11C1 ea...RBC17201 ea...WCS 16 or 17
ORDER LIST1 ea...ECSM16 OR 171 ea...SKSS16 OR 17/ASH1 ea...BGA9C or 11C1 ea...RBC17201 ea...WCS 16 or 17
ORDER LIST1 ea...ECSM16 OR 17
1 ea...BGA9C or 11C
1 ea...FGS25C OR FGS2RC
1 ea...RBC17201 ea...AWC
ORDER LIST1 ea...ECSM16 OR 17
1 ea...KSKSS16 OR 17/ASH
1 ea...BGKS16RC OR 17RC
1 ea...BGA95RC
1 ea...RBC1720
ORDER LIST1 ea...ECSM16 OR 17 1 ea...KDPS16 OR 17ASH1 ea...FGK25C OR 27C1 ea...BGA9C or 11C1 ea...RBC1720
ORDER LIST1 ea...ECSM16 OR 171 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA9C or 11C1 ea...RBC1720
KDPS16ASH = Frosted Hood GBASH BASH = Black Hood
ECSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP
ECSM SEAT GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP
ECSM SEAT WITH SOLID GRIP AND UNIVERSAL FOREGRIP
Size 16 and 17 will accept WCS winding check,
Size 16 and 17 willaccept WCS windingcheck,
SKSS16(OR 17)/ASH
ECSM16 OR 17 (see catalog)
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP ECSM16 OR 17(see catalog)
KSKSS16(OR 17)/ASHBGKS16(OR 17)RC
ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KDPS FOREGRIPECSM16 OR 17(see catalog)
KDPS16(OR 17)ASH
FGK25C (SIZE 16)FGK27C (SIZE 17)
ECSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND HPS FOREGRIPECSM16 OR 17 (see catalog)
HPS16(OR 17)N
FGH25C (SIZE 16)FGH27C (SIZE 17)
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
BGA9C (9-inch) orBGA11C (11-inch)
RBC1720
REF# RSK62
REF# RSK63
REF# RSK64
REF# RSK65
REF# RSK66
REF# RSK67
AWC
GE 20 AP
ECSM is an smooth preel SECSM R
ailable in sizting casting seawnlock, doo�lets: BLANK EXPOSED DOWNLeaeel S
t choicellenres 16, 17, 18. Aailable in sizOCKING Sts: BLANK EXPOSED DOWNL
y Py and Heaedium Heaor Me ft choicip Colid GrOCKING S
dasting
ti d i ip C
S USE NO ARBORS AND MUST BE SIZED TTE: ECSM SEA ATNOt the end of the st a”” aC“er he lettTTE: NOo�leECSM is an smooth pr
T WIT ECSM SEA AT WITH TRADITIONAL MET
WCS 16 or 171 ea...RBC17201 ea...BGA9C or 11C1 ea...
size 16,17ECSM 1 ea...
ORDER LIST
ECSM16 OR 17 (see ca
O TS USE NO ARBORS AND MUST BE SIZED es a ctock number indicat the end of the st
ailable in sizv, ating casting seawnlock, doo�le
A TH TRADITIONAL MET TAL HOOD AND SOLID GRIP
e Siz
talog)ECSM16 OR 17 (see ca
TER. PLEASE REFER METHE BLANK DIAO tical paror iden f“E”” fe , substitutiprk gores a ct choicellenrcxn ees 16, 17, 18. Aailable in siz
AL HOOD AND SOLID GRIP
OG FOR SIZING INFORMALTTALAATGE 49 OF OUR CAO PTTO PTER. PLEASE REFER AVVAA. Ex: BGK485E = EVVA. Ex: BGK485E = Et in Etical par
oy Pvy and Heavedium Heaor Me ft choic
, NO FOREGRIP RIP P, NO FOREGRIP
BGA11C (11-inch) BGA9C (9-inch) or
TION AATION OG FOR SIZING INFORM
. odser casting rwo
RBC1720
T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIPECSM SEA
WCS 16 or 171 ea...RBC17201 ea...BGA9C or 11C1 ea...SKSS16 OR 17/ASH1 ea...
16 OR 17ECSM1 ea...ORDER LIST
checkept WCS cac
e 16 and 17 willSiz
ECSM16
ECSM16 OR 17
T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP
SKSS16 OR 17/ASH
,checkept WCS 16 and 1
GB ECSM16
talog)(see ca
T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP
= Black HoodB
T GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIPBGA9C (9-inch) or
RBC1720
REF# RSK63
REF# RSK62
T WIT ECSM SEA AT WITH SOLID GRIP AND UNIVERSAL FOREGRIP
CAW1 ea...RBC17201 ea...
FGS25C OR FGS2RC1 ea...
BGA9C or 11C1 ea...
ECSM16 OR 171 ea...ORDER LIST
AW
ECSM16
T WITH SOLID GRIP AND UNIVERSAL FOREGRIP
C
ECSM16 OR 17
kored cizC with rubberFGS2R
C AW
GBECSM16
T WITH SOLID GRIP AND UNIVERSAL FOREGRIPtalog)(see caECSM16 OR 17
= Black HoodB
BGA11C (11-inch) BGA9C (9-inch) or
RBC1720
REF# RSK64
REF# RSK63
RBC17201 ea...
BGA95RC1 ea...
BGKS16RC OR 17RC 1 ea...
KSKSS16 OR 17/ASH1 ea...
ECSM16 OR 171 ea...ORDER LIST
T WIT ECSM SEA AT WITH SOLID GRIP
T WIT ECSM SEA AT WITH SOLID GRIP
BGKS16RC OR 17RC
KSKSS16 OR 17/ASH
, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND KSKSS/ASH FOREGRIP ECSM16 OR 17
HIDDEN TH SOLID GRIP P
COR 17)RBGKS16( KSKSS16
, HIDDEN THREAD AND KSKSS/ASH FOREGRIP talog)(see caECSM16 OR 17
, HIDDEN THREAD AND KDPS FOREGRIP
OR 17)/ASH6(
, HIDDEN THREAD AND KSKSS/ASH FOREGRIP
, HIDDEN THREAD AND KDPS FOREGRIP
BGA11C (11-inch) BGA9C (9-inch) or
RBC1720
REF# RSK65
RBC17201 ea...BGA9C or 11C1 ea...FGK25C OR 27C1 ea...KDPS16 OR 17ASH1 ea...ECSM16 OR 171 ea...
ORDER LIST
T WIT ECSM SEA AT WITH SOLID GRIP
T WIT ECSM SEA AT WITH SOLID GRIP
ostrKDPS16ASH = F
, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND KDPS FOREGRIPECSM16 OR 17
)
, HIDDEN TH SOLID GRIP P, HIDDEN THREAD AND HPS FOREGRIP
FGK27C (SIZE 17)FGK25C (SIZE 16)
GBASHed Hood t
, HIDDEN THREAD AND KDPS FOREGRIPtalog)(see caECSM16 OR 17
, HIDDEN THREAD AND HPS FOREGRIP
= Black HoodASHB
, HIDDEN THREAD AND KDPS FOREGRIP
, HIDDEN THREAD AND HPS FOREGRIP
BGA9C (9-inch) or
od
RBC1720
REF# RSK66
RBC17201 ea...BGA9C or 11C1 ea...FGH25C OR 27C1 ea...HPS16 OR 17N1 ea...ECSM16 OR 171 ea...
ORDER LIST
ECSM16 OR 17 FGH27C (SIZE 17)FGH25C (SIZE 16)
talog)(see caECSM16 OR 17
BGA11C (11-inch) BGA9C (9-inch) or
REF# RSK67
RBC1720
ECSM Reel Seats: BLANK EXPOSED DOWNLOCKING Split Grip CastingECSM is an smooth pro�le, blank exposed, downlocking casting seat, available in sizes 16 or 17. An excellenrt choice for Medium Heavy and Heavy Power casting rods. NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVANOTE: ECSM SEATS USE NO ARBORS AND MUST BE SIZED TO THE BLANK DIAMETER. PLEASE REFER TO PAGE 49 OF OUR CATALOG FOR SIZING INFORMATION
ECSM16 OR 17
ECSM16 OR 17
ECSM16 OR 17
ECSM16 OR 17
ECSM16 OR 17
ECSM16 OR 17
ECSM16GB B = Black Hood
ECSM16GB B = Black Hood
PAGE 21
ORDER LIST1ea...ECSM16 OR 17
1 ea...BGA95RC
1 ea...BGK485RC or BGS65RC 2 ea...AWC
1 ea...WCS 16 or 17
ORDER LIST1ea...ECSM16 OR 171 ea...SKSS16 OR 17/ASH1 ea...BGA95RC1 ea....BGK485RC or BGS65RC2 ea...AWC1 ea...WCS 16 or 17
ORDER LIST1ea...ECSM16 OR 17
1 ea...BGA95RC
1 ea..BGK485RC or BGS65RC
2 ea...AWC
1 ea...FGS25C OR 2RC
ORDER LIST1ea...ECSM16 OR 17
1 ea...KSKSS16 OR 17/ASH
1 ea...BGKS16RC OR 17RC
1 ea...BGA95RC
1 ea....BGK485RC or BGS65RC
2 ea...AWC
ORDER LIST1ea...ECSM16 OR 17
1 ea...KDPS16 OR 17ASH1 ea...FGK25RC OR 27RC1 ea...BGA95RC
1 ea....BGK485RC or BGS65RC2 ea...AWC
ORDER LIST1ea...ECSM16 OR 17
1 ea...HPS16 OR 17N1 ea...FGH25C OR 27C1 ea...BGA95RC
1 ea...BGK485RC or BGS65RC2 ea...AWC
KDPS16ASH = Frosted Hood GBASH BASH = Black Hood
ECSM SEAT WITH TRADITIONAL METAL HOOD AND SPLIT GRIP, NO FOREGRIP
ECSM SEAT GRAPHITE/NYLON NUT AND HOOD, SPLIT GRIP NO FOREGRIP
ECSM SEAT WITH SPLIT GRIP AND UNIVERSAL FOREGRIP
BGA95RC
BGA95RC
BGK485RC or BGS65RC (Extended)
BGK485RC or BGS6RC (Extended)
SKSS16(OR 17)/ASH
BGA95RC
BGK485RC or BGS65RC (Extended)
BGA95RC
BGK485RC or BGS65RC (Extended)
BGA95RC
BGK485RC or BGS65RC (Extended)
BGA95RC
BGK485RC or BGS65RC (Extended)
Add Universal Foregrip FGS25C or FGS2RC with rubberized cork
ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KSKSS/ASH FOREGRIP Z
KSKSS16(OR 17)/ASHBGKS16(OR 17)C
ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND KDPS FOREGRIP
KDPS16(OR 17)ASH
FGK25RC (SIZE 16)FGK27RC (SIZE 17)
ECSM SEAT WITH SPLIT GRIP, HIDDEN THREAD AND HPS FOREGRIP
HPS16(OR 17)N
FGH25C (SIZE 16)FGH27C (SIZE 17)
AWC WCS16 or 17
WCS16 or 17
AWC
AWC
AWC
AWC
AWC
AWC
REF# RSK68
REF# RSK67
REF# RSK69
REF# RSK70
REF# RSK71
REF# RSK72
IPSM (IPSSD Deluxe) Reel Seats: DOWNLOCKING Solid Grip SpinningIPSM is a stylish, downlocking spinning seat, available in sizes 16 only. An excellenrt choice for Light to Medium Light spinning rods. Can be adapted with optional trigger to a casting rod (Part IPS16/TR) NOTE: The letter “C” at the end of the stock number indicates a cork grip, substitute “E” for identical part in EVA. Ex: BGK485E = EVA
IPSM16
WCS (see catalog for sizing info)
IPSM16/B
IPSM16
AWC
IPSM16/B
IPSM16/B
IPSM16/B
IPSM16GB B = Black Hood
IPSM16GB B = Black Hood
PAGE 22
ORDER LIST1ea...IPSM(or IPSSD)16
1 ea...BGS8514C
1 ea...ERC23
2 ea...NSA16 1 ea...WCS 16
ORDER LIST1ea...IPSM(or IPSSD)16/B
1 ea...BGS8514C (spin)
1 ea...ERC23
2 ea...NSA16 1 ea...WCS 16
ORDER LIST1ea...IPSM(or IPSSD)16
1 ea...BGS8514C (spin)
1 ea...ERC23
2 ea...NSA16
1 ea...AWC 16
ORDER LIST1ea...IPSM(or IPSSD)16/B1 ea...BGS8514C 1 ea...ERC231 ea...KDPS16ASH1 ea...FGK25RC2 ea...NSA161 ea...ERC23
ORDER LIST1ea...IPSM(or IPSSD)16/B1 ea...BGS8514C (spin1 ea...ERC231 ea...HPS16N1 ea...FGH25C2 ea...NSA16For casting: BGC8514C & IPS16/TR
ORDER LIST
1ea...IPSM16/B1 ea...BGS25C
Plus Parts to complete
IPSM SEAT WITH TRADITIONAL METAL HOOD AND SOLID GRIP, NO FOREGRIP, SIZE 16
IPSM SEAT GRAPHITE/NYLON NUT AND HOOD, SOLID GRIP NO FOREGRIP, SIZE 16
IPSM SEAT WITH SOLID GRIP AND UNIVERSAL FOREGRIP
SKSS16/ASH
Add Universal Foregrip FGS25C or FGS25RC with rubberized cork
IPSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND KDPS FOREGRIP
KDPS16ASH
KDPS16ASH or any con�guration above
FGK25RC
IPSM SEAT WITH SOLID GRIP, HIDDEN THREAD AND HPS FOREGRIP
HPS16N
FGH25C
FGH25RC or required cork
IPSM SEAT WITH ADAPTER CORK
BGS8514C ERC23
BGS8514C ERC23
BGS8514C ERC23
BGS8514C ERC23
BGS8514C ERC23
BGS25C BGA25RCor Custom Cork
NSA16
NSA16
NSA16
NSA16
NSA16
BGK485RC or BGK525RC (Extended)or Custom Cork
REF# RSK73
REF# RSK74
REF# RSK75
REF# RSK76
REF# RSK77
REF# RSK78
WCS
Anglers Resource:
website: www.anglersresource.net
Facebook:
www.facebook.com/anglersresource
Newsletter subscription:
http://anglersresource.net/Subscri-
betotheGuide.aspx
Technical questions:
jising@anglersresource.net
Other questions:
info@anglersresource.net
Request a product catalog:
1-251-943-4491
Self Mailing Info
400 E Section Ave
Foley al 36535