Virio 05 - Schenck worldwide · 2014. 12. 8. · Vertical Balancing Machine for rotors up to 500 g....

transcript

Virio 05Vertical Balancing Machine for rotors up to 500 g

• Precise unbalance measurement alsofor small, light rotors

• Balancing in one or two planes

• No time-consuming calibration runsthrough permanent calibration

• Compact machine design, small spacerequirement and simple assembly

• PC measuring unit with extensiveoperator prompting and direct displayof unbalance or correction weight

Working principleManually load rotor in the balancing unit, center the work-piece with an interface adapter and close the protectiveshroud

Start the automatic measuring run. Accelerate, measure anddisplay the unbalance on the measuring unit, automaticallyindex to the correction position. The measured value displayis retained after each measuring run.

Open the protective shroud, unload and, if necessary, correctthe unbalance.

Check the result of correction (achievement of tolerance isdisplayed by the measuring unit) and unload the rotor fromthe balancing unit.Measuring unitsCAB 700 is a compact basic instrument for all standardbalancing tasks: Simple, menu-driven operation, clear display and highaccuracy allow perfect balancing of rotors by lessexperienced operators.

Measuring unit CAB 920 as a high end solution - with regardto operation and versatility, as well as accuracy

Range of application Measurement and correction of unbalance in rotors withouttheir own shaft, in one or two planes. Typical examples of

rotors are blank CDs, small blowers without self-propulsion,centrifuges, deflection pulleys, clutch components androtating paint spray nozzles. A shorter spindle distance andprotective shroud provide faster, safer and more accuratebalancing.Design

• Force-measuring, vertical balancing machine withpermanent calibration and automatic operation

• Designed for table-top placement, suitable for a seatedoperator

• Balancing unit, measuring unit and control cabinet aremounted on a common base plate.

• The dynamometer-mounted precision balancing spindlesupports a removable adapter for centering the rotors andis driven by a flange-mounted electric motor.

• The protective enclosure designed according to ISO21940-23 is part of the standard equipment.

• Measuring unit CAB 820 with coloured, graphics capableLCD-Display. Cache memory for 99 rotor data andextensive basic configuration for the different correctionmethods.Optional: CAB 920 with Windows operating system, TFTcolour display with touchscreen function and vector viewof the unbalance. Designed as network compatible

Schenck RoTec GmbHLandwehrstrasse 55D-64293 Darmstadt

Telefon (0 61 51) 32 23 11Telefax (0 61 51) 32 23 15

http://www.schenck-rotec.deE-Mail rotec@schenck.net

embedded PC with memory card and permanent storage ofthe measured unbalance values. Simplest menunavigation in „Easy Mode“.

Telefon (0 61 51) 32 23 11Telefax (0 61 51) 32 23 15

Plan view (non-binding example)WxDxH&

Telefon (0 61 51) 32 23 11Telefax (0 61 51) 32 23 15

Technical data at a glance Virio 05

Weight [kg] 0,5

Diameter, max [mm] 220

Height, max [mm] 150

Machine

Width A [mm] 602

Depth B [mm] 785

Height C [mm] 925

Balancing speed [min -1] 1000 - 3000

Measuring uncertainty [gmm] 0,05 - 0,075

Drive power [kW] 0,1

Power 240 V, 50 Hz

Sound Pressure Level (with class C protection) [LpA [dB(A)]]

Telefon (0 61 51) 32 23 11Telefax (0 61 51) 32 23 15

Virio 05 - Schenck worldwide · 2014. 12. 8. · Vertical Balancing Machine for rotors up to 500 g....

Documents