WIRE MESH PANEL

transcript

WIRE MESH PANELS

POLYSTYRENE

INDUSTRIES

LIMITED

The basic element of the PIL building system is a

modular non prefabricated panel, made up of two

electro-welded steel wire meshes, linked each other by

connectors, sandwiching a polystyrene foam slab

suitably shaped.

Produced on an industrial scale the panel is then

assembled and cast-in-place using shotcrete.

PIL others a complete range of building elements: load

bearing walls, floors, roofing, stairs, partitions and

curtain walls.

Therefore buildings can be entirely constructed with the

same building system, optimizing different supply and

timing phases as well as work force availability.

Polystyrene I. Ltd

(Polystyrene I. Ltd

Polystyrene I. Ltd

w w w . P o l y i n d u s t r i e s . c o m . n g

PIL PANELS

2 Plot 416, Idu Industrial Layout, Phase 1, Abuja, Nigeria | Tel: +234 9 2916411 | Email: info@polyindustries.com.ng | Website: www.polyindustries.com.ng

The cases are easily created by melting the polystyrene behind the metal mesh using a hot air gun or any other similar device

The placement of service pipes (electricity water, gas, etc. …), is carried

out quickly and easily, behind the wire mesh.

Benefit of PIL System

• Speed

• Versatility

• Energy Efficient

• Insulation

• Fire Resistance

• Strength

The PIL panel remarkable lightness allows easy and quick transport and handling.

The PIL panels can be manually positioned and linked together by a nail gun or conventional construction wire.

EASY HANDLING

Note: Skilled workers are not required to carry out these functions.

Spraying of the coating layer on the panel using the plaster sprayer.

Single panel for floor and roofing.

Poly Wire Mesh Panels: A complete range for residential,

industrial and commercial buildings

• With this PIL system,

Pillars/ columns and

lintels are not required.

• It makes building easy

and saves on time,

skilled workmanship and

materials like wood for

formwork and reinforce-

• Once all the panels are

erected all you need is

concrete, sprayed on

both sides to build a

house with load bearing

walls.

Plot 416, Idu Industrial Layout, Phase 1, Abuja, Nigeria | Tel: +234 9 2916411 | Email: info@polyindustries.com.ng | Website: www.polyindustries.com.ng

HEAD OFFICE/FACTORY:

ABUJA OFFICE:

PLOT 416 IDU INDUSTRIAL AREA

PHASE 1, ABUJA F.C.T. NIGERIA.

TEL; +234 09- 2916411, 09-2916412

07010612764, 07010612765, 08034040090 E-MAIL: inquiries@polyindustries.com.ng

WEBSITE: www.polyindustries.com.ng

LAGOS CONTACT: Call:+234 08033076518

WIRE MESH PANEL

Documents