WIRELESSTHERMOSTAT

WIRELESS

FEATURES

THERMOSTAT WIRELESSTHERMOSTAT

INTENDED USE AND PRINCIPLE OF OPERATION

It will automatically turn on/off heating devices or cooling devices as your preset target temperature,to maintain a stable room temperature in order toprovide comfort and save energy.

SPECIFICA TION

Transmitter,Remote thermostat control:CURRENT temp. range: 0.0 ℃~70 ℃ or 32.0 °F~158.0 °FTARGET temp. range: 0.0 ℃~70 ℃ or 32.0 °F~158 .0 °FCURRENT Temperature resolution: ±1℃ / ℉Batteries: 2PCS*1.5V AAA batteryLow temperature: ≤0.0 ℃, CURRENT Shows LL High temperature: ≥70.0 ℉,CURRENT Shows HH Wall mounted holder & Table stand

Receiver, Plug in sock et :Transmission Frequency: 433.92MHzMaximum Rang e: 20 met er s in o pen ar e aMaximum Rating:EU type: 230V/16A/50Hz, 3680W Max.UK type: 250V/13A/50Hz,3250W Max.USA type: 110V/15A/60Hz, 1800W Max.

Remote control Transmitter

Plug Receiver

LED indicator

Switch status

Current temp

Battery statusHeat/Cool mode

temp. unit

temp. unitTarget temp

- / + button

-/ON +/OFF

Status indicator

Rating lable

Plug

Plug and play type,no need installationHeating Mode or Cooling Mode switchableLCD with green backlightDisplay Current temperatureDisplay Target temperatureAutomatic learn code/Manually learn codeC/ F switchableHigh/Low temperature warningEasy setting with memory functionLow battery warningRoom thermostatRF 433Mhz RF technologyMulti-channels,one remote controls multi plugsPortable design,hold in hand/Stand on table/wall mounted

RemoteThermostat

EU Socket UK Socket US Socket

The Wireless Thermostat is intended for automaticcontrol of electrical heating appliances or coolingappliances and consists of 2 components: a RemoteControl Unit with intergrated temperature sensor and a plug in socket unit.

WIRELESSTHERMOSTAT

WIRELESSTHERMOSTAT

WIRELESSTHERMOSTAT

Pairing process

WIRELESSTHERMOSTAT

Step1: Plug the socket into outlet. the LED indicatorwill be blinking, means the socket is in pairing mode,which will last 30 seconds.

WIRELESSTHERMOSTAT

Step2: Place the remote controller nearby the socket,which will constantly talk to the socket, the LED indicator on socket will stop flashing in seconds, pairing successful.

W IRELESSTH ERM OSTAT

* Ensure the remote control is close to the socket during the pairing process without any blockage between the socket and remote.

System setting

-/ON +/ OFF

Place 2xAA battery into the remote controller, the display will shows the system setting

-/ON +/ OFF

the HEAT/COOL icon

flashes, press -/+ together

to select desired mode, Press

-/+ together to confirm or

wait 10 seconds, it will confirm

and proceed to next setting

the temp system icon flashes,

press -/+ button together to select

desired temp system press -/+

together to confirm or wait 10

seconds,it will confirm and proceed

to operation interface.

-/ON +/ OFF

Operating interface

Manual Mode

-/ON +/ OFF

Press -/+ buttons

together for 3 seconds,

enter manual mode,

target temp will vanish

Cl ear in

manual mode

-/ON +/ OFF

Press

to change

the status of switch

-/+ buttons

together

Manual ly turn

on/off the switch

Thermostat setting

-/ON +/ OFF

Press the - or + to change

the target temp.

-/ON +/ OFF

Set the target temp to 25

Celsius degree under cool mode

-/ON +/ OFF -/ON +/ OFF

the temp will automatically adjust temp to be ±1℃target

in our case, the cooler devicewill be turned on above 26℃ and turned off below 24℃(vise versa in )heat mode

Reset the system

in operating interface, press

and hold -/+together for 5

seconds to reset the system

-/ON +/ OFF

System reboot.Go to system

setting section and program

your settings.

Battery replacement

2 x AAA battery

Please replace the battery when the icon shows on display, be sure to replace with same type AAA.fresh

-/ON +/ OFF

MADE IN CHINA

How to use