Post on 01-Dec-2014
description
transcript
W2tools-1 EUR 15/9/11 12:41 Page 1
2
Welcome to the second edition of our Workshop Booklet for 2011,which runs from October '11 to 29th February '12.
Shown in the area below are some of our new lines introduced this year, many of which are requests from our stockists.Look out for the ‘NEW” logo next to the relevant products.
Major Sponsorships
For 2011 we are delighted to announce that United Autosports Race Team have named us ‘Prime Sponsor - Tooling’ fortheir team. United Autosports race in the FIA GT3 Championship across Europe. Additionally, Joe Osborne one of UnitedAutosports’ top drivers, who competes in the FIA GT3 European Championships is being personally sponsored byDraper Tools.
Vehicle technicians from United Autosports have chosen tools from Draper because of their quality and reliability, makingthem the right choice for extreme environments.
One of Draper Tools other sponsorships is at the Santa Pod Raceway in Northamptonshire UK. Here the management atSanta Pod have chosen Draper to be the ‘Official Tool Supplier of Choice at Santa Pod Raceway’. Staff ‘at the Pod’ useDraper tools to maintain their own show vehicles and the day-to-day running of the venue.
More information about the Draper/United Autosports/Santa Pod partnershipsand other Draper sponsorships can be found throughout this booklet.
Just some of the great new lines in this issue...
Tool TrolleysNew ways to move your tools around the workshop.Check them out on page 82.
Two new Draper Black BoxesUpgraded contractors tool boxes to keep your toolssafe! Look on page 82 for full details.
W2tools-1 EUR 9/9/11 12:15 Page 2
*Typical Selling Price - may vary in-store. Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd. Draper Expert Multi-Drive® is a registered trademark of Draper Tools Ltd. 3
B37M/ZIP
37 PIECE 1/4" Sq. Dr. METRICSOCKET AND SOCKET BIT SET IN ZIPCASE• Expert Quality• 9 Draper Expert HI-TORQ sockets with knurled ring for
extra grip• 21 assorted socket bits• 7 accessories
B26M/MC
26 PIECE 1/4" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality• 20 Draper Expert HI-TORQ 6 point sockets with knurled
ring for extra grip• 6 accessories
Stock No.43675EX. VAT INC VAT
List Price €74.18 List Price €89.76
*TSP €37.98 *TSP €45.95
B28MN
28 PIECE 1/4" SQ. DR. METRICCOMBINED SOCKET SET WITH PALMRATCHET• Expert Quality• 6 Draper Expert HI-TORQ metric sockets• 3 accessories• 2 bit holders and 17 bits
B40AMN
40 PIECE 1/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 21 Draper Expert HI-TORQ MM/AF sockets• 7 accessories• Bit holder and 11 bits
B75AMN
75 PIECE 1/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 37 Draper Expert HI-TORQ MM/AF sockets• 9 accessories• Bit holder and 28 bits
Stock No.02350EX. VAT INC VAT
List Price €109.18 List Price €132.10
*TSP €51.78 *TSP €62.65
B47MDSN
47 PIECE 1/4" Sq. Dr. METRIC12 POINT DRAPER EXPERTMULTI-DRIVE® SOCKET SET• Expert Quality• 13 Draper Expert Multi-Drive® sockets• Sockets are multi-drive, which allows them to be used
with hexagon, bi-hexagon (metric and AF) and DraperTX-STAR fixings
• 11 accessories• Bit holder
and 22 bits
Stock No.02351EX. VAT INC VAT
List Price €71.47 List Price €86.48
*TSP €34.75 *TSP €42.05
Stock No.43638EX. VAT INC VAT
List Price €85.30 List Price €103.21
*TSP €45.45 *TSP €54.99
Stock No.02349EX. VAT INC VAT
List Price €69.55 List Price €84.16
*TSP €28.75 *TSP €34.79
Stock No.02368EX. VAT INC VAT
List Price €32.81 List Price €39.70
*TSP €17.35 *TSP €20.99
super tough socket sets for professional workshopsTo ensure durability in even the most demandingenvironments, all these socket sets are manufactured fromhardened and tempered chrome vanadium steel. To protectagainst corrosion, each set is chrome plated with a satin and/orpolished finish.
Blow-mould, soft zip or metal...These high quality socket sets are supplied in either soft zip, blow-mould or metal cases. All our newblow-mould case socket sets feature ABS plastic catches with a ‘secure-close’ design to ensure the casesremain closed in storage or transit (see picture right).
W2tools-1 EUR 9/9/11 12:15 Page 3
4
D25M/MC
25 PIECE 3/8" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality• 17 Draper Expert HI-TORQ 6 point sockets• 2 Draper Expert HI-TORQ 6 point spark plug sockets• 6 accessories
D33MN
33 PIECE 3/8" Sq. Dr. METRICSOCKET SET• Expert Quality• 15 Draper Expert HI-TORQ metric sockets• 11 Draper Expert HI-TORQ metric deep sockets• 2 Draper Expert HI-TORQ spark plug sockets 10 and
14mm• 5 accessories
D35M/ZIPN
35 PIECE 3/8" Sq. Dr. MM/AFSOCKET SET IN ZIP CASE• Expert Quality• 27 Draper Expert HI-TORQ 12 point sockets with
knurled ring for extra grip• Spark plug socket 10mm• 7 accessories
D39AM/MC
39 PIECE 3/8" Sq. Dr. MM/AFCOMBINED SOCKET SET IN METALCASE• Expert Quality• 30 Draper Expert HI-TORQ MM/AF sockets• 3 Draper Expert HI-TORQ spark plug sockets• 6 accessories
D40AMN
40 PIECE 3/8" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 25 Draper Expert HI-TORQ metric sockets• 4 Draper Expert HI-TORQ metric deep sockets• 3 Draper Expert HI-TORQ spark plug sockets• 8 accessories• Chrome vanadium steel hardened, tempered and
chrome plated for corrosion protection
D42MDSN
42 PIECE 3/8" Sq. Dr. METRIC12 POINT DRAPER EXPERTMULTI-DRIVE® SOCKET SET• Expert Quality• 26 Draper Expert Multi-Drive® sockets• 2 Draper Expert HI-TORQ spark plug sockets 10 and
14mm• Sockets are multi-drive, which allows them to be used
with hexagon, bi-hexagon (metric and AF) and DraperTX-STAR fixings
• 6 accessories• Bit holder
and 8 bits
Stock No.43646EX. VAT INC VAT
List Price €110.62 List Price €133.85
*TSP €51.53 *TSP €62.35
Stock No.43592EX. VAT INC VAT
List Price €153.46 List Price €185.68
*TSP €73.95 *TSP €89.48
Stock No.02353EX. VAT INC VAT
List Price €127.75 List Price €154.58
*TSP €54.96 *TSP €66.50
Stock No.02354EX. VAT INC VAT
List Price €132.70 List Price €160.56
*TSP €65.95 *TSP €79.80
Stock No.02352EX. VAT INC VAT
List Price €99.55 List Price €120.46
*TSP €47.25 *TSP €57.17
Stock No.02366EX. VAT INC VAT
List Price €102.70 List Price €124.26
*TSP €50.95 *TSP €61.65
3/8" sq. dr.expert quality
socket sets
W2tools-1 EUR 9/9/11 12:15 Page 4
*Typical Selling Price - may vary in-store. Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd. Draper Expert Multi-Drive® is a registered trademark of Draper Tools Ltd. 5
H30MN
30 PIECE 1/2" Sq. Dr. METRICSOCKET SET• Expert Quality• 23 Draper Expert HI-TORQ metric sockets• 3 Draper Expert HI-TORQ spark plug sockets• 4 accessories
H31M/ZIP
31 PIECE 1/2" Sq. Dr. METRICSOCKET SET IN ZIP CASE• Expert Quality• 23 Draper Expert HI-TORQ sockets• 3 Draper Expert HI-TORQ spark plug sockets 10-14mm• 5 accessories• Packed in handy zip carrying case with web strap
handles and quality foam insert
H31M/MC
31 PIECE 1/2" Sq. Dr. METRICSOCKET SET IN METAL CASE• Expert Quality• 23 Draper Expert HI-TORQ MM/AF sockets• 3 Draper Expert HI-TORQ spark plug sockets• 5 accessories
H37AMN
37 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 29 metric Draper Expert HI-TORQ MM/AF sockets• 3 Draper Expert HI-TORQ spark plug sockets• 5 accessories
H41AMN
41 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 32 Draper Expert HI-TORQ MM/AF sockets• 3 Draper Expert HI-TORQ spark plug sockets 10-14mm• 6 accessories
H61AMN
61 PIECE 1/2" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 36 Draper Expert HI-TORQ MM/AF sockets• 15 Draper Expert HI-TORQ MM/AF
deep sockets• 3 Draper Expert HI-TORQ spark plug
sockets 10-14mm• 7 accessories
Stock No.02357EX. VAT INC VAT
List Price €135.19 List Price €163.58
*TSP €60.00 *TSP €72.60
Stock No.43637EX. VAT INC VAT
List Price €150.72 List Price €182.37
*TSP €77.27 *TSP €93.50
Stock No.43647EX. VAT INC VAT
List Price €159.02 List Price €192.42
*TSP €87.50 *TSP €105.88
Stock No.02358EX. VAT INC VAT
List Price €182.21 List Price €220.47
*TSP €83.95 *TSP €101.58
Stock No.02360EX. VAT INC VAT
List Price €263.38 List Price €318.68
*TSP €114.01 *TSP €137.95
Stock No.02359EX. VAT INC VAT
List Price €171.22 List Price €207.17
*TSP €69.01 *TSP €83.50
1/2" sq. dr.
expert qualitysocket sets
W2tools-1 EUR 9/9/11 12:15 Page 5
6
T26AMN
26 PIECE 3/4" Sq. Dr. MM/AFCOMBINED SOCKET SET• Expert Quality• 21 x MM/AF sockets• 5 accessories
MC22M
22 PIECE 1" Sq. Dr.METRIC SOCKET SET• 17 metric sockets• 5 accessories
Stock No.02579EX. VAT INC VAT
List Price €920.59 List Price €1113.92
*TSP €479.00 *TSP €579.59
Draper Tools is delighted to be “Prime Sponsor - Tooling” for the UnitedAutosports race team and a major sponsor of Joe Osborne - one of their driverswho is a British Racing Drivers Club (BRDC) “rising star”
Draper Tools will have significant branding on the Audi-backed R8 LMS sportscars which will be racing in the FIA GT3 European andBritish Championships. Drivers like JoeOsborne (right) put their trust in theirmechanics - the United Autosportsmechanics put their trust inDraper Tools.
Stock No.02362EX. VAT INC VAT
List Price €392.14 List Price €474.48
*TSP €184.50 *TSP €223.25
Stock No.02578EX. VAT INC VAT
List Price €401.69 List Price €486.04
*TSP €189.96 *TSP €229.85
MC17M
17 PIECE 3/4" Sq. Dr.METRIC SOCKET SETWITH EXTENDABLERATCHET• Expert Quality• 12 metric sockets• 5 accessories
SD26AMA
26 PIECE 3/4" Sq. Dr.MM/AF COMBINEDSOCKET SET• Silverdrive® socket set• 11 metric sockets• 10 AF sockets• 5 accessories
Health and safety information:This set is a heavy item;
requires two people to lift
Stock No.89029EX. VAT INC VAT
List Price €300.84 List Price €364.02
*TSP €120.00 *TSP €145.20
W2tools-1 EUR 9/9/11 12:15 Page 6
*Typical Selling Price - may vary in-store. Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc 7
STK150N
149 PIECE 1/4, 3/8, 1/2" Sq. Dr.METRIC SOCKET AND SOCKET BITSET1/4” sq. drive• 20 Draper Expert HI-TORQ sockets• 5 Draper TX-STAR sockets• 30 assorted socket bits3/8” sq. drive• 17 Draper Expert HI-TORQ sockets• 5 Draper TX-STAR sockets• 4 accessories1/2” sq. drive• 24 Draper Expert HI-TORQ sockets• 3 Draper TX-STAR sockets• 5 accessories Bit and Tools• 24 popular 5/16” hex. insert bits• 7 hexagon keys 1.5 - 4.0mm
TK114N
114 PIECE 1/4, 3/8" Sq. Dr. TOOL KIT1/4” sq. drive• 32 Draper Expert HI-TORQ MM/AF sockets• 7 accessories 3/8” sq. drive• 35 Draper Expert HI-TORQ MM/AF sockets• 2 Draper Expert HI-TORQ metric spark plug
sockets 10 and 14mm• 4 accessories Bit and Tools• 24 popular insert bits• 10 metric combination wrenches 8-19mm
TK150N
150 PIECE 1/4, 3/8, 1/2" Sq. Dr. TOOLKIT1/4” sq. drive• 32 Draper Expert HI-TORQ MM/AF sockets• 4 accessories 3/8” sq. drive• 43 Draper Expert HI-TORQ MM/AF sockets• 6 accessories 1/2” sq. drive• 25 Draper Expert HI-TORQ MM/AF sockets• 2 Draper Expert HI-TORQ spark plug sockets
10 and 14mm• 4 accessories Bit and Tools• 24 popular insert bits• 10 metric combination wrenches 8-19mm
Stock No.02363EX. VAT INC VAT
List Price €345.58 List Price €418.15
*TSP €159.92 *TSP €193.50
Stock No.02364EX. VAT INC VAT
List Price €236.64 List Price €286.33
*TSP €105.00 *TSP €127.05
Stock No.02365EX. VAT INC VAT
List Price €376.63 List Price €455.72
*TSP €169.96 *TSP €205.65
Expert Quality, selected steels hardened, tempered, chrome plated and polished for corrosion protection.
VTX71AM
71 PIECE 20mm DRAPER EXPERTVORTEX GEAR-RATCHET, 1/4, 3/8" Sq.Dr. MM/AF COMBINED SOCKET SET• Expert Quality• The unique hollow socket technology of the Draper
Expert VORTEX ratchet and sockets is ideal for longfixings. The sockets are edge driven thus allowing afixing to pass through the head and avoid the depthrestriction of conventional sockets and ratchets
• 17 x 20mm MM an AF Vortex sockets and 4accessories
• 18 x 1/4” MM and AF sockets and 2 accessories• 19 x 3/8” MM and AF sockets, and 2 accessories• 9 x 1/4” bits• Set generally covers sizes 4-19mm and 5/32”-13/16”AF
VTX38MM
38 PIECE 13mm and 30mm METRICDRAPER EXPERT VORTEX GEAR-RATCHET SOCKET SET• Expert Quality• Unique hollow socket technology of the Draper Expert
VORTEX ratchet and sockets is ideal for long fixings.The sockets are edge driven. This allows a fixing topass through the head and avoid the depth restrictionof conventional sockets and ratchets.
• 14 x 20mm metric Vortex sockets and 5 accessories• 14 x 30mm metric Vortex sockets and 5 accessories
Stock No.71244EX. VAT INC VAT
List Price €173.88 List Price €210.39
*TSP €73.51 *TSP €88.95
Stock No.40174EX. VAT INC VAT
List Price €254.40 List Price €307.82
*TSP €125.00 *TSP €151.25
vortexa different type
of socket set
Draper Expert Vortex- the revolutionarysocket system...The unique hollow socket technologyof the Draper Expert VORTEX ratchetand sockets is ideal for long fixings.The sockets are edge driven.Thisallows a fixing to pass through thehead and avoid the depth restrictionof conventional sockets and ratchets.
W2tools-1 EUR 9/9/11 12:15 Page 7
8
1/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SOCKETS • Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished forcorrosion protection
1/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC DEEPSOCKETS • Expert Quality• Chrome vanadium steel hardened, tempered,
chrome plated and polished for corrosionprotection
• 6 point• 50mm long
1/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SATINCHROME SOCKETS• Expert Quality• Chrome vanadium steel hardened,
tempered and satin chrome plated• Knurled ring for extra grip
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09818 5.0mm €2.98 €3.60 €2.65 €3.2109819 5.5mm €2.98 €3.60 €2.65 €3.2109820 6.0mm €2.98 €3.60 €2.65 €3.2109821 7.0mm €2.98 €3.60 €2.65 €3.2109822 8.0mm €2.98 €3.60 €2.65 €3.2109823 10mm €2.98 €3.60 €2.65 €3.2109824 12mm €2.98 €3.60 €2.65 €3.2109825 13mm €2.98 €3.60 €2.65 €3.21
1/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SATINCHROME DEEP SOCKETS• Expert Quality• Chrome vanadium steel hardened, tempered
and satin chrome plated• Knurled ring for extra grip
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09826 7 mm €5.11 €6.19 €4.60 €5.5709827 8 mm €5.11 €6.19 €4.60 €5.5709828 10mm €5.11 €6.19 €4.60 €5.5709829 13mm €5.11 €6.19 €4.60 €5.57
3/8" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SOCKETS • Expert Quality• Chrome vanadium steel hardened, tempered,
chrome plated and polished
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
53213 6mm €2.64 €3.19 €2.40 €2.9053221 7mm €2.64 €3.19 €2.40 €2.9053239 8mm €2.64 €3.19 €2.40 €2.9053247 9mm €2.64 €3.19 €2.40 €2.9053255 10mm €2.64 €3.19 €2.40 €2.9053263 11mm €2.64 €3.19 €2.40 €2.9053271 12mm €2.64 €3.19 €2.40 €2.9053289 13mm €2.64 €3.19 €2.40 €2.9053297 14mm €2.64 €3.19 €2.40 €2.9053304 15mm €2.64 €3.19 €2.40 €2.9053312 16mm €2.64 €3.19 €2.40 €2.9053320 17mm €3.36 €4.07 €2.98 €3.6153338 18mm €3.36 €4.07 €2.98 €3.6153346 19mm €3.36 €4.07 €2.98 €3.6153370 22mm €3.65 €4.41 €3.25 €3.93
3/8" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC DEEPSOCKETS • Expert Quality• 65mm long• Chrome vanadium steel hardened, tempered,
chrome plated and polished
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
53576 8mm €5.40 €6.53 €4.85 €5.8753592 10mm €5.40 €6.53 €4.85 €5.8753617 12mm €5.40 €6.53 €4.85 €5.8753625 13mm €5.40 €6.53 €4.85 €5.8753633 14mm €5.40 €6.53 €4.85 €5.8753641 15mm €6.07 €7.35 €5.50 €6.6653659 16mm €6.07 €7.35 €5.50 €6.6653667 17mm €6.43 €7.78 €5.80 €7.0253683 19mm €6.43 €7.78 €5.80 €7.02
3/8" Sq. Dr. DRAPER EXPERTHI-TORQ SATIN CHROMEMETRIC SOCKETS• Expert Quality• Chrome vanadium steel hardened,
tempered, satin chrome plated• Knurled ring for extra grip
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09830 6mm €3.07 €3.72 €2.75 €3.3309831 7mm €3.07 €3.72 €2.75 €3.3309832 8mm €3.07 €3.72 €2.75 €3.3309833 9mm €3.07 €3.72 €2.75 €3.3309834 10mm €3.07 €3.72 €2.75 €3.3309835 11mm €3.07 €3.72 €2.75 €3.3309836 12mm €3.07 €3.72 €2.75 €3.3309837 13mm €3.07 €3.72 €2.75 €3.3309838 14mm €3.07 €3.72 €2.75 €3.3309839 15mm €3.07 €3.72 €2.75 €3.3309840 16mm €3.07 €3.72 €2.75 €3.3309841 17mm €3.91 €4.73 €3.50 €4.2409842 18mm €3.91 €4.73 €3.50 €4.2409843 19mm €3.91 €4.73 €3.50 €4.2409844 22mm €4.22 €5.11 €3.80 €4.60
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
51803 5.0mm €2.57 €3.11 €2.30 €2.7851804 5.5mm €2.57 €3.11 €2.30 €2.7851805 6.0mm €2.57 €3.11 €2.30 €2.7851806 7.0mm €2.57 €3.11 €2.30 €2.7851807 8.0mm €2.57 €3.11 €2.30 €2.7851808 10mm €2.57 €3.11 €2.30 €2.7851809 12mm €2.57 €3.11 €2.30 €2.7851810 13mm €2.57 €3.11 €2.30 €2.78
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
51811 7mm €4.42 €5.34 €3.95 €4.7851812 8mm €4.42 €5.34 €3.95 €4.7851813 10mm €4.42 €5.34 €3.95 €4.7851814 13mm €4.42 €5.34 €3.95 €4.78
W2tools-1 EUR 9/9/11 12:15 Page 8
*Typical Selling Price - may vary in-store. 9
3/8" Sq. Dr. DRAPER EXPERTHI-TORQ SATIN CHROMEMETRIC DEEP SOCKETS• Expert Quality• Chrome vanadium steel hardened, tempered and
satin chrome plated with knurled ring for extra grip
1/2" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SOCKETS • Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished
1/2" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC DEEPSOCKETS• Expert Quality• 80mm long• Chrome vanadium steel hardened,
tempered, chrome plated and polished
1/2" Sq. Dr. DRAPEREXPERT HI-TORQ SATINCHROME METRIC SOCKETS• Expert Quality• Chrome vanadium steel hardened,
tempered, satin chrome plated• Knurled ring for extra grip
1/2" Sq. Dr. DRAPER EXPERTHI-TORQ SATIN CHROMEMETRIC DEEP SOCKETS• Expert Quality• Chrome vanadium steel hardened, tempered,
satin chrome plated• Knurled ring for extra grip
Draper Expert automotive socketry
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09845 8mm €6.26 €7.58 €5.65 €6.8409846 10mm €6.26 €7.58 €5.65 €6.8409847 12mm €6.26 €7.58 €5.65 €6.8409848 13mm €6.26 €7.58 €5.65 €6.8409849 14mm €6.26 €7.58 €5.65 €6.8409850 15mm €7.01 €8.48 €6.30 €7.6209851 16mm €7.01 €8.48 €6.30 €7.6209852 17mm €7.44 €9.00 €6.70 €8.1109853 19mm €7.46 €9.03 €6.70 €8.11
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
34338 8mm €3.53 €4.27 €3.20 €3.8734346 9mm €3.53 €4.27 €3.20 €3.8734354 10mm €3.53 €4.27 €3.20 €3.8734362 11mm €3.53 €4.27 €3.20 €3.8734370 12mm €3.53 €4.27 €3.20 €3.8734388 13mm €3.53 €4.27 €3.20 €3.8734396 14mm €3.53 €4.27 €3.20 €3.8734403 15mm €3.53 €4.27 €3.20 €3.8734411 16mm €3.53 €4.27 €3.20 €3.8734429 17mm €3.53 €4.27 €3.20 €3.8734437 18mm €4.03 €4.88 €3.65 €4.4234445 19mm €4.03 €4.88 €3.65 €4.4276883 20mm €5.26 €6.36 €4.75 €5.7576875 21mm €5.26 €6.36 €4.75 €5.7576867 22mm €5.26 €6.36 €4.75 €5.7576859 23mm €5.26 €6.36 €4.75 €5.7576841 24mm €5.26 €6.36 €4.75 €5.7576833 25mm €6.43 €7.78 €5.80 €7.0276825 26mm €6.43 €7.78 €5.80 €7.0276817 27mm €7.27 €8.80 €6.50 €7.8776809 28mm €7.27 €8.80 €6.50 €7.8776792 30mm €7.27 €8.80 €6.50 €7.8776784 32mm €7.49 €9.06 €6.75 €8.17
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09854 8mm €4.03 €4.88 €3.65 €4.4209855 9mm €4.03 €4.88 €3.65 €4.4209856 10mm €4.03 €4.88 €3.65 €4.4209857 11mm €4.03 €4.88 €3.65 €4.4209858 12mm €4.03 €4.88 €3.65 €4.4209859 13mm €4.03 €4.88 €3.65 €4.4209860 14mm €4.03 €4.88 €3.65 €4.4209861 15mm €4.03 €4.88 €3.65 €4.4209862 16mm €4.03 €4.88 €3.65 €4.4209863 17mm €4.10 €4.97 €3.75 €4.5409864 18mm €4.70 €5.69 €4.25 €5.1409865 19mm €4.70 €5.69 €4.25 €5.1409866 20mm €6.07 €7.35 €5.50 €6.6609867 21mm €6.07 €7.35 €5.50 €6.6609868 22mm €6.07 €7.35 €5.50 €6.6609869 23mm €6.07 €7.35 €5.50 €6.6609870 24mm €6.07 €7.35 €5.50 €6.6609871 25mm €7.44 €9.00 €6.75 €8.1709872 26mm €7.44 €9.00 €6.75 €8.1709873 27mm €8.40 €10.16 €7.50 €9.0809874 28mm €8.40 €10.16 €7.50 €9.0809875 30mm €8.40 €10.16 €7.50 €9.0809876 32mm €8.66 €10.48 €7.80 €9.44
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
76594 10mm €7.85 €9.50 €6.98 €8.4576578 12mm €7.85 €9.50 €6.98 €8.4576560 13mm €7.85 €9.50 €6.98 €8.4576552 14mm €7.85 €9.50 €6.98 €8.4513513 16mm €7.85 €9.50 €6.98 €8.4576544 17mm €7.85 €9.50 €6.98 €8.4528266 18mm €7.85 €9.50 €6.98 €8.4576536 19mm €7.85 €9.50 €6.98 €8.4576528 20mm €9.19 €11.12 €8.30 €10.0476510 22mm €10.06 €12.17 €8.98 €10.8783945 24mm €10.58 €12.81 €9.50 €11.5056185 26mm €12.36 €14.96 €11.15 €13.4956186 27mm €13.01 €15.74 €11.75 €14.2256187 30mm €13.56 €16.41 €12.20 €14.7756188 32mm €14.38 €17.39 €12.95 €15.67
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
09877 10mm €9.10 €11.01 €8.25 €9.9809878 12mm €9.10 €11.01 €8.25 €9.9809879 13mm €9.10 €11.01 €8.25 €9.9809880 14mm €9.10 €11.01 €8.25 €9.9809881 16mm €9.10 €11.01 €8.25 €9.9809882 17mm €9.10 €11.01 €8.25 €9.9809883 18mm €9.10 €11.01 €8.25 €9.9809884 19mm €9.10 €11.01 €8.25 €9.9809885 20mm €10.63 €12.86 €9.60 €11.6209886 22mm €11.62 €14.06 €10.50 €12.7109887 24mm €12.22 €14.78 €10.98 €13.2909888 26mm €14.28 €17.28 €12.85 €15.5509889 27mm €15.05 €18.21 €13.50 €16.3409890 30mm €15.70 €18.99 €14.15 €17.1209891 32mm €16.63 €20.12 €14.98 €18.13
W2tools-1 EUR 15/9/11 12:41 Page 9
Draper Expert Multi-Drive® Socketswith knurled ring for extra gripChrome vanadium steel hardened, tempered and chrome plated for corrosion protection.
10
B10M/MDS
10 PIECE SET OF 1/4" Sq. Dr.12 POINT DRAPER EXPERTMULTI-DRIVE® SOCKETS• Expert Quality• Contents: 5-14mm
Stock No.48859 260mmEX. VAT INC VAT
List Price €15.17 List Price €18.35
*TSP €9.00 *TSP €10.89
B10MD/MDS
10 PIECE SET OF 1/4" Sq. Dr.12 POINT DEEP DRAPER EXPERTMULTI-DRIVE® SOCKETS• Expert Quality• Contents: 5-14mm
Stock No.48862 265mmEX. VAT INC VAT
List Price €24.29 List Price €29.39
*TSP €13.50 *TSP €16.34
D9M/MDS
9 PIECE SET OF 3/8" Sq. Dr.12 POINT DRAPER EXPERTMULTI-DRIVE® SOCKETS• Expert Quality• Contents: 10-18mm
Stock No.48857 300mmEX. VAT INC VAT
List Price €20.02 List Price €24.22
*TSP €10.75 *TSP €13.01
D9MD/MDS
9 PIECE SET OF 3/8" Sq. Dr.12 POINT DEEP DRAPER EXPERTMULTI-DRIVE® SOCKETS• Expert Quality• Contents: 10-19mm
Stock No.48861 330mmEX. VAT INC VAT
List Price €30.26 List Price €36.62
*TSP €16.20 *TSP €19.60
H10M/MDS
10 PIECE SET OF 1/2" Sq. Dr.12 POINT DRAPER EXPERTMULTI-DRIVE® SOCKETS• Expert Quality• Contents: 9, 10, 11, 12, 13,
14, 15, 17, 18 and 19mm
Stock No.48858 350mmEX. VAT INC VAT
List Price €30.26 List Price €36.62
*TSP €16.20 *TSP €19.60
H6MD/MDS
6 PIECE SET OF 1/2" Sq. Dr.12 POINT DEEP DRAPEREXPERT MULTI-DRIVE®
SOCKETS• Expert Quality• Contents: 13-18mm
Stock No.48860 300mmEX. VAT INC VAT
List Price €29.23 List Price €35.37
*TSP €17.40 *TSP €21.05
These all-purpose Multi-Drive® 12 point sockets allowthis set to be used on hexagon,“Draper TX-STAR”,metric and AF fixings - making it the idealmaintenance set when you just don’t know whichfixings have been used.
W2tools-1 EUR 9/9/11 12:15 Page 10
*Typical Selling Price - may vary in-store. Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd.Draper Expert Multi-Drive® is a registered trademark of Draper Tools Ltd. 11
B13M
13 PIECE SET OF 1/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SOCKETS• Expert Quality• Contents: 4.0, 4.5, 5.0, 5.5, 6.0, 7.0, 8.0,
9.0, 10, 11, 12, 13 and 14mm• Socket bar
length: 133mm
Stock No.30776 235mmEX. VAT INC VAT
List Price €15.17 List Price €18.35
*TSP €8.10 *TSP €9.80
BHT10AM
10 PIECE SET OF 1/4" Sq. Dr. MM/AF COMBINED DEEPDRAPER EXPERT HI-TORQ SOCKETS• Expert Quality• Contents: 6, 8, 10, 11, 13mm and 1/4, 5/16, 3/8, 7/16 1/2” AF• Socket bar
length: 160mm
D10MM
10 PIECE SET OF 3/8" Sq. Dr. DRAPER EXPERT HI-TORQMETRIC SOCKETS• Expert Quality• Contents: 8, 9, 10, 11, 12, 13, 14, 15, 17 and 19mm• Socket bar
length: 210mm
D8M
8 PIECE SET OF 3/8" Sq. Dr. DEEP DRAPER EXPERTHI-TORQ METRIC SOCKETS• Expert Quality• Contents: 10, 11,
12, 13, 14, 15,17 and 19mm
• Socket barlength: 200mm
EXTRA LONG QUICK RELEASESOFT GRIP REVERSIBLE RATCHETS
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
02593 1/4” 225mm €46.10 €55.79 €24.30 €29.4002594 3/8” 305mm €49.39 €59.76 €26.10 €31.5802595 1/2” 385mm €59.28 €71.73 €30.60 €37.03
QUICK RELEASEREVERSIBLE RATCHETS
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
34357 1/4” 220mm €30.22 €36.56 €17.95 €21.7233066 3/8” 246mm €37.73 €45.65 €20.35 €24.6234398 1/2” 140mm €48.96 €59.24 €27.99 €33.87
LOW PROFILE 60 TOOTH SOFT GRIPREVERSIBLE RATCHETS
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
02599 1/4” 150mm €35.57 €43.04 €19.15 €23.1702600 3/8” 220mm €39.48 €47.77 €21.00 €25.4102601 1/2” 275mm €50.71 €61.36 €28.50 €34.49
B44BS
1/4" Sq. Dr. QUICK RELEASE REVERSIBLESOFT GRIP STUBBY RATCHET
Stock No.12705 160mmEX. VAT INC VAT
List Price €19.94 List Price €24.13
*TSP €10.75 *TSP €13.01
Stock No.19070 210mmEX. VAT INC VAT
List Price €19.94 List Price €24.13
*TSP €11.25 *TSP €13.61
Stock No.73182 200mmEX. VAT INC VAT
List Price €22.03 List Price €26.66
*TSP €12.75 *TSP €15.43
Stock No.71959EX. VAT INC VAT
List Price €32.42 List Price €39.23
*TSP €18.60 *TSP €22.51
• Expert Quality• Fine 45 tooth ratchet• Forward/reverse selector• Chrome vanadium steel hardened, tempered, satin
chrome plated for corrosion protection
• Expert Quality• Fine 48 tooth ratchet• Chrome vanadium steel hardened, tempered, satin
chrome plated for corrosion protection
• Expert Quality• Low profile head thickness: 12mm• Quick release mechanism• Forward/reverse selector• Chrome vanadium steel hardened, tempered,
satin chrome plated for corrosion protection
Draper ExpertHHII--TTOORRQQ® sockets
• Expert Quality• Length 105mm• Fine 45 tooth ratchet• Quick release mechanism
All these sockets are manufactured from chromevanadium steel hardened, tempered and chrome platedfor corrosion protection.
reversible ratchets...Professional quality reversible ratchets featuring fine 45, 48 or 60tooth ratchets to ensure smooth and quick operation. Many ofthese ratchets have soft grip handles to prevent blisters followingrepeated use. All are chrome vanadium steel hardened,tempered and chrome plated for corrosion protection.That’s theDraper difference!
W2tools-1 EUR 9/9/11 12:16 Page 11
draper expert qualityflexible handles
12
Stock No.00428EX. VAT INC VAT
List Price €5.57 List Price €6.74
*TSP €3.85 *TSP €4.66
SR
3/8" Sq. Dr. QUICK RELEASE SOFT GRIPREVERSIBLE SPINNER RATCHET• Expert Quality• Length: 250mm• Chrome vanadium steel hardened, tempered and chrome plated for corrosion protection• Fine 45 tooth ratchet• Flexible head
which can beswung through270°
• Forward/reverseselector
Stock No.40139EX. VAT INC VAT
List Price €42.79 List Price €51.78
*TSP €22.75 *TSP €27.53
FLEXIBLE HANDLES• Expert Quality• Chrome vanadium steel hardened, tempered,
chrome plated and polished
H24EXT
1/2" Sq. Dr. 600mm EXTENDING FLEXIBLE HANDLE• Expert Quality• Locking handle
Stock No.56774EX. VAT INC VAT
List Price €41.59 List Price €50.33
*TSP €20.95 *TSP €25.35
UNIVERSAL JOINTS• Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished
EXTENSION BARS• Expert Quality• Chrome vanadium steel hardened, tempered,
chrome plated and polished
Extends from400 to 600mm
B50
1/4" Sq. Dr. 150mmSPINNER HANDLE• Expert Quality• Handle end has 1/4” square
drive female aperture for usewith 1/4” squaredrive maleaccessories
Draper Tools has been chosen as thepreferred supplier to the
mechanics working on SantaPod’s own show vehicles and
the engineers at “the pod”who use Draper Tools in
their day-to-daymaintenance of the track
and estate.
SLIDING TEE BARS• Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
26870 1/4” 130mm €9.24 €11.18 €5.95 €7.2068791 3/8” 200mm €16.80 €20.33 €10.75 €13.0127523 1/2” 250mm €21.26 €25.73 €13.50 €16.3475843 1/2” 375mm €23.52 €28.46 €14.35 €17.3633596 1/2” 600mm €34.70 €41.99 €17.50 €21.18
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
26838 1/4” 105mm €7.01 €8.48 €4.50 €5.4574366 3/8” 164mm €9.07 €10.98 €5.60 €6.7827531 1/2” 250mm €11.28 €13.65 €7.50 €9.08
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
09917 1/4” 38mm €8.78 €10.63 €5.70 €6.9009925 3/8” 55mm €11.40 €13.79 €7.20 €8.7109929 1/2” 75mm €14.30 €17.31 €9.20 €11.13
Stock List Price List Price *TSP *TSPNo. Sq. Dr. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
00436 1/4” 50mm €2.88 €3.48 €1.95 €2.3626854 1/4” 75mm €3.38 €4.09 €2.25 €2.7226862 1/4” 150mm €5.33 €6.45 €3.50 €4.2467769 3/8” 75mm €4.42 €5.34 €2.95 €3.5767751 3/8” 150mm €5.62 €6.80 €3.60 €4.3667743 3/8” 200mm €7.08 €8.57 €4.75 €5.7567735 3/8” 300mm €11.90 €14.40 €7.80 €9.4474275 1/2” 75mm €7.08 €8.57 €4.75 €5.7527557 1/2” 125mm €7.78 €9.41 €5.10 €6.1727549 1/2” 250mm €11.52 €13.94 €7.75 €9.38
W2tools-1 EUR 9/9/11 12:16 Page 12
*Typical Selling Price - may vary in-store. 13
WBB/4
4 PIECE 1/4" Sq. Dr. WOBBLE EXTENSION BAR SET• Expert Quality• Contents: 50, 100, 150 and 250mm long• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome plated and polished• Spring-loaded ball bearing end is flexible which allows
bar to swivel for easier access to difficult locations
Stock No.57074EX. VAT INC VAT
List Price €17.81 List Price €21.55
*TSP €10.75 *TSP €13.01
WBD/5
5 PIECE 3/8" Sq. Dr. WOBBLE EXTENSION BAR SET• Expert Quality• Contents: 45, 75, 150, 250 and 450mm• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome plated and polished• Spring-loaded ball bearing for secure socket holding
WBH/4
4 PIECE 1/2" Sq. Dr. WOBBLE EXTENSION BAR SET• Expert Quality• Contents: 50, 125, 250 and 500mm• Allows sockets to be driven at up to 15° off vertical• Chrome vanadium steel hardened, tempered, chrome plated and polished• Spring-loaded ball bearing for secure socket holding
D67ABC
3 PIECE SOCKETCONVERTER SET• Expert Quality• Three piece set covering all
connections between 1/4”,3/8” and 1/2” square drives
• Chrome vanadium steelhardened, tempered,chrome plated andpolished for corrosionprotection
WB9
9 PIECE 1/4, 3/8, 1/2" Sq. Dr.WOBBLE EXTENSIONBAR SET• Expert Quality• Contents: 3 x 1/4” sq. dr; 4 x 3/8” sq. dr.
and 2 x 1/2” sq. dr. bar lengths• Allows sockets to be driven
at up to 15° off vertical• Chrome vanadium steel hardened,
tempered, chrome platedand polished
• Spring-loaded ball bearingfor secure socket holding
Stock No.32997EX. VAT INC VAT
List Price €47.23 List Price €57.15
*TSP €25.80 *TSP €31.22
Wobble extension bars are very useful in locations whereaccess to the work area is obstructed or difficult.
The wobble extension bar is fitted into the accessory e.g.a socket, and the user can turn it at an offset angle of upto 15° - see illustration.
15°
Stock No.34962EX. VAT INC VAT
List Price €11.38 List Price €13.76
*TSP €7.15 *TSP €8.65
Stock No.19799EX. VAT INC VAT
List Price €38.40 List Price €46.46
*TSP €22.20 *TSP €26.86
Stock No.19798EX. VAT INC VAT
List Price €35.83 List Price €43.36
*TSP €21.50 *TSP €26.02
wobbleextensionbar sets
W2tools-1 EUR 9/9/11 12:16 Page 13
14
1/2" Sq. Dr. DRAPER TX-STARSOCKET BITS• Expert Quality• S2 silicon steel bit• Chrome vanadium steel hardened, tempered,
chrome plated and polished socket
Stock List Price List Price *TSP *TSPNo. Tip Length ex. VAT Inc. VAT ex. VAT Inc. VAT
55659 T40 55mm €7.99 €9.67 €7.25 €8.7755660 T40 100mm €8.62 €10.43 €7.75 €9.3855661 T45 55mm €7.99 €9.67 €7.25 €8.7755662 T45 100mm €8.62 €10.43 €7.75 €9.3855664 T50 55mm €7.99 €9.67 €7.25 €8.7755665 T50 100mm €8.62 €10.43 €7.75 €9.3855666 T55 55mm €7.99 €9.67 €7.25 €8.7755667 T55 100mm €8.62 €10.43 €7.75 €9.3831382 T55 140mm €11.93 €14.43 €10.75 €13.0155668 T60 55mm €8.78 €10.63 €7.95 €9.6255669 T60 100mm €9.43 €11.41 €8.50 €10.2955670 T70 55mm €8.78 €10.63 €7.95 €9.6255672 T70 100mm €9.43 €11.41 €8.50 €10.29
4404
7 PIECE 3/8" Sq. Dr. DRAPERTX-STAR BIT SET• Expert Quality• Bit holder 8mm x 3/8” sq. drive• 6 x Draper TX-STAR bits: T20, T25, T30, T40, T45 and
T50 x 30mm long
Stock No.12793EX. VAT INC VAT
List Price €8.88 List Price €10.74
*TSP €5.95 *TSP €7.20
3404A
8 PIECE 1/2" Sq. Dr. DRAPERTX-STAR BIT SET• Expert Quality• 6 Draper TX-STAR bits: T20, T25,
T30, T40, T45 and T50 x 30mm long,1 Draper TX-STAR bit T55 x 75mmlong and bit holder10mm x 1/2” sq drive
Stock No.12200EX. VAT INC VAT
List Price €12.26 List Price €14.84
*TSP €7.20 *TSP €8.71
PS1407
7 PIECE DRAPER TX-STARPRECISION DRIVER SET• Expert Quality• Contents:T6, T7, T8, T9, T10, T15 and T20• Hardened and tempered SNCM steel blades, satin
chrome plated with black tips• Coloured nylon handles with revolving tops
Stock No.50580EX. VAT INC VAT
List Price €17.26 List Price €20.88
*TSP €10.75 *TSP €13.01
TXT953/11
11 PIECE MECHANICS PATTERNDRAPER TX-STAR SECURITY DRIVERSET• Contents: T6T, T7T, T8T, T9T, T10T, T15T, T20T, T25T,
T27T, T30T and T40T• Square matt black handles manufactured from high
impact resistant plastic• Satin chrome plated chrome vanadium steel blades
hardened tempered with sand blasted tips
Stock No.53515EX. VAT INC VAT
List Price €46.20 List Price €55.90
*TSP €23.55 *TSP €28.50
TTX/SG/8
8 PIECE SOFT GRIP ‘T’ HANDLEDRAPER TX-STAR KEY SET• Expert Quality• Contents: T9, T10, T15, T20 and T25 long leg 100mm x
short leg 13mm; T27, T30 and T40 long leg 135mm xshort leg 15mm
• Conventional DraperTX-STAR end on thelong arm and tamperproofDraper TX-STAR end onthe short arm
Stock No.08376EX. VAT INC VAT
List Price €42.12 List Price €50.97
*TSP €26.95 *TSP €32.61
TXTB9
9 PIECE DRAPER TX-STAR BALL ENDKEY SET• Contents: T10, T15, T20, T25, T27,
T30, T40, T45 and T50• Ball end on the long arm and
conventional ends on theshort arm
• The ball end hexagon tipallows the hexagon key tobe used up to 15° fromthe screwhead recess
• Held in plasticstorage holderwith belt clip
Stock No.73035EX. VAT INC VAT
List Price €36.07 List Price €43.65
*TSP €20.50 *TSP €24.81
COMPATIBILITY OF “DRAPER TX-STAR”AND TORX†The “Draper TX-STAR” profile is totally compatiblewith the Torx† fixing system. Users of “Draper TX-STAR” products need have no fear concerningcompatibility.All “Draper TX-STAR”products have beenthoroughly tested as totheir compatibility.
Draper TX-STARproducts
fully compatible with Torx† fixings
W2tools-1 EUR 15/9/11 12:41 Page 14
15
BDH14TX
14 PIECE SET OF 1/4, 3/8, 1/2" Sq. Dr.DRAPER TX-STAR SOCKETS• Expert Quality• Contents: 1/4” sq dr E4-E8, 3/8” sq dr E10-E14 and 1/2”
sq dr E16-E24• Bar length: 320mm• Manufactured from chrome vanadium steel, hardened,
tempered with satinized finish
Stock No.35381EX. VAT INC VAT
List Price €35.66 List Price €43.15
*TSP €19.26 *TSP €23.30
TX5T/7
7 PIECE 1/4" Sq. Dr. FIVE LOBEDRAPER TX-STAR SECURITYSOCKET BIT SET• Expert Quality• Contents: TX10, TX15, TX20,
TX25, TX27, TX30 and TX40• S2 silicon steel bit• Bar length: 125mm
Stock No.71394EX. VAT INC VAT
List Price €14.76 List Price €17.86
*TSP €8.35 *TSP €10.10
T-TX/4/SET
4 PIECE SET OF 1/2" Sq. Dr. DRAPERTX-STAR SOCKET BITS• Expert Quality• Contents: T40, T45, T55 and T70 socket
bits 100mm long• Bar length 125mm
Stock No.73730EX. VAT INC VAT
List Price €30.43 List Price €36.82
*TSP €16.20 *TSP €19.60
410/8/TX
8 PIECE 1/2" Sq. Dr. IMPACT DRAPERTX-STAR SOCKET BIT SET• Expert Quality• Contents: T30-T80 Draper TX-STAR
impact bits x 78mm long• Chrome molybdenum steel hardened and
tempered with a black phosphate finishfor corrosion protection
Stock No.60474EX. VAT INC VAT
List Price €84.50 List Price €102.25
*TSP €43.00 *TSP €52.03
415/5/TX-STAR
8 PIECE 1/2" SQ. DR. WOBBLEIMPACT DRAPER TX-STAR SOCKETBIT SET• Expert Quality• Contents: T30, T40, T45, T50, T55, T60, T70 and T80• Hexagonal bit wobble feature allows bit to swivel 20°
for work in restriced areas• Chrome molybdenum steel hardened and tempered
Stock No.24002EX. VAT INC VAT
List Price €88.54 List Price €107.13
*TSP €45.50 *TSP €55.06
T-TX32
32 PIECE 1/2" Sq. Dr. DRAPERTX-STAR SOCKET BIT SET
• Expert Quality• Contents: 10 Draper TX-STAR socket bits T20-T70 x
55mm long; 10 Draper TX-STAR socket bits T20-T70 x100mm long; 6 Draper TX-STAR socket bits T40-T70 x140mm long; 6 Draper TX-STAR socket bits T40-T70 x200mm long
• Sockets forged from chrome vanadium steel hardenedand tempered • Bits from S2 steel with a chemicallyblacked finish for corrosion protection • Sockets havea half polished and half satin chromefinish • Groove and two holes forretaining ring and pin
Stock No.04277EX. VAT INC VAT
List Price €143.40 List Price €173.51
*TSP €85.80 *TSP €103.82
ITS6
6 PIECE 3/4" Sq. Dr. IMPACTSOCKET AND DRAPER TX-STARBITS SET
• Expert Quality• Contents: Impact socket bit holder 3/4” sq. dr x 22mm
hex.; 4 Draper TX-STAR impact bits size: T70, T80, T90and T100; hexagon key
• Bit holders has ball and groove for rings and pins• Chrome molybdenum hardened and tempered and
chemically blacked for corrosion protection
Stock No.04298EX. VAT INC VAT
List Price €107.94 List Price €130.61
*TSP €66.00 *TSP €79.86
*Typical Selling Price - may vary in-store. Draper TX-STAR products are compatible with †Torx fixings systems. †Torx is the registered trademark of Camcar/Textron Inc.
FIVELOBE
W2tools-1 EUR 9/9/11 12:16 Page 15
16
MH40/SC
40 PIECE 3/8, 1/2" Sq. Dr.MECHANICS BIT SET• Expert Quality• Contents: 2 bit holders, 14 Draper TX-STAR,
14 hexagonal and 10 XZN spline bits• Insert bits and bit holders manufactured
from good quality steel
Stock No.21932EX. VAT INC VAT
List Price €51.12 List Price €61.86
*TSP €27.52 *TSP €33.30
RIBE/7/SET
7 PIECE SET OF 3/8, 1/2" Sq. Dr.RIBE™ SOCKET BITS ON SOCKETRAIL• Expert Quality• Contents: 3/8” sq.drive. M6-M10, 1/2” sq.drive.
M12-M14• Chrome vanadium steel sockets• Suitable for use on Fiat, Lancia, Alfa-Romeo
and many other applications
Stock No.67065EX. VAT INC VAT
List Price €30.79 List Price €37.26
*TSP €16.25 *TSP €19.66
1/2" Sq. Dr. METRIC HEXAGONALSOCKET BITS• Expert Quality• S2 silicon steel bit• Chrome vanadium steel hardened, tempered, chrome
plated and polished socket• Overall length including socket 55mm
408
1/2" Sq. Dr. HEAVY DUTY STUD EXTRACTOR• Expert Quality
Stock No.14156EX. VAT INC VAT
List Price €26.83 List Price €32.47
*TSP €14.25 *TSP €17.24
SES
4 PIECE 1/2" Sq. Dr. STUDEXTRACTOR SET• Roller type with 21mm hexagon on end of socket• Unscrews both left and right hand threads• Contents: 6, 8, 10 and 12mm
Stock No.55641EX. VAT INC VAT
List Price €48.26 List Price €58.40
*TSP €25.00 *TSP €30.25
3/4" Sq. Dr. DRAPER EXPERTHI-TORQ METRIC SOCKETS• Expert Quality• 12 point sockets• Chrome vanadium steel hardened, tempered,
chrome plated and polished
mechanicsbit set
Full of replacement bits available.Contact your local Draper stockist.
• Capacity 6 -19mm
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
55646 7mm €7.99 €9.67 €7.25 €8.7755647 8mm €7.99 €9.67 €7.25 €8.7755649 10mm €7.99 €9.67 €7.25 €8.7755651 12mm €8.47 €10.25 €7.65 €9.2671201 19mm €13.99 €16.93 €12.60 €15.25
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
10148 19mm €11.06 €13.39 €9.95 €12.0410149 22mm €11.06 €13.39 €9.95 €12.0410150 24mm €11.06 €13.39 €9.95 €12.0410151 26mm €12.17 €14.72 €10.95 €13.2510152 27mm €12.17 €14.72 €10.95 €13.2510153 28mm €13.01 €15.74 €11.75 €14.2210154 30mm €13.01 €15.74 €11.75 €14.2210155 32mm €14.33 €17.34 €12.90 €15.6010156 33mm €14.81 €17.92 €13.35 €16.1510157 36mm €16.58 €20.07 €14.95 €18.0910159 38mm €19.75 €23.90 €17.80 €21.5410160 41mm €21.36 €25.85 €19.25 €23.2910161 42mm €23.02 €27.85 €20.75 €25.1110162 46mm €26.14 €31.62 €23.50 €28.4410164 50mm €28.34 €34.30 €25.50 €30.8610166 55mm €34.80 €42.11 €31.35 €37.93
W2tools-1 EUR 9/9/11 12:16 Page 16
17
T10A
3/4" Sq. Dr. REVERSIBLE RATCHET• Fine tooth• Forward/reverse selector• Chrome vanadium steel hardened, tempered, chrome
plated and polished
Stock No.33768EX. VAT INC VAT
List Price €83.71 List Price €101.29
*TSP €48.50 *TSP €58.69
T15
3/4" Sq. Dr. EXTENDING REVERSIBLE RATCHET• Expert Quality• Chrome vanadium steel hardened, tempered, chrome plated for corrosion protection• 48 tooth ratchet• Push button to allow handle to extend from 515 (minimum) to 815mm (maximum).
Stock No.03067EX. VAT INC VAT
List Price €130.39 List Price €157.77
*TSP €71.95 *TSP €87.06
3/4" Sq. Dr.EXTENSION BARS• Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished
T24
3/4" Sq. Dr. 600mm FLEXIBLE HANDLE• Expert Quality• Chrome molybdenum steel hardened, tempered, chrome plated and polished
Stock No.55677EX. VAT INC VAT
List Price €59.21 List Price €71.64
*TSP €33.95 *TSP €41.08
T34
3/4" Sq. Dr. EXTENDING FLEXIBLE HANDLE• Expert Quality• Head and shaft manufactured from chrome vanadium steel hardened, tempered and
chrome finish for corrosion protection• 180° hinged joint head.• Pull back collar with knurled ring allows handle to extend from 460 (minimum) to
730mm (maximum)• Extending handle locks in three positions
Stock No.30836EX. VAT INC VAT
List Price €92.11 List Price €111.46
*TSP €52.75 *TSP €63.83
T14
3/4" Sq. Dr. SLIDING TEE BAR• Expert Quality• Chrome vanadium steel hardened, tempered, chrome
plated and polished
Stock No.10169 500mmEX. VAT INC VAT
List Price €49.58 List Price €60.00
*TSP €29.40 *TSP €35.57
T17
3/4" Sq. Dr. UNIVERSAL JOINT• Expert Quality• Chrome vanadium steel hardened, tempered, chrome
plated and polished
Stock No.19604 107mmEX. VAT INC VAT
List Price €49.82 List Price €60.29
*TSP €29.40 *TSP €35.57
SOCKET CONVERTERS • Expert Quality• Chrome vanadium steel hardened,
tempered, chrome plated and polished
*Typical Selling Price - may vary in-store. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc
extendingflexible handle
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
10170 100mm €17.83 €21.58 €10.75 €13.0110171 200mm €26.26 €31.77 €15.50 €18.7610172 400mm €36.02 €43.59 €21.30 €25.77
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
30758 1/2” (F) x 3/4” (M) €10.42 €12.60 €6.90 €8.3530759 3/4” (F) x 1/2” (M) €12.41 €15.01 €8.25 €9.98
460-730mm
515-815mm
W2tools-1 EUR 9/9/11 12:16 Page 17
18
409/18/MM
18 PIECE 3/8" Sq. Dr. DRAPEREXPERT HI-TORQ METRICIMPACT SOCKET SET• Expert Quality• 14 impact metric sockets• 4 accessories• Chrome vanadium steel hardened
and tempered and chemicallyblacked for corrosion protection
Stock No.54714EX. VAT INC VAT
List Price €53.86 List Price €65.17
*TSP €31.15 *TSP €37.69
Stock No.14099 1/2”(F) x 3/8”(M)EX. VAT INC VAT
List Price €11.06 List Price €13.39
*TSP €7.40 *TSP €8.95
1/2" Sq. Dr. DRAPEREXPERT HI-TORQ METRICIMPACT SOCKETS • Expert Quality• Chrome vanadium steel hardened
tempered and chemically blacked forcorrosion protection
1/2" Sq. Dr. DRAPEREXPERT HI-TORQ DEEPMETRIC IMPACT SOCKETS • Expert Quality• Overall length 78mm• Chrome vanadium steel hardened
tempered and chemically blacked
1/2" Sq. Dr.EXTENSION BARS• Expert Quality• Forged from chrome
vanadium steel hardened,tempered and chemicallyblacked for corrosion protection
608
1/2" Sq. Dr. UNIVERSAL JOINT• Expert Quality• Forged from chrome molybdenum steel hardened,
tempered and chemically blacked for corrosionprotection
Stock No.75976 60mmEX. VAT INC VAT
List Price €12.36 List Price €14.96
*TSP €7.75 *TSP €9.38
IMPACT SOCKET CONVERTERS • Expert Quality• Forged from chrome vanadium steel hardened,
tempered and chemically blacked for corrosionprotection
IMPACT SOCKET CONVERTERS• Expert Quality• Forged from chrome molybdenum steel
hardened, tempered and chemically blackedfor corrosion protection
1/2"(F) x 3/8"(M) IMPACTSOCKET CONVERTER
• Expert Quality• Forged from chrome molybdenum steel hardened,
tempered and chemically blacked for corrosionprotection
impact socketconverters
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
28420 10mm €6.70 €8.10 €5.98 €7.2428446 12mm €6.91 €8.36 €6.25 €7.5628454 13mm €6.91 €8.36 €6.25 €7.5628462 14mm €6.91 €8.36 €6.25 €7.5628470 15mm €6.96 €8.42 €6.30 €7.6228488 16mm €6.96 €8.42 €6.30 €7.6228496 17mm €7.42 €8.97 €6.65 €8.0513762 18mm €7.80 €9.44 €6.98 €8.4528503 19mm €7.80 €9.44 €6.98 €8.4528511 21mm €7.99 €9.67 €7.25 €8.7728529 22mm €8.50 €10.28 €7.65 €9.2628545 24mm €10.15 €12.28 €9.15 €11.0728561 27mm €10.15 €12.28 €9.15 €11.0731513 30mm €12.60 €15.25 €11.35 €13.73
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
12737 10mm €11.59 €14.03 €10.45 €12.6412739 12mm €11.59 €14.03 €10.45 €12.6412740 13mm €11.59 €14.03 €10.45 €12.6412741 14mm €11.59 €14.03 €10.45 €12.6414101 15mm €11.59 €14.03 €10.45 €12.6412742 16mm €11.59 €14.03 €10.45 €12.6412743 17mm €12.29 €14.87 €10.98 €13.2914102 18mm €12.29 €14.87 €10.98 €13.2912744 19mm €12.29 €14.87 €10.98 €13.2914104 21mm €12.72 €15.39 €11.45 €13.8512745 22mm €13.20 €15.97 €11.95 €14.4612746 24mm €13.20 €15.97 €11.95 €14.4612748 27mm €18.02 €21.81 €16.25 €19.6630870 30mm €20.23 €24.48 €18.25 €22.0835519 32mm €20.69 €25.03 €18.65 €22.57
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
72170 150mm €14.04 €16.99 €8.75 €10.5963116 250mm €20.42 €24.71 €12.75 €15.43
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
14106 1/2” (F) x 3/4” (M) €17.62 €21.32 €10.98 €13.2914107 3/4”(F) x 1/2”(M) €21.94 €26.54 €13.75 €16.64
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
93481 3/4”(F) x 1”(M) €28.58 €34.59 €26.75 €32.3793499 1”(F) x 3/4”(M) €37.01 €44.78 €34.75 €42.05
W2tools-1 EUR 9/9/11 12:16 Page 18
*Typical Selling Price - may vary in-store. 19
3/4" Sq. Dr. DRAPEREXPERT HI-TORQ DEEPMETRIC IMPACT SOCKETS• Expert Quality• Average length 95mm• Hardened, tempered and chemically
blacked for corrosion protection
3/4" Sq. Dr. IMPACTEXTENSION BARS• Expert Quality• Hardened, tempered and chemically
blacked for corrosion protection• Supplied with pins and ring
415/5/HEX
8 PIECE 1/2" SQ. DR. WOBBLEIMPACT HEXAGONAL SOCKET BITSET• Expert Quality• Contents: 5, 6, 7, 8, 10, 12, 14, and 17mm socket bits• Hexagonal bit wobble feature allows bit to swivel 20°
for work in restriced areas• Chrome molybdenum steel hardened and tempered
allows bit to swivel 20° for work in restricted areas
Stock No.23999EX. VAT INC VAT
List Price €88.54 List Price €107.13
*TSP €45.50 *TSP €55.06
410D/15/MM
15 PIECE 1/2" Sq. Dr. DRAPEREXPERT HI-TORQ METRIC DEEPIMPACT SOCKET SET• Expert Quality• Contents: sockets size: 10, 12, 13, 15, 16, 17, 18, 19,
21, 22, 24 and 27mm• 3 accessories• Chrome vanadium steel hardened, tempered and
chemically blacked for corrosion protection
Stock No.54650EX. VAT INC VAT
List Price €122.47 List Price €148.19
*TSP €64.56 *TSP €78.12
410/8/HEX
8 PIECE 1/2" Sq. Dr. IMPACTHEXAGON SOCKET BIT SET• Expert Quality• Contents: 5-19mm impact hexagon bits x 78mm long• Chrome molybdenum steel hardened, tempered and
chemically blacked for corrosion protection
Stock No.26439EX. VAT INC VAT
List Price €85.87 List Price €103.91
*TSP €43.80 *TSP €53.00
410D/11/MM
11 PIECE 1/2" Sq. Dr. DRAPEREXPERT HI-TORQ METRIC DEEPIMPACT SOCKET SET• Expert Quality• Contents: 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 and
32mm (6 point 78mm long)• Chrome vanadium steel hardened, tempered and
chemically blacked for corrosion protection
Stock No.37847EX. VAT INC VAT
List Price €112.80 List Price €136.49
*TSP €48.51 *TSP €58.70
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
71883 24 x 95mm long €28.92 €34.99 €16.15 €19.5471908 27 x 95mm long €28.92 €34.99 €16.15 €19.5471916 30 x 95mm long €28.92 €34.99 €16.15 €19.5471924 32 x 95mm long €32.09 €38.83 €17.98 €21.7611899 33 x 95mm long €32.47 €39.29 €17.98 €21.7671940 36 x 90mm long €34.42 €41.64 €19.15 €23.17
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
72188 150mm €31.22 €37.78 €29.25 €35.3912824 250mm €48.53 €58.72 €45.40 €54.93
Draper Tools is notresponsible for the contentof other companieswebsites
Poole PiratesDraper Tools are proud to sponsor the Poole Pirates inSpeedway’s Elite League.
The riders rely on theirmechanics,... their mechanicsuse and rely on Draper Tools
Go to the Poole Pirates website:
www.poolespeedway.net
for full information onPoole Speedway.
W2tools-1 EUR 9/9/11 12:16 Page 19
specialistautomotive socketry
Specialist Automotive SocketsThe table below shows the range of Draper Expert Quality specialist sockets, some sockets are impact and can be used with air or electric power tools
1
2
3 4 5 6 7 8 9 10 115 SIDEDSOCKET
1 3/8” 55540 DT-OXY €7.40 €8.95
2 1/2” 55993 410D-MM €3.75 €4.54
3 1/2” 39046 HTD-MM €6.25 €7.56
4 1/2” 71392 410D-MM €5.40 €6.53
5 1/2” 16216 HTD-MM €7.15 €8.65
6 1/2” 21833 HTD-MM €8.40 €10.16
7 1/2” 22192 HTD-MM €7.40 €8.95
8 1/2” 71393 410D-MM €7.15 €8.65
9 1/2” 35521 HTD-MM €6.90 €8.35
10 1/2” 39047 HTD-MM €7.80 €9.44
11 1/2” 26916 HTD-AF €14.15 €17.12
22MM 3/8” SQ. DR. OXYGEN SENSOR SOCKETExpert Quality, for oxygen sensors. Special slot in the side of socket for sensor wire clearance. Also suitable for diesel injectors foundin Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Manufactured from chrome vanadium steel hardened, tempered and chemicallyblacked for corrosion protection. List Price 11.69 ex. VAT/ 14.14 inc. VAT
12.5MM 1/2" SQ. DR. PENTAGON IMPACT SOCKETExpert Quality, five point (pentagon) impact socket for the bendix brakes on Citroën and Peugeot vehicles. Each side of the pentagonis 12.5mm. Forged from chrome molybdenum steel hardened, tempered and chemically blacked for corrosion protection.List Price 5.64 ex. VAT/ 6.82 inc. VAT
22MM 1/2" SQ. DR. DIESEL INJECTOR SOCKETExpert Quality, 6 point socket for the removal of diesel injectors fitted to GM (Vauxhall/Opel) Mitsubishi, Nissan and Volkswagenvehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price 10.13 ex. VAT/ 12.25 inc. VAT
26MM 1/2” SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked polished forcorrosion protection. For use on Audi and Volkswagen models. List Price 9.34 ex. VAT/ 11.30 inc. VAT
27MM 1/2" SQ. DR. DIESEL INJECTOR SOCKETExpert Quality, 6 point socket for the removal of M24 threaded injectors fitted to many car and light commercial diesel engines.Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. List Price 12.24 ex. VAT/ 14.81 inc. VAT
28MM 1/2" SQ. DR. HGV DIESEL INJECTOR SOCKETExpert Quality, 12 point socket for the removal of diesel injectors from HGV’s including Scania and Volvo. Forged from chromevanadium steel hardened, tempered, chrome plated and polished for corrosion protection. List Price 14.16 ex. VAT/ 17.13 inc. VAT
30MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality, 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot, Renault, Talbot andVolkswagen models. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection.List Price 12.36 ex. VAT/ 14.96 inc. VAT
30MM 1/2” SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 12 point socket forged from chrome vanadium steel hardened, tempered and chemically blacked polished forcorrosion protection. For use on Audi and Volkswagen models. List Price 11.23 ex. VAT/ 13.59 inc. VAT
32MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality, 6 point socket for hub nuts. Fits Audi, Citroën, Fiat, Ford, GM (Vauxhall/Opel), Lada, Peugeot, Renault, Talbot andVolkswagen models. Also driveshaft on Rover 200/400 models and Mercedes 7.5 tonne and over commercial vehicles. Forged fromchrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. List Price 11.98 ex. VAT/ 14.49 inc. VAT
35MM 1/2" SQ. DR. HUB NUT SOCKETExpert Quality, 6 point socket for hub nuts on Citroën BX, Xantia and Peugeot J7/J9 vehicles. Forged from chrome vanadium steelhardened, tempered, chrome plated and polished for corrosion protection. List Price 13.82 ex. VAT/ 16.73 inc. VAT
38MM 1.1/2"AF BALL JOINT SOCKETExpert Quality, 6 point socket designed specifically for use on ball joints of Rover Mini, Maxi, Allegro, BMC 11/1300. Also flywheelnuts on Rover allegro, Metro, Mini and BMC 11/1300. Forged from chrome vanadium steel hardened, tempered, chrome plated andpolished for corrosion protection. List Price 22.25 ex. VAT/ 26.92 inc. VAT
Sq. Stock Part TSP TSPDrive No. No. Description ex.VAT inc.VAT
An extensive choice of specialist sockets for the automotive industry...
When using any of the sockets shown in the table below, always refer tothe manufacturer’s service book or relevant Haynes manual for detailedand concise instructions on usage.
20
W2tools-1 EUR 15/9/11 12:41 Page 20
*Typical Selling Price - may vary in-store. 21
Specialist Automotive SocketsThe table below shows the range of Draper Expert Quality specialist sockets, some sockets are impact and can be used with air or electric power tools
24MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Ford and Mercedes up to 7.5 tonnes. List Price 28.92 ex. VAT/ 34.99 inc. VAT
27MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on DAF, Fiat Iveco, Renault, Volvo and Volkswagen vehicles. List Price 28.92 ex. VAT/ 34.99 inc. VAT
30MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For Bedford (3 ton) and Scammel vehicles. List Price 28.92 ex. VAT/ 34.99 inc. VAT
32MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Mercedes vehicles. List Price 32.09 ex. VAT/ 38.83 inc. VAT
33MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For use on Bedford (2 ton), Leyland, Scammel and Volvo wheel nuts. List Price 32.47 ex. VAT/ 39.29 inc. VAT
36MM 3/4" SQ. DR. HUB NUT IMPACT SOCKETExpert Quality, 6 point deep socket forged from chrome vanadium steel hardened, tempered and chemically blacked forcorrosion protection. For hub nuts on Alfa Romeo, Citroën, Fiat, Lancia, Peugeot, VW/Audi and Volvo clutches. Also clutcheson Vauxhall/Opel (GM) and crankshaft pulley nuts on most vehicles’ gearboxes and brakes on Saabs.List Price 34.42 ex. VAT/ 41.64 inc. VAT
41MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality, 6 point socket for the removal of hub nuts on Alfa Romeo, Citroën, Fiat and Ford Sierra Sapphire vehicles.Forged from chrome vanadium steel, hardened, tempered, chrome plated and polished for corrosion protection.List Price 17.26 ex. VAT/ 20.88 inc. VAT
56MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality, 12 point socket for the removal of hub nuts on Ford Transit vehicles 1993 onwards. Forged from chromevanadium steel hardened, tempered and polished for corrosion protection. List Price 25.66 ex. VAT/ 31.04 inc. VAT
65MM 3/4" SQ. DR. HUB NUT SOCKETExpert Quality, 12 point socket for the removal of hub nuts on Ford Transit Models 130, 150 and 190 - pre 1993 and rearhub nuts on Iveco vehicles. Forged from chrome vanadium steel hardened, tempered, chrome plated and polished forcorrosion protection. List Price 25.49 ex. VAT/ 30.84 inc. VAT
Sq. Stock Part TSP TSPDrive No. No. Description ex.VAT inc.VAT
1 3/4" 71883 411D-MM €16.15 €19.54
2 3/4" 71908 411D-MM €16.15 €19.54
3 3/4" 71916 411D-MM €16.15 €19.54
4 3/4'' 71924 411D-MM €17.98 €21.76
5 3/4" 11899 411D-MM €17.98 €21.76
6 3/4 71940 411D-MM €19.15 €23.17
7 3/4" 26669 TTD-MM €9.80 €11.86
8 3/4" 39048 TTD-MM €15.30 €18.51
9 3/4" 39049 TTD-MM €17.52 €21.20
21 3 4 5 6 7 8 9
SAFETY FIRST...Only black finish thick wall impact sockets specifically made for the purpose should beused with impact tools. Chrome plated or normal sockets are not designed to cope with thestresses involved and may shatter, resulting in personal injury. ✓✓✗✗
Air Impact Wrenches...For ultimate power and control whenusing these impact sockets, the onlychoice is Draper Expert Air ImpactWrenches - see pages 76-79 for somegreat offers on these lower noise lowvibration tools...
W2tools-2 EUR 15/9/11 12:46 Page 21
22
Stock No.04269EX. VAT INC VAT
List Price €198.00 List Price €239.58
*TSP €111.50 *TSP €134.92
Stock No.04278EX. VAT INC VAT
List Price €142.20 List Price €172.06
*TSP €83.98 *TSP €101.62
Stock No.04280EX. VAT INC VAT
List Price €107.94 List Price €130.61
*TSP €65.40 *TSP €79.13
DIS4
4 PIECE 1/2" Sq. Dr. DIESELINJECTOR SOCKET SET• Expert Quality• Contents: 22mm x 110mm long hexagon socket; 22mm
x 80mm long bi-hexagon socket; 27mm x 78mm longbi-hexagon socket; 28mm x 80mm long bi-hexagonsocket with side windows
• Chrome molybdenum steel hardened and tempered withblack phosphate finish
• Suitable for diesel injectors fitted to Alfa Romeo, Audi,BMW, Chrysler, Ford, GM (Vauxhall/Opel), Mercedes,Rover, Seat, Volkswagen and Volvo engines.
• Also suitable for MAN 2.5TD and Scania heavy goodsvehicles
Stock No.40103EX. VAT INC VAT
List Price €69.91 List Price €84.59
*TSP €37.45 *TSP €45.31
AWNSS/3
1/2" Sq. Dr. DRAPER EXPERTHI-TORQ WHEEL NUT SOCKETS FORALLOY WHEELS• Expert Quality• 3 x 6 point Draper Expert HI-TORQ sockets sizes 17, 19
and 21mm• Nylon sleeved to prevent damage to expensive alloy
rims
Stock No.59080EX. VAT INC VAT
List Price €43.25 List Price €52.33
*TSP €22.20 *TSP €26.86
LWN/DS4
4 PIECE 1/2" SQ. DR. WHEEL NUTDOUBLE SOCKET KIT• Expert Quality• 3 x double-ended impact sockets size 17, 19 and 21mm• One end is hexagon 6pt and the other a reverse conical
gripper thread for the removal of locking wheel nuts• Complete with a 1/2” sq. dr. 75mm impact extension bar
Stock No.09539EX. VAT INC VAT
List Price €72.43 List Price €87.64
*TSP €43.15 *TSP €52.21
LSS7
7 PIECE 3/8, 1/2" Sq. Dr. ‘LAMBDA’OR OXYGEN SENSOR SOCKET SET• Expert Quality• For removal, inspection or replacement of heated and
non-heated oxygen sensors fitted to the followingvehicle marques; Audi, BMW, Citroën, Mercedes,Peugeot, Renault, Skoda, Vauxhall/Opel (GM) andVolkswagen
• Cut-away sections allow some sockets to fit over wiringharnesses
• Selection of 3/8 and 1/2” ‘Lambda’ specific sockets
Stock No.89765EX. VAT INC VAT
List Price €85.10 List Price €102.98
*TSP €47.25 *TSP €57.17
HNISS5
5 PIECE 1/2" Sq. Dr. METRIC HUBNUT IMPACT SOCKET SET• Expert Quality• Contents: 30, 32, 34, 35 and 36mm 6 point sockets all
90mm long• Chrome molybdenum steel hardened and tempered and
chemically blacked• For use with high power 1/2” sq. dr. impact wrenches
Stock No.40158EX. VAT INC VAT
List Price €86.35 List Price €104.49
*TSP €46.50 *TSP €56.27
IHS6
6 PIECE 3/4" Sq. Dr. IMPACTSOCKET AND HEXAGONALBITS SET
• Expert Quality• Contents: Impact socket holder bit 3/4” sq. dr x
22mm hex.; 4 hexagonal impact bits size: 17, 19, 22and 24mm; hexagon key
• Bit holder has ball and groove for rings and pins• Chrome molybdenum hardened and tempered and
chemically blacked for corrosion protection
MH30
30 PIECE 1/2" Sq. Dr.HEXAGONAL SOCKET BIT SET
• Expert Quality• Contents: 9 hexagonal socket bits 5-19 x 55mm long;
8 hexagonal socket bits 5-13 x 100mm long; 7hexagonal socket bits 5-14 x 140mm long; 6hexagonal socket bits 5-12 x 200mm long
• Sockets forged from chrome vanadium steelhardened and tempered
• Bits from S2 steel with a chemically blacked finish forcorrosion protection
• Sockets have a half polished and half satin chromefinish
• Groove and two holes for retaining ring and pin
IBS16
16 PIECE 3/4", 1" Sq. Dr.IMPACT SOCKETS ANDBITS SET
• Expert Quality• Contents: Impact socket bit holder 3/4” sq. dr x
22mm hex.• Impact socket bit holder 1” sq. dr x 22mm hex.• 5 Draper TX-STAR impact bits size: T60, T70, T80,
T90 and T100• 4 hexagonal impact bits size: 17, 19, 22 and 24mm• 4 Draper TX-STAR impact sockets size: E18, E20, E22
and E24• Hexagon key (4mm)
• Only to be sold tobona fide garagesand emergencyserviceorganisations
W2tools-2 EUR 9/9/11 12:21 Page 22
*Typical Selling Price - may vary in-store. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc.Draper Expert HI-TORQ® is a registered trademark of Draper Tools Ltd. 23
651/5/MM
5 PIECE RATCHETING RINGSPANNER SET• Expert Quality• Contents: 6 x 8 - 19 x 22mm• Reversible ratchet ring
head in each end
Stock No.31991EX. VAT INC VAT
List Price €38.83 List Price €46.99
*TSP €20.95 *TSP €25.35
DRAPER EXPERT HI-TORQ METRIC FLEXIBLE HEADRATCHETING COMBINATION SPANNERS• Expert Quality• Flexible head allows movement
through 180°• Fine ratchet action, only 5°
movement to turn fastener -especially useful in confinedspaces
• Forged chrome vanadium steelhardened, tempered, chrome plated andfully polished throughout
Stock List Price List Price *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc. VAT
48621 8mm 140mm €21.19 €25.64 €18.98 €22.9748622 9mm 150mm €21.60 €26.14 €19.45 €23.5348623 10mm 160mm €21.86 €26.46 €19.75 €23.9048624 11mm 165mm €22.82 €27.62 €20.50 €24.8148625 12mm 170mm €23.81 €28.81 €21.45 €25.9548626 13mm 178mm €24.41 €29.53 €21.98 €26.6048627 14mm 190mm €25.66 €31.04 €22.98 €27.8148628 15mm 200mm €26.59 €32.18 €23.95 €28.9848629 16mm 210mm €28.56 €34.56 €25.75 €31.1648630 17mm 220mm €29.57 €35.78 €26.65 €32.2548631 18mm 235mm €31.25 €37.81 €28.15 €34.0648632 19mm 245mm €33.22 €40.19 €29.99 €36.2948633 21mm 284mm €41.42 €50.12 €37.25 €45.0748634 22mm 284mm €48.48 €58.66 €43.65 €52.8248635 24mm 324mm €55.80 €67.52 €50.25 €60.8048636 25mm 324mm €57.53 €69.61 €51.75 €62.62
DRAPER EXPERT HI-TORQ METRIC REVERSIBLERATCHETING COMBINATIONSPANNERS• Expert Quality• Fine ratchet action with
forward/reverse direction changeron ring end - only 5° movement to turnfastener, especially useful in confined spaces
• Chrome vanadium steel hardened, tempered,chrome plated and fully polished throughout
Stock List Price List Price *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc. VAT
48637 8mm 137mm €18.22 €22.04 €16.40 €19.8448638 9mm 143mm €18.22 €22.04 €16.40 €19.8448639 10mm 160mm €18.91 €22.88 €16.98 €20.5548640 11mm 165mm €19.49 €23.58 €17.50 €21.1848641 12mm 170mm €20.54 €24.86 €18.49 €22.3748642 13mm 178mm €21.22 €25.67 €18.98 €22.9748643 14mm 190mm €22.15 €26.80 €19.95 €24.1448644 15mm 200mm €23.14 €27.99 €20.85 €25.2348645 16mm 210mm €24.72 €29.91 €22.25 €26.9248646 17mm 220mm €25.61 €30.99 €22.98 €27.8148647 18mm 235mm €26.59 €32.18 €23.95 €28.9848648 19mm 245mm €28.63 €34.64 €25.75 €31.16
8228MM/10/A
10 PIECEDRAPER EXPERTHI-TORQ METRICRATCHETINGCOMBINATIONSPANNER SET• Expert Quality• Contents: 8 -19mm• 1/4” x 10mm hexagon
drive adaptor for usewith the 10mmratcheting spanner
• 3/8” sq. drive x 13mmhexagon adaptor for usewith the 13mmratcheting spanner
• Ratchet action only 5°movement to turn
• Chrome vanadium steelhardened, tempered,chrome plated and fullypolished throughout
Stock No.48721EX. VAT INC VAT
List Price €167.16 List Price €202.26
*TSP €72.00 *TSP €87.12
8228FMM/7/A
7 PIECE DRAPEREXPERT HI-TORQMETRIC FLEXIBLEHEAD RATCHETINGCOMBINATIONSPANNER SET• Expert Quality• Contents: 10 - 19mm• Flexible head allows
movement through 180°• Ratchet action, only 5°
movement to turn fastener,especially useful in confinedspaces
• Forged chrome vanadiumsteel hardened, tempered,chrome plated and fullypolished throughout
Stock No.48720EX. VAT INC VAT
List Price €184.70 List Price €223.49
*TSP €87.98 *TSP €106.45
8228RMM/12/A
12 PIECEDRAPER EXPERTHI-TORQ METRICREVERSIBLERATCHETINGCOMBINATIONSPANNER SET• Expert Quality• Contents: 8 - 19mm• Ratchet action with
forward/reversedirection changer onring end - only 5°movement to turnfastener, especiallyuseful in confinedspaces
• Forged chromevanadium steelhardened, tempered,chrome plated and fullypolished throughout
Stock No.48722EX. VAT INC VAT
List Price €262.78 List Price €317.96
*TSP €128.35 *TSP €155.30
Draper ExpertRatchetingSpanners
W2tools-2 EUR 9/9/11 12:21 Page 23
24
DRAPER EXPERT HI-TORQ METRIC COMBINATION SPANNERS• Expert Quality• Chrome vanadium steel hardened, tempered, chrome plated and fully polished throughout• Open ends set at 15°• Ring ends set at 15°
Stock List Price List Price *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc. VAT
54279 6mm 110mm €3.74 €4.53 €3.40 €4.1154280 7mm 120mm €3.98 €4.82 €3.60 €4.3654281 8mm 130mm €4.42 €5.34 €3.98 €4.8254282 9mm 135mm €4.56 €5.52 €4.10 €4.9754283 10mm 145mm €4.75 €5.75 €4.25 €5.1454284 11mm 152mm €5.04 €6.10 €4.50 €5.4554285 12mm 165mm €5.38 €6.50 €4.85 €5.8754286 13mm 175mm €5.62 €6.80 €4.98 €6.0354287 14mm 185mm €6.12 €7.41 €5.50 €6.6654288 15mm 200mm €6.91 €8.36 €6.25 €7.5654289 16mm 210mm €7.15 €8.65 €6.45 €7.8054290 17mm 225mm €8.04 €9.73 €7.25 €8.7754291 18mm 240mm €8.83 €10.69 €7.95 €9.6254292 19mm 250mm €9.12 €11.04 €8.25 €9.9854293 20mm 260mm €10.32 €12.49 €9.30 €11.2554294 21mm 275mm €10.42 €12.60 €9.40 €11.3754295 22mm 285mm €10.70 €12.95 €9.65 €11.6855679 23mm 305mm €12.41 €15.01 €11.20 €13.5554297 24mm 315mm €12.53 €15.16 €11.25 €13.6155680 25mm 325mm €15.02 €18.18 €13.50 €16.3455681 26mm 335mm €15.62 €18.91 €13.98 €16.9254300 27mm 350mm €15.91 €19.25 €14.35 €17.3655682 28mm 365mm €18.24 €22.07 €16.45 €19.9055683 29mm 370mm €20.23 €24.48 €18.20 €22.0254302 30mm 380mm €20.45 €24.74 €18.40 €22.2754303 32mm 395mm €24.62 €29.80 €22.15 €26.80
8224/12/MM
12 PIECE DRAPER EXPERT HI-TORQMETRIC COMBINATION SPANNER SET• Expert Quality• Contents: 8-22mm• Deep offset pattern• Draper Expert HI-TORQ ring ends cranked at 15°• Chrome vanadium steel hardened, tempered, chrome
plated and fully polished throughout
Stock No.64605EX. VAT INC VAT
List Price €46.54 List Price €56.31
*TSP €25.95 *TSP €31.40
7105/8/MM
8 PIECE DRAPER EXPERT HI-TORQDEEP OFFSET METRIC RINGSPANNER SET• Expert Quality• Contents: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x
17, 18 x 19 and 20 x 22mm• Draper Expert HI-TORQ ring end cranked at 15°• Supplied in wall-mountable plastic rack• Chrome vanadium steel hardened, tempered, chrome
plated and fully polished throughout
Stock No.64607EX. VAT INC VAT
List Price €49.46 List Price €59.85
*TSP €25.95 *TSP €31.40
8229/11/MM
11 PIECE DRAPER EXPERT HI-TORQMETRIC COMBINATION SPANNER SET• Expert Quality• Contents: 7 - 19mm• Draper Expert HI-TORQ ring ends cranked at 15°• Open ends set at 15°• Chrome vanadium steel hardened, tempered, chrome
plated and fully polished
Stock No.68234EX. VAT INC VAT
List Price €41.76 List Price €50.53
*TSP €21.50 *TSP €26.02
8235/25/MM
25 PIECE DRAPERHI-TORQ METRICCOMBINATIONSPANNER SET• Contents: 6-32mm• Chrome vanadium steel
hardened tempered andchrome plated
• Draper HI-TORQ ringends offset at 15°
• Open ends set at 15°• Supplied in wall
mountable plasticstorage rack
Stock No.26696EX. VAT INC VAT
List Price €112.18 List Price €135.73
*TSP €64.96 *TSP €78.60
Stock No.26697EX. VAT INC VAT
List Price €80.76 List Price €97.72
*TSP €47.27 *TSP €57.20
8235/6/MM
6 PIECE DRAPERHI-TORQ METRICCOMBINATIONSPANNER SET• Contents: 34-50mm• Chrome vanadium steel
hardened tempered andchrome plated
• Draper HI-TORQ ringends offset at 15°
• Open ends set at 15°• Supplied in wall
mountable plasticstorage rack
Stock No.26695EX. VAT INC VAT
List Price €145.01 List Price €175.46
*TSP €81.94 *TSP €99.15
8235/32
4 DRAPER HI-TORQ COMBINATIONSPANNER SETS• Contents: metric sets: 6-17mm & 10-15mm; AF sets
1/4-5/8” & 1/4-3/4”• Chrome vanadium steel
hardened tempered& chrome plated
• DraperHI-TORQring endsoffset at 15°
• Open endsset at 15°
• Supplied inwall mountableplastic storagerack
W2tools-2 EUR 9/9/11 12:21 Page 24
*Typical Selling Price - may vary in-store. Draper TX-STAR products are compatible with †Torx fixing systems. †Torx is the registered trademark of Camcar/Textron Inc. Draper Expert HI-TORQ® is aregistered trademark of Draper Tools Ltd. 25
D-CRF8
8 PIECE 3/8" Sq. Dr. METRIC CROW FOOTSPANNER SET ON RAIL• Expert Quality• Contents: 10 -22mm• For use in confined areas• Carbon steel hardened and tempered
with black phosphate finish
Stock No.61034EX. VAT INC VAT
List Price €37.58 List Price €45.48
*TSP €20.50 *TSP €24.81
HEAVY DUTY LONG PATTERNMETRIC COMBINATION SPANNERS• Polished bi-hexagon ring offset at 15º• Jaws offset at 15°• Chrome vanadium steel
hardened, tempered andchrome plated
Stock List Price List Price *TSP *TSPNo. Size Length ex. VAT Inc. VAT ex. VAT Inc. VAT
36954 33mm 460mm €24.62 €29.80 €22.25 €26.9236955 34mm 460mm €26.59 €32.18 €23.95 €28.9836956 36mm 495mm €34.22 €41.41 €30.90 €37.3936957 41mm 530mm €47.88 €57.93 €43.15 €52.2136958 46mm 595mm €64.46 €78.00 €57.98 €70.1636959 50mm 625mm €75.29 €91.10 €67.80 €82.04
ADJUSTABLE WRENCHES• Expert Quality• Crescent type wrenches manufactured from chrome
vanadium steel hardened and temperedwith black phosphate finish, polishedprofile and jaws.
• Jaws offset at 22°.• 150, 200, 250 and 300mm
sizes have a graduated scaleon the fixed jaws
• Suitable for use in areas wherechemicals and chrome plate can giveoff poisonous fumes
Stock List Price List Price *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
52679 150mm 24mm €15.84 €19.17 €8.35 €10.1052680 200mm 29mm €16.87 €20.42 €9.30 €11.2552681 250mm 33mm €23.74 €28.72 €12.60 €15.2552682 300mm 38mm €32.62 €39.47 €17.40 €21.0552683 375mm 45mm €59.35 €71.82 €30.50 €36.9152684 450mm 57mm €96.98 €117.35 €52.50 €63.53
ADJUSTABLEHOOK WRENCHES• Chrome vanadium steel, hardened,
tempered and chrome plated
Stock List Price List Price *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
68856 165mm 19-51mm €20.11 €24.34 €11.40 €13.7968857 205mm 32-76mm €28.99 €35.08 €16.75 €20.2769099 290mm 51-121mm €43.61 €52.77 €23.40 €28.31
SEC33
33 PIECE SECURITY BIT SET• Bit set and holder comprising a selection of 1/4” security bit types generally available
on the market• Contents:, 1/4”(F) x 1/4”(M) magnetic bit holder, 3 torq bits, 4 spanner bits, 4 tri-wing
bits, 12 hexagonal security bits and 9 Draper TX-STAR security bits
Stock No.38716EX. VAT INC VAT
List Price €14.69 List Price €17.77
*TSP €7.10 *TSP €8.59
SEC42B
42 PIECE SECURITYBIT SET• Expert Quality• Contents: driver with soft grip
handle and 1/4” magnetic bitholder, 1/4”(F) x 1/4”(M)magnetic bit holder, 3 tri-wingbits, 4 spanner bits, 5 XZNspline bits, 4 square bits, 12hexagonal security bits. 3Draper TX-STAR bits and 9Draper TX-STAR security bits
Stock No.03108EX. VAT INC VAT
List Price €26.38 List Price €31.91
*TSP €15.00 *TSP €18.15
security bit sets= plain slot
= cross slot
= PZ TYPE
= Draper TX-STAR
= Draper TX-STARtamperproof
= Hexagon
= XZN
= Square
= Spanner
= Hexagon Security
= Torq
= Tri-Winged
EXPLANATION OF SYMBOLS...
W2tools-2 EUR 9/9/11 12:22 Page 25
ultra accurate torque wrenches for professionals
Precision ManufacturedRatchet Head
Allowing Left or RightHand Operation Chrome
Plated Finish
LED
AdjustmentButtons
Accuracy ±4%
Draper Expert Qualityprofessional high accuracy ELECTRONIC Torque Wrenches
• Functions both clockwise and anti-clockwise • Electronic display shows Nm; ft-lb; in-lb and kg-cm with visualtorque applied lights together with overtorque buzzer • Nine pre-selectable torque levels for speed of operation
• Soft grip handle for user comfort • Manufactured and calibrated to ISO6789-1992-12-01 Standard
Stock No. 77990Downloadable data to PCvia RS232 interface
ETW6-30
1/4" Sq. Dr. ELECTRONIC PRECISION TORQUEWRENCH 6-30Nm• Expert Quality• Range 6-30Nm• Overall length
380mm
ETW27-135
3/8" Sq. Dr. ELECTRONIC PRECISIONTORQUE WRENCH 27-135Nm• Expert Quality• Range 27-135Nm• Overall length
415mm
ETW40-200
1/2" Sq. Dr. ELECTRONIC PRECISION TORQUEWRENCH 40-200Nm• Expert Quality • Range 40-200Nm • Overall length 525mm
ETW68-340
1/2" Sq. Dr. ELECTRONIC PRECISION TORQUE WRENCH68-340Nm WITH RS232 AND USB INTERFACE• Expert Quality • Range 68-340Nm • 250 data memory points with PC
connectivity for data download - software included • Data connection cable withRS232 and USB connectors • Overall length 650mm
26
Stock No.77991EX. VAT INC VAT
List Price €289.06 List Price €349.76
*TSP €155.95 *TSP €188.70
Stock No.77992EX. VAT INC VAT
List Price €311.21 List Price €376.56
*TSP €167.95 *TSP €203.22
Stock No.77993EX. VAT INC VAT
List Price €361.63 List Price €437.57
*TSP €188.95 *TSP €228.63
Stock No.77990EX. VAT INC VAT
List Price €458.81 List Price €555.16
*TSP €221.95 *TSP €268.56
ATG
1/2" Sq. Dr. TORQUE SETTINGANGULAR GAUGE• Expert Quality• Designed to be used with any 1/2” sq. drive torque
wrench• Rotating index line allows operator to accurately tighten
fixing to manufacturer’s exact specification• Supplied with fully adjustable reaction arm
Stock No.40099EX. VAT INC VAT
List Price €22.73 List Price €27.50
*TSP €10.75 *TSP €13.01
ATG34
3/4" Sq. Dr. TORQUE SETTINGANGULAR GAUGE
• Expert Quality• Designed to be used with any 3/4” sq. drive tool• Rotating arrow head allows operator to
accurately tighten fixing to manufacturer’sexact specification
• Supplied with fully adjustable reaction arm
Stock No.04466EX. VAT INC VAT
List Price €71.98 List Price €87.09
*TSP €45.50 *TSP €55.06
W2tools-2 EUR 9/9/11 12:22 Page 26
*Typical Selling Price - may vary in-store. 27
EPTW5-22
3/8" Sq. Dr.PRECISION TORQUEWRENCH 5-22Nm• Expert Quality• Marked range 5-22Nm
Stock No.58130EX. VAT INC VAT
List Price €184.87 List Price €223.70
*TSP €73.15 *TSP €88.51
EPTW30-100
1/2" Sq. Dr.PRECISION TORQUEWRENCH 30-100Nm• Expert Quality• Marked range 30-100Nm
Stock No.58138EX. VAT INC VAT
List Price €236.88 List Price €286.62
*TSP €95.95 *TSP €116.10
EPTW50-180
1/2" Sq. Dr.PRECISION TORQUEWRENCH 50-180Nm• Expert Quality• Marked range 50-180Nm
Stock No.58139
EX. VAT INC VATList Price €269.57 List Price €326.18
*TSP €114.00 *TSP €137.94
EPTW70-230
1/2" Sq. Dr.PRECISION TORQUEWRENCH 70-230Nm• Expert Quality• Marked range 70-230Nm
Stock No.58140
EX. VAT INC VATList Price €294.14 List Price €355.91
*TSP €129.95 *TSP €157.24
EPTW120-400
3/4" Sq. Dr.PRECISIONTORQUEWRENCH120-400Nm• Expert Quality• Marked range 120-400Nm
Stock No.64673
EX. VAT INC VATList Price €543.14 List Price €657.20
*TSP €220.80 *TSP €267.17
3004A
3/8" Sq. Dr. TORQUE WRENCH10-80Nm • Marked range 10-80Nm/88.5-708lb-in• Reversible ratchet head• Micrometer-type sleeve allows accurate pre-set torque
values to be set• Calibration certificate included
Stock No.34570EX. VAT INC VAT
List Price €58.03 List Price €70.22
*TSP €28.20 *TSP €34.12
3001A
1/2" Sq. Dr. TORQUE WRENCH30-210Nm• Marked range 30-210Nm/22.1-154.9lb-ft• Reversible ratchet head• Micrometer-type sleeve allows
accurate pre-set torque valuesto be set
• Calibration certificate included
Stock No.30357EX. VAT INC VAT
List Price €58.78 List Price €71.12
*TSP €31.53 *TSP €38.15
3005A
3/4" Sq. Dr. TORQUE WRENCH65-450Nm• Marked range: 65-450Nm/51.6-29.1lb-ft• Reversible ratchet head• Micrometer-type sleeve allows
accurate pre-set torque valuesto be set
• Calibration certificate included
Stock No.34964EX. VAT INC VAT
List Price €188.14 List Price €227.64
*TSP €102.00 *TSP €123.42
Draper Expert Qualityprofessional high accuracy Torque Wrenches• Manufactured and calibrated to ISO6789-1992-12-01 Standard• Locking pre-set action • Reversible ratchet head
Precision ManufacturedRevolving Head Allowing Left
or Right Hand Operation
Satin ChromeFinish
TorqueCalibration
Window
MicrometerAdjustmentand Torque
Setting Lock
ultra accurate torque wrenchesfor professionals
Accuracy ±4%
W2tools-2 EUR 9/9/11 12:22 Page 27
28
BC15ACO
12V BATTERY CHARGER WITHCONSTANT OUTPUT MODE ANDSULPHATION FACILITY• Expert Quality• Constant power supply programme 12V/15A• Starts charging batteries when showing only 1V• Maintenance charge switching• Patented battery recovery system• Charges 35 - 110Ah batteries
Stock No.45373EX. VAT INC VAT
List Price €390.60 List Price €472.63
*TSP €348.00 *TSP €421.08
BC30
12V/24V 20A BATTERY CHARGER• Polarity protected• Charging voltage output 12-24V• Effective charging current 30A• Av charging current (EN60335) 20A• Thermal overload protection• Dimensions: 200 x 190 x 270mm
Stock No.40177EX. VAT INC VAT
List Price €162.17 List Price €196.22
*TSP €132.02 *TSP €159.74
BC22A
12V/24V AUTOMATIC BATTERYCHARGER• Suitable for conventional lead acid, lead calcium,
maintenance-free lead calcium and gel filled batteries• Fully automatic with continuous adjustment of
unsupervised charging• Polarity protection• Charging voltage output 12-24V• Effective charging current 22A (12V)• Av charging current (EN60335) 20A (12V)• Thermal overload protection• Dimensions: 360 x 260 x 140mm
Stock No.43941EX. VAT INC VAT
List Price €245.69 List Price €297.28
*TSP €222.00 *TSP €268.62
BC14
12V/24V 12A BATTERY CHARGER• Polarity protected• Charging voltage output 12-24V• Av charging current (EN60335): 10A• 2 charging steps• Thermal overload protection• Dimensions: 200 x 190 x 270mm
Stock No.40176EX. VAT INC VAT
List Price €89.28 List Price €108.03
*TSP €81.78 *TSP €98.95
BCS350T
12V/24V 300A BATTERYSTARTER/CHARGER WITH TROLLEY• Manufactured to EN60335 and EN55014 Standards• Polarity protected• Charging voltage output 12-24V• Charging output (EN60335) 20A• Cranking current (EN60335) 220A• Thermal overload protection• Dimensions: 400 x 300 x 640mm
Stock No.40180EX. VAT INC VAT
List Price €286.73 List Price €346.94
*TSP €256.82 *TSP €310.75
BatteryChargers& Testers
ThermalOverloadProtection
CopperWindings
Wheel kit
SYMBOLS
Ammeter
PolarityInversionProtected
Fast Charge Remote Starter Battery Timer
CarryingHandle
BCS600T
12V/24V 500A BATTERYSTARTER/CHARGER WITH TROLLEY• For garage and workshop use • Trolley wheels for
easy movement around the workshop or yard• Thermal overload protection, an easy-to-read
ammeter, battery timer, polarity inversion andtransport handle • Manufactured to CE Directives,EN60335 and EN55014 Standards
• Charging voltage output 12-24V• Dimensions: 450 x 320 x 700mm
Stock No.40181EX. VAT INC VAT
List Price €441.58 List Price €534.31
*TSP €390.00 *TSP €471.90
16A Supplyrequired
W2tools-2 EUR 9/9/11 12:22 Page 28
*Typical Selling Price - may vary in-store. 29
Stock No.40179EX. VAT INC VAT
List Price €200.18 List Price €242.22
*TSP €189.63 *TSP €229.45
Stock No.40178EX. VAT INC VAT
List Price €136.80 List Price €165.53
*TSP €120.00 *TSP €145.20
Stock No.66801EX. VAT INC VAT
List Price €92.21 List Price €111.57
*TSP €84.01 *TSP €101.65
BCI
12V INTELLIGENT BATTERYCHARGER• Suitable for conventional lead acid, maintenance-free
and absorbent glass matt (AGM) and gel filled batteries• 6A charge setting• Fully automatic with temperature sensor compensation
and continuousadjustment of unsupervised charging
• Maintains battery in a 100% fully charged state • LED charging status display• Thermal overload safety protection• Charging output 12V • Audible polarity protection• Dimensions: 184 x 112 x 86mm
Stock No.66806EX. VAT INC VAT
List Price €61.75 List Price €74.72
*TSP €55.21 *TSP €66.80
BC12
12V 12A BATTERY CHARGER &TESTER• Suitable for conventional lead acid batteries ONLY• Fast 12A charge setting • LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging output 12V• Polarity protection• Dimensions: 200 x 135 x 85mm• Weight: 2.5kg
Stock No.66798EX. VAT INC VAT
List Price €51.36 List Price €62.15
*TSP €46.82 *TSP €56.65
BC8A
12V 8A AUTOMATIC BATTERYCHARGER & TESTER• Automatically reverts to safe trickle mode when battery
fully charged thus maintaining a fully-charged battery• Suitable for conventional and maintenance-free lead
acid batteries ONLY• Intermittent 8A charge setting• LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging output 12V• Dimensions: 184 x 112 x 86mm• Weight: 2.1kg
Stock No.66800EX. VAT INC VAT
List Price €44.78 List Price €54.19
*TSP €42.00 *TSP €50.82
BCS230
12V/24V 230A BATTERYSTARTER/CHARGER• Polarity protected• Charging voltage output 12-24V• Charging output effective 20A• Cranking current (EN60335) 150A• Thermal overload protection• Dimensions: 200 x 190 x 270mm
BCS150
12V 135A BATTERYSTARTER/CHARGER• Polarity protected• Charging voltage output 12V• Charging output (EN60335) 18A• Cranking current (EN60335) 12A• Thermal overload protection• Dimensions: 200 x 190 x 210mm
BCS60
12V 60A BATTERYCHARGER/STARTER & TESTER• Heavy duty 60A engine start facility• Suitable for conventional lead acid batteries ONLY• Fast 26A charge setting• LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging output 12V• Polarity protection• Dimensions: 250 x 150 x 135mm
SAFETY INFORMATION...Lead acid batteries contain diluted sulphuric acid as theelectrolyte - ALWAYS wear eye protection and protectiveclothing when moving, charging or servicing.While charging,batteries give off hydrogen and oxygen - a very explosivemixture - so DO NOT expose them to electric sparks, nakedflames and definitely NO SMOKING!
W2tools-2 EUR 9/9/11 12:22 Page 29
30
BC6
12V 6A BATTERY CHARGER &TESTER• Suitable for conventional lead acid batteries ONLY• Fast 6A charge setting• LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging output 12V• Polarity protection
Stock No.66799EX. VAT INC VAT
List Price €34.25 List Price €41.44
*TSP €33.02 *TSP €39.95
BC5
6V/12V 4.5A BATTERY CHARGER &TESTER• Suitable for conventional lead acid batteries ONLY• LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging outputs 6/12V• Polarity protection
Stock No.66802EX. VAT INC VAT
List Price €35.57 List Price €43.04
*TSP €32.40 *TSP €39.20
BC4
12V 4.5A BATTERY CHARGER &TESTER• Suitable for conventional lead acid batteries ONLY• 4.5A charge setting• LED battery condition tester• LED charging status display• Thermal overload safety protection• Charging output 12V• Polarity protection
Stock No.72848EX. VAT INC VAT
List Price €33.07 List Price €40.02
*TSP €30.00 *TSP €36.30
PP12/24PRO
12/24V 2400A HEAVY DUTYPOWER PACK• Expert Quality• Ideal for automotive, light commercial, HGV, marine,
agricultural and construction equipment• Capable of starting 12V and 24V petrol engines up to
8000cc, 12V diesel engines up to 4000cc, 24V dieselengines and up to 14,000cc
• Marine diesel engines - 12V 3000cc and 24V 8000cc• Twin aerospace quality solid lead, maintenance-free
29Ah batteries• Three stage integral charging system means battery will
recharge from 50% discharge in only five hours• Reverse polarity and anti-surge protected with heavy
duty battery isolator switch. and reverse polarityindicators
• 2M heavy duty booster cables with insulated jaws• Weight 27kg
Stock No.45015EX. VAT INC VAT
List Price €1917.10 List Price €2319.69
*TSP €958.80 *TSP €1160.15
PP12/PRO
12V 1600A HEAVY DUTYPOWER PACK• Expert Quality• Ideal for vehicle dealerships, car sales outlets etc• Capable of starting 12V petrol engines up to 3500cc
and 12V diesel engines up to 1900cc• Uses a 16A/h sealed dry lead acid battery (maintenance
free)• Reverse polarity and anti-surge protected with heavy
duty battery isolator switch and reverse polarityindicators
Stock No.45016EX. VAT INC VAT
List Price €689.81 List Price €834.67
*TSP €339.00 *TSP €410.19
PP12VB/HD
12V 900A HEAVY DUTY PORTABLEPOWER PACK• Versatile power pack ideal for petrol vehicles up to
3000cc and diesel vehicles up to 2400cc• On/off power switch, voltmeter with battery charge,
anti-surge protection reverse polarity indicators• Heavy duty booster cables with insulated jaws• DC power socket allows the running of 12V/DC
accessories to a maximum current of 15A• Rechargeable through a 230V AC supply or a 12V
vehicle cigarette lighter socket• Conforms to EN60335-2-29:1997 & EN61000-61:2001
Stock No.40133EX. VAT INC VAT
List Price €209.50 List Price €253.49
*TSP €119.83 *TSP €145.00
BLT100
100A BATTERYLOAD TESTER• For testing 6 and 12V lead
acid batteries, chargingand starting circuits foundon most motorcycles, cars,light commercial vehicles,tractors, boats etc
• Up to 100A load test • Tests: state of charge,
cranking ability, chargingsystem output and startermotor
Stock No.53090EX. VAT INC VAT
List Price €103.70 List Price €125.48
*TSP €40.00 *TSP €48.40
BH-2
BATTERY HYDROMETER• Measures battery electrolyte density• Range: 1.15-1.30 g/ml• Glass tube, PVC bulb and spout
Stock No.61792 1.15 - 1.30g/mlEX. VAT INC VAT
List Price €7.78 List Price €9.41
*TSP €5.10 *TSP €6.17
• 2M heavy dutybooster cables withinsulated jaws
• Rechargeablethrough 12V vehiclecigarette lightersocket or 230V ACsupply
W2tools-2 EUR 9/9/11 12:22 Page 30
*Typical Selling Price - may vary in-store. 31
HEAVY DUTY BATTERYBOOSTER CABLES• Expert Quality• Manufactured to BSAU 237a• Suitable for 12V and 24V
systems on car andlight commercialvehicles
• 25mm2 dia.full coppercable fittedwith insulatedclamps
JL163M HEAVY DUTY BATTERYBOOSTER CABLES• Expert Quality• Manufactured to
BSAU 237a
Stock No.51874EX. VAT INC VAT
List Price €65.33 List Price €79.05
*TSP €35.95 *TSP €43.50
JL102M BATTERY BOOSTER CABLES• Suitable for 12V systems on car and light commercial
vehicles• 10mm2 dia. full copper
cable fitted with fullyinsulated clamps
Stock No.51945EX. VAT INC VAT
List Price €37.13 List Price €44.92
*TSP €19.50 *TSP €23.60
FTB3RIGID TOWING BRACE• Maximum rated load 2000kg • Length between hooks - 1800mm• Supplied in storage bag
with ON TOW sign
Stock No.88621EX. VAT INC VAT
List Price €51.96 List Price €62.87
*TSP €23.51 *TSP €28.45
3.7M TOW ROPES• Manufactured to BSAU 187 Specifications• Complete with ‘ON TOW” sign and warning flag
Stock List Price List Price *TSP *TSPNo. Colour Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
63410 Yellow 2000kg €11.78 €14.26 €7.80 €9.4465297 Red 4000kg €23.50 €28.43 €15.00 €18.15
TR2500A4.27M CONCERTINA TOW ROPE• Sixteen strand polyethylene with safety hooks and lock • Manufactured in accordance with BSAU187
Stock No.67256EX. VAT INC VAT
List Price €18.43 List Price €22.30
*TSP €12.52 *TSP €15.15
GREEN STEELFUEL CANS• Green - normally recognised as the
colour code for unleaded fuels.
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
49957 5L €36.60 €44.29 €21.95 €26.5649952 10L €46.13 €55.81 €26.95 €32.6149949 20L €52.42 €63.42 €31.50 €38.1249946 Spout €17.02 €20.59 €12.75 €15.43
BLACK STEELFUEL CANS• Black - normally recognised as the
colour code for diesel fuels.
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
49956 5L €36.60 €44.29 €21.95 €26.5649954 10L €46.13 €55.81 €26.95 €32.6149948 20L €52.42 €63.42 €31.50 €38.1249945 Spout €17.02 €20.59 €12.75 €15.43
RED STEELFUEL CANS• Red - normally recognised as the
colour code for leaded fuels.
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
49955 5L €36.60 €44.29 €21.95 €26.5649953 10L €46.13 €55.81 €26.95 €32.6149951 20L €52.42 €63.42 €31.50 €38.1249947 Spout €17.02 €20.59 €12.75 €15.43
All the fuel cans are available with coloured fuel delivery spouts.These are purchased separately from the can.
See the individual table for ordering information.
UNLEADEDFUEL
LEADEDFUEL
DIESELFUEL
steel fuel cansPatented cap locking system keeps the contents secure.Manufactured from high strength 0.9mm sheet steel.Bayonet cap closure device ensures can is leakproof inany position.Wide channel breather for smooth,“noglug” steady pouring. For flammable liquids only.
• Suitable for 12Vand 24V systemson car and lightcommercial vehiclesup to 2000cc
• 16mm2 dia. full coppercable fitted with insulated clamps
Stock No.51875 3MEX. VAT INC VAT
List Price €79.68 List Price €96.41
*TSP €44.01 *TSP €53.25Stock No.54600 5M
EX. VAT INC VATList Price €123.98 List Price €150.02
*TSP €69.01 *TSP €83.50emergency & breakdown
W2tools-2 EUR 9/9/11 12:23 Page 31
bodywork andwindscreen toolsAs with every Draper product, these carefully selectedbodywork and windscreen tools are designed andmanufactured to high standards and are fullyguaranteed - that’s the Draper difference!
32
SH/KITSLIDE HAMMER KIT• For use in garage or workshop• Blow force from slide hammer removes stubborn
objects
Stock No.52321EX. VAT INC VAT
List Price €61.70 List Price €74.66
*TSP €31.95 *TSP €38.66
PWAP88 PIECE PULLEY AND WIPER ARMPULLER KIT• Expert Quality• For the simple removal of pulley wheels and wiper arms• Compatible with wiper arms with integrated screenwash
nozzles• Suitable for front and rear wipers• Contents: Slide hammer; Pressure puller screw adaptor
with end cap and bearing and six puller adaptors forAudi/VW, BMW, Ford, GM (Vauxhall/Opel), Mercedesand Peugeot
Stock No.43795EX. VAT INC VAT
List Price €198.84 List Price €240.60
*TSP €95.95 *TSP €116.10
WNTVEHICLE WASHER JET CLEANINGTOOL• Expert Quality• Knurled body with pocket clip, needle point one end and
scriber point on the other• For cleaning and repositioning of vehicle washer jets• Supplied with end caps to prevent personal injury when
not in use• Length: 95mm
Stock No.03322EX. VAT INC VAT
List Price €6.60 List Price €7.99
*TSP €4.50 *TSP €5.45
176DOOR PANEL REMOVAL TOOL• For break-free removal of door panel clips fitted to
many vehicles
Stock No.19193EX. VAT INC VAT
List Price €6.60 List Price €7.99
*TSP €3.90 *TSP €4.72
ITK11 PIECE TRIM REMOVAL KIT• Expert Quality• For the removal and manipulation of interior trims i.e.
door panels, dashboard fascias, trim strips and othersimilar applications in the automotive, marine andaviation industries
• Comprises 11 non-marking special nylon tools thatfulfil specific requirements
• Supplied in a nylon 11 compartment tool roll withhook and loop fixing
SCDP1SUCTION CUP/DENT PULLER• Suction pad diameter - 118mm• Closing handle creates suction• Maximum capacity 20kg., safe working load (SWL) 10kg• Ideal for pulling out minor dents in automotive body
panels• Solid suction
pad preventsdamage topanel paintwork
Stock No.69187EX. VAT INC VAT
List Price €6.12 List Price €7.41
*TSP €3.90 *TSP €4.72
SUC2TWIN SUCTION LIFTER• Expert Quality• For the easy lifting of smooth flat surface materials, i.e.
glass, marble etc.• Suction cups 123mm diameter• Maximum lift 50kg; safe working load (S.W.L.) 25kg• Manufactured from high density aluminium alloy
Stock No.69723EX. VAT INC VAT
List Price €59.33 List Price €71.79
*TSP €30.00 *TSP €36.30
WINDOW SCRAPER• Expert Quality• Stainless steel with resin handle• Particularly useful for
bonded windscreens
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
65543 Scraper €19.68 €23.81 €11.95 €14.4665545 12 blades €5.78 €7.00 €4.20 €5.08
WST6WINDSCREENWIPER ARMREMOVAL TOOL• Expert Quality• For the safe and efficient
removal of windscreenwiper arms
• Avoids damage to vehiclebodywork or wiperassembly
Stock No.71462EX. VAT INC VAT
List Price €19.22 List Price €23.26
*TSP €10.75 *TSP €13.01
Stock No.09542EX. VAT INC VAT
List Price €69.19 List Price €83.72
*TSP €37.80 *TSP €45.74
W2tools-2 EUR 9/9/11 12:23 Page 32
*Typical Selling Price - may vary in-store. 33
BPR7A7mm BRAKE PAD KEY WITH HANDLE• Expert Quality• Chrome vanadium steel key hardened and tempered
with a chemically blacked finish• Suitable for various brake pad replacement applications
on BMW, Ford andVW/Audi vehicles
• Handlelength 140mm
Stock No.68425EX. VAT INC VAT
List Price €4.58 List Price €5.55
*TSP €2.90 *TSP €3.51
BAW-FN10 x 11mm FLARE NUT WRENCH• For use on compression nuts fitted on petrol, diesel
injection pipes and hydraulic gas or refrigerationsystems
• Manufactured from chrome vanadium steel hardened,tempered and chrome platedfor corrosion protection
Stock No.31967EX. VAT INC VAT
List Price €5.52 List Price €6.68
*TSP €3.30 *TSP €3.99
BRAKE ADJUSTINGWRENCHES
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
07200 1/4 x 5/16” AF sq. €4.61 €5.58 €3.00 €3.6312329 1/4 x 11/32” AF sq. €4.61 €5.58 €3.00 €3.63
TC163-22mm MINI TUBING CUTTER• Adjustable, for small bore pipes or in-situ applications
where space is limited• Two flare groove rollers and deburring reamer in
adjusting knob
Stock No.10579EX. VAT INC VAT
List Price €11.66 List Price €14.11
*TSP €7.50 *TSP €9.08
CWT21/2" Sq. Dr. BRAKE CALIPER PISTONRETRACTION TOOL• Expert Quality• For use on opposed and single piston sliding calipers
Ensures parallel pistonretraction, thus avoidingdamage to piston seals
Stock No.52335EX. VAT INC VAT
List Price €37.92 List Price €45.88
*TSP €23.95 *TSP €28.98
CWBT1818 PIECE BRAKE PISTON WINDBACK TOOL KIT• Expert Quality• Left handed and
right handedwinders allow theeasy return of thebrake piston intothe caliper toprovide clearancefor new brakepads
• Fits mostvehicles
CWBT3939 PIECE BRAKE PISTON WINDBACK TOOL KIT• Expert Quality• Left handed and
right handedwinders allow theeasy return of thebrake piston intothe caliper toprovide clearancefor new brakepads
• Fits mostvehicles
• Now alsoincludes pinpunches,brake keys,pentagon bitandsockets
Stock No.40141EX. VAT INC VAT
List Price €124.42 List Price €150.54
*TSP €69.01 *TSP €83.50
Stock No.09554EX. VAT INC VAT
List Price €248.93 List Price €301.20
*TSP €125.00 *TSP €151.25
BPF/PRO/KITBRAKE PIPE FLARING TOOL KIT• Expert Quality • For single and double lap flares in
soft copper, steel and stainless steel brake pipes •Quick change split die blocks for rapid set up withsliding yoke and quick lift die block clamp • Eight wayrotating forming die with 5mm, 6mm, 3/16” SAE, 1/4”SAE, 3/8” SAE and 5/16” SAE split die blocks
Stock No.49447EX. VAT INC VAT
List Price €389.28 List Price €471.03
*TSP €209.95 *TSP €254.04
BPTG8BRAKE LINING THICKNESS GUIDE• Expert Quality • Contents: red 2 and 3mm; yellow 4,5 and 6mm; green 8, 10 and 12mm • For quicklychecking remaining life of brake linings • Three bladecolours signify wear; red for replace now, yellow forreplace soon and green for OK• Marked inmetric withimperialequivalents
Stock No.30819EX. VAT INC VAT
List Price €19.63 List Price €23.75
*TSP €11.95 *TSP €14.46
brakes!a selection of quality brake toolsfor the workshop...
• Chrome vanadium steelhardened, tempered andchrome plated forcorrosion protection
• Length 175mm
W2tools-2 EUR 9/9/11 12:23 Page 33
34
179ABS BRAKE SERVICING TOOL• Suitable for Ford Granada (all models post 1985); Ford
Sierra (all ABS fitted models) and Rover 800 (allmodels)
• To wind back the brake pistons on ABS brakes
Stock No.22349EX. VAT INC VAT
List Price €18.79 List Price €22.74
*TSP €10.75 *TSP €13.01
394HYDRAULIC BRAKE HOSE CLAMP• Designed as a single-handed snap action tool for
clamping off hydraulic hoses when working onbraking systems
Stock No.11534EX. VAT INC VAT
List Price €6.86 List Price €8.31
*TSP €4.20 *TSP €5.08
HBSP1230mm HANDBRAKE SPRING PLIERS• Expert Quality• Spring-loaded pliers with grooves cut into ends to
accept handbrake spring cable andcircular recess to holdhandbrake return spring
Stock No.89820EX. VAT INC VAT
List Price €28.30 List Price €34.24
*TSP €16.75 *TSP €20.27
BFE1PNEUMATIC BRAKEFLUID EXTRACTOR
Stock No.77056EX. VAT INC VAT
List Price €131.69 List Price €159.34
*TSP €63.00 *TSP €76.23
OE1PNEUMATIC OILEXTRACTION/BRAKEBLEEDING KIT
Stock No.73291EX. VAT INC VAT
List Price €192.19 List Price €232.55
*TSP €95.95 *TSP €116.10
BBK3APNEUMATIC UNIVERSAL BRAKE BLEEDING KIT• Expert Quality• One person hand-
operated kit that allowsfluid to be drawn fromthe bleed nippleallowing either bleedingor full replacement ofsystem on cars, vans,trucks and motor bikes
• Supplied withreservoir top-up kit
• Requires air supply:70-120psi (4.8-8.3bar)
Stock No.71205EX. VAT INC VAT
List Price €75.12 List Price €90.90
*TSP €37.80 *TSP €45.74
BFT212V ELECTRONICBRAKE FLUID TESTER• Expert Quality• Uses boiling point detection
on DOT3, DOT4 and DOT5.1brake fluid to ascertainwhen it requiresreplacement through watercontamination
• Pipette and reservoir for useon small systems, for examplemotorcycles
• Can be used on most types of vehicleincluding motorcycles
• Runs off 12V car battery and suppliedwith crocodile clips and 1.7M of cable
Stock No.41392EX. VAT INC VAT
List Price €422.90 List Price €511.71
*TSP €221.95 *TSP €268.56
• Expert Quality• Ideal for one person
operation• For the extraction of brake
fluid from hydraulic systems- especially those withcomplex ABS systems usinga compressed air supply
• Supplied with 1.5Mof metal sprung suctiontube and three extractionstraws including a doubleadaptor suitable for twindisc motorcycles
• Expert Quality• For the extraction of engine
oils from motor vehicles,motor bikes, marineengines, generators etc.without the removal of theoil drain plug
• Ideal for one personoperation
• Supplied with 1.4M of anti-kink hose, 4 x siphon hosesand brake bleedinghose/connector
brake bleeding & oil extraction
W2tools-2 EUR 9/9/11 12:23 Page 34
*Typical Selling Price - may vary in-store. 35
EWS-2FPM2L FPM SPRAYER• Expert Quality• High quality virgin plastic with FPM seals which allow
for use with: solvents, fuel, acids, scale removers,waterproofing, anti-mould solutions, oils and lubricants
• Container is graduated in 200ml increments up to itsactual capacity of 1.8L which allows for airpressurization of sprayer
• Adjustable spray pattern• Overall height excluding handle 190mm
Stock No.02709EX. VAT INC VAT
List Price €28.37 List Price €34.33
*TSP €16.78 *TSP €20.30
EWS-7-FPM7L FPM PUMP SPRAYER• Expert Quality• High quality virgin plastic with FPM seals which allow
for use with: solvents, fuel, acids, scale removers,waterproofing, anti-mouldsolutions, oils andlubricants
• Container is graduated in 1Lincrements up to its actualcapacity of 5.5L whichallows for air pressurizationof sprayer
• Safety valve prevents overpressurization
• 600mm long lancewith adjustable spraypattern and 1.5M(approx.) of reinforceddelivery tube
• Adjustable shoulderstrap
• Overall heightexcluding handle390mm
Stock No.02708EX. VAT INC VAT
List Price €94.80 List Price €114.71
*TSP €51.50 *TSP €62.32
FHW3636mm THERMO-VISCOUSFAN NUT WRENCH• For the removal of thermo-viscous fans fitted to Ford
and GM (Vauxhall/Opel) vehicles only
Stock No.52582EX. VAT INC VAT
List Price €9.29 List Price €11.24
*TSP €5.95 *TSP €7.20
FHW3232mm THERMO-VISCOUSFAN NUT WRENCH• For the removal of thermo-viscous fans fitted to Ford
and BMW vehicles only
Stock No.52581EX. VAT INC VAT
List Price €9.29 List Price €11.24
*TSP €5.95 *TSP €7.20
NCAKA17 PIECE UNIVERSAL CLUTCHALIGNING KIT• For fast accurate alignment of flywheel pilot hole and
clutch drive plate when assembling to car• For use on most cars and light commercial vehicles
CAV1UNIVERSAL COOLING SYSTEMVACUUM PURGE AND REFILL KIT• Expert Quality• Dramatically reduces cooling system refill time by
preventing thus avoiding time-consuming coolingsystem bleeding.
• Plugs into air line then attaches to the cooling systemto create a vacuum.
• Filler hose is then connected allowing pre-mixedcoolant to flow easily into the system
• Supplied complete with screw adaptor and gauge,1.3M of clear hose, four adaptors and hose end filler
RTP1RADIATOR PRESSURE TEST KIT• Expert Quality • For pressure testing radiators of
most popular vehicles • 20 custom adaptors allowdirect connection to radiator or expansion tank • Handpump with gauge allows simple and easy controlledsystem pressurization via a quick coupling system •Pressure release pin allows system to bedepressurized prior to detachment
Stock No.39223EX. VAT INC VAT
List Price €28.99 List Price €35.08
*TSP €16.75 *TSP €20.27
Stock No.14455EX. VAT INC VAT
List Price €268.49 List Price €324.87
*TSP €149.40 *TSP €180.77
Stock No.09544EX. VAT INC VAT
List Price €117.19 List Price €141.80
*TSP €70.75 *TSP €85.61
Draper Tools has been chosen as thepreferred supplier to the mechanics
working on Santa Pod’sown show vehicles and
the engineers at “the pod”who use Draper Tools in
their day-to-daymaintenance of the track
and estate.
IDEAL FORBRAKE
CLEANINGFLUIDS
IDEAL FOR BRAKECLEANING FLUIDS
W2tools-2 EUR 9/9/11 12:23 Page 35
Stock No.50024EX. VAT INC VAT
List Price €56.33 List Price €68.16
*TSP €31.53 *TSP €38.15
Stock No.61023EX. VAT INC VAT
List Price €105.38 List Price €127.51
*TSP €53.43 *TSP €64.65
DMM5DIGITAL AUTOMOTIVE ANALYSER• Expert Quality • 24 position rotary function and rangeselector • Measures DC volts and DC amps • Measuresresistance and dwell angle • Takes tachometer readings• Diode test facility • Audible continuity tester • Impactresistant rubber case • Recessed input terminals • Lowbattery indicator • Test leads (probes and crocodile clips• Dimensions 70 x 147 x 39mm • PP3 battery supplied
Specification:DC amps ... 10ADC volts ... 200mV, 2, 20, 200 and 1000VResistance (Ohms) ... 200, 2k ,20k, 200k, 2M & 20M Tachometer (x10rpm) ... 500-10,000 Dwell angle ... 3 cyl. 0-120°: 4 cyl. 0-90°
5 cyl. 0-120°: 6 cyl. 0-60°8 cyl. 0-45°
Weight: ... 189g
DMM14DIGITAL AUTORANGINGAUTOMOTIVE ANALYSER• Expert Quality • Measures AC/DC volts and amps •Measures resistance and dwell angle • Measures dutycycle and frequency • Diode test facility • Audiblecontinuity tester • Temperature sensor • Impact resistantrubber case • Recessed inputterminals • Low battery indicator• Dimensions 910 x 189 x 32mm• PP3 battery supplied
Specification:DC volts ... 320mV, 3.2, 32, 320 & 1000VAC volts ... 3.23232 and 750VDC current ... 320µ and 3200µA, 33mA
320mA and 10AAC current ... 320µ and 3200µA, 33mA
320mA and 10AResistance (Ohms) ... 320, 3.2, 32k, 3.2M and 32M Tachometer (x10rpm) ... RPM4 600-3200
RPM2 300-3200Dwell angle ... 3 cyl. 0-120°; 4 cyl. 0-90°
5 cyl. 0-72°; 6 cyl. 0-60°8 cyl. 0-45°
Duty cycle ... 1 - 90%Frequency ... 320Hz, 3200Hz and 32KHzTemperature range ... -20 to 750°C & -4 to 1400°FWeight: ... 280g (analyser only)
36
HCDHOSE CLIP DRIVER• Expert Quality• Flexible shaft with 6 x 7mm hexagon
adaptor to tighten and undo hose clips• Blade length: 150mm
Stock No.56945EX. VAT INC VAT
List Price €10.20 List Price €12.34
*TSP €5.10 *TSP €6.17
HCP2180mm CLIC AND CLIC-R HOSECLAMP TOOL• Expert Quality• Used to release and refit reusable hose clips• For releasing and refitting clic and
clic-R type metal hose clipsfitted to most engines
• Spring loaded forgedhandles with PVCdipped grips
Stock No.89791EX. VAT INC VAT
List Price €31.51 List Price €38.13
*TSP €15.50 *TSP €18.76
RHCP1230mm FLEXIBLE RATCHETHOSE CLAMP PLIERS• Expert Quality• For the removal and replacement of metal or plastic
spring-loaded self-tightening hose clamps• Ideal for working in confined engine bays• Flexible long reach mechanism allows the pliers to
release and lock hose clamps in the opened position• Fitted with 700mm long cable• For clamp diameters from 18mm to 54mm (approx.)
Stock No.89793EX. VAT INC VAT
List Price €66.65 List Price €80.64
*TSP €36.00 *TSP €43.56
fault finding equipmentA selection of fault finding and diagnostic equipment ideal forgarages and workshops. Finished to high standards and fullyguaranteed - that’s the Draper difference!
W2tools-2 EUR 9/9/11 12:23 Page 36
*Typical Selling Price - may vary in-store. 37
AFT-2ANTI-FREEZE TESTER• For testing ethylene glycol coolant (anti-freeze) density• Range: -5° to -40°C• Glass tube, PVC bulb and spout
Stock No.61794 -5 to -40°CEX. VAT INC VAT
List Price €7.39 List Price €8.94
*TSP €4.75 *TSP €5.75
12-48V FUSE BLADEAUTOMOTIVE AMPERAGETESTERS• Expert Quality• For rapid and accurate amperage testing• 12-48V/20A AC/DC measuring range.• Liquid Crystal Display screen shows readings• Plugs directly into fuse socket recess• Supplied with cable 750mm long• Uses 12V-A23 battery (supplied)
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
43060 3mm €27.14 €32.84 €16.20 €19.6043062 5mm €27.14 €32.84 €16.20 €19.60
SFTAUTO FUSE TESTER ANDREMOVER
• Expert Quality• Checks continuity of blade-type automotive fuses by
inserting pins into fuse• Fuses can be removed by using integral spring clip• LED illuminates if fuse OK
Stock No.04312EX. VAT INC VAT
List Price €9.00 List Price €10.89
*TSP €6.30 *TSP €7.62
11706-24V AUTOMOTIVE CIRCUIT TESTER• Expert Quality• Testing range 6-24V DC only• Solid brass body housing a test light• Insulation piercing contact point with protective
screw cap
Stock No.12579EX. VAT INC VAT
List Price €6.05 List Price €7.32
*TSP €3.60 *TSP €4.36
11816-24V HEAVY DUTY AUTOMOTIVECIRCUIT TESTER• Expert Quality• Low voltage tension circuit tester with insulated blade
170mm long• Testing range 6-24V DC only• 3.5M approx. (stretched)
of recoil lead andheavy duty earth(crocodile) clip
Stock No.56498EX. VAT INC VAT
List Price €27.72 List Price €33.54
*TSP €17.10 *TSP €20.69
1176BATTERY AND ALTERNATORANALYSER• For testing 12V DC systems only• Checks battery charge level and alternator output level• 880mm of insulated cable with test probe and earth
(crocodile) clip
Stock No.36584EX. VAT INC VAT
List Price €17.52 List Price €21.20
*TSP €10.75 *TSP €13.01
SI15/12VA12V DC 15W SOLDERING IRON• Fitted with car cigarette lighter type plug• Ideal for automotive and model makers
Stock No.71422EX. VAT INC VAT
List Price €10.58 List Price €12.81
*TSP €5.95 *TSP €7.20
Warning: For testing DCcircuits on vehicles within the voltage
range only. Not suitable for testingmains supply AC circuits
Warning: For testing DCcircuits on vehicles within the voltage
range only. Not suitable for testingmains supply AC circuits
W2tools-2 EUR 9/9/11 12:23 Page 37
38
TL3PISTOL-GRIP XENON TIMING LIGHT• Suitable for checking ignition timing on automotive,
agricultural and marine engines• Bright Xenon tube
for ‘all lighting’ use• Not for use with
motor cycles
Stock No.52616EX. VAT INC VAT
List Price €59.95 List Price €72.54
*TSP €25.83 *TSP €31.25
FCR-EOBD2EOBD2 DIGITAL ENGINE FAULT CODEREADER• Expert Quality• For use on vehicles post 2001 petrol and post 2004
diesel with EOBD compliant engines to diagnose andextinguish engine warning lights
• Supports J1850 VPW/PWM, ISO9141, KW2000 andCAN (including extended CAN) protocols.
• Reads engine fault codes and extract freeze frame datawithin 25 seconds
• Pre-loaded with over 22,000 code definitions includinggeneric and manufacturers specific codes in its memory
• Memory can be accessed to identify DTC problemswithout connection to vehicle
• Simple engine codeeraser with auto link andmemory feature.
• Supplied with CD ROMand RS232 interfacecable 1.5M long to allowdownload to PC forpresentation of data plusEOBD connection cable
• Zip up soft storage caseto protect product
Stock No.43913EX. VAT INC VAT
List Price €533.40 List Price €645.41
*TSP €209.91 *TSP €253.99
CAM5FLEXI INSPECTION CAMERA WITHPAL VIDEO OUT CONNECTION AND10mm dia. CAMERA PROBE• State-of-the-art camera with a 2.4” TFT LCD colour
viewing screen and 1M flexible probe with a 10mmdiameter camera head illuminated by six high powerLED’s
• Gives a high resolution picture of areas that are difficultto see with the naked eye - i.e. inside of cylinderchambers, vehicle door spaces, corrosion checks andmany other uses in the automotive workshop
• PAL video-out connection cable allows real-time viewingor video recording
• Powered by four AA batteries(supplied separately)
Stock No.13828EX. VAT INC VAT
List Price €188.98 List Price €228.66
*TSP €161.98 *TSP €195.99
RRTK1818 PIECE CAR RADIOREMOVAL KIT• Expert Quality• Selection of keys to allow the
bona fide removal of carradios by garages, emergencyservices and specialist caraudio installers
• Supplied in plastic wallet
Stock No.89792EX. VAT INC VAT
List Price €35.54 List Price €43.01
*TSP €19.15 *TSP €23.17
PCT17 PIECE PETROL ENGINECOMPRESSION TEST KIT• Expert Quality• Suits most petrol engined vehicles• Scale measures 0-290psi/0-20bar• Pressure release valve for repetitive tests
Stock No.43051EX. VAT INC VAT
List Price €187.54 List Price €226.92
*TSP €99.98 *TSP €120.98
DCT512 PIECE DIESEL ENGINECOMPRESSION TEST KIT• Expert Quality• For the accurate testing of compression in direct and
indirect car and van diesel engines• Large easy-to-read scale measuring
0-1000psi/0-70kg/cm2
• 600mm of flexible hose and push on adaptorincorporating a Schrader one way valve
• Side pressure relief valve allows rapid retesting.• Selection of glowplug adaptors, adaptors and seals
Stock No.43052EX. VAT INC VAT
List Price €284.30 List Price €344.01
*TSP €159.00 *TSP €192.39
DCT6CV13 PIECE COMMERCIAL VEHICLEDIESEL ENGINE COMPRESSION TESTKIT• Expert Quality• For the accurate testing of compression in direct and
indirect commercial diesel engines• Large easy-to-read scale measuring 0-1000psi/0-
70kg/cm2
• 600mm of flexible hose and push on adaptorincorporating a Schrader one way valve
• Side pressure relief valve allows rapid retesting.• Selection of glowplug adaptors, adaptors and seals
Stock No.43053EX. VAT INC VAT
List Price €259.27 List Price €313.72
*TSP €142.80 *TSP €172.79
These kits should only be sold to bona fide garages,emergency services and specialist car audio installers
W2tools-2 EUR 9/9/11 12:23 Page 38
*Typical Selling Price - may vary in-store. 39
VAC1AVACUUM TEST KIT• Expert Quality• Vacuum gauge and comprehensive accessory kit• Identifies faults in vehicle’s fuel, ignition, ignition
transmission and emission systems• Applications include fuel, ignition, ignition transmission,
air conditioning, fuel lines, emissions, vacuum brakeand clutch bleeding
Specification:Piston stroke volume ... 1 cubic inchRange ... 0 - 76cm Hg of vacuum
Stock No.68714EX. VAT INC VAT
List Price €111.62 List Price €135.07
*TSP €57.50 *TSP €69.58
CRDIFK-2ADIESEL FLOW & ADAPTORS KIT• Expert Quality• Comprehensive kit for performing the simple test to
determine return flow from the diesel injectors• Quickly indicates faulty or damaged injectors when
cranking or running engine• External flowmeters allow measurement of return flow
for speedy diagnosis.• Capable of measuring six injectors simultaneosly• Supplied with adaptor connectors to allow safe coupling
up of flow measuring kit to common rail diesel injectors
Stock No.49445EX. VAT INC VAT
List Price €222.46 List Price €269.17
*TSP €124.80 *TSP €151.01
GPSK6 PIECE 3/8” SQ. DR. DIESEL GLOWPLUG SERVICE KIT• Expert QualityContents: three glow plug removal sockets; glow plug
removal tool with collet; two glow plug reaming tools• For the removal and maintenance of glow plugs in most
popular diesel engines• Comprises three glow plug sockets, glow plug removal
tool and two reamers for the removal of accumulatedcarbon in the glow plug chamber
Stock No.09541EX. VAT INC VAT
List Price €144.84 List Price €175.26
*TSP €76.80 *TSP €92.93
DISC66 PIECE DIESEL INJECTOR SEATCUTTER SET• Expert Quality• Contents: T bar handle assembly; pilot guide; 4 reamers
to suit most popular vehicles/injector makes• For cleaning and re-cutting of diesel injector seats in
cylinder head
Stock No.30823EX. VAT INC VAT
List Price €105.34 List Price €127.46
*TSP €53.99 *TSP €65.33
DPTDIESEL PRIMING PUMP• Expert Quality• For priming diesel fuel lines, filters and pumps• Hand bulb with one way valve and
in-line fuel connectors
Stock No.43986EX. VAT INC VAT
List Price €34.22 List Price €41.41
*TSP €16.75 *TSP €20.27
DTK-MULTI113 PIECE DIESEL AND PETROLENGINE TIMING KIT• For use on Audi, Citroën, Peugeot, Rover, Volkswagen
and Volvo petrol and diesel engined cars and lightcommercial vehicles
Stock No.57629EX. VAT INC VAT
List Price €38.42 List Price €46.49
*TSP €22.75 *TSP €27.53
DIP3DIESEL INJECTOR PULLER • Expert Quality• Contents: 1.8kg slide hammer with 460mm shaft; puller
adaptor with M16 thread; puller claw to grip injector• For the removal of siezed diesel injectors on Mercedes-
Benz CDi 611, 612 and 613 engines and othermanufacturers similar engines
Stock No.31231EX. VAT INC VAT
List Price €131.62 List Price €159.26
*TSP €71.95 *TSP €87.06
petrol/dieselengineservicetools
W2tools-2 EUR 9/9/11 12:23 Page 39
40
AS1CYLINDER HEAD COMPONENT HEADSTORAGE RACK• Expert Quality• Integral trays to accept two camshafts and all associated
valves, springs, rockers, collets etc.• When used correctly the various components can be
stored in the trays in thecorrect order for easyreassembly
• Can also stackwhen full
Stock No.76948EX. VAT INC VAT
List Price €100.13 List Price €121.15
*TSP €55.80 *TSP €67.52
CLT-K16ROVER GROUP CAMSHAFTLOCKING TOOL• Locks camshaft when changing cam belts etc.• For use with Rover Group Metro 1.4 (100 Series)
GTa, GTi May 1990 on; Rover 214 16 valve Si, SLi,GSi Oct. 1989 on; Rover 414 16 valve Si, SLi, GSiMarch 1990 on.
• Anodized aluminium.
Stock No.52306
FLT1-UNIUNIVERSAL FLYWHEEL LOCKINGTOOL• Expert Quality• Adjustable both axially and radially• Can be adapted by user to suit most vehicles by use of
own bolts
Stock No.30830EX. VAT INC VAT
List Price €65.83 List Price €79.66
*TSP €35.99 *TSP €43.55
UBTT1UNIVERSAL BELT TENSION TESTER• Expert Quality• Measures the tension on drive belts on various
serpentine andcamshaftbeltthicknesses
Stock No.43058EX. VAT INC VAT
List Price €112.56 List Price €136.20
*TSP €59.95 *TSP €72.54
SPARK PLUG WRENCHES• Swivel wrenches with plastic coated T handle• Rubber insert for spark plug insulator
protection and retention
Stock List Price List Price *TSP *TSPNo. Plug Size ex. VAT Inc. VAT ex. VAT Inc. VAT
13867 10mm €7.06 €8.54 €4.20 €5.0813868 14mm €7.06 €8.54 €4.20 €5.08
300mm LONG REACH SPARKPLUG WRENCHES• For use with spark plugs which are deep set
into engine blocks• Socket end has rubber insert for spark plug
insulator protection and retention
Stock List Price List Price *TSP *TSPNo. Plug Size ex. VAT Inc. VAT ex. VAT Inc. VAT
12242 10mm €6.05 €7.32 €3.90 €4.7212243 14mm €6.05 €7.32 €3.90 €4.72
MDK10 PIECE MASTER FUEL AND AIR CONDITIONINGDISCONNECTION SET
• Expert Quality• For de-coupling automotive heater/air conditioning hoses and fuel lines.• Offset design with spring-loaded action allowing one-handed operation.• Suitable for a wide variety of vehicles.• Colour coded for easy recognition
Stock No.03324EX. VAT INC VAT
List Price €45.60 List Price €55.18
*TSP €28.20 *TSP €34.12
• Adjustable dual scalegraduations readable fromfront and back of tool
• Knurled aluminium rotatingknob for easy setting
• Overall size:400 x 400 x 220mm
EX. VAT INC VATList Price €4.46 List Price €5.40
*TSP €2.99 *TSP €3.62
W2tools-2 EUR 9/9/11 12:23 Page 40
*Typical Selling Price - may vary in-store. 41
STETH1
MECHANICS STETHOSCOPE• Suitable for detecting and pinpointing faults in engines,
bearings and other moving parts• Supplied with two probes 290mm long
Stock No.54503EX. VAT INC VAT
List Price €22.06 List Price €26.69
*TSP €11.95 *TSP €14.46
SBSK15
15 PIECE SERPENTINE BELT SERVICEKIT• Expert Quality• For the removal and maintenance of polyrib serpentine
belts used on engine drive systems• Tackles the restricted working space encountered in this
area of the engine compartment• Ratchet head for ease of use
Stock No.40446EX. VAT INC VAT
List Price €83.42 List Price €100.94
*TSP €43.20 *TSP €52.27
9902/P
VALVE GRINDING KIT• Recycled PVC shaft 240mm long with 19mm and
22mm diameter rubber suction end• Pots of genuine carborundum
fine and coarse paste
Stock No.72891EX. VAT INC VAT
List Price €10.90 List Price €13.18
*TSP €5.99 *TSP €7.25
51-177mmCYLINDER HONE• For cylinders on engines
51-177mm capacity• Can also be used with electric
or air drills• Max. speed: 2400r/min• Supplied with 180 grit stone set• Spare stones available
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
56246 Cylinder Hone €39.07 €47.28 €22.20 €26.8656248 Stone Set - 280 grit €16.82 €20.36 €10.75 €13.0156249 Stone Set - 180 grit €16.82 €20.36 €10.75 €13.0156250 Stone Set - 120 grit €16.82 €20.36 €10.75 €13.01
25-57mmCYLINDER HONE• For cylinders on small bore engines
25-57mm capacity• Can also be used with electric
or air drills• Max. speed: 2400r/min• Supplied with 220 grit stone set• Spare stones available
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
56244 Cylinder Hone €14.09 €17.05 €8.35 €10.1056247 Stone Set 220 grit €7.37 €8.92 €4.50 €5.45
LRRS
3 PIECE LIGHT AND RAINSENSOR REMOVAL KIT
• Expert Quality• For the removal of windscreen mounted rain and light
sensors in around 90% of vehicles on the market
Stock No.04377EX. VAT INC VAT
List Price €39.00 List Price €47.19
*TSP €23.99 *TSP €29.03
GSGT
GASKET SPLITTING TOOL ANDCLEANING KIT
• Expert Quality• Designed to split housings along a gasket joint when
using lever bars would damage the joint.• 15 abrasive pads supplied to clean joint prior to
reassembly• Brass and steel blade (supplied) for use with different
housing materials
Stock No.04468EX. VAT INC VAT
List Price €59.88 List Price €72.45
*TSP €34.75 *TSP €42.05
cylinderhones
W2tools-3 EUR 15/9/11 12:51 Page 41
42
PISTON RING COMPRESSORS• Compresses piston rings to prevent breakage on assembly• Spring steel with steel adjusting key
Stock List Price List Price *TSP *TSPNo. Capacity Depth ex. VAT Inc. VAT ex. VAT Inc. VAT
51844 45-75mm 50mm €14.45 €17.48 €6.60 €7.9951845 60-100mm 75mm €19.03 €23.03 €9.30 €11.2551846 75-140mm 75mm €22.90 €27.70 €10.20 €12.3451847 70-150mm 100mm €23.76 €28.75 €11.50 €13.92
CHS2
2 PIECE CYLINDER HEADSTAND KIT• Expert Quality• Securely supports cylinder heads
for most forms of service andrepair applications
• Heavy duty mild steel with zincplated finish
Stock No.89767EX. VAT INC VAT
List Price €32.02 List Price €38.74
*TSP €20.35 *TSP €24.62
VSC9
60-155mm VALVE SPRINGCOMPRESSOR• Expert Quality,• Throat depth 160mm
Stock No.02339EX. VAT INC VAT
List Price €43.14 List Price €52.20
*TSP €26.95 *TSP €32.61
VSC10
68-130mm VALVE SPRINGCOMPRESSOR• Expert Quality,• Throat depth 160mm
Stock No.02342EX. VAT INC VAT
List Price €34.20 List Price €41.38
*TSP €19.75 *TSP €23.90
VALVE SPRING COMPRESSORS• Expert Quality• For use on multi-valve and diesel engines with
deep seated valves and on many OHC/OHVpetrol/ diesel engines
Stock List Price List Price *TSP *TSPNo. Capacity Depth ex. VAT Inc. VAT ex. VAT Inc. VAT
02325 35-142mm 160mm €82.97 €100.39 €46.25 €55.9602338 35-200mm 250mm €98.11 €118.72 €53.40 €64.61
VSC11
55-175mm UNIVERSAL VALVESPRING COMPRESSOR• Expert Quality• Suitable for use on most engines due to
double-ended valve cup• Throat depth 165mm
Stock No.02713EX. VAT INC VAT
List Price €81.67 List Price €98.82
*TSP €46.50 *TSP €56.27
VSC7
132mm MULTI-WAYVALVE SPRINGCOMPRESSOR• Expert Quality• Variable assembly design
allows use of this tool onmost cylinder headsincluding motorcycles,small plant machinery andmarine engines
• Includes five valve cupspressure winding handleand accessories
• Capacity: 180mm; throatdepth 110mm
Stock No.30832EX. VAT INC VAT
List Price €65.74 List Price €79.54
*TSP €35.95 *TSP €43.50
valve spring compressorsprofessional quality compressors with plastic coated locking handles.When locked on they keep valvesprings positively compressed during maintenance work.
VSC/UNI
UNIVERSAL VALVE SPRINGCOMPRESSOR• Suitable for OHC and OHV petrol and diesel engines• Allows valve guide rubbers to be removed/replaced
without the need to remove the head• Supplied with valve holder, quick-release air couplings
and valve stem installer/remover
Stock No.59085EX. VAT INC VAT
List Price €145.66 List Price €176.24
*TSP €78.00 *TSP €94.38
Unique double action levercams action provide
choice of operation eitherabove or below valve
W2tools-3 EUR 9/9/11 12:30 Page 42
*Typical Selling Price - may vary in-store. 43
FTS2
110-170mm FUEL SENDER SPANNER• Expert Quality• For the removal and replacement of the retaining ring
on fuel tank sender units• 25mm drive bolt with 55mm long arms
Stock No.43844EX. VAT INC VAT
List Price €25.61 List Price €30.99
*TSP €15.00 *TSP €18.15
FTS3
75-160mm FUEL SENDER SPANNER• Expert Quality• For the removal and replacement of the retaining ring
on fuel tank sender units• 25mm drive bolt with 55mm long arms
Stock No.43845EX. VAT INC VAT
List Price €26.93 List Price €32.58
*TSP €15.54 *TSP €18.80
4617
10 BLADE METRIC FEELER GAUGESET• Contents: 0.05-0.080mm• 100mm long taper blades,
hardened and polishedfor long accurate life
Stock No.73988EX. VAT INC VAT
List Price €3.60 List Price €4.36
*TSP €2.60 *TSP €3.15
4616
10 BLADE IMPERIAL FEELER GAUGESET
Stock No.73970EX. VAT INC VAT
List Price €3.60 List Price €4.36
*TSP €2.60 *TSP €3.15
SPRT/KIT
7 PIECE THREAD REPAIR(RECOVERY) TOOL KIT
• Expert Quality• Contents: M8 x 1.00mm; M10 x 1.00mm;
M12 x 1.25mm; M14 x 1.25mm; M12 x 1.25mm;M14 x 1.25mm; M18 x 1.50mm
• For the repair of threads in (for example) spark plugs• Allows thread repair from the bottom (not the top)• Satin chrome plated tool steel hardened and
tempered
Stock No.04480EX. VAT INC VAT
List Price €214.80 List Price €259.91
*TSP €129.30 *TSP €156.45
CAT247
CORROSION ASSESSMENT TOOL• Expert Quality• Combination tapping hammer, blunt scraper and short
lever for checking corrosion levels in bodywork, panelsand chassis
• Suitable for use in MOT bays• Length: 140mm
Stock No.69721EX. VAT INC VAT
List Price €15.34 List Price €18.56
*TSP €9.55 *TSP €11.56
NC922
3 PIECE NUT SPLITTER SET• For the safe removal of corroded or damaged nuts
without damaging bolt threads• Capacities: 9-12mm;
12-16mm and 16-22mm
Stock No.55108EX. VAT INC VAT
List Price €32.11 List Price €38.86
*TSP €19.15 *TSP €23.17
EXTC
280mm EXHAUST PIPE CUTTER• Expert Quality• Cuts exhaust pipes 35-64mm diameter, up to 3mm
thickness• The complete cut can be made in just a quarter of a
turn making this tool ideal for working in confinedspaces under vehicles
Stock No.40100EX. VAT INC VAT
List Price €47.78 List Price €57.82
*TSP €26.35 *TSP €31.88
178A
GASKET SCRAPER• For cleaning cylinder heads, removing
old sealants and carbon, etc.
Stock No.36923EX. VAT INC VAT
List Price €8.98 List Price €10.86
*TSP €5.70 *TSP €6.90
• Contents: 0.0015-0.025”• 100mm long taper blades, hardened and polished for
long accurate life
feelergauges
W2tools-3 EUR 9/9/11 12:30 Page 43
44
5SR SET
5 PIECE SCRAPER AND REMOVERSET• Suitable for a variety of applications including removing
cotter pins, radiator hoses, flaking paint and gaskets
Stock No.35100EX. VAT INC VAT
List Price €31.18 List Price €37.72
*TSP €17.40 *TSP €21.05
SSS3
3 PIECE STAINLESS STEEL SCRAPERSET• Expert Quality• Contents: scrapers 10 x 165mm; 15 x 170mm
and 22 x 175mm long• 1.5mm thick stainless steel
blades with lacqueredwood handles
Stock No.30824EX. VAT INC VAT
List Price €26.21 List Price €31.71
*TSP €15.50 *TSP €18.76
MPH SET
4 PIECE MINI HOOK AND PICK SET• Designed to ease the removal of ‘O’ rings, split pins,
seals and bushes in various automotive applications• Contents: Awl, Clevis - pin remover, ‘L’ and ‘V’ hooks
Stock No.35099EX. VAT INC VAT
List Price €12.53 List Price €15.16
*TSP €7.98 *TSP €9.66
ORP2
O RING AND SEAL PULLER• Universal seal puller for use on
rubber ‘O’ rings, oil andgrease seals
Stock No.37439EX. VAT INC VAT
List Price €9.48 List Price €11.47
*TSP €5.70 *TSP €6.90
OSP3
3 PIECE O-RING AND SEAL PULLERKIT• Expert Quality• Contents:150mm long needle tip o-ring pick; 115mm
T-handle seal pick and puller; 165mm T-handle sealpick and puller
Stock No.24772EX. VAT INC VAT
List Price €23.35 List Price €28.26
*TSP €14.35 *TSP €17.36
PB/SET
4 PIECE PRY BAR SET• Contents: 200, 300, 450 and
600mm long• Chemically blacked finish blades
with PVC handles
Stock No.35396EX. VAT INC VAT
List Price €29.74 List Price €35.98
*TSP €13.51 *TSP €16.35
MPT/2
LARGE MAGNETIC PARTS TRAY• For storage of nuts, bolts, screws etc whilst working• Covered magnetic base for affixing to metal objects
such as vehicle bodywork, tool boxes etc Magnetismtransfers to inner surface of tray to retain small metalparts, nuts, bolts etc.
• Size: 230 x 140mm
Stock No.56332EX. VAT INC VAT
List Price €12.29 List Price €14.87
*TSP €7.50 *TSP €9.08
MPT15
MAGNETIC STAINLESS STEEL MESHPARTS BOWL• For storage of nuts, bolts, screws etc whilst working• Covered magnetic base for affixing to metal objects suchas vehicle bodywork, tool boxes etc. • Magnetismtransfers to inner surface of tray to retain small metalparts, nuts, bolts etc. • Stainless steel mesh constructionallows use in water-based cleaning tanks for small partswashing/degreasing • Diameter: 270mm
Stock No.31317EX. VAT INC VAT
List Price €16.46 List Price €19.92
*TSP €9.50 *TSP €11.50
5360
100-470mm TELESCOPIC MAGNETICPICK-UP TOOL• A fully extendable pick-up tool with magnetic end -
Ideal for the retrieval of nuts screws and objects lost inremote places
Stock No.33080EX. VAT INC VAT
List Price €7.27 List Price €8.80
*TSP €4.75 *TSP €5.75
5350
610mm PICK-UP TOOL• Fully flexible plated stem with claw action pick-up end,
controlled from spring-loaded grip
Stock No.39669EX. VAT INC VAT
List Price €5.50 List Price €6.65
*TSP €3.00 *TSP €3.63
M302
470mm FLEXIBLE SHAFTINSPECTION MIRROR• Fully flexible shaft and fixed head with mirror 55mm,
diameter to give good visibility in concealed areas• Length: 470mm
Stock No.11954EX. VAT INC VAT
List Price €11.28 List Price €13.65
*TSP €6.60 *TSP €7.99
W2tools-3 EUR 14/9/11 14:21 Page 44
motorcycle maintenance toolsThis range covers generalmotorcycle repairs which can becarried out by the professionalor competent home mechanic.
Watch out during 2011 formore tools we will be addingto this range.
*Typical Selling Price - may vary in-store. 45
CWB/MC
MOTORCYCLE BRAKE PISTON TOOL• Expert Quality• For the simple and controlled retraction
of hydraulic brake pistonswhen replacingfront or rearbrake pads
Stock No.30826EX. VAT INC VAT
List Price €79.01 List Price €95.60
*TSP €43.51 *TSP €52.65
MCT
MOTORCYCLE CHAIN TENSIONER• Expert Quality, holds chain ends at correct distance
apart when replacing split link• Suitable for most chain sizes including 425, 520, 528
and 530
Stock No.30827EX. VAT INC VAT
List Price €21.74 List Price €26.31
*TSP €13.80 *TSP €16.70
MOTORCYCLE OIL FILTER WRENCHES• Expert Quality• Flexible steel band to securely clamp filter• Design allows easy access to restricted area.• Driven by 3/8” square drive recess
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
30829 71-79mm €9.19 €11.12 €5.37 €6.5030828 87-95mm €9.89 €11.96 €5.95 €7.20
MCSK4
MOTORCYCLE SPINDLE KEY• Expert Quality,• For the removal of hollow wheel spindles• Hexagon sizes on tool: 17, 19, 22, 24mm with internal
3/8” square drive in the19mm hex end
Stock No.30831EX. VAT INC VAT
List Price €25.46 List Price €30.81
*TSP €14.34 *TSP €17.35
CCK
MOTORCYCLECHAIN CLEANING KIT• For cleaning of motorcyclechains whilst in-situ• Comprises bottle for holdingcleaning fluid, plastic tube, Ypiece adaptor and chain bathwith cleaning brushes• Easy set up; bath isclamped over chainand the bottleconnected tobath via plastictubes and chaincleaned
MWS
MOTORCYCLE WHEEL SPINNER• For manual spinning of motorcycle wheels during
routine maintenance• Wheel sits in cradle and it can be rotated whilst
motorcycle is stationary• Rubber insert in base to stabilize unit when using
Stock No.30837EX. VAT INC VAT
List Price €40.92 List Price €49.51
*TSP €22.73 *TSP €27.50
MBPP1
240mm MOTORCYCLE BRAKEPISTON PLIERS• Expert Quality• For the removal of siezed pistons without damaging
outer piston surface• Capacity: 19-36mm dia.• Knurled clamp blocks allow secure
grip of inner piston face• Self-locking mechanism
ensures tight grip onpiston during removal
Stock No.30838EX. VAT INC VAT
List Price €32.81 List Price €39.70
*TSP €18.88 *TSP €22.85
CBRK3
CHAIN SPLITTER AND RIVETER KIT• Expert Quality• For splitting chains from No.25 cam chains through to
No.520 motorcycle final drive chains• To successfully press the rivet from heavy duty 520
drive chains, the rivet head must be ground off first
Stock No.31318EX. VAT INC VAT
List Price €92.16 List Price €111.51
*TSP €49.79 *TSP €60.25
MODP
MOTORCYCLE OIL DRAIN PAN
• Designed for use with motrorcycles and oil changes forsmall engines
• High density polyethylene, resistant to to mostchemicals and solvents
• Ribbed surface to aid drainage
Stock No.04265EX. VAT INC VAT
List Price €11.98 List Price €14.49
*TSP €8.10 *TSP €9.80
FSDK
9 PIECE MOTORCYCLE FORKSEAL DRIVER KIT
• Expert Quality• Contents: split drivers size: 35-36mm, 39mm, 41mm,
43mm, 45mm, 46-47mm, 48mm. 49-50mm and 54mm• Split design allows simple use on conventional or
inverted forks• Zinc plated carbon steel hardened and tempered with
knurled ring forextra grip
Stock No.04500EX. VAT INC VAT
List Price €420.00 List Price €508.20
*TSP €239.95 *TSP €290.34
Dual thicknesspad fingers forease of access
Stock No.30834EX. VAT INC VAT
List Price €52.63 List Price €63.68
*TSP €32.36 *TSP €39.15
W2tools-3 EUR 9/9/11 12:30 Page 45
46
MCL4
680KG PNEUMATIC/HYDRAULIC MOTORCYCLE/ATV/SMALL GARDEN MACHINERY LIFTSpecification:Operating air pressure ... 90psi (6.2bar)Air inlet ... 1/4”BSPCapacity ... 680kg (1500lbs)Lifting range ... 200-885mmWorking height stops ... 550; 720; 840mmMaximum height ... 885mmClosed height ... 200mmWorking table as motorcycle only lift (L x W) ... 2200 x 680mmW/table size with extensions for ATV use (L x W) ... 1950 x 1220mmMotorcycle loading ramp (L x W) ... 850 x 200mmWeight ... 260kg (lift only)
• Large lift that supports motorcycles plus all terrain vehicles (ATV), minitractors and other similar-sized vehicles which can be accommodated byusing two additional side platforms for extra width • All steel constructionwith heavy duty foot operated hydraulic pump or pneumatic pump-upsystem with controller and ram assembly • Safety table lock device toprevent accidental lowering • Removable front wheel clamp and rear panelto facilitate rear wheel changes (motorcycles only) • Base assembly fittedwith transport wheels and lock downs to prevent lift from moving whilst inuse • Table surface is stippled for safety and grip whilst loadingmotorcycles • Working table size: 1950 x 1220mm including side extensionplates (L x W) • Three working heights: 550, 720, 840mm • Maximumheight: 885mm • Operating air pressure: 90psi (6.2bar)/Air inlet: 1/4”BSP
MCL1
360kg HYDRAULIC MOTORCYCLE Specification:Capacity ... 360kg (800lbs)Lifting range ... 180-680mmLowest working height ... 420mmMaximum working height ... 610mmClosed height ... 180mmWorking table (L x W) ... 1900 x 530mmLoading ramp (L x W) ... 420 x 530mmRear wheel removal panel (LxW) ... 660 x 215mmWeight ... 104kg (lift only)
MCL2
450kg HYDRAULIC MOTORCYCLELIFTSpecification:Capacity ... 450kg (1000lbs)Lifting range ... 180-815mmWorking height 1 ... 550mmWorking height 2 ... 740mmMaximum height ... 815mmClosed height ... 180mmWorking table (L x W) ... 2200 x 680mmLoading ramp (L x W) ... 600 x 550mmRear wheel removal panel (LxW) ... 690 x 245mmWeight ... 138kg (lift only)
MCL3
450kg PNEUMATIC/HYDRAULICMOTORCYCLE LIFTSpecification:Operating air pressure ... 90psi (6.2bar)Air inlet ... 1/4”BSPCapacity ... 450kg (1000lbs)Lifting range ... 180-815mmWorking height 1 ... 540mmWorking height 2 ... 730mmMaximum height ... 815mmClosed height ... 180mmWorking table (L x W) ... 2200 x 680mmLoading ramp (L x W) ... 600 x 550mmRear wheel removal panel (LxW) ... 690 x 245mmWeight ... 141kg (lift only)
Stock No.37058EX. VAT INC VAT
List Price €591.34 List Price €715.52
*TSP €419.83 *TSP €507.99
Stock No.37157EX. VAT INC VAT
List Price €723.05 List Price €874.89
*TSP €539.95 *TSP €653.34
Stock No.37188EX. VAT INC VAT
List Price €854.74 List Price €1034.23
*TSP €599.96 *TSP €725.95
Motorcycle Lifts - Stock nos.37058, 37157 and 37188Manufactured to EN1494-2000 Specification. All steel construction with safety table lock device to preventaccidental lowering. Adjustable front wheel clamp and wheel stop bar. Safety tie-down loops secure bike whilst liftis in use and removable rear panel to facilitate rear wheel changes. Adjustable lowering speed for safe operation.Base assembly fitted with transport wheels and lock downs to prevent lift from moving whilst in use. Table surfaceis stippled for safety and grip whilst loading motorcycles / ATV’s. Heavy duty foot operated hydraulic pump andramp assembly. Castor wheels have ‘lock downs’ to prevent movement when in use. Supplied fully assembled; youonly need to attach wheel clamp and stop bar.
Stock No.37190EX. VAT INC VAT
List Price €1447.39 List Price €1751.34
*TSP €1099.95 *TSP €1330.94
W2tools-3 EUR 9/9/11 12:30 Page 46
*Typical Selling Price - may vary in-store. 47
Stock No.43929EX. VAT INC VAT
List Price €401.95 List Price €486.36
*TSP €325.00 *TSP €393.25
professional quality jacksAmong the best jacks available on the market, manufactured to extremely high standards,
they are designed for professional workshop use.
PHJ20-35-65
20-35-65 TONNEPNEUMATIC TROLLEY JACK• Expert Quality • Fast lift triple stage
air-operated jack • High quality laser cutsteel • Safety overload protection withdead man’s controls and four positionlocking handle • Chrome molybdenumvanadium pistons with special liquidnitride anti-seize surface • Twin rubbertyred wheels for ease of movementaround workshop • 100mm extension to
increase jacking range • Overall size(approx.) 1060 x 335 x 170mm •
Operating air pressure 100-145psi(7-10bar) • Av. air consumption
9.5cfm/270L/min
PH20
20 TONNE PNEUMATICTROLLEY JACK• Expert Quality • Fast lift single stage
air-operated jack • Manufactured fromhigh quality laser cut steel • Safetyoverload protection with dead man’scontrols and twin position locking handle •Chrome plated piston for long service life• Twin rubber tyred wheels for ease ofmovement around workshop • Suppliedwith 100mm extension to extend jacking
point • Lifting range 215-330mm • Air-operated with male coupling to
receive air line
TJ10-PRO/HD
10 TONNE TROLLEY JACK• Expert Quality • High quality laser cut
steel • Safety overload protection withdead man’s twist lock handle • Rearswivelling wheels for ease of movementaround workshop • Steel wheels forstrength and durability • Quick lift pedalfor rapid saddle raise • Lifting range195-575mm • Tray for holding worktools on jack body • Overall size(approx.) 1535 x 430 x 270mm
TJ6-PRO/HD
6 TONNE TROLLEY JACK• Expert Quality • High quality laser cut
steel • Safety overload protection with deadman’s twist lock handle • Rear swivellingwheels for ease of movement aroundworkshop • Steel wheels for strength anddurability • Quick lift pedal for rapid saddleraise • Lifting range 195-575mm • Tray forholding work tools on jack body • Overallsize (approx.) 1250 x 430 x 220mm
TJ2-HD/PRO
2 TONNE TROLLEY JACK• Expert Quality • High quality laser
cut steel • Safety overload protectionwith dead man’s twist lock handle •Rear swivelling wheels for ease ofmovement around workshop •Polyamide wheels to protect floor andreduce noise • Quick lift pedal forrapid saddle raise • Low entry point75mm from ground level • Liftingrange 75-465mm • Tray for holdingwork tools on jack body • Overall size(approx.) 815 x 365 x 140mm
PHJ15-30
15-30 TONNE PNEUMATICTROLLEY JACK• Expert Quality • Fast lift twin stage air-
operated jack • High quality laser cutsteel • Safety overload protection withdead man’s controls and four positionlocking handle • Chrome molybdenumvanadium pistons with special anti-seizesurface • Twin rubber tyred wheels forease of movement around workshop •Overall size (approx.) 805 x 305 x170mm • Operating air pressure 100-145psi (7-10bar) • Av. air consumption
9.5cfm/270L/min
• Lifting range @20 tonne 180-415mm without ext piece• Lifting range @35 tonne 180-334mm without ext piece• Lifting range @65 tonne 180-258mm without ext piece
• Lifting range @15 tonne 185-370mm without ext. piece• Lifting range @30 tonne 185-275mm without ext. piece
Stock No.43932EX. VAT INC VAT
List Price €2835.00 List Price €3430.35
*TSP €2278.80 *TSP €2757.35
Stock No.43934EX. VAT INC VAT
List Price €1285.20 List Price €1555.09
*TSP €1074.00 *TSP €1299.54
Stock No.43933EX. VAT INC VAT
List Price €2003.40 List Price €2424.11
*TSP €1620.00 *TSP €1960.20
Stock No.43935EX. VAT INC VAT
List Price €1131.48 List Price €1369.09
*TSP €954.00 *TSP €1154.34
Stock No.43930EX. VAT INC VAT
List Price €893.35 List Price €1080.96
*TSP €799.01 *TSP €966.80
W2tools-3 EUR 9/9/11 12:30 Page 47
48
TJ10/HD-LONG
10 TONNE LONG CHASSISHYDRAULIC TROLLEY JACKWITH ‘QUICK LIFT’ FACILITY• ‘Quick Lift’ brings saddle into contact withjacking point without need to pump the handle• Quick release and locking facility allows thehandle to be locked in three positions • Liftingrange 155-550mm • Safety and bypass valvesto prevent overloading the jack • Overall size:1600 x 480 x 250mm
TJ5/HD-LONG
5 TONNE LONG CHASSISHYDRAULIC TROLLEY JACKWITH ‘QUICK LIFT’ FACILITY• ‘Quick Lift’ brings saddle into contact withjacking point without need to pump the handle• Quick release and locking facility allows thehandle to be locked in three positions • Liftingrange 145-550mm • Safety and bypass valvesto prevent overloading the jack • Overall size:1450 x 350 x 200mm
TJ3/HD-LONG
3 TONNE LONG CHASSISHYDRAULIC TROLLEY JACKWITH ‘QUICK LIFT’ FACILITY• ‘Quick Lift’ brings saddle into contact withjacking point without need to pump thehandle • Quick release and locking facilityallows the handle to be locked in threepositions • Lifting range 120-600mm• Safety and bypass valves to preventoverloading the jack • Overall size:1350 x 350 x 200mm
TJ2-PRO-LP
2 TONNE LOW PROFILETROLLEY JACK• Expert Quality • High qualitylaser cut steel • Safety overloadprotection with dead man’s twistlock handle • Polyamide wheels toprotect floor and reduce noise• Rear swivelling and innovativefifth wheel in centre of jack’s bodyfor ease of movement aroundworkshop • Quick lift pedal for rapidsaddle raise • Low entry point75mm from ground level• Lifting range 75-520mm • Tray forholding work tools on jack body• Overall size (approx.)855 x 365 x 140mm
some special featuresof trolley jack 43936
Low profile; only 75mm height at entry point.
Fifth wheel in centre of jack allows excellentmanoeuvrability around the workshop.
SafetyoverloadprotectionJacks are rated to lift acertain load and foryour safety all Draperjacks are fitted withSafety OverloadProtection. If the loadyou are trying to lift isheavier than thecapacity of the jackthe Safety OverloadProtection willprevent the jackfrom operating,saving anypossible damageto the jack orpossible injury.
low profiletrolley jack
this range is IDEAL for use in
the heavy goods, public transport, utility and
agricultural workshop environments.
Stock No.43936EX. VAT INC VAT
List Price €565.75 List Price €684.56
*TSP €478.80 *TSP €579.35
Stock No.48357EX. VAT INC VAT
List Price €545.52 List Price €660.08
*TSP €469.00 *TSP €567.49
Stock No.48356EX. VAT INC VAT
List Price €734.23 List Price €888.42
*TSP €599.00 *TSP €724.79
Stock No.48350EX. VAT INC VAT
List Price €414.53 List Price €501.58
*TSP €350.00 *TSP €423.50
PALLETIZEDDELIVERIESThe products marked withthis logo can only bedelivered on a pallet. Prior
to purchase please ensure you haveadequate facilities to unload palletizeddeliveries. Contact your Draper stockistfor local information.
W2tools-3 EUR 9/9/11 12:31 Page 48
*Typical Selling Price - may vary in-store. 49
TJ2/HD-LONG
2 TONNE LONG CHASSIS HIGH LIFT HYDRAULIC TROLLEY JACKWITH ‘QUICK LIFT’ FACILITY• ‘Quick Lift’ brings saddle into contact with jacking point
without need to pump the handle• Handle with lowering facility• Lifting range 135-800mm• Safety overload and bypass valves to prevent handle
locking at max. ram extension• Overall size: 1200 x 430 x 200mm
TJ3HD/QL
3 TONNE HEAVY DUTY GARAGETROLLEY JACK WITH ‘QUICK LIFT’FACILITY• ‘Quick Lift’ pedal brings saddle into contact with jacking
point without need to pump the handle• Lifting range 145-490mm• Safety overload and bypass valves to prevent handle
locking at max. ram extension• Overall size: 640 x 350 x 160mm
Stock No.59301EX. VAT INC VAT
List Price €271.06 List Price €327.98
*TSP €140.49 *TSP €169.99
TJ2/HD
2 TONNE HEAVY DUTY TROLLEY JACK• Manufactured to EN1494 Specification • Lifting range
130-500mm • Safety overload and bypass valves toprevent handle locking at max. ram extension • Completewith two piece handle • Overall size: 650 x 320 x 160mm
ATJ2/CBA
2 TONNE CROSS BEAM ADAPTOR• For use with Draper Trolley Jack Stock No. 37174 •
Provides extra safety when locating awkward jackingpoints • Ideal for front wheel drive vehicles leavingvehicles wheels free for servicing • Overall length(min.): 580mm, Overall length (max.): 810mm, Saddleelevation (max.): 50mm, Saddle size: 120 x 120mm
ATJ2/TC
200kg TRANSMISSION CRADLE• For use with Draper Trolley Jack Stock No. 37174
(NB: Max. is that of the Transmission cradle - 200kg)• Ideal for jacking and safely removing transmissionsfrom front wheel drive vehicles • Load (max.):200kg,Width: 430mm, Length (min.): 267mm, Length(max.): 375mm, Height: 350mm, Saddle tilt: 30-10°
three from one!This 2 tonne trolley jack (Stock No. 37174) can be used with a cross beam adaptor (Stock No. 56756) or a transmissioncradle (Stock No. 56758) giving extra safety and/or versatility - That’s the Draper difference!
Stock No.48349EX. VAT INC VAT
List Price €309.72 List Price €374.76
*TSP €259.92 *TSP €314.50
Stock No.37174EX. VAT INC VAT
List Price €250.37 List Price €302.95
*TSP €128.93 *TSP €156.00
Stock No.56756EX. VAT INC VAT
List Price €92.16 List Price €111.51
*TSP €51.50 *TSP €62.32
Stock No.56758EX. VAT INC VAT
List Price €71.98 List Price €87.09
*TSP €40.75 *TSP €49.31
Quick lowering facility Large saddleaids stability
3 TONNE HEAVY DUTYGARAGE TROLLEY JACK• Manufactured to EN1494 Specification• Lifting range 145 - 490mm• Safety overload and bypass valves to prevent
handle locking at maximum ram extension• Overall size: 685 x 346 x 160mm
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
59300 Jack €245.52 €297.08 €122.31 €148.0045508 Saddle €3.48 €4.21 €3.15 €3.81
high lift800mm
W2tools-3 EUR 9/9/11 12:31 Page 49
50
TJ2
2 TONNE TROLLEY JACK
Stock No.37036EX. VAT INC VAT
List Price €84.60 List Price €102.37
*TSP €44.96 *TSP €54.40
TJA15/QL
1.5 TONNE LOW PROFILEALUMINIUM TROLLEY JACK WITH‘QUICK LIFT’ FACILITY• Low profile trolley jack with ‘quick lift’ giving extra lift perstroke of the jack handle thereby requiring less effort toachieve the required height • 50mm high front rollerparticularly suitable for low chassis or reduced clearancevehicles • Lifting range: 85 - 445mm • Fitted with 45mmdiameter rear swivelling castor wheels and large cushionedsaddle to aid positioning under the vehicle • Handle twistsfor rapid lowering • 10mm thick anodized aluminiumensuring maximum body strength• Supplied complete withtwo piece handle
Stock No.45329EX. VAT INC VAT
List Price €262.08 List Price €317.12
*TSP €224.38 *TSP €271.50
HGV WHEEL CHOCKS• Expert Quality • For stabilizing HGVs whilstparked • Anti-slip, non-sparking, highly visibleheavy duty HDPE plastic
Stock List Price List Price *TSP *TSPNo. Size For ex. VAT Inc. VAT ex. VAT Inc. VAT
12267 190mm <920mm €28.85 €34.91 €17.10 €20.6912271 250mm >920mm €43.27 €52.36 €24.60 €29.77
RWC
RUBBER WHEEL CHOCKS• Pair of chocks to prevent vehicles movingwhilst working with trolley jacks, scissor jacks,bottle jacks, axle stands or on a slope
Stock No.54500EX. VAT INC VAT
List Price €12.86 List Price €15.57
*TSP €8.35 *TSP €10.10
PROFESSIONALBOTTLE JACKS• Expert Quality• High quality laser cut steel• Fully welded pressure
cylinder for long serviceand carrying handle foreasy transportation
• Safety overload protection• Three piece zinc coated
pumping handle withspring clips for security
Stock List Price List Price *TSP *TSPNo. Capacity Range ex. VAT Inc. VAT ex. VAT Inc. VAT
43928 25T 240-390mm €231.84 €280.53 €158.75 €192.0943925 30T 242-392mm €243.82 €295.02 €206.49 €249.8543926 40T 246-369mm €314.88 €381.00 €258.00 €312.1843927 50T 252-402mm €351.55 €425.38 €289.00 €349.69
HYDRAULICBOTTLE JACKS• Manufactured to
EN1494 Specification• With unique overload
protection system,large stable base andnotched saddle
Stock List Price List Price *TSP *TSPNo. Capacity Range ex. VAT Inc. VAT ex. VAT Inc. VAT
39054 2T 181-345mm €27.96 €33.83 €14.59 €17.6539055 4T 194-372mm €38.47 €46.55 €17.23 €20.8539056 6T 216-413mm €46.99 €56.86 €21.78 €26.3539057 12T 230-465mm €76.63 €92.72 €34.50 €41.7539225 20T 242-452mm €114.98 €139.13 €50.00 €60.50
AS6000
6 TONNE AXLESTANDS (PAIR)• Expert Quality• Min. height535mm/Max. height870mm • Capacity perstand: 6000kg(S.W.L.)• Carbon steelhardened andtempered withhardened steelpins
Stock No.54722EX. VAT INC VAT
List Price €189.91 List Price €229.79
*TSP €99.96 *TSP €120.95
AS2000
2 TONNE AXLE STANDS (PAIR)• Expert Quality •Min. height 310mm/Max.height 520mm • Capacity(max. per stand): 2000kg(S.W.L)• Carbon steel hardenedand tempered withhardenedsteel pins• Manufacturedto BSAU223Specifications
Stock No.54721EX. VAT INC VAT
List Price €69.46 List Price €84.04
*TSP €38.35 *TSP €46.40
AS2000R
2 TONNE AXLE STANDS(PAIR)• Min. height 280mm/Max. height 405mm• Capacity per stand: 2000kg (S.W.L.)• Ratchet-type action• Large saddle (38 x 85mm)• Manufactured to BSAU223Specifications
Stock No.64431EX. VAT INC VAT
List Price €37.13 List Price €44.92
*TSP €22.93 *TSP €27.75
• To EN1494 Specification• Lifting range 130- 3850mm• Safety overload and bypass
valves to prevent handle lockingat maximum extension
• Overall size:535 x 225 x 145mm
BJ12HL
12 TONNE HIGH LIFT HYDRAULICBOTTLE JACK• Range 230-570mm • Manufactured to EN1494Specification • High Lift feature allows easy loading ofvehicle onto bodywork jigs • Large stable base, two stageram and built-in overload protection system
Stock No.55124EX. VAT INC VAT
List Price €173.30 List Price €209.70
*TSP €76.98 *TSP €93.15
W2tools-3 EUR 9/9/11 12:31 Page 50
engine cranesTwo additional models have been added to the range - competitively priced, we haven’t compromised on quality.
*Typical Selling Price - may vary in-store. 51
AEC1000
450kg CHAIN FOR ENGINE CRANES• S.W.L. 450kg• Chain length 780mm• For use with Draper Stock Nos. 02610, 02611, 43924
and 53091 and other manufacturers similar cranes
EC1000
1 tonne FOLDING ENGINE CRANE• Patented double action pump for faster lifting
EC1001
1 tonne FOLDING ENGINE CRANE• Foldable engine crane with single piston
hydraulic pump
EC2001
2 tonne FOLDING ENGINE CRANE• Foldable engine crane with single piston hydraulic
pump
EC2000/PRO
2 tonne FOLDING ENGINE CRANE• Expert Quality • Safety overload valve • Fine
adjustment lowering handle with dead man’soperation to prevent rapid uncontrolled lowering ofload • Polyamide swivelling wheels to protect floorand reduce noise • Supplied fully assembled
Patented double actionpump for faster liftingStock No. 53091 (shown left) features apatented double action pump whichallows a faster pump action when liftingengines out of the vehicle.This canconsiderably shorten the time taken tocarry out this task.
Stock No.53091EX. VAT INC VAT
List Price €326.59 List Price €395.18
*TSP €251.24 *TSP €304.00
Stock No.02610EX. VAT INC VAT
List Price €276.53 List Price €334.60
*TSP €225.00 *TSP €272.25
Stock No.43924EX. VAT INC VAT
List Price €1505.71 List Price €1821.91
*TSP €1325.00 *TSP €1603.25
Stock No.59077EX. VAT INC VAT
List Price €33.72 List Price €40.80
*TSP €24.25 *TSP €29.34
Stock No.02611EX. VAT INC VAT
List Price €380.62 List Price €460.55
*TSP €278.50 *TSP €336.99
swivel hook
W2tools-3 EUR 9/9/11 12:32 Page 51
52
Stock No.53095EX. VAT INC VAT
List Price €196.25 List Price €237.46
*TSP €94.75 *TSP €114.65
Stock No.53094EX. VAT INC VAT
List Price €111.38 List Price €134.77
*TSP €59.95 *TSP €72.54
ES300
300kg UNIVERSAL ENGINE/GEARBOX SUPPORT• Allows work to be carried out on front wheel
drive/transmission/drive shafts with enginesuspended in-situ • Adjustable extension arms withlocking feature
ES500
500kg UNIVERSAL ENGINE/GEARBOX SUPPORT• Enables work to be carried out whilst engine is
suspended in situ • Rubber protected guttersupports • Support centre can be adjusted alongfull length of beam
LL500
500kg LOAD LEVELLER FORENGINE CRANES• S.W.L. 500kg
max • Forlevelling heavyand off centreloads quicklyand easily •For use withDraper EngineCranes andothermanufacturerssimilar cranes
Specification:Capacity ... 300kgMaximum extended width ... 1550mm (approx.)Minimum width ... 1100mm (approx.)Screw depth ... 300mm
Specification:Capacity ... 500kgMaximum extended width ... 1550mm (approx.)Minimum width ... 1100mm (approx.)Screw depth ... 300mm
TJ200T
150kg FLOOR TRANSMISSION JACK• Manufactured to EN1570 Specification• For lifting and lowering gearboxes and differential units• Driven by 1/2” sq dr adaptor• Scissor-type design provides precise movement
allowing user to accurately manoeuvre and fittransmission assembly
• Min. height 170mm/Max. height 570mm
TJ600TV
600kg VERTICALTRANSMISSION JACK• Height range 1175-1985mm• Features high speed lift foot pedal• Hand operated precision release incorporating
overload safety valve, large diameter wheels foreasy manoeuvrability
ES450
450kg ENGINE/ TRANSMISSIONSTAND• Accepts a wide variety of engines and transmissions• The swivelling head (360°) gives accessibility to all
parts of the engine
Specification:Capacity ... 600kgStroke ... 700mmBase width ... 560mmBase length ... 570mmWeight ... 39kg
Specification:Capacity ... 450kgWidth Front ... 400mmRear ... 800mmOverall length ... 800mmHeight ... 910mmWeight ... 21kg
engine/gearbox
lifting/supportIndustrial quality products designed specifically for the professionalautomotive workshop - that’s the Draper difference!
floor transmission jack adjusts
from minimum height of 170mm
to a maximum height of 570mm
Stock No.61033EX. VAT INC VAT
List Price €181.44 List Price €219.54
*TSP €80.35 *TSP €97.22
Stock No.56730EX. VAT INC VAT
List Price €72.02 List Price €87.15
*TSP €37.80 *TSP €45.74
Stock No.53092EX. VAT INC VAT
List Price €172.08 List Price €208.22
*TSP €79.15 *TSP €95.77
Stock No.56731EX. VAT INC VAT
List Price €563.95 List Price €682.38
*TSP €227.95 *TSP €275.82
W2tools-3 EUR 9/9/11 12:32 Page 52
*Typical Selling Price - may vary in-store. 53
HBP/10
10 TONNE HYDRAULIC BENCH PRESS• Hydraulic gauge• Ram stroke 190mm• Working table width 360mm• Overall height 990mm
Specification:Capacity ... 10 tonnesRam stroke ... 190mmHeight - ram to table ... 360mm (max.)
... 190mm (min.)Table aperture ... 140mmWorking table width ... 360mmOverall height ... 990mmWeight ... 53kg
HFP/10
10 TONNE HYDRAULIC FLOOR PRESS• Hydraulic gauge • Ram stroke 190mm• Working table width 420mm • Overall height 1525mm
Specification:Capacity ... 10 tonnesRam stroke ... 190mmHeight - ram to table ... 918mm (max.)
... 0mm (min.)Table aperture ... 90mmWorking table width ... 420mmOverall height ... 1525mmWeight ... 65.5kg
HFP/20
20 TONNE HYDRAULIC FLOOR PRESS• Hydraulic gauge • Ram stroke 190mm• Working table width 555mm • Overall height 1770mm
Specification:Capacity ... 20 tonnesRam stroke ... 198mmHeight - ram to table ... 885mm (max.)
... 33mm (min.)Table aperture ... 105mmWorking table width ... 555mmOverall height ... 1770mmWeight ... 128.5kg
hydraulic presses
HFP50/PRO
50 TONNE HYDRAULICFLOOR PRESS• Expert Quality• Twin pump system• Fast action for rapid approach to the workpiece
and fine for controlled pressure• Hydraulic gauge included• Supplied with two V blocks for working on pipes
and small workpieces• Supplied fully built for speed of installation
- just screw on the gauge and bolt on feet
Specification:Capacity ... 50 tonnesHydraulic stroke ... 120mmHeight - ram to table ... 615mm(max.)
... 165mm(min.)Extension screw ... 75mmHead side stroke ... 250mmTotal stroke (ext. + head side) ... 195mmWorking area width ... 710mmOverall height ... 1810mmWeight ... 239kg
Rack and pinionwinch for safehandling of the
work table.
Sliding head toallow correct
alignment of thepress ram.
Lead screw forrapid setting of
the pressure ram.
Pressure gaugeat eye level toensure correct
load is applied.
quality features...
Stock No.43921EX. VAT INC VAT
List Price €2140.73 List Price €2590.28
*TSP €1720.00 *TSP €2081.20
Stock No.58157EX. VAT INC VAT
List Price €401.28 List Price €485.55
*TSP €329.00 *TSP €398.09
Stock No.58158EX. VAT INC VAT
List Price €449.95 List Price €544.44
*TSP €360.00 *TSP €435.60
Stock No.58159EX. VAT INC VAT
List Price €717.19 List Price €867.80
*TSP €580.00 *TSP €701.80
W2tools-3 EUR 9/9/11 12:32 Page 53
54
BR4/KIT
4 TONNE HYDRAULICBODY REPAIR KIT• 4 tonne pump unit• 15 accessories• Steel storage/carrying case• Weight: 22.5kg
Stock No.37874EX. VAT INC VAT
List Price €156.72 List Price €189.63
*TSP €137.00 *TSP €165.77
BR10/KIT
10 TONNEHYDRAULICBODY REPAIR KIT• 10 tonne pump unit• 14 accessories• Steel storage/carrying case• Weight: 38kg
Stock No.37875EX. VAT INC VAT
List Price €237.05 List Price €286.83
*TSP €199.17 *TSP €241.00
1 TONNE LOAD SLINGS• Expert Quality• The safe working load (SWL) is rated
at 1000kg for a load at one end(straight configuration)
• The safe working load (SWL) is ratedat 2000kg for a load between the loopeyes (‘U’ configuration)
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
02381 1M €5.98 €7.23 €3.60 €4.3602382 2M €9.84 €11.91 €5.95 €7.2002383 3M €13.58 €16.44 €8.15 €9.8648310 4M €15.31 €18.53 €9.20 €11.1348330 5M €22.68 €27.44 €13.65 €16.52
2 TONNE LOAD SLINGS• Expert Quality• The safe working load (SWL) is rated
at 2000kg for a load at one end(straight configuration)
• The safe working load (SWL) is ratedat 4000kg for a load between the loopeyes (‘U’ configuration)
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
02386 1M €11.40 €13.79 €6.90 €8.3502387 2M €18.96 €22.94 €11.35 €13.7302388 3M €26.35 €31.89 €15.85 €19.1802389 4M €33.43 €40.45 €20.15 €24.3848314 5M €36.60 €44.29 €21.98 €26.60
3 TONNE LOAD SLINGS• Expert Quality• The safe working load (SWL) is rated
at 3000kg for a load at one end(straight configuration)
• The safe working load (SWL) is ratedat 6000kg for a load between the loopeyes (‘U’ configuration)
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
48316 1M €12.24 €14.81 €7.40 €8.9548317 2M €22.75 €27.53 €13.65 €16.5202393 3M €39.91 €48.29 €23.95 €28.9848319 4M €43.44 €52.56 €26.15 €31.6448320 5M €53.98 €65.31 €32.40 €39.20
4 TONNE LOAD SLINGS• Expert Quality• The safe working load (SWL) is rated
at 4000kg for a load at one end(straight configuration)
• The safe working load (SWL) is ratedat 8000kg for a load between the loopeyes (‘U’ configuration)
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
48321 2M €31.80 €38.48 €19.15 €23.1702397 3M €54.86 €66.39 €32.95 €39.8748323 4M €59.98 €72.57 €35.98 €43.5348324 5M €74.28 €89.88 €47.60 €57.60
5 TONNE LOAD SLINGS• Expert Quality• The safe working load (SWL) is rated
at 5000kg for a load at one end(straight configuration)
• The safe working load (SWL) israted at 10,000kg for a loadbetween the loop eyes(‘U’ configuration)
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
02400 2M €49.75 €60.20 €29.95 €36.2402401 3M €69.48 €84.07 €41.70 €50.4602402 4M €89.45 €108.23 €53.70 €64.9802403 5M €109.32 €132.28 €65.60 €79.38
draper expert quality
load slingsLoad slings are designed for lifting and moving heavy,awkward-shaped items around warehouses, distributioncentres and quaysides. They can be used in straightconfiguration or as a pair to increase the carrying capacity.As with lifting and carrying a risk assessment should becarried out by the operator prior to using a load sling. Thisincludes checking for acid or caustic burns; melting orcharring of any part of the sling’s surface; snags, punctures,tears or cuts; broken or worn out stitching and the slingitself is not stretched.When not in use slings must be storedcorrectly and inspected regularly.
Draper load slings are tested to breaking point by anindependent and respected UK test house to ensure theyare totally safe at the rated load.
Manufactured to BS EN 1492-1:2000 from heavy dutypolyester webbing with reinforced lifting eyes and colourcoded to European standards to identify capacities.
hydraulic bodyrepair kitsPowerful body repair kits - Stock No. 37874 has a 4 tonne pumpunit, whilst Stock No. 37875 has a super-heavy 10 tonne pumpunit. Both are supplied in toughsteel storage cases.
W2tools-3 EUR 9/9/11 12:32 Page 54
*Typical Selling Price - may vary in-store. 55
BC1000
1 tonne BEAM CLAMP• Expert Quality• Girder beam width: 75-260mm• Overall width (beam clamp): 180-360mm• Depth (beam clamp): 64mm
Stock No.48344EX. VAT INC VAT
List Price €97.44 List Price €117.90
*TSP €46.75 *TSP €56.57
BC2000
2 tonne BEAM CLAMP• Expert Quality• Girder beam width: 75-260mm• Overall width (beam clamp): 180-360mm• Depth (beam clamp): 64mm
Stock No.48346EX. VAT INC VAT
List Price €99.82 List Price €120.78
*TSP €48.60 *TSP €58.81
BC3000
3 tonne BEAM CLAMP• Expert Quality• Girder beam width: 80-354mm• Overall width (beam clamp): 235-490mm• Depth (beam clamp): 103mm
Stock No.48347EX. VAT INC VAT
List Price €143.16 List Price €173.22
*TSP €71.95 *TSP €87.06
BC5000
5 tonne BEAM CLAMP• Expert Quality• Girder beam width: 80-354mm• Overall width (beam clamp): 235-490mm• Depth (beam clamp): 110mm
Stock No.48348EX. VAT INC VAT
List Price €166.32 List Price €201.25
*TSP €81.00 *TSP €98.01
Stock No.48335EX. VAT INC VAT
List Price €143.16 List Price €173.22
*TSP €76.50 *TSP €92.57
Stock No.48336EX. VAT INC VAT
List Price €168.65 List Price €204.06
*TSP €90.60 *TSP €109.63
Stock No.48338EX. VAT INC VAT
List Price €287.74 List Price €348.16
*TSP €143.95 *TSP €174.18
Stock No.48339EX. VAT INC VAT
List Price €397.66 List Price €481.16
*TSP €221.95 *TSP €268.56
Stock No.48340EX. VAT INC VAT
List Price €506.11 List Price €612.40
*TSP €268.20 *TSP €324.52
beam clampsFour professional beam clampsfor semi-permanent attachmentto steel RSJ’s to act as lifting pointfor chain blocks, hoists andlifting tackle. These usefulproducts can also be used for thelifting and transfer of steelbeams and as a pulling clamp.All four are supplied completewith a test certificate...
Ideal for the workshop or factory; these chain hoists have highquality welded chains with safety latches on the load hooks andare tested and certified to BS EN 13157:2004.Their compact gear housing allows use inareas of limited clearance, plus they featuretriple spurred geared shafts and pinions withload braking... that's the Draper difference!
chain hoists
1, 2, 3 &5 tonne
capacities
standardlift: 3M
CH500
0.5 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality• High quality welded chain, 5mm diameter, with
safety latches on the load hooks• Hook aperture: 23mm
CH1000
1 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality• High quality welded chain, 5mm diameter, with
safety latches on the load hooks• Hook aperture: 27mm
CH2000
2 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality• High quality welded chain, 6mm diameter, with
safety latches on the load hooks• Hook aperture: 35mm
CH3000
3 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality• High quality welded chain, 7mm diameter, with
safety latches on the load hooks• Hook aperture: 39mm
CH5000
5 tonne MANUAL CHAIN HOIST(CHAIN BLOCK)• Expert Quality• High quality welded chain, 10mm diameter, with
safety latches on the load hooks• Hook aperture: 45mm
W2tools-3 EUR 9/9/11 12:32 Page 55
56
Stock No.48342EX. VAT INC VAT
List Price €287.74 List Price €348.16
*TSP €131.95 *TSP €159.66
Stock No.48343EX. VAT INC VAT
List Price €397.66 List Price €481.16
*TSP €199.20 *TSP €241.03
EH125/250
125/250kg 500W 230V POWERHOISTSpecification:Capacity: (single cable) ... 125kg
(double cable) ... 250kgLifting height: (single cable) ... 11M
(double cable) ... 5.5MLifting speed ... 1 min (approx.)Cable length ... 12MCable dia. ... 3.0mm
Stock No.48333EX. VAT INC VAT
List Price €143.57 List Price €173.72
*TSP €119.95 *TSP €145.14
EH200/400
200/400kg 750W 230V POWERHOISTSpecification:Capacity: (single cable) ... 200kg
(double cable) ... 400kgLifting height: (single cable) ... 11M
(double cable) ... 5.5MLifting speed ... 1 min (approx.)Cable length ... 12MCable dia. ... 3.8mm
Stock No.48334EX. VAT INC VAT
List Price €175.15 List Price €211.93
*TSP €159.95 *TSP €193.54
CC2
MECHANICS CREEPER/SEAT• Heavy duty powder coated steel frame• Easily converts to seat form• Quality covering• Length: 1200mm
Stock No.56224 1200mmEX. VAT INC VAT
List Price €187.27 List Price €226.60
*TSP €95.00 *TSP €114.95CC4
MECHANICS CREEPER• Rigid PVC construction with six multi directional castors for easy movement• Moulded back for user comfort with tool trays and foam head rest• Maximum carrying weight 150kg (23.5 stone)• Length: 1010mm
Stock No.43976 1010mm
EX. VAT INC VATList Price €94.80 List Price €114.71
*TSP €52.50 *TSP €63.53
LH1500
1.5 tonne LEVER HOIST• Expert Quality• Hook aperture: 31mm• Lever pull to lift full load: 26kg
LH3000
3 tonne LEVER HOIST• Expert Quality• Hook aperture: 40mm• Lever pull to lift full load: 38kg
Ideal for theworkshop orfactory; theselever hoistsinclude a ‘freechaining’feature to allowslack in thechain to betaken up priorto ratchet armengagementand a totallyenclosed piniongear with heavyduty brake.Each issupplied with atest certificate.
leverhoists
Stock No.48341EX. VAT INC VAT
List Price €215.47 List Price €260.72
*TSP €109.20 *TSP €132.13
LH750
0.75 tonne LEVER HOIST• Expert Quality• Hook aperture: 26mm• Lever pull to lift full load: 22kg
powerhoists
MECHANICS FOAM MATS• Ideal for working under vehicles etc. • High quality closed-cell EVA foam fully oil and
water-resistant
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
64278 220 x 336mm €15.84 €19.17 €9.50 €11.5064279 980 x 380mm €43.99 €53.23 €25.80 €31.22
Our power hoists are ideal foruse in many industrialapplications where an existingsupport facility exists.They are approved to EU and UKlifting regs and include remotecontrol units with emergencystop buttons and supportbrackets.
W2tools-3 EUR 9/9/11 12:32 Page 56
*Typical Selling Price - may vary in-store. 57
DPW2
BENCH-MOUNTED PARTS WASHER• For the degreasing of component parts prior to assembly• Sturdy steel construction, enamelled finish with lid• Tank capacity 12L• Overall dimensions 470 x 340 x 250mm• Not suitable for use with solvent based cleaning fluids• Fitted with cable and approved plug
Stock No.37826EX. VAT INC VAT
List Price €138.29 List Price €167.33
*TSP €71.95 *TSP €87.06
DPW1
FLOOR STANDING PARTS WASHER• For the degreasing of component parts prior to assembly• Sturdy steel construction, enamelled finish with “firedrop” lid • Tank capacity 54.5L • Overall dimensions800 x 550 x 890mm • Dimensions: Tank-internal 725 x790 x 270mm • Not suitable for use with solvent basedcleaning fluids • Fitted with cable and approved plug
Stock No.37825EX. VAT INC VAT
List Price €301.61 List Price €364.95
*TSP €155.95 *TSP €188.70
4858
260mm PARTS CLEANING BRUSH• Plastic handle with bristle head
Stock No.38860 25mmEX. VAT INC VAT
List Price €4.03 List Price €4.88
*TSP €2.40 *TSP €2.90
OFW57-120
57-120mm OIL/FUEL FILTER PLIERS/WRENCH• Expert Quality• Slip joint allows easy adjustment and swivel
gripping jaws adjust to 45° and 90°positions to access oil filtersin awkward positions.
Stock No.30822EX. VAT INC VAT
List Price €46.42 List Price €56.16
*TSP €25.95 *TSP €31.40
CWHD2
60-160mm HEAVY DUTYCHAIN WRENCH
Stock No.30825EX. VAT INC VAT
List Price €46.06 List Price €55.73
*TSP €27.00 *TSP €32.67
OFW3
75-120mmTHREE LEGOIL FILTERWRENCH
Stock No.37871EX. VAT INC VAT
List Price €21.55 List Price €26.08
*TSP €10.75 *TSP €13.01
OFW100
100mm OIL FILTER WRENCH
Stock No.10784EX. VAT INC VAT
List Price €9.41 List Price €11.38
*TSP €5.95 *TSP €7.20
255
130mm OIL FILTER WRENCH• Heavy duty chain with tightening nut which can be
operated with a 1/2” squaredrive or 24mmwrench
Stock No.77592EX. VAT INC VAT
List Price €6.36 List Price €7.70
*TSP €3.90 *TSP €4.72
OFW300
280mm OIL FILTERSTRAP WRENCH• 1M x 38mm
wide heavyduty webbingstrap
Stock No.56137EX. VAT INC VAT
List Price €15.84 List Price €19.17
*TSP €9.00 *TSP €10.89
256
120mm OIL FILTER STRAP WRENCH• Can be driven by 1/2” sq drive
or 21mm wrench
Stock No.13771EX. VAT INC VAT
List Price €7.18 List Price €8.68
*TSP €4.10 *TSP €4.96
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
23759 Strap Wrench €56.42 €68.27 €34.75 €42.0523767 Spare Strap €16.34 €19.78 €10.75 €13.01
• Expert Quality• Swivel head design with
14mm hexagonal shaftallowing socket or spanner
use for additional torque• 06B heavy duty duplex
chain for safety andsecurity with double
locking system
• The automatic action clampingring has a serrated inner
surface for secure grip• Fits most oil filters
• Expert Quality• Ideal for use on car and
commercial vehicle oil filters• Serrated legs clamp oil filter for
easy removal• 1/2” sq. drive with 1/2” sq. dr./
19mm - 3/4” AF spanner adaptor
1M ELORA STRAP WRENCH• Heavy duty strap, ideal for use on sanitary fittings, pipes, oil filters, etc. • Capacity 280mm (approx,) • Bar length: 280mm • Width of strap: 25mm• Handle manufactured from chrome vanadium steel hardened, tempered and
chrome plated for corrosion protection
• Ribbed jaw designensures solid gripon filters duringremoval
W2tools-3 EUR 9/9/11 12:32 Page 57
58
OFC-12PRO
OIL FILTER CRUSHER• Expert Quality• For the disposal of used oil filters from cars, vans,
tractors, etc.• Flattens oil filters and extracts last drop of oil for
recycling of both used oil and metal filter• Air operated with safety lock-out device which prevents
the door being opened during operation• Designed to fit onto the top of a standard 205L steel oil
drum• Lifting eye on crusher to lift and replace disposal vessel
when full• Overall unit height 850mm• Weight 78kg
Stock No.43922EX. VAT INC VAT
List Price €1888.75 List Price €2285.39
*TSP €1535.00 *TSP €1857.35
SP4
FUEL SYPHON PUMP• Hand-operated syphon pump suitable for transferring
diesel, petrol, water and other inert liquids• Syphon bulb with one-way valve and barbed connectors
on each end suitable for 3/8” I/D plastic flexible pipe• Two 900mm long flexible plastic transparent pipes
suitable and approved for use with petroleum-basedfluids nominally 3/8” I/D x 2mm wall thickness with onemetal spring clip each end
Stock No.43904EX. VAT INC VAT
List Price €20.11 List Price €24.34
*TSP €10.79 *TSP €13.05
OE2
MANUAL OR PNEUMATIC OILEXTRACTOR• Expert Quality• Ideal for one person operation• For the extraction of engine oils from motor vehicles,
motor bikes, marine engines, gearboxes, generatorsetc. without the removal of the oil drain plug
• Easily operated by using hand pump action orcompressed air supply
• Supplied with 1.5M of suction tube and three extractionstraws
Specification:Reservoir capacity ... 10LAir inlet size ... 1/4” BSPSuction tube pressure ... 0.8MPaWeight (empty) ... 4kg
Stock No.77057EX. VAT INC VAT
List Price €179.30 List Price €216.96
*TSP €102.00 *TSP €123.42
SRIK
OIL SEAL REMOVAL ANDINSTALLATION KIT
• Expert Quality• Allows simple removal of and replacement of oil seals
preventing unnecessary and time-consumingdismantling of engines.
• Comprises of 19 popular-sized adaptors and compatibleseal puller
Stock No.04582EX. VAT INC VAT
List Price €146.40 List Price €177.14
*TSP €85.80 *TSP €103.82
OD36
36L TELESCOPICOIL DRAINER• Adjustable height from
760 to 1600mm• Suitable only for engine
or gearbox oil
Stock No.65346EX. VAT INC VAT
List Price €156.05 List Price €188.82
*TSP €80.35 *TSP €97.22
FROM THIS
reduced size -reduced waste -
oil removed
TO THIS
oil change& top up
WARNING:NOT TO BE USEDFOR CORROSIVE
CHEMICALS
W2tools-3 EUR 9/9/11 12:32 Page 58
*Typical Selling Price - may vary in-store. 59
OIL DRAINERS• Expert Quality• 2M x 25.4mm discharge hose• Air discharge• Safety valve• Castors for easy manoeuvrability
around the workshop• 18L steel collection pan with oil
reservoir level indicator
Stock List Price List Price *TSP *TSPNo. Capacity Height ex. VAT Inc. VAT ex. VAT Inc. VAT
78404 65L 1510mm €479.98 €580.77 €259.00 €313.3978405 90L 1850mm €510.00 €617.10 €282.00 €341.22
OFCS/SET15
15 PIECE 3/8" Sq. Dr. OIL FILTERCUP SOCKET SET• Expert Quality• Comprehensive set suitable for most common sizes of
oil filters fitted to a variety of popular American,European and Far Eastern car marques
• Comprises 14 different diameter sockets and 1/2” (F) x3/8” (M) adaptor
Stock No.40105EX. VAT INC VAT
List Price €82.25 List Price €99.52
*TSP €41.50 *TSP €50.22
BD205
DRAIN LID FOR 205L BARRELS
• Intended to be installed atop a standard 205L barrel, thedrain lid marries with the barrel inlet
• Chemical resistant high density polyethylene with UVstabilizer
• Ribbed drainage channels and a filter gate to catchforeign objects
Stock No.04266EX. VAT INC VAT
List Price €65.40 List Price €79.13
*TSP €39.50 *TSP €47.80
LPDP
30L SLIMLINE OIL ANDWATER DRAIN PAN• Expert Quality• Allows oil or water to be drained without the need toraise the vehicle or waste valuable liquids • Strong durableplastic with recessed moulded integral handles • Fourheavy duty low profile swivelling castors • Removable anti-splash grille • Three separate drain plugs
Stock No.40143EX. VAT INC VAT
List Price €79.20 List Price €95.83
*TSP €43.14 *TSP €52.20
OP16
16L OIL DRAIN PAN• Anti-splash lip, large handles and enclosed
spout helps reduce spillages• Overall diameter
450mm
Stock No.73038EX. VAT INC VAT
List Price €27.10 List Price €32.79
*TSP €14.87 *TSP €17.99
HEAVY DUTY FUNNELS• Expert Quality• Translucent polypropylene• Dust cover, anti-spill/splash lip and wire mesh filter
in base to prevent the ingress of foreign matter• Barrel connector supplied with 230mm/3L funnel
Stock List Price List Price *TSP *TSPNo. Size Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
24774 175mm 1.7L €7.97 €9.64 €4.75 €5.7524771 230mm 3.0L €10.03 €12.14 €5.99 €7.25
FF1
PVC FLEXIBLE FUNNEL• Supplied with removable gauze filter
Stock No.56141EX. VAT INC VAT
List Price €2.21 List Price €2.67
*TSP €1.50 *TSP €1.82
FS4
4 piece PLASTIC FUNNEL SET• Contents: 50, 75, 100 and 120mm diameter• Four different sized tough plastic funnels
Stock No.43853EX. VAT INC VAT
List Price €1.78 List Price €2.15
*TSP €1.19 *TSP €1.44
SF1
OIL FUNNEL• Holds square and
rectangular oil bottles• Aids efficient emptying
Stock No.46598EX. VAT INC VAT
List Price €3.98 List Price €4.82
*TSP €2.40 *TSP €2.90
W2tools-3 EUR 9/9/11 12:32 Page 59
60
DPK/SET
5 PIECE DRAIN PLUG KEY SET• Contents: 5/8” - 9mm hex; 3/8” - 11mm sq; 10 - 12mm
hex; 8 - 13mm sq; 14 - 17mm hex.• Double-ended key sizes with satin chrome plated finish
Stock No.56627EX. VAT INC VAT
List Price €20.59 List Price €24.92
*TSP €10.75 *TSP €13.01
DDPK/SET
10 PIECE 3/8” Sq. Dr. DRAIN PLUGKEY SET• 8 assorted plug key sizes, socket retaining bar and
sliding tee bar• Fits most modern vehicles
Stock No.38329EX. VAT INC VAT
List Price €33.19 List Price €40.16
*TSP €21.00 *TSP €25.41
SPRK114
114 PIECE OIL SUMP PLUGREPAIR KIT• Expert Quality• Comprehensive kit for the repair of damaged oil sump
plug drain plug threads• Comprises six different-sized taps each with six sump
bolts and washers.• Packed in blow mould case with EVA foam insert
Stock No.24014EX. VAT INC VAT
List Price €230.47 List Price €278.87
*TSP €126.00 *TSP €152.46
63476 HDPK1 €10.22 €12.37 €6.60 €7.99
38321 DDPK2 €3.50 €4.24 €2.35 €2.84
38322 DDPK3 €3.50 €4.24 €2.35 €2.84
38323 DDPK5 €3.50 €4.24 €2.35 €2.84
38324 DDPK6 €3.50 €4.24 €2.35 €2.84
38325 DDPK7 €3.50 €4.24 €2.35 €2.84
38326 DDPK8 €3.50 €4.24 €2.35 €2.84
38327 DDPK9 €3.50 €4.24 €2.35 €2.84
38328 DDPK10 €3.50 €4.24 €2.35 €2.84
Stock Part List Price List Price *TSP *TSPNo. No. Description ex. VAT inc. VAT ex. VAT inc. VAT
1/2" Sq. Dr. Audi/VW Drain Plug KeyExpert Quality, for use on the tamperproof plug ontransmission/gearboxes of VW/Audi vehicles. Display packed.
8mm - 5⁄16” Hexagon 3/8” Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:BMW: Back Axle; Ford CVH: Gearbox;GM (Vauxhall/Opel): Back Axle & Gearbox
11mm Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:Ford (except CVH): Back Axle & Gearbox
17mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Audi: Gearbox; Rover Group (Austin): GearboxBMW: Gearbox; Volkswagen: Gearbox
8mm Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Citroën: Gearbox & Sump; Peugeot: Back Axle, Gearbox & SumpRenault: Sump; Talbot: Gearbox & Sump; Volvo: Sump
3/8" Square 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Honda: Gearbox & Sump; Mazda: Back Axle & GearboxRenault: Gearbox & Sump; Saab: GearboxVolvo: Back Axle & Sump
12mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packed.Vehicle Applications:{Fiat: Sump; Lancia: Gearbox & SumpPeugeot/Talbot: Back Axle, Gearbox & Sump
14mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packedVehicle Applications:Lancia: Gearbox & Sump; Mercedes: Back Axle ,Gearbox & Sump
10mm Hexagon 3/8" Sq. Dr. Drain Plug KeyChrome vanadium steel hardened and tempered. Display packedVehicle Applications:Ford Sierra: Back Axle
drain plugkeys
W2tools-3 EUR 9/9/11 12:32 Page 60
*Typical Selling Price - may vary in-store. 61
AHT/LED/1WAAA/B
1 LED (1W) SUPER BRIGHTALUMINIUM TORCH(3 x AAA BATTERIES)• Expert Quality• Machined high quality aluminium body• Water and impact-resistant • Wrist strap• 1W LED gives out around 18% more
light than a conventional LED• Uses 3 x AAA batteries
(supplied)
Stock No.08388EX. VAT INC VAT
List Price €23.52 List Price €28.46
*TSP €11.98 *TSP €14.50
6V RUBBER TORCH/LANTERN (1 x PJ996 BATTERY)• Expert Quality• Impact-resistant rubber housing • High intensity krypton bulb • Adjustablestand which allows the lamp to pivot horizontally, vertically and at 45° • UsesPJ996 battery (sold separately)
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
71459 Torch €20.28 €24.54 €10.75 €13.0162866 Battery €7.01 €8.48 €3.55 €4.30
T2A
6V ABS TORCH/LANTERN(1 x PJ996 BATTERY)• Impact-resistant rubber housing• Tilting stand for hands-free operation• High intensity krypton bulb• Uses PJ996
battery - soldseparately
Stock No.40121EX. VAT INC VAT
List Price €13.30 List Price €16.09
*TSP €6.49 *TSP €7.85
T5
6V ABS TORCH/LANTERN(2 x PJ996 BATTERIES)• Impact-resistant ABS housing• High intensity krypton bulb• Uses 2 x PJ996 batteries (sold separately)
Stock No.59087EX. VAT INC VAT
List Price €15.17 List Price €18.35
*TSP €9.10 *TSP €11.01
HL5
1W LED HEAD LAMP(3 x AAA BATTERIES)• Expert Quality• Adjustable straps and foam pad for comfort • Suitablefor hands-free work in dark areas • Water-resistant• The 1W LED gives out between 15-25% more light thana conventional LED • Dual settings for high, lowand intermittent light • Batteriessold separately
Stock No.43760EX. VAT INC VAT
List Price €35.02 List Price €42.37
*TSP €15.04 *TSP €18.20
T/MPUT
3 LED TORCH WITH FLEXI-HEAD ANDMAGNETIC PICK-UP FACILITY• Expert Quality,• Machined high quality aluminium, water
and impact-resistant with on/off switch• Magnetic torch head allows pick-up
from dark areas and handleextends from 215-685mm
Stock No.03046EX. VAT INC VAT
List Price €34.13 List Price €41.29
*TSP €19.96 *TSP €24.15
DLR03/HD24
TRADE PACK OF 24 x AAA SIZEHEAVY DUTY ALKALINE BATTERIES
Stock No.64247EX. VAT INC VAT
List Price €21.10 List Price €25.53
*TSP €7.98 *TSP €9.65
DLR6/HD24
TRADE PACK OF 24 x AA SIZE HEAVYDUTY ALKALINE BATTERIES
Stock No.64248EX. VAT INC VAT
List Price €21.10 List Price €25.53
*TSP €7.98 *TSP €9.65
DLR14/HD12
TRADE PACK OF 12 x C SIZE HEAVYDUTY ALKALINE BATTERIES
Stock No.64249EX. VAT INC VAT
List Price €37.61 List Price €45.51
*TSP €14.87 *TSP €17.99
DLR20/HD12
TRADE PACK OF 12 x D SIZE HEAVYDUTY ALKALINE BATTERIES
Stock No.64250EX. VAT INC VAT
List Price €40.82 List Price €49.40
*TSP €17.52 *TSP €21.20
D6LR61/HD12
TRADE PACK OF 12 x PP3 SIZEHEAVY DUTY ALKALINE BATTERIES
Stock No.64251EX. VAT INC VAT
List Price €63.98 List Price €77.42
*TSP €27.98 *TSP €33.85
• The flexible neck allows pick-upand light in hard-to-get at areas.
• Supplied with 4 x LR(SR)44batteries
• Six packs offour batteriesfor high drainapplications
• Six packs offour batteriesfor high drainapplications
• Six packs oftwo batteriesfor high drainapplications
• Six packs oftwo batteriesfor high drainapplications
• Singlebatteriesfor high drainapplications
automotivelighting
W2tools-4 EUR 9/9/11 13:00 Page 61
Joe Osborne -one of the United Autosports driversand a British Racing Drivers Club
(BRDC) “rising star”
Joe relies on his mechanics,his mechanics use and rely on
Draper Tools
62
Stock No.78931EX. VAT INC VAT
List Price €44.23 List Price €53.52
*TSP €25.80 *TSP €31.22
RWL1
6V WARNING LAMPWITH BATTERY• For hanging on roadworks
and waste skips etc.• Amber lens with high
intensity yellow body• Side fixing facility with bolt
for waste skips etc.• Supplied with 6V battery
(PJ996)
Stock No.72091EX. VAT INC VAT
List Price €17.40 List Price €21.05
*TSP €9.50 *TSP €11.50
IL5
12V 24W HEAVY DUTY HANDLAMPWITH ON/OFF SWITCH• Expert Quality• Swivelling steel clamp, on/off switch, steel reflector,
nitrile steel and domed polycarbonate lens and impactresistant rubber handle
Stock No.61299EX. VAT INC VAT
List Price €39.60 List Price €47.92
*TSP €23.95 *TSP €28.98
574A
230V INSPECTION LAMP• Reflective head with hang up hook• Supplied with 6M (approx.) cable and approved plug.• Max. 60W Eddison screw bulb (sold separately)
Stock No.73528EX. VAT INC VAT
List Price €28.75 List Price €34.79
*TSP €12.39 *TSP €14.99
IL8-PRO
8W 230V FLUORESCENT INSPECTIONLAMP• Expert Quality • IP64 rated • Hydro-carbon-resistantprismatic tube casing for maximum light output •Hexagonal handle and cap bolsters to prevent ‘roll-away’when using • Encapsulated tube for easy changing andprevents glass splinters if dropped • Useful hang up hookand supplied with 5M (approx.) of cable and 3 pin plug •Spare tubes available
Stock No.08290EX. VAT INC VAT
List Price €55.44 List Price €67.08
*TSP €34.75 *TSP €42.05
576HLB
11W 230V FLUORESCENTINSPECTION LAMP• 11W fluorescent “U” tube• Useful hang-up hook• 5M (approx.) cable and approved plug
Stock No.87066EX. VAT INC VAT
List Price €24.58 List Price €29.74
*TSP €14.35 *TSP €17.36
577HLA
8W 12V DC FLUORESCENTINSPECTION LAMP• Useful hang-up hook • Supplied with 3M (approx) of cable, connector for
vehicle cigarette lighter socket and crocodile clips forcar battery
Stock No.65314EX. VAT INC VAT
List Price €14.78 List Price €17.89
*TSP €7.50 *TSP €9.08
inspection and warning lamps
RHL1001
1 MILLION CANDLE POWERRECHARGEABLE HALOGEN ANDLED LAMP• Combination halogen and LED lamp ideal for camping,caravanning, automotive, security and many otherapplications • Halogen light gives up to 25 minutescontinuous use from one single charge • LED viewinglight built-in to the handle with separate on/off switchwhich gives up to 50 hours continuous from one charge• Supplied with 230V mains adaptor with approved plugand car cigarettelighter-type plug
• Supplied with 7.25Mof stripped cable and24W bulb
• Manufactured toBS EN 60598-1:2000
W2tools-4 EUR 9/9/11 13:00 Page 62
*Typical Selling Price - may vary in-store. 63
RIL27E
RECHARGEABLE MAGNETIC 27 LEDINSPECTION LAMP• Expert Quality• Heavy duty plastic with magnetic strip on the back,rubber bumper to prevent damage and hang up hook• Gives up to five hours continuous working time betweencharges • Maximum charging time three hours• Length: 320mm • Supplied with BSapproved 3 pin 230V charger
Stock No.40897EX. VAT INC VAT
List Price €78.12 List Price €94.53
*TSP €40.99 *TSP €49.60
RIL36
RECHARGEABLE 36 LED WORKLIGHT• Heavy duty plastic with useful hang up hook• Gives up to three hours continuous working time
between charges• Maximum charging time six hours• Length: 255mm• Supplied with BS approved 3 pin 230V charger and a
12V DC charger with vehicle cigarette lighter plug
Stock No.02583EX. VAT INC VAT
List Price €59.28 List Price €71.73
*TSP €29.96 *TSP €36.25
RIL60
RECHARGEABLE 60 LED INSPECTIONLAMP• Heavy duty plastic with useful hang up hook• Gives up to five hours continuous working time
between charges• Maximum charging time three hours• Length: 425mm• Supplied with BS approved 3 pin 230V charger and a
12V DC charger with vehicle cigarette lighter plug
Stock No.40898EX. VAT INC VAT
List Price €60.82 List Price €73.59
*TSP €28.51 *TSP €34.50
RCR15
15M 230V AC RETRACTABLEEXTENSION REEL• Expert Quality• Integral ceiling/wall bracket• Bracket swivels through 180°• Keeps work space free from unwanted lengths of cable• Supplied with 15M of cable with one 13A socket
Stock No.79009EX. VAT INC VAT
List Price €197.47 List Price €238.94
*TSP €109.80 *TSP €132.86
A4/L
500CC HEAVY DUTY LEVERGREASE GUN• For bulk or cartridge loading with stiff, medium or
heavy grease for agricultural or industrial applications• Delivery tube and hydraulic connector• Safe working pressure 62Mpa (9000 psi)
Stock No.47809EX. VAT INC VAT
List Price €40.13 List Price €48.55
*TSP €13.21 *TSP €15.99
A7/L
500CC GREASE GUN• Lever action gun for use with standard grease gun
cartridges and bulk• Supplied with delivery tube, connector with 1/8” BSPT
threads and pressure relief valve• Safe working pressure 55MPa (8000psi)
Stock No.47807EX. VAT INC VAT
List Price €22.68 List Price €27.44
*TSP €11.28 *TSP €13.65
A5/L
500CC OIL SUCTION GUN• For use on vehicles and machinery such as gearboxes,
axles, etc. • Complete with flexible delivery tube 10mm bore
Stock No.47812EX. VAT INC VAT
List Price €20.83 List Price €25.21
*TSP €10.75 *TSP €13.01
high volume high pressure
grease pumpGP-DA5
HIGH VOLUME/HIGH PRESSUREGREASE PUMP• Expert Quality• Portable hand-operated grease pump providing high
pressure greasing where power is not available• The gun has a double action trigger which allows the user
the option of high pressure delivery - 0.45g at 690MPa(10,000psi) or high volume at 1.25g per shot
• Gun is connected to drum by 1.5M of 1/2” I.D. highpressure delivery tube with a 360° swivelling fitting forflexibility
• Supplied with drum cover and a 5kg plastic grease bucket• Suitable for use grease up to NGLI 2
Stock No.43959EX. VAT INC VAT
List Price €297.19 List Price €359.60
*TSP €151.00 *TSP €182.71
GG5
300mm FLEXIBLEDELIVERY TUBE
EX. VAT INC VATList Price €8.52 List Price €10.31
*TSP €5.70 *TSP €6.90
GG6
300mm FLEXIBLEDELIVERY TUBE
EX. VAT INC VATList Price €5.52 List Price €6.68
*TSP €3.50 *TSP €4.24
Stock No.57841• High pressure reinforced
rubber tube threaded 1/4” BSP
at both ends to fit most
grease guns
Stock No.12750• High pressure thermoplastic
tube, threaded 1/8” BSP at both
ends to fit most grease guns• Safe working pressure400bar/5800psi
• Threaded 1/8” BSPT
W2tools-4 EUR 9/9/11 13:00 Page 63
64
GNA-M
70 ASSORTED METRIC GREASENIPPLES• Contents (approx.): 20 x M6 straight; 10 x M6 90°; 15 x
M8 straight; 5 x M8 90°; M10 straight; 10 x M10 90°• EN-1A steel with profiles to BS, SAE, DIN. JIS and IS• Heat treated to SAE J534 and hardened• Yellow zinc plated to ASTM B117 specification
Stock No.43962EX. VAT INC VAT
List Price €28.30 List Price €34.24
*TSP €15.00 *TSP €18.15
Stock No.43961EX. VAT INC VAT
List Price €27.96 List Price €33.83
*TSP €15.00 *TSP €18.15
FORCE FEED OIL CANS• Supplied with flexible and
interchangeable rigid spout
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
21716 125ml €9.12 €11.04 €5.98 €7.2321717 200ml €9.41 €11.38 €6.30 €7.6221718 300ml €10.70 €12.95 €6.90 €8.3521719 500ml €13.10 €15.86 €8.35 €10.1021720 700ml €14.59 €17.66 €9.00 €10.89
MEASURING JUGS• Resistant to diesel/petrol, oils and most acids• Flexible spout with carrying handle and screw top lid.• Metric and US imperial graduations on jug body
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
43963 1L €7.49 €9.06 €4.75 €5.7543964 3L €11.38 €13.76 €6.60 €7.9943965 5L €17.54 €21.23 €9.55 €11.56
BP/L
LEVER ACTIONBARREL PUMP• For use with steel barrels
capacity 100- 205L max• Telescopic suction tube
(supplied) to reach bottomof barrel
• For use with petroleum-based liquids only
Stock No.47808EX. VAT INC VAT
List Price €43.80 List Price €53.00
*TSP €23.40 *TSP €28.31
TWIN LEG REVERSIBLE PULLERS• For external and internal pulling of gears,
bearings, etc
Stock Max. Max. List Price List Price *TSP *TSPNo. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT
13906 65mm 75mm €20.57 €24.89 €11.95 €14.4613907 102mm 110mm €24.29 €29.39 €15.25 €18.4543923 165mm 160mm €43.97 €53.20 €25.98 €31.44
TRIPLE LEG REVERSIBLE PULLERS• Three reversible legs for external and internal pulling
of gears, bearings, etc
Stock Max. Max. List Price List Price *TSP *TSPNo. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT
13908 65mm 75mm €27.65 €33.45 €17.95 €21.7213909 102mm 110mm €35.09 €42.46 €19.15 €23.1743949 165mm 160mm €55.94 €67.69 €31.15 €37.69
TWIN/TRIPLE REVERSIBLE PULLERS• Three reversible legs for internal and external pulling
Stock Max. Max. List Price List Price *TSP *TSPNo. Reach Spread ex. VAT Inc. VAT ex. VAT Inc. VAT
25994 78mm 100mm €46.08 €55.76 €25.80 €31.2256177 150mm 100mm €46.85 €56.69 €26.95 €32.61
twin/triple leg pullersLegs are forged carbonsteel and have long andshort reach facility
GNA-BSPT
50 ASSORTED BSPT GREASENIPPLES• Contents (approx.): 10 x 1/4” BSPT straight; 5 x 1/4”
BSPT 45°; 5 x 1/4” BSPT 90°; 20 x 1/8” BSPT straight; 5x 1/8” BSPT 45°; 5 x 1/8” BSPT 90°
• EN-1A steel with profiles to BS, SAE, DIN. JIS and IS• Heat treated to SAE J534 and hardened• Yellow zinc plated to ASTM B117 specification
W2tools-4 EUR 9/9/11 13:00 Page 64
*Typical Selling Price - may vary in-store. 65
IBP1
SMALL INSERT BEARING PULLER• Expert Quality• Allows the removal of bearings where normal pullers
are unable to be used• Locks into the bearing race itself• Manufactured from hardened and tempered steels
chemically blacked for corrosion protection• Suitable for use with ISO bearing sizes: 6004-6010;
6299-6205 and 6300-6302. Packed in blow mouldedcase with display sleeve
Stock No.43137EX. VAT INC VAT
List Price €71.57 List Price €86.60
*TSP €41.25 *TSP €49.91
IPB2
LARGE INSERT BEARING PULLER• Expert Quality• Allows the removal of bearings where normal pullers
are unable to be used• Locks into the bearing race itself• Manufactured from hardened and tempered steels
chemically blacked for corrosion protection• Suitable for use with ISO bearing sizes: 6207-6011;
6305-6308 and 6403-6405
Stock No.43136EX. VAT INC VAT
List Price €110.38 List Price €133.55
*TSP €57.90 *TSP €70.06
PWPK3
V-BELT PULLEY WHEEL REMOVALSET• Expert Quality• Contents: small straight leg puller: max. reach 20mm;
max spread 110mm; large straight leg puller: max.reach 35mm; max spread 200mm; 2 cranked puller legs(can be used with either yoke)
• For the removal of V-belt pulley wheels• Sculpted grooves on face of puller allow the legs to lock
on to outer circumference of the V-belt for easy removal
Stock No.30805EX. VAT INC VAT
List Price €212.76 List Price €257.44
*TSP €110.95 *TSP €134.25
BRK
9 PIECE BLIND BEARINGREMOVAL KIT
• Expert Quality• Contents: slide hammer 390mm long and eight
expandable split collets size: 8, 10, 12, 15, 17, 20, 25and 30mm diameter
• For pulling bearings from a blind hole in an engine ortransmission case
• Saves time and frustration in pulling bearings that areaccessible from only one side and cannot be pushedout
Stock No.04470EX. VAT INC VAT
List Price €207.60 List Price €251.20
*TSP €128.40 *TSP €155.36
BPK24
BEARING, SEAL AND BUSHINSERTION/EXTRACTION KIT• Expert Quality• For the accurate and controlled insertion/removal of
normal bearings, silent bearings, hydraulic bearings,rubber bearings, bearing bushes, shaft seals etc.
• Comprises 20 adaptor rings and four fine thread pullerbars with hex. nut ends.
Stock No.30816EX. VAT INC VAT
List Price €614.98 List Price €744.12
*TSP €326.35 *TSP €394.88
AFWPS1
13 PIECE ALTERNATOR PULLEY TOOLKIT• Expert Quality• For the removal of alternators and freewheel pulleys
either on or off the engine of most popular Europeancar marques
Stock No.09538EX. VAT INC VAT
List Price €65.83 List Price €79.66
*TSP €38.95 *TSP €47.13
HPK
10 TONNE HYDRAULIC PULLER KIT• Six position multi-function puller with adjustable two or
three leg function• Allows bearings, gears etc to be removed with minimal
effort by the use of the hydraulic puller• Min/Max Reach: 0 - 150mm• Min/Max Spread: 100 - 240mm
Stock No.50094EX. VAT INC VAT
List Price €163.46 List Price €197.79
*TSP €86.98 *TSP €105.25
1500kg COIL SPRING COMPRESSOR• Expert Quality • Designed for safe and effective compression of suspensionsprings to allow removal and replacement of the damper units • A safety cage isavailable separately for minimizing the risk when working on suspension systemsservicing (Stock No. 03053).
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
03054 Compressor €472.51 €571.74 €435.00 €526.3503053 Safety Cage €245.71 €297.31 €192.00 €232.32
Manufacturedfrom high qualityrobust materialsfor longevity
Supplied with two jaw sets size80-145mm and 145-195mm
Features safety overloadsystem to protect userand spring compressor
picture above showscoil spring compressor insafety cage (safety cage
sold separately)
coil spring compressors
W2tools-4 EUR 9/9/11 13:00 Page 65
66
N144
2 PIECE COIL SPRING COMPRESSORSET• Length: 250mm• Capacity: 190mm• Hooks manufactured from tension ductile iron with
galvanized finish
Stock No.14173EX. VAT INC VAT
List Price €36.50 List Price €44.17
*TSP €19.15 *TSP €23.17
N152
2 PIECE COIL SPRING COMPRESSORSET• Suitable for most cars and light vans• Hardened and tempered carbon steel lead screws• Wrap around cast jaws for extra safety• Ideal for use in confined spaces
Stock No.68615EX. VAT INC VAT
List Price €36.50 List Price €44.17
*TSP €19.15 *TSP €23.17
N145
2 PIECE COIL SPRING COMPRESSORSET• 90-200mm capacity• Forged carbon steel claws hardened and tempered with
M16 x 15mm screw
Stock No.31497EX. VAT INC VAT
List Price €52.20 List Price €63.16
*TSP €29.40 *TSP €35.57
N142
UNIVERSAL HUB PULLER• For use on four stud wheels• Bolt centres 100-115mm
Stock No.13916EX. VAT INC VAT
List Price €12.26 List Price €14.84
*TSP €7.15 *TSP €8.65
N140
BALL JOINT SEPARATOR• Jaw opening 19mm, maximum opening capacity 38mm • Length: 140mm
Stock No.13914EX. VAT INC VAT
List Price €26.26 List Price €31.77
*TSP €14.10 *TSP €17.06
N143
FORK TYPE BALLJOINT SEPARATOR• Jaw opening 19mm and throat
depth 70mm• Length 200mm
Stock No.14159EX. VAT INC VAT
List Price €14.59 List Price €17.66
*TSP €7.80 *TSP €9.44
N148
FORK TYPE BALLJOINT SEPARATOR• Jaw opening 19mm and throat
depth 70mm• Length 400mm
Stock No.38859EX. VAT INC VAT
List Price €18.55 List Price €22.45
*TSP €10.50 *TSP €12.71
CVBK3
3 PIECE CV BOOT SERVICE KIT• Expert Quality• Contents: 200mm precision CV boot band cutters
for use on CV bands up to 6mm wide; 225mm CVband cutting tool; 240mm CV pliers for tighteningear-type CV bands
• Reinforced 1/2” sq. dr. recesses in handle for the useof a breaker bar/ torque wrench where specifictorque is required
Stock No.30784EX. VAT INC VAT
List Price €92.16 List Price €111.51
*TSP €52.25 *TSP €63.22
Stock No.04472EX. VAT INC VAT
List Price €71.88 List Price €86.97
*TSP €42.60 *TSP €51.55
PJSK
PINCH JOINT SPLITTER KIT
• Expert Quality• For precise and controlled spreading of pinch
joint/bolt on most vehicles• Fully adjustable to allow use with offset centre
pinch points
steering &suspension
W2tools-4 EUR 9/9/11 13:00 Page 66
*Typical Selling Price - may vary in-store. 67
PW5A
FOUR WAY WHEEL NUT WRENCH• Heavy duty forged four way wheel nut wrench • Sizes:17 x 19 x 21 x 22mm
Stock No.36005EX. VAT INC VAT
List Price €12.29 List Price €14.87
*TSP €7.43 *TSP €8.99
WM17/19
EXTENDING WHEELNUT WRENCH
Stock No.19152EX. VAT INC VAT
List Price €26.62 List Price €32.21
*TSP €15.95 *TSP €19.30
LWNS4
4 PIECE LOCKING WHEEL NUT SET• Expert Quality• For the removal of locking wheel nuts on most vehicles
(except those fitted with rotating protector shrouds)• Molybdenum steel, hardened, tempered and chemically
blacked for corrosion protection• Reduce tapered internal left hand coarse thread
Stock No.89766EX. VAT INC VAT
List Price €40.49 List Price €48.99
*TSP €22.50 *TSP €27.23
TL
450mm TYRE LEVERS• Pair of tyre levers hot forged from
EN8 steel hardened, temperedand zinc plated
Stock No.31495EX. VAT INC VAT
List Price €29.93 List Price €36.21
*TSP €17.40 *TSP €21.05
TG1
DIGITAL TYRE TREAD DEPTH GAUGEWITH PLASTIC BODY
Stock No.39590EX. VAT INC VAT
List Price €16.46 List Price €19.92
*TSP €9.00 *TSP €10.89
TG2
DIGITAL TYRE TREAD DEPTH GAUGEWITH STAINLESS STEEL BODY
Stock No.39591EX. VAT INC VAT
List Price €34.90 List Price €42.22
*TSP €17.95 *TSP €21.72
TG92
TYRE TREAD DEPTH GAUGE• Accepted in the UK by the Department of Transport
for MOT Testing• Fast and easy-to-read measurement of tyre tread
depth from 1-26mm in one millimetre graduationson sliding barrel
• Includes a 1.6mm graduation to complywith MoT minimum tyre treaddepth requirement
• Plated steel bodywith pocket clip
Stock No.27298EX. VAT INC VAT
List Price €5.52 List Price €6.68
*TSP €3.60 *TSP €4.36
TPG100A
TYRE PRESSURE GAUGE• Manufactured to EN12645:1998 Standard• Hand-held dual reading gauge with flexible hose
250mm long• Swivel angled tyre connection with air release valve• Large easy-to-read scale graduated 5-100psi in
increments of two psi and 0.5-6bar in increments of 0.1bar
Stock No.69924EX. VAT INC VAT
List Price €17.21 List Price €20.82
*TSP €10.54 *TSP €12.75
31K
TYRE PRESSURE GAUGE• Expert Quality• Dual reading graduated 6-50 psi in increments of one
psi and 0.4-3.4 bar in increments of 0.1 bar• Manufactured to BS4613 Part 3 Specification• In line feature allows access to
awkwardly positioned tyre valves• Valve remover and
pocket clip
Stock No.26443EX. VAT INC VAT
List Price €11.98 List Price €14.49
*TSP €8.10 *TSP €9.80
30K
TYRE PRESSURE GAUGE• Manufactured to BS4613 Part 3 Specification• Dual reading pencil type, graduated
6-50 psi in increments of one psi and0.4-3.4 bar in increments of 0.1 bar
• Includes tyre valve remover
Stock No.74308EX. VAT INC VAT
List Price €11.98 List Price €14.49
*TSP €8.15 *TSP €9.86
Metric and imperial calibration withconversion between the two. Zerosetting control allows for comparativemeasurement. Clear LCD for easyreading. Supplied with SR44 battery.
• Measuring range 0-25mm/0-1”;resolution 0.1mm/0.0005”;accuracy ±0.01mm/0.000
• Expert Quality• Measuring range 0-25mm/0-1”;
resolution 0.05mm/0.0005”;accuracy ±0.01mm/0.000
tyre treaddepth gauges
• Supplied with two 1/2” sq. drivereversible sockets size 17 x 19and 21 x 22mm
• Handle extends to 525mmwhich helps to increasetorque on difficultwheel nuts
W2tools-4 EUR 9/9/11 13:00 Page 67
68
Stock No.41921EX. VAT INC VAT
List Price €6.26 List Price €7.58
*TSP €4.20 *TSP €5.08
Stock No.41925EX. VAT INC VAT
List Price €6.24 List Price €7.55
*TSP €4.20 *TSP €5.08
Stock No.41922EX. VAT INC VAT
List Price €6.02 List Price €7.29
*TSP €4.20 *TSP €5.08
Stock No.76108EX. VAT INC VAT
List Price €7.39 List Price €8.94
*TSP €4.75 *TSP €5.75
Stock No.76110EX. VAT INC VAT
List Price €5.93 List Price €7.17
*TSP €3.75 *TSP €4.54
MR-DS
400ml Mr D’s MOISTUREDISPERSANT (D)• Dual purpose moisture and penetrating oil, suitable
for dispersing moisture from electrical systems andas a general lubricating and penetrating oil
ARE-CCL/A
400ml CARBURETTOR ANDINJECTOR CLEANER (C)• Ideal for cleaning carburettors and and brake parts• Helps prevent stalling and rough idling
ARE-BCL/A
400ml BRAKE AND CLUTCHCLEANER (E)• Ideal for cleaning all parts of modern brake and
clutch systems • Eliminates brake squeal and clutch slip caused by
contamination and glazing
ACC-DEG
400ml DEGREASER (F)• Ideal for use in vehicle engines to remove grease and
dirt from metal surfaces
ARE-LEAK
400ml LEAK DETECTOR (G)• For detecting leaks in gas piping, refrigerator coolant
pipes, vehicle air conditioning units, workshop airlines etc. • When sprayed, any leaks and their severityare betrayed by bubbles within the surface tension ofthe fluid
DC E F
A
G
cleaners/lubricants/renovators...High quality aerosols for cleaning, lubricating and renovating vehicles of all shapes and sizes.
ARE-ACC
150ml VEHICLE AIR CONDITIONINGCLEANER (B)• A quick and easy way to clean and refresh vehicle air
conditioning systems in minutes• Kills bacteria present in the air conditioning unit.• Aerosol can is placed in footwell of vehicle, air
conditioning is turned on ‘internal circulation’ and canlocked on and completely discharged whilst airconditioning is working
Stock No.76107EX. VAT INC VAT
List Price €10.30 List Price €12.46
*TSP €6.55 *TSP €7.93
Stock No.41919EX. VAT INC VAT
List Price €6.31 List Price €7.64
*TSP €4.20 *TSP €5.08
ARE-DBR/A
400ml DASHBOARDRENOVATOR• Restores internal trims and
dashboards, cleans and polishesvinyl leather and wood back to asparkling appearance
• Will remove oil and stains• Can be used as a non-staining
lubricant on windows, doors,hinges and locks
B
W2tools-4 EUR 9/9/11 13:00 Page 68
*Typical Selling Price - may vary in-store. 69
LG-100
BOX OF 100 LATEX GLOVES• 100% pure latex starch-powdered for easy pull-on• Ambidextrous fit-one size (large)
Stock No.54780EX. VAT INC VAT
List Price €13.39 List Price €16.20
*TSP €7.98 *TSP €9.65
NG-100
BOX OF 100 NITRILE GLOVES• All-purpose glove ideal for use as a
barrier layer• Gloves have the puncture
resistance of latex• Guaranteed free from
allergenic latex proteinsso can be used bypersonnel with an allergyto latex
• Low stress properties reduce hand fatigue• EN455 Parts 1, 2 & 3 and EN374 Parts 2 and 3
Specifications
Stock No.41400EX. VAT INC VAT
List Price €15.22 List Price €18.41
*TSP €9.91 *TSP €11.99
Stock No.72878EX. VAT INC VAT
List Price €13.20 List Price €15.97
*TSP €8.35 *TSP €10.10
Stock No.56381EX. VAT INC VAT
List Price €17.71 List Price €21.43
*TSP €10.20 *TSP €12.34
O-RING/419
419 PIECE O-RING ASSORTMENT• Assortment of popular size O-rings
Stock No.56345EX. VAT INC VAT
List Price €39.67 List Price €48.00
*TSP €20.35 *TSP €24.62
Stock No.56377EX. VAT INC VAT
List Price €16.20 List Price €19.60
*TSP €10.20 *TSP €12.34
Stock No.56375EX. VAT INC VAT
List Price €17.33 List Price €20.97
*TSP €9.50 *TSP €11.50
Stock No.56379EX. VAT INC VAT
List Price €24.70 List Price €29.88
*TSP €15.60 *TSP €18.88
Stock No.56378EX. VAT INC VAT
List Price €17.66 List Price €21.37
*TSP €10.75 *TSP €13.01
O-RING/225
225 PIECE O-RING ASSORTMENT• Assortment of popular size O-rings
CIRCLIP/285
285 PIECE INTERNAL AND EXTERNALCIRCLIP ASSORTMENT• Assortment of internal and external circlips in plastic
storage case.
WASHER/720
720 PIECE SPRING AND STARWASHER ASSORTMENT• Assortment of spring, internal and external star
washers in plastic storage case
HST95
95 PIECE HEAT SHRINK TUBEASSORTMENT• For sealing automotive
electrical connections• To be used in
conjunction withhot air guns
COTTER/555
555 PIECE SPLIT PIN ASSORTMENT• Assortment of popular size split pins
assorted assortments !Useful, reliableconsumables formany automotiveand industrialapplications.
FUSE/120
120 PIECE AUTOMOTIVE FUSEASSORTMENT• 20 pieces (approx) of colour fuses 5A, 10A, 15A, 20A,
25A and 30A
W2tools-4 EUR 9/9/11 13:00 Page 69
70
E-CLIP/300
300 PIECE E-CLIP ASSORTMENT• 300 (approx) popular metric sized E-Clips• Plastic storage case
Stock No.63941EX. VAT INC VAT
List Price €20.93 List Price €25.32
*TSP €13.15 *TSP €15.91
Stock No.56376EX. VAT INC VAT
List Price €23.76 List Price €28.75
*TSP €14.35 *TSP €17.36
Stock No.56380EX. VAT INC VAT
List Price €17.57 List Price €21.26
*TSP €10.20 *TSP €12.34
ROLL/120
120 PIECE ROLL PIN ASSORTMENT• Popular imperial sized roll pins• Plastic storage case
Stock No.63943EX. VAT INC VAT
List Price €12.34 List Price €14.93
*TSP €7.50 *TSP €9.08
WWB1
FLOW THROUGHTELESCOPIC WASHINGBRUSH
Stock No.74190EX. VAT INC VAT
List Price €36.43 List Price €44.08
*TSP €19.96 *TSP €24.15
50mm WIDE HEAVY DUTYRATCHET TIE DOWNSTRAPS WITH D RINGS• Quality polyester webbing with D rings• S.W.L.2500kg (breaking strain 5000kg)
per strap
Stock List Price List Price *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
49485 5M 2500kg €25.82 €31.25 €14.10 €17.0649486 8M 2500kg €31.34 €37.93 €17.40 €21.0549487 10M 2500kg €35.35 €42.78 €20.10 €24.32
50mm WIDE HEAVY DUTYRATCHET TIE DOWNSTRAPS WITH HOOKS• Quality polyester webbing with hooks• S.W.L.2500kg (breaking strain 5000kg)
per strap
Stock List Price List Price *TSP *TSPNo. Length Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
49488 5M 2500kg €26.76 €32.38 €15.00 €18.1549489 8M 2500kg €32.54 €39.38 €18.97 €22.9549490 10M 2500kg €36.14 €43.73 €20.99 €25.40
RATCHET TIE DOWNSTRAPS• Quality webbing• Two hooks• Proof load Stock Nos. 64216-750kg;
64217-1000kg; 64218-2000kg
Stock List Price List Price *TSP *TSPNo. Length/Width ex. VAT Inc. VAT ex. VAT Inc. VAT
64216 4.5M/25mm €10.18 €12.31 €6.90 €8.3564217 5.4M/50mm €34.27 €41.47 €22.20 €26.8664218 8.0M/50mm €47.45 €57.41 €29.40 €35.57
BCADJ1000
200-1000mm ADJUSTABLE LENGTHELASTIC STRAPS
Stock No.89201EX. VAT INC VAT
List Price €7.92 List Price €9.58
*TSP €5.40 *TSP €6.53
ratchet tie down strapsKeep that load safe with our ratchet tie down straps- three lengths available to suit many applications.
HAIRP/150
150 PIECE R-CLIP ASSORTMENT• 150 pieces (approx) of popular size R-clips
SPRING/200
200 PIECE COMPRESSION ANDEXTENSION SPRING ASSORTMENT• 92 (approx) compression springs• 108 (approx) extension springs
• Powerful elastic strapsmanufacturedfrom virginrubber withadjustablelengthlocking hooks
• Lashing capacity 27kg• For cleaning vehicles,
paintwork, conservatories etc• Has on/off water control
feature and snap-on connector• Extends from 1.2 to 1.8M
W2tools-4 EUR 9/9/11 13:00 Page 70
*Typical Selling Price - may vary in-store. PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. *Pozidriv®/Supadriv® are registered trademarks of Trifast Plc. 71
VDESET110 PIECE VDE APPROVED FULLYINSULATED PLIERS ANDSCREWDRIVERS SET• Expert Quality• Contents: Combination Pliers, Long Nose Pliers, Diagonal
Side Cutters, 3 plain slot screwdrivers, 2 cross slotscrewdrivers and 2 PZ TYPE screwdrivers
• Fully insulated handle and blade sheath for total safety(screwdrivers)
• Tested to 10kV, suitable for working on live circuits of1kV AC and 1.5kV DC
• Conforms to EN 60900:2004, DIN 7437 and 7438• Chrome vanadium steel blades hardened, tempered and
chemically blacked
Stock No.71155EX. VAT INC VAT
List Price €108.65 List Price €131.46
*TSP €54.50 *TSP €65.95
HEAVY DUTY SOFT GRIPCOMBINATION PLIERS• Expert Quality
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
68883 160mm €16.75 €20.27 €14.98 €18.1368884 180mm €17.71 €21.43 €15.95 €19.3068885 200mm €18.89 €22.85 €16.98 €20.55
HEAVY DUTY SOFT GRIPLONG NOSE PLIERS• Expert Quality
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
68887 160mm €15.77 €19.08 €14.25 €17.2468888 200mm €17.04 €20.62 €15.35 €18.57
36BNBN200mm HEAVY DUTY SOFT GRIPBENT NOSE PLIERS• Expert Quality
Stock No.68889EX. VAT INC VAT
List Price €18.89 List Price €22.85
*TSP €16.99 *TSP €20.55
HEAVY DUTY SOFT GRIPDIAGONAL SIDE CUTTERS• Expert Quality
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
68890 130mm €16.06 €19.43 €14.50 €17.5568891 160mm €17.04 €20.62 €15.35 €18.5769264 180mm €18.89 €22.85 €16.98 €20.55
79BSUN150mm HEAVY DUTY SOFT GRIPWIRE STRIPPING PLIERS• Expert Quality
Stock No.68894EX. VAT INC VAT
List Price €17.04 List Price €20.62
*TSP €15.35 *TSP €18.57
4004250mm HEAVY DUTY SOFT GRIPWATERPUMP PLIERS• Expert Quality• 40mm capacity• Seven position
jaw adjustment
Stock No.89901EX. VAT INC VAT
List Price €18.46 List Price €22.33
*TSP €16.65 *TSP €20.15
10713 PIECE HEAVY DUTY SOFT GRIPPLIERS SET• Expert Quality• Contents: Combination Pliers, Long Nose Pliers and
Diagonal Side Cutters
Stock No.69289EX. VAT INC VAT
List Price €48.05 List Price €58.14
*TSP €27.48 *TSP €33.25
heavy dutyDraper ExpertpliersAll products on this page are ExpertQuality. They are manufactured fromchrome vanadium steel fullyhardened and tempered withinduction hardened edges andslip guards for extra safety.
• ‘No nip’ feature preventshandles locking togetherand damaging users hands
pliers & screwdriver set
W2tools-4 EUR 9/9/11 13:01 Page 71
72
2/36ALG2 PIECE LONG REACH LONG NOSEPLIERS SET• Contents: Long Reach Long
Nose Pliers and Bent NoseLong Reach Long NosePliers with 45° jaws
• PVC dippedhandles
Stock No.69287EX. VAT INC VAT
List Price €27.31 List Price €33.05
*TSP €16.20 *TSP €19.60
4001A400mm CUSHION GRIPWATERPUMP PLIERS• Expert Quality• Capacity: 110mm• ‘no-nip’ feature which prevents handles locking
together when at largest capacity anddamaging users’ hands
• 11 position groovejoint jaw
Stock No.52408EX. VAT INC VAT
List Price €37.44 List Price €45.30
*TSP €21.50 *TSP €26.02
49/44 PIECE CIRCLIP PLIERS SET• Contents: 2 x straight
and 2 x 90° tips• Capacity
19-60mm
Stock No.38999EX. VAT INC VAT
List Price €70.99 List Price €85.90
*TSP €40.00 *TSP €48.40
9006/33 PIECE CURVEDJAW SELF GRIPPLIERS SET
Stock No.14040EX. VAT INC VAT
List Price €33.98 List Price €41.12
*TSP €14.87 *TSP €17.99
Stock List Price List Price *TSP *TSPNo. Length x Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
54264 Cutter-300mm/4mm €35.98 €43.53 €18.60 €22.5154265 Cutter-350mm/5mm €43.25 €52.33 €20.35 €24.6254266 Cutter-450mm/6mm €60.38 €73.06 €22.52 €27.2554267 Cutter-600mm/8mm €77.69 €94.00 €24.50 €29.6554268 Jaws-300mm/4mm €24.58 €29.74 €13.15 €15.9154269 Jaws-350mm/5mm €28.06 €33.95 €15.00 €18.1554270 Jaws-450mm/6mm €32.45 €39.26 €17.40 €21.0554271 Jaws-600mm/8mm €41.40 €50.09 €19.80 €23.96
CT-K/PRO220mm RATCHET CRIMPING KIT• Expert Quality• Ratchet action ensures continuous operation• 590 (approx) assorted insulated crimping terminals
included • Metal storage case
Stock No.56383EX. VAT INC VAT
List Price €119.28 List Price €144.33
*TSP €66.07 *TSP €79.94
CT5240mm 5 WAYCRIMPING TOOL
Stock No.13656EX. VAT INC VAT
List Price €9.34 List Price €11.30
*TSP €5.95 *TSP €7.20
2850250mm COMPOUND ACTIONTINMANS (AVIATION) SHEARS• Expert Quality• Straight cut chrome molybdenum steel compound
action blades which increase leverage,serrated for extra grip • Straight cut
Stock No.49905EX. VAT INC VAT
List Price €15.38 List Price €18.61
*TSP €9.00 *TSP €10.89
• Capacity 1.2mm mild steel,1.5mm aluminium and0.8mm stainless steel
• Chrome nickel steel hardened andtempered with a polished finishand chemically blacked tips
bolt cutters• For cutting high tensile
material up to 40HRC• Centre cut jaw pattern
• Crimps insulated and non-insulated terminals
• Wire cutting• Wire stripping up to 6mm• Shears bolts up to 5mm
• Forged carbon steel correctlyhardened and tempered withcutting edges additionallyinduction hardened
• Serrated tapering jaws allowwork in confined spaces
• Contents: 140, 190 and220mm long • Serrated
gripping surfaces andadjustable opening with
quick release lever
Draper Tools is notresponsible for the contentof other companieswebsites
Poole PiratesDraper Tools are proud to sponsor the Poole Pirates inSpeedway’s Elite League.
The riders rely on theirmechanics,... their mechanicsuse and rely on Draper Tools
Go to the Poole Pirates website:
www.poolespeedway.net
for full information onPoole Speedway.
W2tools-4 EUR 9/9/11 13:01 Page 72
*Typical Selling Price - may vary in-store. PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. *Pozidriv®/Supadriv® are registered trademarks of Trifast Plc. 73
3250mm HAND NIBBLER• Expert Quality• Cuts sheet metal up to 1.2mm thickness and laminates
and plastics up to 2mm• For cutting a wide variety of materials
cleanly without bendingor distortion
Stock No.35748EX. VAT INC VAT
List Price €20.26 List Price €24.51
*TSP €12.60 *TSP €15.25
270ARIVETER• Expert Quality• Four nozzles to accept 2.4, 3.2, 4.0 and 4.8mm
aluminium alloy, stainless steeland steel blind rivets
• Single pull actiondesigned for fastrepetitiveapplications
Stock No.13701EX. VAT INC VAT
List Price €78.24 List Price €94.67
*TSP €36.98 *TSP €44.75
269ALONG ARM RIVETER• Expert Quality• Accepts 3.2, 4.0 and 4.8mm aluminium
alloy, stainless steel and steel blind rivets• Compound action high leverage
Stock No.36290EX. VAT INC VAT
List Price €57.22 List Price €69.23
*TSP €33.50 *TSP €40.54
Stock No.19782EX. VAT INC VAT
List Price €33.17 List Price €40.13
*TSP €16.75 *TSP €20.27
450mm EXTRA LONG PATTERN GENERAL PURPOSE SCREWDRIVERS• Expert Quality• Polymer vulcanized ‘soft grip’ rubber handle, colour coded for easy recognition• Chrome vanadium steel blades hardened, tempered with satin chrome plated finish with sand blasted tips• The long length is ideal for use on vehicle radiator hose clips
Stock List Price List Price *TSP *TSPNo. Blade ex. VAT Inc. VAT ex. VAT Inc. VAT
40802 P/Slot 6.0mm €10.82 €13.10 €6.30 €7.6240803 C/Slot No.2 €10.82 €13.10 €6.30 €7.62
980/66 PIECE ‘POUND THRU’SCREWDRIVER SET• Expert Quality• Contents: 2 plain slot, 2 cross slot and 2 PZ TYPE• Hexagonal section chrome vanadium steel blades
hardened, tempered and satin chrome plated finishwith sand blasted tips
• Handles are ‘soft grip’ polymer vulcanized withrooted cap allowing handle to be struck withoutcausing damage
• Colour coded handles for easy recognition
Stock No.40005EX. VAT INC VAT
List Price €38.74 List Price €46.87
*TSP €19.96 *TSP €24.15
990/1616 PIECE ENGINEERS SCREWDRIVERSET• Expert Quality• Contents: 7 plain slot; 4 cross slot; 5 PZ TYPE• The generous size colour coded handles are
manufactured from high quality transparent PVC• Chrome vanadium steel blades hardened, tempered
with satinchrome platedfinish withsand blastedtips
• Colourcodedhandlesfor easyrecognition
Stock No.43571EX. VAT INC VAT
List Price €73.82 List Price €89.33
*TSP €38.51 *TSP €46.60
general purposescrewdrivers
268AKTWO WAY RIVETER KIT• General duty • Accepts 2.4, 3.2, 4.0 and 4.8mm
aluminium alloy blind rivets • 90° or 180° operation
W2tools-4 EUR 9/9/11 13:01 Page 73
74
MECHANICS PATTERN PLAIN SLOT SCREWDRIVERS
Stock List Price List Price *TSP *TSPNo. Tip Length ex. VAT Inc. VAT ex. VAT Inc. VAT
19527 5.0mm 75mm €3.43 €4.15 €3.10 €3.7519539 6.0mm 38mm €3.14 €3.80 €2.85 €3.4519529 6.0mm 100mm+ €4.49 €5.43 €3.98 €4.8219530 8.0mm 150mm+ €5.98 €7.23 €5.40 €6.5319531 9.5mm 200mm+ €7.75 €9.38 €6.98 €8.45
MECHANICS PATTERN CROSS SLOT SCREWDRIVERS
Stock List Price List Price *TSP *TSPNo. Tip Length ex. VAT Inc. VAT ex. VAT Inc. VAT
19540 No.1 38mm €3.14 €3.80 €2.85 €3.4519532 No.1 75mm €3.14 €3.80 €2.85 €3.4519541 No.2 38mm €3.14 €3.80 €2.85 €3.4519533 No.2 100mm+ €4.68 €5.66 €4.20 €5.0819534 No.3 150mm+ €6.62 €8.02 €5.95 €7.20
MECHANICS PATTERN PZ TYPE SCREWDRIVERS
Stock List Price List Price *TSP *TSPNo. Tip Length ex. VAT Inc. VAT ex. VAT Inc. VAT
19542 No.1 38mm €3.14 €3.80 €2.85 €3.4519535 No.1 75mm €3.14 €3.80 €2.85 €3.4519543 No.2 38mm €3.14 €3.80 €2.85 €3.4519537 No.2 100mm+ €4.68 €5.66 €4.25 €5.1419538 No.3 150mm+ €6.41 €7.75 €5.75 €6.96
939/1111 PIECE MECHANICS PATTERNSCREWDRIVER SET• Contents: 5 plain slot, 3 cross slot and
3 PZ TYPE• Square matt black handles manufactured
from high impact resistant plastic• Satin chrome plated chrome vanadium
steel blades hardened tempered withsand blasted tips
Stock No.27030EX. VAT INC VAT
List Price €40.63 List Price €49.16
*TSP €20.04 *TSP €24.25
Stock No.50809EX. VAT INC VAT
List Price €27.26 List Price €32.99
*TSP €16.75 *TSP €20.27
2800/1012 PIECE IMPACT SCREWDRIVERSET• Expert Quality• Removes stubborn fasteners through impact• Forward/reverse rotation and impact absorbing hand
grip• Bit holder can be removed to use 1/2” sq dr socket with
impact sockets• Contents: adaptor, 2 plain slot bits, 2 cross slot bits, 2
PZ TYPE bits and 4 Draper TX- STAR bits
Stock No.22322EX. VAT INC VAT
List Price €26.35 List Price €31.89
*TSP €15.99 *TSP €19.35
mechanics patternscrewdriversThese mechanics pattern screwdrivers havesquare matt black handles manufactured fromhigh impact resistant plastic. The blades aresatin chrome plated chrome vanadium steelhardened tempered with sand blasted tips+hexagon bolster on handle
PS141111 PIECE PRECISION SCREWDRIVERSET• Expert Quality• Contents: 2 plain slot, 2 cross slot, 2 PZ TYPE and 5
Draper TX-STAR• Nylon handles with revolving tops• Supplied with wall rack
W2tools-4 EUR 9/9/11 13:01 Page 74
87 01EKNIPEX 250mm COBRAWATERPUMP PLIERS • Expert Quality• Eleven position adjustment and parallelogram-shaped
gripping surfaces for positive grip on pipes and nuts• Has ‘no-nip’ feature which prevents handles locking
together and damaging users’ hands• 25 jaw positions• Capacities: 51mm nuts (O/D);
46mm across flats
88 01KNIPEX 250mm ALLIGATORWATERPUMP PLIERS• Expert Quality• Nine position adjustment and parallelogram-shaped
gripping surfaces for positive grip on pipes and nuts• Plastic coated handles with slip guards for extra safety• ‘No-nip’ feature which prevents handles locking
together and damaging users’ hands• Nine jaw positions• Capacities: 50mm nuts (O/D);
46mm across flats
86 03KNIPEX 250mm PLIERWRENCH• Expert Quality• Ratchet action for speed fastening
on nuts and unions• Capacity: 46mm across flats
professional quality - made in germany
pliers and plier wrenchYou can rely on these pliers - they won’t fail - even under the toughest working conditions!
*Typical Selling Price - may vary in-store. PZ TYPE products are compatible with *Pozidriv®/Supadriv® fixing systems. Draper TX-STAR products are compatible with †Torx fixing systems.*Pozidriv®/Supadriv® are registered trademarks of Trifast Plc. †Torx is the registered trademark of Camcar/Textron Inc. 75
BH2323 PIECE SCREWDRIVERAND BIT SET• Contents: screwdriver, adaptor 1/4” sq drive x 1/4”
hexagon, 4 plain slot bits, 3 cross slot bits, 3 PZ TYPEbits, 3 hexagonal bits and 7 DraperTX-STAR bits
• Chrome plated blade withpowerful 1/4” magneticbit holder
Stock No.29588EX. VAT INC VAT
List Price €25.27 List Price €30.58
*TSP €15.00 *TSP €18.15
ELKW10M10 PIECE METRIC EXTRA LONGPATTERN HEXAGON KEY SET• Expert Quality• Contents: 3-17mm• 6150 chrome vanadium steel hardened and tempered
Stock No.26939EX. VAT INC VAT
List Price €45.86 List Price €55.50
*TSP €25.00 *TSP €30.25
THEX/SG/88 PIECE SOFT GRIP ‘T’ HANDLEHEXAGON AND BALL END KEY SET• Expert Quality• 2.0, 2.5, 3.0 and 4.0mm; long leg 100mm x short leg
13mm: 5 and 6mm; long leg 150mm x short leg 15mm:8 and 10mm; long leg 200mm x short leg 14mm
• Hexagon ball end on the longblade and conventional hexagonend on the short blade
• Chrome vanadium steelhardened andtempered withsatin chrome finish
• Supplied completein a steel storagerack
Stock No.08375EX. VAT INC VAT
List Price €39.48 List Price €47.77
*TSP €25.99 *TSP €31.45
HB12AF12 PIECE IMPERIAL HEXAGON ANDBALL END HEXAGON KEY SET• Expert Quality• Contents: 1/16-3/8”• hexagon ball end on the long arm
and conventional hexagon endon the short arm
• Chrome vanadium steelhardened andtempered with achemicallyblackedfinish
• Supplied infold-out holder easyrelease holder which canbe wall-mounted
Stock No.08381EX. VAT INC VAT
List Price €19.10 List Price €23.12
*TSP €11.95 *TSP €14.46
TK235QUICK CHANGE SOFT GRIPRETRACTABLE TRIMMING KNIFE• Expert Quality• Retractable pattern complete with five two notch blades
in holder
Stock No.02888EX. VAT INC VAT
List Price €17.04 List Price €20.62
*TSP €10.21 *TSP €12.35
TK200HD/D100DISPENSER OF 100 TWO NOTCHTRIMMING KNIFE/WINDOW SCRAPERBLADES• Reversible polished steel blades with accurately ground
cutting edge• Packed in plastic
dispenser• Suitable for use
with DraperTrimming Knives andWindow Scrapers
Stock No.88629EX. VAT INC VAT
List Price €17.23 List Price €20.85
*TSP €10.75 *TSP €13.01
Stock No.13277EX. VAT INC VAT
List Price €51.12 List Price €61.86
*TSP €28.51 *TSP €34.50
Stock No.10954EX. VAT INC VAT
List Price €39.00 List Price €47.19
*TSP €21.78 *TSP €26.35
Stock No.33814EX. VAT INC VAT
List Price €109.63 List Price €132.65
*TSP €59.95 *TSP €72.54
Legal information - KnivesWARNING - Knives or other articles with a blade or sharp point must not be sold to, or purchased bypersons under age. It’s the law (Offensive Weapons Act 1996 and the Violent Crime Reduction Act 2006).
• Diecast zinc alloy body withanti-slip soft grip handle foruser comfort. Rear storagemagazine holds blades safely
W2tools-4 EUR 9/9/11 13:01 Page 75
general purpose/ball pein/soft faced/dead blow
essential hammers
76
GENERAL PURPOSE BALL PEIN HAMMERS• Forged high carbon steel head correctly
hardened and tempered• Matt black painted head with striking face, bell,
cheeks and pein polished and lacquered• Natural straight grained hickory shaft sanded and lacquered
Stock List Price List Price *TSP *TSPNo. Weight ex. VAT Inc. VAT ex. VAT Inc. VAT
64590 450g (16oz) €15.41 €18.64 €9.00 €10.8964591 680g (24oz) €18.46 €22.33 €10.99 €13.3064592 900g (32oz) €19.39 €23.46 €11.95 €14.46
6211A110g (4oz) BALL PEIN PIN HAMMER• High carbon steel head hardened and tempered with
matt black painted head and straight grained hickoryshaft
Stock No.64593EX. VAT INC VAT
List Price €11.23 List Price €13.59
*TSP €7.15 *TSP €8.65
DBH1kg (2.2lb) DEAD BLOW HAMMER• Expert Quality• For heavy and effective blows• Hollow head has steel particles which prevent rebound
Stock No.37324EX. VAT INC VAT
List Price €32.16 List Price €38.91
*TSP €17.95 *TSP €21.72
COPPER/RAWHIDE FACED HAMMERS• Expert Quality• Heavy malleable iron head fitted with a copper
and a rawhide face• Shaped wood shaft
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
20070 680g (24oz) €37.56 €45.45 €21.00 €25.4120088 1100g (38oz) €46.56 €56.34 €25.80 €31.22
20850 680g Rawhide Face €8.59 €10.40 €7.75 €9.3821826 680g Copper Face €8.26 €9.99 €7.45 €9.0121825 1100g Rawhide Face €10.90 €13.18 €9.85 €11.92
680g (24oz) SOFT FACED HAMMER• Expert Quality• Chrome plated head with screw-on faces of soft
plastic and nylon
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
72027 Hammer €29.50 €35.69 €16.75 €20.27
72028 Spare Nylon Face €5.47 €6.62 €4.95 €5.9972029 Spare Plastic Face €4.51 €5.46 €4.10 €4.96
RM/NMFG750g (26oz) FIBREGLASS SHAFTMALLET WITH NON-MARKINGRUBBER HEAD• Fibreglass shaft with shock-absorbing rubber hand grip• Non-marking head is ideal for use when using on
sensitive surfaces
Stock No.09119EX. VAT INC VAT
List Price €10.97 List Price €13.27
*TSP €7.15 *TSP €8.65
RM956450g (16oz) HARDWOOD SHAFTRUBBER MALLET• Rubber head with face diameter of 58mm
Stock No.13928EX. VAT INC VAT
List Price €6.53 List Price €7.90
*TSP €4.20 *TSP €5.08
HDS/RDSCRAPER AND ROOTDIGGER WITH WOODSHAFT• For numerous jobs including carpet
tile removal, general scraping tasks,chopping and root removal.
• Hardened sharpened blade size 230x 180mm that can re-sharpened tomaintain cutting edge
• Length: 1410mm
Stock No.05166EX. VAT INC VAT
List Price €34.68 List Price €41.96
*TSP €20.95 *TSP €25.35
W2tools-4 EUR 9/9/11 13:01 Page 76
*Typical Selling Price - may vary in-store. 77
CYB/B25/5 330mm YARDBROOM• Polypropylene/Sherbro
mix head • Supplied with wood
shaft 1370mm long x28mm dia
Stock No.88618EX. VAT INC VAT
List Price €25.99 List Price €31.45
*TSP €16.94 *TSP €20.50
RUBBER FLOOR SQUEEGEES• Handle sold separately - 28mm Draper Stock No.43787
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
43784 450mm €5.28 €6.39 €3.50 €4.2443794 600mm €6.91 €8.36 €4.50 €5.45
BRM/HANWOODEN BROOMHANDLE• Length: 1525mm, Dia.
28mm• Handle suitable for
small or large broomheads/squeegees etc.
Stock No.43787EX. VAT INC VAT
List Price €5.45 List Price €6.59
*TSP €3.50 *TSP €4.24
GHRS25M WIND-UP HOSEREEL KIT• Plastic frame with
drum and wind-uphandle
• Flow through designwith 1/2” hose connector
• Supplied with 25M of12mm hose; 3 x 1/2”hose connectors; 1/2”hose connector withwater stop feature;3/4” BSP tapconnector with 1/2”BSP reducer andadjustable spraynozzle
Stock No.36211EX. VAT INC VAT
List Price €59.30 List Price €71.76
*TSP €34.95 *TSP €42.29
PWC88L PLASTIC WATERING CAN
Stock No.43889EX. VAT INC VAT
List Price €14.83 List Price €17.95
*TSP €9.90 *TSP €11.98
SOFT GRIP HEAVY DUTY TRADE MEASURING TAPES• Expert Quality• Impact-resistant ABS case with belt clip• Soft grip with blade locking button• Metric (to Class II) and imperial graduations
Stock List Price List Price *TSP *TSPNo. Length Width ex. VAT Inc. VAT ex. VAT Inc. VAT
35946 5M/16ft 19mm €8.57 €10.37 €5.95 €7.2036001 8M/26ft 25mm €15.14 €18.32 €10.20 €12.3436002 10M/33ft 32mm €19.73 €23.87 €13.15 €15.91
STAINLESS STEEL RULES• Expert Quality• To JIS (Japanese Industrial Standard)• Graduations of 0.5mm, mm, 0.5cm, cm and 1/64”, 1/50”, 1/32”,
1/20”, 1/16”, 1/10”, 1/2”, and inches on the reverse
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
12613 150mm/6" €5.45 €6.59 €3.55 €4.3012614 300mm/12" €13.61 €16.47 €7.15 €8.6512615 600mm/24" €27.19 €32.90 €14.35 €17.3612616 1000mm/36" €52.54 €63.57 €27.00 €32.67
HG20041800W 230V HOT AIR GUN• Two settings (0°C and 550°C), ideal for paint stripping,
thawing pipes etc. • Complete with two nozzles, glass protection and
reflector hook.• Supplied with 3M
(approx.) cableand approved plug
Stock No.14429EX. VAT INC VAT
List Price €30.29 List Price €36.65
*TSP €22.73 *TSP €27.50
PB/DSET55 PIECE PAINT BRUSH SET• Contents: brush widths 12, 25, 38, 50 and 75mm• Pure bristle • Stainless steel ferrule• Hardwood handles
Stock No.71293EX. VAT INC VAT
List Price €17.02 List Price €20.59
*TSP €9.50 *TSP €11.50
Established in 1919, the family owned company has been trading inthe UK and Republic of Ireland for over 90 years.
The Company’s philosophy is simple - high quality products atcompetitive prices. All products are thoroughly tested prior to leavingthe manufacturer and on their arrival at Draper Tools’ headquartersthey are checked by the in-house Quality Assurance Department.
Much more information about the Draper Tool Company, its history,products and much, much more can be found on the website...www.draper.co.uk
Guaranteed Quality Tools Since 1919...
W2tools-4 EUR 9/9/11 13:01 Page 77
78
SG100100W 230V SOLDERING GUN KIT• Kit comprising soldering gun with 1.2M (approx.) cable
and approved plug, two spare tips, tube of solder andflux
Stock No.71420EX. VAT INC VAT
List Price €33.43 List Price €40.45
*TSP €17.40 *TSP €21.05
Stock No.68157EX. VAT INC VAT
List Price €9.48 List Price €11.47
*TSP €5.95 *TSP €7.20
electrical/soldering tools
GT8BUTANE SOLDERING IRON• Instant electronic ignition, variable flame control and
a refillable tank • Compact single hand operation •One fill of standard butane lighter fuel will give up to20 minutes (approx.) continuous work (at midsetting) • Length: 147mm
GT7HIGH TEMPERATURE GAS TORCH• Instant electronic ignition, windproof flame control
and a refillable tank • One fill of standard butanelighter fuel will give up to 20 minutes (approx.)continuous work • Length: 90mm
619MCPACK OF 8 MIXED COLOURS 10M x19mm INSULATION TAPE• Expert Quality • Ideal for replenishment stock for the
Draper Insulation Tape Countertop Display StockNo.12818 • Manufactured to BS3924 and BS4J10Specifications • PVC self-extinguishing flame resistanttape manufactured under strict quality control •Security wrapped eight rolls per pack
heavy dutysteel workbench
Soldering tasks in cars, commercial vehicles and other machinery can be performed quickly and accurately with thetools shown below. Again, they are tested and fully guaranteed for your peace of mind.
CSI-16W CORDLESS SOLDERING IRON• Slimline soldering iron with soft grip and LED to
indicate iron is on • Double action safety switch helpsprevent accidental switch on • Supplied complete withsoldering tip • Average working life per set of alkalinebatteries is 90mins (approx.) • Uses 4 x AAbatteries (sold separately)
EXCLUSIVE TO DRAPERTOOLS IN THE UK ANDREPUBLIC OF IRELANDStock No.13778
EX. VAT INC VATList Price €34.22 List Price €41.41
*TSP €21.48 *TSP €25.99
SI2525W 230V SOLDERING IRON• Complete with tip, 1.2M (approx.) cable
and approved plug
Stock No.71416EX. VAT INC VAT
List Price €17.71 List Price €21.43
*TSP €11.40 *TSP €13.79
Stock No.78774EX. VAT INC VAT
List Price €30.36 List Price €36.74
*TSP €15.95 *TSP €19.30
Stock No.78773EX. VAT INC VAT
List Price €16.68 List Price €20.18
*TSP €10.25 *TSP €12.40
HEAVY DUTY STEEL WORKBENCH• Expert Quality• Heavy duty sheet steel with powder coated finish• Ideal for the auto workshop• Draper Three Drawer Intermediate Tool Chest (Stock No. 03087) can be bolted
underneath to provide storage space using brackets (Stock No. 40910)• Weight 65kg (approx. excluding tool chest)• Overall size: 1530 x 705 x 865mm (L x W x H)
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
40909 Workbench €561.86 €679.86 €295.00 €356.9540910 Brackets (2) €35.59 €43.07 €21.60 €26.14
W2tools-4 EUR 9/9/11 13:01 Page 78
*Typical Selling Price - may vary in-store. 79
TC11/HD-PRO11 DRAWERTOOL CHEST• Expert Quality Plus• Heavy duty lifting
handles with grips• 5 full width drawers:
568 x 405 x 35mm• 1 full width drawer:
568 x 405 x 60mm• 4 half width drawers:
299 x 405 x 35mm• 1 half width drawers:
299 x 405 x 115mm• Overall size:
1029 x 452 x 503mm
Stock No.78213EX. VAT INC VAT
List Price €912.19 List Price €1103.75
*TSP €748.97 *TSP €906.25
RC14/HD-PRO14 DRAWER ROLLER TOOL CABINET• Expert Quality Plus• 6 two third width drawers:
568 x 405 x 60mm• 1 two third width drawer:
568 x 405 x 90mm• 1 two third width drawer:
568 x 405 x 145mm• 4 third width drawers:
299 x 405 x 60mm• 1 third width drawer:
299 x 405 x 90mm• 1 third width drawer:
299 x 405 x 310mm• Overall size:
1041 x 457 x 1048mm
Stock No.78214EX. VAT INC VAT
List Price €1160.40 List Price €1404.08
*TSP €954.01 *TSP €1154.35
TC6/HD-PRO6 DRAWERTOOL CHEST• Expert Quality Plus• Heavy duty lifting
handles with grips• 1 full width drawer:
565 x 418 x 60mm• 5 full width drawers:
565 x 418 x 51mm• Overall size:
663 x 451 x 502mm
Stock No.89291EX. VAT INC VAT
List Price €621.70 List Price €752.25
*TSP €538.80 *TSP €651.95
RC8/HD-PRO8 DRAWERROLLER TOOLCABINET• Expert Quality Plus• 2 full width drawers:
568 x 418 x 51mm• 2 full width drawers:
568 x 418 x 78mm• 3 full width drawers:
568 x 418 x 102mm• 1 full width drawer:
568 x 418 x 161mm• Overall size:
674 x 459 x 904mm
Stock No.89292EX. VAT INC VAT
List Price €662.35 List Price €801.45
*TSP €598.80 *TSP €724.55
Positive latching catchesthat keep drawers firmlyclosed yet easily opened
with the catch releasehandles.
Every drawer hassilky smooth ballbearing runners
Robust maintenancefree folding struts are
used for simplicityand long life.
Roller cabinet has acomfortable tubular
pull handle.
The tool chest featuresstrong lifting handleswith generous plastic
grips.
MDF board is used toprotect the roller
cabinet work surface.
Heavy gauge sheet steelis used throughout with
a tough oven bakedpowder coated finish.
Two swivellingcastors with locking
facility.
Large diameter andextra wide wheels.
Complete with highsecurity cylinder
barrel locks and twokeys.
Draper Expert plusTool Chests and Cabinet
Tool chests and rollercabinets designed andmanufactured to the veryhighest possible standards.
Each unit on this page boasts:• Sheet steel construction• Precise ball bearing
runners• Integral locking system• Positive drawer catches
Draper Expert Plus - forwhen only the very bestwill do.
W2tools-4 EUR 9/9/11 13:02 Page 79
80
Stock No.03084EX. VAT INC VAT
List Price €433.30 List Price €524.29
*TSP €390.00 *TSP €471.90
All drawers arefitted withrobust positiveseating to stopthem comingopen whenmoving the boxunlocked.
every Draper Expert toolbox has ball bearing
runners on each drawer
...whilst roller cabinets havecomfortable pull handles.
All come with cylinderbarrel locks and two keys.
Fitted with heavy duty, swivellingand braked castors.
All models come with gasstruts for convenience.....
Tool chests are fitted withtough chrome plated
soft-grip lifting handles.
packed withquality
features...
Draper Expert tool chests & cabinetsA range of professional quality, high specification tool chestsand cabinets. All have:• Sheet steel construction• Precise ball bearing runners• Integral locking systeM with two keys
The chests have reinforced hinged lids with gas strutsand chrome plated soft grip lifting handles and thecabinets have soft grip pull-along handles.
TC8C8 DRAWER TOOL CHEST• Expert Quality• 1 full width drawer: 569 x 360 x 67mm• 4 full width drawers: 569 x 360 x 40mm• 3 third width drawers: 163 x 360 x 40mm• Overall size: 660 x 406 x 492mm
Stock No.03081EX. VAT INC VAT
List Price €219.29 List Price €265.34
*TSP €191.94 *TSP €232.25
T4C4 DRAWER TOOL CHEST• Expert Quality• 1 full width drawer: 569 x 260 x 67mm• 3 full width drawers: 569 x 260 x 40mm• Overall size: 660 x 305 x 394mm
Stock No.03083EX. VAT INC VAT
List Price €235.75 List Price €285.26
*TSP €209.91 *TSP €253.99
TC6C6 DRAWER TOOL CHEST• Expert Quality• 1 full width drawer: 569 x 260 x 67mm• 2 full width drawers: 569 x 260 x 40mm• 3 third width drawers: 163 x 260 x 40mm• Overall size: 660 x 305 x 394mm
Draper Expert tool boxesare made from thick sheet
steel.
Work surfaces and drawersare lined with EVA foam
mats.
W2tools-4 EUR 9/9/11 13:02 Page 80
*Typical Selling Price - may vary in-store. 81
TC9C
9 DRAWER TOOL CHEST• Expert Quality• 3 full width drawers: 569 x 260 x 40mm• 6 third width drawers: 163 x 260 x 40mm• Overall size: 660 x 305 x 421mm
Stock No.03085EX. VAT INC VAT
List Price €342.43 List Price €414.34
*TSP €311.98 *TSP €377.50
Stock No.03086EX. VAT INC VAT
List Price €460.97 List Price €557.77
*TSP €438.00 *TSP €529.98
Stock No.03087EX. VAT INC VAT
List Price €249.34 List Price €301.70
*TSP €232.80 *TSP €281.69
Stock No.03088EX. VAT INC VAT
List Price €500.47 List Price €605.57
*TSP €408.06 *TSP €493.75
Stock No.03089EX. VAT INC VAT
List Price €605.83 List Price €733.06
*TSP €504.01 *TSP €609.85
Stock No.03091EX. VAT INC VAT
List Price €651.91 List Price €788.81
*TSP €522.02 *TSP €631.65
PALLETIZEDDELIVERIESThe products markedwith this logo can onlybe delivered on a
pallet. Prior to purchase please ensureyou have adequate facilities to unloadpalletized deliveries. Contact yourDraper stockist for local information.
IC3C
3 DRAWER INTERMEDIATETOOL CHEST• Expert Quality• 2 full width drawers: 569 x 403 x 40mm• 1 full width drawer: 569 x 403 x 94mm• Overall size: 672 x 448 x 316mm
RC5C
5 DRAWER ROLLER TOOL CABINET• Expert Quality• 2 fixed and 2 swivelling castors with brakes• 3 full width drawers: 569 x 404 x 67mm• 2 full width drawer: 569 x 404 x 121mm• Overall size: 672 x 457 x 794mm (height includes castors)
RC8C
8 DRAWER ROLLER TOOL CABINET• Expert Quality• 2 fixed and 2 swivelling castors with brakes• 3 full width drawers: 569 x 404 x 40mm• 2 full width drawers: 569 x 404 x 67mm• 1 full width drawer: 569 x 404 x 94mm• 1 full width drawer: 569 x 404 x 121mm• 1 full width drawer: 569 x 404 x 148mm• Overall size: 672 x 457 x 1006mm (height includes castors)
RC10C
10 DRAWER ROLLER TOOL CABINET• Expert Quality• 2 fixed and 2 swivelling castors with brakes• 4 half width drawers: 257 x 404 x 40mm• 1 full width drawer: 569 x 404 x 40mm• 2 full width drawers: 569 x 404 x 67mm• 1 full width drawer: 569 x 404 x 94mm• 1 full width drawer: 575 x 404 x 121mm• 1 full width drawer: 569 x 404 x 148mm• Overall size: 672 x 457 x 1005mm
(height includes castors)
TC10C
10 DRAWER TOOL CHEST• Expert Quality• 1 full width drawer: 569 x 360 x 67mm• 2 full width drawers: 569 x 360 x 40mm• 1 third drawer: 163 x 360 x 148mm• 6 third width drawers: 163 x 360 x 40mm• Overall size: 660 x 406 x 492mm
Stock No.03092EX. VAT INC VAT
List Price €65.83 List Price €79.66
*TSP €35.95 *TSP €43.50
ATB
HEAVY DUTY TOOL CABINET SHELF• Expert Quality• Shelf for mounting on Draper Tool Chests and other
manufacturers similar tool chests• Bolts to side of tool cabinet by means of a mounting
bracket and bolts supplied• Holds up to 30kg in weight• Overall size: 380 x 380mm
W2tools-5 EUR 9/9/11 13:07 Page 81
storage...boxes, chests, trolleys, organisersand much more!
82
Stock Internal List Price List Price *TSP *TSPNo. Dimensions ex. VAT Inc. VAT ex. VAT Inc. VAT
05543 900 x 425 x 330mm €270.00 €326.70 €258.00 €312.1805544 1210 x 610 x 470mm €390.00 €471.90 €369.95 €447.64
Stock No.78229EX. VAT INC VAT
List Price €217.75 List Price €263.48
*TSP €170.04 *TSP €205.75
Stock No.88904EX. VAT INC VAT
List Price €89.38 List Price €108.14
*TSP €47.93 *TSP €57.99Stock No.87986
EX. VAT INC VATList Price €93.31 List Price €112.91
*TSP €46.20 *TSP €55.90
Stock No.87987EX. VAT INC VAT
List Price €52.37 List Price €63.37
*TSP €26.44 *TSP €31.99
Stock No.04611EX. VAT INC VAT
List Price €215.98 List Price €261.33
*TSP €191.95 *TSP €232.26
Stock No.04612EX. VAT INC VAT
List Price €64.80 List Price €78.41
*TSP €57.60 *TSP €69.70
DRAPER BLACK BOX®(CONTRACTORS STORAGE BOXES)
• Heavy duty contractors storage boxes manufactured fromsheet steel with powder coated finish.
• Ideal for use on site, in vans, workshops or garages• Feet with bolt holes for fixing to a solid base to avoid
complete removal• Gas struts and integrated single pin hinge• Heavy duty lifting handles and the raised feet allow for
easier movement by fork lift trucks• Two cut outs on front for padlock attachment
RCTC8
COMBINED ROLLER CABINET CHEST• Sheet steel construction• Integral locking
system (top chest)• Overall size:
616 x 330 x1080mm
TB530
EXTRA LONG 4 TRAY CANTILEVERTOOL BOX• Expert Quality• Extra long tool box manufactured from heavy gauge
sheet steel, tubular handles and powder coated finish• Trays open automatically when handle is depressed and
close when lifted. The lid form incorporates provisionfor a padlock
• Overall size:530 x 200 x210mm
TB584
3DRAWERTOOLCHEST
• Expert Quality• Tough durable plastic• Friction type sliding drawers• Two clip type locks on lid• Integral lock prevents drawers sliding out
when in transit• Overall size: 585 x 247 x 340mm
TB584B
TOOL BOX• Expert Quality• Tough durable plastic• Tote tray 535 x 200 x 45mm• Two clip type locks on lid and sturdy carrying handle• Overall size: 584 x 267 x 254mm
WST-1
3 TIER PROFESSIONALWORKSHOP TROLLEY
• Expert Quality• High strength shelves with aluminium uprights lockable
steel drawer on roller bearings, two fixed and twolockable swivelling castor wheels
• Soft grip handles• Drawer dimensions:
500 x 400 x 60mm(L x W x H).
• Supplied flat-packedwith instructionbooklet
• Overall dimensions:670 x 470 x 970mm
WST-2
3 TIER WORKSHOP TROLLEY
• Plastic construction with aluminium uprightscomprising three shelves each with two removabledividers, six screwdriver holding slots, four additionalcompartments, two cup holders and a cable tidy.
• Two fixed and twoswivelling castorwheels
• Supplied flat packedwith instruction booklet
Configuration - each tier:2 compartments:120 x 260 x 40mmand one compartment:220 x 260 x 40mm
• Overall dimensions:570 x 450 x 890mm
W2tools-5 EUR 9/9/11 13:08 Page 82
*Typical Selling Price - may vary in-store. 83
Stock No.25924EX. VAT INC VAT
List Price €17.38 List Price €21.02
*TSP €10.99 *TSP €13.30
Stock No.12014EX. VAT INC VAT
List Price €17.21 List Price €20.82
*TSP €9.50 *TSP €11.50
Stock No.12015EX. VAT INC VAT
List Price €30.65 List Price €37.08
*TSP €17.85 *TSP €21.60
Stock List Price List Price *TSP *TSPNo. Dimensions ex. VAT Inc. VAT ex. VAT Inc. VAT
21659 920 x 305 x 1830mm €122.98 €148.80 €64.50 €78.0521663 1220 x 450mm x 1830mm €164.09 €198.55 €89.00 €107.69
Stock No.56444EX. VAT INC VAT
List Price €207.79 List Price €251.43
*TSP €90.04 *TSP €108.95
Stock No.49167EX. VAT INC VAT
List Price €497.71 List Price €602.23
*TSP €358.80 *TSP €434.15
3-in-1
QC22D
22 COMPARTMENT ORGANISER• Configuration: 8 compartments: 45 x 45 x 48mm; 10
compartments: 45 x 95 x 48mm; 4 compartments: 95 x95 x 48mm
• Plastic organiser with an adjustable matrix of lift-outstorage compartments
• Case has a carrying handle with ‘snap fit’ closures andclear lid
• Overall size:415 x 275 x 60mm
POC12
12 drawer ORGANISER• Configuration: 8 drawers size: 53 x 134 x
38mm; 4 drawers size: 110 x 134 x 53mm• Impact-resistant plastic ideal for use in the
workshop or home.• Latching facility to prevent drawer fall out• Slotted holes in cabinet to facilitate wall
mounting• Overall size: 260 x 160 x 230mm
POC30
30 drawer ORGANISER• Configuration: 24 drawers size: 53 x 134 x 38mm; 6 drawers size:
110 x 134 x 53mm• Impact-resistant plastic ideal for use in the workshop or home.
HEAVY DUTY STEELSHELVING UNITS• Expert Quality• Five shelf unit of robust
construction manufacturedfrom high quality steel
• Boltless for easy assembly.• Ideal for industrial use• Each shelf can carry up to
300kg (evenly distributed)giving a total of 1500kg
DST3
3 in 1 HEAVY DUTY SACK TRUCK• Tubular steel frame• Pneumatic tyres• Converts to three positions• Maximum capacity: 2 wheels + 2 castors 300kg; 2 wheels 250kg
PT2000
2 tonne PALLET TRUCK• Ideal for use in warehouse environments• Fork length: 1150mm• Lifting height: 85mm (min.)• Lifting height: 190mm (max.)• Fork width: 160mm• Overall fork width: 550m
• Latching facility to prevent drawer fall out• Slotted holes in cabinet to facilitate wall mounting• Overall size: 500 x 160 x 255mm
300kg
EACH SHELF CANHOLD UP TO 300kg
W2tools-5 EUR 9/9/11 13:08 Page 83
quality tool kitsImportant note: Draper Tools reserves the right to substitute items in the kits below with items ofequivalent finish or quality if the original item has been discontinued or is out of stock.
84
Stock No.87950EX. VAT INC VAT
List Price €549.00 List Price €664.29
*TSP €234.92 *TSP €284.25
Stock No.43748EX. VAT INC VAT
List Price €1107.22 List Price €1339.73
*TSP €483.47 *TSP €585.00
Stock No.43746EX. VAT INC VAT
List Price €1633.68 List Price €1976.75
*TSP €730.00 *TSP €883.30
Stock No.87951EX. VAT INC VAT
List Price €1953.77 List Price €2364.06
*TSP €958.80 *TSP €1160.15
*TKC
TOOL CHEST KIT• Handy tool kit with tool chest, for
use in the engineering workshopor garage
• Drawers are fitted with anti slipmats and ball bearing runners forsmooth operation and long life
• Secure integral locking systemssupplied with two keys
• Tool chest overall size:600 x 260 x 340mm
*GTK
GENERALTOOL KIT• Comprises
combined rollercabinet chest,power tools and aselection of popularhand tools
*PTK
PROFESSIONALTOOL KIT• Comprises combined
roller cabinet chest(size 616 x 330 x1080mm) with threepower tools and aselection of handtools suitable for usein the garageworkshop
*TKD
DELUXE TOOL KIT• Expert Quality• Specialist tool kit for
professionals and tradesmencomprising many ExpertQuality products
• Four drawer tool chest andcabinet manufactured fromsheet steel with powdercoated finish
• Drawers arefitted with anti-slipmats and ball bearingrunners for smoothoperation and long life.Secure integral lockingsystem supplied withtwo keys
• Tool storage unitsoverall size:670 x 460 x 1130mm
W2tools-5 EUR 9/9/11 13:08 Page 84
precision/engineering
toolsThe selection we have made here is
suitable for many applications withinthe workshop whether automotive,
manufacturing or production,you’ll find at least one tool to
suit your purpose!
*Typical Selling Price - may vary in-store. 85
PDVC150M
DUAL READING DIGITALVERNIER CALIPER• Expert Quality• Metal-bodied manufactured
from brushed stainless steel• Extra large display reading
0.01mm and 0.005”• Range 0-150mm/6”.• Supplied with SR44 battery
Stock No.46610EX. VAT INC VAT
List Price €43.39 List Price €52.50
*TSP €24.79 *TSP €30.00
BG50/160
50-160mm BORE GAUGE SET• Expert Quality• Contents: 3mm travel dial test indicator; 55mm
extension bar; 4 spacer rings size: 0.5, 1.0, 2.0 and3.0mm; 12 measuring rods size: 50, 55, 60, 65, 70,75, 80, 85, 90, 95, 100 and 105mm
• Accurately measures bores, detects tapers or ovality• 0.01mm accuracy
Stock No.02753EX. VAT INC VAT
List Price €125.11 List Price €151.39
*TSP €69.01 *TSP €83.50
METRIC EXTERNALMICROMETERS• Expert Quality• Enamelled frame, heat
plates, satin chrome thimbleand sleeve.
• Graduations 0.01mm.Carbide tipped anvils, lockand ratchet stop
• Supplied with calibrationrod and C spanner
PDGS
METRIC DIAL TEST INDICATOR KIT• Expert Quality• Ideal all-round kit for engineers and apprentices• Contents: Metric dial test indicator with plunger
(0-25mm); metric dial test indicator with stylus(0-1.25mm); magnetic stand with fine adjustment; 22interchangeable tips for dial test indicator with plunger;6mm and 8mm stylus’ for dial test indicator clamp
Stock No.46609EX. VAT INC VAT
List Price €121.68 List Price €147.23
*TSP €59.92 *TSP €72.50
Stock No.45277EX. VAT INC VAT
List Price €43.10 List Price €52.16
*TSP €23.95 *TSP €28.98
Stock No.45458EX. VAT INC VAT
List Price €6.91 List Price €8.36
*TSP €4.75 *TSP €5.75
7324
200mm ENGINEERS SCRIBER• Straight and 90° hardened points
Stock No.34099EX. VAT INC VAT
List Price €6.65 List Price €8.04
*TSP €4.20 *TSP €5.08
Stock List Price List Price *TSP *TSPNo. Range ex. VAT Inc. VAT ex. VAT Inc. VAT
46603 0-25mm €27.24 €32.96 €15.50 €18.7646604 25-50mm €29.26 €35.40 €16.20 €19.6046605 50-75mm €32.42 €39.23 €17.40 €21.0546606 75-100mm €35.62 €43.10 €19.15 €23.17
MB-LDFAB
MAGNETIC STANDWITH FINEADJUSTMENT• For use with dial
indicators• Powerful magnetic base
with on/off switch• Fine adjustment screw
401
20 BLADE METRIC SCREWPITCHGAUGE SET• Range 0.4-7.0mm
W2tools-5 EUR 9/9/11 13:08 Page 85
86
37M
37 PIECE METRIC TAP AND DIE SET• High carbon steel• Supplied with the correct drill bits for tapping• Contents: 8 metric dies, 8 metric taper taps, 8 metric
plug taps, 2 tap wrenches, die holder, 8 HSS twist drillsand screwpitch gauge
Stock No.79203EX. VAT INC VAT
List Price €85.75 List Price €103.76
*TSP €51.60 *TSP €62.44
75MM
75 PIECE COMBINATION TAP ANDDIE SET - METRIC AND BSP• High carbon steel• Contents: 9 metric coarse dies, 8 metric fine dies, BSP
die, 17 metric taper taps, 17 metric plug taps(bottoming), taper tap, 2 tap wrenches, die holder, drillbits for tapping, screwpitch gauge and screwdriver
Stock No.79205EX. VAT INC VAT
List Price €190.39 List Price €230.37
*TSP €90.00 *TSP €108.90
TDS-28
28 PIECE METRIC TAP ANDHSS DRILL SET• All-round set comprising seven sizes of
tap (taper, secondary and bottoming)and seven HSS drills
• Contents: taper, secondary andbottoming taps size: M3 x 0.3, M4 x 0.7,M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x1.5 and M12 x 1.75
Stock No.40891EX. VAT INC VAT
List Price €55.27 List Price €66.88
*TSP €27.50 *TSP €33.28
1B
SCHRÖDER 5 PIECESCREW EXTRACTOR SET• Expert Quality• Contents: one of each size;
1 (3-6mm), 2 (6-8mm),3 (8-11mm), 4 (11-14mm)and 5mm(14-18mm)
• Chromevanadiumsteel
Stock No.45856EX. VAT INC VAT
List Price €13.30 List Price €16.09
*TSP €8.70 *TSP €10.53
SEDS-10
10 PIECE METRIC SCREWEXTRACTOR AND HSSDRILL SET• Spiral pattern extractors with square
drive ends manufactured from qualitysteel
• Contents: Screw Extractors: 1 (3-6mm),2 (6-8mm), 3 (8-11mm), 4 (11-14mm)and 5 (14-18mm); HSS Drills: 2.0, 3.0,4.0, 6.6 and 7.5mm
Stock No.40892EX. VAT INC VAT
List Price €37.18 List Price €44.98
*TSP €23.95 *TSP €28.98
METRIC HSS COBALT TWIST DRILLS FOR METRIC HELI-COIL®THREAD REPAIR KITS• Expert Quality• High speed steel straight
shank drills (with 5% cobalt)for specifically drilling outdamaged threads prior toinsertion of a Helicoilinsert
• The addition of cobalt toHSS adds strength andwear resistance forlonger life
• For use with MetricHeli-coil® ThreadRepair Kits
Stock List Price List Price *TSP *TSPNo. Diameter For ex. VAT Inc. VAT ex. VAT Inc. VAT
76093 4.1mm M4 x 0.7 €2.90 €3.51 €2.65 €3.2176094 5.2mm M5 x 0.8 €3.34 €4.04 €3.00 €3.6376095 6.2mm M6 x 1.0 €3.96 €4.79 €3.55 €4.3076096 7.2mm M7 x 1.0 €5.28 €6.39 €4.75 €5.7576097 8.3mm M8 x 1.25 €7.06 €8.54 €6.35 €7.6876098 9.3mm M9 x 1.25 €8.38 €10.13 €7.50 €9.0876099 10.3mm M10 x 1.5 €10.51 €12.72 €9.50 €11.5076100 11.3mm M11 x 1.5 €12.12 €14.67 €10.95 €13.2576101 12.4mm M12 x 1.75 €14.71 €17.80 €13.25 €16.03
DAVE SAYSOur cobalt drills are idealfor drilling hard materialssuch as stainless steel.The addition of 5% cobaltto an HSS drill increasesits wear resistance andstrength to the drill bititself. This will save timeand money.
DAVESAYS
QUALITY MAKES THEDIFFERENCE
BV150/L
150mm ENGINEERS BENCH VICE• Quality cast iron body with steel screw and
handle• Hardened carbon steel interchangeable jaws
Stock No.45232EX. VAT INC VAT
List Price €135.82 List Price €164.34
*TSP €74.50 *TSP €90.15
W2tools-5 EUR 9/9/11 13:08 Page 86
*Typical Selling Price - may vary in-store. 87
Stock No.77170EX. VAT INC VAT
List Price €28.58 List Price €34.59
*TSP €14.01 *TSP €16.95
300mm BI-METALHACKSAWBLADES• Expert Quality• HSS welded to carbon
steel• Pack of ten blades
Stock List Price List Price *TSP *TSPNo. TPI ex. VAT Inc. VAT ex. VAT Inc. VAT
19347 18 €21.98 €26.60 €13.20 €15.9719348 24 €21.98 €26.60 €13.20 €15.9738266 32 €21.98 €26.60 €13.20 €15.97
Stock No.31234EX. VAT INC VAT
List Price €8.57 List Price €10.37
*TSP €5.70 *TSP €6.90
312JH
150mm JUNIOR HACKSAW BLADES• General purpose with pinned ends• Pack of 10 blades
Stock No.11237EX. VAT INC VAT
List Price €2.42 List Price €2.93
*TSP €1.55 *TSP €1.88
COMPSG/6
6 PIECE SOFT GRIP CHISELAND PUNCH SET• Expert Quality• Contents: 2 cold chisels: 12 x 165 and 16 x 175mm;
2 long taper punches: 3 x 175 and 4 x 185mm; centrepunch: 4 x 175mm; parallel pin punch: 4 x 185mm
• Chrome vanadium steel hardened and tempered witha chemically blacked finish
• Soft grip handlefor user comfort
Stock No.44946EX. VAT INC VAT
List Price €38.47 List Price €46.55
*TSP €23.95 *TSP €28.98
CP12
12 PIECE CHISEL AND PUNCH SET• Contents: 4 cold chisels, taper punch, 2 parallel pin
punches, 2 parallel taper pin punches, centre punch,point chisel and cross chisel
Stock No.13039EX. VAT INC VAT
List Price €39.58 List Price €47.89
*TSP €20.00 *TSP €24.20
GT807
125mm AUTOMATIC CENTRE PUNCH• Expert Quality• Heavy duty spring-loaded hardened steel point• Adjustable striking force
Stock No.13612EX. VAT INC VAT
List Price €12.89 List Price €15.59
*TSP €8.35 *TSP €10.10
Stock No.36325EX. VAT INC VAT
List Price €12.38 List Price €14.98
*TSP €6.49 *TSP €7.85
Stock No.44962EX. VAT INC VAT
List Price €26.71 List Price €32.32
*TSP €13.97 *TSP €16.90
Supplied complete witha 300mm HSS blade
4917
300mm HEAVY DUTY SOFT GRIPHACKSAW FRAME• Expert Quality• Traditional pattern with an adjustable frame for
300mm blades• Soft grip handle• Frame has two sets of blade spigots which
allows straight or 45° cutting.• Supplied with a 300mm HSS blade
1310
SOFT GRIP MINI SAW WITH POWDERCOATED FRAME• Uses junior hacksaw blades (150mm)• Powder coated metal frame with shaped soft grip
handle for user comfort and control and blade tensioner• For cutting metal, wood, plastics etc.
4884/12C
12 PIECE 140mm NEEDLE FILE SET• Contents: flat hand; flat taper; joint; taper round; half
round; square; three square; oval; crossing; crochet;barrette and knife
• Moulded plastic handles
8106B/4
4 PIECE 200mm SOFT GRIPENGINEERS FILE SET• Contents: flat, half round, round and
three square• High carbon steel with soft grip handles
with and hang hole
W2tools-5 EUR 9/9/11 13:08 Page 87
protective clothingand safety gear
Draper Tools and United Autosports...Draper Tools is delighted to be “Prime Sponsor -Tooling” for the United Autosports race team anda major sponsor of Joe Osborne - one of theirdrivers who is a British Racing Drivers Club(BRDC) “rising star”
88
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
63973 L €30.96 €37.46 €21.48 €25.9963974 XL €30.96 €37.46 €21.48 €25.99
BOILER SUITS• Polyester cotton• Stud fastening front
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
37813 M €27.96 €33.83 €17.40 €21.0537814 L €27.96 €33.83 €17.40 €21.0563980 XL €27.96 €33.83 €17.40 €21.05
Stock No.63976EX. VAT INC VAT
List Price €5.98 List Price €7.23
*TSP €4.26 *TSP €5.15
Stock No.64022EX. VAT INC VAT
List Price €17.98 List Price €21.75
*TSP €13.97 *TSP €16.90
HIGH VISIBILITYJACKETS• Expert Quality• To Health & Safety Regulations
EN471 Class 3 and EN343 Class 3• Quilted lining with integral breast
pocket• High quality reflective tape• Heavy duty zip
HVWC
HIGH VISIBILITYEXTRA LARGEWAISTCOAT• Expert Quality• Conforms to EN471
Class 2• Lightweight tough
polyester material• High quality
reflective strips• Hook and loop
front fastening
HVRS
2 PIECE EXTRALARGE HIGHVISIBILITYRAIN SUIT• Expert Quality• Two-piece suit -
jacket and trousers• Concealed hood• Heavy duty zip
PVC/WS
LARGE RAIN SUIT• Two-piece suit - jacket and trousers• Welded seams with adjustable cuffs and ankles• Heavy duty zip with stud fastening storm flap
Stock No.20991EX. VAT INC VAT
List Price €8.57 List Price €10.37
*TSP €5.40 *TSP €6.53
W2tools-5 EUR 9/9/11 13:08 Page 88
Quality safety gear, including jackets and footwear which aredesigned specially for use by vehicle technicians.See pages 90 - 91 for hats, goggles, masks, ear plugs and gloves.
*Typical Selling Price - may vary in-store. 89
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
49398 4/37 €51.65 €62.49 €38.70 €46.8349399 5/38 €51.65 €62.49 €38.70 €46.8349400 6/39 €51.65 €62.49 €38.70 €46.8349303 7/41 €51.65 €62.49 €38.70 €46.8349304 8/42 €51.65 €62.49 €38.70 €46.8349305 9/43 €51.65 €62.49 €38.70 €46.8349306 10/44 €51.65 €62.49 €38.70 €46.8349311 11/46 €51.65 €62.49 €38.70 €46.8349401 12/47 €51.65 €62.49 €38.70 €46.8312180 Sp. Laces €1.68 €2.03 €1.50 €1.82
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
49407 4/37 €48.60 €58.81 €37.50 €45.3849408 5/38 €48.60 €58.81 €37.50 €45.3849409 6/39 €48.60 €58.81 €37.50 €45.3849312 7/41 €48.60 €58.81 €37.50 €45.3849313 8/42 €48.60 €58.81 €37.50 €45.3849314 9/43 €48.60 €58.81 €37.50 €45.3849315 10/44 €48.60 €58.81 €37.50 €45.3849316 11/46 €48.60 €58.81 €37.50 €45.3849410 12/47 €48.60 €58.81 €37.50 €45.3812191 Sp. Laces €1.68 €2.03 €1.50 €1.82
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
49317 7/41 €61.49 €74.40 €45.50 €55.0649318 8/42 €61.49 €74.40 €45.50 €55.0649319 9/43 €61.49 €74.40 €45.50 €55.0649320 10/44 €61.49 €74.40 €45.50 €55.0649321 11/46 €61.49 €74.40 €45.50 €55.0612277 Sp. Laces €1.68 €2.03 €1.50 €1.82
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
49327 7/41 €70.08 €84.80 €52.40 €63.4049328 8/42 €70.08 €84.80 €52.40 €63.4049330 9/43 €70.08 €84.80 €52.40 €63.4049331 10/44 €70.08 €84.80 €52.40 €63.4049470 11/46 €70.08 €84.80 €52.40 €63.4049412 12/47 €70.08 €84.80 €52.40 €63.4012192 Sp. Laces €1.68 €2.03 €1.50 €1.82
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
49464 7/41 €68.40 €82.76 €51.95 €62.8649465 8/42 €68.40 €82.76 €51.95 €62.8649466 9/43 €68.40 €82.76 €51.95 €62.8649467 10/44 €68.40 €82.76 €51.95 €62.8649468 11/46 €68.40 €82.76 €51.95 €62.8612198 Sp. Laces €1.68 €2.03 €1.50 €1.82
Stock List Price List Price *TSP *TSPNo. Sizes GB/EU ex. VAT Inc. VAT ex. VAT Inc. VAT
02697 7/41 €20.69 €25.03 €16.30 €19.7202698 8/42 €20.69 €25.03 €16.30 €19.7202699 9/43 €20.69 €25.03 €16.30 €19.7202700 10/44 €20.69 €25.03 €16.30 €19.7202701 11/46 €20.69 €25.03 €16.30 €19.7202702 12/47 €20.69 €25.03 €16.30 €19.72
SAFETY BOOT TRAINERS WITHMETAL TOECAPS TO S1PA• General work boot-style trainers
with metal toecap and mid-soleessential for site work
• Suede leather uppers• Anti-static with heel absorption• Manufactured to EN20345; 2004 S1PA
SAFETY SHOE TRAINERS WITHMETAL TOECAPS TO S1PA• General work shoe-style trainers
with metal toecap and mid-sole.• Suede leather uppers• Anti-static with heel absorption• Manufactured to EN20345;
2004 S1PA
SAFETY BOOT TRAINERSWITH COMPOSITE TOECAPSTO S1PA• General work wear boots with
lightweight composite toecap andmid-sole essential for site workand secure areas
• Suede leather uppers• Anti-static with heel
absorption• Manufactured to EN20345;
2004 S1PA
WATER-RESISTANT SAFETYBOOTS WITH METALTOECAPS TO S3• General work wear boots with metal toecap
and mid-sole essential forsite work
• Water-resistant• Leather uppers• Anti-static with heel
absorption• Manufactured to EN20345; 2004 S3
SAFETY SHOES WITH COMPOSITETOECAPS TO S1PA• General work wear shoes with lightweight composite toecap and mid-sole essential for
site work and secure areas• Lightweight, the non metal construction is
ideal for working in securityscreened areas.
• Leather uppers• Anti-static with heel
Absorption• Manufactured to
EN20345; 2004 S1PA
SAFETY WELLINGTON BOOTSWITH METAL TOECAPS TO S5• General work wear boots with metal toecap and
mid-sole essential for site work• Rubber 100% waterproof uppers with puncture
protection• Anti-static with heel shock absorption• Manufactured to EN20345; 2004 S5
W2tools-5 EUR 15/9/11 12:55 Page 89
safetyequipment
90
SSP10
SAFETY SPECTACLES WITH UVPROTECTION• Expert Quality• Lightweight, with one piece lens, soft temple inserts
and non slip nose bridge• For use when filing, sanding, planing, routing and
many other potentially hazardous jobs involving arisk of eye injury from a low velocity impact
• Conforms to EN166 1 F Specification
Stock No.12057EX. VAT INC VAT
List Price €6.48 List Price €7.84
*TSP €4.20 *TSP €5.08
PSG
PROFESSIONAL SAFETY GOGGLES• Expert Quality• Conforms to EN166.1 Safety Specification Category 2• Traditional pattern with indirect ventilation• Anti-mist polycarbonate lens• For protection against particles i.e cinders,
low grade debris etc. • Impact-resistant polycarbonate
Stock No.79363EX. VAT INC VAT
List Price €9.10 List Price €11.01
*TSP €5.99 *TSP €7.25
Stock No.43276EX. VAT INC VAT
List Price €14.62 List Price €17.69
*TSP €8.51 *TSP €10.30
Stock No.88628EX. VAT INC VAT
List Price €6.00 List Price €7.26
*TSP €4.20 *TSP €5.08
Stock No.69600EX. VAT INC VAT
List Price €7.94 List Price €9.61
*TSP €5.10 *TSP €6.17
Stock No.19154EX. VAT INC VAT
List Price €12.65 List Price €15.30
*TSP €6.94 *TSP €8.40
Stock No.12213EX. VAT INC VAT
List Price €15.14 List Price €18.32
*TSP €9.50 *TSP €11.50
SAFETY HELMETS• To EN 937• High density polyethylene shell
Stock List Price List Price *TSP *TSPNo. Colour ex. VAT Inc. VAT ex. VAT Inc. VAT
54868 Yellow €8.50 €10.28 €5.95 €7.2063307 White €8.50 €10.28 €5.95 €7.2063308 Blue €8.50 €10.28 €5.95 €7.20
FS8
FACESHIELD• Clear polycarbonate with adj browguard, sweatband and harness• Universal fit for better protection
Stock No.33831EX. VAT INC VAT
List Price €41.18 List Price €49.83
*TSP €23.95 *TSP €28.98
FM8/P2V
DISPOSABLE DUSTMASK FORWELDING• Conforms to EN149-FFP2• With carbon filter for
protection againstwelding fumes (fine metalparticulates), ozone (as aby-product of TIG/MIGwelding, nuisance organicvapours, fine toxic dust fibres and aqueous mist
EP50
50 PAIRS OF EAR PLUGS INPLASTIC JAR• Manufactured to EN352-2:2002 Specification• Soft PU foam which gives high performance protection• Tapered design which
reverts to originalshape after use
• Nominal diameter12mm
EM1
EAR DEFENDERS• Protection to CE96 Conforms to EN 352-1:2001
specification• Lightweight and robust ear defender providing
cost-effective protection• Durable
high-impactpolystyrene
FM10
TWIN PACK OF FFP2 MOULDEDDUST MASKS• Conforms to EN149-FFP2• Mask with valve offering
protection from solid andliquid aerosol variants
• Adjustable straps forcontoured fit
• Assigned protection level(APF) 10 x Workplace ExposureLimit (WEL) for fine non-toxicdusts, fibres, fumes and mists
FM11/50
50 DISPOSABLENUISANCEDUST MASKS• Masks without
valve offeringbasic protection
W2tools-5 EUR 15/9/11 12:55 Page 90
gloves...
*Typical Selling Price - may vary in-store. 91
Stock No.12237EX. VAT INC VAT
List Price €13.15 List Price €15.91
*TSP €7.50 *TSP €9.08
Stock No.10926EX. VAT INC VAT
List Price €6.60 List Price €7.99
*TSP €3.93 *TSP €4.76
WET WORK GLOVES• Expert Quality• Heavy fabric glove and PVC
coating
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
10927 Medium €2.62 €3.17 €1.80 €2.1812229 Large €2.62 €3.17 €1.80 €2.18
MECHANICS GLOVES• Expert Quality• Leather palm and reinforced thumb join• Latex coated panels to fingertip and
palm for extra grip• Oil and grease resistant• Elasticated cuffs
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
12248 Large €23.06 €27.91 €13.80 €16.7012250 Extra Large €23.06 €27.91 €13.80 €16.70
HIGH VISIBILITYMECHANICS GLOVES• Expert Quality,• Leather palm and reinforced thumb join• Oil and grease resistant• Latex coated panels to fingertip and palm
for extra grip• High visibility back with reflective strips
on knuckles and fingers• Elasticated cuffs
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
12245 Large €23.06 €27.91 €13.80 €16.7012246 Extra Large €23.06 €27.91 €13.80 €16.70
CLOSE FIT GLOVES• Expert Quality• Highly flexible close fit gloves with
polyurethane lined palms, nylon liningand elasticated wristbands
• Ideal for general industrial use
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
10945 M €4.34 €5.26 €2.90 €3.5110947 L €4.34 €5.26 €2.90 €3.5110948 XL €4.34 €5.26 €2.90 €3.5149426 L (bag of 10) €31.99 €38.71 €17.99 €21.77
Stock No.12257EX. VAT INC VAT
List Price €2.90 List Price €3.51
*TSP €1.90 *TSP €2.30
PVCG14
350mm PVC GAUNTLETS• PVC dipped with open cuff for protection against acid,
alkali and grease• Ideal for use when parts cleaning
and washing
HDLIG
HEAVY DUTY LEATHER INDUSTRIALGLOVES• Expert Quality• Heavy duty blue chrome split leather palm, thumb
and knuckle guard• Cotton backed with elasticated wrist band
and rubber cuff
KS14
355mm KEVLARPROTECTION SLEEVE• Expert Quality• Ideal for sheet metal and plate glass work• Designed to prevent cuts to forearm• Thumb slot ensures sleeve will remain in
position whilst wearing. Knitted cottonshell
• Manufactured to BS EN 388Specification 1.3.4.X.
W2tools-5 EUR 14/9/11 14:23 Page 91
92
fire extinguisher stands and
fire extinguishersThese fire extinguishers are approved toBS EN3-7:2004 + A1:2007 standards.These are ideal forgarages, workshops and industrial units.
FAK10C
10 PERSON FIRST AID KIT• Comprehensive kit• Suitable for areas with fewer than 10 people employed
and where low risk is expected• Supplied in durable plastic case with carrying handle
Stock No.89827EX. VAT INC VAT
List Price €32.64 List Price €39.49
*TSP €15.99 *TSP €19.35
EMERGENCYSTERILE EYEWASH STATION• Wall mountable with
mirror• 2 x 500ml bottles of
single use sterilesodium chloridesolution
• Ideal for office andwarehouse use
Stock List Price List Price *TSP *TSPNo. Description ex. VAT Inc. VAT ex. VAT Inc. VAT
43065 Station €44.62 €53.99 €22.75 €27.5343066 Refill €11.71 €14.17 €7.15 €8.65
RCD3
230V RCDADAPTOR• Tested to BS 1363
and IEC 61540• For standard 13A
socket• Rated trip current
30mA• Trip speed 30Ms
(typical)
Stock No.69307EX. VAT INC VAT
List Price €24.14 List Price €29.21
*TSP €14.35 *TSP €17.36 Stock No.22185EX. VAT INC VAT
List Price €38.98 List Price €47.16
*TSP €20.99 *TSP €25.40
Stock No.71408EX. VAT INC VAT
List Price €61.30 List Price €74.17
*TSP €31.40 *TSP €38.00
Stock No.12272EX. VAT INC VAT
List Price €37.78 List Price €45.71
*TSP €35.00 *TSP €42.35
Stock No.12275EX. VAT INC VAT
List Price €55.44 List Price €67.08
*TSP €54.00 *TSP €65.34
FIRE1B
1kg DRY POWDERFIREEXTINGUISHER• Effective on petrol, oil,
gas, paint, wood, solventsand electrical equipment
• For use on class A, B andC fires, rating 5A/34B
• Approved to BS EN3-7:2004+A1:2007
• Halon-free• Suitable for marine use• Wall mountable
FIRE2A
2kg DRY POWDERFIREEXTINGUISHER• Effective on petrol, oil,
gas, paint, wood, solventsand electrical equipment
• Use on Class A, B and Cfires rating 13A/89B
• Approved to BS EN3-7:2004+A1:2007
• Halon-free• Wall mountable• Pressure gauge• Five year warranty
FIREST1
SINGLE FIREEXTINGUISHERSTAND• Suitable for fire
extinguishers with amaximum diameter of240mm
• Freestanding, for use inpublic buildings, hotels,offices, schools, foodpreparation areas etc.
• Chemical resistant PEfor long life
FIREST2
DOUBLE FIREEXTINGUISHERSTAND• Suitable for fire
extinguishers with amaximum diameterof 240mm
• Freestanding, foruse in publicbuildings, hotels,offices, schools,food preparationareas etc.
• Chemical resistantPE for long life
W2tools-5 EUR 9/9/11 13:08 Page 92
*Typical Selling Price - may vary in-store. 93
oil/chemical containmentOil and other chemicals when spilt will cause environmental damage to flora and fauna.That’s why there are toughgovernment regulations for the storage of potentially hazardous materials in working areas.The products shown on this page will help users comply with those regulations.
helping with...health and safety guidelinesTwo oil/chemical containment pallets that can be moved around working areas and canbe easily stored when not in use.
Stock No.12260EX. VAT INC VAT
List Price €676.61 List Price €818.70
*TSP €552.00 *TSP €667.92
Stock No.43966EX. VAT INC VAT
List Price €76.25 List Price €92.26
*TSP €59.94 *TSP €72.53
Stock No.44057EX. VAT INC VAT
List Price €195.05 List Price €236.01
*TSP €170.40 *TSP €206.18
Stock No.44058EX. VAT INC VAT
List Price €241.92 List Price €292.72
*TSP €215.95 *TSP €261.30
Stock No.44059EX. VAT INC VAT
List Price €283.46 List Price €342.99
*TSP €246.00 *TSP €297.66
Stock List Price List Price *TSP *TSPNo. Capacity ex. VAT Inc. VAT ex. VAT Inc. VAT
12263 20L €54.43 €65.86 €45.60 €55.1812266 30L €57.46 €69.52 €47.95 €58.02
Stock No.44106EX. VAT INC VAT
List Price €140.88 List Price €170.46
*TSP €124.80 *TSP €151.01
Visit this site for furtherdetails on oil containment:
www.environment-agency.gov.uk
PDC250
DRUMKART
• HDPE drumcart designedfor 205L drums
• Horizontal spill containment of 250L• Vertical spill containment of 3L• Safety support locks into place for easy vertical loading
and storage• Barrel is secured with ratchet strap• Ideal mobile dispenser unit and sump• Foot holes on underside of trolley allow for easy pull
down and handling• Rubber wheels to aid movement around workshop
ODC
205L DRUM CRADLE• For lifting, tilting and manoeuvring 205L
(55 gallon) drums around work areas• 65mm diameter wheels with transport handle
DR-1
DRUM RACK FOR TWO DRUMS• Heavy duty polyethylene allows for two 205L drums to
be mounted on to a four drum spill containment pallet(Draper Stock No. 44059)
• Size 1375 x 940 x 390mm
SPILL-2
TWO DRUM SPILLCONTAINMENT PALLET• Heavy duty for the storage of chemical and oil-based
products• 100% polyethylene construction for excellent chemical
resistance, this pallet assists in the compliance withenvironmental protection obligations by providing staticspill containment
• Removable deck for cleaning and inspection• Overall size: 1300 x 750 x 400mm • Capacity 250L
SPILL-4
FOUR DRUM SPILLCONTAINMENT PALLET• Heavy duty for the storage of chemical and oil-based
products• 100% polyethylene construction for excellent chemical
resistance, this pallet assists in the compliance withenvironmental protection obligations by providing staticspill containment
• Removable deck for cleaning and inspection• Capacity 250L• Overall dimensions: 1380 x 1290 x 280mm
SPILL DRIP TRAYS• Heavy duty HDPE• Protects workplace when charging
and discharging oils, chemicalsand other liquids.
• Can be used with/without non-slipplatform
• Stackable for easy transportationand storage
SPILL KIT L
45L OIL AND FUEL SPILL KIT• Kit containing many items to deal with an oil or fuel
spillage• Carried in a high visibility shoulder bag with strap and
double pull zip• Contents: 2 x 3M long spill socks; 25 absorption pads
size 400 x 500mm (approx.); Plastic drain plug rugsize 650 x 450mm (approx.); waste disposal bag withzip tie size 1M x 6M - flat-approx.); PVC protectivegloves to CE standard 4121 and laminated instructionand checklist sheet
W2tools-5 EUR 9/9/11 13:08 Page 93
94
Stock No.63382EX. VAT INC VAT
List Price €7.56 List Price €9.15
*TSP €6.80 *TSP €8.23
Stock No.69010EX. VAT INC VAT
List Price €7.56 List Price €9.15
*TSP €6.80 *TSP €8.23
Stock No.65440EX. VAT INC VAT
List Price €43.39 List Price €52.50
*TSP €38.98 *TSP €47.17
Stock No.66041EX. VAT INC VAT
List Price €12.70 List Price €15.36
*TSP €11.45 *TSP €13.85
Stock No.69009EX. VAT INC VAT
List Price €12.70 List Price €15.36
*TSP €11.45 *TSP €13.85
assorted hardwareQuality hardware products for use around the workshop, factory or office.All fully guaranteed and to Draper Tools’ rigorous standards.Do not compromise - insist on Draper!
Guaranteed Quality ToolsSince 1919...Established in 1919, the familyowned company has beentrading in the UK and Republicof Ireland for over 90 years.
The Company’s philosophy issimple - high quality productsat competitive prices. Allproducts are thoroughly testedprior to leaving themanufacturer and on theirarrival at Draper Tools’headquarters they are checkedby the in-house QualityAssurance Department.
Much more information aboutthe Draper Tool Company, itshistory, products and much,much more can be found onthe website...www.draper.co.uk
Stock No.31565EX. VAT INC VAT
List Price €4.92 List Price €5.95
*TSP €4.45 *TSP €5.38
Stock No.31570EX. VAT INC VAT
List Price €2.66 List Price €3.22
*TSP €2.40 *TSP €2.90
Stock No.26928EX. VAT INC VAT
List Price €7.32 List Price €8.86
*TSP €4.50 *TSP €5.45
Stock No.56232EX. VAT INC VAT
List Price €20.52 List Price €24.83
*TSP €12.52 *TSP €15.15
Stock No.12512EX. VAT INC VAT
List Price €20.52 List Price €24.83
*TSP €12.52 *TSP €15.15
TP-HAZ
33M x 50mm BLACK AND YELLOWHAZARD TAPE ROLL• Self adhesive PVC tape
TP-HAZ
33M x 50mm RED AND WHITEHAZARD TAPE ROLL• Self adhesive PVC tape
TP-S/GRIP/HZ
18M x 50mm BLACK AND YELLOWSAFETY GRIP TAPE ROLL• Self adhesive tape helps to prevent slips and falls• For use on steps, ladders and other outdoor
slippery surfaces
TP-BAR
500M x 75mm RED AND WHITEBARRIER TAPE ROLL• For marking out no-go areas• Non-adhesive
TP-BAR
500M x 75mm BLACK AND YELLOWBARRIER TAPE ROLL• For marking out no-go areas• Non-adhesive
WB-HD/IS
310mm HEAVY DUTY 4 ROW WIRESCRATCH BRUSH WITH SCRAPER• Wood handle incorporates scraper and hang hole
WB/I
290mm WIRE SCRATCH BRUSH• Wood handle incorporates hang hole• 4 rows
4864
3 PIECE 230mm BRUSH SET• Contents: three brushes - brass, nylon
and stainless steel
CTP5
650 PIECEASSORTED NYLONCABLE TIE PACK• 650 (approx) mixed sizes
CTP5M
650 PIECEASSORTED NYLONCABLE TIE PACK• 650 (approx) mixed sizes
and colours
W2tools-5 EUR 9/9/11 13:08 Page 94
*Typical Selling Price - may vary in-store. 95
HEAVY DUTY SOLID STEEL PADLOCKSWITH SHROUDED SHACKLE• Expert Quality• Steel lock body with electric coating and super
tough molybdenum steel shackle• Changeable six pin brass lock cylinder• Special bumper to prevent damage to locked item• Draper Security Rating: 10 out of 10
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
64196 46mm €58.27 €70.51 €30.95 €37.4564197 50mm €74.26 €89.85 €41.15 €49.7964198 61mm €128.64 €155.65 €72.95 €88.27
HEAVY DUTY SOLID STEELPADLOCKS• Expert Quality• Steel lock body with electric coating and
super tough molybdenum steel shackle• Changeable six pin cylinder• Dual steel ball mechanism• Draper Security Rating: 9 out of 10
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
64192 46mm €34.39 €41.61 €19.70 €23.8464193 54mm €43.22 €52.30 €23.95 €28.9864194 61mm €64.15 €77.62 €35.95 €43.5064195 70mm €82.54 €99.87 €45.50 €55.06
Stock No.69064EX. VAT INC VAT
List Price €86.35 List Price €104.49
*TSP €49.40 *TSP €59.77
Stock No.63806EX. VAT INC VAT
List Price €69.96 List Price €84.65
*TSP €37.80 *TSP €45.74
Stock No.64271EX. VAT INC VAT
List Price €5.40 List Price €6.53
*TSP €3.55 *TSP €4.30
ROUND MAGNIFIERS• Plastic lightweight magnifiers• Main lens magnification x 3 with inset x 6
Stock List Price List Price *TSP *TSPNo. Diameter Length ex. VAT Inc. VAT ex. VAT Inc. VAT
78474 50mm 125mm €5.78 €7.00 €5.25 €6.3578475 65mm 150mm €7.34 €8.89 €6.65 €8.0578476 70mm 180mm €9.14 €11.06 €8.25 €9.98
KEYED ALIKEVERSION AVAILABLE
Look for the "KEYED ALIKE VERSIONAVAILABLE" logo on many of our padlocks.For a small charge we can customize yourpadlocks as a "keyed alike" version and cansupply as many as you require with onecombination of lock.Contact the Draper Help Line on +44 (0)238049 4344 for further information on thisservice.
KEYED ALIKEVERSION AVAILABLE
KEYED ALIKEVERSION AVAILABLE
SC8
2M HEAVY DUTY SQUARELINK SECURITY CHAIN• Expert Quality• Hardened 10mm square link chain• Nylon cover to protect locked item
KC/96
96 HOOK KEY CABINET• Heavy duty gauge steel cabinet with lock• Supplied with stick-on reference numbers, wall fixings
and two keys• Size: 300 x 240 x 75mm
KI/48
48 PIECE KEY TAG ASSORTMENT• Coloured plastic indicator for keys• Comprises eight of each of the following colours:
orange, black, yellow, green, white and blue
Draper Tools has been chosen as thepreferred supplier to the mechanics
working on Santa Pod’sown show vehicles and
the engineers at “the pod”who use Draper Tools in
their day-to-daymaintenance of the track
and estate.
W2tools-5 EUR 9/9/11 13:09 Page 95
2professional power tools
Our award-winning Draper Expert Power tools have been designed for the discerning professional.This rangehas the features and reliability demanded in the busy workshop.
All the machines shown on this page have full after sales service and a two year warranty.
96
Stock No.41424EX. VAT INC VAT
List Price €187.03 List Price €226.31
*TSP €167.98 *TSP €203.25
Stock No.03286EX. VAT INC VAT
List Price €256.78 List Price €310.70
*TSP €184.71 *TSP €223.50
Stock No.03287EX. VAT INC VAT
List Price €204.14 List Price €247.01
*TSP €155.95 *TSP €188.70
Stock No.36986EX. VAT INC VAT
List Price €384.58 List Price €465.34
*TSP €298.76 *TSP €361.50
Stock No.41463EX. VAT INC VAT
List Price €114.10 List Price €138.06
*TSP €99.50 *TSP €120.40
Stock No.44190EX. VAT INC VAT
List Price €135.60 List Price €164.08
*TSP €120.00 *TSP €145.20
Specification:Drilling capacities:Mild Steel ... 12mmWood ... 26mmMasonry ... 13mmMaximum torque ... 35NmSpeed (no load) ... 0-350/1400r/minBlows per minute ... 18,000maxChuck capacity ... 2-13mmSpindle thread ... 1/2” x 20UNFWeight (inc. battery pack) ... 2.27kg
HD1150VK
1050W 230VHAMMERDRILL WITHKEYLESS CHUCK• Expert Quality• Variable speed control with lock button• Powerful 1050W motor• Two-speed synchronized aluminium gearbox• Reversing facility• 13mm metal keyless chuck• Soft grip handle• Adjustable side handle with metal depth rod• Supplied with: carrying case, 3M (approx.) cable and
approved plugSpecification:Drilling capacitiesMild Steel ... 13mmWood ... 30mmMasonry ... 16mmChuck capacity ... 1.5-13.0mmSpeed (no load) ... 0-1100/0-3000r/minSpindle thread ... 1/2” x 20UNFWeight ... 3.5kg
AP1500K
1500W 230V180mm ANGLEPOLISHER• Expert Quality• Soft start• Stepped speed
adjuster (100r/minper step)
• Digital speed display• Switch with lock-on
facility• Soft grip rear handle• Spindle lock button• External carbon
brushes• Hook and loop backing pad for easy bonnet change• Supplied with: carrying case, backing pad, wool
bonnet, 3M (approx.) cable and approved plugSpecification:Backing pad (supplied) ... 180mm dia.Bore diameter ... 22.2 dia. Spindle thread ... M14Speed (no load) ... 1000-3000r/minWeight ... 4kg
CHD182VNICD
18V CORDLESS COMBI HAMMERDRILL WITH TWO NI-CD BATTERIES• Expert Quality• Johnson 700 motor• Spindle lock for easy
bit change• Variable speed control• 24 position torque control • Two speed gearbox• 13mm keyless chuck• Electric brake• Overload protection• Forward/reverse
facility• Side handles• Soft grip handle • LED worklight• Supplied with: one screwdriver
bit, carrying case, two x 1.5AhNi-CD battery packs, 230V AC one hour fast chargerwith approved plug
CIW144VK
14.4V CORDLESS1/2" Sq. Dr. IMPACTWRENCH WITH TWONi-CD BATTERIES• Expert Quality• Compact high torque motor (176Nm)• Variable speed control• External changeable
carbon brushes• Electric brake• Forward/reverse
facility• Battery level
indicator• Soft grip handle and trigger• Supplied with: 2 x 14.4V 1.7Ah Ni-CD battery
packs, 230V AC one hour fast charger withapproved plug
Specification:Maximum torque ... 176Nm Impacts per minute ... 3000 max.Speed (no load) ... 0-2300r/minWeight (inc. battery pack) ... 1.9kg
CHD182VLI
18V CORDLESS COMBI HAMMERDRILL WITH TWO LI-ION BATTERIES• Expert Quality• Johnson 700 motor• Spindle lock for
easy bit change• Variable speed
control• 24 position torque control • Two speed gearbox• 13mm keyless chuck• Electric brake• Overload protection• Forward/reverse
facility• Side handle• Soft grip handle • LED worklight• Supplied with: one screwdriver
bit, carrying case, two x 1.3AhLi-ion battery packs, 230V AC one hour universal fastcharger with approved plug
Specification:Drilling capacities:Mild Steel ... 12mmWood ... 26mmMasonry ... 13mmMaximum torque ... 35NmSpeed (no load) ... 0-350/1400r/minBlows per minute ... 18,000maxChuck capacity ... 2-13mmSpindle thread ... 1/2” x 20UNFWeight (inc. battery pack) ... 1.91kg
CIW192V2K
19.2V CORDLESS1/2" Sq. Dr.IMPACT WRENCHKIT WITH TWO Ni-CDBATTERIES• Expert Quality• Compact hi-torque
motor(310Nm max.)
• Variable speedcontrol
• Electric brake• Forward/reverse
facility• Soft grip handle and
trigger• LED work light• Supplied with: three
1/2” sq. dr. impactsockets size 17, 19and 21mm, carryingcase, 2 x 19.2V 2.0Ah Sanyo Ni-CD battery packs, 230V AC one hour fastcharger with approved plug
Specification:Maximum torque ... 310Nm Impacts per minute ... 3000max.Speed (no load) ... 0-2500r/minWeight (inc. battery pack) ... 3.1kg
W2tools-5 EUR 9/9/11 13:09 Page 96
*Typical Selling Price - may vary in-store. 97
Stock No.41453EX. VAT INC VAT
List Price €71.59 List Price €86.63
*TSP €63.51 *TSP €76.85
Stock No.41454EX. VAT INC VAT
List Price €111.77 List Price €135.24
*TSP €99.50 *TSP €120.40
Stock No.41535EX. VAT INC VAT
List Price €8.14 List Price €9.84
*TSP €7.35 *TSP €8.89
Stock No.14428EX. VAT INC VAT
List Price €57.96 List Price €70.13
*TSP €56.98 *TSP €68.95
Stock No.40764EX. VAT INC VAT
List Price €72.26 List Price €87.44
*TSP €63.60 *TSP €76.96
Stock No.42638EX. VAT INC VAT
List Price €324.98 List Price €393.23
*TSP €282.02 *TSP €341.25
Stock No.42641EX. VAT INC VAT
List Price €514.42 List Price €622.44
*TSP €420.00 *TSP €508.20
AG2232
230V 230mm ANGLE GRINDER
• Expert Quality• Powerful motor• Soft start electronics• Three position side handle• 180° rotating rear handle• Soft grip handles• Spindle lock facility• Supplied with: reversible lock nut and flange, disc
changing spanner, 3M (approx.) cable and approved plugSpecificationBore diameter ... 22.2mmSpindle thread ... M14Speed (no load) ... 6500r/minWeight ... 6kg
CWMF2
353 x 25.4 x 2.8mm FLAT METALCUTTING WHEEL• Manufactured to EN 12413 Specifications• Glassfibre reinforced resinoid bonded aluminium oxide• Grit grade A30-S-BF 80 medium hard• Maximum working speed 80m/sec.
HG2003
2000W 230V VARIABLE HEAT HOTAIR GUN KIT
• Expert Quality• Variable heat settings (50°C to
600°C) with LED heat display• Ideal for paint stripping, thawing pipes etc. • Complete with four nozzles, glass protection,
reflector hook, concentrator and scraper• Supplied with 3M (approx.) cable and
approved plug
GD16/16AC
550W 230V 16 SPEED GENERALWORKSHOP BENCH DRILLSpecification:Drilling capacity ... 16mmChuck capacity ... 3-16mmCollar diameter ... 60mmSpindle taper ... MT2Speeds (r/min) ... 16 (210-3340)Swing ... 330mmSpindle travel ... 80mmColumn diameter ... 70mmTable size ... 260 x 260mmThroat depth ... 160mmBase size ... 420 x 450mmHeight ... 990mmWeight ... 67kg
Specification:Drilling capacity ... 19mmChuck capacity ... 3-16mmCollar diameter ... 60mmSpindle taper ... MT2Speeds (r/min) ... 16 (120-3000)Swing ... 356mmSpindle travel ... 80mmColumn diameter ... 80mmTable size ... 290 x 290mmThroat depth ... 180mmBase size ... 460 x 275mmHeight ... 1650mmWeight ... 98kg
HD19/16ACF
650W 230V 16SPEED FLOORSTANDING HEAVYDUTY DRILL
Heavy Duty!The ideal drill for those heavy dutyworkshop applications - featuring a19mm drilling capacity.
CD182V2
18V CORDLESSROTARY DRILL KITWITH TWO BATTERIES• Variable speed control• 17 position torque control• Soft grip handle• Forward /reverse facility• Screwdriver bit storage
compartment• Supplied with: two
double-endedscrewdriver bits,6 x screwdriver bits, 6 x HSS drill bits, bit adaptor,adaptor/charger, two 18V battery packs, carrying caseand 230V AC adaptor/charger (3-5 hours
Specification:Drilling capacities:Mild steel ... 10mmWood ... 20mmSpeed (no load) ... 0-900r/minChuck capacity ... 10mmSpindle thread ... 3/8” x 24UNFWeight (machine only) ... 1.7kg 2
AG1190
900W 230V 115mm ANGLE GRINDER
• Expert Quality• Powerful motor• Soft start and constant electronics• Three position side handle• Spindle lock facility• Soft grip housing panel• Tool-free guard adjustment• Supplied with: reversible locknut, flange, disc changing
spanner, 3M (approx.) cable and approved plugSpecification:Bore diameter ... 22.2mmSpindle thread ... M14Speed (no load) ... 10,000r/minWeight ... 2.5kg
2
2
W2tools-5 EUR 9/9/11 13:09 Page 97
98
Stock No.40967EX. VAT INC VAT
List Price €41.45 List Price €50.15
*TSP €35.95 *TSP €43.50
Stock No.14271EX. VAT INC VAT
List Price €114.58 List Price €138.64
*TSP €94.83 *TSP €114.74
Stock No.29621EX. VAT INC VAT
List Price €123.82 List Price €149.82
*TSP €114.01 *TSP €137.95
Stock No.48498EX. VAT INC VAT
List Price €127.75 List Price €154.58
*TSP €114.00 *TSP €137.94
Stock No.48499EX. VAT INC VAT
List Price €273.94 List Price €331.46
*TSP €225.00 *TSP €272.25
Stock No.36313EX. VAT INC VAT
List Price €243.65 List Price €294.81
*TSP €198.02 *TSP €239.60
PT140AK
100 piece 140W 230V MULTI-TOOLKIT WITH FLEXIBLE DRIVE SHAFT• Electronic variable speed control• Suitable for drilling, milling, grinding, polishing,
engraving, cutting and many other tasks• Collet chuck• Supplied with carrying case, 2M (approx.) cable and
approved plugSpecification:Speed (no load) ... 15,000 - 35,000r/minWeight ... 700g
GHD150W
150mm 370W 230V BENCH GRINDERWITH WIRE WHEEL AND WORKLIGHT
• One fineand onewire wheel
• Grindingwheel dressersupplied
• Cable and approvedplug
Specification:Grinding wheel diameter ... 150mmWire wheel diameter ... 150mmBore size ... 12.7mmSpeed ... 2850r/minWeight ... 10.2kg
GHD200
200mm 550W 230V HEAVY DUTYBENCH GRINDER• One fine and one coarse grinding wheel• Integral cooling trough in base of the machine• cable and approved plug Specification:Grinding wheel diameter ... 200mmBore size ... 16mmSpeed ... 3000r/minWeight ... 21kg
WDV30SS
30L 1400W 230V WET AND DRYVACUUM CLEANER WITHSTAINLESS STEEL TANK• Robust model with 30L
stainless steel tank• Ideal for use in
the workshopand garageor DIY workaround the homeand garden
• Selection ofaccessoriesavailable
WDV50SS
50L 1400W 230V WET AND DRYVACUUM CLEANER WITH STAINLESSSTEEL TANK AND 230VPOWER TOOL SOCKET• Auto power tool socket
allows the user to plug ina power tool up to2200W and run itdirectly off the cleaner- useful for automaticdust extraction
• Selection ofaccessoriesavailable
WDV18
18L 1500W 230V WALL MOUNTABLE WET AND DRY VACUUM CLEANERWITH REMOTE CONTROL• Extra long 7M long flexible suction/blowing hose• Hand grip with remote control on/off switch allows access to distant areas whilst cleaner is on the wall.• Hoses can be attached to a suction or blowing function.• Supplied with a variety of accessoriesSpecification:Max. vacuum pressure ... 19KPa (190mbar)Max. air flow ... 65L/secTank volume ... 18LDimensions:- height ... 460mm- base ... 300 x 370mmWeight ... 9.4kg
2
Specification:Max. vacuum pressure ... 26KPa (260mbar)Max. air flow ... 70L/secTank volume ... 50LPower take off rating ... 2200WDimensions:- height (inc castors) ... 720mm- base ... 440 x 440mmWeight ... 10kg
Specification:Max. vacuum pressure ... 26KPa (260mbar)Max. air flow ... 70L/secTank volume ... 30LDimensions:- height (inc castors) ... 630mm- base ... 340 x 340mmWeight ... 9.3kg
wall mountable wet & dryvacuum cleaner with remote control
W2tools-5 EUR 9/9/11 13:09 Page 98
*Typical Selling Price - may vary in-store. 99
Stock No.14433EX. VAT INC VAT
List Price €329.26 List Price €398.40
*TSP €265.00 *TSP €320.65
Stock No.14435EX. VAT INC VAT
List Price €966.70 List Price €1169.70
*TSP €834.70 *TSP €1009.99
PPW540
5.5HP PETROL PRESSURE WASHER• Expert Quality• Ideal for rapid cleaning of large vehicles, caravans,
farm equipment, boats, driveways• For use where no mains power available• 4 stroke petrol engine• Supplied with 8M of heavy duty reinforced high
pressure hose, metal lance with brass gun and fivenozzle types
Specification:Engine ... 5.5HPDisplacement ... 163ccSpeed (no load) ... 3600r/minFlow rate ... 9L/min (540L/hr)Working pump pressure ... 145bar (2100psi)Max. pump pressure ... 160bar (2320psi)Fuel tank capacity ... 3.6LWeight (dry) ... 35kg
Stock No.77593EX. VAT INC VAT
List Price €451.73 List Price €546.59
*TSP €399.59 *TSP €483.50
Stock No.03244EX. VAT INC VAT
List Price €849.48 List Price €1027.87
*TSP €645.04 *TSP €780.50
PPW900
9HP PETROL PRESSURE WASHER• Expert Quality• Ideal for rapid cleaning of large vehicles,
caravans, farm equipment, boats, driveways• For use where no mains power available• Brass pump head with pressure regulator• 4 stroke petrol engine• Supplied with 10M of heavy duty
reinforced high pressure hose,metal lance with brass gun andfour nozzle types
• Caution: Owing to the water pressureproduced by these machines, they areunsuitable for use on domestic vehicles
Stock No.03245EX. VAT INC VAT
List Price €1448.71 List Price €1752.94
*TSP €1109.88 *TSP €1342.95
pressurewashers
Specification:Engine ... 9HPDisplacement ... 270ccSpeed (no load) ... 3400r/minFlow rate ... 15L/min (900L/hr)Working pump pressure ... 200bar (2900psi)Fuel tank capacity ... 6LWeight (dry) ... 53kg
Specification:Working pump pressure ... 120bar (1740psi)Max. pump pressure ... 140bar (2030psi)Flow rate ... 7L/min (420L/hour)Size approx. (inc. handle) ... 300 x 320 x 910mmWeight ... 19kg
Specification:Working pump pressure ... 135bar(1955psi)Flow rate ... 7L/min (420L/hour)Size approx. (inc. handle) ... 360 x 530x 950mmWeight ... 40kg
PW2110
2100W 230V PRESSURE WASHERWITH TOTAL STOPFEATURE• Portable pressure washer
for domestic use, ensuresefficient cleaning of vehicles,caravans, motor vans,driveways, boats etc.
• The Total Stop Valveautomatically activatesand deactivates the highpressure cleaner everytime the trigger is operatedthus increasing the life ofthe motor and reducingelectricity consumption
• Supplied with 8M of highpressure hose on hose cartwheel with gun, turbo lance,adjustable fan jet lance,built-in detergent tank,wheels, cable andapproved plug
HPW2110
2100W 230V HOT WATER PRESSUREWASHER WITH TOTAL STOP FEATURE• Ideal for the rapid cleaning of cars,
vans, motorbikes, garden furniture.Water is pre-heated between 50 and80°C (dependent on ambient inletwater temperature) by thediesel-powered boiler. The machine isgreat for cleaning oily floors andgreasy surfaces. The Total Stop Valveautomatically activates and deactivatesthe high pressure cleaner every timethe trigger is operated thusincreasing the life of themotor and reducingelectricity consumption
• Flow rate of 7L perminute
• Supplied with 8M ofreinforced hose,turbo lance,adjustable lance,heavy duty gun,wheels, cable andapproved plug
Specification:Engine ... 6.5HPDisplacement ... 196ccSpeed (no load) ... 3600r/minFlow rate ... 11.5L/min (690L/hr)Working pump pressure ... 200bar (2900psi)Fuel tank capacity ... 6LWeight (dry) ... 40kg
PPW690
6.5HP PETROL PRESSURE WASHER• Expert Quality• Ideal for rapid cleaning of large vehicles, caravans, farm
equipment, boats, driveways• For use where no mains
power available• 4 stroke petrol engine• Supplied with 8M of
heavy duty reinforcedhigh pressure hose,metal lance withbrass gun andfour nozzletypes
W2tools-5 EUR 9/9/11 13:09 Page 99
100
PG25OF
2.2kVA/2.0kWPETROL GENERATOR• Expert Quality• Powered by 6.5HP petrol engine •Recoil start • Steel tubular frame withpolyester coated finish • Oil and fuelresistant anti-vibration mounts • Dualvoltage output 110/230V • Overallsize: 575 x 425 x 435mm • Suppliedwith spark plug and screwdriver
Stock No.09697EX. VAT INC VAT
List Price €408.36 List Price €494.12
*TSP €354.01 *TSP €428.35
DSH51
51,000 (15kW) BTUDIESEL/KEROSENE SPACE HEATER• Suggested heating area; up to 8000cu. ft• Size L x W x H (approx.): 670 x 280 x 350mm• Weight (approx.): 21kg
Stock No.39076EX. VAT INC VAT
List Price €431.30 List Price €521.88
*TSP €371.89 *TSP €449.99
DSH71
68,200 (20kW) BTUDIESEL/KEROSENE SPACE HEATER• Suggested heating area: up to 8900cu.ft• Size L x W x H (approx.): 690 x 400 x 720mm• Weight (approx.): 24kg
Stock No.19749EX. VAT INC VAT
List Price €450.00 List Price €544.50
*TSP €384.01 *TSP €464.65
DSH102
102,420 (30kW) BTU 230VDIESEL/KEROSENE SPACE HEATER• Suggested heating area: up to 17,000cu.ft • Size L x W x H (approx.): 880 x 450 x 630mm• Weight (approx.): 30kg
Stock No.19750EX. VAT INC VAT
List Price €572.90 List Price €693.21
*TSP €498.02 *TSP €602.60
DSH170
170,000 (50kW) BTUDIESEL/KEROSENE SPACE HEATER• Suggested heating area: up to 28,000cu. ft• Size L x W x H (approx.): 950 x 570 x 720mm• Weight (approx.): 35kg
Stock No.39277EX. VAT INC VAT
List Price €711.12 List Price €860.46
*TSP €582.00 *TSP €704.22
DSH71SS
68,200 (20kW) 230V BTU STAINLESSSTEEL DIESEL/KEROSENE SPACEHEATER• Suggested heating area: up to 8900cu. ft• Size L x W x H (approx.): 690 x 400 x 520mm• Weight: 24kg
Stock No.39077EX. VAT INC VAT
List Price €493.87 List Price €597.59
*TSP €426.03 *TSP €515.50
DSH102SS
102,420 (30kW) 230V BTUSTAINLESS STEEL DIESEL/KEROSENESPACE HEATER• Suggested heating area: up to 17,000cu. ft• Size L x W x H (approx.): 880 x 450 x 630mm• Weight (approx.): 35kg
Stock No.39275EX. VAT INC VAT
List Price €643.37 List Price €778.48
*TSP €528.00 *TSP €638.88
spaceheaters
For use in open and semi-open locations only. Direct combustion of fuel, asthe exhaust gases are mixed with air they are discharged to give a high heatoutput. High performance stainless steel burner assembly. Fitted with UVflame safety device and dual fuel filter. Connector for use with externalthermostat controller.
PG3500R
3.5kVA/2.8kWPETROL GENERATOR• Expert Quality• Powered by Honda 6.5HP petrol engine• Heavy duty steel tubular frame withpolyester coated finish • Oil and fuelresistant anti-vibration mounts • Dual voltageoutput 220/110V • Engine low oil shutdown• Maintenance-free alternator • Run time 150min@ 75% load • Fuel tank capacity 3.6L• Overall size 600 x 410 x 400mm • Weight 45kg
Stock No.43727EX. VAT INC VAT
List Price €850.51 List Price €1029.12
*TSP €802.80 *TSP €971.39
W2tools-5 EUR 9/9/11 13:09 Page 100
*Typical Selling Price - may vary in-store. 101
Stock No.39038EX. VAT INC VAT
List Price €134.23 List Price €162.42
*TSP €118.80 *TSP €143.75
Stock No.19751EX. VAT INC VAT
List Price €139.58 List Price €168.90
*TSP €126.03 *TSP €152.50
Stock No.19752EX. VAT INC VAT
List Price €215.59 List Price €260.87
*TSP €198.02 *TSP €239.60
Stock No.19753EX. VAT INC VAT
List Price €244.32 List Price €295.63
*TSP €233.88 *TSP €282.99
Stock No.49166EX. VAT INC VAT
List Price €541.80 List Price €655.58
*TSP €486.00 *TSP €588.06
Stock No.39039EX. VAT INC VAT
List Price €147.70 List Price €178.71
*TSP €132.02 *TSP €159.75
Stock No.39040EX. VAT INC VAT
List Price €255.67 List Price €309.36
*TSP €245.99 *TSP €297.65
Stock No.39041EX. VAT INC VAT
List Price €291.26 List Price €352.43
*TSP €252.00 *TSP €304.92
keep warm with our range ofdiesel/kerosene and propane mix.space heaters
PSH10
34,000 (10kW) 230V BTU PROPANEMIX SPACE HEATER• For use in open and semi-open environments• Suggested heating area: up to 4000cu. ft• High performance stainless steel burner assembly with
control box rated to IP44• Thermostat and thermocouple with solenoid for flame
safety• Gas hose regulator, cable and approved plug• Size L x W x H (approx.): 380 x 230 x 340mm• Weight: 5.6kg
PSH41
40,900 BTU (12kW) 230V PROPANEMIX SPACE HEATER• For use in open and semi-open environments• Suggested heating area: up to 5000cu.ft• High performance stainless steel burner assembly with
control box rated to IP44• Thermostat and thermocouple with solenoid for flame
safety• Piezo push button ignition• Gas hose, cable and approved plug• Size L x W x H (approx.): 420 x 240 x 270mm• Weight: 6.7kg
PSH105
102,000 BTU (30kW) 230VPROPANE MIX SPACEHEATER WITH WHEELS• For use in open and semi-open environments• Suggested heating area: up to 13,000cu. ft• High performance stainless steel burner
assembly with control box rated to IP44• Thermostat and thermocouple with solenoid
for flame safety• Piezo push button ignition• Gas regulator hose, cable and
approved plug• Size L x W x H (approx.):
535 x 240 x 470mm• Weight: 7.9kg
PSH136
136,000 BTU (40kW) 230VPROPANE MIX SPACEHEATER WITH WHEELS• For use in open and semi-open environments• Suggested heating area: up to 23,000cu. ft• High performance stainless steel burner
assembly with control box rated to IP44• Thermostat and thermocouple with solenoid
for flame safety• Piezo push button ignition• Gas hose regulator, cable and
approved plug• Size L x W x H (approx.):
600 x 260 x 470mm• Weight: 9.5kg
PSH301
235,424 BTU (69kW)110/230V PROPANE MIXSPACE HEATER• For use in open and semi-open
environments• Suggested heating area: up to 35,000cu.ft• High performance steel burner assembly
with control box rated to IP44• Thermostat and thermocouple with
solenoid for flame safety• Gas hose regulator, cable and
approved plug• Size L x W x H (approx.):
600 x 340 x 440mm• Weight: 18.5kg
PSH41SS
40,000 BTU (10kW) 230V STAINLESSSTEEL PROPANE MIX SPACE HEATER• For use in open and semi-open environments• Suggested heating area: up to 5000cu. ft• High performance stainless steel burner assembly with
control box rated to IP44• Thermostat and thermocouple with solenoid for flame
safety• Gas hose regulator, cable and approved plug• Size L x W x H (approx.): 380 x 210 x 250mm• Weight: 6.7kg
PSH105SS
102,000 BTU (30kW) 230V STAINLESS STEEL PROPANESPACE HEATER WITH WHEELS• For use in open and semi-open environments• Suggested heating area: up to
13,000cu. ft• High performance stainless
steel burner assembly withcontrol box rated to IP44
• Thermostat and thermocouplewith solenoid for flame safety
• Gas hose regulator, cable andapproved plug
• Size L x W x H (approx.):590 x 300 x 470mm
• Weight: 8kg
PSH136SS
136,000 BTU (40kW) 230V STAINLESS STEEL PROPANEMIX SPACE HEATER WITH WHEELS• For use in open and semi-open environments• Suggested heating area: 23,000cu. ft• High performance stainless steel
burner assembly with controlbox rated to IP44
• Thermostat andthermocouple withsolenoid for flame safety
• Gas hose regulator, cableand approved plug
• Size L x W x H (approx.):600 x 260 x 470mm
• Weight: 9.5kg
W2tools-6 EUR 9/9/11 13:11 Page 101
102
METRIC HSS COBALT TWIST DRILLS• Expert Quality• Manufactured to DIN338 and ISO235/1 Specifications• High speed steel straight shank drills (with 5% cobalt)• The addition of cobalt to HSS adds strength and wear resistance for longer life
Stock List Price List Price *TSP *TSPNo. Diameter ex. VAT Inc. VAT ex. VAT Inc. VAT
76064 1.0mm €1.44 €1.74 €1.30 €1.5776066 1.5mm €1.58 €1.92 €1.45 €1.7576067 2.0mm €1.61 €1.95 €1.45 €1.7576068 2.5mm €1.63 €1.97 €1.50 €1.8276069 3.0mm €2.16 €2.61 €1.95 €2.3676071 3.5mm €2.40 €2.90 €2.15 €2.6076072 4.0mm €2.66 €3.22 €2.40 €2.9076073 4.5mm €2.90 €3.51 €2.65 €3.2176075 5.0mm €3.22 €3.89 €2.90 €3.5176076 5.5mm €3.38 €4.09 €3.05 €3.6976077 6.0mm €3.62 €4.39 €3.25 €3.9376078 6.5mm €4.01 €4.85 €3.60 €4.3676079 7.0mm €5.06 €6.13 €4.50 €5.4576080 7.5mm €5.35 €6.48 €4.85 €5.8776081 8.0mm €6.65 €8.04 €5.98 €7.2476082 8.5mm €7.13 €8.62 €6.45 €7.8076083 9.0mm €7.54 €9.12 €6.75 €8.1776085 9.5mm €8.40 €10.16 €7.50 €9.0876086 10.0mm €10.56 €12.78 €9.50 €11.5076087 10.5mm €10.68 €12.92 €9.65 €11.6876088 11.0mm €11.18 €13.53 €9.98 €12.0876089 11.5mm €12.17 €14.72 €10.95 €13.2576090 12.0mm €14.40 €17.42 €12.95 €15.6776091 12.5mm €15.46 €18.70 €13.95 €16.8876092 13.0mm €16.27 €19.69 €14.65 €17.73
METRIC HSS TWIST DRILLS• Expert Quality• Manufactured to DIN 338 and ISO 235/1 Specifications• High speed straight shank twist drills
Stock Drills List Price List Price *TSP *TSPNo. Diameter per card ex. VAT Inc. VAT ex. VAT Inc. VAT
53504 0.5mm 10 €5.64 €6.82 €5.10 €6.1753505 1.0mm 10 €5.64 €6.82 €5.10 €6.1753506 1.2mm 10 €5.86 €7.09 €5.25 €6.3553507 1.5mm 10 €5.86 €7.09 €5.25 €6.3553528 2.0mm 10 €5.86 €7.09 €5.25 €6.3553536 2.5mm 10 €5.86 €7.09 €5.25 €6.3553553 3.0mm 10 €5.86 €7.09 €5.25 €6.3553568 3.3mm 10 €8.50 €10.28 €7.65 €9.2553849 3.5mm 10 €8.50 €10.28 €7.65 €9.2553854 4.0mm 10 €8.50 €10.28 €7.65 €9.2553855 4.5mm 10 €9.89 €11.96 €8.90 €10.7754188 5.0mm 10 €9.89 €11.96 €8.90 €10.7754246 5.5mm 10 €12.79 €15.48 €11.50 €13.9254247 6.0mm 10 €14.50 €17.54 €12.98 €15.7154296 6.5mm 10 €16.78 €20.30 €14.98 €18.1354298 7.0mm 10 €18.86 €22.83 €16.98 €20.5454299 7.5mm 10 €21.82 €26.40 €19.65 €23.7854301 8.0mm 10 €23.78 €28.78 €21.45 €25.9554434 8.5mm 10 €25.82 €31.25 €23.24 €28.1254612 9.0mm 10 €31.10 €37.64 €27.98 €33.8654843 9.5mm 10 €34.42 €41.64 €30.98 €37.4954844 10.0mm 10 €37.37 €45.22 €33.65 €40.7254845 10.5mm 5 €24.00 €29.04 €21.60 €26.1454846 11.0mm 5 €25.10 €30.38 €22.60 €27.3554847 11.5mm 5 €27.53 €33.31 €24.75 €29.9554878 12.0mm 5 €29.28 €35.43 €26.35 €31.8854879 12.5mm 5 €32.16 €38.91 €28.95 €35.0354880 13.0mm 5 €34.68 €41.96 €31.25 €37.81
25HSS/S
25 PIECE METRIC HSS TWISTDRILL SET• Expert Quality• Manufactured to DIN 338 and ISO235/1
Specifications• Contents: 1-13mm
Stock No.43696EX. VAT INC VAT
List Price €67.37 List Price €81.52
*TSP €36.00 *TSP €43.56
DEPRESSED CENTRE STEELGRINDING DISCS• Glassfibre reinforced resinoid bonded
aluminium oxide• Grit grade A24-R-BF 80• Disc thickness 6mm• Maximum working speed 80m/sec
Stock List Price List Price *TSP *TSPNo. Diameter Bore ex. VAT Inc. VAT ex. VAT Inc. VAT
41520 100mm 16.0mm €1.75 €2.12 €1.60 €1.9441521 115mm 22.2mm €2.16 €2.61 €1.95 €2.3641524 230mm 22.2mm €6.24 €7.55 €5.65 €6.84
FLAT METAL CUTTING WHEELS• Manufactured to EN 12413 Specifications• Glassfibre reinforced resinoid bonded aluminium oxide• Grit grade A30-S-BF 80 medium hard• Maximum working speed 80m/sec.
Stock Dia./Bore/ List Price List Price *TSP *TSPNo. Thickness ex. VAT Inc. VAT ex. VAT Inc. VAT
41525 75/10/1.6mm €1.10 €1.34 €0.99 €1.2007986 100/10/1.6mm €1.34 €1.63 €1.25 €1.5141526 100/16/2.5mm €1.34 €1.63 €1.25 €1.5141528 115/22.2/1.2mm €1.82 €2.21 €1.65 €2.0041527 115/22.2/2.5mm €1.87 €2.27 €1.70 €2.0641530 125/22.2/2.5mm €1.97 €2.38 €1.75 €2.1241531 180/22.2/3.0mm €2.83 €3.43 €2.55 €3.0941533 230/22.2/2.0mm €4.42 €5.34 €3.98 €4.8241532 230mm/22.2/3.0mm €3.62 €4.39 €3.25 €3.9341534 300mm/25.4/2.8mm €5.98 €7.23 €5.40 €6.5341535 353mm/25.4/2.8mm €8.14 €9.84 €7.35 €8.89
DEPRESSED CENTRE METALCUTTING WHEELS• Manufactured to EN 12413 Specifications• Glassfibre reinforced cold pressed resinoid
bonded aluminium oxide• Grit grade A30-S-BF 80 medium hard• Maximum working speed 80m/sec.
Stock List Price List Price *TSP *TSPNo. Dia./Bore ex. VAT Inc. VAT ex. VAT Inc. VAT
41536 100/16mm €1.32 €1.60 €1.20 €1.4541537 115/22.2mm €1.78 €2.15 €1.60 €1.9341538 125/22.2mm €2.09 €2.53 €1.90 €2.3041539 230/22.2mm €3.84 €4.65 €3.50 €4.24
Draper Tools has been chosen as thepreferred supplier to the
mechanics working on SantaPod’s own show vehicles and
the engineers at “the pod”who use Draper Tools in
their day-to-daymaintenance of the track
and estate.
W2tools-6 EUR 15/9/11 13:00 Page 102
*Typical Selling Price - may vary in-store. 103
POLYCARBIDEABRASIVE WHEELS• For rust/paint removal in all
industries
Stock List Price List Price *TSP *TSPNo. Dia./Bore Max. Speed ex. VAT Inc. VAT ex. VAT Inc. VAT
77883 90/16.0mm 8500r/min €11.40 €13.79 €10.25 €12.4077884 100/22.2mm 7500 r/min €11.54 €13.97 €10.40 €12.5877885 115/22.2mm 6500r/min €13.30 €16.09 €11.95 €14.4677886 150/22.2mm 5000r/min €16.61 €20.10 €14.95 €18.0977887 180/22.2mm 4000r/min €26.38 €31.91 €23.75 €28.74
CRIMPED STEEL WIREBRUSHES• For use with Draper bench grinders
and other manufacturers similarmachines
• Supplied with reducing bushessize; 12.7, 16, 20, 22.2 and 26mm
Stock List Price List Price *TSP *TSPNo. Dia/Bore Width ex. VAT Inc. VAT ex. VAT Inc. VAT
33879 150/50mm 19mm €20.62 €24.95 €18.60 €22.5133880 200/50mm 25mm €32.86 €39.76 €29.60 €35.82
FLAT TOPDECARBONIZING WIREBRUSHES• Brassed crimped steel wire brush
with flat trim• 6mm diameter shanks• Brush length 25mm
Stock List Price List Price *TSP *TSPNo. Diameter ex. VAT Inc. VAT ex. VAT Inc. VAT
41437 13mm €4.87 €5.90 €4.40 €5.3241438 26mm €5.98 €7.23 €5.40 €6.53
DC2
2 pieceDECARBONIZINGBRUSH SET• Brassed crimped steel
wire brusheswith flat and pointed trims
• Shanks 6 x 35mm long
Stock No.41439EX. VAT INC VAT
List Price €9.89 List Price €11.96
*TSP €8.95 *TSP €10.83
TWIST KNOT WIRE CUPBRUSHES• For angle grinders• 0.5mm hardened steel wire• M14 thread
Stock List Price List Price *TSP *TSPNo. Diameter Max. Speed ex. VAT Inc. VAT ex. VAT Inc. VAT
41447 60mm 11,000r/min €11.30 €13.68 €10.25 €12.4041449 80mm 8500r/min €17.78 €21.52 €15.98 €19.3441450 100mm 8500r/min €22.70 €27.47 €20.45 €24.74
115mm ALUMINIUM OXIDEFLAP DISCS• Ideal for grinding and finishing• 22.2mm bore• No backing plate required for these discs• 3 discs per pack
Stock List Price List Price *TSP *TSPNo. Grit ex. VAT Inc. VAT ex. VAT Inc. VAT
21702 40 €10.15 €12.28 €9.15 €11.0721779 60 €10.15 €12.28 €9.15 €11.0721780 80 €10.15 €12.28 €9.15 €11.07
115mm ZIRCONIUM OXIDEFLAP DISCS• Superior performance which gives an
excellent finish• Outlasts conventional fibre discs• Self-sharpening and resin bonded for
longevity of life• Bore 22.2mm• Ideal for use on stainless steel• 3 discs per pack
Stock List Price List Price *TSP *TSPNo. Grit ex. VAT Inc. VAT ex. VAT Inc. VAT
21785 40 €17.11 €20.71 €15.40 €18.6321791 60 €17.11 €20.71 €15.40 €18.6321793 80 €17.11 €20.71 €15.40 €18.63
230V AC FOUR SOCKETINDUSTRIAL CABLE REELS• Max. load: 13A (fully unwound)• Sturdy metal frame with with easy wind
handle
Stock List Price List Price *TSP *TSPNo. Length ex. VAT Inc. VAT ex. VAT Inc. VAT
89928 25M Reel €72.84 €88.14 €34.50 €41.7589926 50M Reel €134.83 €163.15 €58.88 €71.25
assorted abrasivesQuality abrasive products for use around the
workshop, factory or office. All fully guaranteed andto Draper Tools’ rigorous standards.
W2tools-6 EUR 9/9/11 13:11 Page 103
104
Stock No.43944EX. VAT INC VAT
List Price €317.98 List Price €384.75
*TSP €294.00 *TSP €355.74
Stock No.43948EX. VAT INC VAT
List Price €559.34 List Price €676.81
*TSP €492.02 *TSP €595.35
Stock No.43951EX. VAT INC VAT
List Price €1117.63 List Price €1352.33
*TSP €990.00 *TSP €1197.90
Stock No.43952EX. VAT INC VAT
List Price €2367.19 List Price €2864.30
*TSP €1979.34 *TSP €2395.00
Stock No.43953EX. VAT INC VAT
List Price €350.14 List Price €423.66
*TSP €315.00 *TSP €381.15
weldingand weldingaccessories
AW222AT
200A 230/400V TURBO ARC WELDER• Extra heavy duty suitable for tough daily use in
industrial and agricultural environments • Input current16A • Stepless amperage adjustment • Thermaloverload protection • Detachable electrode holder andearth lead • Supplied with wheel kit, transport handle,face mask and combined chipping hammer/wire brush
Specification:Rated max. supply current ... 34/26A (230/400V)Rated eff. supply current ... 14/10A (230/400V)Output amperage range ... 45 - 200AElectrode size ... 1.6 - 5.0mmNo load voltage ... 43.5 - 49VDimensions ... 320 x 610 x 400mmWeight ... 19.7kg
MW142AT
145A 230V GAS/GASLESS TURBOMIG WELDER• Uses both solid or filler wire with a flux core • During
the weld process the flux melts and protects the weld,therefore no gas is required to shield the weld pool •Non-live direct fit safety torch • Four stage powersetting • Variable wire speed control • Thermal overloadprotection • Earth clamp • Polarity switch • Up to 5kgwire spool capacity • Supplied with wheel kit, spool of0.9mm flux cored wire, 0.9/1.2mm and 0.6 wire feederrollers and supports for re-useable gas bottles •Regulator supplied separately
Specification:Rated max. supply current ... 21.2ARated eff. supply current ... 8.5AInput current ... 16AOutput amperage range ... 30 - 145AAmperage at 60% duty ... 55ANo load voltage ... 30VWire sizes
mild steel ... 0.6 - 0.8mmstainless steel ... 0.8mmaluminium ... 0.8 - 1.0mmflux cored ... 0.9mm
Wire spool capacity ... up to 5kgDimensions ... 450 x 610 x 450mmWeight ... 30kg
MW182AT PRO
180A 230V GAS TURBO MIG WELDER• Euro torch connector • Six stage power setting •
Variable wire speed control • Thermal overloadprotection • Spot weld timer, burnback and soft start •Earth clamp • Reinforced bottle holder • Up to 15kgwire spool capacity • Supplied with: 0.6/0.8mm wirefeed roller, wheel kit, swivel joint Euro fit welding torch,gas bottle holder and chain restraints and 1.5M of gashose • Regulator sold separately
Specification:Rated max. supply current ... 26ARated eff. supply current ... 12AInput current ... 16AOutput amperage range ... 40 - 180AAmperage at 60% duty ... 75AOpen circuit voltage ... 19.5 - 33.5VWire sizes
mild steel ... 0.6 - 1.0mmstainless steel ... 0.8 - 1.0mmaluminium ... 0.8 - 1.0mm
Wire spool capacity ... up to 15kgDimensions ... 380 x 850 x 750mmWeight ... 54kg
MW302AT PRO
300A 230V GAS TURBO MIG WELDER• Euro torch connector • Twelve stage power setting •
Variable wire speed control • Thermal overloadprotection • Spot weld timer, burnback, soft start, 2Tand 4T modes • Earth clamp • Reinforced bottle holder• 15kg wire spool capacity • Supplied with: Wheel kit,0.6/0.8mm and 1.0/1.2mm wire feed rollers, gas bottleholder and chain restraints, 1.5M of gas hose, swiveljoint Euro fit welding torch and earth clamp • Regulatorsold separately
Specification:Rated max. supply current ... 42ARated eff. supply current ... 21.5AInput current ... 16AOutput amperage range ... 30 - 300AAmperage at 60% duty ... 150AOpen circuit voltage ... 18.5 - 45VWire sizes
mild steel ... 0.6 - 1.2mmstainless steel ... 0.8 - 1.2mmaluminium ... 0.8 - 1.2mm
Max. welding thickness ... 10mm - mild steelWire spool capacity ... up to 15kgDimensions ... 520 x 900 x 1050mmWeight ... 90kg
INV132
130A 230V ARC/TIG INVERTERWELDER KIT• DC Scratch start • Cold electrode start • Anti stick
device • Thermostatic control • Fan assisted • Suppliedwith electrode holder and earth lead, face mask andwelding brush. Fitted with 2M (approx.) cable andapproved plug
Specification:Rated max. supply current ... 26ARated eff. supply current ... 14AInput current ... 13AOutput amperage range ... 5-130AAmps at 60% duty cycle ... 75AElectrode size ... 1.6-3.2mmOpen Circuit voltage ... 90VDimensions ... 275 x 130 x 170mmWeight ... 3.5kg
W2tools-6 EUR 9/9/11 13:11 Page 104
*Typical Selling Price - may vary in-store. 105
Stock No.43954EX. VAT INC VAT
List Price €415.22 List Price €502.42
*TSP €354.00 *TSP €428.34
Stock No.45348EX. VAT INC VAT
List Price €81.02 List Price €98.04
*TSP €43.20 *TSP €52.27
Stock No.57096EX. VAT INC VAT
List Price €227.76 List Price €275.59
*TSP €118.80 *TSP €143.75
Stock No.09116EX. VAT INC VAT
List Price €1175.59 List Price €1422.47
*TSP €960.00 *TSP €1161.60
Stock No.49160EX. VAT INC VAT
List Price €1556.11 List Price €1882.90
*TSP €1188.02 *TSP €1437.50
Stock No.49159EX. VAT INC VAT
List Price €844.06 List Price €1021.31
*TSP €744.00 *TSP €900.24
INV152
150A 230V ARC/TIG INVERTERWELDER KIT• DC scratch start • Cold electrode start • Anti stick
device • Thermal overload protection • Fan assisted •Supplied with electrode holder and earth lead, facemask, welding brush and carrying case
Specification:Rated max. supply current ... 27ARated eff. supply current ... 14AInput current ... 16AOutput amperage range ... 5-150AAmps at 60% duty cycle ... 110AElectrode size ... 1.6-4.0mmOpen Circuit voltage ... 90VDimensions ... 320 x 130 x 170mmWeight ... 4kg
W635
MMA KIT FOR ARC/TIGWELDER/INVERTERS• Comprising: earth clamp with 2M
cable and Dinse-typeconnector;electrode holderwith 3M cableand Dins-typeconnector;mask and chippinghammer/wire brush
• For use with DraperArc/TIG WeldersINV132 andINV152 shownon page 104opposite
W623
TIG WELDING TORCH• For use with Draper Arc/TIG Welders INV132 and
INV152 shown on page 104 opposite
TIG160H
160A 230V TIG HF WELDER• Microprocessor-controlled inverter technology • TIG
DC welding • Pre-gas and post-gas timeadjustment • Variable slope down • TIG lift • VRDreduces maximum unloaded open circuit voltage acrossthe output terminals of the welding machine to a safevoltage - below 25V in order to avoid electrical shocks
Specification:Rated max. supply current ... 14ARated supply current (25%) ... 24AInput current ... 16ACurrent range ... 4-160ADimensions ... 330 x 135 x 280mmProtection ... IP23Weight ... 7kg
IPC40T
40A 230V PLASMA CUTTER• Microprocessor controlled inverter technology • Suitable forcutting steel. stainless steel, aluminium, copper and brass upto 12mm thick • Thermal overload protection • Grid cuttingfunction for cutting punched metal sheet • Electric shockprotection • Air pressure protection • Supplied with plasmatorch with 6M (approx.) cable, 5M (approx.) earth lead withclamp, air regulator/filter with pressure gauge and 2M(approx.) mains cableSpecification:Rated max. supply current ... 4kWCutting current range ... 5-40AInput current ... 16ACutting range ... 12mm (max.)Open circuit cycle ... 280VAmperage at 60% duty ... 32AAir pressure ... 35-50 MPa (51-73psi)Air consumption ... 100L/minNo load voltage ... 20 - 34VDimensions ... 400 x 160 x 260mmWeight ... 9kg
SW2200M
2200A 230V STUD WELDER• Stud gun with lead and slide hammer attachment •
Earth clamp • Supplied with chuck for tri hook washer,hook for washers, electrodes for washer and ovalwashers, earth terminal clamp, spanner and a selectionof fittings
Specification:Rated max. supply current ... 4kWInput current ... 16AOutput amperage range ... 400-2200ASpot welding capacity ... 0.8+0.8mmOpen circuit voltage ... 7.4VDuty cycle ... 3.5%Torch cable length ... 3MEarth lead ... 2MDimensions ... 320 x 181 x 265mmWeight ... 20kg
W2tools-6 EUR 9/9/11 13:11 Page 105
106
Stock No.44998EX. VAT INC VAT
List Price €242.69 List Price €293.65
*TSP €142.95 *TSP €172.97
Stock No.08166EX. VAT INC VAT
List Price €92.16 List Price €111.51
*TSP €56.98 *TSP €68.95
Stock No.35138EX. VAT INC VAT
List Price €150.14 List Price €181.67
*TSP €83.99 *TSP €101.63
DA50/320B
50L 230V 1.5kW BELT-DRIVENAIR COMPRESSOR
Stock No.03237EX. VAT INC VAT
List Price €586.08 List Price €709.16
*TSP €455.00 *TSP €550.55
Specification:Air displacement ... 12.9cfm (365L/min)Free air delivered (FAD)at 116psi (8bar) ... 8.3cfm (234L/min)Free air delivered (FAD)at 145psi (10bar) ... 8.0cfm (225L/min)Input Current ... 13ASpeed ... 1375r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 100LDimensions ... 1070 x 450 x 770mmWeight ... 61.5kg
Stock No.03238EX. VAT INC VAT
List Price €736.20 List Price €890.80
*TSP €575.00 *TSP €695.75
PALLETIZED DELIVERIESThe products marked with this logo can only be delivered on a pallet.Prior to purchase please ensure you have adequate facilities to unloadpalletized deliveries. Contact your Draper stockist for local information.
weldinghelmets workshop
compressorsSpecification:Air displacement ... 8.3cfm (235L/min)Free air delivered (FAD)at 116psi (8bar) ... 5.8cfm (165L/min)Free air delivered (FAD)at 145psi (10bar) ... 5.3cfm (150L/min)Input Current ... 13ASpeed ... 1040r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 50LDimensions ... 870 x 400 x 700mmWeight ... 48.5kg
DA100/365B
100L 230V 2.2kW BELT-DRIVENAIR COMPRESSOR
W411D
SOLAR POWERED AUTO-VARIOSHADEWELDING HELMET• Industrial quality to EN179/379 and CE • 9-13EW shades immediately weld is struck• Failsafe switch if automatic power fails
W679
SOLAR POWERED AUTO-VARIOSHADEWELDING HELMET• Industrial quality• 9-13EW shade immediately weld is struck• Failsafe switch if automatic power fails
WGH2
SOLAR POWERED AUTO-VARIOSHADEWELDING AND GRINDING HELMET• Expert Quality• Glassfibre effect finish• BS EN 379:1994 and BS EN 175:1997 approved• Solar powered automatic shading facilities when arc is
struck• Adjustable shading from DIN 9-13• High impact polymide nylon for maximum protection.• Switching time less
than 0.0004 seconds• Convenient grinding
mode (shade 4)switch on side ofhelmet
W2tools-6 EUR 9/9/11 13:11 Page 106
*Typical Selling Price - may vary in-store. 107
Stock No.03239EX. VAT INC VAT
List Price €861.34 List Price €1042.22
*TSP €695.86 *TSP €841.99
Stock No.69337EX. VAT INC VAT
List Price €1047.02 List Price €1266.90
*TSP €809.00 *TSP €978.89
Stock No.77002EX. VAT INC VAT
List Price €982.80 List Price €1189.19
*TSP €834.00 *TSP €1009.14
Stock No.76120EX. VAT INC VAT
List Price €2356.49 List Price €2851.35
*TSP €1884.00 *TSP €2279.64
COMPRESSOR OIL• Blended amber coloured oil using a high VI premium grade base oil
and selective additives to provide long term protection and reliabilityfor compressors
• Suitable for single and multi-stage compressors up to temperaturesof 200°C
Specification:ISO VG Grade ... 46Density at 15°C ... 0.871Viscosity at 40°C ... 46.1Viscosity at 100°C ... 7.0Viscosity index ... 108
Stock List Price List Price *TSP *TSPNo. Volume ex. VAT Inc. VAT ex. VAT Inc. VAT
34683 1L €11.98 €14.49 €8.10 €9.8034684 5L €44.78 €54.19 €29.40 €35.57
compressor oil
DA150/365B
150L 230V 2.2kW BELT-DRIVEN AIR COMPRESSORSpecification:Air displacement ... 12.9cfm (365L/min)Free air delivered (FAD)at 116psi (8bar) ... 8.3cfm (234L/min)at 145psi (10bar) ... 8.0cfm (225L/min)Input Current ... 13ASpeed ... 1375r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 150LDimensions ... 1330 x 500 x 890mmWeight ... 110kg
DA150/392B
150L 230V 2.2kW STATIONARY BELT-DRIVENAIR COMPRESSORSpecification:Air displacement ... 13.8cfm (390L/min)Free air delivered (FAD) ... 9.3cfm (262L/min)Input Current ... 16ASpeed ... 1420r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 150LDimensions ... 1370 x 400 x 800mmWeight ... 75kg
DA200/300C
200L 230V 2.2kW V-TWIN BELT-DRIVENAIR COMPRESSORSpecification:Air displacement ... 10.4cfm (295L/min)Free air delivered (FAD) ... 7.2cfm (204L/min)Input Current ... 16ASpeed ... 1450r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 200LDimensions ... 1550 x 500 x 1000mmWeight ... 113kg
DA270/840
270L 415V 5.5kW BELT-DRIVEN STATIONARYAIR COMPRESSORSpecification:Air displacement ... 29.7cfm (846L/min)Free air delivered (FAD) ... 19cfm (541L/min)Input Current ... 32ASpeed ... 1370r/minMaximum pressure ... 145psi (10bar)Number of cylinders ... 2Receiver capacity ... 270LDimensions ... 1550 x 500 x 1000mmWeight ... 147kg
W2tools-6 EUR 9/9/11 13:11 Page 107
108
Draper Expert air tool rangeThese tools are designed for use in the professional workshop.With features to reduce weight, noise andvibration ensuring they are comfortable to use, yet strong enough to get the job done. Check out thespecification panels for each tool to see how hard we’ve worked to get them right.
Rotating air inlet toprevent air line tangle
Silenced air exhausts toreduce workshop noise
Compositebodies for light
weight and less user fatigue
Variable speed forversatility
feature packedSome of the incredible features of these air tools are shown below. All these tools now have a 12 months parts and labour warranty.
Vibration reduction Compact design
Stock No.14256EX. VAT INC VAT
List Price €130.39 List Price €157.77
*TSP €115.99 *TSP €140.35
Stock No.14257EX. VAT INC VAT
List Price €130.39 List Price €157.77
*TSP €115.99 *TSP €140.35
Stock No.43326EX. VAT INC VAT
List Price €146.18 List Price €176.88
*TSP €131.94 *TSP €159.65
Stock No.43327EX. VAT INC VAT
List Price €146.18 List Price €176.88
*TSP €131.94 *TSP €159.65
Stock No.41096EX. VAT INC VAT
List Price €136.97 List Price €165.73
*TSP €120.25 *TSP €145.50
Stock No.48413EX. VAT INC VAT
List Price €344.38 List Price €416.69
*TSP €290.04 *TSP €350.95
5205PRO1/4" Sq. Dr. MINI COMPOSITE BODYSOFT GRIP AIR IMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, twin hammer
action with easy forward and reverse one-handoperation
• Compact size and lightweight with ergonomic handledesign for user comfort
• Composite body makes this a lightweight but ruggedtool that reduces operator fatigue and the ‘cold sink’effect
Specification:Free speed ... 11,000r/minAverage air consumption ... 4cfm (114L/min)Weight ... 1kg
5206PRO3/8" Sq. Dr. MINI COMPOSITE BODYSOFT GRIP AIR IMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, twin hammer
action and reverse one-hand operation• Compact size and lightweight with ergonomic handle
design for user comfort• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Free speed ... 9000r/minAverage air consumption ... 4cfm (114L/min)Weight ... 1kg
5202PRO3/8" Sq. Dr. COMPACT COMPOSITEBODY AIR IMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, three speed,
twin hammer action with easy forward and reverse one-hand operation
• Compact size and lightweight with ergonomic handledesign for user comfort
• Rotating air inlet to prevent air lines tangling• The composite body makes this a lightweight but
rugged tool that reduces operator fatigue and the ‘coldsink’ effect
Specification:Free speed ... 9000r/minAverage air consumption ... 4.4cfm (125L/min)Weight ... 1.2kg
5203PRO1/2" Sq. Dr. COMPACT COMPOSITEBODY AIR IMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, three speed,
twin hammer action with easy forward and reverse one-hand operation
• Compact size and lightweight with ergonomic handledesign for user comfort
• Rotating air inlet to prevent air lines tangling.• The composite body makes this a lightweight but
rugged tool that reduces operator fatigue and the ‘coldsink’ effect
Specification:Free speed ... 11,000r/min)Average air consumption ... 4cfm (114L/min)Weight ... 1.2kg
5201PRO1/2" Sq. Dr. COMPOSITE BODY AIRIMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, twin hammer
action with easy forward and reverse one-handoperation
• Rotating air inlet to prevent air lines tangling.• The composite body makes this a lightweight but
rugged tool that reduces operator fatigue and the ‘coldsink’
Specification:Free speed ... 7000r/min)Average air consumption ... 4.4cfm (125L/min)Weight ... 2.2kg
5204PRO3/4" Sq. Dr. COMPOSITE BODY AIRIMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, twin hammer
action with easy forward and reverse one-handoperation
• Rotating air inlet to prevent air lines tangling.• The composite body makes this a lightweight but
rugged tool that reduces operator fatigue and the ‘coldsink’
Specification:Free speed ... 5500r/minAverage air consumption ... 6cfm (170L/min)Weight ... 3.4kg
W2tools-6 EUR 9/9/11 13:11 Page 108
*Typical Selling Price - may vary in-store. 109
long noseAn extremely tough long-nosewrench that allows access to fixingsin awkward locations...
Stock No.14211EX. VAT INC VAT
List Price €466.22 List Price €564.13
*TSP €404.95 *TSP €489.99
Stock No.14199EX. VAT INC VAT
List Price €110.64 List Price €133.87
*TSP €97.19 *TSP €117.60
Stock No.14210EX. VAT INC VAT
List Price €110.64 List Price €133.87
*TSP €97.23 *TSP €117.65
Stock No.47568EX. VAT INC VAT
List Price €75.07 List Price €90.84
*TSP €67.48 *TSP €81.65
Stock No.41099EX. VAT INC VAT
List Price €77.71 List Price €94.03
*TSP €69.55 *TSP €84.16
Stock No.14265EX. VAT INC VAT
List Price €117.22 List Price €141.83
*TSP €104.95 *TSP €126.99
5207PRO
1" Sq. Dr. COMPOSITE BODY LONGNOSE AIR IMPACT WRENCH• Expert Quality• Lower noise, low vibration, high torque, twin hammer
action with easy forward and reverse one-handoperation
• Compact size and lightweight with ergonomic handledesign for user comfort
• 150mm long anvil• Rotating air inlet to prevent air lines tangling• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Free speed ... 5500r/minAverage air consumption ... 7cfm (178L/min)Weight ... 4.3kg
5219PRO1/4" Sq. Dr. STUBBY COMPOSITEBODY REVERSIBLE AIR RATCHET• Expert Quality• Lower noise, low vibration, low weight with silenced
motor outlet for maximum user comfort• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Free speed ... 350r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 400g
5218PRO3/8" Sq. Dr. STUBBY COMPOSITEBODY REVERSIBLE AIR RATCHET• Expert Quality• Lower noise, low vibration, low weight with wobble
anvil and silenced motor outlet for maximum usercomfort
• Composite body makes this a lightweight but ruggedtool that reduces operator fatigue and the ‘cold sink’effect
Specification:Free speed ... 350r/min)Average air consumption ... 4.0cfm (114L/min)Weight ... 400g
5224PRO3/8" Sq. Dr. SOFT GRIP REVERSIBLEAIR RATCHET• Expert Quality• Lower noise, low vibration soft grip ratchet designed
for the professional user• Rotating air inlet to prevent air lines tangling• Rubber boot around ratchet head to minimise in use
damageSpecification:Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.2kg
5295PRO1/2" Sq. Dr. SOFT GRIP REVERSIBLEAIR RATCHET• Expert Quality• Lower noise, low vibration, soft grip ratchet designed
for the professional user• Rear rotating exhaust for user comfort• Hardened ratchet housing for long lifeSpecification:Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.2kg
5275K/PRO
COMPACT COMPOSITE BODYREVERSIBLE AIR DRILL WITH 6mmKEYLESS CHUCK• Expert Quality• Lower noise, low vibration• Lightweight and powerful with a reversing facility,
planetary gear system, variable speed trigger and Jacobskeyless chuck
• Composite body makes this a lightweight but rugged toolthat reduces operator fatigue and the ‘cold sink’ effect
Specification:Free speed ... 2600r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 660g
W2tools-6 EUR 9/9/11 13:11 Page 109
110
Stock No.14258EX. VAT INC VAT
List Price €86.93 List Price €105.18
*TSP €79.96 *TSP €96.75
Stock No.14266EX. VAT INC VAT
List Price €122.50 List Price €148.22
*TSP €107.94 *TSP €130.61
Stock No.14193EX. VAT INC VAT
List Price €127.75 List Price €154.58
*TSP €113.95 *TSP €137.88
Stock No.14197EX. VAT INC VAT
List Price €160.68 List Price €194.42
*TSP €138.90 *TSP €168.07
Stock No.14263EX. VAT INC VAT
List Price €310.82 List Price €376.10
*TSP €258.00 *TSP €312.18
Stock No.14261EX. VAT INC VAT
List Price €346.37 List Price €419.11
*TSP €282.00 *TSP €341.22
5276K/PRO
COMPOSITE BODY SOFT GRIPREVERSIBLE AIR DRILL WITH 10mmKEYLESS CHUCK• Expert Quality• Lower noise, low vibration, soft grip workshop air drill• Lightweight and powerful with a reversing facility,
planetary gear system, variable speed trigger andJacobs keyless chuck
• Rotating air inlet to prevent air lines tangling• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Spindle thread ... 3/8” x 24 tpiFree speed ... 1800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg
5277K/PRO
COMPOSITE BODY SOFT GRIPREVERSIBLE AIR DRILL WITH 13mmKEYLESS CHUCK• Expert Quality• Lower noise, low vibration, soft grip workshop air drill• Lightweight and powerful with a reversing facility,
planetary gear system, variable speed trigger, sidehandle and Jacobs keyless chuck
• Rotating air inlet to prevent air lines tangling• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Spindle thread ... 3/8” x 24 tpiFree speed ... 800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.3kg
5240PRO
COMPOSITE BODY SOFT GRIP AIRSCREWDRIVER• Expert Quality• Lower noise, low vibration workshop air screwdriver• Lightweight and powerful with a reversing facility,
planetary gear system and quick change chuck• Silenced motor outlet for maximum user comfort• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Hex. drive ... 1/4”Free speed ... 1800r/minTorque ... 10-90lb-in (1.13-10.17Nm)Average air consumption ... 4cfm (114L/min)Weight ... 1.3kg
5241PRO
COMPOSITE BODY IN-LINE AIR SCREWDRIVER• Expert Quality• Lower noise, low vibration workshop air screwdriver• Lightweight and powerful with a reversing facility, planetary gear system , quick change chuck and suspension loop• Externally adjustable cushion clutch for precise tightening torque. • Silenced motor outlet for maximum user comfort• Composite body makes this a lightweight but rugged tool that reduces operator fatigue and the ‘cold sink’ effectSpecification:Hexagon drive ... 1/4”Free speed ... 1800r/minTorque ... 10-90lb-in (1.13-10.17Nm)Average air consumption ... 4cfm (114L/min)Weight ... 1.2kg
5248PRO
6-13mm SOFT GRIP AIR BELT SANDER KIT• Expert Quality,• Contents: sander, four interchangeable contact arms and a selection of polycarbide and
abrasive sanding belts. Uses 6 or 13 x 300mm sanding belts• Adjustable belt tracking, safety lever and rotating air inlet to prevent air lines tanglingSpecification:Belt sizes ... 6 and 13 x 300mmAverage air consumption ... 4.0cfm (114L/min)Free speed ... 22,000r/minWeight ... 1kg
5249PRO
6-25mm SOFT GRIP AIR BELT SANDER KIT• Expert Quality,• Contents: sander, five interchangeable contact arms and a selection of polycarbide and
abrasive sanding belts• Uses 6, 10, 13 and 20 x 460mm sanding belts• Adjustable belt tracking, safety lever and rotating air inlet to prevent air lines tangling• Adustable exhaust to direct air away from user and workpieceSpecification:Belt sizes ... 6, 10, 13 and 20 x 460mmAverage air consumption ... 4.0cfm (114L/min)Free speed ... 18,000r/minWeight ... 1.3kg
soft grip air belt sander kits
W2tools-6 EUR 9/9/11 13:11 Page 110
*Typical Selling Price - may vary in-store. 111
Stock No.14198EX. VAT INC VAT
List Price €175.18 List Price €211.96
*TSP €153.98 *TSP €186.32
Stock No.47617EX. VAT INC VAT
List Price €115.90 List Price €140.23
*TSP €104.95 *TSP €126.99
Stock No.47616EX. VAT INC VAT
List Price €115.90 List Price €140.23
*TSP €105.00 *TSP €127.05
Stock No.47623EX. VAT INC VAT
List Price €421.44 List Price €509.94
*TSP €378.00 *TSP €457.38
Stock No.47570EX. VAT INC VAT
List Price €113.28 List Price €137.07
*TSP €102.98 *TSP €124.60
composite body
air toolsThese composite bodied air tools areeasier on the hand and also reduce
the ‘cold sink’ effect.
Stock No.47622EX. VAT INC VAT
List Price €200.18 List Price €242.22
*TSP €183.02 *TSP €221.45
5233PRO
150mm COMPOSITE BODY VERTICALPOLISHER• Expert Quality, lower noise, low vibration • Silenced motor outlet for maximum user comfort• Adjustable exhaust to direct air away from user and
workpiece• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
Specification:Spindle size ... 5/16” x 24Average air consumption ... 4cfm (114L/min)Weight ... 1.1kg
5229PRO
50/75mm COMPACT DUAL ACTIONSOFT GRIP AIR SANDER KIT• Expert Quality• Contents: sander; 50mm backing pad; 75mm backing
pad; 30 x 50mm/30 x 75mm assorted grit hook andloop sanding discs
• Lower noise. low vibration, low weight compact sanderideal for small scale surface repairs and intricate items
Specification:Pad sizes ... 50 and 75mmOrbits per minute ... 10,000Orbit diameter ... 5mmAverage air consumption ... 4.0cfm (113L/min)Weight ... 0.6kg
5230PRO
75mm COMPACT SOFT GRIP AIRPOLISHER KIT• Expert Quality• Contents: pads and polishing bonnets• For small scale surface polishingSpecification:Speed (no load) ... 2500r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 0.6kg
5232PRO KIT
SOFT GRIP AIR SURFACEPREPARATION/CONDITIONING KIT• Expert Quality• For the preparation of surfaces prior to remedial work• Two rubber wheels for the removal of graphics and
decals, four rotary wire and polycarbide wheels for theremoval of rust, tar, caulks, underbody coatings etc.
• Low noise/low vibration/low weight with soft griprubber side handle and body
• Wheel guard to protect users against debris whilstusing
Specification:Speed (no load) ... 3500r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1kg
5225PRO
50mm COMPACT AIR ANGLEGRINDER KIT• Expert Quality• Lower noise, low vibration, low weight with variable
speed motor and steel throttle lever with sprung safetylock-off
• Supplied with four grinding wheelsSpecification:Spindle thread ...3/8 x UNFSpeed (no load) ... 20,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 750g
5231PRO
150mm COMPOSITE BODY DUALACTION SOFT GRIP SANDER• Expert Quality• Lower noise, low vibration, low weight with soft grip
handle• One or two handed operation due to double action
control lever• Suitable for use with centralized dust extraction vacuum
system• Ideal for working on body filler and contoured surfaces• The composite body makes this a lightweight but
rugged tool that reduces operator fatigue and the ‘coldsink’ effect
Specification:Spindle size ... 5/16” x 24Orbit diameter ... 5mmOrbits per minute ... 10,000Average air consumption ... 3.0cfm (85L/min)Weight ... 1kg
W2tools-6 EUR 9/9/11 13:12 Page 111
112
Stock No.47569EX. VAT INC VAT
List Price €85.61 List Price €103.59
*TSP €78.50 *TSP €94.99
Stock No.47571EX. VAT INC VAT
List Price €140.93 List Price €170.52
*TSP €129.00 *TSP €156.09
Stock No.47572EX. VAT INC VAT
List Price €184.39 List Price €223.11
*TSP €165.00 *TSP €199.65
Stock No.47565EX. VAT INC VAT
List Price €52.68 List Price €63.74
*TSP €44.96 *TSP €54.40
Stock No.47564EX. VAT INC VAT
List Price €79.03 List Price €95.63
*TSP €70.79 *TSP €85.66
Stock No.47566EX. VAT INC VAT
List Price €65.86 List Price €79.69
*TSP €59.95 *TSP €72.54
draperexpert quality
body shop essentials
5226PRO
75mm SOFT GRIP REVERSIBLE AIRCUT-OFF TOOL• Expert Quality• Patented reversible mechanism to protect workpiece
from sparks• Variable speed motor; rotating air inlet to prevent air
line tangle and steel throttle lever with sprung safetylock-off
• Particularly suitable for use in confined working spaceson autobody repair work
Specification:Disc size ... 75 x 1.6mmFree speed ... 18,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 900g
5227PRO
100mm SOFT GRIP LONG NOSE AIRCUT-OFF TOOL• Expert Quality• Long body specially designed for better access for
cutting exhaust pipes and other auto body panels orlight sheet metal
• Incorporates a safety lever throttle switch• Variable speed motor• Rotating air inlet to prevent air line tangle• Steel throttle lever with sprung safety lock-offSpecification:Disc size ... 100 x 2mmFree speed ... 16,000r/minAverage air consumption ... 4.0cfm (114L/min)PWeight ... 1.8kg
5228PRO
115mm COMPOSITE BODY AIRANGLE GRINDER• Expert Quality• Lower noise and low vibration• Spindle lock for easy disc change• Composite body makes this a lightweight but rugged
tool that reduces operator fatigue and the ‘cold sink’effect
• Supplied with side handleSpecification:Spindle thread ... M14Speed (no load) ... 12,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 2kg
5221PRO
6mm COMPACT SOFT GRIP AIRANGLE DIE GRINDER• Expert Quality• Lower noise, low vibration, low weight• Ideal for grinding and polishing metal components such
as cylinder heads, valve ports and small industrialcomponents
• Variable speed motor• Rotating air inlet to prevent air line tangleSpecification:Free speed ... 25,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 540g
5220PRO
6mm COMPACT SOFT GRIP AIRANGLE DIE GRINDER WITH 115°HEAD• Expert Quality• Lower noise, low vibration, low weight• Ideal for grinding and polishing metal components such
as cylinder heads, valve ports and small industrialcomponents
• Variable speed motor• 115° head for access to awkward locations• Rotating air inlet to prevent air line tangleSpecification:Free speed ... 20,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 640g
5222PRO
6mm SOFT GRIP DIE GRINDER• Expert Quality• Low noise, low vibration• Ideal for grinding and polishing metal components such
as cylinder heads, valve ports and small industrialcomponents
• Variable speed motor• Rotating air inlet to prevent air line tangleSpecification:Free speed ... 20,000r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 700g
W2tools-6 EUR 9/9/11 13:12 Page 112
*Typical Selling Price - may vary in-store. 113
Stock No.55111EX. VAT INC VAT
List Price €92.21 List Price €111.57
*TSP €82.65 *TSP €100.01
Stock No.55360EX. VAT INC VAT
List Price €123.82 List Price €149.82
*TSP €111.50 *TSP €134.92
Stock No.55112EX. VAT INC VAT
List Price €148.82 List Price €180.08
*TSP €132.00 *TSP €159.72
Stock No.21661EX. VAT INC VAT
List Price €351.77 List Price €425.64
*TSP €309.95 *TSP €375.04
Stock No.52604EX. VAT INC VAT
List Price €57.96 List Price €70.13
*TSP €51.65 *TSP €62.50
Stock No.52602EX. VAT INC VAT
List Price €57.96 List Price €70.13
*TSP €52.79 *TSP €63.87
4201HDA1/2" Sq. Dr. HEAVY DUTY AIR IMPACTWRENCH• Quality heavy duty wrench with powerful torque from
the efficient motor• Ruggedly built for reliable use• One hand easy forward and reverse direction change• Variable position power regulator for simple speed and
power controlSpecification:Clutch type ... roller pinBolt capacity ... 16mmUltimate torque ... 280lb-ft (380Nm)Average air consumption ... 4.0cfm (114L/min)Weight ... 2.4kg
4201HDKA
15 PIECE 1/2" Sq. Dr. HEAVY DUTYAIR IMPACT WRENCH KIT• Contents: impact wrench, 10 x impact sockets,
extension bar and accessories• Quality heavy duty wrench with powerful torque from
the efficient motor• Ruggedly built for reliable use• One hand easy forward and reverse direction change• Variable position power regulator for simple speed and
power controlSpecification - impact wrench:Clutch type ... roller pinBolt capacity ... 16mmUltimate torque ... 280lb-ft (380Nm)Average air consumption ... 4.0cfm (114L/min)Weight ... 2.4kg (machine only)
4229A3/4" Sq. Dr. AIR IMPACT WRENCH• Powerful heavy duty impact wrench with one hand easy
forward and reverse direction change• Ideal for heavy duty industrial and commercial workSpecification:Clutch type ... rocking dogBolt capacity ... 25mmUltimate torque ... 500lb-ft (678Nm)Average air consumption ... 7cfm (200L/min)Weight ... 4.6kg
4230
1" Sq. Dr. AIR IMPACT WRENCH• Powerful heavy duty impact wrench with one hand easy forward and reverse direction change• Ideal for heavy duty industrial and commercial workSpecification:Clutch type ... rocking dogBolt capacity ... 38mmUltimate torque ... 1100lb-ft (1492Nm)Operating air pressure ... 90psi (6.2bar)Average air consumption ... 12.0cfm (340L/min)Weight ... 12.6kg
4204BK
15 PIECE 3/8" Sq. Dr. REVERSIBLEAIR RATCHET KIT• Contents: reversible ratchet, 7 x impact sockets,
extension bar and accessories• Ideal for most applications in the automotive workshop• Suitable for radiator, fuel pump and spark plug removalSpecification:Ultimate torque ... 50lb-ft (68Nm)Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg (machine only)
4295BK
16 PIECE 1/2" Sq. Dr. REVERSIBLEAIR RATCHET KIT• Contents: reversible ratchet, 7 x impact sockets,
extension bar and accessories• Ideal for most applications in the automotive workshop• Suitable for radiator, fuel pump and spark plug removalSpecification - reversible ratchet:Ultimate torque ... 50lb-ft (68Nm)Free speed ... 150r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.1kg (machine only)
reversible air ratchet kits
W2tools-6 EUR 9/9/11 13:12 Page 113
professional air toolsDesigned to be used in demanding bodyshops, garages and other industrial environments,these tools are of the highest quality - you can rely on Draper.
114
Stock No.57676EX. VAT INC VAT
List Price €40.82 List Price €49.40
*TSP €37.18 *TSP €44.99
Stock No.51678EX. VAT INC VAT
List Price €58.20 List Price €70.42
*TSP €51.60 *TSP €62.44
Stock No.51677EX. VAT INC VAT
List Price €109.99 List Price €133.09
*TSP €89.99 *TSP €108.89
Stock No.61324EX. VAT INC VAT
List Price €139.70 List Price €169.04
*TSP €119.95 *TSP €145.14
Stock No.22321EX. VAT INC VAT
List Price €119.86 List Price €145.03
*TSP €107.95 *TSP €130.62
Stock No.58013EX. VAT INC VAT
List Price €105.36 List Price €127.49
*TSP €93.95 *TSP €113.68
Stock No.27639EX. VAT INC VAT
List Price €73.75 List Price €89.24
*TSP €66.00 *TSP €79.86
Stock No.59953EX. VAT INC VAT
List Price €85.61 List Price €103.59
*TSP €76.75 *TSP €92.87
Specification:Spindle size ... 5/8” UNFFree speed ... 2500r/minAverage air consumption ... 12cfm (342L/min)Weight ... 2kg
Specification:Free speed ... 4500r/minSpindle ... 5/8” x 11 tpiAverage air consumption ... 4.2cfm (119L/min)Weight ... 2kg
4273K
REVERSIBLE AIR DRILL WITH 10mmKEYLESS CHUCK• For general drilling work in the workshop and
automotive trade• Lightweight and powerful with a reversing facility• Jacobs keyless chuck
Specification:Spindle thread ... 3/8” x 24 tpiFree speed ... 1800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1kg
4274K
AIR DRILL WITH 13mm KEYLESSCHUCK• For general drilling work in the workshop and
automotive trade• Lightweight and powerful with a reversing facility• Jacobs keyless
chuck
Specification:Spindle thread ... 3/8” x 24 tpiFree speed ... 800r/minAverage air consumption ... 4.0cfm (114L/min)Weight ... 1.54kg
4416PRO
150mm PROFESSIONAL DUAL ACTIONDUST-FREE AIR SANDER• Self generating dust extracting, dust-free dual action
sander• Ideal for finishing body filler and working on
contoured surfaces• Single speed control
lever and variablespeed control
• Supplied withhose and dust bag
Specification:Free speed ... 9000r/minAverage air consumption ... 5.0cfm (142L/min)Weight ... 1.4kg
4257
175mm AIR ANGLE SANDER• Ideal for removing rust and filler• Built in speed regulator to ensure a constant control• Incorporates an auto release lever throttle, with left or right fitting handle.
4237A
175mm AIR ANGLE POLISHER• Ideal for heavy buffing and polishing• Complete with built-in regulator to ensure a
constant speed underheavy loads
4276
AIR NIBBLER• Quality diecast construction.• Punch head has four way entry for forward, right, left
and reverse operationSpecification:Cutting capacity ... 18 gauge in steelStrokes per minute ... 2100Average air consumption ... 4.0cfm (114L/min)Weight ... 1kg
4275B
SOFT GRIP AIR BODY SAW• For the body shop and general metal fabrication plants• Cuts through double skins, door sills and chassis with
ease• Supplied with universal swivel joint connector, three
saw blades and two hexagon wrenchesSpecification:Overall length ... 240mmCutting capacity ... 12 gauge mild steel
... 11 gauge aluminium
... 1.2mm steelStroke length ... 10mmStrokes per minute ... 10,000Operating air pressure ... 90psi (6.2bar)Average air consumption ... 8.0cfm (230L/min)Minimum hose size ... 3/8” I.DAir inlet ... 1/4” BSPWeight ... 1kg
4202AK
AIR HAMMER KIT• Contents: air hammer, 5 x chisels and accessories• Short stroke hammer kit comprising a full range of
accessories including panel cutter, rivet cutter, bushsplitter, spot weld splitter and piercing cutter
Specification - air hammer:Chisel shank opening ... 10.18mmBlows per minute ... 3000Stroke length ... 66.6mmAverage air consumption ... 4.0cfm (114L/min)Weight (hammer only) ... 2 kg
W2tools-6 EUR 9/9/11 13:12 Page 114
spray guns
*Typical Selling Price - may vary in-store. 115
Stock No.61429EX. VAT INC VAT
List Price €205.68 List Price €248.87
*TSP €174.00 *TSP €210.54
Stock No.33746EX. VAT INC VAT
List Price €110.64 List Price €133.87
*TSP €99.95 *TSP €120.94
Stock No.10870EX. VAT INC VAT
List Price €176.40 List Price €213.44
*TSP €153.98 *TSP €186.32
Stock No.10869EX. VAT INC VAT
List Price €225.55 List Price €272.92
*TSP €199.98 *TSP €241.98
Stock No.09709EX. VAT INC VAT
List Price €34.25 List Price €41.44
*TSP €25.96 *TSP €31.41
Stock No.09707EX. VAT INC VAT
List Price €40.82 List Price €49.40
*TSP €39.90 *TSP €48.28
Stock No.09708EX. VAT INC VAT
List Price €39.53 List Price €47.83
*TSP €35.40 *TSP €42.83
Stock No.09706EX. VAT INC VAT
List Price €46.10 List Price €55.79
*TSP €45.45 *TSP €54.99
4417
HEAVY DUTY AIR RIVETER• Designed for ease of use and durability this
riveter is ideal for heavy or light productionrequirements
• Quiet operation and speed of use adds value witha cost effective performance
• Suitable for aluminium alloy rivets sizes 2.4, 3.2,4.0, 4.8 and 6.3mm
Specification:Capacity ... 2.4, 3.2, 4.0, 4.8 and 6.3mmTraction power ... 1890kgOperating air pressure ... 60-100psi (4.1-7.0bar)Average air consumption ... 4.0cfm (114L/min)Weight (riveter only) ... 2kg
4296K
AIR RIVETER KIT• Contents: riveting gun, 4 nozzles,
spare jaw set and accessories• Designed for ease of use and
durability this kit satisfies lightproduction needs
• Its quiet operation and speed ofuse adds value with a costeffective performance
• Supplied complete in carryingcase
• Suitable for aluminium alloyrivets only
GSG7-250EX
250ml GRAVITYFEED HVLP AIRSPRAY GUN• Expert Quality• For use with water-based paint• Anti-corrosion aluminium body
with stainless steel and brassgun nozzle and needle
• Multiple hole air cap for correctpaint atomization and fancontrol
Specification:Operating air pressure ... 58psi (4bar)Air consumption ... 7.59cfm (214L/min)Nozzle ... 1mmWeight ... 284g
GSG5-COMP-100
100ml GRAVITYFEED HVLPCOMPOSITE BODYAIR SPRAY GUN• General purpose • For use with all paint types
including water-based• Variable fan and
adjustable flow
Specification:Operating air pressure ... 30psi (2bar)Air consumption ... 8cfm (226L/min)Nozzle ... 1mmWeight ... 180g
GSG5-COMP-600
600ml GRAVITYFEED HVLPCOMPOSITE BODYAIR SPRAY GUN• General purpose • Suitable for use with all paint
types including water-based• Variable fan and
adjustable flow
Specification:Operating air pressure ... 43psi (3bar)Air consumption ... 14.5cfm (400L/min)Nozzle ... 1.4mmWeight ... 375g
GSG5-100
100ml GRAVITYFEED HVLP AIRSPRAY GUN• General purpose • For use with all paint types
including water-based• Variable fan and
adjustable flow
Specification:Operating air pressure ... 30psi (2bar)Air consumption ... 8cfm (226L/min)Nozzle ... 1mmWeight ... 276g
Specification:Capacity ... 2.4, 3.2, 4.0 and 4.8mmTraction power ... 998kgOperating air pressure ... 60-90psi (4.1-6.2bar)Average air consumption ... 4.2cfm (119L/min)Weight (riveter only) ... 1.6kg
GSG7-500EX
500ml GRAVITYFEED HVLP AIRSPRAY GUN• Expert Quality• For use with water-based
paint.• Anti-corrosion aluminium
body with stainless steeland brass gun nozzle andneedle
• Multiple hole air cap forcorrectpaint atomization and fancontrol
Specification:Operating air pressure ... 58psi (4bar)Air consumption ... 12.5cfm
(353L/min)Nozzle ... 1.3mmWeight ... 403g
GSG5-600
600ml GRAVITYFEED HVLP AIRSPRAY GUN• General purpose • For use with all paint type
including water-based• Variable fan and
adjustable flow
Specification:Operating air pressure ... 43psi (3bar)Air consumption ... 14.5cfm (400L/min)Nozzle ... 1.4mmWeight ... 550g
W2tools-6 EUR 9/9/11 13:12 Page 115
116
4212PRO
1L AIR SPRAY GUN• Professional quality• Suction feed complete with pot• Can be used on cellulose,
metallic, synthetics and othersimilar viscosity paints
Stock No.88223EX. VAT INC VAT
List Price €60.60 List Price €73.33
*TSP €57.60 *TSP €69.70
LONG REACH AIR BLOW GUNS• Nylon body with trigger• suitable for cleaning liquid, swarf or
dust during manufacture or assembly• Supplied with safety nozzle
Stock List Price List Price *TSP *TSPNo. Lance Length ex. VAT Inc. VAT ex. VAT Inc. VAT
59326 250mm €9.22 €11.15 €7.99 €9.6759327 325mm €10.94 €13.24 €9.30 €11.2559328 500mm €11.86 €14.35 €10.50 €12.71
4243
AIR CAULKING GUN• Suitable for the automotive workshop• Accepts standard size 215 x 50mm cartridgesSpecification:Bore size ... 50mmTube length ... 215mmOperating air pressure ... 30-60psi (2.1- 4.1bar)Average air consumption ... 6.0cfm (170L/min)Weight ... 1.1kg
Stock No.22301EX. VAT INC VAT
List Price €26.35 List Price €31.89
*TSP €23.70 *TSP €28.68
4244A
AIR UNDERBODY COATING GUN• Fits 1 litre “Schultz” type canistersSpecification:Canister cap thread ... M42 x 3PTube length ... 250mmAverage air consumption ... 8cfm (227L/min)Weight ... 0.6kg
Stock No.55109EX. VAT INC VAT
List Price €22.39 List Price €27.09
*TSP €19.75 *TSP €23.90
4997
400cc HEAVY DUTY AIR GREASEGUN• Continuous flow version suitable for agricultural,
automotive and industrial applications• Accepts bulk or standard 400g grease cartridges• 360° adjustable handle allows access to awkward
locations.• Supplied with rigid delivery tubeSpecification:Operating air pressure ... 30-110psi (2.1-7.6bar)Outlet pressure ... 2400-4500psi (166-414bar)Weight ... 1.5kg
Stock No.71837EX. VAT INC VAT
List Price €46.10 List Price €55.79
*TSP €40.74 *TSP €49.30
4287A
750ml AIR PARAFFIN/WASHING GUN• Suitable for spraying a wide range of oils, cleaning
agents and rustproofing liquids• Fitted with adjustable nozzleSpecification:Operating air pressure ... 40-90psi (2.8-6.2bar)Weight ... 0.5kg
Stock No.43135EX. VAT INC VAT
List Price €15.17 List Price €18.35
*TSP €13.94 *TSP €16.87
4254C
8M RETRACTABLE AIR LINE HOSEREEL• To BS EN ISO 2398 Specifications• Keeps work space free from unwanted lengths of hose• Integral ceiling/wall bracket• Supplied with 9M of air line hose size 8 x 12mm• Hose connection 1/4” BSP male thread• Maximum pressure 1MPa (10bar/145psi).
Stock No.87907EX. VAT INC VAT
List Price €268.42 List Price €324.78
*TSP €156.00 *TSP €188.76
Specification:Suction feed complete with potOperating air pressure ... 50-60psi (3.5-4.1bar)Air consumption ... 7.0-8.5cfm
(199-241L/min)Nozzle ... 1.8mmFluid inlet ... 3/8” BSPWeight ... 1kg
W2tools-6 EUR 9/9/11 13:12 Page 116
*Typical Selling Price - may vary in-store. 117
WHIP HOSES• Manufactured to BS5118 specifications• 600mm (approx.) long• PCL adaptor and male tailpiece
Stock List Price List Price *TSP *TSPNo. Thread Hose I/DxO/D ex. VAT Inc. VAT ex. VAT Inc. VAT
54438 1/4” BSP (M) 7 x 14mm €9.65 €11.67 €8.35 €10.1054439 3/8” BSP (M)10 x 17mm €11.47 €13.88 €9.50 €11.5054440 1/2” BSP (M)13 x 21mm €13.44 €16.26 €10.75 €13.01
AIR TOOL OIL• Gives outstanding performance at high and low temperatures• Contains extreme pressure (EP) additives for ‘shock absorption’• For use with all pneumatic tools and equipmentSpecification:Viscosity at 40° ... 10.0 (ASTM D 445)Specific gravity ... 0.85 (ASTM D 445)Flash point ... >140°C (IP34)
Stock List Price List Price *TSP *TSPNo. Volume ex. VAT Inc. VAT ex. VAT Inc. VAT
34679 250ml €5.88 €7.11 €3.90 €4.7234681 500ml €7.82 €9.47 €5.10 €6.1734682 1L €13.32 €16.12 €8.70 €10.53
PCL air toolfittings...Manufactured by theleading UK air tool fitting
company, the products shown above aremade to the highest standard and willwithstand many years of tough use.
ALG34
HI-FLO AIR LINE INFLATOR WITHSINGLE OPEN ENDED CONNECTOR• Industrial quality manufactured and certified to Directive
86/217/EEC• Pressure range: 0-9.6 bar/0-138psi • Hose length 0.5M (approx.)• Suitable for use on garage forecourts and tyre fitting
bays• A calibration certificate is supplied with each gauge
Stock No.30587EX. VAT INC VAT
List Price €83.16 List Price €100.62
*TSP €68.39 *TSP €82.75
ALG33
HI-FLO AIR LINE INFLATOR WITHTWIN OPEN ENDED CONNECTOR• Industrial quality manufactured and certified to Directive
86/217/EEC• Pressure range: 0-9.6 bar/0-138psi • Hose length: 0.5M (approx.)• Suitable for use on garage forecourts and tyre fitting
bays• A calibration certificate is supplied with each gauge
Stock No.30586EX. VAT INC VAT
List Price €84.43 List Price €102.16
*TSP €69.59 *TSP €84.20
11.5M HEAVY DUTYNYLON RECOIL AIRHOSES• Hoses to BS5409 Specification• Recoil type which allows good
access to working areas• Supplied with spring protection
guards and 360° swivel endfittings
Stock List Price List Price *TSP *TSPNo. Size ex. VAT Inc. VAT ex. VAT Inc. VAT
76981 1/4” BSP male €40.80 €49.37 €23.99 €29.0376982 3/8” BSP male €53.83 €65.14 €31.92 €38.62
ACK2
3 PIECE 1/4” BSP AIR LINE COUPLINGSET• Contents: screw adaptor male thread 1/4” BSP taper,
coupling adaptor female thread 1/4” BSP parallel andscrew adaptor female thread 1/4” BSP taper
Stock No.37844EX. VAT INC VAT
List Price €12.29 List Price €14.87
*TSP €8.30 *TSP €10.04
4255
MINI OILER• To keep air tools lubricated• 1/4” BSP thread• Can be used with most Draper Air tools or other
manufacturers similar products
Stock No.22317EX. VAT INC VAT
List Price €19.90 List Price €24.07
*TSP €10.75 *TSP €13.01
W2tools-6 EUR 9/9/11 13:12 Page 117
118
STRAIGHT LINE AIR HOSES• Generally in accordance with BS EN ISO 2398 Specification• PVC air line hoses for the workshop and industrial user, supplied complete with zinc plated fittings
Stock Part Internal Length Max. Working Diameter List Price List Price TSP* TSP*No. No. Diameter (Working) Connection Pressure internal x external ex.VAT Inc.VAT ex.VAT Inc.VAT
14272 4305 6mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €12.91 €15.62 €9.59 €11.6014273 4310 6mm 10M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €20.42 €24.71 €15.00 €18.1536939 4306 6mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €33.96 €41.09 €23.94 €28.9714274 4320 6mm 20M 1⁄4" BSP Male 1.6MPa (232psi) 6 x 14mm €35.57 €43.04 €28.79 €34.8314275 4305 8mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 8 x 16mm €13.80 €16.70 €10.50 €12.7136940 4307 8mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 8 x 16mm €39.62 €47.95 €26.10 €31.5814276 4305 10mm 5M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €16.80 €20.33 €11.99 €14.5114277 4310 10mm 10M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €26.69 €32.29 €19.98 €24.1836941 4308 10mm 15M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €45.34 €54.86 €29.40 €35.5714278 4320 10mm 20M 1⁄4" BSP Male 1.6MPa (232psi) 10 x 18mm €46.44 €56.19 €35.98 €43.5314279 4305 13mm 5M 1⁄2" BSP Male 1.6MPa (232psi) 13 x 21mm €24.60 €29.77 €18.96 €22.9436942 4309 13mm 15M 1⁄2" BSP Male 1.0MPa (145psi) 13 x 21mm €55.32 €66.94 €31.14 €37.68
straight line
air hoses
twin couplingThis fitting is ideal for running two tools off one air supply.
A6103
PCL TWIN STANDARD COUPLING • Supplied with with two male ‘airflow ‘ couplings and
one ‘Vertex’ tailpiece.
Stock No.25855EX. VAT INC VAT
List Price €40.49 List Price €48.99
*TSP €29.40 *TSP €35.57
Stock No.43394EX. VAT INC VAT
List Price €68.04 List Price €82.33
*TSP €57.00 *TSP €68.97
Stock No.43402EX. VAT INC VAT
List Price €107.11 List Price €129.61
*TSP €94.50 *TSP €114.35
ALFR12
PCL 1/2” BSP COMBINEDFILTER/REGULATOR UNIT• Expert Quality• Designed to eliminate moisture
and particulates from the air flow• Manual/semi-automatic drain with
10 micron filter• Integral locking device• Maximum inlet pressure
14bar/200psi.• Dual marked gauge, bar and psi
ALFRL12
PCL 1/2” BSP COMBINED FILTER/REGULATOR/LUBRICATOR UNIT (FRL)• Expert Quality• Designed to eliminate moisture and
contaminates from the air flowand to lubricate tools priorto use
• Manual/semI-automaticdrain with 10 micron filter
• Integral locking device• Maximum inlet pressure
14bar/200psi.• Dual marked gauge, bar
and psi
W2tools-6 EUR 15/9/11 13:00 Page 118
119
quick reference index
Draper TX-STAR products are compatible with †Torx fixingsystems. †Torx is the registered trademark of Camcar/Textron inc.
AAerosols ................................................................68
Air Tools........................................................108-117
Axle Stands ............................................................50
BBatteries (Dry Cell) ................................................61
Battery Booster Cables..........................................31
Battery Chargers ..............................................28-30
Beam Clamps ........................................................55
Bench Press (Hydraulic)........................................53
Bit Sets ................................................15, 16, 19, 25
Body Repair Kits ....................................................54
Bottle Jacks............................................................50
Brake Repair Tools ..........................................33-34
Breakdown Tools ..................................................31
Brooms ..................................................................77
CCar Seat Covers ....................................................56
Chargers (Battery)............................................28-30
Clutch Tools............................................................35
Coil Spring Compressors ................................65-66
Component Head Storage Rack ..........................40
Compression Testers ............................................39
Compressors (Air) ......................................106-107
Consumables/Assortments ............................68-70
Cooling Tools....................................................35-37
Cross Beam Adaptor ............................................49
DDiagnostic Tools ..............................................37-38
Diesel Service Tools ........................................38-39
Draper TX-STAR products ..............................14-15
Drills ..............................................................86, 102
EEOBD2 Fault Code Reader ....................................38
Electrical Testers ....................................................37
Emergency Tools ..................................................31
Engine Cranes........................................................51
Engine/Gearbox Support ......................................52
Engineers Tools................................................86-87
FFPM Pump Sprayers ............................................35
Feeler Gauges ........................................................43
Fire Extinguishers & Stands..................................92
First Aid Kits ..........................................................92
Flexi Inspection Camera ........................................38
Floor Press (Hydraulic)..........................................53
Fuel Cans................................................................31
GGrease Guns..................................................63, 116
Grinding Discs/Cutting Wheels ..........................102
Gloves ..............................................................69, 91
HHacksaws ..............................................................87
Hammers (all types)..............................................76
Hexagon Keys ........................................................75
Hoists (all types) ..............................................55-56
Hose Clamp Tools..................................................32
Hose Reel ..............................................................77
IImpact Sockets ................................................18-21
Insert Tray System (EVA Foam)..............................9
Inspection Lamps ............................................62-63
JJacks (all types) ..............................................47-50
KKnipex Pliers ..........................................................75
LLamps, Inspection ................................................62
Load Leveller..........................................................52
Load Slings ............................................................54
MMagnifiers ..............................................................95
Micrometers ..........................................................85
Motorcycle Lifts ....................................................46
Motorcycle Tools..............................................45-46
OOil Filter Crusher ....................................................58
Oil Filter Wrenches / Drainage ........................58-60
Oil Funnels..............................................................59
Oil Spill Pallets ......................................................93
Oil Spill Kit..............................................................93
PPPE Products (Safety) ....................................88-91
Padlocks ................................................................95
Pallet Truck ............................................................83
Parts Washer..........................................................57
Pick Up Tools ........................................................44
Piston Ring Compressors ....................................42
Pliers (all types) ........................................34, 71, 72
Power Packs ..........................................................30
Power Tools....................................................96-118
Pressure Washers..................................................99
Protective Clothing ................................................88
Pullers and Separators ....................................64-65
RRiveters ..................................................................73
Roller Cabinets..........................................79, 81, 82
SSack Truck..............................................................83
Safety Footwear ....................................................89
Scrapers ................................................................44
Screwdrivers (all types) ..................71, 73, 74, 110
Separators and Pullers ....................................64-65
Socket Sets ....................................................3-7, 22
Socket Accessories (incl Ratchets, Wobble Bars etc) ..11-13
Sockets (Chromed)................................8-11, 21-22
Soldering/Gas Torches....................................37, 78
Space Heaters ..............................................100-101
Spanners (all types) ........................................23-25
Specialist Sockets (Hub Nut) ..........................20-22
Stud Extractor ........................................................16
Suction Lifters........................................................32
TTap and Dies ..........................................................86
Tape Measures/Rules ............................................77
Thread Repair (Recovery) Tools ..........................43
Tie Down Straps ....................................................70
Tool Kits..................................................................84
Tool Chests ................................................79-82, 84
Torches ..................................................................61
Torque Wrenches ............................................26-27
Tow Ropes ............................................................31
Transmission Jack ................................................52
Transmission Stand ..............................................52
Trolley Jacks ....................................................47-50
Tyre Maintenance Tools ..................................67-68
VValve Grinding Tools..............................................41
Valve Spring Compressors ..................................42
Vice ........................................................................86
WWelding/Cutting Machines ..........................104-105
Welding Accessories ....................................90, 106
Wheel Chocks ........................................................50
Windscreen Tools ..................................................32
Workbench ............................................................78
Wrenches (all types) ..25, 27, 33, 35, 40, 45, 57, 108, 109
W2tools-6 EUR 14/9/11 15:13 Page 119
If no Company name appears above, please visit: www.draper.co.uk/stockistOr telephone +44 (0)23 8049 4333 (note: products cannot be purchased on this number)
E. & O. E. Draper Tools Ltd., Hursley Road, Chandler's Ford, Eastleigh, Hampshire. SO53 1YF U.K.Prices valid until 29th February 2012. These prices may not apply to our internet site.
VAT calculated at 21%, the current rate at time of going to press.
Designed and published by Draper Tools Ltd. Ref: W/SHOP 2 EU 11 Stock No. 70593.
Refer to the Draper Tools website for new products.We are constantly adding new products to our range.
www.draper.co.uk/newproducts
W2tools-6 EUR 9/9/11 13:12 Page 120