Post on 20-Aug-2020
transcript
Summary
Sometimes you want to use you're strap.Some times you don't.Therefore I created the DSLR Strap clamp!Please note I have made the strap clamp originally for the Eos100d/RebelSL1 other straps maybe to wide or to narrow.These files are the non zip files
I made a version for the Canon 550d that one is in the zip file.
Since Brovy_Dobson made it work for his Nikon D5300 we can confirm itworks for that!
Added anti slip mat that you can glue to the bottom of the base plate.I have printed this with ninja flex :-)
A youtube clip showing the clip in action:https://youtu.be/Y9mRKeB4V\_8
Please DONATE if you like my designes!!
Best is to use a tripod screw for attaching it to you're camera.Search on ebay/aliexpress for: "1/4" D-Ring Screw Thread Bolt For CameraTripod"
Gadgets > Photo & Video
Snafky
Canon Strap Clamp100d and 550d +Nikon D5300
VIEW IN BROWSER
updated 29. 1. 2020 | published 29. 1. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
827.7 KBupdated 29. 1. 2020
891.5 KBupdated 29. 1. 2020
1.2 MBupdated 29. 1. 2020
868.8 KBupdated 29. 1. 2020
1.3 MBupdated 29. 1. 2020
1.0 MBupdated 29. 1. 2020
rebel nikond5300 nikon eos550d dslrnikon dslrcanon
dslr d5300 canonrebel canoneos canon cameragrip
550d canon550d
Unassociated tags: canon 550, Canon Strap, Eos 100d, EOS Rebel SL1,Rebel SL1, Strap Clamp, Strap grip Category: Camera
Find source .stl files on Thingiverse.com
lower_body.stl
antislip_mat.stl
upperbody.stl
lower_part_550dnot-tested.stl
upper_part_550dnot-tested.stl
antislip_matt_550dnot-tested.stl
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition