Post on 09-Mar-2015
transcript
Zhone Technologies
Zhone 6742 CPE Firmware Upgrade via GUI
DU Telecom
Version 1.0
Confidential - Copyright Zhone Technologies, Inc. Material contained in this document may not be copied, reproduced, reduced to any electronic medium or machine readable form or otherwise duplicated and the information herein may not be used, disseminated or otherwise disclosed, except with the prior written consent of an authorized representative of Zhone Technologies, Inc.
Zhone and the Zhone logo are registered trademarks, and all Zhone product names are
trademarks of Zhone Technologies, Inc.
This page is left intentionally blank
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 2
Revision History
File Name Date Author Comment
Zhone 6742 CPE Firmware
Upgrade via GUI Rev 1-0.doc June 12, 2011 Zhone Technologies Initial Version
-
.
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 3
1 INTRODUCTION 4
2 CPE FIRMWARE UPGRADE FOR EXISTING DEPLOYED AND IN-SERVICE
CPES IN THE FIELD FROM B3 OR B5 RELEASE TO 102TUP3D0.BIN 4
3 CPE FIRMWARE UPGRADE FOR NEW CPES (NOT YET DEPLOYED NOR
CONFIGURED) IN THE FIELD FROM B3 OR B5 RELEASE TO 102TUP3D0.BIN 11
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 4
1 Introduction
This document provides procedure to upgrade 6742 ADSL2+/VDSL2 CPE via GUI to
software release 102TUP3D0.bin in the following two cases .
a) Upgrade existing deployed and in-service CPEs in the field from b3 or b5 release
to 102TUP3D0.bin.
b) Upgrade new CPEs (not yet deployed nor configured) in the field from b3 or b5
release to 102TUP3D0.bin.
2 CPE Firmware upgrade for existing deployed and in-service CPEs in the field from b3 or b5 release to 102TUP3D0.bin
1. Open Web browser from PC and go to “http://CPE_Management_IP, the
following login page will appear. enter user name: Admin, pwd: Conf
(previously admin/1234)
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 5
2. Check the current software version running on the CPE, go to the “status” menu:
The current software version can be “1.02(TUP.0)b3” or “1.02(TUP.0)b5_0404”
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 6
3. Click on Maintenance > Tools, select “Firmware” menu, specify the directory
where the firmware 102TUP3D0.bin is stored on your PC and then click
“upload” button.
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 7
4. Wait about 2 minutes for the upgrade process and CPE reboot to complete:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 8
5. Once the upgrade process is completed successfully to “102TUP3D0.bin”, check
that the new version is showing on the status page:
6. Update old dial plan with new dial plan, Go to “Voip SIP SIP Service
Provider” and click on “Advanced” button:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 9
Update the old dial plan with the following new dial plan and click “Apply” button”:
([*#]43@|#21@|*21<#:##>@|#67@|*67<#:##>@|#61@|*61<#:##>@|[*#]261@|[*#]40
@|*34*xxxx*[1-3]#@|#34*xxxx#@)
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 10
7. Update old TR069 server IP address with new TR069 IP address, Go to
“Advanced Remote MGMT TR069”:
Replace 172.21.138.10 with 172.21.138.20 and click “Apply/Save” button:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 11
3 CPE Firmware upgrade for new CPEs (not yet deployed nor configured) in the field from b3 or b5 release to 102TUP3D0.bin
1. Open Web browser from PC and go to “http://CPE_Management_IP, the
following login page will appear. enter user name: Admin, pwd: Conf
(previously admin/1234)
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 12
2. Check the current software version running on the CPE, go to the “status” menu:
The current software version can be “1.02(TUP.0)b3” or “1.02(TUP.0)b5_0404”
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 13
3. Click on Maintenance > Tools, select “Firmware” menu, specify the directory
where the firmware 102TUP3D0.bin is stored on your PC and then click
“upload” button.
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 14
4. Wait about 2 minutes for the upgrade process and CPE reboot to complete:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 15
5. Once the upgrade process is completed successfully to “102TUP3D0.bin”, check
that the new version is showing on the status page:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 16
6. Set the CPE to defaults, go to “Maintenance ToolsConfiguration” and click
the “Reset” button:
Zhone 6742 CPE Firmware Upgrade via GUI Rev 1-0.doc 17
The following page will appear, click OK:
CPE will reboot, wait for 2 minutes to come up: