CCEERRTTIIFFIICCAADDOO DDEE PPRROODDUUCCTTOO

RReellééss yy ZZóóccaallooss ddee IInntteerrffaacceess

En conformidad con los requisitos del código eléctrico

de los Estados Unidos (NEC)

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20130924-E339403

Report Reference E339403-20100611

Issue Date 2013-SEPTEMBER-24

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 2

Issued to: ZOLODA S A

HIPOLITO YRIGOYEN 15689

B1852EMM BURZACO ARGENTINA

This is to certify that

representative samples of

MOTOR CONTROLLERS, MAGNETIC - COMPONENT

See Addendum Page for Models

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 60947-4-1A, Low-Voltage Switchgear and Controlgear -

Part 4-1: Contactors and Motor-Starters -

Electromechanical Contactors and Motor-Starters

Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20130924-E339403

Report Reference E339403-20100611

Issue Date 2013-SEPTEMBER-24

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 2 of 2

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.

Relays: Types RZE024AN-2501I12A, RZE024AN-2502I08A, RZE115AN-2501I12A, RZE115AN-2502I08A, RZE230AN-2501I12A, RZE230AN-2502I08A, RZE005CN-2501I12A, RZE005CN-2502I08A, RZE012CN-2501I12A, RZE012CN-2502I08A, RZE024CN-2501I12A, RZE024CN-2502I08A, RZE060CN-2501I12A, RZE060CN-2502I08A, RZE110CN-2501I12A, RZE110CN-2502I08A

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20130924-E339405

Report Reference E339405-20100611

Issue Date 2013-SEPTEMBER-24

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 1

Issued to: ZOLODA S A

HIPOLITO YRIGOYEN 15689

B1852EMM BURZACO ARGENTINA

This is to certify that

representative samples of

SWITCHES, INDUSTRIAL CONTROL - COMPONENT

Industrial applications, open type:

Models RZE012CO-2501I06A, RZE024CO-2501I06A,

RZE060CO-2501I06A

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 508, Industrial Control Equipment

Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20130924-E317487

Report Reference E317487-20071127

Issue Date 2013-SEPTEMBER-24

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 1 of 2

Issued to: ZOLODA S A

HIPOLITO YRIGOYEN 15689

B1852EMM BURZACO ARGENTINA

This is to certify that

representative samples of

RELAY SOCKETS AND ASSEMBLIES - COMPONENT

See Addendum Page for Models

Have been investigated by UL in accordance with the

Standard(s) indicated on this Certificate.

Standard(s) for Safety: UL 508, Industrial Control Equipment

Additional Information: See the UL Online Certifications Directory at

www.ul.com/database for additional information

Only those products bearing the UL Recognized Component Mark should be considered as being covered by UL's Recognition and Follow-Up Service.

The UL Recognized Component Mark generally consists of the manufacturer’s identification and catalog number, model number or other product designation as specified under “Marking” for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL’s Component Recognition Program, UL’s Recognized Component Mark: , may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under “Markings” for the individual recognitions.

Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to UL LLC. Look for the UL Recognized Component Mark on the product.

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number 20130924-E317487

Report Reference E317487-20071127

Issue Date 2013-SEPTEMBER-24

William R. Carney, Director, North American Certification Programs UL LLC Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please contact a local UL Customer Service Representative at www.ul.com/contactus

Page 2 of 2

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements.

Relay sockets and assemblies, Models IZR62-115AC, IZR62-230AC, IZR62-115AL, IZR62-012AL, IZR62-012CL, IZR62-230AL, IZR62-024AL, IZR62-024CL, IZR62-115AV, IZR62-230AV, IZR62-024AV, IZR62-024DV, IZR62-115AX, IZR62-230AX, IZR62-115AY, IZR62-230AY, IZR62-115AZ, IZR62-230AZ, IZT62-115AC, IZT62-230AC, IZT62-115AL, IZT62-012AL, IZT62-012CL, IZT62-230AL, IZT62-024AL, IZT62-024CL, IZT62-115AV, IZT62-012AV, IZT62-012DV, IZT62-230AV, IZT62-024AV, IZT62-024DV, IZT62-115AX, IZT62-230AX, IZT62-115AY, IZT62-230AY, IZT62-115AZ, IZT62-230AZ, IZA15-250AF, IZB15-250AF, IZA15-250AG, IZB15-250AG, IZB15-250AT