Tel: (029) 20 463345 Fax: (029) 20 463346
Email: [email protected]
Web: www.heatcombustion.co.uk
all technical datasheets are available for download from our website
HEAT & COMBUSTION SUPPLIES
CONTROL SYSTEMS CATALOGUE
2015/16 EDITION
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] All information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Welcome New Products for 2015-2016Da
tash
eets
are
ava
ilabl
e to
dow
nloa
d fr
om o
ur w
ebsi
te w
ww.
heat
com
bust
ion.
co.u
k or
by
scan
ning
the
QR c
ode
Dear valued customer,
What a year! Here at Heat &Combustion we have continuedto develop and introduce newand exciting products with wellover 30 being included in thisyears catalogue.
We have also introduced the all new CustomerPortal, which allows Account Holders instant accessto "live" prices and special offers, sign up now andtake advantage.
With fantastic customer feedback we have vastlyimproved our website, thanks to all that helped, havea look at www.heatcombustion.co.uk
Another exciting development has been theintroduction of QR Codes, which will enable you todownload the product data sheet directly to yoursmart phone or tablet.
Try it for yourself, this one will takeyou to the homepage of our website.
Not only are we constantly developing our productsbut we also aim to be the most competitive, which Ihope, when you look at our product range, in mostcases I think you’ll agree we’ve managed to achievethis.
Also you'll see in this catalogue and on our website,metering is becoming a big part of our productrange. We have expanded our supply base in ourefforts to keep our prices as competitive as possiblewithout a compromise on quality, which we are fullyaware is paramount.
I would like to take this opportunity to thank all ofyou for your valued business and I look forward tobuilding on our continued success by delivering ourcontinually expanding quality products withunsurpassed customer service from this family runbusiness.
Kind regards,
Keith MorrisManaging Director
[email protected]: 02920 463345Fax: 02920 463346
NEWPRODUCT
Page 8
Page 14 Page 18
Page 33
Page 33
Page 44
Page 48
Page 48
Page 54
Page 56 Page 57Page 59
Page 65
Page 66 Page 71
Page 74
Page 68
Page 10
Page 61
Page 72Page 72
Page 72
Page 73
Page 75
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
1
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
A-Z Product Index
ACTIVE SENSORS......................................................................8AIR DIFFERENTIAL PRESSURE SWITCHES ......................25, 32AIR FLOW SWITCH..................................................................32AIR PRESSURE TRANSMITTERS ............................................24AIR VELOCITY .........................................................................19ANNUNCIATORS......................................................................34BALANCING VALVES ........................................................57 - 58BALL VALVES.............................................................49 - 50, 51BESPOKE SENSORS................................................................77BLACK BULB SENSORS.............................................................6BUTTERFLY VALVES ................................................................60BUTTON SENSORS....................................................................8CARBON DIOXIDE TRANSMITTER (Co2) .........................47 - 48CARBON MONOXIDE DETECTION (Co) ............................41 - 45CARBON MONOXIDE TRANSMITTER (Co) ..............................45COMMISSIONING TOOL ..........................................................14CURRENT SWITCH..................................................................25CURRENT TRANSFORMERS....................................................76CYLINDER THERMOSTAT ........................................................31DAMPER MOTORS & SPRING RETURN VERSIONS ........63 - 64DEWPOINT SENSOR................................................................18DUCT HUMIDISTAT..................................................................31DUCT TEMPERATURE SENSOR.................................................7DUCT THERMOSTATS..............................................................31ELECTRICITY METERS ............................................................76ELECTRO THERMAL LINK .......................................................21ELECTRONIC FAIL SAFE ACTUATORS .....................49,50,58,65ELECTRONIC THERMOSTATS ...........................................27, 29EMERGENCY STOP BUTTON (VARIOUS) ................................21ENERGY METERS.............................................................72 - 74ENERGY METER CALCULATORS .............................................71FAN COIL VALVES....................................................................52FIREMAN SWITCH.............................................................34, 77FLOAT SWITCH........................................................................33FLYING LEAD TEMPERATURE SENSOR.....................................8FROST THERMOSTAT.......................................................30 - 31GAS DETECTION ..............................................................41 - 45GAS METERS ...................................................................74 - 76GAS SAFE START .............................................................45 - 46GAS SOLENOID VALVES.......................................................2 - 5GAS VALVES (HYDRAULIC) .................................................3 - 4HEAT METERS..................................................................72 - 74HUMIDISTAT DUCT..................................................................31HUMIDITY & TEMPERATURE TRANSMITTER .........................18IMMERSION POCKETS...........................................................6,8IMMERSION TEMPERATURE SENSORS....................................6IMMERSION THERMOSTATS...................................................26INPUT-OUTPUT MODULES ..............................................12 - 17INVERTER DRIVES ..................................................................10ISOLATORS .............................................................................22LEVEL SWITCH ................................................................32 - 33
LIFT & LAY VALVES ......................................................53,54,59LIQUID DP SWITCH.................................................................39LIQUID PRESSURE TRANSMITTER.........................................23MICROWAVE SENSORS ..........................................................20MUTLI - FUNCTION TIMER......................................................33OCCUPANCY SENSOR .............................................................20OIL LEVEL SWITCH .................................................................33OIL METERS............................................................................76OUTSIDE TEMPERATURE SENSOR ...........................................7PANEL LAMPS.........................................................................22PIPE THERMOSTAT .................................................................31PLANT EXTENSION TIMER......................................................33PRESSURE INDEPENDENT VALVES .................................57 - 58PRESSURE SWITCH (AIR) ................................................25, 32PRESSURE SWITCH (GAS) .....................................................32PRESSURE SWITCH (LIQUID).................................................32PRESSURE TRANSMITTERS............................................23 - 24PROPORTIONAL CONTROLLERS......................................28, 30RAIN SENSOR .........................................................................18RADIATOR VALVE HEAD.....................................................31,57RELAYS ...................................................................................11REMOTE ALARM PANEL..........................................................34RESISTANCE CHART .................................................................9ROOM TEMPERATURE SENSOR ...............................................6ROOM THERMOSTATS ............................................................31SELECTOR SWITCHES ............................................................22ROTARY SHOE VALVES....................................................60 - 61SETPOINTS..............................................................................77SMOKE DETECTOR..................................................................35SOLENOID VALVE (GENERAL PURPOSE)..................................5SOLENOID VALVE (WRAS) ........................................................5SPRING RETURN BALL VALVES ......................................49 - 50SPRING RETURN DAMPER ACTUATORS ................................64STRAP-ON TEMPERATURE SENSOR.........................................7SWITCHPLATES.......................................................................77TEMPERATURE & HUMIDITY TRANSMITTER .........................18TIMERS ...................................................................................33THIMBLE SENSORS ..................................................................8TRANSFORMERS .............................................................15 - 16THYRISTORS ...................................................................36 - 38TIME SWITCHES......................................................................35ULTRASONIC HEAT METERS............................................72 - 74VELOCITY SENSOR .................................................................19WATER FLOW SWITCH............................................................32WATER LEAK DETECTION........................................................18WATER METERS ..............................................................66 - 70WATER PRESSURE SWITCH ...................................................32WATER PRESSURE TRANSMITTERS ......................................23WEATHER PROOF COVER .......................................................62WIND SPEED SENSORS ..........................................................34ZONE VALVES...................................................................50 - 51
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:16 Page 1
2
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Gas ValvesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
ELEKTROGAS VMR AUTO RESET 230V ACOther voltages available on request The VMR type valve is a fast opening single-stage solenoid valve, normally closed (open whenenergised). This type of device is suitable for air or gas blocking and releasing controls, In gas powerburners, atmospheric gas boilers, industrial kilns and others gas consuming appliances.
Features• The valves are made of aluminium alloy die-cast (or hot-pressed brass for OTN versions), with a widerange for inlet/outlet connections from DN8 up to DN150
• Suitable for use with air and non-aggressive gases included in the 1, 2 and 3 families (EN 437) and Pipeconnections meet group 2 and back pressure sealing is compliant to Class A EN161 approval
• This valve is open only when energised: if, for any reason, power supply goes down, the valve closesimmediately
• Qualified for continuous service (100% ED)• An incorporated fine mesh filter protects the valve seat and disc as well as downstream componentsand prevents dirty contamination (except brass models)
• Provided with G1/4 pressure tappings on two sides in the inlet chamber (except brass models)• Flanged models are provided with tappings in the outlet chamber too. Other tapping points on request• Provided with G1/8 connection on the bottom for closed position indicator micro switch from DN65 toDN150 (on request from 3/4" to 2").
*NOTE: FOR 4”, 5” & 6” FLANGED VALVES, AFTER DE-ENERGISING THE VALVES, YOU MUST WAIT AT LEAST 5 SECONDSBEFORE SWITCHING IT BACK ON AGAIN. THIS IS TO ALLOW THE CAPACITOR ENOUGH TIME TO RE-CHARGE.
Part Number Size
VMR12 1⁄2’’
VMR22 3⁄4”
VMR32 1’’
VMR352 11⁄4”
VMR42 11⁄2”
VMR62 2”
VMR72 21⁄2” FLANGED
VMR82 3” FLANGED
*VMR92 4” FLANGED
*VMR932 5” FLANGED
*VMR952 6” FLANGED
Maximum pressure 200MBARProtection Class - IP54 (IP65 option available - contact Heat & Combustion for costs)
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:16 Page 2
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
3
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Valves
VMH ELECTRO HYDRAULIC 230V GAS VALVE FROMSIZES 65MM (21⁄2”) - DN200 (8”) FLANGED BODYPN16Protection Class - IP65 as standard
VMH Safety shut off valve for gas c/w Hydraulic Actuator.Fitted as standard with PCS CPI Switch.
Features• The new range of VMH Electro hydraulic Gas Valves are madeof aluminium alloy with connections from DN65-DN200. Pipeconnections meet Group 2 and back pressure sealing incompliant with Class A, according to EN161 requirements.Suitable for use with air and non aggresive gases included inthe 1, 2 and 3 families (EN437). The valve is open only whenenergised, if for any reason the power supply goes down thevalve closes immediately. Qualified for continuous Service(100%ED) - Sizes DN65-DN80 are equipped with flow rateadjustment. An incorporated fine mesh filter protect the valveseat and disc as well as downstream components andprevents dirty contamination provided with 1⁄4” pressuretappings on two sides in both inlet and outlet chamber toconnect pressure switches, manometers, leakage tester orother gas equipment. CPI Proof of Closure Switch fitted asstandard.
• The Actuator is provided with ISO 4400plug for easy cabling. The protection isIP65 (EN 60529).
Part Number Size Pressure Range
VMH7 21⁄2” FLANGED 0 - 1600 MBAR
VMH8 3” FLANGED 0 - 1600 MBAR
VMH9 4’’ FLANGED 0 - 1300 MBAR
VMH93 5” FLANGED 0 - 500 MBAR
VMH95 6” FLANGED 0 - 500 MBAR
VMH98 8” FLANGED 0 - 200 MBAR
Part Number Size
EVRM-NC - 1⁄2’’ 1⁄2’’
EVRM-NC - 3⁄4” 3⁄4”
EVRM-NC - 1’ 1’’
EVRM-NC - 11⁄4” 11⁄4”
EVRM-NC - 11⁄2” 11⁄2”
EVRM-NC - 2” 2”
EVRM-NC - 21⁄2” 21⁄2” FLANGED
EVRM-NC - 3” 3” FLANGED
EVRM-NC - 4” 4” FLANGED
EVRM-NC - 5” 5” FLANGED
EVRM-NC - 6” 6” FLANGED
EVRM-NC - 8” 8” FLANGED
EVRM-NC - 10” 10” FLANGED
EVRM-NC - 12” 12” FLANGED
ELEKTROGAS EVRM - NC MANUAL RESET 230V ACOther voltages available on request The EVRM-NC type valve is a manual reset safety valve that isnormally closed (open when energised). This type of device,connected to one or more gas leakage detectors, safetythermostat or alarm signals for the presence of carbon monoxide,is suitable to perform locking operations on the gas line.
Features• The valves are made of aluminium alloy die-cast (or hot-pressed brass for OT versions), with a wide range forconnections from DN10 up to DN300
• Suitable for use with air and non-aggressive gases included inthe 1, 2 and 3 families (EN 437)
• This valve is open only when energised: if, for any reason,power supply goes down, the valve closes immediately
• An incorporated fine mesh filter protects the valve seat anddisc as well as downstream components and prevents dirtycontamination (except brass models)
• Provided with G1/4 pressure tappings on two sides in the inletchamber (except brass models)
• Flanged models are provided with tappings in the outletchamber too. Other tapping points on request
• Provided with G1/8 connection on the bottomfor closed position indicator micro switch fromDN65 to DN300 (on request from 3⁄4" to 2")
• Pipe connections meet group 2, according toEN161 requirements.
Protection Class - IP65 (1⁄2”-3”)IP54 (4”-12”)Maximum pressure 600MBARNEW 10” & 12” Versions available
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:16 Page 3
4
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] All information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Gas ValvesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
CLOSED POSITION INDICATOR FOR VMR / EVRMGAS VALVES
The PCS Closed Position Indicator switchis a mechanically activated micro-switchfor monitoring the position of the gasvalve. The safety device can be fitted tothe VMR & EVRM gas valve.• Each switch is supplied with anadapting rod already fitted to makeinstallation easier.
Caution: The solenoid valves must beprovided with a G1⁄8" threaded hole on the
bottom, to allow the switch assembly Microswitch installation.1) Interupt gas supply.2) Remove the 1⁄8" plug from valve bottom.3) Introduce the adapting rod inside 1⁄8" hole and screw the
micro switch.Electrical Connections (IEC 730-1)1) Turn off power supply.2) Unscrew the Din plug and connect cables to
terminals 1, 2, 33) Screw back the Din plug using the gasket
properly.
Part Number Valve sizePCS 3 3⁄4” - 1”
PCS 4 11⁄4” - 11⁄2’’
PCS 6 2’’
PCS 8 21⁄2” - 3”
PCS 9 4”
PCS 95 5” - 6”
PCS 98 8” (manual version only)
PCS 910 10” (manual version only)
PCS 912 12” (manual version only)
SPARE COILS
Part Number
VMR 1⁄2” COIL
VMR 3⁄4”, 1” COIL
VMR 11⁄4”, 11⁄2”, 2” COIL
VMR 21⁄2”, 3” COIL
VMR 4” COIL
VMR 5”, 6” COIL
EVRM 1⁄2” - 2” COIL
EVRM 21⁄2” - 3” COIL
EVRM 4” - 12” COIL
10” KROMSCHRODER C/W CPI SWITCH For safeguarding, controlling and regulating the gas and airflow to burners and devices, including two-step operation. TheVKG with GGG 40 housing complies with the requirements ofTRD 412, Paragraph 4.2 (Use in Open-Air Installations),Paragraph 5.1 (Shut-Off Device Outside the Boiler Room) andGUV 17.4 (Use in Landfill Installations). The VK.X version isrecommended for hazardous areas zone 1 and 2, e.g. in paintfactories, paint shops, refineries, chemical plants, sewagetreatment plants, waste dumps (landfill sites) and gas / oildelivery lines etc.
Features• Automatic shut-off valve class A EN 161• Robust construction, long service life• Economical through automatic motor shut-off• Available as one or two-step version with position indicator• Available with GGG 40 valve housing• Available with explosion-proof valve upper section• EC type tested and certified.FunctionMotorised valve VK is an hydraulically actuated safety valve,normally (when de energised) closed.When the mains voltage is applied, the internal pump builds upan oil pressure. This pressure slowly forces the valve discdownwards by means of a piston. The pump switches off whenthe valve is fully open. As soon as the pressuredrops,repumping occurs briefly. When closing, the voltagemust be disconnected, the oil pressure is then relieved and theclosing spring forces the valve disc to close within 1 second.Fitted with End Switch as standard.
Part Number Size
VK250E 10” (250mm) 240V
SPARES FOR VMR / EVRM VALVES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:16 Page 4
5
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Valves General Purpose and WRAS Approved Solenoid Valves
PILOT GAS VALVES VMR-OTN SERIESThe VMR-OTN type valve is a fast opening single-stagesolenoid valve, normally closed (open when energised). Thistype of device is suitable for air or gas blocking and releasingcontrols, required in gas power burners, atmospheric gasboilers. industrial kilns and others gas consuming appliances.
Features• The valves are made of brass.• Suitable for use with air and non-aggressive gases included inthe 1, 2 and 3 families
• This valve is open only when energised: if, for any reasonpower supply goes down, the valve closes immediately
• Qualified for continuous service (100% ED)• Pipe connections meet group 2 and back pressure sealing iscompliant with class A, according to EN161 requirements
• Valves are 100% tested by computerised testing machinesand are fully warranted
PartNumber
PipeSize Orifice Min
PressMaxPress
VMR010TN 1⁄4” 1⁄4” 0 200 MBar
VMR120TN 1⁄2” 1⁄2” 0 200 MBar
GENERAL PURPOSE SOLENOID VALVESA range of general purpose 2 / 2 normally closed solenoidvalves direct acting 1⁄2” to 2” 240/50hz as Standard. 24VAC alsoavailable from stock.(Other voltages & sizes available on request. As well asvalves for steam). Please contact the office for further details.
Features• Body material Brass• Useage: Air / Gas / Water / Light oil (35 sec oil)• Temperature range: -5˚C to +120˚C• Protection: IP65• Mounting Position: Preferred with vertical coilabove
• 1/2” - 2” BSP Pipesize - Direct Acting 0-7BARPressure range.
Part Number
ZS15 1⁄2” (240V or 24VAC)
ZS20 3⁄4” (240V or 24VAC)
ZS25 1” (240V or 24VAC)
ZS35 11⁄4” (240V or 24VAC)
ZS40 11⁄2” (240V or 24VAC)
ZS50 2” (240V or 24VAC)
Spare Coils (240V / 110V / 24VAC)
ZS15 - 25
ZS35 - 50
DANFOSS WRAS WATER COUNCIL APPROVEDWATER SOLENOID VALVESPilot operated normally closed solenoid valves, 11⁄4”-2” typeEVSI 32-50 230VAC as standard other voltage available.
Part Number
EVSI 11⁄4” 0.3 - 16 BAR
EVSI 11⁄2” 0.3 - 16 BAR
EVSI 2” 0.3 - 16 BAR
WRAS WATER COUNCIL APPROVED WATERSOLENOID VALVESPilot operated normally closed solenoid valves, 1⁄2” - 1” typeL182D. Brass body EPDM seals. 230VAC as standard othervoltages available on request.
Part Number
L182DO1 1⁄2” 0.35 - 16 BAR
L182DO1 3⁄4” 0.35 - 12 BAR
L182DO1 1” 0.35 - 12 BAR
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] All information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:16 Page 5
6
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Temperature SensorsDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Part Number Compatibility
TR1 TREND / HONEYWELL / THORN / NEWCYLON SYSTEMS 10K3A1
SR SATCHWELL DRT 10K3A1/A
CR CYLON PT 1000
AR ANDOVER / YORK UP TO 40˚C 10K4A1
ALR ALLERTON 3K3A1
DR DRAYTON 30K6A1
TAC-R TAC 1K87A1
HR HONEYWELL 20K6A1
TE-RN1K SIEMENS N1 1000
TR1AVERAGING (2 X 10K3A1 BEADS)
Part Number Compatibility
TR1/SP ROOM SENSOR WITH SETPOINT ADJ10K3A1
PROTECTION: IP 20TYPE: NTC THERMISTORHOUSING: MATERIAL ABSDIMENSIONS: 84mm(H) x 84mm (W) x 24mm (D)ACCURACY: +0.2 DEG C
Part Number Compatibility
TI TREND / HONEYWELL / THORN / NEWCYLON SYSTEMS 10K3A1
SI SATCHWELL 10K3A1/A
CI CYLON PT 1000
AI ANDOVER / YORK UP TO 40˚C 10K4A1
ALI ALLERTON 3K3A1
DI DRAYTON 30K6A1
TAC-I TAC 1K87A1
HI HONEYWELL 20K6A1
TE-IN1K SIEMENS N1 1000
PROTECTION: IP 65TYPE: NTC THERMISTORHOUSING MATERIAL: ABSHOUSING DIMENSIONS: 80mm x 50mmPROBE: BrassDIMENSIONS: 150mm x 6mmACCURACY: +0.2 DEG C
BLACK BULB TEMPERATURE SENSORSTrend compatible 10K3A1 (for Radiant heaters). Other BMSversions available on request.
ON ALL BMS SENSORS, CUSTOMERS LABELS AVAILABLE ON REQUEST, CONTACT HEAT & COMBUSTION FOR DETAILS
TREND COMPATIBLE IMMERSION SENSORS WITH65MM PROBE
ON ALL BMS SENSORS, CUSTOMERS LABELS AVAILABLE ON REQUEST, CONTACT HEAT & COMBUSTION FOR DETAILS
Part Number Compatibility
HC-TE-IT-65 10K3A1 TREND 10K3A1
BP65 BRASS POCKET 65MM
IMMERSION TEMPERATURE SENSORA direct output temperature sensor used for measuring liquidtemperature in pipes. Compatible with the below listedmanufacturers.
ROOM / SPACE TEMPERATURE SENSORA direct output temperature sensor used for measuring airtemperature in indoor spaces. Compatible with the below listedmanufacturers equipment.
Part Number Compatibility
HC-TE-RBN-T TREND 10K3A1
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 6
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
7
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Temperature Sensors
Part Number Compatibility
TD TREND / HONEYWELL / THORN / NEWCYLON SYSTEMS 10K3A1
SD SATCHWELL 10K3A1/A
CD CYLON PT 1000
AD ANDOVER / YORK UP TO 40˚C 10K4A1
ALD ALLERTON 3K3A1
TAC-D TAC 1K87A1
HD HONEYWELL 20K6A1
TE-DN1K SIEMENS N1 1000
DUCT TEMPERATURE SENSORA direct output temperature sensor used for measuring airtemperature in ducts. Units compatible with the below listedmanufacturers equipment.
PROTECTION: IP 65TYPE: NTC THERMISTORHOUSING MATERIAL: ABSHOUSING DIMENSIONS: 80mm x 50mmPROBE: BrassDIMENSIONS: 150mm x 6mmACCURACY: +0.2 DEG C
OUTSIDE TEMPERATURE SENSORA temperature sensor used for measuring outside airtemperature. Compatible with the below listed manufacturersequipment.
Part Number Compatibility
TO TREND / HONEYWELL / THORN / NEWCYLON SYSTEMS 10K3A1
SO SATCHWELL 10K3A1/A
CO CYLON PT 1000
AO ANDOVER / YORK UP TO 40˚C 10K4A1
ALO ALLERTON 3K3A1
DO DRAYTON 30K6A1
TAC-O TAC 1K87A1
HO HONEYWELL 20K6A1
TE-ON1K SIEMENS N1 1000
PROTECTION: IP 65TYPE: NTC THERMISTORHOUSING MATERIAL: ABSHOUSING DIMENSIONS: 80mm x 50mmACCURACY: +0.2 DEG C
STRAP-ON TEMPERATURE SENSORA direct output temperature sensor used for measuring pipetemperature. Compatible with the below listed manufacturersequipment.
Part Number Compatibility
TS TREND / HONEYWELL / THORN / NEWCYLON SYSTEMS 10K3A1
SS SATCHWELL 10K3A1/A
CS CYLON PT 1000
AS ANDOVER / YORK UP TO 40˚C 10K4A1
ALS ALLERTON 3K3A1
DS DRAYTON 30K6A1
TAC-S TAC 1K87A1
HS HONEYWELL 20K6A1
TE-SN1K SIEMENS N1 1000
PROTECTION: IP 65TYPE: NTC THERMISTORHOUSING MATERIAL: ABSHOUSING DIMENSIONS: 80mm x 50mm (Includes strap for up to
6” pipe diameter)ACCURACY: +0.2 DEG C
ON ALL BMS SENSORS, CUSTOMERS LABELS AVAILABLEON REQUEST, CONTACT HEAT & COMBUSTION FOR
DETAILS
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 7
8
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Temperature Sensors Active Sensor and Immersion Sensor Pockets
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
FLYING LEAD TEMPERATURE SENSOR IP68WATERPROOF VERSIONS10K Trend as standard otherBMS versions availableon request.
NEW ACTIVE SENSORSThe HC-TE range are 4-20MA
or 0-10V output. Activesensors: available in Room,Duct, Immersion, Outside and Strap-on versions.
Part Number Description
HC-TE-ITI IMMERSION 4-20MAHC-TE-ITI-65 65MM IMMERSION 4-20MAHC-TE-DTI DUCT 4-20MAHC-TE-OTI OUTSIDE 4-20MAHC-TE-STI STRAP ON 4-20MAHC-TE-RTI ROOM 4-20MAHC-TE-ITV IMMERSION 0-10VDCHC-TE-ITV-65 65MM IMMERSION 0-10VDCHC-TE-DTV DUCT 0-10VDCHC-TE-OTV OUTSIDE 0-10VDCHC-TE-STV STRAP ON 0-10VDCPocketsBP65MM BRASS POCKET 65MMBRASS POCKET POCKET 150MM
FLYING LEAD TEMPERATURE SENSORA low cost direct output temperature sensor used formeasuring air temperature, i.e. in fan-coil units etc. Unitscompatible with the below listed manufacturers equipment.
Features• Low Profile Cap• Complete With Cable• Large Range of Sensor Options• Flame Retardant Acetyl Resin
Part Number Compatibility
TFTREND / HONEYWELL / THORN / NEWCYLON SYSTEMS STANDARD 2MVERSION 10K3A1
TF 5M TREND 5M VERSION 10K3A1
SF SATCHWELL 10K3A1/A
CF CYLON PT 1000
AF ANDOVER / YORK UP TO 40˚C 10K4A1
ALF ALLERTON 3K3A1
TE-FN1K SIEMENS N1 1000
Part Number Description
HC-TE-W2 2 METRE 10K VERSION
HC-TE-W5 5 METRE 10K VERSION
TEMPERATURE RANGE: -20 DEG C TO +110 DEG CPRESSURE: 10 BARDIMENSIONS: 150mm x 8mm x 1⁄2” BSP
Part Number
BRASS POCKET
STAINLESS STEEL POCKET
A RANGE OF THIMBLE AND BUTTON SENSORS FORTREND AND ALL OTHER BMS SYSTEMS CONTACT
HEAT & COMBUSTION FOR DETAILS / PRICES - QUANTITY RATES ETC
IMMERSION SENSOR POCKETSPockets are available in both brass and 316 stainless steel.Brass pockets are recommended for use with standard LPHWand DHWS systems whilst stainless steel variants can be usedon high temperature and pressure installations (includingsteam) and are also recommended for chilled water and otherlow temperature applications.Features• 1⁄2” BSP Thread For Direct Installation• Brass and Stainless Steel Variants
NEWPRODUCT
REDUCEDPRICE
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 8
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
9
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BMS Temperature Resistance Chart
3K3A1 10K3A1 10K3A1/A 10K-4A1 20K6A1 30K6A1 100K6A1 PT100 PT1000 TAC1 LST1 LS1000 SN1000
Temp°c
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
ResΩ
-30 53005 176683 9465 135233 415479 622944 2077394 88.22 882 23800 1934 871.6 842-20 29092 96974 9067 78930 221297 331876 1106485 92.16 922 13700 2030 913.5 893-15 21868 72895 8796 61030 163875 245785 819378 94.12 941 10500 2078 934.7 919-10 16589 55298 8472 47549 122473 183697 612366 96.09 961 8220 2127 956.2 946-5 12694 42314 8093 37316 92336 138502 461683 98.04 980 6450 2176 977.9 9730 9795 32650 7661 29490 70203 105305 351017 100 1000 5120 2226 1000.0 10001 9309 31030 7569 28157 66524 99787 332619 100.39 1004 2236 1004.4 10062 8850 29500 7475 26891 63058 94568 315258 100.78 1008 2246 1008.8 10113 8416 28054 7379 25689 59792 89689 298959 101.17 1012 2256 1013.3 10174 8006 26688 7281 24547 56713 85069 283558 101.56 1015 2266 1017.8 10225 7619 25396 7182 23462 53809 80713 269041 101.95 1019 4090 2276 1022.2 10286 7252 24173 7082 22430 51068 76604 255337 102.34 1024 2286 1026.7 10337 6905 23016 6980 21450 48483 72726 242414 102.73 1027 2296 1031.2 10398 6577 21921 6877 20517 46043 69064 230210 103.12 1031 2306 1035.7 10449 6266 20885 6772 19631 43739 65608 218668 103.51 1035 2316 1040.2 105010 5971 19904 6667 18787 41562 62347 207807 103.90 1039 3290 2326 1044.7 105611 5692 18974 6560 17983 39505 59257 197521 104.29 1043 2337 1049.3 106112 5428 18092 6453 17219 37561 56346 187803 104.68 1047 2347 1053.8 106713 5177 17257 6345 16490 35723 53585 178613 105.07 1051 2357 1058.4 107214 4940 16465 6236 15797 33985 50978 169924 105.46 1055 2387 1063.0 107815 4714 15714 6126 15136 32341 48511 161702 105.85 1058 2670 2377 1067.6 108416 4500 15001 6016 14507 30785 46178 153923 106.24 1062 2560 2368 1072.1 109017 4297 14325 5906 13906 29312 43969 146560 106.63 1066 2460 2398 1076.7 109518 4105 13623 5795 13334 27918 41877 139568 107.02 1070 2360 2408 1081.3 110119 3916 13053 5681 12788 26597 39895 132984 107.40 1074 2270 2418 1086.0 110720 3748 12494 5573 12268 26346 38019 126729 107.79 1078 2180 2429 1090.6 111221 3583 11943 5369 11771 24160 36240 120799 108.18 1082 2100 2439 1095.3 111822 3426 11420 5353 11297 23035 34554 115179 108.57 1086 2020 2449 1099.9 112423 3277 10923 5243 10845 21970 32955 109850 108.96 1090 1940 2460 1104.6 113024 3135 10450 5134 10413 20959 31438 104796 109.35 1094 1870 2470 1109.3 113625 3000 10000 5025 10000 20000 30000 100000 109.73 1098 1800 2480 1113.9 114126 2871 9572 4917 9606 19089 28635 95449 110.12 1101 2491 1119.6 114727 2749 9165 4809 9229 18225 27339 91128 110.51 1105 2501 1123.4 115328 2633 8777 4703 6869 17405 26108 87026 110.90 1110 2512 1128.1 115929 2522 8408 4597 8525 16625 24939 83129 111.28 1113 2522 1132.8 116530 2417 8056 4492 8197 15685 23828 79428 111.67 1117 1490 2532 1137.6 117135 1959 6530 3987 6754 12697 19046 63489 113.61 1136 2585 1161.5 120040 1598 5325 3518 5594 10211 15317 51058 115.54 1155 1040 2638 1185.7 123045 1310 4367 3089 4656 8259 12390 41301 117.47 1175 2692 1210.2 126050 1080 3601 2702 3893 6719 10079 33598 119.40 1194 740 2745 1234.9 129155 895.5 2985 2358 3271 5495 8243 27479 121.32 1213 2800 1260.0 132280 746.2 2487 2056 2760 4518 6777 22593 123.24 1232 540 2855 1285.4 1353155 624.7 2082 1792 2339 3733 5600 18669 125.16 1251 2910 1311.1 138570 525.5 1751 1563 1990 3100 4650 15502 127.07 1271 400 2966 1337.1 141780 376.9 1256 1193 1458 2167 3251 10837 130.89 1309 300 3079 1390.1 148390 274.8 916.0 921 1084 1542 2313 7710 134.70 1347 230 3194 1444.4 1549100 203.6 678.6 722 817.2 1115 1672 5574 138.50 1385 180 3311 1500.0 1618110 153.0 510.1 575 624.1 818.9 1228 4092 142.29 1423 3430 1556.9 1688120 116.6 388.6 466 482.5 609.9 914 3047 146.06 1461 3552 1615.3 1760130 89.95 300.0 386 377.2 460.4 690 2299 149.82 1498 3675 1675.1 1833140 70.23 234.1 324 298.1 351.8 527 1756 153.58 1536 3801 1736.4 1909150 55.44 184.8 278 238.0 272.0 407 1357 157.31 1573 3929 1799.2 1987160 161.04 1610170 164.76 1648180 168.46 1685190 172.16 1722200 175.84 1758250 194.07 1941300 212.02 2120350 229.67 2297400 247.04 2470
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 9
10
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eFuji HVAC Drives / Schneider ATV 212 HVAC IP55 Drive
SCHNEIDER ATV 212 HVAC IP55 DRIVE The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions andcommunication protocols integrated as standard: Modbus, METASYS N2®, APOGEE FLN P1® and BACnet®. With protocols offered as standard and the LONWORKS® communication card offered as an option, the Altivar 212 isoptimised for the HVAC “Heating, Ventilation and Air Conditioning market”.It has been designed for the most common fluid managementapplications (HVAC):• Ventilation• Heating and air conditioning• PumpingIts design is based on eco-energy with a reduction in energyconsumption of up to 70% compared to a conventional control system.It is eco-friendly and complies with directives such as RoHS, WEEE, etc.
Note: IP21 versions available on request
IP21 VERSION - PANEL MOUNTED
Part Number KW Rating
FRNO.75AR1M-4E 0.75kw
FRN1.5AR1M-4E 1.5kw
FRN2.2AR1M-4E 2.2kw
FRN4.0AR1M-4E 4.0kw
FRN5.5AR1M-4E 5.5kw
FRN7.5AR1M-4E 7.5kw
FRN11AR1M-4E 11kw
FRN15AR1M-4E 15kw
FRN18.5AR1M-4E 18.5kw
FRN22AR1M-4E 22kw
FRN30AR1M-4E 30kw
FRN37AR1M-4E 37kw
FRN45AR1M-4E 45kw
FRN55AR1M-4E 55kw
FRN75AR1M-4E 75kw
FRN90AR1M-4E 90kw
IP55 VERSION - WALL MOUNTED
Part Number KW Rating
FRNO.75AR1L-4E 0.75kw
FRN1.5AR1L-4E 1.5kw
FRN2.2AR1L-4E 2.2kw
FRN4.0AR1L-4E 4.0kw
FRN5.5AR1L-4E 5.5kw
FRN7.5AR1L-4E 7.5kw
FRN11AR1L-4E 11kw
FRN15AR1L-4E 15kw
FRN18.5AR1L-4E 18.5kw
FRN22AR1L-4E 22kw
FRN30AR1L-4E 30kw
FRN37AR1L-4E 37kw
FRN45AR1L-4E 45kw
FRN55AR1L-4E 55kw
FRN75AR1L-4E 75kw
FRN90AR1L-4E 90kw
Part Number KW RatingATV212 0.75 0.75kw
ATV212 1.5 1.5kw
ATV212 2.2 2.2kw
ATV212 3.0 3.0kw
ATV212 4.0 4.0kw
ATV212 5.5 5.5kw
ATV212 7.5 7.5kw
ATV212 11 11kw
ATV212 15 15kw
ATV212 18.5 18.5kw
ATV212 22 22kw
ATV212 30 30kw
ATV212 37 37kw
ATV212 45 45kw
ATV212 55 55kw
ATV212 75 75kw
HIGHER KW RATING DRIVES AVAILABLE ON REQUEST
NEWPRODUCT
FUJI FRENIC RANGE OF HVAC IP55 & IP21 DRIVES (IP21 VERSION ALSO SUITABLE FOR WALLMOUNT/STAND ALONE IN A DRY/CLEAN ENVIRONMENT)The new range of Fuji Frenic HVAC Drives available in both IP21 (panel wall mounted) and IP55 (wall mounted). Suitablefor all BMS management systems. (HVAC functionality). Harmonic DCR, RTC with customisable HMI keypad.Customised, logic digital and analogue. Slim body design.Frenic HVAC complies to level 3C2 according to IEC 60721-3-3Features• 5 year warranty• Filter clogging prevention facility• Built in filter and chokes• Easy readable display• For all HVAC/ventilation/pumping/heatingand air conditioning applications
• Modbus RTURS485& Bacnet asstandard
• 6 outputs asstandard, bothAnalogue outputseither 0-10V or4-20MA.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 10
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
11
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BMS Relays
RM1 (RM87) SERIES SPCO RELAY C/W BASEPart Number Voltage*RM1 - OOOT-12DS-S 12VDC
RM1 - OOOT-24A 24VAC
RM1 - OOOT-24D 24VDC
RM1 - OOOT-230A 230VAC
RM2 (RM84) SERIES DPCO RELAY C/W BASE
Part Number Voltage
RM2 - OOOT-12DC 12VDC
RM2 - OOOT-24A 24VAC
RM2 - OOOT-24D 24VDC
RM2 - OOOT-230A 230VAC
R2 2PCO RELAY C/W BASE (RELPOL)L.E.D. mechanical indicator & lockable front test button asstandard.
Part Number Voltage
R2N-2012-23-1012 12VDC c/w GZT2 BASE 12VDC
R2N-2012-23-5024 24VAC c/w GZT2 BASE 24VAC
R2N-2012-23-1024 24VDC c/w GZT2 BASE 24VDC
R2N-2012-23-5230 230VAC c/w GZT2 BASE 230VAC
OPTIONAL EXTRAS FOR RM1 (RM87) & RM2(RM84)
Part Number Size
M61G GREEN LED 6-24VAC/DC
M63G GREEN LED 110V-240VAC
ZG-GZ808 WAY CONNECTOR BAR(BLACK OR GREY AVAILABLE) FOR EASE OF WIRING
R3 3PCO RELAY C/W BASE (RELPOL)L.E.D. mechanical indicator & lockable front test button asstandard.
Part Number Voltage
R3N-2012-23-1012 c/w GZT3 BASE 12VDC
R3N-2013-23-5024 c/w GZT3 BASE 24VAC
R3N-2013-23-1024 c/w GZT3 BASE 24VDC
R3N-2013-23-5230 c/w GZT3 BASE 230VAC
R4 4PCO RELAY C/W BASE (RELPOL)L.E.D. mechanical indicator & lockable front test button asstandard.
Part Number VoltageR4N-2014-23-1012 c/w GZT4 BASE 12VDC
R4N-2014-23-5024 c/w GZT4 BASE 24VAC
R4N-2014-23-1024 c/w GZT4 BASE 24VDC
R4N-2014-23-5230 c/w GZT4 BASE 230VACOPTIONAL GZM BASE AVAILABLE (TERMINALS ALL ON ONE SIDE)
ADD AN EXTRA £0.10P FOR THIS VERSION
OPTIONAL EXTRAS FOR R 2, 3 & 4 POLE RELAYS
Part Number Size
ZG-GZ46 WAY CONNECTOR BAR(FOR EASE OF WIRING BLACKOR GREY AVAILABLE)
*SAME AS SRM HIGH IMPEDANCE VERSION
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 11
12
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
BMS Input / Output ModulesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
HC-DIM4-MI4 x digital input (VFC) multiplexer 0-10VDC output Din Railmodule trend compatible output with built in offset (directequivalent to trend) and other input versions.
Part Number
HC-DIM4-MI
HC-DIM6-MI6 x digital input (VFC) multiplexer 0-10VDC output Din Railmodule trend compatible output with built in offset (directequivalent to trend) and other input versions.
Part Number
HC-DIM6-MI
HC-RIM-1KResistance input module 1,000 (1K) to 0-10VDC. Powered froma 24VAC / DC supply. LED indicators.
Part Number
HC-RIM-1K
Part Number
HC-RM1F
HC-RM1AB
HC-RIM135Resistance input module 135 OHMS to 0-10VDC.Powered from a 24VAC / DC supply. LED indicators.
Part Number
HC-RIM135
HC-RM1FSingle relay Din Rail module with fixed switch point. 0-10VDCinput 24VAC powered fixed switchpoint at 5VDC.
HC-RM1ABSingle relay Din Rail module with adjustment and also bufferedoutput. 0-10VDC input 24VAC powered.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 12
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
13
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BMS Input / Output Modules
HC-RM2T2 stage relay module with timer. Din Rail module raise / lower,high / low & binary 0-10VDC input. 24VAC / DC powered.
Part Number
HC-RM2T
HC-RM2T
HC-RM3M3 stage relay Din Rail module (0-10VDC input) adjustable timedelay. 24VAC / DC powered.
Part Number
HC-RM3M
HC-RM4M4 stage relay Din Rail module (0-10VDC input). 24VAC / DC powered.
Part Number
HC-RM4M
HC-FRM3Fan speed relay module either in 24VAC or 230V versions.Designed for fan switching applications.
Note: An IP65enclosure for wallmountingavailable onrequest
Part Number
HC-FRM3
HC-RM4A4 stage relay module with adjustable switchpoints. On and offswitch points for each relay. (0-10VDC input) 24VAC / DCpowered.
Part Number
HC-RM4A
HC-RM6M6 stage relay Din Rail module (0-10VDC input). 24VAC / DC powered.
Part Number
HC-RM6M
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 13
14
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
BMS Input / Output ModulesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
HC-ARLRaise lower control module. Converts a 0-10V input signal intoa raise lower relay output pair 24VAC / DC powered.
Part Number
HC-ARL
Part Number
HC-MA10 VOLTAGE - 24V or 230V 10CH
HC-MA20 VOLTAGE - 24V or 230V 20CH
Part Number
HC-REF-V1
HC-PCM1-120I120VA phase-cut output Din Rail module. To convert a 0-10Vinput signal to drive a 0-20V phase cut output.
Part Number
HC-PCM1-120I
Part Number
HC-PCM2-30I
Part Number
HC-ABC
HC-MA RANGEAlarm integration modules 240V or 24VAC / DC available inboth 10 channel and 20 channel versions. Units provide a relayoutput in the event of an alarm signal appearing on any one ormore inputs.
HC-PCM2-30IDual 30VA phase-cut output Din Rail module. To convert 1 or 20-10VDC contact input signals to 1 or 2, 0-20V phasecutoutputs.
HC-ABCAnalogue buffer conversion module, designed to convert andbuffer an analogue input signal to a voltage output. 24VAC / DCpowered.
HC-REF-V1Provides 0-10VDC and 4-20MA outputs in aswitch selectable range. The unit is powered bya 24VAC plug top PSU (included with the unit).The unit can be used to test actuators on benchtop prior to installation.
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 14
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
15
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BMS Input / Output Modules
Part Number
HC-DAOM
Part Number Description
HC-VMUX 4 CH ANALOGUE INPUT MULTIPLEXER
Part Number
HC-TXD 6VA
HC-TXD 25VA
HC-TXD 30VA
HC-TXD 60VA
HC-DAOMDual analogue output module, converts a 0-10VDC or 2-10VDCinput signal to 2 x 0-10VDC or 2 x 2-10VDC output signals.24VAC / DC powered.
HC-VMUXMultiplexes four 0-10V analogue signals on to two analoguelines. this doubles the number of analogue inputs available.24VAC / DC powered.
Part Number Description
HC-VDEMUX 4 CH ANALOGUE DEMULTIPLEXER
HC-VDEMUXDemultiplexis one switched 0-10V analogue input to fouranalogue outputs. This requires two analogue lines one for theswitched 0-10V and one for the output selection,this doublesthe number of analogue outputs available. 24VAC / DCpowered.
Part Number Description
HC-AMMM 4 CH MIN, MAX AND AVERAGING MODULE
HC-AMMMProvides the average minimum,maximum and middle valuesof the selected 0-10V inputs, up to 5 inputs can be selected. 24VAC / DC powered.
HC-TXD230V - 24VAC Din Rail transformers. Various VA ratings. Listedbelow transformers fitted with fuses on both the input and theoutput.
Part Number
HC-SEM62.1
HC-SEM62.1 30VA RATED230VAC - 24VAC power supply Din Rail module. LED indicationon secondary power supply. Integral self re-setting primaryfuse, secondary power supply.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 15
16
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
BMS Input / Output ModulesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
HC-PS-24-24-1-C COMMON 0V24VAC to 24VDC 1AMP convertor. A low costpower supply providing a regulated 24VDCoutput from a 24VAC input - Common OV.
Part Number
HC-PS-24-24-1-C (COMMON 0V)
HC-PS-24-24-1-F FLOATING GUARD24VAC to 24VDC 1AMP convertor. A low costpower supply providing a regulated 24VDCoutput from a 24VAC input - Floating OV.
Part Number
HC-PS-24-24-1-F
Part Number
HC-VI
Part Number
HC-CSM-2
Part Number
HC-RLA-AC
HC-VIIs designed to convert a 0-10VDC input signal to a 4-20MAcurrent output. Unit is powered by a 24VAC / DC and can powera current loop signal.
HC-CSM-2Current splitter module designed to split an analogue input to 2x 4-20MA current outputs. Powered by 24VAC / DC and canpower a current loop signal.
HC-PS-DR-45-2424VDC 1AMP power supply Din Rail module. 230VAC input -24VDC out. LED power on indicator.
Part Number
HC-PS-DR-45-24
REDUCEDPRICE
REDUCEDPRICE
HC-RLA-ACIsolated raise / lower to analogue convertor. Converts a raise-lower input signal into a 0-10V analogue output.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 16
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
17
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BMS Input / Output Modules
Part Number
HC-CSM-3
Part Number
HC-CSM-4
HC-VSMVoltage scaling module designed to scale a 0-60V input signalto a 0-10VDC output. Powered by 24VAC / DC.
Part Number
HC-VSM
HC-SSR-3-63 phase solid state relay 6KW.
Part Number
HC-SSR-3-6 24VDC VERSION
HC-SSR-3-6 230V VERSION
Part Number
HC-VSR
Part Number
HC-FC-8
HC-CSM-3Current splitter module designed to split an analogue input to 3x 4-20MA current outputs. Powered by 24VAC / DC and canpower a current loop signal.
HC-CSM-4Current splitter module designed to split an analogue input to 4x 4-20MA current outputs. Powered by 24VAC / DC and canpower a current loop signal.
HC-VSRVoltage splitter and reference module takes 1 x 0-10VDC andsplits and buffers the signal to give 3 x 0-10V outputs. Themodule also includes an adjustable reference output, factory setto 10V.
HC-FC-8New compact single phase trial fan speed controller. 8AMPrated 230V powered for regulation of single phase AC motors.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 17
18
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Water Leak Detection Modules Da
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AX-WLD2The AX-WLD2 is a range of single and dual zone waterdetection modules designed for Din Rail mounting. The waterleak module can have a total of 200m of cable connected toeach input (cable and header). A relay output provides an alarmsignal to a remote alarm annunciator or a BMS system. Thesensitivity is adjustable to ensure false returns are not given.An optional alarm buzzer can be incorporated.Features• A total of 200m cableon each zone
• Adjustable sensitivityon each zone
• Can take inputs froma mixture of cablesensors, rain sensorsor point sensors
• Audible alarm option• LED indication ofeach channel alarm
• Normally open and closed contacts• Relay output to BMS or Alarm annunciator.
DEWPOINT CONDENSATIONSENSORSThe HC-CDM is a low-cost selfcontained sensor for detecting the on-setof condensation.24VAC/DC poweredcurrent output orvolt free changeover outputs.
AX-WCS-X
AX-WLD-DTA
AX-WRS1
AX-WPS
Part Number Description
AX-WLD2-24 24VAC / DC ALARM ONE OR TWO ZONEDETECTION MODULE
AX-WLD2-230 230VAC ALARM ONE OR TWO ZONEDETECTION MODULE
AX-WLD2-24-A 24VAC / DC ALARM ONE OR TWO ZONEDETECTION MODULE & ALARM BUZZER
AX-WLD2-230-A 230VAC ALARM ONE OR TWO ZONE DETECTIONMODULE & ALARM BUZZER
AX-WCS-5 CABLE SENSOR FOR WLD, 5M CABLE 3M HEADER
AX-WCS-10 CABLE SENSOR FOR WLD, 10M CABLE 3M HEADER
AX-WCS-15 CABLE SENSOR FOR WLD, 15M CABLE 3M HEADER
AX-WCS-20 CABLE SENSOR FOR WLD, 20M CABLE 3M HEADER
AX-WCS-xx CUSTOMER SPECIFIED CABLE AND HEADER LENGTH
AX-WPS POINT SENSOR FOR WLD
AX-WRS1 RAIN SENSOR WITH 1M CABLE FOR WLD
AX-WLD-DTA SINGLE ZONE DRIP TRAY VERSION
AX-WLD ENCLOSURE FOR AX-WLD2
Part Number
HC-CDM
NEWPRODUCT
REDUCEDPRICE
RH & T TRANSMITTERS AX-RHT SERIESThe AX-RHT-3 range of RH&T Transmittersare designed for high accuracy relativehumidity and temperature measurement,having selectable analogue output of bothvalues. These units are extremely reliable andhave excellent stability and a quick responsetime, the standardaccuracy range is 3%.
SpecificationRH Accuracy:3% (between 5% and 95% RH)Temperature Accuracy: + / - 0.1 °CSensor Type: CapacitiveSensor Protection: PTFE FiltersPower Supply: For 0-10V DC - 24VAC
/ DC +/-15%For 4-20MA - 24VDC+/-15%
Output: 4-20MA or 0-10VDC or0-5VDC (selectable)
Output Ranges: RH: 0-95%Temp: S: -10°c to +40°c
D: 0°c to 70°cO: -20°c to +50°c
Ambient Temp: 0-50°c, 0-95% RHProtection: S - IP23
D,O, - IP65.
Part Number
AX-RHT3-S3 ROOM VERSION
AX-RHT-D3 DUCT VERSION
AX-RHT-O3 OUTSIDE VERSION
AX-RHT-D3
AX-RHT-03
AX-RHT3-S3
Dewpoint Sensor / Relative Humidityand Temperature Transmitters
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:17 Page 18
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
19
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Air Velocity
SINGLE POINT AIR VELOCITY TRANSMITTERSA range of Single Point Air Velocity Transmitters for use inductwork, with a choice of either 0-10VDC or 4-20MA outputfor each output range.Features• 8% Accuracy• 24VAC / DC supply• Damped output for stable control signal• Range 0-4M/SEC
SINGLE POINT AIR VELOCITY AND TEMPERATURETRANSMITTERA Single Point Air Velocity and Temperature Transmitter for usein ductwork, with either a 0-10VDC or 4-20MA output for theairflow and 0-10VDC output range for the temperature. Includesduct flange.Features• Includes adjustable duct flange• 5% Accuracy• Two ranges available 8 & 16M/SEC (jumper selectable).
AIR VELOCITY PROBES - MULTIPOINTStainless Steel Multipoint Air Velocity Probes for use inductwork. The two probes can be connected to the relevant airpressure transmitter to output velocity pressure to the BMSwhich can then accurately work out air velocity in M/SEC.Features• Includes duct flange plates for flat ducts• Each set includes a pair of stainless steel probes• Double gasket seals the probe to the duct• Push-on connectors to suit 8mm tube.
AIR VELOCITY PROBES A range of small Air Velocity Probes for use in ductwork. Theprobes can be connected to the relevant AX-AV air velocitytransmitter to output velocity pressure to the BMS which canthen accurately work out air velocity in M/SEC.Features• Includes duct flange plates for flat ducts• Gasket seals the probe to the duct• Push-on connectors to suit 8mm tube.
Part Number Description
AX-AV-SPH4 AV TRANSMITTER 0-4M/SEC 0-10V
AX-AV-SP4-1 AV TRANSMITTER 0-4M/SEC 4-20MA O/P
AX-AV-SP4-V AV TRANSMITTER 0-4M/SEC 0-10VDC O/P
Part Number Description
AX-AV-SP-ESF-35 SINGLE POINT AIR VELOCITY ANDTEMPERATURE TRANSMITTER
Part Number Description
AX-AV-EP-200 TWIN PROBE 200MM
AX-AV-EP-250 TWIN PROBE 250MM
AX-AV-EP-300 TWIN PROBE 300MM
AX-AV-EP-350 TWIN PROBE 350MM
AX-AV-EP-400 TWIN PROBE 400MM
AX-AV-EP-450 TWIN PROBE 450MM
AX-AV-EP-500 TWIN PROBE 500MM
Part Number Description
AX-AV-MPP-600 2 x MULTIPOINT PROBES 600MM
AX-AV-MPP-700 2 x MULTIPOINT PROBES 700MM
AX-AV-MPP-800 2 x MULTIPOINT PROBES 800MM
AX-AV-MPP-1000 2 x MULTIPOINT PROBES 1000MM
AX-AV-MPP-1250 2 x MULTIPOINT PROBES 1250MM
AX-AV-MPP-1500 2 x MULTIPOINT PROBES 1500MM
AX-AV-MPP-1750 2 x MULTIPOINT PROBES 1750MM
AX-AV-MPP-2000 2 x MULTIPOINT PROBES 2000MM
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 19
20
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Light Level and Occupancy Detectors and Microwave SensorsDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
LIGHT LEVEL AND OCCUPANCY DETECTORSA range of low cost Light Level and Occupancy Sensors forsurface, flush and wall mounting. There are switched live andvolt free output variants the light level can be switched off ifrequired. Mains and low voltage variants.Features• Low cost solution• Flush, surface or wall mounted• Adjustable Timer• Optional switched live or volt free outputs.
LIGHT LEVEL TRANSMITTERSA low cost Light Level Transmitter for outside use.Features• Low cost solution• IP65 outside or surface mounted• Analogue 0-10VDC output• 0-2000/4000/10000 Lux (PIN ADJUSTMENT)
MICROWAVE OCCUPANCY DETECTORSThe MWS Microwave Presence Detectors are designed toprovide automatic control of lighting, heating or ventilationloads. The MWS detects movement using a highly sensitivemicrowave detector. This works by emitting low powermicrowave signals and measuring the reflections as the signalsbounce off moving objects. All the units are programmed by ahand-held programmer.Features• Wall, ceiling or surface mounting• Volt free contact or switched live output• Handheld IR Programming• Compact housing.
Part Number Description
AX-OCF-230F SWITCHED LIVE OUTPUT, 230VAC,FLUSH MOUNTED
AX-OCF-230S SWITCHED LIVE OUTPUT, 230VAC,SURFACE MOUNTED
AX-OCF-230W SWITCHED LIVE OUTPUT, 230VAC,WALL MOUNTED
AX-OCF-230-FVF VFC OUTPUT, 230VAC, FLUSH MOUNTED
AX-OCF-230-SVF VFC OUTPUT, 230VAC, SURFACEMOUNTED
AX-OCF-24-FVF VFC OUTPUT, 24VAC, FLUSH MOUNTED
AX-OCF-24-SVF VFC OUTPUT, 24VAC, SURFACEMOUNTED
Part Number Description
AX-OC-MWS MICROWAVE OCCUPANCY DETECTOR -SWITCH LIVE O/P
AX-MWS-1A-PRM-V
MICROWAVE OCCUPANCY DETECTOR -VFC O/P
AX-MWS-3A-PRM MICROWAVE OCCUPANCY DETECTOR -SWITCH LIVE O/P
AX-MWS-3A-PRM-V
MICROWAVE OCCUPANCY DETECTOR -VFC O/P
AX-MWS-DD-LCD-HS
HANDHELD PROGRAMMER C/WDISPLAY
AX-MWS-UHS HANDHELD ON/OFF AND LUXCONTROL
Part Number Description
AX-LL-O IP65 WALL MOUNT, 0-10VDC O/P
CREDIT ACCOUNT HOLDERS can accesstheir live prices, privileged offers,special news and other informationwhen they log into the portal on our
home page.
www.heatcombustion.co.uk
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 20
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
21
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Electro Thermal Fusible Links and Emergency Stop Buttons
ELECTRO THERMAL FUSIBLE LINKElectro thermal fusible link for use in boiler houses.The electro thermal fusible link is for installing in a positionwhere a fire hazard may occur, e.g. above a burner, an air heateror boiler. The fire will melt the fusible metal link and interruptthe electrical supply to either a gas valve or an alarm etc. Thelink consists of a purpose built cast aluminium box with aperforated cover having a temperature sensitive fuse. The unitshould be mounted so that the perforated cover facesdownwards and the ventilation holes in the back of the boxmust not be obstructed.The link is electrically rated at 5 amps maximum on200/250volts, single phase, 50 hertz and melts at 72°C. Cast version Approx. 2” x 2” x 1”Metal box version approx. 3” x 2” x 1”
CAST VERSION
METAL BOX VERSION
Part Number
TL1 (CAST TYPE)
ETL (METAL BOX TYPE)
ETL SPARE FUSE
Part Number
KOB
SHROUDED KNOCK OFF BUTTONThe SKOB ”The Shrouded Knock Off Button” is designed toallow emergency shut down of electrical equipment. Theintegral shroud reduces the risk of accidental plant shutdownand nuisance tripping. The button can easily be pressed from anaccute angle.Electrical Information: 10(6)AMP 250V. “Normally closed”contact switch.
IP65 Rated
Part Number
SHROUDED KOB
Part Number
KR-KOB
EMERGENCY STOP BUTTON - C/W KEY RESET The emergency stop button is designed for use in boiler housesetc. with gas valves / fire valves and accessory equipment as anemergency button to sound an alarm / render equipment safeby the operation of an electric switch which must be activatedmanually by hand pressure.To reset the mechanism, turn the key in a clockwise directionand the switch will automatically return to the original position.
IP65 Rated
EMERGENCY STOP BUTTON The emergency stop button is designed for use in boiler housesetc. With gas valves / fire valves and accessory equipment asan emergency button to sound an alarm / render equipmentsafe by the operation of an electric switch which must beactivated manually by hand pressure.To reset the mechanism, turn the red push button in aclockwise direction and the switch will automatically return tothe original position.
IP65 Rated
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 21
22
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
L.E.D. Panel Indicator Lamps and Isolators / Selector SwitchesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
L.E.D. PANEL INDICATOR LAMPS AD22 / AD16AD22 - 22mm versionsAD16 - 16mm versions
Features• Expected life span 30,000hrs• Intensity 60CD/M2
• Rated current 20MA• Insulating resistance 2m• Voltage tolerance + / - 20%• Operating temperature -25°C +55°C• Vibration frequency 2.8HZ acc 0.7g• IP rating IP65• CE marked• LED type illuminationNOTE: Lamp Test WiringT = Testing TerminalS = Signal TerminalC = Current Terminal (power in-put line)
Part Number Voltage
AD22-R (RED) 240V OR 24VAC / DC
AD22-A (AMBER) 240V OR 24VAC / DC
AD22-G (GREEN) 240V OR 24VAC / DC
AD22-B (BLUE) 240V OR 24VAC / DC
AD22-W (WHITE) 240V OR 24VAC / DC
AD16-R (RED) 240V OR 24VAC / DC
AD16-A (AMBER) 240V OR 24VAC / DC
AD16-G (GREEN) 240V OR 24VAC / DC
AD16-B (BLUE) 240V OR 24VAC / DC
AD16-W (WHITE) 240V OR 24VAC / DC
NOTE: “LT” VERSION NOW AVAILABLE. THIRD CONTACTFOR LAMP TEST OPTION (AD22 VERSIONS ONLY)
AD22-R-LT (RED) 240V OR 24VAC / DC
AD22-A-LT (AMBER) 240V OR 24VAC / DC
AD22-G-LT (GREEN) 240V OR 24VAC / DC
AD22-B-LT (BLUE) 240V OR 24VAC / DC
AD22-W-LT (WHITE) 240V OR 24VAC / DC
AD22 FIXING TOOL
Part Number
AD22 FIXING TOOL
EMERGENCYISOLATORSPlastic enclosedIsolators LB Series 4Pole up to 80 AMPS.
Part Number Size
LB204P 20AMPS
LB324P 32AMPS
LB404P 40AMPS
LB634P 63AMPS
LB804P 80AMPS
IP65 Rated
2/3 POSITION SELECTOR SWITCHES ANDPUSH BUTTONSA range of 22.5mm 2&3 position Selector Switches.
Part Number Description
PB22SS2B-1A 2 POS SELECTOR SWITCH C/W 1 N/O CONTACT
PB22SS4B-1AA 3 POS SELECTOR SWITCH C/W 2 N/O CONTACT
PB22BFB-1A BLACK PUSHBUTTON C/W 1X N/O CONTACT
PB22BFG-1A GREEN PUSHBUTTON C/W 1X N/O CONTACT
PB22BFR-1B RED PUSHBUTTON C/W 1X N/C CONTACT
Accesssories
PB22-A NORMALLY OPEN CONTACT BLOCK
PB22-B NORMALLY CLOSED CONTACT BLOCK
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 22
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
23
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Bailey & Mackey Range of Pressure Transmitters
MODEL 481 STATIC POSITIVE PRESSURETRANSMITTER This series of miniature pressure transducers have a piezo-resistive sensor and a unique conductive seal that eliminatesinternal wire bonding thus enhancing reliability. Zero and fullscale adjusters are provided under the top cover. They are idealfor use in areas requiring exact pressure measurement, lowhysteresis and long term stability.For all applications where air, oil or water is to be monitored.Also suitable for non corrosive gases (but not certified).
Features• Piezo-resistive sensor• Ranges from full vacuum to 20 bar• Type 481A for 12V / 24VDC input, 4-20MA output• Type 481B for 24VAC / DC input, 0-10VDC output• Supplied with 1M flying lead• Pressure connection 1⁄4" bsp parallel male brass• CE marked to EN 61000-6-2• Complete with mounting bracket• Enclosure rating lP65• Weight 350 grams
Part Number Ranges
481 (A or B) 1BAR 0-1BAR
481 (A or B) 4BAR 0-4BAR
481 (A or B) 6BAR 0-6BAR
481 (A or B) 10BAR 0-10BAR
481 (A or B) 16BAR 0-16BAR
481 (A or B) 20BAR 0-20BAR
NOTE: OTHER RANGES AVAILABLE ON REQUEST
MODEL 482 LIQUID DIFFERENTIAL PRESSURETRANSMITTERThis series of miniature pressure transducers have a piezo-resistive sensor and a unique conductive seal that eliminatesinternal wire bonding thus enhancing reliability. Zero and fullscale adjusters are provided under the top cover. They are idealfor use in areas requiring exact pressure measurement, lowhysteresis and long term stability.For all applications where air, oil or water is to be monitored.Also suitable for non corrosive gases (but not certified).
Features• Piezo-resistive sensor• Ranges from full vacuum to 20 bar• Type 482A for 12V / 24VDC input, 4-20MA output• Type 482B for 24VAC / DC input, 0-10VDC output• Supplied with 1M flying lead• Pressure connection 1⁄8" bsp parallel female brass• CE marked to EN 61000-6-2• Complete with mounting bracket• Enclosure rating lP65• Weight 350 grams
Part Number Ranges
482 (A or B) 400MBAR 0-400MBAR
482 (A or B) 1BAR 0-1BAR
482 (A or B) 2BAR 0-2BAR
482 (A or B) 4BAR 0-4BAR
482 (A or B) 7BAR 0-7BAR
482 (A or B) 10BAR 0-10BAR
NOTE: OTHER RANGES AVAILABLE ON REQUEST
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 23
24
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Bailey & Mackey and HK Instruments Range of Pressure TransmittersDa
tasheets are availa
ble to dow
nload from
our website www.heatcombustion.co.uk or by scanning th
e QR
code
PTH AIR DP. TRANSMITTERPTH is an electronic pressure transmitter designed primarily tomeasure total and differential air pressures in ventilationsystems.The resulting measurements are used for monitoring, controland regulation purposes via a regulator, monitoring system.Unique switch suitable for either 0-10V or 4-20MA output insame switch also has 8 selectable ranges.
Features• The maintenance / control of constant pressure at a givenposition within the duct system.
• The maintenance / control of desired underpressure within theduct system.
• The measurement of pressure differentials across filters todetermine optimum filter replacement time.
• Flow determination via differential pressuremeasurements across a standard aperture.
• Accuracy + or -3% over the operation range.
Part Number
PTH3202
Multi Ranges
-0.5 to 0.5MBAR, 0 to 1MBAR, 0 to 1.5MBAR, 0 to 3MBAR, 0 to 5MBAR, 0 to 10MBAR, 0 to 16MBAR, 0 to 25MBAR
Part Number
DPT2500-R8
Multi Ranges
-100 to +100PA, 0 to 100PA, 0 to 250PA, 0 to 500PA, 0 to1000PA, 0 to 1500PA, 0 to 2000PA, 0 to 2500PA
Duct Kit for PTH Duct Kit for DPT
HK DPT TRANSMITTERDifferential pressure transmitter DPT-3wire eight range model.Unique switch suitable for either 0-10V or 4-20MA output insame switch also has 8 selectable ranges.
Features• Response Time 0.8 / 4s selectable by push button• Bursting pressure 30kPa (model 2500)• Suitable media Air and non-aggressive gases• Measuring element Piezoresistive• Accuracy from range ±1,5% or (±6Pa <250 Pa) (including:general accuracy, temperature drift, linearity, hysteresis andrepetition error)
• Electrical interface Supply voltage 24VAC or VDC• Electrical connections 4 screw terminals, max 1.5 mm2
• Cable entry M16• Pressure connections Male 5.0mm and 6.3mm• Weight 150 grams, with accessories290 grams
• Dimensions 90.0 x 71.5 x 36.0 mm.
Special Versions to order
DPT2500-R8-D with display
DPT2500-R8-AZ with auto zero calibration
DPT2500-R8-D-AZ with display and autozero calibration
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:38 Page 24
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
25
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Air Differential Pressure Switches / ACI MCS & RIB Current / Self Calibrating Sensors
Part Number Ranges
PA10 0.2-3MBAR
930-80 0.2-2MBAR
930-83 0.5-5MBAR
930-85 1-10MBAR
KROMSCHROEDER DIFFERENTIAL PRESSURESWITCHES CPS (IP54) AND DL (IP65) VERSIONSPressure switches for air CPS / DL can be used as excess-pressure, underpressure and differential-pressure switches forair. They monitor extremely slight pressure differences andtrigger electrical switching operations when a set value isreached.
PartNumber
AdjustmentRange fortrip pressure
Constantswitchingdifferential
Protection
CPS 330 0.2-3.3MBAR 0.08 IP54
CPS 1100 1.0-11.0MBAR 0.10 IP54
DL3K-4W 0.2-3.0MBAR 0.08 IP65
DL10K-4W 1.0-10.0MBAR 0.10 IP65
CPS1100 / 330DL10K /
4W
DL3K /4W
DL3K-4W & DL10K-4W ARE COMPLETE WITHMOUNTING BRACKETS
ACCESSORIES FOR PRESSURE SWITCHES
Part Number
DUCT KIT (inc 2 x SPIGGOTTS & 2MTR TUBE)
‘T’ PIECES
SPARE SPIGGOTTS
30m ROLL OF TUBE
METAL MOUNTING BRACKET FOR CPS
METAL MOUNTING BRACKET FOR 930/PA10
DIFFERENTIAL PRESSURE SWITCH PA10 / 930CLIMAIR® (IP54)Adjustable differential pressure switch for monitoringoverpressure, vacuum and differential pressure of air or othernon-combustible, non-aggressive gases.
Features• Monitoring air filters and ventilators• Monitoring industrial cooling air circuits• Overheating protection for fan heaters• Monitoring flows in ventilation ducts• Controlling air and fire protection flaps• Frost protection for heat exchangers. ENCLOSED SOLID CORE CURRENT SWITCH ACI/MCS
VERSION
Part Number Ranges
A / MCS CURRENT SWITCH, FIXEDVERSION, SOLID CORE
A / MCS-A CURRENT SWITCH, ADJUSTABLEVERSION, SOLID CORE
ENCLOSED SOLID CORE CURRENT SWITCH RIB VERSION
Part Number Ranges
RIBXKTF CURRENT SWITCH FIXEDVERSION, SOLID CORE
RIBXKTA CURRENT SWITCH ADJUSTABLEVERSION SOLID CORE
RIBXGTA-SCAL SPLIT CORE UNIQUE SELFCALIBRATING CURRENTSWITCH
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 25
26
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Immersion Thermostats Single / Dual FunctionDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
ALRE RANGE. 15AMP RATED SPDT. IP43PROTECTION AUTO RESETSINGLE THERMOSTAT AUTO RESET
PartNumber
Range °C Diff °C Length
KR80.108-1 0-35 0.5 120mm
KR80.111-3 0-80 2 100mm
KR80.100-5 35-95 4 100mm
KR80.106-8 50-130 4 100mm
NOTE: THERMOSTATS AS STANDARD COMPLETE WITHPOCKET. STAINLESS STEEL AVAILABLE ON REQUEST
ALRE RANGE. 15AMP RATED SPDT. IP43PROTECTION SINGLE THERMOSTAT MANUAL RESET
PartNumber
Range °C Length
KR80.206 30-65 100mm
KR80.207 60-95 100mm
KR80.202 95-130 100mm
NOTE: THERMOSTATS AS STANDARD COMPLETE WITHPOCKET. STAINLESS STEEL AVAILABLE ON REQUEST
ALRE RANGE. 15AMP RATED SPDT. IP43PROTECTION DUAL THERMOSTAT
PartNumber
Range °C Limit°C Reset
KR85.600.5 35-95 60-95 HAND
KR85.400.5 35-95 35-95 THERMAL
NOTE: THERMOSTATS AS STANDARD COMPLETE WITHPOCKET. STAINLESS STEEL AVAILABLE ON REQUEST
LOW-COST AUTO RESET THERMOSTAT TSC100 IP40RATED WITH KNOB ADJUSTMENT
PartNumber
Range °C Diff °C
TSC 100 0-90 4
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 26
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
27
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AXIO Electronic Thermostat
AXIO ET RangeThe AX-ET range of Electronic Thermostats are used for themonitoring and control of fluids (gas and liquids) between therange of -5°C to +95°C. They control heating or cooling inresponse to high or low temperatures. The set point isadjustable on the pcb or via an external 1-11K OhmPotentiometer. The units also have an external offset input and anight setback input (requires a time switch). The unit includes adigital display of the temperature (or setpoint if display button ispressed). There are 4 link selectable ranges on the units. Theunits come as standard as PCB Din Rail.
Features• Four Temp. Ranges (link selectable)• Adjustable Differential (0.5 to 12°C)• Internal / External Setpoint• Heating or Cooling• Setback 0 to 10°C (requires a time switch)• Din Rail as standard or enclosure mounting available onrequest.
• LED Indication of Temperature / Setpoint• External Offset (1-11K potentiometer) -4°C to +4°C.
Part Number
ET1L 24VAC / DC
ET1L 230VAC
ET2 24VAC / DC
ET2 230VAC
ET4 24VAC / DC
ET4 230VAC
ET6 24VAC / DC
ET6 230VAC
ET1-1-24R 24V (NO DISPLAY)The AX-ET-1-24R Electronic Thermostat is used for themonitoring and control of fluids (gas and liquids) between therange of -5°C to +95°C. They control heating or cooling inresponse to high or low temperatures. The set point anddifferential are adjustable on the pcb. There are four linkselectable temperature ranges on the units. The units are24VAC / DC powered. The units come as standard as Din Railmounted, enclosure mounting available on request.
Features• Four Temp. Ranges (link selectable)• Adjustable Differential (0.5 to 12°C)• Internal Setpoint• Heating or Cooling• 24VAC / DC• Din Rail or optional enclosure mounting.• LED Indication.
Part Number
ET1-1-24R 24V (NO DISPLAY)
SENSORS FOR AXIO ET & CRPIELECTRONIC THERMOSTAT CONTROLLERS
Part Number Description
CAD-R ROOM SENSOR
CAD-I IMMERSION SENSOR
BRASS POCKET FOR IMMERSION SENSORS
S/S POCKET FOR IMMERSION SENSORS
CAD-D DUCT SENSOR
CAD-S STRAP ON SENSOR
CAD-F FLYING LEAD SENSOR
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 27
28
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
AXIO Proportional ControllersDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AX-PI PROPORTIONAL & INTEGRAL TEMPERATURECONTROLLERThe AX-PI Controller is a compact cost effective solution forcontrolling various types of terminal units. The units have twothermistor inputs for temperature and an optional remotesetpoint offset, combined with adjustable setback facilities. Theunit has one or two P.I. heating and / or cooling outputs. Theunit is designed for Din Rail mounting.
Features• Proportional and Integral Control• Adjustable Setback• 0-10V or 2-10VDC Output• Heating and / or Cooling output• Remote Setpoint option• Adjustable Proportional band• Adjustable Integral time• Din Rail mounting
Part Number
AX-PI
1-11K FASCIA MOUNTEDREMOTE POT TO SUIT
AX-RC-P1 ROOM PROPORTIONAL TEMPERATURECONTROLLERThe AX-RC-P1 proportional temperature controllers provide 0-10VDC output proportional to the difference between thesetpoint and the measured temperature. The output signal canbe used to control VAV Boxes, modulating damper motors,modulating valve actuators, relay modules or thyristor powercontrollers among others. The unit is powered from 24VAC / DC.
Features• Setpoint Adjustment• Room sensor housing• Heating or Cooling - jumper selectable• 24VAC / DC• Adjustable proportional band
Part Number
AX-RC-P1
AX-DC-P1 DUCT PROPORTIONAL TEMPERATURECONTROLLERThe AX-DC-P1 proportional temperature controllers provide 0-10VDC output proportional to the difference between thesetpoint and the measured temperature. The output signal canbe used to control VAV Boxes, modulating damper motors,modulating valve actuators, relay modules or thyristor powercontrollers among others. The unit is powered from 24VAC / DC.
Features• Internal Setpoint Adjustment• Duct sensor housing• Heating or Cooling - jumper selectable• 24VAC / DC• Adjustable proportional band
Part Number
AX-DC-P1
NOTES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 28
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
29
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
CAD-1DSDin Rail Mounted module compatible with Building ManagementSystems. Monitors air or liquid temperature, and controls oneUser Programmable switching Relay channel in response.Features• One unit covers entire -5°Cto +95°C Range
• Separate Day and NightSet-Points
• 1-10°C ProgrammableDifferential
• Heating or Cooling Function• Digital LED Display with Temperature• Connections for External Temperature Controls• Digital Data Output for Remote Display / Options• Din-Rail Mountable, small footprintType CAD-1DSInput Supply + / - 15% 24VAC / DC 35MA (max)
230V / 240VAC 1VASensor Type CAD...Temp Range -5°C to +95°C (-9°C to +99°) C/W
Ext Pot1-10°C Differential
Output Signals 1 x C / O Relay Contact 10(5)A@240vSamTalk (data outputonly)
Mounting Din Rail (included)Enclosure IP00Reset Code 6788Part Number
CAD-1DS
CAD-XR2Din-Rail Mounted extension module compatible with BuildingManagement Systems (such as CAD-2DS), providing 2 RelayOutputs.
Features• 2 x Volt Free Relay Change-Over Outputs• Individual Channel Selection for each Relay (Channels C-H)• Din-Rail Module expansion baseplate supplied (uses mountingfoot from host)
• Small FootprintType CAD-XR2Input Supply + / - 15% Provided by Host 30mA (max)Output Signals 2 x Relay Contacts
10(5)A@240vMounting Din Rail (base only)Enclosure IP00
Part Number
CAD-XR2
Reset Code6788
CAD-2DSDin Rail Mounted module compatible with Building ManagementSystems. Monitors air or liquid temperature, and controls up toeight (optional) User Programmable switching Relay channels inresponse.
Features• Two Relay Channels on-board, Six optional plug-in• One unit covers entire -5°C to +95°C Range• Separate Day and Night Set-Points• 1-10°C Programmable Stage Differential• 1-50°C Inter-Stage Differential• Heating or Cooling Function• Digital Display with Temperature and Set-Point• Connections for External Temperature Controls• Digital Data Output for Remote Display / OptionsType CAD-2DSInput Supply + / - 15% 24VAC / DC 150MA (max)
230V / 240VAC 6VASensor Type CAD...Temp Range -5°C to +95°C (-9°C to +99°) C/w/Ext Pot
1-10°C DifferentialOutput Signals 2 x C / O Relay Contact 10(5)A@240V
6 x plug-in Relays,SamTalk
Mounting Din Rail (included)Enclosure IP00Reset Code 6788
Part Number
CAD-2DS
SENSORS FOR CAD ELECTRONIC THERMOSTATS &CAD-PI ELECTRONIC CONTROLLERS
Part Number Description
CAD-R ROOM SENSOR
CAD-I IMMERSION SENSOR
BRASS POCKET FOR IMMERSION SENSORS
S/S POCKET FOR IMMERSION SENSORS
CAD-D DUCT SENSOR
CAD-S STRAP ON SENSOR
CAD-F FLYING LEAD SENSOR
Reset Code 6788
Electronic CAD Thermostat
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 29
30
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Proportional Electronic Controller Frost ThermostatDa
tasheets are availa
ble to dow
nload from
our website www.heatcombustion.co.uk or by scanning th
e QR
code
TSA-A2P AUTO RESETFrost thermostat with 6 metre capillary sensor. Application forfrost protection for example on air-conditioning systems toprevent the build up of ice on filters, fans and coils etc.Control Range: -30 TO +15°CSwitch Rating: 10 AMP AT 230VACProtection: IP44Housing Dimension: 85MM x 75MM x 39MM
Part Number Description
TSA-A2P AUTO RESET
Accessories
PACKET OF CLIPS FOR CAPILLARYTHERMOSTAT (PACK OF 5)
NOTE: UNIT COMES COMPLETE WITH MOUNTING BRACKET
TSA-R2P MANUAL RESETFrost thermostat with 6 metre capillary sensor. Application forfrost protection for example on air-conditioning systems toprevent the build up of ice on filters, fans and coils etc.Control Range: -30 TO +15°CSwitch Rating: 10 AMP AT 230VACProtection: IP44Housing Dimension: 85MM x 75MM x 39MM
Part Number Description
TSA-R2P MANUAL RESET
Accessories
PACKET OF CLIPS FOR CAPILLARYTHERMOSTAT (PACK OF 5)
NOTE: UNIT COMES COMPLETE WITH MOUNTING BRACKET.
CAD-PIA versatile Din Rail mounted electronic control module.Monitors air or liquid temperature, and controls from one to(optionally) 2 or 3 Proportional Analogue Channels.
Features• One Proportional Control Channel standard, 2 or 3 optional• One unit covers entire -5°C to +95°C Range• Separate Day, Night and Low-Level Set-Points• Up to 0.25°C Accuracy• 1-20°C Proportional Band (Span)• 0-50°C Dead Band• Heating, Cooling (or optionally both) Function• Digital Display with Temperature, Set-Point and Status• Connections for External Temperature Controls and Displays• Din-Rail Mountable, small footprintType CAD-PIInput Supply +/- 15% 24VAC / DC 75MA (max)Sensor Type CAD...Temp Range -5°C to +95°C
-9°C to +99°C c/w Ext Pot1-20°C Span 0-50°C Adjust.
Output Signals 1 x 0-10V ProportionalChannel Standard2 x 10V Optional
Mounting Din Rail (included)Enclosure IP00
Part Number
CAD-PI
Optional Items
CAD-XM1A ADD ON MODULE FOR 2 / 3 STAGE
CAD-POT EXTERNAL SET POINT CONTROL
CAD-POT
Reset Code 6788
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:37 Page 30
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
31
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Miscellaneous Thermostats - Switches
PTR030Outdoor frost thermostat IP65 weatherproof range -30°C to+30°C 10AMP 230V SPDT.
.
Part Number
PTR030
Part Number
ARTH300
CFS1 (1.5M) CYLINDER STRAP
LR80-109Duct thermostat Auto Reset range 0°C to 35°C IP43 rigid stem15AMP 250VAC.
Part Number
LR80-109
RAA11 (CONCEALED DIAL)Room thermostat single stage 5°C to 30°C SPDT 6 AMP.
Part Number
RAA11(CONCEALED)
RAA21 (EXPOSED DIAL)Room thermostat single stage 5°C to 30°C SPDT 6 AMP.
Part Number
RAA21 (DIAL)
RAK-TWDuct thermostat Auto Reset-10°C to +50°C. IP43 rigid stem10AMP 250VAC.
Part Number
RAK-TW
DANFOSS ECOTimed programmable Radiator Thermostat head. To upgrade‘old’ Radiator Thermostats with the new intelligent type, withmany savings. Replaces Drayton / Honeywell / Pegler / Siemens and many more.
Part Number
014G00510
ARTH300Clamp on thermostat forpipes (as standard) orwith optional strapfor cylinder IP40protection 0-90°C.
Part Number
HI-HF
HUMIDISTAT - HI-HFSingle stage duct humidistat Auto Reset 30 - 100% RH IP65 15AMP rated.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 31
32
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Miscellaneous Thermostats - Switches - HumidistatDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Part Number
37001
PSG 901 SERIES GAS PRESSURE SWITCHGas pressure switch 1⁄4” male connection for positive pressure.Ranges: 10-50 MBAR(Other ranges available on request)
Part Number
PSG 901.62
Part Number
AFS-262-HT
FLOW SWITCH - FS1Water paddle flow switch 15 AMP rated 1” pipesize connectionC/W paddle. Operating temperature -20°C to +110°C. IP54.
Part Number
FS1
Part Number
JSF-1KL
AIR FLOW SWITCH - JSL1-EAir flow paddle switch IP65 15 AMP rated.
Part Number
JSL1-E
LEVEL SWITCH - JSF-1KLLiquid level switch horizontal mounting. 1“ BSP. Male connection - 15AMP rated IP54.
PRESSURE SWITCH - 37001 (STATIC PRESSURE)WITH ADJUSTABLE DIFFERENTIALPressure switch IP30 range 0-6 BAR. 1⁄4” BSP connection.
PRESSURE SWITCH - AFS-262-HTAir D.P. Switch high temperature range 0.13 - 30 MBAR mediatemp 300°C. Comes complete with 2 x Brass Adaptors for usewith 1⁄4” copper tube, (copper tube available on request).
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 32
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
33
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Miscellaneous Thermostats - Switches
FLOAT SWITCH - LL13/LL15Sealed level float switch 3m and 5m cable media temp -25°C to+60°C IP67 protection.
Part Number
LL13 3M VERSION
LL15 5M VERSION
FLOAT SWITCH - A96EOil level / float switch. To control level of diesel or hightemperature liquids (max 130°C and 4 BAR).
Part Number
A96E
TIMER - HC-PET PLANT EXTENSION TIMERElectronic plant extension timer multi ranges from 10 minutesto 9 hours, flush or surface mounting fits a standard back box.24VAC OR 230VAC powered simple operation.
Part Number
HC-PET
TIMER - MT-TUA-17S-11-9240Multifunction timer. Din Rail 8 time ranges from 1 sec to 10days - wide range from 12V-240VAC / DC.
Part Number
MT-TUA-17S-11-9240
Part Number
LR07 10M
LR07 10M
TLSWMS1246 MULTI - SELECTORSWITCH (230VAC ONLY)Multi-selectable control of domestic orcommercial electric loads. Also suitable formany air conditioning units.Switchesload on for a limited time only.Pressing the buttonselects each timelag choice in turn.The load thenremains on for thechosen time lagbefore switching offautomatically.
Part Number
TLSWMS1246
NEWPRODUCT
WRAS APPROVED FLOAT SWITCH -TYPE LR07Sealed level float switch, 10m cable asstandard. WRAS Approved.Max media temp 23°C
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 33
34
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
MiscellaneousDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
ANNUNCIATORS - HC-AAThe HC-AA is a range of 1, 2, 3 and 4 channel alarmannunciators containing a built in sounder, mute switch andalarm relay. The units provide local audible and visual alarmindications and an alarm relay for remote indication. To reduceunwanted alarms the unit has an adjustable input time delay.Once an input has alarmed the condition is latched until themute switch is pressed to accept the current alarms. The unitsare mounted on a single gang front plate for easy installation.
Features• Audible alarm• Alarm output relay• 24VAC / DC powered• Red / Green LED indication for each input• Adjustable input delay• Sounder mute button
FIREMAN SWITCH - WR9103/SW3Fireman switch key operated. NORMAL - OFF - EXTRACT only.
Part Number
WR9103/SW3
SPARE KEY (FOR ABOVE)
CAD-AP - MULTIMODE ALARM POINTA versatile audible/visual alarm point to BS5733, acceptingeither 24VAC / DC, 230V or a 0-10V input.
Part Number
CAD-AP
WIND SPEED SENSOR - AX-WSD-VThe AX-WSD-V wind speed and direction sensor is designed togive an analogue output of the wind speed and direction values.This is suitable for applications such as automatic windowclosure and outside air damper control. The units aremanufactured from anodized aluminium alloy, UPVC andstainless steel with moulded polypropylene cups. The units arelightweight (less than 250 grams) yet very robust.
Features• Wind Speed and Direction analogue outputs• Damped output for a stable control signal
Part Number
AX-WSD-V
Part Number Description
HC-AA-1 1 STAGE ALARM ANNUNCIATOR
HC-AA-2 2 STAGE ALARM ANNUNCIATOR
HC-AA-3 3 STAGE ALARM ANNUNCIATOR
HC-AA-4 4 STAGE ALARM ANNUNCIATOR
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:18 Page 34
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
35
Datasheets are availa
ble to dow
nload from
our website www.heatcombustion.co.uk or by scanning th
e QR
code
Smoke Detectors Lacron Time Switches
SMOKE DETECTORS - GS-SD2000-N / PThe GS-SD2000 Duct Smoke Detector has the option of either aPhotoelectric sensor or an Ionisation sensor for hightemperature applications, the sensor heads are interchangeable.The sensor samples air currents passing through a duct using arange of sampling tubes and has 2 alarm relay outputs toswitch on fans, blowers etc and send an alarm to the BMS oralarm panel.
Features• 24VAC / DC or 120 / 240VAC versions• Simple change out of Photo or Ion heads• Sampling tube for ducts 1” to 12”• Clear cover for easy visual inspection• Built in reset switch that is also an alarm testswitch
• 2 x Alarm relay outputs.
Part Number Description
GS-SD2000-N IONISATION SMOKE DETECTOR
GS-SD2000-P PHOTOELECTRIC SMOKE DETECTOR
SD-STN5 FAST TUBE TYPE SAMPLING TUBE(FOR DUCTS UP TO 8FT WIDE)
TIME SWITCHESMicrocomputer-Based Time switches.
Features• Single-Channel and Two-Channel Time Switch• Astronomical Adaption of Switching Times• Summer Time / Winter Time change over• Timer from 1 sec to 59 min• Non-Volatile 56 Switching Actions per day• Random Switch Generator• Pulse Switching Commands from 1 sec to 59 min• Radio Controlled Operation• Input for Remote Control• Permanent ON / OFF Switching• Power Reserve by Lithium Battery orSupercapacitor
Part Number Description
MICRO1 240V DIN RAIL
MICRO2 240V DIN RAIL
MLU2000-1 SINGLE CHANNEL 240V
MLU2000-2 TWO CHANNEL 240V
52BE F / M KIT FOR MLU
52BW S / M KIT FOR MLU
52BN DIN RAIL KIT FOR MLU
Heat & CombustionSupplies Limited Tel: (029) 20 463345Fax: (029) 20 463346
Email: [email protected]
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:57 Page 35
36
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
AXIO Thyristor / Electric Heater ControlsDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AX-MPR1-2 (SINGLE PHASE)The AX-MPR1-2 Din Rail mounting Power Controllers aredesigned to provide continuously adjustable control of electricheating loads from a BMS Controller or similar. Applicationsinclude electric heating coils, heating cables and electricfurnaces. The AX-MPR1-2 use solid-state switching with “zerocrossing technology” for minimum RFI and provides accurateswitching control. All Power Controllers in this series featureOver Temperature Protection with automatic reset, LED Indicationof Output ON and are designed to mount on TS35 section DinRail. No additional heatsinks are needed.
Features• 0-10VDC Control Input • Line Powered• 2KW Output • Neutral Pass Through Terminals• PWM Control • LED Indication• Auto Reset Over • Din Rail (TS35)MountingTemperature Protection
• Single Phase
AX-MPR1-4 / 6 / 9 (SINGLE PHASE)The AX-MPR1 Series of Din Rail mounting Power Controllers aredesigned to provide continuously adjustable control of electricheating loads from a BMS Controller or similar. Applicationsinclude electric heating coils, heating cables and electricfurnaces. The AX-MPR1 Series use solid-state switching with“zero crossing technology” for minimum RFI and providesaccurate switching control. All Power Controllers in this seriesfeature Over Temperature Protection with automatic reset andAlarm Output, LED Indication of Output ON and are designed tomount on TS35 section Din Rail. No additional heatsinks areneeded.Features• 0-10VDC Control Input• 4KW, 6KW and 9KW Models• PWM Control• Auto Reset Over Temperature Protection• Single Phase• 24VAC / DC Powered• Neutral Pass Through Terminals• LED Indication• Din Rail (TS35)Mounting
Part Number
AX-MPR1-4
AX-MPR1-6
AX-MPR1-9
AX-MPR3-6 (THREE PHASE)The AX-MPR3-6 Din Rail Power Controller is designed to provide continuously adjustable control of electric heating loads from a BMSController or similar. Applications include electric heating coils, heating cables and electric furnaces. The AX-MPR3-6 use solid-stateswitching with “zero crossing technology” for minimum RFI and provide accurate switching control. All Power Controllers feature OverTemperature Protection with automatic reset and Alarm Output, LED Indication of Output ON and are designed to mount on TS35 sectionDIN Rail. No additional heatsinks are needed.Features• 0-10VDC Control Input• 6KW Model• PWM Control• Auto Reset Over Temperature Protection• Three Phase• 24VAC / DC Powered• Alarm Output• LED Indication• Din Rail (TS35) Mounting
Part Number
AX-MPR3-6
Part Number
AX-MPR1-2
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 36
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
37
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AXIO Thyristor / Electric Heater Controls
AX-MPR3-12 / 18 (THREE PHASE)The AX-MPR3 Din Rail Series of Power Controllers are designedto provide continuously adjustable control of electric heatingloads from a BMS Controller or similar. Applications includeelectric heating coils, heating cables and electric furnaces. TheAX-MPR3 Series use solid-state switching with “zero crossingtechnology” for minimum RFI and provide accurate switchingcontrol. All power controllers in this series feature OverTemperature Protection with automatic reset and Alarm Output,LED Indication of Output ON and are designed to mount on TS35section Din Rail. No additional heatsinks are needed.
Features• 0-10VDC Control Input• 12KW and 18KW Models• PWM Control• Auto Reset Over Temperature Protection• Three Phase• 24VAC / DC Powered• Alarm Output• LED Indication• Din Rail (TS35) Mounting
AX-PPR3-27 / 36 / 54 (THREE PHASE)The AX-PPR3 range of Power Controllers are designed to providecontinuously adjustable control of electric heating loads from aBMS Controller or similar. Applications include electric heatingcoils, heating cables and electric furnaces. The AX-PPR3 Seriesuse solid-state switching with “zero crossing technology” forminimum RFI and to provide accurate switching control. AllPower Controllers in this series feature Over TemperatureProtection with automatic reset and Alarm Output, LED Indicationof Output ON and are designed for panel mounting. The AX-PPR3-54 features integral cooling fans which turn onautomatically when required. No additional heatsinks or fans areneeded.Features• 0-10VDC Control Input• 27KW, 36KW and 54KW Models• PWM Control• Auto Reset OverTemperature
• Three PhaseProtection
• 24VAC / DCPowered
• Alarm Output• LED Indication• Small Footprint
Part Number
AX-MPR3-12
AX-MPR3-18
Part Number
AX-PPR3-27
AX-PPR3-36
AX-PPR3-54
AX-PPR3-72 / 105 (THREE PHASE)The AX-PPR3-72 and AX-PPR3-105 Power Controllers are designedto provide continuously adjustable control of electric heating loadsfrom a BMS Controller or similar. Applications include electricheating coils, heating cables and electric furnaces. The AX-PPR3Series use solid-state switching with “zero crossing technology” tominimise RFI and provide accurate switching control. All PowerControllers in this series feature Over Temperature Protection withautomatic reset and Alarm Output, LED Indication of Output ON andare designed for panel mounting. The AX-PPR3-72 and AX-PPR3-105 feature an integral cooling fan which turns on automaticallywhen required. No additional heatsinks or fans are needed.Features• 0-10VDC Control Input • 72KW and 105KW Models• PWM Control • Auto Reset Over Temperature• Three Phase Protection• 24VAC / DC Powered • Alarm Output• LED Indication • Small Footprint
Part Number
AX-PPR3-72
AX-PPR3-105
NOTE: LARGER SIZES AVAILABLE ON REQUEST
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 37
38
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
ACL1 / AC1 / AC3 Range of Thyristors - Electric Heater ControlsDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
AC RANGE OF THYRISTORSHeat & Combustion’s range of solid state AC controllers aredesigned to operate single and three phase (3 wire) resistiveloads using the burst-pulse principle.
Features• All solid state design using thyristor modules or SSRS• Normal line voltage 240V or 415VAC• Single and two arm control of load circuit (3 arm available onrequest)
• Input signal 0-10V as standard optional 4-20MA, 0-5V or5-10V
• CE compliant• Semi-conductor fuse protection - single phase9KW and above, three phase 28KW and above
• All ratings are at 40 ambient air• Enclosures IP10
PartNumber
SupplyPhase
MaxCurrentAMP
MaxHeatingDuty KW
Dimension(HxWxD)
ACL1 / 3.5 SINGLE 15 3.5 110x72x57
ACL1 / 7 SINGLE 30 7 210x136x116
AC1 / 9 SINGLE 38 9 210x136x112
AC1 / 15 SINGLE 63 15 210x136x112
AC1 / 28 SINGLE 117 28 210x154x152
ACL3 / 10 THREE 15 10 210x136x107
AC3 / 20N THREE 28 20 210x136x107
AC3 / 28 THREE 39 28 210x136x152
AC3 / 36 THREE 50 36 210x136x152
AC3 / 57 THREE 79 57 210x154x152
AC3 / 86 THREE 120 86 239x165x205
AC3 / 138 THREE 192 138 255x169x152
AC3 / 172 THREE 239 172 255x169x229
AC3 / 200 THREE 278 200 338x169x287
DIN RAIL AC3 / 12 - AC3 / 18Heat & Combustion range of Din Rail mounting thyristor powercontrollers are designed for the control of inductive loads inelectric furnaces, and heater batteries in HVAC systems. TheAC3 series, like all Heat & Combustion controllers uses zerocrossover switching, and burst pulse control ensures the loadis switched only in multiples of complete mains cycles thuskeeping supply and electrical disturbance to a minimum.
Features• 0 - 10V Input Control• Self Powered• 12KW Output• Din Rail (TS35) Mounting• PWM Control• Three Phase
PartNumber
SupplyPhase
Max HeatingDuty KW
AC3 / 12 THREE 12
AC3 / 18 THREE 18
NOTES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 38
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
39
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Liquid Differential Switches
FD113FD113 uses the pressure differential between the 2 inputs tooperate an electrical switch. For application in refrigerationpumps, air-conditioning HVAC systems according to EN378.e.g. Compressor oil pressure control. Pump pressure.
Features• Range: 0.2 to 4 BAR• Pressure connection: 1⁄4” bsp female• Protection: IP30• Switch rating: 5 AMP at 230VAC
Part Number
FD113
H1382PThis range of differential pressure switches are used to monitorthe difference in two pressures. For example they can be used tomonitor filter, boiler and pump condition and signal when theflow or pressure from these fall or rise to an alarm condition. Forall applications where air, oil or water is to be monitored.
Features• Five standard pressure ranges• Diaphragm operated• Fully adjustable• Pressure connections 1⁄8” bsp parallel female brass• C/W plug and socket• CE marked• Complete with mounting bracket• Enclosure rating IP65• Weight 0.9KGS• Switch rating, 5 AMP at 230VAC
Part Number Range
H1382P 15-250 MBAR
H1382P 0.07-1 BAR
H1382P 0.2-4 BAR
H1382P 0.5-11 BAR
H1382P 2-28 BAR
ACCESSORIES FOR H1382P2 x 1⁄8” & 2 x ¼” fittings C/W 2mtr ¼” copper tube.
Part Number
H1382P KIT
SPARE FITTINGS (1⁄8” or ¼”)
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 39
40
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Typical General Arrangement of Internal Boiler Roomwith Complete Gas Safety Installation
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
1. GS300M 3 Zone central controller2. CO100A Carbon Monoxide sensor3. SGM595 Natural Gas sensor4. ETL Thermal fusible link (72°C)5. AF126 Audible and visual alarm beacon6. Solenoid operated isolation valve7. KOB Emergency Stop Push button
Gas Sensor PlacementsNatural Gas - 300mm from ceilingLPG - 300mm from �oorCarbon monoxide (CO) - 1600mm from �oor
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 40
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
41
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Detection
Part Number Range
GS100M SINGLE SENSOR
GS300M UP TO 3 SENSORS
GS100M / GS300M GAS DETECTORDuomo is recognised within the gas industry for providing acomprehensive range of low cost, high reliability gas detectionfor many applications.We have installed and commissionednatural gas and carbon monoxide sensors in applications such asboiler rooms, kitchens, car parks, aircraft hangers, factories andshopping centres. The GS100M / GS300M is the commandcentre for the complete range of Duomo gas sensors. All Duomoproducts are manufactured to meet relevant EuropeanNormatives and proposals for explosive and toxic gases.
Features
• Microprocessor control • Wall or panel mounted• 1,2 or 3 zone protection • 4 - 20MA signal input• Measuring range 0-20% • EN50194 for explosive gasesL.E.L. / 0-300ppm • EN50291 for toxic gases
• IP44 protective rating • 3 year guarantee• Power supply 240VAC • 12VDC Battery Back up• Compatible sensors SG500(IP30),SGM595(IP55) or C0100AR, SGM595-LPG,HCF100, CO200 Duct, CO233A.
Part Number
GAS CANNISTER (12 LITRE)
LPG GAS CANNISTER (12 LITRE)
CO CANNISTER (12 LITRE)
REUSABLE VALVE FOR ABOVE
NOTE: MULTI CHANNEL VERSIONS AND OTHER GASESAVAILABLE ON REQUEST (IE. REFRIGERANTS,
OXYGEN, CHLORINE ETC.)
BX150 INDUSTRIAL GAS DETECTOR Panel Mounting only Duomo is recognised in the gas industry for providing acomprehensive range of low cost, high reliability gas detectionsystems for many applications. We have installed andcommissioned natural gas and carbon monoxide sensors inboiler rooms, kitchens, car parks, aircraft hangers, factories andshopping centres. The BX150 has been designed to meet allEuropean Normative proposals for natural gas, L.P.G. and carbonmonoxide gas detectors.
Features
• Detects carbon monoxide, natural gas and L.P.G.
• Single zone
• Catalytic and electrochemical sensors
• Audible alarm
• 230V and 12VDC
• Battery Back up
• Sensor fault relay output
• Panel mounting
• 96 x 48mm Din enclosure
• Manual test function
• Self diagnostic
• 3 year guarantee
• Compatible sensors SG500(IP30),SGM595(IP55) or C0100AR, SGM595-LPG,HCF100, CO200 Duct, CO233A.
Part Number
BX150
ACCESSORIES FOR GS100M / GS300MPlease note: Due to new legislation we areunable to send gasbottles/hazardous gases by ournormal carrier. Therefore thesecan only be sent via adesignated carrier. Carriagecharge extra at cost,dependent on postcode.Contact Heat & Combustion fordetails.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 41
42
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Gas DetectionDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
BX444 GAS DETECTORDuomo is recognised within the gas industry for providing acomprehensive range of low cost, high reliability gas detectionfor many applications.We have installed and commissionednatural gas and carbon monoxide sensors in applications such asboiler rooms, kitchens, car parks, aircraft hangers, factories andshopping centres. The BX444 is the command centre for thecomplete range of Duomo gas sensors. All Duomo products aremanufactured to meet relevant European Normatives andproposals for explosive and toxic gases.
Features
• Digital display
• Microprocessor control
• Wall or panel mounted
• 4 zone protection
• 4-20MA signal input
• Measuring range 0-20% L.E.L. / 0-300ppm
• IP44 protective rating
• EN50194 for explosive gases
• EN50291 for toxic gases
• 3 year guarantee
• Power supply 230VAC-12VDC Battery Back up
• Compatible sensors SG500(IP30),SGM595(IP55) or C0100AR, SGM595-LPG,HCF100, CO200 Duct, CO233A.
Part Number
BX444
BX216 GAS DETECTORDuomo is recognised within the gas industry for providing acomprehensive range of low cost, high reliability gas detectionfor many applications.We have installed and commissionednatural gas and carbon monoxide sensors in applications such asboiler rooms, kitchens, car parks, aircraft hangers, factories andshopping centres.The BX216 is the command centre for thecomplete range of Duomo gas sensors. All Duomo products aremanufactured to meet relevant European Normatives andproposals for explosive and toxic gases.
Features
• Microprocessor control
• Wall mounted
• 16 sensor protection (across 1-2 zones)
• 4-20MA signal input
• Measuring range 0-20% L.E.L. / 0-300ppm
• IP55 protective rating
• EN50194 for explosive gases
• EN50291 for toxic gases
• 3 year guarantee
• Power supply 230VAC-12VDC Battery Back up
• Compatible sensors SG500(IP30),SGM595(IP55) or C0100AR, SGM595-LPG,HCF100, CO200 Duct, CO233A.
Part Number
BX216
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 42
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
43
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Detection
SGM595 SENSOR (NATURAL GAS)IP55 natural gas AUTO CALIBRATING for use with BX150,GS100M, GS300M, BX216 and BX444 controllers.
Part Number
SGM595
SG500 SENSOR (NATURAL GAS)IP30 natural gas for use with BX150, GS100M, GS300M, BX216and BX444 controllers.
Part Number
SG500
SGM595-LPG SENSOR (LPG PROPANE)IP55 LPG gas AUTO CALIBRATING for use with BX150,GS100M, GS300M, BX216 and BX444 controllers.
Part Number
SGM595-LPG
CO100AR SENSOR (CARBON MONOXIDE)IP55 carbon monoxide for use with BX150, GS100M, GS300M,BX216 and BX444 controllers. Relay and 4-20MA output.
Part Number
CO100AR
CO200 / DUCT SENSOR (CARBON MONOXIDE)IP55 carbon monoxide (as above CO100AR) but duct mounting.
Part Number
CO200 / DUCT
Please note: On an after sales service, Heat &Combustion in conjunction with Duomo (UK) canoffer a full after sales commissioning facility forits range of Gas Detection - please contact Heat& Combustion for details.
Tel: (029) 20 463345Email: [email protected]
www.heatcombustion.co.uk
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 43
44
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Gas DetectionDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
HCF100 SENSOR (FREON)Toxic - refrigerant freon R134A for use with BX150, GS100M,GS300M, BX444 and BX216 controllers. Can be configured forother gases.
Part Number
HCF100
Part Number
AF126
CHCO DETECTORThe CHCO is a dual sensor, methane and carbon monoxidedetector. When methane and / or carbon monoxide are sensed thedetector sounds an on board audible alarm and changes over avolt free contact relating to the type of gas sensed. These volt freerelays can be used to isolate the electrical supply to gas solenoidvalves or give a remote indication of an alarm. The alarmthreshold for methane is 20% L.E.L. and for carbon monoxide is300ppm. The CHCO also has a seperate carbon monoxide relayalarm facility which gives a relay output at 30-50-100ppm ofcarbon monoxide based on time weightedaverage function. Features• Microprocessor control• Detects carbon monoxide andmethane
• 230V supply• Methane alarm relay SPDT• Carbon monoxide relay SPDT• Catalytic sensor for methane• Electrochemical sensor for carbonmonoxide
• Sensor active indicator• EN50291 for toxic gas• EN50194 for explosive gas
Part Number
CHCO
GS920 LPG METHANE/LPG GAS SENSOR(with seismetic cut off)The GS920 is a methane/LPG sensor with anintegrated seismetic detector that will shut off agas valve in the advent os seismetic activity.With a built in relay the GS920 can be used to shut off a gas valvein the event of a leak, or operate remote sirens and beacons toalert those of a hazard.
Part Number
GS920 LPG
AF126Audible Flashing Alarm. 230VAC supply IP54 protection. theunit is BS5839 Part 1 compliant, has a two stage alarm, over 30different selectable alarm tones and has full volume control.
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 44
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
45
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Detection Gas Safestart
CATALYTIC CO233A & CO100A SENSOR (STAND ALONE UNIT)Duomo is recognised within the gas industry for providing acomprehensive range of low cost, high reliability gas detectionfor many applications. We have installed and commissionednatural gas and carbon monoxide sensors in applications suchas boiler rooms, kitchens, car parks, aircraft hangers, factoriesand shopping centres. The CO233A is an electronic safety andprotection device. The electrochemical sensor technologyprovides specific detection of carbon monoxide. Ruggedconstruction and IP55 protective rating make this unit ideal fordamp conditions such as boiler rooms. The CO233A is ideal foroccupied areas where the concentrations of carbon monoxideneed to be monitored, for example storage rooms adjacent toboiler rooms. The CO233A can be connected to the BX444M,GS300M, GS100M, BX216 and BX150 controllers or directlyback to a BMS system (note: the safety function of the system isthen the responsibility of the application engineer).There are two 4-20MA outputs. The first is a linear outputproportional to the levels of carbon monoxide in the protectedarea. The second is an off/on 4-20MA output which is triggeredby the onboard microprocessor when the average levels ofcarbon monoxide exceed the predetermined thresholds overspecified periods e.g. a 30ppm average for 2 hours will causethe CO233A to give a 20MA output from terminal 4. There arealso voltfree changeover relays for sensor fault, CO level alarmat 300ppm and time weighted average alarm.Note: CO100A - As CO233A but without display.
Features
• 12-24VDCsupply
• Digital display (ppm)• IP55 protective rating• IP65 sintered head• Electrochemical sensor technology• 4-20MA linear output and on / off TWA• CE certified No. 040029• EN50291 for toxic gas• 3 year guarantee
Part Number Description
C0 233A CATALYTIC CO SENSOR C/WDIGITAL DISPLAY SUITABLE FOR CAR PARKS ETC.
C0100AR AS ABOVE WITHOUT DISPLAY
G161 GAS SAFESTARTThe G161 Safestart is a pipework intergity system for kitchensand laboratories that checks all downstream pipework is securebefore initiating the gas supply.British Standard BS6173:2009 Specification for installation andmaintenance of gas-fired catering appliances for use in all typesof catering establishments (2nd and 3rd family gases)."Where the open burners of a new appliance are not fitted with aflame supervision device the gas supply shall be fitted with aproving system to prove the closure of all valves prior to theestablishment or restoration of the gas supply." In accordancewith these requirements, the Duomo Safestart system securelyisolates and by checking the integrity of the downstream pipework safely re-establishes the gas supply to any area which relieson manual isolation of gas outlets (e.g. in hotels, fast foodrestaurants, schools, colleges and canteens).
Features• Pipework integrity system forkitchens and laboratories
• Simple to install and easy to operate
• Available from 1⁄2" BSP to 3" flanged
• Valve assembly is pressure tested and certified
• 230 Volt supply
• Up to 50 mbar inlet pressure
• Suitable for Natural Gas and LPG
• Compatible with KS22-V6 and KS23-V6
• IGEM/UP/11 - Gas Installations foreducational establishments compliant
Part Number
G161 1⁄2”+ KS22 TRIO V6 (OR KS23 V6)
G161 3⁄4”+ KS22 TRIO V6 (OR KS23 V6)
G161 1”+ KS22 TRIO V6 (OR KS23 V6)
G161 11⁄4”+ KS22 TRIO V6 (OR KS23 V6)
G161 11⁄2”+ KS22 TRIO V6 (OR KS23 V6)
G161 2”+ KS22 TRIO V6 (OR KS23 V6)
G161 21⁄2”FL + KS22 TRIO V6 (OR KS23 V6)
G161 3”FL + KS22 TRIO V6 (OR KS23 V6)
KS22 V6(Kitchen) or
KS23 V6(Laboratories)
(Default Code 167)
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 45
46
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Gas SafestartDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
G621 GAS SAFESTARTThe G621 Safestart is a weep proving system for kitchens andlaboratories that checks all downstream pipework is securebefore initiating the gas supply. IGEM/UP/2 Edition 2 Installation pipework on industrial andcommercial premises. “Prior to light-up of manually operatedplant, it is essential to ensure that all manual valves on burnersor appliances are in the closed position. This can be performedby permitting a small, and controlled, flow of gas through alimiting orifice to by-pass the SSOVs. If any of the downstreamvalves are not closed, the pipework will not pressurise and, thus,the circuitry will prohibit the opening of the SSOVs.”
Features• Weep proving system for kitchens and laboratories
• IGE / UP / 2 Edition 2 compliant
• Simple to install and easy to operate
• Available from 1⁄2" BSP to 4" flanged
• Valve assembly is pre-wired, pressure tested and certified
• 230V supply
• Up to 50 mbar inlet pressure
• Suitable for natural gas or L.P.G
• Union or compression connections
• Compatible with KS22 and KS23
Part Number
G621 1⁄2”+ TRIO KS22 (OR KS23 LABSTART)
G621 3⁄4”+ TRIO KS22 (OR KS23 LABSTART)
G621 1”+ TRIO KS22 (OR KS23 LABSTART)
G621 11⁄4”+ TRIO KS22 (OR KS23 LABSTART)
G621 11⁄2”+ TRIO KS22 (OR KS23 LABSTART)
G621 2”+ TRIO KS22 (OR KS23 LABSTART)
G621 21⁄2”+ TRIO KS22 (OR KS23 LABSTART)
G621 3”+ TRIO KS22 (OR KS23 LABSTART)
G621 4”+ TRIO KS22 (OR KS23 LABSTART)
CONTROL PANELSThe G621 is supplied as a complete kit with a control panel;either the KS22 or KS23. It is important to recognise thedifferences between these when ordering a G621, to get the mostappropriate control panel for your application.
KS22 (TRIO) The KS22 Trio Safestart controller is foruse in kitchens. It has a unique touchcontrol pad which is backlit for operationin dark environments. To start theproving system, the user must enter apassword, programmable by the user atthe time of set up.The proving sequencewill then begin, and should it fail, theKS22 will display the type of failure(either air or gas) visually.
KS23The KS23 TRIO Labstart controller is for use inscience laboratories, to control the flow of bothgas and water. As with the KS22, it features aunique touch control pad. It also allowsthe isolation of individual services (i.e.power, water and gas) thereforeallowing the user to initiate only thoseservices required into the laboratory.Both the KS22 and KS23 have a powersaving function to reduce energy costs.The timed power off can be selected atsetup during the programming stage.All features (including passwordselection) for setup are detailed step-by-step in the datasheets supplied withthese controllers.
(DEFAULT CODE 167)
(DEFAULT CODE 167)
KS20 CATERING KITCHEN VENTILATION INTERLOCKCONTROLLERFor use in commercial kitchens where all gas appliances haveexisting flame safeguards. The Duomo KS20 catering kitchenventilation interlockcontroller monitorsmechanicalventilation operation& efficiency incommercial cateringestablishments, i.e.hotels, restaurants,school kitchens,canteens etc.
Part Number
KS20
(DEFAULTCODE 167)
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 46
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
47
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
CO2 Detection
‘E’ SENSE - TR VERSIONA simple low-cost state-of-the-art infrared and maintenancefree, carbon dioxide transmitter for installation in space areasC/W temperature bead 10K3A1 supplied as standard. Optionalbeads available at an additional cost (i.e.: Siemens / Cylon /Satchwell / TAC / Andover etc). IP30 rated. Measures CO2concentration in the air up to 2000ppm and transforms into ananalogue 0-10V output signal or 4-20MA. Temperature controlvia thermistor bead.
Part Number
‘E’ SENSE ROOM-TR
‘E’ SENSE ROOM-TR
‘E’ SENSE ROOM - WITH DISPLAYA simple CO2 room sensor (no temperature connector) with adigital display. IP30 rated
Part Number
‘E’ SENSE ROOM-D
‘E’ SENSEDUCTA simple low-cost CO2 ductsensor (notemperatureconnector).IP65 rated.
Part Number
CO2-MC 230V
CO2-MC 230V
CO2-MC 24V
CO2-MC REMOTEPROGRAMMING TOOL
Part Number
‘E’ SENSE DUCT
‘A’ SENSE ‘A’ Sense similar to ‘E’ version other than it is both 0-10V or 4-20MA outputs option for both carbon dioxide and temperaturein the ambient air, it transforms the data into output signals andsends these values to a compression BMS system. IP30 wallhousing, IP65 duct housing.NB: Room version now supplied with Relay output (RL) asstandard
Part Number
‘A’ SENSE ROOM
‘A’ SENSE DUCT
NOTE:‘A’ SENSE - SAME PRODUCT AS SUPPLIED BY TREND
MODBUS VERSION AVAILABLE
CO2 MONITOR & CONTROLLERThe Duomo CO2-MC is designed to monitor and control thelevel of CO2 as well as displaying room temperature andhumidity, in applications such as offices, kitchens andclassrooms (advise when ordering).Options AvailableA) 230V Relay (230V Relay Out)B) 24VAC /DC (VFC)All with Audible Alarm & 3 Colour Backlight (Traffic lightdisplay). Supplied Factory Preset. Programming Tool available(below), if required, to change at a later date.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 47
48
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
CO2 DetectionDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Part Number
E-SENSE - FA1
E-SENSE - FA1
TLD1-CO2 0-10VThe 0-10V version CO2 controller 24VAC / DC complete with 2x 0-10VDC or 2-10VDC analogue outputs for CO2 andtemperature (selectable jumper) comes with RS485 interfaceand modbus protocol. Wall mounting for easy use at airports,train stations, shopping centres, classrooms labs and kitchens.Three colour LCD back light indicating ventilation requirementsbased on CO2 measurements, also displaying temperature andhumidity. Humidity is display only not control.
THE NEW T-SENSE VERSION OUT SOONAvailable in two versions, with touch screen display or without. A 3 in 1transmitter measuring CO2, temperature and humidity, with colourtouch display actual levels displayed for the last 24 hours and 7 days ina graphical display.Contact Heat & Combustion for details and prices.
Part Number
TLD1-CO2 TT MOD
E-SENSE - FA1The three LED CO2 transmitter is a new simplelow cost state of the art infrared CO2transmitter for installations in classrooms andoffices.Green 0-800ppmYellow 800-1400ppmRed 1400 ppm and above• Audible Alarm• Mute Button• Power Supply 24VAC/DC• Output 0-10VDC
NEWPRODUCT
NEWPRODUCT
COMINGSOON
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 48
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
49
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Nenutec 2 Way Motorised Ball Valves
Valve Part Number Description
NVCB72015 ½” 2 PORT VALVE
NVCB72020 ¾” 2 PORT VALVE
NVCB72025 1” 2 PORT VALVE
NVCB72032 1¼” 2 PORT VALVE
NVCB72040 1½” 2 PORT VALVE
NVCB72050 2” 2 PORT VALVE
Motors to suit standard 5NM for valves 1⁄2”-3⁄4”
NEBA 24-05 24VAC 5NM
NEBA 24-05 S1 24VAC C/W SWITCH 5NM
NEBA 230-05 230V 5NM
NEBA 230-05 S1 230V C/W SWITCH 5NM
NEBM 24.2-05 24VAC 0-10V 5NM
Motors to suit standard10NM for valves 1”-2”
NEBA 24-10 24VAC 10NM
NEBA 24-10 S1 24VAC C/W SWITCH 10NM
NEBA 230-10 230VAC 10NM
NEBA 230-10 S1 230V C/W SWITCH 10NM
NEBM 24.1-10 24VAC 0-10V 10NM
NEBM 24.1-10 S1 24VAC 0-10V C/W SWITCH 10NM
1/2”-2” SCREWEDThe Nenutec quality range of 2 way female connection ball valves,forged brass, C/W fixed mounting bracket for coupling direct toNenutec motor. 5NM / 10MN version or EFS Electrical Fail Safe orSpring Return versions.
Features• Body - forged brass• Valves used in the HVAC system to regulate the flow of water• Complete range from DN15 to DN50• Low leakage factor of up to 0.01%• High close off pressure actuator satisfies demandingrequirements of high rise buildings and high pressure pumpingsystems.
• PN40 or 580PSI system operating pressure• Equal percentage flow characteristic• Media temperature -5 to +121°C water.
EFS (Electronic Fail Safe) Motors to suit valves 1⁄2”-3⁄4”
FSBA24-05 24VAC 5NM
FSBA230-05 230VAC 5NM
FSBM 24-2-05 240-10V 5NM
EFS (Electronic Fail Safe) Motors to suit valves 1”-2”
LINK-NAF LINKAGE (RQD FOR FAILSAFE 1”-2” ONLY)
FSAA24-08 24VAC 8NM
FSAA24-08S 24VAC 8NM C/W SWITCH
FSAA230-08 230VAC 8NM
FSAA230-08S 230VAC 8NM C/W SWITCH
FSAM24-2-08 24V 0-10V 8NM
FSAM24-2-08S 24V 0-10V 8NM C/W SWITCH
Spring return motor option
LINK - NAF LINKAGE (REQUIRED IF SPRINGRETURN MOTOR FITTED)
5NM motor for up to 3⁄4” valve spring return option
NESA 24-05 24VAC 5NM
NESA 24-05 S1 24VAC C/W SWITCH 5NM
NESA 230-05 230V 5NM
NESA 230-05 S1 230V C/W SWITCH 5NM
8NM motor for 1”-2” valve spring return option
NESA 24-08 24VAC 8NM
NESA 24-08 S1 24VAC C/W SWITCH 8NM
NESA 230-08 230V 8NM
NESA 230-08 S1 230V C/W SWITCH 8NM
NESM 24.1-08 24VAC 0-10V 8NM(FOR ALL SIZES)
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 49
50
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Nenutec Range of 3 Way CharacterisedBall Valve (0-10V as standard)
2 / 3 Way NVMZ series of Motorised Zone Valves
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
NENUTEC RANGE OF 3 WAY CHARACTERISED BALLVALVES SIZES 1/2”-2” BSPSCREWEDThe Nenutec range of 3 portcharacterised ball valves,forged brass C/W fixedmounting bracket forcoupling direct to Nenutecmotor 5NM and 10NM or EFS(Electronic Fail Safe) or SpringReturn versions. Characterisedinsert which gives KV’s similarto globe valves. Superiorrangeability and equalpercentage flowcharacteristic.Features• Body - forged brass• Valves used in the HVACsystem to regulate the flow of water
• Complete range from DN15 to DN50• Low leakage factor of up to 0.01%• High close off pressure actuator satisfies demandingrequirements of high rise buildings and high pressurepumping systems.
• PN40 or 580PSI system operating pressure• Equal percentage flow characteristic• Media temperature -5 to +121°C water
Valve Part Number KV Bypass KV
NVCB73015-BE 1⁄2” 4.0 2.5
NVCB73020-BE 3⁄4” 6.3 4.0
NVCB73025-BE 1” 10.0 6.3
NVCB73032-BE 11⁄4” 16 10
NVCB73040-BE 11⁄2” 25 16
NVCB73050-BE 2” 40 25
Motors to suit standard valves 1⁄2” -3⁄4” 0-10V
NEBM 24.2-05 24V 0-10V 5NM
Motors to suit standard valves 1” - 2” 0-10V
NEBM 24.1-10 24V 0-10V 10NM
EFS (Electronic Fail Safe) motors to suit valves 1⁄2” -3⁄4” 0-10V
FSBM 24-2.05 24VAC 5NM
NB: 3 WAY VALVES ARE NORMALLY SUPPLIED WITH 0-10V MOTORS, HOWEVER IF 24V OR 230V REQUIRED
SEE TABLE SHOWN ON 2 WAY VALVES ON PG 49
NESM24-1-08 24V 0-10V (8NM FOR ALL SIZES)
FSAM 24-2.08 24V 0-10V 8NM
FSAM 24-2.08 S 24V 0-10V 8NM WITH SWITCH
EFS (Electronic Fail Safe) motors to suit valves 1”-2” 0-10V
LINK - NAF LINKAGE (REQ FOR FAIL SAFE 1”-2” ONLY)
Spring Return Motor Options
LINK - NAF LINKAGE (REQUIRED IF SPRING RETURNMOTOR FITTED)
NVMZ SERIESThe Nenutec range of NVMZ Zone Valves are especiallydesigned and produced for HVAC systems. 2 and 3-Wayversions 24VAC and 240V versions sizes 1⁄2”-1”.
3 WAY
Part Number Description
NVMZ 3015 1⁄2” DN15 KVS 1.6 C/W 230V OR24VAC ACTUATOR
NVMZ 3020 3⁄4” DN20 KVS 3.5 C/W 230V OR24VAC ACTUATOR
NVMZ 3025 1” DN25 KVS 5.5 C/W 230V OR24VAC ACTUATOR
B1 24VAC SPARE ACTUATOR
B2 240V SPARE ACUATOR
2 WAY
Part Number Description
NVMZ 2015 1⁄2” DN15 KVS 1.6 C/W 230V OR24VAC ACTUATOR
NVMZ 2020 3⁄4” DN20 KVS 3.5 C/W 230V OR24VAC ACTUATOR
NVMZ 2025 1” DN25 KVS 5.5 C/W 230V OR24VAC ACTUATOR
B1 24VAC SPARE ACTUATOR
B2 240V SPARE ACUATOR
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 50
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
51
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Domestic ‘ZV’ Spring ReturnMotorised Zone Valves
Danfoss 2/3 Way Range of Motorised Ball Valves
DANFOSS 2/3 WAY RANGE OF MOTORISED BALL VALVESAvailable in 230V or 24VAC in sizes DN15-50 (2 port) orDN15-25 (3 port). These valves are for use as zone isolation in2 port or as full flow diverter valves in 3 port configuration.They have high flow rates, low pressure drops and are sold ascomplete valve and actuator, already assembled.The on / off zone valve type AMZ112 and 113 are typicallyused in connection with:
• Domestic and commercial central heating applications• Domestic hot water applications• Solar energy plants• Priority control of hot water supply and heating (divertingfunction)
• Priority control of boiler and solid fuel installations (divertingfunction).
New Part No. Description Old Part No.
230V 2-PORT VALVES
082G540600 AMZ 112 230V DN15 1⁄2” 082G550100
082G540700 AMZ 112 230V DN20 3⁄4” 082G550200
082G540800 AMZ 112 230V DN25 1” 082G550300
082G540900 AMZ 112 230V DN32 11⁄4” 082G551400
082G541000 AMZ 112 230V DN40 11⁄2” 082G551500
082G541100 AMZ 112 230V DN50 2” 082G551600
230V 3-PORT VALVES
082G541800 AMZ 113 230V DN15 1⁄2” 082G551100
082G541900 AMZ 113 230V DN20 3⁄4” 082G551200
082G542000 AMZ 113 230V DN25 1” 082G551300
24VAC 2-PORT VALVES
082G54000 AMZ 112 24VAC DN15 1⁄2” 082G552000
082G540100 AMZ 112 24VAC DN20 3⁄4” 082G552100
082G540200 AMZ 112 24VAC DN25 1” 082G552200
082G540300 AMZ 112 24VAC DN32 11⁄4” 082G552300
082G540400 AMZ 112 24VAC DN40 11⁄2” 082G552400
082G540500 AMZ 112 24VAC DN50 2” 082G552500
24V 3-PORT VALVES
082G541200 AMZ 113 24VAC DN15 1⁄2” 082G552600
082G541300 AMZ 113 24VAC DN20 3⁄4” 082G552700
082G541400 AMZ 113 24VAC DN25 1” 082G552800
DOMESTIC MOTORISED VALVESThe ZV range of domestic 2 / 3 port spring return motorisedvalves for domestic applications. 2 port versions C/W Auxswitch as standard.
2 PORT 240V
Part Number Size
ZV1⁄2” 1⁄2”
ZV15 15MM
ZV3⁄4” 3⁄4”
ZV22 22MM
ZV1” 1”
ZV28 28MM
3 PORT 240V
Part Number Size
ZVD1⁄2” 1⁄2”
ZVD15 15MM
ZVD3⁄4” 3⁄4”
ZVD22 22MM
ZVD1” 1”
ZVD28 28MM
24V = + 10% EXTRA COST AVAILABLE ON REQUEST
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 51
52
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Danfoss Fan Coil ValvesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
DANFOSS FAN COIL VALVESThe Danfoss Fan Coil Valve available in 2 and 4 way versions C/W either 24VAC, 230V raised / lower Actuator or0-10V modulating option.
SAME AS PREVIOUSLY USED BY TREND
Use with AMV / AME 130 motors• Valve supplied without fittings• Nominal Pressure PN16• Flow characteristic Linear• Mixing characteristic Linear• Medium temperature 2 to 120°C• Control ratio Minimum 30:1• Leakage loss, closed valve A-AB≤0.05% of KVS
B - AB ≤ 1% of KVS• Thread connection External thread-Compression• Stroke 2.8mm• Material: Body Brass• Material: Stem Brass• Material: Seat cone Brass
Motor Features• Technical data AMV 130 230V / 24VAC• Supply voltage 24VAC, 230VAC +10 to -15%• Frequency 50/60Hz• Consumption 1 VA (24VAC), 8 VA (230VAC)• Power output 200 N• Spindle travel 5.5mm• Spindle speed 24 s/mm (AMV 130)• Grade of enclosure IP42• Medium temperature in pipe 2 to 120°C• Ambient temperature 0 to 55°C
• Technical data AME 130 (Modulating)• Supply voltage 24VAC, +10 to -15%• Frequency 50 / 60Hz• Consumption 1.3 VA• Power output 200 N• Spindle travel 5.5mm• Spindle speed 24 s/mm (AME 130)• Grade of enclosure IP42• Medium temperature in pipe 2 to 120°C• Ambient temperature 0 to 55°C
TWO-WAY VALVES
Code No. Type DN(mm)
Kvs(m3/h)
Max p(bar)
065Z204000 VZL 2 DN 15 15 0.25 2.5
065Z204100 VZL 2 DN 15 15 0.40 2.5
065Z204200 VZL 2 DN 15 15 0.63 2.5
065Z204300 VZL 2 DN 15 15 1.0 2.0
065Z204400 VZL 2 DN 15 15 1.6 2.0
065Z204500 VZL 2 DN 20 20 2.5 1.0
065Z204600 VZL 2 DN 20 20 3.5 1.0
FOUR-WAY VALVES
Code No. Type Kvs(A-AB)(m3/h
Kvs(B-AB)(m3/h)
Max p(bar)
065Z206000 VZL 4 DN 15 0.25 0.25 2.5
065Z206100 VZL 4 DN 15 0.40 0.25 2.5
065Z206200 VZL 4 DN 15 0.63 0.40 2.5
065Z206300 VZL 4 DN 15 1.0 0.63 2.0
065Z206400 VZL 4 DN 15 1.6 1.0 2.0
065Z206500 VZL 4 DN 20 2.5 1.6 1.0
065Z206600 VZL 4 DN 20 3.5 2.5 1.0
Code No. Type SupplyVoltage
VAC
SpindleSpeed(s/mm)
Stroke(mm)
Weight(kg)
082H803600 AMV 130 24 24 5.5 0.4
082H803700 AMV 130 230 24 5.5 0.4
082H804400 AME 130 24(0-10V)
24 5.5 0.4
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 52
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
53
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Danfoss 2 & 3 Way Lift and Lay Valves 1⁄2” - 2” Screwed Version
DANFOSS 2 & 3 WAY LIFT AND LAY VALVES 1⁄2” - 2” SCREWED VERSIONS• Plant valves for 15-50mm, used with 3-point, modulating and spring return plant actuators
• Direct connection to BSP pipework without the need for couplings
• New quick connection between the valve and the actuator
• Made of RG5 Bronze to eliminate erosion.
SAME AS PREVIOUSLY USED BY TREND
VRB TWO-WAY VALVES - INTERNAL THREAD
Part No. TypeVRB2
DN(mm)
Kvs(m3/h)
Stroke(mm)
Weight(kg)
065Z023100 15 / 0.63 int. 15 0.63 10 0.6
065Z023200 15 / 1.0 int. 15 1.0 10 0.6
065Z023300 15 / 1.6 int. 15 1.6 10 0.6
065Z023400 15 / 2.5 int. 15 2.5 10 0.6
065Z023500 15 / 4.0 int. 15 4.0 10 0.6
065Z023600 20 / 6.3 int. 20 6.3 10 0.77
065Z023700 25 / 10 int. 25 10 10 0.98
065Z023800 32 / 16 int. 32 16 15 1.43
065Z023900 40 / 25 int. 40 25 15 2.54
065Z024000 50 / 40 int. 50 40 15 3.496
VRB THREE-WAY VALVES - INTERNAL THREAD
Part No. TypeVRB3
DN(mm)
Kvs(m3/h)
Stroke(mm)
Weight(kg)
065Z021100 15 / 0.63 int. 15 0.63 10 0.71
065Z021200 15 / 1.0 int. 15 1.0 10 0.71
065Z021300 15 / 1.6 int. 15 1.6 10 0.71
065Z021400 15 / 2.5 int. 15 2.5 10 0.71
065Z021500 15 / 4.0 int. 15 4.0 10 0.71
065Z021600 20 / 6.3 int. 20 6.3 10 0.91
065Z021700 25 / 10 int. 25 10 10 1.15
065Z021800 32 / 16 int. 32 16 15 1.81
065Z021900 40 / 25 int. 40 25 15 3.35
065Z022000 50 / 40 int. 50 40 15 5.13
Use with AMV/AME 435 or AMV/AME438• Technical data• Nominal size DN15 to DN50• Control characteristics LOG: port A-AB; LIN: port B-AB• Cavitation Factor z ≥0.4• Leakage acc. to standard IEC534 A-AB≤ 0.05% of KVS
B - AB ≤ 1% of KVS• Nominal Pressure PN16• Maximum Closing Pressure 4 BAR• Medium Circulation water / glycolic
water up to 50%
• Medium pH Min. 7, Max. 10• Medium temperature 2 (-10) to 120°C• Material: Valve Body Red bronze CuSu5ZN5Pb5 (Rg5)• Material: Valve Stem Stainless steel• Material: Valve cone Brass• Material: Stuffing Box Sealing EPDM
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:19 Page 53
Danfoss 2 & 3 Way Flanged Lift and Lay Valves54
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
DANFOSS 2 & 3 WAY FLANGED LIFT AND LAY VALVES 21⁄2” (65MM) - 12” (300MM) FL. PN16• PN16 valves in 65mm-300mm for use with 3-point, modulating and spring return plant actuators
• Made with cast iron body, stainless steel spindle and brass plug
• Can be used with glycol concentrations of up to 50%
• Stem heaters available for temperatures down to -10°C
SAME AS PREVIOUSLY USED BY TREND
Use with AMV/AME 435 or AMV/AME 438 for valve sizes up to 80mmUse with AMV/AME 55 for valve size 100mmUse with AMV/AME 85 for valve size 125 - 150mmUse with AMV 655 / AME 855 for valve size 200 - 300mmTechnical data• Nominal pressure PN16• Nominal size DN65 to DN250 (2 PORT) DN65-DN300 (3-PORT)• Kvs value 40-1,500m3/h• Flow characteristics LOG: port A-AB• Mixing characteristics LIN: port B-AB• Temperature Circulation water / glycolic water up to 50%
2 (-10) to 130°C (DN15-100)2 (-10) to 200°C (DN125-150)At temperatures from -10°C to +2°C use stem heater
• Leakage rate: Mixing way Maximum 1.0% of KVS• Flange connection Flange PN16 acc. to EN 1092-2• Compliance with Pressure Equipment Directive 97/23/EC
TWO-PORT VALVES
Part No. TypeVF2 (KV)
DN(mm)
Kvs(m3/h)
Stroke(mm)
065Z028100 65 / 63 65 63 20
065Z028200 80 / 100 80 100 20
065B320500 100 / 145 100 145 30
065B323000 125 / 220 125 220 40
065B325500 150 / 320 150 320 40
065B350500 200/630 200 630 70
065B350600 250/900 250 900 70
065B420000 200/630 200 630 70
065B425000 250/1000 250 1000 70
065B430000 300/1500 300 1500 80
THREE-PORT VALVES
Part No. TypeVF3 (KV)
DN(mm)
Kvs(m3/h)
Stroke(mm)
065Z026100 65 / 63 65 63 20
065Z026200 80 / 100 80 100 20
065B168500 100 / 145 100 145 30
065B312500 125 / 220 125 220 40
065B315000 150 / 320 150 320 40
NEWPRODUCT
NOW LARGERSIZES -
TWO-PORTNOW UP TO250MM
THREE-PORTNOW UP TO300MM
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 54
Danfoss Actuators to Suit VRB / VF Range of Valves
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
55
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
DANFOSS ACTUATORS TO SUIT VRB 2 / 3 WAY AND VF 2 / 3 WAY VALVES• 400N actuator for control of 15-80mm valves
• For use in 3-point control and modulating applications
• Standard or fast speed control built into the actuator
• Manual override
• Self stroking function
• Diagnostic LED viewable on the cover
• Standby function
• Intelligent anti-hunting feature
• Quick connection between the valve and the actuator
Use with VRB, VRG, VL and VF in sizes 15-80mmTechnical data
AME 435 Modulating• Power supply 24VAC / DC; ±10%• Power consumption 4.5VA• Frequency 50Hz / 60 Hz• Control input Y 0-10V (2-10V) Ri = 95 kΩ 0-20MA (4-20MA) Ri = 500 Ω• Output signal X 0-10V (2-10V) RL = 650 Ω (maximal load)• Close of force 400N• Max. stroke 20mm• Speed 7.5 s/mm or 15 s/mm• Max. medium temperature 130°C• Ambient temperature 0 to 55°C• Storage and transport temperature –40 to +70°C• Protection class II• Degree of protection IP54• Weight 0.45 kg• CE marking in accordance Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14with standards EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3
AMV 435 on - off• Power supply 24VAC / DC, 230VAC; +10 to –15%• Power consumption 2VA• Frequency 50Hz or 60Hz (for VAC power supply)• Control input 3 point• Close of force 400N• Max. stroke 20 mm• Speed 7.5 s/mm or 15 s/mm• Max. medium temperature 130°C• Ambient temperature 0 to 55°C• Storage and transport temperature –40 to +70°C• Protection class II• Degree of protection IP54• Weight 0.45KG• CE marking in accordance Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14with standards EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3
Part No. Type Description
082H016200 AMV 435 SUPPLY VOLTAGE: 24VAC / DC SPINDLE SPEED: 11S/MM SPINDLE STROKE: 15MM
082H016300 AMV 435 SUPPLY VOLTAGE: 230V SPINDLE SPEED: 11S/MM SPINDLE STROKE: 15MM
082H016100 AME 435 SUPPLY VOLTAGE: 24VAC / DC (0-10V) SPINDLE SPEED: 11S/MM SPINDLE STROKE: 15MM
065Z031300 ADAPTOR TO ENABLE NEW TYPE ACUATORS TO FIT ‘OLD’ STYLE VRG/VBG/VF AND VL SERIES VALVES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 55
56
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eDanfoss Actuators (For 100 - 300mm Valves)
DANFOSS ACTUATORS AMV / AME 55 AND AMV / AME 85• 2000N actuator, standard speed, for control of 100mm flanged plant valves• For use in 3-point control and modulating applications• Fast and standard speed stroking options available• Self-stroking function on modulating version• Diagnostic LED (AME)• Manual override• 5000N, at standard speed, actuator for control of flanged plant valve sizes 125mm and 150mm(AMV / E85)Use with VF valves AMV-55, AME-55 for 100mm valves. AMV-85, AME-85for 125-150mm valvesTechnical data
AMV (3-point control) AME (Modulating)• Supply voltage 24VAC, 230VAC +10% -15% 24VAC +10% -15%• Frequency 50Hz / 60 Hz 50Hz / 60 Hz• Consumption 7VA (AMV 55) 9VA, (AME 55)• Power output 2000N (AMV 55) 2000N (AMV 55)• Spindle travel 40mm 40mm• Spindle speed 8 s/mm (AMV 55) 8 s/mm (AMV 55)• Grade of enclosure IP54 IP54• Medium temperature in pipe 2 to 200°C 2 to 200°C• Ambient temperature 0 to 55°C 0 to 55°C
AMV (3-point control) AME (Modulating)• Supply voltage 24VAC, 230VAC +10% -15% 24VAC +10% -15%• Frequency 50Hz / 60 Hz 50Hz / 60 Hz• Consumption 10.5VA (AMV 85) 12.5VA, (AME 85)• Power output 5000N 5000N• Spindle travel 40mm 40mm• Spindle speed 8 s/mm (AMV 85) 8 s/mm (AMV 85)• Grade of enclosure IP54 IP54• Medium temperature in pipe 2 to 200°C 2 to 200°C• Ambient temperature -15 to +55°C -5 to +50°C
Part No. Type Supply Voltage Spindle Speed(s/mm)
Stroke(mm)
Weight(kg)
082H302000 AMV 55 24VAC 8 40 3
082H302100 AMV 55 230VAC 8 40 3
082H302200 AME 55 24 (0-10V) 8 40 3
082G145000 AMV 85 24VAC 8 40 10.7
082G145100 AMV 85 230VAC 8 40 10.7
082G145200 AME 85 24 (0-10V) 8 40 10.7
DANFOSS ACTUATORS AMV 655 / AME 655 FOR USE WITH VF2 2 PORT DN200-DN250 AND AME 855 0-10V FOR USE WITH VF3 3PORT DN200-DN300
• Manual operation mechanical and/or electrical• Position indication, LED signalization• Inverse function• Selectable speed• Pulse output signal (4, 5)• Thermic and overload protection• Precise regulation and fast response on 3-point signal (0.04s)
Part No. Type Supply Voltage Description082G344000 AMV655 24V FOR VF2 200-250
082G344100 AMV655 230V FOR VF2 200-250
082G344200 AME655 24V 0-10V MODULATING FOR VF2 200-250
082G344300 AME655 230V 0-10V MODULATING FOR VF2 200-250
082G351000 AME855 24V 0-10V MODULATING FOR VF3 DN 200-DN 300
082G351100 AME855 230V 0-10V MODULATING FOR VF3 DN 200-DN 300
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 56
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
57
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Danfoss Actuators (Spring Return) / PCIV Radiator Valves
DANFOSS ACTUATORS AME 438SU AND AMV 438SU• 450N actuator, standard speed actuator for use when SPRING RETURN function is required• For use in 3-point modulating applications• Diagnostic LED (AME)• Self-stroking• For use with valves up to 50mm
Use with VRB, VRG and VF valves in sizes 15-50mmTechnical data
AME 438 Modulating• Power supply 24VAC / DC, ±10%• Power consumption 14VA• Frequency 50Hz / 60 Hz• Control input Y 0-10V (2-10V) Ri = 24 kΩ 0-20 MA (4-20 MA) Ri = 500 Ω• Output signal X 0-10V (2-10V)• Close of force 450 N• Max. stroke 15 mm• Speed 15 s/mm• Max. medium temperature 150°C• Ambient temperature 0 to 55°C• Storage and transport temperature –40 to +70°C• Protection class II• Degree of protection IP54• Weight 2.3KG• CE marking in accordance Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14with standards EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3
AMV 438 3-Point Control and AME 230V• Power supply 24VAC / DC, 230VAC; +10 to –15%• Power consumption 2VA• Frequency 50Hz or 60 Hz • Control input 3 point• Close of force 450 N• Max. stroke 15 mm• Speed 15 s/mm• Max. medium temperature 150°C• Ambient temperature 0 to 55°C• Storage and transport temperature –40 to +70°C• Protection class II• Degree of protection IP54• Weight 2.3KG• CE marking in accordance Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14with standards EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3
Part No. Type Description
082H012200 AMV 438SU SUPPLY VOLTAGE: 24VAC /DC SPINDLE SPEED: 15S/MM SPINDLE STROKE: 15MM
082H012300 AMV 438SU SUPPLY VOLTAGE: 230V SPINDLE SPEED: 15S/MM SPINDLE STROKE: 15MM
082H012100 AME 438SU SUPPLY VOLTAGE: 24VAC / DC (0-10V) SPINDLE SPEED: 15S/MM SPINDLE STROKE: 15MM
THE NEW DANFOSS PRESSURE INDEPENDENT RADIATOR VALVE, DYNAMIC VALVE TYPE RA-DVThe RA-DV is a series of pressureindependent radiator valves, designed foruse in 2-pipe heating systems togetherwith all Danfoss range of RA2000sensors.
They are fitted with a flow limiting devicefor presetting the maximum waterflow.The valves are available with maximumwaterflow of 20-125L/H. RA-DV has abuilt in pressure regulator, which keepsthe differential pressure at a constant level of 0.1BAR,thus maintaining the set flow.
NEWPRODUCT
Product Code Description
RA-DV DYNAMIC VALVE 013G772300 TRV DN15 ANGLED
RA-DV DYNAMIC VALVE 013G772400 TRV DN15 STRAIGHT
RA-2910 013G291000 FIXED SENSOR 5-26°C
Thermal Actuator options
Product Code DescriptionTWA-A 088H311200 THERMAL ACUATOR 230V (N/C)
TWA-A 088H311300 THERMAL ACUATOR 230V (N/O)
TWA-A 088H311000 THERMAL ACUATOR 24V (N/C)
TWA-A 088H311100 THERMAL ACUATOR 24V (N/O)
ABNM 082F1091 THERMAL ACUATOR 24V 0-10V
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 57
58
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eDanfoss Independent Balancing and Control Valve
Part No. Type Description003Z126100 AB-QM DN10 LF G1⁄2” EXTERNAL THREAD. MAX FLOW RATE 150 L / H. ORDER FITTINGS SEPARATELY003Z121100 AB-QM DN10 G1⁄2” EXTERNAL THREAD. MAX FLOW RATE 275 L / H. ORDER FITTINGS SEPARATELY003Z126200 AB-QM DN15 LF G3⁄4” EXTERNAL THREAD. MAX FLOW RATE 275 L / H. ORDER FITTINGS SEPARATELY003Z121200 AB-QM DN15 G3⁄4” EXTERNAL THREAD. MAX FLOW RATE 450 L / H. ORDER FITTINGS SEPARATELY003Z121300 AB-QM DN20 G1” EXTERNAL THREAD. MAX FLOW RATE 900 L / H. ORDER FITTINGS SEPARATELY003Z121400 AB-QM DN25 G11⁄4” EXTERNAL THREAD. MAX FLOW RATE 1,700 L / H. ORDER FITTINGS SEPARATELY003Z121500 AB-QM DN32 G11⁄2” EXTERNAL THREAD. MAX FLOW RATE 3,200 L / H. ORDER FITTINGS SEPARATELY003Z076000 AB-QM DN40 G2” EXTERNAL THREAD. MAX FLOW RATE 7,500 L / H. ORDER FITTINGS SEPARATELY003Z076100 AB-QM DN50 G21⁄2” EXTERNAL THREAD. MAX FLOW RATE 12,500 L / H. ORDER FITTINGS SEPARATELY003Z076200 AB-QM DN50 FLANGED. PN16. MAX FLOW 12,500 L / H003Z076300 AB-QM DN65 FLANGED. PN16. MAX FLOW 20,000 L / H003Z076400 AB-QM DN80 FLANGED. PN16. MAX FLOW 28,000 L / H003Z076500 AB-QM DN100 FLANGED. PN16. MAX FLOW 38,000 L / H003Z070500 AB-QM DN125 FLANGED. PN16. MAX FLOW 90,000 L / H003Z071500 AB-QM DN125 HF FLANGED. PN16. MAX FLOW 120,000 L / H003Z070600 AB-QM DN150 FLANGED. PN16. MAX FLOW 145,000 L / H003Z071600 AB-QM DN150 HF FLANGED. PN16. MAX FLOW 229,000 L / H003Z070700 AB-QM DN200 FLANGED. PN16. MAX FLOW 190,000 L / H003Z071700 AB-QM DN200 HF FLANGED. PN16. MAX FLOW 300,000 L / H003Z070800 AB-QM DN250 FLANGED. PN16. MAX FLOW 280,000 L / H003Z071800 AB-QM DN250 HF FLANGED. PN16. MAX FLOW 442,000 L / HFittings (2 per valve)003Z023100 UNION CONNECTION TO PIPE: R3⁄8”. FOR VALVE SIZE DN10. (ONE PCS.)003Z023200 UNION CONNECTION TO PIPE: R1⁄2”. FOR VALVE SIZE DN15. (ONE PCS.)003Z023300 UNION CONNECTION TO PIPE: R3⁄4”. FOR VALVE SIZE DN20 (ONE PCS.)003Z023400 UNION CONNECTION TO PIPE: R1”. FOR VALVE SIZE DN25. (ONE PCS.)003Z023500 UNION CONNECTION TO PIPE: R11⁄4”. FOR VALVE SIZE DN32. (ONE PCS.)003Z027900 UNION CONNECTION TO PIPE: R11⁄2”. FOR VALVE SIZE DN40. (ONE PCS.)003Z027800 UNION CONNECTION TO PIPE: R2”. FOR VALVE SIZE DN50. (ONE PCS.)Actuators082H805600 AMV 110 NL 24VAC, 24 S / MM. 3-POINT. FOR VALVE SIZE DN10 TO DN32082H805700 AME 110 NL 24V, 24 S / MM. 0-10V. FOR VALVE SIZE DN10 TO DN32082H017100 AME 435QM 24V, 7.5 S / MM. 0-10V. FOR VALVE SIZE DN40 TO DN100082H307800 AME 55QM 24V, 8 S / MM. 0-10V. FOR VALVE SIZE DN125 TO DN150082G145300 AME 85QM 24V, 8 S / MM. 0-10V. FOR VALVE SIZE DN200 TO DN250
TYPE ABQMThe ABQM is a PIBCV (Pressure IndependentBalancing and Control Valve) which combines thebenefits of a control valve and a differentialpressure controller, which work in tandem toprovide the ultimate in system control and settingaccuracy. The differential pressure controllerwithin the valve keeps constant differentialpressure across the valve cone, meaning thatchanges in system pressure do not affect thecontrol characteristics of the valve.
REDUCEDPRICE
PROJECTDISCOUNTS
ALSO AVAILABLEFOR QUANTITYCONTACT HEAT& COMBUSTIONFOR QUOTES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 58
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
59
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Regin Lift and Lay Valves c/w 0-10v Actuator Eurospartan Lift and Lay Valves
REGIN LIFT AND LAY VALVES C/W 0-10V ACTUATORA very competitvely priced range of 2 and 3port lift and lay valves. Sizes 1” (DN25) - 11⁄2”(DN40) with 0-10V motor (24V on/off availableon request) Brass body and brass plug withstainless steel spindle. EPDM O Ring valves have linear flowcharacteristics.
Features• PN16 Rated• Media = Water (suitable for30% Glycol)
• The 0-10V RVAZ acuator hasa 0-100% scale mounted onthe knob.
• Manual override function• Torque rating 400NM• Stroke length 5.5mm
Part Number Description KVSZTVB 25-8 2 PORT 1” 2 PORT KVS 8
ZTVB 32-15 2 PORT 11⁄4” 2 PORT KVS 15
ZTVB 40-20 2 PORT 11⁄2” 2 PORT KVS 20
ZTVB 25-8 3 PORT 1” 3 PORT KVS 8
ZTVB 32-15 3 PORT 11⁄4” 3 PORT KVS 15
ZTVB 40-20 3 PORT 11⁄2” 3 PORT KVS 20
Motors Part No
RVAZ-24A 0-10V ACTUATOR FOR ABOVE VALVES (NO LINKAGE REQUIRED)
NEWPRODUCT
CREDIT ACCOUNT HOLDERS can accesstheir live prices, privileged offers,special news and other exciting
information when they log into theportal on our home page.
www.heatcombustion.co.uk
EUROSPARTAN 3 PORT LIFT AND LAYVALVESPrimarily designed for use on closed systems,these valves can nonetheless be used in manyother applications. Dezincification resistant,they can be used in most HVAC controlsystems as well as industrial applications.When used on mains water or open systems,such as cooling towers or open tankinstallations, mineral deposit build-up mayaffect operation requiring more frequentmaintenance. For heat transfer oils, steam,brine, seawater, etc., Refer to the factory withfull details of the fluid specification. Suitable foruse as either 2-way or 3-way valves, in hot orcold water systems, and with static pressurerating suitable to 400 psi., (ANSI 250), they adapt to low orhigh rise installations.
Part Number Size Description KV
VE-411-5320 11⁄2”BSP VALVE / LINKAGE /0-10V ACTUATOR
13.3
VE-411-5320 2”BSP VALVE / LINKAGE /0-10V ACTUATOR
29.2
VE-411-5330 2”BSP VALVE / LINKAGE /0-10V ACTUATOR
37.5
VE-411-JOV* 3”FL VALVE / LINKAGE /0-10V ACTUATOR
95.0
*This version only available with Nenutec style motor
Spares
ME5320 SPARE MOTOR (UP TO 2”)
ME5330 SPARE MOTOR 3”
REDUCEDPRICE ON CERTAIN
LINES
WHILSTSTOCKLAST!
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 59
60
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eRotary Shoe ValvesButterfly Valves with Nenutec Motor
TERMOMIX VALVE (SCREWED VERSIONS)
TERMOMIX VERSIONS C/W ET3 LINKAGE ANDNENUTEC MOTOR (SIZES 3⁄4” DN20 - 2” DN50)3 port cast iron rotary shoe valves for use in heating systems foreither mixing or diverting applications. Fluid temperature -15°C to +110°C . The valves have female threaded connectionsin sizes from 3⁄4” DN20 to 2" DN50. Valves fitted with the Nenutecstyle Motor and ET3 linkage.
Part Number Size KVS2320 3⁄4” KVS 13
2325 1” KVS 17
2332 11⁄4” KVS 24
2340 11⁄2” KVS 31
2350 2” KVS 41
ET3 FOR ALL SIZES
NEAM 24-1-08S 24V 0-10V MODULATING C/W SWITCH 8NM
VALVE
Part Number Description
NEAA 24-08 24VAC 8NM
NEAA 230-08 230VAC 8NM
NEAA 24-08S 24VAC C/W SWITCH 8NM
NEAA 230-08S 230VAC C/W SWITCH 8NM
NEAM 24-1-08 24V 0-10V MODULATING 8NM
MOTOR OPTIONS
LINKAGE
BUTTERFLY VALVES WITH NENUTEC MOTORA range of wafer typebutterfly valves as used inheating and cooling watersystems. The 405 seriesvalve as standard gives 100%tight shut off up to 100mm.The standard 16NM Nenutecactuator is available in 240Vor 24VAC.Also with auxiliary switch ifrequired. 0-10V version alsoavailable. EFS Electronic FailSafe also available (see below).Features• Body: Aluminium (40mm version
modular iron)• Shaft: Stainless steel (AISI420)• Disc: Stainless steel 1.4408 (AISI316)• Seat: EPDM• Leakage: Tight shut off (up to 100mm)
for tight shut off for 125-150mm use 32NM motor
• Fluid temperature: -40°c to +120°c• Flanges to suit: PN10, PN16, ANSI150• Max working pressure:6 BARPart Number DescriptionVALVE BODY405WEHT DN40(MM)405WEHT DN50(MM) 405WEHT DN65(MM) 405WEHT DN80(MM) 405WEHT DN100(MM) 405WEHT DN125(MM) 405WEHT DN150(MM) Motors to suit 405 valve body (up to DN100)NEAA24-16 24VAC 16NMNEAA230-16 230V 16NMNEAA24-16S 24VAC 16NM C/W SWITCHNEAA230-16S 230V 16NM C/W SWITCHNEAM24-1-16 24V 0-10V 16NMNEAM24-1-16S 24V 0-10V 16NM C/W SWITCHMotors to suit 405 valve body (up to DN125-DN150)NEAA24-32 24VAC 32NMNEAA230-32 230V 32NM NEAA24-32S 24VAC 32NM C/W SWITCHNEAA230-32S 230V 32NM C/W SWITCHNEAM24-1-32 24V 0-10V 32NM NEAM24-1-32S 24V 0-10V 32NM C/W SWITCH
Electronic Fail Safe to suit 405 valve body (DN40-DN100)For above DN100 contact Heat & Combustion
FSAA24-16 24VAC 16NM FSAA230-16 230VAC 16NM FSAA24-16S 24V 16NM C/W SWITCHFSAA230-16S 230V 16NM C/W SWITCHFSAM24-2-16 24V 0-10V 16NMFSAM24-2-16S 24V 0-10V 16NM C/W SWITCH
FOR LARGER VALVES 150MM-300MM ELECTRICALLY ACTUATEDCONTACT HEAT & COMBUSTION
150MM TO300MMVersion
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 60
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
61
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Rotary Shoe Valves
Part Number Description
AMB162082H0213 24V 5NM
AMB162082H0218 24V WITH AUX SWITCH 5NM
AMB162082H0222 230V 5NM
AMB162082H0228 230V WITH AUX SWITCH 5NM
AMB162082H0230 24V 0-10V MODULATING 5NM
Part Number Description
ET3 LINKAGE FOR NENUTEC - HF3 VALVE
NEAA 24-16 24VAC 16NM
NEAA 230-16 230VAC 16NM
NEAA 24-16S 24VAC C/W AUX SWITCH 16NM
NEAA 230-16S 23OV C/W AUX SWITCH 16NM
NEAM 24-1-16 24V 0-10V MODULATING 16NM
NEAM 24-1-16S
24V 0-10V MODULATING C/WAUX SWITCH 16NM
MOTOR OPTIONS: NENUTEC (WITH ET3 LINKAGE) FOR 21⁄2”(DN65) TO 4” (DN100)
Part Number Description
ET3 LINKAGE FOR NENUTEC - HF3
NEAA 24-24 24VAC 24NM
NEAA 230-24 230VAC 24NM
NEAA 24-24S 24VAC C/W AUX SWITCH 24NM
NEAA 230-24S 23OV C/W AUX SWITCH 24NM
NEAM 24-1-24 24V 0-10V MODULATING 24NM
NEAM 24-1-24S
24V 0-10V MODULATING C/WAUX SWITCH 24NM
NENUTEC OPTION (WITH ET3 LINKAGE) FOR 5” (DN65) TO 6”(DN100)
Part Number Description
AMB182082H0018 10NM 24VAC (DN65-DN100)
AMB182082H0021 15NM 24VAC (DN125-DN150)
AMB182082H0017 10NM 230VAC (DN65-DN100)
AMB18208240019 15NM 230VAC (DN125-DN150)
AMB182082H0023
15NM 24V 0-10VMODULATING (DN65-DN150)
DANFOSS OPTION (NO LINKAGE REQUIRED) FOR 21⁄2” (DN65) TO6” (DN150) NOTE: NO AUX SWITCH AVAILABLE
DANFOSS VERSIONS Sizes 3⁄4" (DN20) - 2” (DN50) for use with onlythe Danfoss AMB type motors (direct mount nolinkage) or Danfoss flanged versions 21⁄2”(DN65) to 6” (DN150) with option of eitherDanfoss AMB motors or ET3 linkage withNenutec motor.
DANFOSS VALVE (SCREWED VERSIONS) TYPE HRE3
DANFOSS VALVE (FLANGED VERSIONS) TYPE HF3
Part Number Size KVS
HRE3-065Z0418 3⁄4” KVS 6.3
HRE3-065Z0419 1” KVS 10
HRE3-065Z0420 11⁄4” KVS 16
HRE3-065Z0421 11⁄2” KVS 25
HRE3-065Z0422 2” KVS 40
Part Number Size KVS
HF3-065Z0433 21⁄2” (65mm) KVS 90
HF3-065Z0434 3” (80mm) KVS 150
HF3-065Z0435 4” (100mm) KVS 225
HF3-065Z0436 5” (125mm) KVS 280
HF3-065Z0437 6” (150mm) KVS 400
AMB162 MOTORS TO SUIT HRE3 NO LINKAGE REQUIRED
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 61
62
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Outdoor Protective Covers Miscellaneous Linkage KitsDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
ROBUST PROTECTIVE COVER FOR CONTROL VALVESAND DAMPER ACTUATORSIf you have difficult operating conditions then it is the idealsolution for protecting your control valves in harshenvironments.The BLUE BAG Series cover offers an innovative and effectiveweather protection solution for control valves and actuators.Made of heavy duty fabric, it gives significant protection againstsevere weather such as rain, sleet or snow. The “Ice Blue”colour minimizes solar glare which keeps the protectedequipment cooler than other forms of protection It can beinstalled and removed in seconds and it is available in two sizesto fit various control valve assemblies. • Easiest of Installations• Long lasting nylon rope included• Ice Blue colour to minimise solar glare• Water repellent fabric• Keeps equipment cooler in hot conditions• Keeps equipment clean and protected• UV Protective coating.
10”
12”
Product
LARGE OUTDOOR PROTECTIVE COVER SUITABLEFOR MOST MAKES OF MOTORISED VALVES
SMALL OUTDOOR PROTECTIVE COVERSUITABLE FOR DAMPER ACTUATORS.
12”
16”
Part Number
EE2MB FOR USE WITH MB VALVES (USE 8NM)
EE2MBF FOR USE WITH MBF VALVES (USE 16NM)
SPARE LINKAGES FOR NENUTEC - SATCHWELLMB / MBF VALVES
NOTES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 62
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
63
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Damper Actuators
PartNumber
NM Voltage Control Aux.Switches
NEAA24-16 16 24VAC / DC 2 / 3 POINT NO
NEAA24-16S 16 24VAC / DC 2 / 3 POINT YES
NEAA230-16 16 230VAC 2 / 3 POINT NO
NEAA230-16S 16 230VAC 2 / 3 POINT YES
NEAM24.1-16 16 24VAC / DC 0-10V NO
NEAM24.1-16S 16 24VAC / DC 0-10V YES
16NM TERMINAL TYPE (3.0M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NEAA24-20 20 24VAC / DC 2 / 3 POINT NO
NEAA24-20S 20 24VAC / DC 2 / 3 POINT YES
NEAA230-20 20 230VAC 2 / 3 POINT NO
NEAA230-20S 20 230VAC 2 / 3 POINT YES
NEAM24.1-20 20 24VAC / DC 0-10V NO
NEAM24.1-20S 20 24VAC / DC 0-10V YES
20NM WITH FLYING LEAD (4.0M2 DAMPER SIZE)
5NM WITH FLYING LEAD (1.0M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NEAA24-05 5 24VAC / DC 2 / 3 POINT NO
NEAA24-05S1 5 24VAC / DC 2 / 3 POINT YES
NEAA230-05 5 230VAC 2 / 3 POINT NO
NEAA230-05S1 5 230VAC 2 / 3 POINT YES
NEAM24.2-05 5 24VAC / DC 0-10V NO
PartNumber
NM Voltage Control Aux.Switches
NEAA24-08 8 24VAC / DC 2 / 3 POINT NO
NEAA24-08S 8 24VAC / DC 2 / 3 POINT YES
NEAA230-08 8 230VAC 2 / 3 POINT NO
NEAA230-08S 8 230VAC 2 / 3 POINT YES
NEAM24.1-08 8 24VAC / DC 0-10V NO
NEAM24.1-08S 8 24VAC / DC 0-10V YES
8NM TERMINAL TYPE (1.5M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NEAA24-10 10 24VAC / DC 2 / 3 POINT NO
NEAA24-10S 10 24VAC / DC 2 / 3 POINT YES
NEAA230-10 10 230VAC 2 / 3 POINT NO
NEAA230-10S 10 230VAC 2 / 3 POINT YES
NEAM24.1-10 10 24VAC / DC 0-10V NO
NEAM24.1-10S1 10 24VAC / DC 0-10V YES
10NM WITH FLYING LEAD (2.0M2 DAMPER SIZE)
A range of actuators suitable for dampers andalso for use with valve bodies such as Termomix /Danfoss and our range of 405 WEHT butterflyvalves. These actuators are available from stockin 5, 8, 10, 16, 20, 24 & 32NM. 24VAC / DC, 240V,0-10V, with and without aux switches. Also springreturn versions in 5 and 8NM.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 63
64
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eDamper Actuators
PartNumber
NM Voltage Control Aux.Switches
NEAA24-24 24 24VAC / DC 2 / 3 POINT NO
NEAA24-24S 24 24VAC / DC 2 / 3 POINT YES
NEAA230-24 24 230VAC 2 / 3 POINT NO
NEAA230-24S 24 230VAC 2 / 3 POINT YES
NEAM24.1-24 24 24VAC / DC 0-10V NO
NEAM24.1-24S 24 24VAC / DC 0-10V YES
24NM WITH TERMINAL TYPE (4.5M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NEAA24-32 32 24VAC / DC 2 / 3 POINT NO
NEAA24-32S 32 24VAC / DC 2 / 3 POINT YES
NEAA230-32 32 230VAC 2 / 3 POINT NO
NEAA230-32S 32 230VAC 2 / 3 POINT YES
NEAM24.1-32 32 24VAC / DC 0-10V NO
NEAM24.1-32S 32 24VAC / DC 0-10V YES
40NM VERSIONS AVAILABLE ON REQUEST
32NM TERMINAL TYPE (6.0M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NESA24-05 5 24VAC / DC 2 POINT NO
NESA24-05S1 5 24VAC / DC 2 POINT YES
NESA230-05 5 230VAC 2 POINT NO
NESA230-05S1 5 230VAC 2 POINT YES
NESM24.1-03 3 24VAC / DC 0-10V NO
5NM - SPRING RETURN VERSION - FLYING LEAD(1.0M2 DAMPER SIZE)
PartNumber
NM Voltage Control Aux.Switches
NESA24-08 8 24VAC / DC 2 POINT NO
NESA24-08S 8 24VAC / DC 2 POINT YES
NESA230-08 8 230VAC 2 POINT NO
NESA230-08S 8 230VAC 2 POINT YES
NESM24.1-08 8 24VAC / DC 0-10V NO
8NM - SPRING RETURN VERSION - FLYING LEAD (1.5M2 DAMPER SIZE)
CRANK ARM AND BALL JOINT
Part Number
NAA CRANK ARM
NAH CRANK ARM
NAG BALL JOINT
NPG1 DIGITAL POSITION TRANSMITTERThe NPG1 series position transmitter is designed for the controlof modulating actuators, with an operating range of 0-10VDC or2-10VDC. For use as a minimum position controller, providing alow limit for the output signals from a modulating controller.
Part Number
NPG1
M16-M20 METAL ADAPTOR
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 64
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
65
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Electronic Fail Safe Actuators
EFS ELECTRONIC FAIL SAFE ROTARY ACTUATORS (SIMILAR TO BELIMO SPRING RETURN VERSION)The new range of Nenutec Electronic fail-safe function actuators for dampers, ball and butterfly valves. Available in both 24VAC / DC, 230V on / off and 0-10V modulating. 5NM through to 24NM versions.
Rotary / damper / ball valve actuators with electronic fail-safe (EFS) function are designed and produced for extendedfunctionalities in the HVAC systems and in laboratory applications.EFS is able to manage short voltage interruptions for max 4 seconds. In case of longer voltage interruption they will move thedampers or valves if necessary to a pre-defined emergency position (EFS).
Part Number Part NumberBelimo spring return version
NM Voltage Control
FSAA24-05 LF24 5 24VAC / DC 2 POINT
FSAA230-05 LF230 5 230VAC 2 POINT
FSBA24-05 TRF24-2 5 24VAC / DC 2 POINT BALL VALVE
FSBA230-05 N / A 5 230VAC 2 POINT BALL VALVE
FSAA24-08 NF24A 8 24VAC / DC 2 POINT
FSAA24-08S NF24A-S2 8 24VAC / DC 2 POINT C/W SWITCH
FSAA230-08 NF230A 8 230VAC 2 POINT
FSAA230 - 08S NF230A-S2 8 230VAC 2 POINT C/W SWITCH
FSAA24-16 SF24A 16 24VAC / DC 2 POINT
FSAA24-16S SF24A-S2 16 24VAC / DC 2 POINT C/W SWITCH
FSAA230-16 SF230A 16 230VAC 2 POINT
FSAA230-16S SF230A-S2 16 230VAC 2 POINT C/W SWITCH
FSAA24-24 EF24A 24 24VAC / DC 2 POINT
FSAA24-24S EF24A-S2 24 24VAC / DC 2 POINT C/W SWITCH
FSAA230-24 EF230A 24 230VAC 2 POINT
FSAA230-24S EF230A-S2 24 230VAC 2 POINT C/W SWITCH
FSAM24.2-05 LF24-SR 5 24VAC / DC 0-10V MODULATING
FSBM24.2-05 TRF24A-SR 5 24VAC / DC 0-10V MODULATING BALL VALVE
FSAM24.2-08 NF24-SR 8 24VAC / DC 0-10V MODULATING
FSAM24.2-08S NF24A-SR-S2 8 24VAC / DC 0-10V MODULATING C/W SWITCH
FSAM24.2-16 SF24A-SR 16 24VAC / DC 0-10V MODULATING
FSAM24.2-16S SF24A-SR-S2 16 24VAC / DC 0-10V MODULATING C/W SWITCH
FSAM24.2-24 EF24A-SR 24 24VAC / DC 0-10V MODULATING
FSAM24.2-24S EF24A-SR-S2 24 24VAC / DC 0-10V MODULATING C/W SWITCH
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 65
Cold and Hot Water Meters (M.I.D. Versions)66
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
TEKSAN RANGE OF COLD WATERMETERS C/W PULSEAll M.I.D. as standard
(50°C max on screwed, 30°C on flangedversions).Multijet dry type (screwed) and Woltman Turbine type (flanged)c/w pulsed output from sizes 1⁄2”-2” screwed and 2”-6” flanged.16 BAR rated horizontal mounting as standard. M.I.D Class III.
PartNumber
Size StandardSetting
Nom.Flowm3/h
Max.Flowm3/h
TR15 COLD 1⁄2” 1 PULSE = 1 LITRE 2.5 3.125
TR20 COLD 3⁄4” 1 PULSE = 1 LITRE 2.5 3.125
TR25 COLD 1” 1 PULSE = 1 LITRE 6.3 7.9
TR32 COLD 11⁄4” 1 PULSE = 1 LITRE 6.3 10
TR40 COLD 11⁄2” 1 PULSE = 10 LITRE 16.0 20
TR50 COLD 2”SC 1 PULSE = 10 LITRE 25.0 31.25
WS-DN50 COLD 2”FL 1 PULSE = 100 LITRE 25.0 31.25
WS-DN65 COLD 21⁄2”FL 1 PULSE = 100 LITRE 40.0 50
WS-DN80 COLD 3”FL 1 PULSE = 100 LITRE 63.0 78.75
WS-DN100 COLD 4”FL 1 PULSE = 100 LITRE 100.0 125
WS-DN125 COLD 5”FL 1 PULSE = 100 LITRE 160.0 200
WS-DN150 COLD 6”FL 1 PULSE = 100 LITRE 250.0 312.50
PADPULS PULSE TO MBUS CONVERTOR
PartNumber
Size StandardSetting
Nom.Flowm3/h
Max.Flowm3/h
TR15 HOT 1⁄2” 1 PULSE = 1 LITRE 2.5 3.125
TR20 HOT 3⁄4” 1 PULSE = 1 LITRE 2.5 3.125
TR25 HOT 1” 1 PULSE = 1 LITRE 6.3 7.9
TR32 HOT 11⁄4” 1 PULSE = 1 LITRE 6.3 10
TR40 HOT 11⁄2” 1 PULSE = 10 LITRE 16.0 20
TR50 HOT 2”SC 1 PULSE = 10 LITRE 25.0 31.25
WS-DN50 HOT 2”FL 1 PULSE = 100 LITRE 25.0 31.25
WS-DN65 HOT 21⁄2”FL 1 PULSE = 100 LITRE 40.0 50
WS-DN80 HOT 3”FL 1 PULSE = 100 LITRE 63.0 78.75
WS-DN100 HOT 4”FL 1 PULSE = 100 LITRE 100.0 125
PADPULS PULSE TO MBUS CONVERTOR
TEKSAN RANGE OF HOT WATERMETERS C/W PULSEM.I.D. Approved where stated (*)all other pending approval.
(90°C max)Multijet dry type (screwed) and WoltmanTurbine type (flanged) c/w pulsed output from sizes 1⁄2”-2”screwed and 2”-4” flanged. 16 BAR rated horizontal mountingas standard.*M.I.D Class III.
NEWPRODUCT
NEWPRODUCT
**
****
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 66
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
67
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Cold and Hot Water Meters (ISO 4064)
HOT WATER (90°C) C/W PULSE AS STANDARDOur range of multijet dry and woltman type hot water meters,complete with pulsed output, from sizes ½”-2” screwed and 2”-8”flanged.16 BAR tested as Class B (horizontal mounting) asstandard, but suitable for vertical (Class A) installation butaccuracy affected (see datasheet for flow rates).IN SOME APPLICATIONS IN CERTAIN ORIENTATIONS ALL HOTMETERS CAN BE LIABLE TO CONDENSATION.
.
PartNumber
Size StandardSetting
Nom.Flowm3/h
Max.Flowm3/h
IP68
LXSCY / R15E 1⁄2” 1 PULSE = 1 LITRE 1.5 3
LXSCY / R20E 3⁄4” 1 PULSE = 1 LITRE 2.5 5
LXSCY / R25E 1” 1 PULSE = 1 LITRE 3.5 7
LXSCY / R32E 11⁄4” 1 PULSE = 1 LITRE 6.0 12
LXSCY / R40E 11⁄2” 1 PULSE = 10 LITRE 10.0 20
LXSCY / R50E 2”SC 1 PULSE = 10 LITRE 15.0 30
IP66
LXLCY / R50 2”FL 1 PULSE = 100 LITRE 15.0 30
LXLCY / R65 21⁄2”FL 1 PULSE = 100 LITRE 25.0 50
LXLCY / R80 3”FL 1 PULSE = 100 LITRE 40.0 80
LXLCY / R100 4”FL 1 PULSE = 100 LITRE 60.0 120
LXLCY / R125 5”FL 1 PULSE = 100 LITRE 100.0 200
LXLCY / R150 6”FL 1 PULSE = 100 LITRE 150.0 300
LXLCY / R200 8”FL 1 PULSE = 1000 LITRE 250.0 500
PADPULS PULSE TO MBUS CONVERTOR
COLD WATER (40°C) C/W PULSE AS STANDARDOur range of multijet dry and woltman type cold water meters,complete with pulsed output, from sizes ½”-2” screwed and 2”-8” flanged. 16 BAR tested as Class B (horizontal mounting) asstandard, but suitable for vertical (Class A) installation butaccuracy affected (see datasheet for flow rates).
PartNumber
Size StandardSetting
Nom.Flowm3/h
Max.Flowm3/h
IP68
LXSCY15E 1⁄2” 1 PULSE = 1 LITRE 1.5 3
LXSCY20E 3⁄4” 1 PULSE = 1 LITRE 2.5 5
LXSCY25E 1” 1 PULSE = 1 LITRE 3.5 7
LXSCY32E 11⁄4” 1 PULSE = 1 LITRE 6.0 12
LXSCY40E 11⁄2” 1 PULSE = 10 LITRE 10.0 20
LXSCY50E 2”SC 1 PULSE = 10 LITRE 15.0 30
IP66
LXLCY50 2”FL 1 PULSE = 100 LITRE 15.0 30
LXLCY65 21⁄2”FL 1 PULSE = 100 LITRE 25.0 50
LXLCY80 3”FL 1 PULSE = 100 LITRE 40.0 80
LXLCY100 4”FL 1 PULSE = 100 LITRE 60.0 120
LXLCY125 5”FL 1 PULSE = 100 LITRE 100.0 200
LXLCY150 6”FL 1 PULSE = 100 LITRE 150.0 300
LXLCY200 8”FL 1 PULSE = 1000 LITRE 250.0 500
PADPULS PULSE TO MBUS CONVERTOR
CONFORM TO INTERNATIONAL STANDARD ISO4064CLASS B (AS STANDARD)
CONFORM TO INTERNATIONAL STANDARD ISO4064CLASS B (AS STANDARD)
Note: Designed for continuous flow conditions within theirmaximum and minimum flow rates. Also can be used withchemically treated water within PH value 6.5-8.0.
Note: Designed for continuous flow conditions within theirmaximum and minimum flow rates. Also can be used withchemically treated water within PH value 6.5-8.0.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 67
68
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eWRAS Approved Water Meters c/w Pulse
Screwed Version - COLD
Part Number
Size Nom.Flowm3/h
Max.Flowm3/h
GMDX15 -COLD
1⁄2” 1.5 3
GMDX20 -COLD
3⁄4” 2.5 5
GMDX25 -COLD 1” 3.5 7
GMDX32 -COLD 11⁄4” 6 12
GMDX40 -COLD 11⁄2” 10 20
GMDX50 -COLD 2” 15 30
Flanged Version - COLD (M.I.D AS STANDARD)
PartNumber
Size Nom.Flowm3/h
Max.Flowm3/h
F50WC 2” 15 30
F65WC 21⁄2” 25 50
F80WC 3” 40 80
F100WC 4” 60 120
F125WC 5” 100 200
F150WC 6” 150 300
F200WC 8” 250 500
PADPULS PULSE TO MBUS CONVERTOR
Standard Setting
Standard Setting
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 1000 LITRES
1 PULSE = 1000 LITRES
SCREWED VERSION (COLD)A range of Class B Multijet, drydial 16BAR Rated water meters WRASapproved. Suitable for Cold water to 30°C.Suitable for horizontal installation. New MID/WRAS versions atsame price due Spring 2015.
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 10 LITRES
1 PULSE = 10 LITRES
NEWPRODUCT
REDUCEDPRICE
SCREWED VERSION (HOT)A range of Class B Multijet, drydial 16Bar Rated water meters WRAS andM.I.D. approved.Suitable for hot water up to 90°C and due to health risks ofwarm water for drinking puposes, WRAS do not conduct testabove 40°C. Therefore this is above the threshold of coldwater meters, we cannot sell a product as WRAS approved onthe dial face, which we promote as being 90°C capable. It wouldgive the impression that the WRAS approval is also rated at90°C, which would be untrue, on the meter it will only be WRASapproved to 40°C.
NEWPRODUCT
REDUCEDPRICE
Screwed Version - HOT
Part Number
Size Nom.Flowm3/h
Max.Flowm3/h
GMDX15 -HOT
1⁄2” 1.5 3
GMDX20 -HOT
3⁄4” 2.5 5
GMDX25 -HOT 1” 3.5 7
GMDX32 -HOT 11⁄4” 6 12
GMDX40 -HOT 11⁄2” 10 20
GMDX50 -HOT 2” 15 30
Flanged Version - HOT (M.I.D AS STANDARD)
PartNumber
Size Nom.Flowm3/h
Max.Flowm3/h
F50WH 2” 15 30
F65WH 21⁄2” 25 50
F80WH 3” 40 80
F100WH 4” 60 120
F125WH 5” 100 200
F150WH 6” 150 300
F200WH 8” 250 500
PADPULS PULSE TO MBUS CONVERTOR
Standard Setting
Standard Setting
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 100 LITRES
1 PULSE = 1000 LITRES
1 PULSE = 1000 LITRES
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 1 LITRE
1 PULSE = 10 LITRES
1 PULSE = 10 LITRES
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:20 Page 68
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
69
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
130°C Hot Water Meters
THE NEW ULTRAFLOW U1000EMENERGY METER NOW AS STANDARDWITH BUILT IN HEATMETERAlso comes complete with an adjustable railwhich will allow the “one unit” to be suitablefor all pipe sizes up to and including 4”. The new alternative tocutting pipes and mechanical meters for simple low cost flowmeasurement from outside the pipe. Suitable for iron,steel,stainless steel, copper and plastic pipes.Simple to instal, clamp on to the pipe and connect power. Nospecialist skills or tools required.Power supply 12-24VAC/DC. Complete with built in heatmeterintegrator.
Part Number
U1000EM ENERGY METER
JS130 MTHW METERS (130°C VERSIONS) C/WPULSED OUTPUT (SCREWED)
WOLTMAN TYPE FLANGED (130°C VERSIONS) C/WPULSED OUTPUT (FLANGED)
PADPULS PULSE TO MBUS CONVERTOR
ULTRAFLOW U5500 ENERGY METERReplaces Ultraflow U3000B.Clamp on meter similar to U1000EM (above)but suitable for larger pipes 5” and upwards.Power supply 24VAC/DC or 86V-264VAC.Complete with built in heatmeter integrator.
ALSO PORTABLE VERSIONSAVAILABLE, TYPES PF330AND PF4401PContact Heat and Combustion fordetails.
Part Number
U5500 ENERGY METER
Clamp-on Water Meters
NEWPRODUCT
NEWPRODUCT
Part Number Size ConstantFlowm3/h
Max.Flowm3/h
JS130 NK 6.3 1” 6.3 7.875
JS130 NK 10 11⁄4” 10 12.5
JS130 NK 16 11⁄2” 16 20
Part Number Size ConstantFlowm3/h
OverloadFlowm3/h
MWN130 NK50 2”FL 40 50
MWN130 NK65 21⁄2”FL 63 78.75
MWN130 NK80 3”FL 100 125
MWN130 NK100 4”FL 160 200
MWN130 NK150 6”FL 400 500
PADPULS PULSE TO MBUS CONVERTOR
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 69
70
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Water Meter GuidelinesDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
WATER METER GUIDELINESGeneral terms of reference and sizing1. Maximum flow is only for use in emergencies, for about 1-2 minutes as it causes the bearings to overheat.2. Minimum flow only refers to the minimum flow required to operate and record on the meter. At these very low flows, the meter willnot be accurate .
3. All water meters should be sized between transitional flow (the point at which the meter is accurate) and nominal flow (everydayflow rate). Never use maximum flow as a basis for sizing the meter.
Filtration4. The meters are designed only for use with clean water. A filter is always recommended upstream of the meter if there are anyconcerns. This filter should also have straight pipe of at least 10x diameters of the pipe from the meter to allow the flow to settleagain. For example, a DN25 (1") meter would need 250mm (10") between the filter and the meter.
Installation
1. The preferred mounting position is horizontal with the dial facing upwards. Not to be mounted vertically. Never put the meter upsidedown or canted on its side as it will not function correctly .
2. Water meters should always be fitted with a minimum of 10x pipe diameter both up and downstream. For example, a 2" (Dn50)water meter would have 20" (500mm) either side of the meter as straight pipe. This is to ensure accurate reading by reducing waterturbulence. At higher pressures (above 8 bar), this should be increased to 10x pipe diameter.
3. Note that there is a direction of flow arrow on the meter. Also, that the meter has the size in mm onone side and the maximum flow on the other in metres cubed per hour. Remember that the metermust only be used for half of this maximum flow for constant use, maximum flow only being used forshort periods of 1-2 minutes.
4. It is recommended as good practice to fit a removeable filter element before a water meter to protectthe mechanism.
5 .Only clean water should be used that does not exceed the temperature specification of the meter.Temperature specification is 30°C for cold meters and 90°C hot meters.Certain inhibitors used in heating systems can damage the meter body, mechanism or the seals. This damage could cause leaks orfailure of the meter.6. When installing the reed switch (pulsed output wire), the distance from the meter to the control unit/pulse counter is best keptunder 20 metres as voltage will drop.
The reed switches are normally open, volt free, but operate on the 0-24VDC range when the pulse is made. A magnet on the watermeter will close the switch to form the circuit when the designed pulse for that meter is reached. This then sends a signal to thecontrol unit/pulse counter. The two wires that leave the pulse cable attached to the meter are not polarity sensitive.LocationWater meters should never be installed where there is a risk of wateringression, for example, underground or exposed to the elements atany time. Additionally, they should not be exposed to extremes oftemperature. Like any other fitting, freezing can damage the dialmechanism and crack the meter body. Meters should always beprotected from these risks.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 70
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
71
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Energy Meter Calculators M.I.D. Approved
MULTICAL 602 CALCULATOR (M.I.D. APPROVED)The multical type 602 is used in conjunction with our water meters in water based plants withflow temperatures from 2 to 160°C and with all flowmeter sizes between QP 0.6 M / H and QP3000 M / H complete with pulsed output for volume & energy complete also with flow, returnsensors and pockets. Available in battery. 230VAC or 24VAC.Technical InformationTemperature Range: 0°C to 165°CDiff Temperature Range: 0 K to 160 KTemperature Sensors: PT 500 - EN 60 751Display: LCD, 8+3 digits, 7mm digit heightHousing Protection: IP54Temperature Sensors: 1.5M length (as standard) 3,5 & 10M available on requestMountain Bracket: Supplied as standardK = 1 version for ½”- 11⁄4” (identified by last two digits on 3rd line of identity label i.e. 10)K = 10 version for 1½” - 2” sc (identified by last two digits on 3rd line of identity label i.e. 11)K = 100 version for flanged versions (identified by last two digits on 3rd line of identity label i.e.12)Ordering InformationWhen ordering Multical 602 remember to order relevant mechanical meter.Standard sensors / pocket supplied is ½” bsp x 50mm long (up to 2”),1⁄2”BSP x 77mm long (21⁄2”-4”) for meters 5’’ and above, longer pockets areusually required (140mm).
ZENNER RANGE OF WR3 BATTERY HEAT METERCALCULATORS (MADE IN GERMANY) (M.I.D.APPROVED)The Zenner range of WR3 battery powered Heat meterCalculators, M.I.D Approved, are available in pulse values of1,10 and 100 litres. Can be supplied in both standard pulseversion, or M-BUS version. Housing can be opened withouttools. Integrated wall and rail mounting with 2 x additional in /outputs. To be used with ourmechanical range of standardwater meters. i.e. 2 watermetres with 1 energyclaculator.The standard cable sizessupplied are:DN15-DN32 = 1.5 metres,DN40 and above = 3.0 metres.Longer 10M leads available onrequest.
Part Number Description
WR3 CALCULATOR 1P = 1L FOR DN15-DN32 METER
WR3 CALCULATOR 1P = 10L FOR DN40-DN50 METER
WR3 CALCULATOR 1P = 100L FOR DN50FL-DN125FL METER
WR3 CALCULATOR 1P = 1000L FOR DN150FL METER
WR3 CALCULATOR C/WM.BUS 1P = 1L FOR DN15-DN32 METER
WR3 CALCULATOR C/WM.BUS 1P = 10L FOR DN40-DN50 METER
WR3 CALCULATOR C/WM.BUS 1P = 100L FOR DN50FL-DN125FL METER
WR3 CALCULATOR C/WM.BUS 1P = 1000L FOR DN150FL METER
BATTERY POWERED
Part Number
CF51 HEAT METER K = 1, 10 or 100
CF51 HEAT METER K = 1000
Spares
CF POCKET 50MM
CF POCKET 77MM
BATTERY
MAINS MODULE
SPARE TEMP SENSORS SET 1.7M
SPARE TEMP SENSORS SET 5.0M
SPARE TEMP SENSORS SET 10.0M
PULSE/M-BUS MODULE CARD
ACTARIS / ITRON CF51 HEAT METER (M.I.D. APPROVED)Made in Germany, equivalent to the kamstrup 602, completewith flow & return sensors & pockets M-BUS as standard aswell as pulsed output to work with ourrange of mechanical meters.Features• Same terminal connectionsas 602
• 1.75m leads as standard• Available in batteryversion - 12 year life(replacementplug in Battery)or 230VACmains version
• Pocket length forK-1 and K-10 = 50mm, for K-100 = 90mm
Additional Options• Extra length cable available(5 & 10 metre lengths)
Part Number
MULTICAL 602
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 71
72
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
eCompact Mechanical Heat Meters & Ultrasonic Heat Meters
THE NEW VHS & VHM 20 TYPEMECHANICAL COMPACT HEAT METER Features• LCD display with review of the last 12months
• Lithium battery 10 year lifetime• Temperature range 5-90°C• Pulsed and MBUS output as standard• M.I.D. Approved• Unit c/w couplings, matching sensors and pockets as standard
THE NEW TEKSAN RANGE TYPE HMMECHANICAL COMPACT HEAT METERFeatures• Fully electronic calculator and display• Electronic sensor control for recording flowrate
• Lithium battery 10 year lifetime• Reading date for billing• Single line 8 digit display foreasy meter reading
• Sealed IP54 electronic housing• Brass body• Water temperature up to 90°C• Pulse and MBUS output
as standard in the oneunit
• M.I.D. Approved• Unit C/W couplings and returnsensor Pocket as standard optionalball valve for direct sensor connection ifrequired.
NEWPRODUCT
NEWPRODUCT
PartNumber
Description Min.Flowm3/h
Nom.Flowm3/h
VHS20 3⁄4” SINGLE JET HEATMETERC/W PULSE/MBUS OUTPUT 0.05 2.5
VHM20 3⁄4” MULTI JET HEATMETER C/WPULSE/MBUS OUTPUT 0.05 2.5
Part Number Description Nom.Flowm3/h
Max.Flowm3/h
HM 15 1⁄2” MBUS/PULSEDOUTPUT METER 1.5 3
HM 20 3⁄4” MBUS/PULSEDOUTPUT METER 2.5 5
THE VHU RANGE OF COMPACT ULTRASONICHEAT METERSA low cost compact range of MID Class 2 (EN1434)Ultrasonic battery operated only, heatmeters. The standardbasic unit comes c/w MBUS/pulse output as standard.Heating version c/w sensors and a pocket (flow sensorfitted in body for sizes up to 11⁄4”) optional ball valve
connection for flow sensors from DN20-DN32). Flanged from DN50 (2”) andabove
Cooling version available on requestcontact Heat and Combustion for prices.
Part Number Description Connection Size OutputsVHU20 COMPACT ULTRASONIC 2.5M3/H DN20 / 3⁄4” M-BUS / PULSEVHU32 COMPACT ULTRASONIC 6.0M3/H DN32 / 11⁄4” M-BUS / PULSEVHU40 COMPACT ULTRASONIC 10.0M3/H DN40 / 11⁄2” M-BUS / PULSEVHU50 COMPACT ULTRASONIC 15.0M3/H DN50 / 2” M-BUS / PULSEVHU65 COMPACT ULTRASONIC 20.0M3/H DN65 / 21⁄2” M-BUS / PULSEVHU80 COMPACT ULTRASONIC 40.0M3/H DN80 / 3” M-BUS / PULSEVHU100 COMPACT ULTRASONIC 60.0M3/H DN100 / 4” M-BUS / PULSE
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 72
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
73
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Ultrasonic Heat / Energy Meters
PartNumber
Size Min Flowl/h
Nom Flowm3/h
Max Flowm3/h
775 1⁄2” DN15 6 1.5 3
775 3⁄4” DN20 10 2.5 5
775 1” DN25 24 6 12
775 11⁄4” DN32(FL) 24 6 12
775 11⁄2” DN40 40 10 20
775 2” DN50(FL) 60 15 30
775 21⁄2” DN65(FL) 100 25 50
775 3” DN80(FL) 160 40 80
775 4” DN100(FL) 240 60 120
COOLING METER OPTIONS AVAILABLE ON REQUEST
Options
240V POWER CARD
24V POWER CARD
3M LEADS (PER PAIR)
5M LEADS (PER PAIR)
10M LEADS (PER PAIR)
RS232 OUTPUT CARD
RS485 OUTPUT CARD
420MA ANALOGUE OUTPUT CARD
SPARE PULSE CARD
SPARE MBUS CARD
SHARKY 775 ULTRASONIC HEAT METERM.I.D. Approved Battery operated (10 yearbattery life). 24V and 230VAC optional cardsbelow.Pulse or MBus versions available as standard,(please specify).Units come C/W 2m pair of leads (except 15/20MN versions -which have built in flow sensor in to body) and Pockets. Fromsizes DN15-DN100. LTHW as standard.Cooling version available on request contactHeat and Combustion for prices.
KAMSTRUP 402 SERIES ENERGYMETERS(MID APPROVED)“Long life” ultrasonic heatmeter,includes meter and integrator completeas one unit, used for metering in smalland medium sized central heating plantsand district heating plants. Available in12 year battery version 24V or 230V.Electronic - Ultrasonic - Heating,Cooling and combined Heating andCooling (specify when ordering.) Battery, 230V or 24V powered, completewith pulsed output, pocket sensors &1.5m cables & probes.
Nominal Bore MinFlowm3/hr
MaxFlowm3/hr
15MM Qp0.6 0.6 1.5
15MM Qp1.5 1.5 3.0
20MM Qp2.5 2.5 5.0
25MM Qp3.5 3.5 7.0
25MM Qp6.0 6.0 12.0
40MM Qp10 10.0 20.0
50MM FLANGED Qp15.0 15.0 30.0
REDUCEDPRICE
PROJECTDISCOUNTS
ALSO AVAILABLEFOR QUANTITYCONTACT HEAT& COMBUSTIONFOR QUOTES
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 73
74
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
KAMSTRUP 602 SERIES ENERGYMETERS (MID APPROVED)Kamstrup 602 ultrasonic heating, cooling& combined heating & cooling. Battery,230V or 24VAC powered C/W 2.5m signalcables, pulsed output, pocket sensors &1.5m temp probes & sockets.Sizes 65mm-250mm (smaller sizesavailable on request, but normally offer402 version for sizes below 2” (DN50)
NominalBore
Min Flowm3/h
Max Flowm3/h
65MM-FLANGED-C Qp25 0.25 50
80MM-FLANGED-C Qp40 0.40 80
100MM-FLANGED-C Qp60 0.60 120
125MM-FLANGED-C Qp100 1.00 200
150MM-FLANGED-C Qp150 1.50 300
200MM-FLANGED-C Qp400 4.00 800
250MM-FLANGED-C Qp600 6.00 1200
OPTIONAL EXTRAS AVAILABLE ON REQUEST. I.E M-BUS,RADIO OUTPUT, LON WORKS, EXTRA CABLE LENGTH ETC
Ultrasonic Heat / Energy Meters Gas Meters
THE ELSTER RANGE OF ELSTER QA RANGE OF INLINESCREWED AND WAFER PATTERN GAS METERS C/WPULSED OUTPUTThe QA range is a turbine meter based on the rotation of animpellor, the speed of rotation being proportional to the flow rateof the gas. The meters are constructed for installation betweenflanges C/W pulsed option as standard and C/W plug & lead.Flange fixing bolt kits supplied as standard with this range.
Features• Compact gas meter• Meter sizes QA 1” - 6”• Flow ranges 6 - 1000 m3/h• Measuring range up to1:20, at higher pressuresup to 1:50
• Nominal width DN50 -DN150
• Aluminium housing• Temperature ranges QA: -10°C to +60°C
• Maintenance-free• QA: protection class IP527-digit mechanical index
• Metering accuracy in wideranges independent ofphysical characteristics ofthe gas such as density,temperature and pressure
• DVGW approved
PartNumber
Description Min Flowm3/h
Max Flowm3/h
QA65 2” PULSED 6 100
QA100 3” PULSED 10 160
QA160 3” PULSED 13 250
QA250 4” PULSED 25 400
QA400 6” PULSED 32 650
QA650 6” PULSED 50 1000
REDUCEDPRICE
REDUCEDPRICE
PROJECTDISCOUNTS
ALSO AVAILABLEFOR QUANTITYCONTACT HEAT& COMBUSTIONFOR QUOTES
NEWPRODUCT
PartNumber
Size Min Flowm3/h
Max Flowm3/h
QA 10 1” SCREWED 1.6 16
QA 16 1” SCREWED 2 25
QA 25 1” SCREWED 2.5 40
QA 40 11⁄2” SCREWED 5 65
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 74
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
75
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Gas Meters
PartNumber
Size Min Flowm3/h
Max Flowm3/h
KG2P 1⁄2” 0.016 2.5
KG4P 3⁄4” 0.025 4
BK-G4P 3⁄4” 0.04 6
BK-G6P 1” 0.06 10
BK-G10P 11⁄4” 0.10 16
BK-G16P 2” 0.16 25
BK-G25P 2” 0.22 40
DIAPHRAGM GAS METEROur range of diaphragm gas meters to measurethe volume of gas used and a pulsed signal sentdirect to a BMS system.
PartNumber
Size Min Flowm3/h
Max Flowm3/h
TBX30L-0.75 3⁄4” 1.5 30TBX30L-1 1” 1.5 30TBX30L-1.25 11⁄4” 1.5 30TBX30L-1.5 11⁄2” 1.5 30TBX100L-2 2” 5.0 100TBX150L-2 2”FL PN6* 7.5 150TBZ300L 3”FL PN6* 15 300
*C/W FLANGE FIXING KIT
REDUCEDPRICE
TURBINE GAS METERS - ELECTRONIC DISPLAY - THREADED CONNECTIONSA range of threaded connection, low pressure drop turbine gasmeters, electronic display C/W pulse and 2 metre plug and leadconnection.
MFGD DIGITAL LOW PRESSURE GAS FLOW METER SERIESThe MFGD series of Accurate Electronic meters (thermal mass version) very low pressure drop and lowstarting flow rates - pressure and temperature compensated.Sizes 11⁄4”-3”. Battery operated display, 3-4 year life (opton of replacing battery).
PartNumber
Size MinFlowm3/h
InitialFlowm3/h
MaxFlowm3/h
MF32GD10 11⁄4” (32MM) 0.1 0.05 10
MF32GD16 11⁄4” (32MM) 0.16 0.05 16
MF32GD25 11⁄4” (32MM) 0.25 0.05 25
MF50GD40 2” (50MM) 0.4 0.1 40
MF65GD65 2” (50MM) 0.65 0.1 65
MF65GD100 21⁄2” (65MM) 1.0 0.2 100
MF80GD160 3”FL (80MM) 1.6 0.2 160
NEWPRODUCT
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 75
76
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
EM21 ELECTRICITY METER
Part Number Description
EM21PULSED
ELECTRICITY METER CAN BEPROGRAMMED FOR SINGLE OR THREEPHASE WITH PULSED OUTPUT
EM21MODBUS
ELECTRICITY METER WITH PULSE ANDMODBUS OUTPUT
CT’S AVAILABLE ON REQUEST (TO SUIT) CONTACT HEAT AND COMBUSTION AS VARIOUS VERSIONS
AVAILABLE IE 5/PHASE, 3/PHASE, SPLIT CORE-MOULDED CORE
Gas Meters, Electricity Meters and Oil Meters
Part Number Size Flowrate
FB OIL METER 4 4MM 1-80 LITRES / HR
FB OIL METER 8 8MM 4-200 LITRES / HR
FB OIL METER 15 15MM 15-600 LITRES / HR
FB OIL METER 20 20MM 30-1500 LITRES / HR
FB OIL METER 25 25MM 75-3000 LITRES / HR
FB OIL METER 40 40MM 225-9000 LITRES / HR
FB OIL METER 50 50MM 750-30000 LITRES / HR
OIL METERS C/W PULSED OUTPUTThe Contoil Aquametro Range range of fuel oil meters.Applications for flow measurement for mineral oils and heatingor propellant fuels for Burners etc.
MECHANICAL TURBINE TYPE (WAFER PATTERN)The quantometer range is a turbine meter based on the rotation ofan impellor, the speed of rotation being proportional to the flowrate of the gas. The meters are constructed for installation betweenflanges C/W pulsed option as standard and C/W plug & lead.
IP 65 RATEDINLINE VERSIONS 1” - 2” (SCREWED)WAFER PATTERN 2” - 8” (FIT BETWEEN FLANGES)
PartNumber
DescriptionWafer Pattern
Min Flowm3/h
Max Flowm3/h
CPT50G40 2” PULSED 6 65
CPT50G65 2” PULSED 10 100
CPT65G65 21⁄2” PULSED 10 100
CPT65G100 21⁄2” PULSED 8 160
CPT80G100 3” PULSED 8 160
CPT80G160 3” PULSED 13 250
CPT80G250 3” PULSED 20 400
CPT100G160 4” PULSED 13 250
CPT100G250 4” PULSED 20 400
CPT100G400 4” PULSED 32 650
CPT150G400 6” PULSED 32 650
CPT150G650 6” PULSED 50 1000
CPT150G1000 6” PULSED 80 1600
CPT200G650 8” PULSED 50 1000
CPT200G1000 8” PULSED 80 1600
CPT200G1600 8” PULSED 125 2500
PartNumber
DescriptionScrewed
MinFlowm3/h
MaxFlowm3/h
CPT25SG16 1” PULSED 2.5 25
CPT25SG25 1” PULSED 4.0 40
CPT32SG25 11⁄4” PULSED 4.0 40
CPT40SG40 11⁄2” PULSED 6.0 65
CPT40SG65 11⁄2” PULSED 10 100
CPT50SG40 2” PULSED 6 65
CPT50SG65 2” PULSED 10 100
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 76
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
77
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
Room Temperature Sensors and Setpoints / Switchplates /Firemans Override Switches
Single gangDouble gangSpecial size platesSurface mountFlush mountBespoke back boxesWhite plasticBrushed Stainless steelPolished StainlesssteelPowder coated finishto RAL coloursGrid switchesRocker SwitchesMulti position RotaryswitchesKey switchesMomentary
KeyswitchesPushbuttonsL.E.D.Indicator LampsPotentiometersDrawings for approvalEngraving to CustomerrequirementsQuick delivery
Single gang KeyswitchesBreak glass EnclosuresKey lockableBespoke EnclosuresPowder coated finishBrushed Stainless steel FasciasSurface mountFlush mountBespoke back boxesKeyswitchesMulti pole / multi position RotaryswitchesL.E.D.Drawings for approvalEngraving to CustomerrequirementsQuick delivery
Room sensors and Setpoints to match the style and finish of existing Electrical switchplates
(Wandsworth, Forbes and Lomax, Focus SB, Hamilton, MK Electrical etc)
Stainless steel (Brushed, Polished)
All plated finishes (Chrome, Antique Bronze, Brushed Nickel, polished Brass etc )
Powder coated finish to RAL colours
Surface mount Detector housings
Thimble housings
Button housings
Black bulb housings
All Thermistor and BMS sensor types
Temperature / Humidity sensors
Potentiometers
0 - 10VDC setpoints
Fan Speed selector switches
Combined Air conditioning and Lighting switchplates
Drawings for approval
Engraving to Customer requirements
Quick delivery
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 77
78
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Standard Terms & Conditions of SaleDa
tash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
DEFINITIONS:(a) “Goods” means the Goods or services which the Company is to supply in
accordance with these terms.(b) “Company” means HEAT & COMBUSTION LTD.(c) “Terms and Conditions” means the terms and conditions of sale set out
below and the Company’s “Your HEAT & COMBUSTION Account” documentand any specific terms and/or conditions agreed in writing between theCustomer and the Company. In the event of conflict, the terms in thisdocument shall take precedence.
(d) “Contract” means the Contract for the purchase and sale of Goods.(e) “Writing” includes communication by post, facsimile, e-mail and by personal
delivery of documents.(f) “Acceptance” means confirmation in writing by the Company upon receipt
of the Customer’s order.(g) “Customer” means the person, firm or company described overleaf and who
purchases the Goods or Service from the Company.1. APPLICATION(a) Unless otherwise specifically agreed in writing these Conditions shall be
incorporated in every offer quotation acceptance and contract for the saleor supply of goods or services by the Company and together with the orderto which they relate constitute the entire contract between the Companyand the Customer. Any conditions proposed by the Customer which areinconsistent with these terms are hereby excluded (including any termsor conditions which the Customer purports to apply under purchase order,confirmation of order, specification or other document).
(b) These conditions apply to all the Company’s sales and any variation tothese conditions and any representation about the Goods or services shallhave no effect unless expressly agreed in writing by a director of theCompany. The Customer acknowledges that it has not relied on anystatement, promise or representation made or given by or on behalf of theCompany which is not set out in the Contract. Nothing in this conditionshall exclude or limit the Company’s liability for fraudulentmisrepresentation.
(c) The Customer shall ensure that the terms of its order and any applicablespecification are complete and accurate.
2. ACCEPTANCE(a) All quotations are given subject to confirmation in writing by the Company
upon receipt of the Customer's order and no contract shall be concludeduntil such confirmation is given or the Customer's order is otherwiseaccepted. Unless otherwise stated in writing by the Company each orderwhen accepted constitutes a separate contract.
(b) The quality and description of the Goods shall be as set out in theCompany’s quotation or acknowledgement of order.
(c) All samples, drawings, descriptive matter, specifications and advertisingissued by the Company and any descriptions or illustrations contained inthe Company’s catalogues or brochures are issued or published for thesole purpose of giving an approximate idea of the Goods described inthem. They shall not form part of the Contract and this is not a sale bysample.
3. PRICES(a) Prices quoted are exclusive of VAT (unless otherwise stated) and are those
in force at the date of quotation. Unless otherwise stated in the quotation(if any) given by the Company they may be varied at any time beforedelivery of the Goods or before performance of the Services provided theprices may be varied after a contract has become binding only by reasonof an increase in the cost of the Company of raw materials or labour or byreason of a fluctuation in exchange rates.
(b) If prices are varied after a contract has become binding the Company shallgive the Customer written notice of such variation and on receipt of suchnotice the Customer may cancel his order. In a case where goods are tobe delivered or services are to be supplied in instalments the Customermay cancel payments only for the undelivered goods or the unperformedpart of the Services. If the order is not cancelled the Customer shall bebound to pay the increased or varied price in respect of the goodsdelivered or Services performed after such notice is received. To beeffective cancellations must be in writing and must be received by theCompany either within fourteen days of the date in which such notice wassent or at least twenty-eight days before delivery or performance is due,whichever is the sooner.
(c) Unless otherwise expressly agreed prices quoted are ex works and excludeall cost of packaging and delivery from the Company's premises but thesemay be charged as extras.
(d) Any variation or amendment requested by the Customer will only be validand binding on the Company when subject to a change order relating tothe order duly placed upon and accepted by the Company in writing andsigned by a duly authorised representative, and subject to appropriateadjustment in price, delivery dates and other matters.
(e) Unless otherwise expressly agreed in the case of export sales, pricesquoted also exclude all overseas taxes and tariffs and all costs of deliverywhich will be the responsibility of the Customer.
4. DELIVERY(a) Delivery or periods are only best estimates and the Company is not liable
for the consequences of any delay. Accordingly, time shall not be of theessence in making deliveries.
(b) Unless otherwise agreed in writing by the Company, delivery of the Goodsshall take place at the Company’s place of business.
(c) Any delivery or performance period begins on the date of the Companyacceptance of the Customer's order or (if later) when the Companyreceives from the Customer any further information which it may requireto proceed with the contract. The Customer agrees to supply suchinformation promptly and to accept the Goods within the delivery orperformance schedule or timetable specified in the contract and to giveany necessary instructions for delivery or performance accordingly.
(d) Where the Company has agreed to deliver the Goods, the Customer shallin all cases other than export sales provide the labour necessary to theCompany to unload and stack free of charge to the Company and shallensure that the delivery vehicle is unloaded within a reasonable time andshall indemnify the Company against any loss or damage arising duringunloading.
(e) If for any reason the Customer fails to accept delivery of any of the Goodswhen they are ready for delivery, or the Company is unable to deliver theGoods on time because the Customer has not provided appropriateinstructions, documents, licences or authorisations:(i) risk in the Goods shall pass to the Customer (including for loss or
damage caused by the Company's negligence);(ii) the Goods shall be deemed to have been delivered; and the Company
may store the Goods until delivery, whereupon the Customer shall beliable for all related costs and expenses (including, without limitation,storage and insurance).
(f) If the Company delivers to the Customer a quantity of Goods of up to 5%more or less than the quantity accepted by the Company, the Customershall not be entitled to object to or reject the Goods or any of them byreason of the surplus or shortfall and shall pay for such goods at the prorata Contract rate.
(g) Any typographical, clerical error or other omission in documents issuedby the Company shall be subject to correction by the Company withoutliability on the part of the Company.
(h) The Customer must examine the Goods immediately upon delivery andwithin 7 days thereafter notify the Company in writing of any defects, andreturn any allegedly defective part or parts of the Goods to the Companyor as the Company shall direct at the Customer’s expense within 18 daysof delivery and pay to the Company the costs of any tests carried out tosuch part or parts (such cost to be certified by the Company) togetherwith the costs of return thereof to the Company in the event that no liabilityattaches to the Company in respect of defects. Where damage occurs, notapparent on reasonable inspection, the Customer must notify the Companywithin 7 days within the discovery of any such damage. In default theCustomer will be deemed to have examined and accepted the Goods.
(i) The Company shall not be liable for any loss or damage caused by orresulting from any variation (for whatever reason) in the specifications ortechnical data of any outside manufacturer or for any loss or damagearising out of curtailment or cessation of supply following such variation.
(j) The Company will repair or at its option replace free of charge any part ofthe Goods lost or damaged in transit provided that (if the Companyappoints the carrier) the Company and the carrier are given written noticeof such loss or damage within the time required by the carrier's Conditionsof Carriage. Alternatively where delivery is made by the Company’s owntransport the Company should be given written notice within three days ofthe arrival of the Goods or in the case of non-delivery within fourteen days
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 78
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
79
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
of despatch.This clause shall not apply to export sales.
(k) The quantity of any consignment of Goods as recorded by the Companyon despatch from the Company's place of business shall be conclusiveevidence of the quantity received by the Customer on delivery unless theCustomer can provide conclusive evidence proving the contrary.
5. RISK / TITLE(a) The Goods are at the risk of the Customer from the time of delivery.(b) Ownership of the Goods shall not pass to the Customer until the Company
has received in full (in cash or cleared funds) all sums due to it in respectof:(i) the Goods; and(ii) all other sums which are or which become due to the Company from
the Customer on any account.(c) Until ownership of the Goods has passed to the Customer, the Customer
shall:(i) hold the Goods on a fiduciary basis as the Company's bailee;(ii) store the Goods (at no cost to the Company) separately from all other
goods of the Customer or any third party in such a way that they remainreadily identifiable as the Company's property;
(iii) not destroy, deface or obscure any identifying mark or packaging onor relating to the Goods; and
(iv) maintain the Goods in satisfactory condition and keep them insuredon the Company's behalf for their full price against all risks to thereasonable satisfaction of the Company. On request the Customer shallproduce the policy of insurance to the Company.
(d) The Customer may resell the Goods before ownership has passed to itsolely on the following conditions:(i) any sale shall be effected in the ordinary course of the customer's
business at full market value; and(ii) any such sale shall be a sale of the Company's property on the
Customer’s own behalf and the Customer shall deal as principal whenmaking such a sale.
(e) The Customer's right to possession of the Goods shall terminateimmediately if:(i) the Customer has a bankruptcy order made against him or makes an
arrangement or composition with his creditors, or otherwise takes thebenefit of any statutory provision for the time being in force for the reliefof insolvent debtors, or (being a body corporate) convenes a meetingof creditors (whether formal or informal), or enters into liquidation(whether voluntary or compulsory) except a solvent voluntaryliquidation for the purpose only of reconstruction or amalgamation, orhas a receiver and/or manager, administrator or administrative receiverappointed of its undertaking or any part thereof, or documents are filedwith the court for the appointment of an administrator of the Customeror notice of intention to appoint an administrator is given by theCustomer or its directors or by a qualifying floating charge holder (asdefined in paragraph 14 of Schedule B1 to the Insolvency Act 1986), ora resolution is passed or a petition presented to any court for thewinding-up of the Customer or for the granting of an administrationorder in respect of the Customer, or any proceedings are commencedrelating to the insolvency or possible insolvency of the Customer; or
(ii) the Customer suffers or allows any execution, whether legal orequitable, to be levied on his/its property or obtained against him/it, orfails to observe or perform any of his/its obligations under the Contractor any other contract between the Company and the Customer, or isunable to pay its debts within the meaning of section 123 of theInsolvency Act 1986 or the Customer ceases to trade; or
(iii) the Customer encumbers or in any way charges any of the Goods.(f)The Company shall be entitled to recover payment for the Goodsnotwithstanding that ownership of any of the Goods has not passedfrom the Company.
(g) The Customer grants the Company, its agents and employees anirrevocable licence at any time to enter any premises where the Goods areor may be stored in order to inspect them, or, where the Customer's rightto possession has terminated, to recover them.
(h) Where the Company is unable to determine whether any Goods are thegoods in respect of which the Customer's right to possession has
terminated, the Customer shall be deemed to have sold all goods of thekind sold by the Company to the Customer in the order in which they wereinvoiced to the Customer.
(i) On termination of the Contract, howsoever caused, the Company's (butnot the Customer's) rights contained in this condition 5 shall remain ineffect.
6. LAWThe validity construction and performance of any contract to which theseconditions apply shall be governed by the law of England and any disputes shallbe submitted to the English Courts.7. PAYMENT(a) Subject to the establishment of an approved credit account, payment by
the Customer is due within 30 (thirty) days of the date of the invoice.(b) If the Customer fails to pay the Company by the due date the Company
may either suspend all further deliveries or performance of Services untilpayment is made in full or cancel the order and subsequent orderedinsofaras goods remain to be delivered or Services remain to be performedthereunder.
(c) The Company reserves the right to charge interest when payment has notbeen made on the due date at the rate (both before and after judgement)or two per cent above Bank base rate for the time being calculated on theoutstanding balance from the due date for payment down to receipt by theCompany of payment.
(d) Any sums paid by deposit, retainer or prepayment are not refundable inthe event of a Customer cancelling an order. The Company reserves theright at any time and it’s discretion to demand security for payment beforecontinuing with or delivering any order.
(e) Payment of the price for the Goods is due in pounds sterling.(f) No payment shall be deemed to have been received until the Company has
received cleared funds.(g) All payments payable to the Company under the Contract shall become
due immediately on its termination despite any other provision.(h) The Customer shall make all payments due under the Contract in full
without any deduction whether by way of set-off, counterclaim, discount,abatement or otherwise unless the Customer has a valid court orderrequiring an amount equal to such deduction to be paid by the Companyto the Customer.
8. GUARANTEE OF QUALITY(a) The Company shall have the right, whether before or after the date of the
order, to alter the specification of the Goods or any part thereof providedthat such alterations shall not adversely affect the performance of theGoods.
(b) Where the Company is not the manufacturer of the Goods, the Companyshall endeavour to transfer to the Customer the benefit of any warranty orguarantee given to the Company.
(c) The Company warrants that (subject to the other provisions of theseconditions) on delivery, and for a period of 24 months from the date ofdelivery, the Goods shall be of satisfactory quality within the meaning ofthe Sale of Goods Act 1979.
(d) The Company shall not be liable for a breach of the warranty in condition8 (c) unless the Company is given a reasonable opportunity after receivingthe notice of examining such Goods and the Customer (if asked to do soby the Company) returns such Goods to the Company's place of businessat the customers cost for the examination to take place there.
(e) The Company shall not be liable for a breach of the warranty in condition8 (c) if:(i) the Customer makes any further use of such Goods after giving such
notice; or(ii) the defect arises because the Customer failed to follow the Company's
oral or written instructions as to the storage, installation,commissioning, use or maintenance of the Goods or (if there are none)good trade practice; or
(iii) the Customer alters or repairs such Goods without the written consentof the Company.
(f) Subject to condition 8 (d) and condition 8 (e), if any of the Goods do notconform with the warranty in condition 8 (c) the Company shall at its optionrepair or replace such Goods (or the defective part) or refund the price ofsuch Goods at the pro rata Contract rate provided that, if the Company so
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 79
80
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datash
eets are ava
ilable to dow
nloa
d from
our w
ebsite w
ww.
heatco
mbu
stion.co
.uk or by sc
anning
the QR
cod
e
requests, the Customer shall, at the Company’s expense, return the Goodsor the part of such Goods which is defective to the Company.
(g) If the Company complies with condition 8 (f) it shall have no further liabilityfor a breach of the warranty in condition 8(c) in respect of such Goods.
9. USE OF THE GOODSWhere the Goods are plant for use or operation at work (or are components forsuch plant) it is the Customer's responsibility to ensure that proper standardsof safety are maintained in using the Goods and (without limitations) to pass onall instructions regarding such use to personnel and to arrange for their trainingin such use where appropriate. This obligation shall extend to taking allreasonable steps to ensure compliance with the Health and Safety at Work etc.Act 1974 in the event of sale on or other supply by the Customer.10. INTELLECTUAL PROPERTY(a) The Company will indemnify the Customer against any claim for
infringement of Letters Patent Registered Design Trade Mark or Copyright(“Intellectual Property Rights”) by the use or sale of any of the Goodsagainst all costs and damages which the Customer may incur in any actionfor such infringement or for which the Customer may become liable in anysuch action. Provided always that this indemnity shall not apply toanyinfringement which is due to the Company having followed anyinstructions furnished or given by the Customer or to the use of suchGoods in a manner or for a purpose or in a foreign country not specifiedby or disclosed to the Company or to any infringement which is due to theuse of the Goods in association or combination with any other goods notsupplied by the Company. And provided also that this indemnity isconditional upon the Customer giving to the Company notice within 7 daysin writing of any claim being made or action threatened or brought againstthe Customer and on the Customer permitting the Company at theCompany's own expense to conduct any litigation that may ensue and allnegotiations of the claim. The Customer warrants that any instructionfurnished or given by it shall not be such as will cause the Company toinfringe any intellectual Property Rights.
(b) The Customer shall indemnify the Company for any loss damage expenseor liability in any suit or proceeding based upon any claim for theinfringement of Intellectual Property Rights brought against the Companyresulting from the Company's compliance with the Customer's designsor specifications and for any such infringement involving any marking orbranding applied by the Company at the request of the Customer.
11. LIABILITY(a) Subject to condition 11(b) and condition 11 (c), the following provisions
set out the entire financial liability of the Company (including any liabilityfor the acts or omissions of its employees, agents and sub-contractors)to the Customer in respect of:(i) any breach of these conditions;(ii) any use made or resale by the Customer of any of the Goods, or of any
product incorporating any of the Goods; and(iii) any representation, statement or tortious act or omission including
negligence arising under or in connection with the Contract.(b) All warranties, conditions and other terms implied by statute or common
law (save for the conditions implied by section 12 of the Sale of GoodsAct 1979) are, to the fullest extent permitted by law, excluded from theContract.
(c) Nothing in these conditions excludes or limits the liability of the Company:(i) for death or personal injury caused by the Company's negligence; or(ii) for any matter which it would be illegal for the Company to exclude or
attempt to exclude its liability; or(iii) for fraud or fraudulent misrepresentation.
(d) Subject to conditions 9(b) and 9(c)(i) the Company's total liability in contract, tort (including negligence or
breach of statutory duty), misrepresentation, restitution or otherwise,arising in connection with the performance or contemplatedperformance of the Contract shall be limited to the Contract price; and
(ii) the Company shall not be liable to the Customer for loss of profit, lossof business, or depletion of goodwill in each case whether direct,indirect or consequential, or any claims for consequentialcompensation whatsoever (howsoever caused) which arise out of orin connection with the Contract.
12. FORCE MAJEURE(a) The Company shall not be liable to the Customer to the extent that
fulfilment of its obligations to the Customer has been prevented hinderedor delayed by force majeure as herein defined.
(b) For the purpose of this Condition force majeure shall mean anycircumstance beyond the control of the Company and shall include(without limitation):(i) Riot civil commotions war rebellion national or international emergency
strikes lockouts or other labour disputes.(ii) Destruction or damage due to natural cause floods fires explosions or
breakdown of machinery.(iii) Any order of a local national or international authority.(iv) Shortage of labour equipment materials or supplies.(v) Transportation embargoes of failure or delays in transport.
13. REGULATIONSThe Customer warrants that it has complied with every applicable lawfulrequirement or instruction and (without Limitation) that it has obtained everynecessary licence permit or authority that may be required in connection withthe supply of Goods and Services to be carried out hereunder.14. DEFAULT INSOLVENCYIf the Customer shall commit a breach of any of its obligations to the Companyunder this or any other contract or if any distress or execution shall be leviedupon the Customer's property or assets or if the Customer shall make or offerany arrangement or composition with creditors or commit any act of bankruptcyor if any petition or receiving order in bankruptcy shall be presented or madeagainst him or (being a limited company) any resolution or petition for windingup shall be passed or presented (other than for the purpose of amalgamation orreconstruction) or if a receiver or administrator of its undertaking property orassets or any part thereof shall be appointed then the Company may withoutnotice:(a) suspend or determine the contract or any unfulfilled part thereof: and(b) stop any goods in transit; and(c) recover any Goods from the Customer's premises for which payment has
not been made in full without prejudice to any other right or remedy whichthe Company may lawfully enforce or exercise. Any cost incurred by theCompany during the process of recovering Goods from the Customer’spremises for which payment has not been made in full, would be regardedas the debt of the Customer to the Company.
15. GENERAL(a) The Customer shall not assign its interest in the Agreement without the
written consent of the Company.(b) Each right or remedy of the Company under the Contract is without
prejudice to any other right or remedy of the Company whether under theContract or not.
(c) If any provision of the Contract is found by any court, tribunal oradministrative body of competent jurisdiction to be wholly or partly illegal,invalid, void, voidable, unenforceable or unreasonable it shall to the extentof such illegality, invalidity, voidness, voidability, unenforceability orunreasonableness be deemed severable and the remaining provisions ofthe Contract and the remainder of such provision shall continue in fullforce and effect.
(d) Failure or delay by the Company in enforcing or partially enforcing anyprovision of the Contract shall not be construed as a waiver of any of itsrights under the Contract.
(e) Any waiver by the Company of any breach of, or any default under, anyprovision of the Contract by the Customer shall not be deemed a waiverof any subsequent breach or default and shall in no way affect the otherterms of the Contract.
(f) The parties to the Contract do not intend that any term of the Contract shallbe enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999by any person that is not a party to it.
Heat and combustion 2015 NO PRICE 1a:Layout 1 15/03/2015 12:21 Page 80
Heat & Combustion Supplies Tel: (029) 20 463345 Fax: (029) 20 463346 Email: [email protected] information is believed to be correct at time of going to press. Heat and Combustion take no responsibility for errors in printing. Colours may vary from items illustrated due to the constraints of the printing process. Prices and availability are subject to change without notice.
Datasheets are available to download from our website www.heatcombustion.co.uk or by scanning the QR code
IP Rating Chart
(live or moving)indicates hazardous partsThe "flash" symbol
1000mm MIN
150mm MIN
indicated by the IP code.Protection of persons and protection of equipment
by the IP codes two:for electrical equipment is indicatedProtection provided by enclosures
objects. (see AS 1939, Clause 5)against ingress of solid foreignand protection of equipmentaccess to hazardous parts,protection of persons againstThe first numeral indicates
(see AS 1939, Clause 6)harmful ingress of water.protection of equipment againstThe second numeral indicates
X
0
1
2
3
4
5
6
X
1
2
3
4
5
6
7
8
0
(untested)Protection unspecified
(untested)Protection unspecified
Non-protected Non-protected
falling vertically.Protection against drops of water
position (in any direction)is tilted up to 15fl from its normalfalling vertically when the objectProtection against drops of water
at up to 60fl from the vertical.Protection against spraying water
directions.spraying water from all practicableProtection against splashing and
directions.jets of water from all practicableProtection against low pressure
practicable directions.strong jet of water from allProtection against heavy seas or a
immersion.Protection against temporary
than second numeral 7)agreement, but no less severesubmersion (tests subject toProtection against continuous
than 50mm.of equipment against objects largerhazardous parts, and protectionagainst accidental access toProtection of the back of the hand
than 12.5mm.equipment against objects larger thanto hazardous parts, and protection ofProtection of fingers against access
objects larger than 2.5mm (e.g. ball bearings)and protection of equipment againstor wires (larger than 2.5mm diameter),Protection of persons holding tools
objects larger than 1mm. (e.g. ball bearings)and protection of equipment againsttools or wires (larger than 1mm diameter),Protection of persons holding small
satisfactory operation of equipment.sufficient quantity to interfere withProtection against entry of dust in
entry of dust.Complete protection against
CHARACTERISTIC NUMERALS
IP
15
30
HEAT & COMBUSTION SUPPLIES UNIT E5, SOUTH POINT INDUSTRIAL
ESTATE, FORESHORE ROAD, CARDIFF
BAY, CARDIFF, CF10 4SP
Tel: (029) 20 463345 Fax: (029) 20 463346
Email: [email protected]
Web: www.heatcombustion.co.uk