d e s c r i p t i o n

Halo LED 900 Series Emergency Backup LED Modules are 120V LED downlights for Non-IC normal and emergency backup applications. The Halo LED ML7098xxT120DEM series modules are designed to provide Emergency lighting backup when used with H750TEM912 dedicated Non-IC housing that includes the LED Emergency Battery Backup Driver. The ML7098xxT120DEM series is designed for dimming capability in normal operation with 120V dimmers. Halo offers high quality downlighting with the high efficacy of LED – the result is great lighting and significant energy savings.

MecHAnicALHeat s inkUpper Heat s ink• Durable extruded aluminum construction.• Conducts heat away from the LED keeping the junction temperatures below specified maximums.Lower Heat s ink • Durable die-cast aluminum construction.• Precision keyed bosses designed to lock with matching keyed slots in trim rings.• Works in conjunction with the upper heat sink for heat conduction away from the LED.

MoUntinGtors ion spr ings• Formed steel springs provide secure retention of the ML7 series of LED modules in 6” compatible housings with properly positioned and sized torsion bracket tabs.

compat ib i l i ty• The ML7098xxT120DEM Series of LED modules are designed for use in the dedicated H750TEM912 Non-IC housing. The H750TEM912 includes emergency connection with the emergency battery backup LED driver installed on the housing.

eLectricALLed Module connect ionspower : Halo LED module installs with a plug-in line voltagewiring connector (UL and CSAListed Luminaire Disconnect). This non-screw-base connectionpreserves the high efficacy ratingand prevents use of low efficacysources. Note: ML7098xxT120DEM LED series normal power driver is 120V, and for emergency applications the LED Emergency Backup driver

as installed on the H750TEM912 must also be operated 120V.

dimming: The ML7098xxT120DEM series is designed for dimming capability to 15% in normal operation with standard 120V LED-Rated, electronic low voltage, and many incandescent dimmers. The LED module may also dim to 5% using dimmers with low end trim adjustment. (Consult dimmer manufacturer for application/compatibility. Note, some dimmers require a neutral in the wallbox).

emergency Backup: The emergency connection is a plug-in wiring connector with mating connection between the H750TEM912 emergency housing and the ML7098xxT120DEM series LED Emergency Modules.

Led driver• For normal power operation the LED module has an integral high efficiency driver with a power factor of >.90 and 120V input power, 50/60Hz. Driver has integral thermal protection in the event of over temperature or internal failure• Driver is rated 120V, and for emergency applications the LED Emergency Backup driver included on the H750TEM912 housing must also be operated from 120V emergency circuit (qualified electrician must ensure appropriate installation per applicable national and local codes).

Warranty• Cooper Lighting provides a three year limited warranty on the Halo LED Luminaire which includes the LED Module, LED Recessed Housing and LED trims.

• As with any electrical installation, a qualified electrician must ensure compatibility of use with a particular electrical and ceiling system; this includes all applicable national and local electrical and building codes.

compl ianceLabels• UL/cUL Listed• UL/cUL Damp Location Listed• UL/cUL Wet Location, Protected Ceiling Listed and IP66 rated with designated trims• RoHS Compliant• Non-IC listed

Qualification• Can be used to meet High Efficacy luminaire requirements (when used with designated trims): - ENERGY STAR® SSL - State of California Title 24 High Efficacy LED - International Energy Conservation Code (IECC) High Efficacy

Air-tite compliant• Washington State Energy Code• New York State Energy Conservation Construction Code• Certified Under ASTM-E283

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

s p e c i F i c A t i o n F e A t U r e s

ML709840T120DEM

900 Series 4000°K LED Module with

Emergency Backup Connections

For Use With H750TEM912

Emergency LED Housing Only

and

49x Halo LED Series Trims

FOR USE IN NON-

INSULATED CEILINGS

High Efficacy LED

Housing

ADV110437rev 8/17/2011

Qualified and Compliant as designated. Refer to trim

selection for compliant models.

energy data - normal power*(Values at non-dimming line voltage)Minimum Starting Temp: -30°C (-22°F)EMI/RFI: FCC Title 47 CFR, Part 18, Class B

(Consumer)Sound Rating: Class A standards*Input Voltage: 120VPower Factor: >0.90Input Frequency: 50/60HzTHD: <20%Rated Wattage: 15W max. Input Power: 14.3WInput Current: 130mAMaximum Non-IC Ambient ContinuousOperating Temperature 40°C (104°F)* Refer to Emergency Backup Driver Energy Data Included with Housing Specifications H750TEM912

900 series Led Modules Lighting data normal power:

Lumens: . . . . . . . . . . . . . . . . .511-945(depending upon trim and CCT)Lumens per watt: . . . . . . . . . . up to 63Watts at 120VAC: . . . . . . . . . . . . . 14.3ColorCorrelated Color Temperature (CCT): . . . . . . 2700-4000KColor Rendering Index (CRI, Ra): . . . . . . 80

6-3/16˝157mm

5-3/4˝146mm

900 Series / 1200 Series

2700°K nominal

2700K

2725

3000K 3500K 4100K 5000K 6500K

3000°K nominal

2700K

3045

3000K 3500K 4100K 5000K 6500K

3500°K nominal

2700K

3465

3000K 3500K 4100K 5000K 6500K

4000°K nominal

2700K

3985

3000K 3500K 4100K 5000K 6500K

ML709840T120DEM

M L 7 0 9 8 4 0 T 1 2 0 D E M

493ps06regressed solite® Lensed

White reflector with White trim ring

description: Led trimsMultiple reflector and baffle options allow the Halo LED recessed luminaire to be used in many interior spaces. Choose the best reflector finish and trim for the interior space. Aesthetically pleasing regressed shower trims are available for applications requiring wet location listings.

493ps06 solite® regressed Lens with White reflector

and White trim ring• Halo matte white finish die-cast trim ring• Halo matte white aluminum reflector• Solite® glass lens offers diffusion with high lumen transmission• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated

495WW06Wall Wash with

semi-specular clear reflector and White trim ring

495WW06 Wall Wash with semi-specular clear reflector• Wall wash optics with downlight performance• Semi-specular clear reflector• Specular wall wash “Kick” reflector for high-angle vertical illumination• Diffusing lens for smooth beam• Halo matte white trim ring

495pWW06Wall Wash with

White reflector and White trim ring

495pWW06 Wall Wash with White reflector

optic, diffusing Lens with White trim ring• Wall wash optics with downlight performance• White reflector• Specular wall wash “Kick” reflector for high-angle vertical illumination• Diffusing lens for smooth beam• Halo matte white trim ring

HALO®

494p06 White reflector with White trim ring• Halo matte white finish die-cast trim ring• Halo matte white aluminum reflector• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket

for AIR-TITE™ seal

494sc06 specular reflector with White trim ring• Halo matte white finish die-cast trim ring• Specular Clear aluminum reflector• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

494H06 Haze reflector with White trim ring• Halo matte white finish die-cast trim ring• Haze aluminum reflector• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

494WB06 White Baffle with White trim ring• Halo matte white finish die-cast trim ring• Halo Matte White die-cast baffle• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

494p06 White reflector

with White trim ring

494sc06 specular reflector

with White trim ring

494H06 Haze reflector

with White trim ring

494WB06 White Baffle

with White trim ring

493WBs06 solite® regressed Lens with White Baffle and White trim ring• Halo matte white trim ring and baffle• Upper specular aluminum reflector for optical control and

enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum baffle and trim ring• Trim height of .160” at OD & .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

493WBs06regressed solite® Lensed

White Baffle with White trim ring

1-1/2˝[38mm]

M L 7 0 9 8 4 0 T 1 2 0 D E M

492ps06 Frost Lensed trim with White Baffle and trim ring• Halo Matte White trim ring and baffle, regressed lens• Wet location listed for use in showers and protected

canopy applications• Die-cast aluminum baffle and die-cast trim ring• Frosted glass lens• Trim height of .160” at OD & .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

Accessory:494OPTIC - over optic lens

Accessory:494OPTIC - over optic lens

Accessory:494OPTIC - over optic lens

Accessory:494OPTIC - over optic lens

492ps06 Frost Lensed White Baffle

with White trim ring

493scs06 solite® regressed Lens with specular clear

reflector and White trim ring• Halo matte white trim ring with specular clear reflector• Upper specular aluminum reflector for optical control

and enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum reflector and trim ring• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

493scs06regressed solite® Lensed

specular reflector with White trim ring

493Hs06regressed solite® Lensed

Haze reflector with White trim ring

493sns06regressed solite® Lensed

satin nickel reflector with satin nickel

trim ring

493sns06 solite® regressed Lens with satin nickel

reflector and satin nickel trim ring• Halo Statin Nickel trim ring with Satin Nickel reflector• Upper specular aluminum reflector for optical control

and enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum reflector and trim ring• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

493tBZs06regressed solite® Lensed

tuscan Bronze reflector with tuscan Bronze

trim ring

493tBZs06 solite® regressed Lens with tuscan Bronze

reflector and tuscan Bronze trim ring• Halo Tuscan Bronze trim ring with Tuscan Bronze reflector• Upper specular aluminum reflector for optical control

and enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum reflector and trim ring• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

493BBs06regressed solite® Lensed

Black Baffle withWhite trim ring

493BBs06 solite® regressed Lens with Black Baffle

and White trim ring• Halo matte white trim ring with Black Baffle• Upper specular aluminum reflector for optical control

and enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum baffle and trim ring • Trim ring height of .160” at OD and .180” at ID • Provides clearance for remodeler flange and gasket

for AIR-TITE™ seal

493Hs06 solite® regressed Lens with Haze reflector

and White trim ring• Halo matte white trim ring with Haze reflector• Upper specular aluminum reflector for optical control

and enhanced lumen delivery• Wet location listed for use in showers and protected

canopy applications; and IP66 Ingress Protection rated• Die-cast aluminum reflector and trim ring• Trim ring height of .160” at OD and .180” at ID• Provides clearance for remodeler flange and gasket for

AIR-TITE™ seal

HALO® M L 7 0 9 8 4 0 T 1 2 0 D E M

M L 7 0 9 8 4 0 T 1 2 0 D E M

HALO®

494opticLens over-optic for

open Led trims

oversize ringsFor use when ceiling opening is irregular or cut too large. The oversized ring is installed behind the Halo LED trim ring to mask irregularities or cutout errors of the ceiling opening.• OT400P = Oversize White Metal Trim Ring 6” ID x 9-1/4” OD • OT403P = Oversize White Plastic Trim Ring 6” ID x 8” OD

oversize Led trim ringFor use when ceiling opening is irregular or cut too large.• OT490WH = LED Oversize White Die-Cast Aluminum Trim Ring 5-1/8” ID x 9-1/4” OD - attaches to LED module, substitute for standard LED trim ring.

ot400p, ot403p, ot490WH oversize trim rings

OT490WH

OT400P

OT403P

trM490 thin profile trim ring (optional Accessory)• Die-cast trim ring• Thin trim ring provides a more subtle ceiling appearance• Purchase as accessory and discard ring supplied with trim• Trim ring height of .120” at OD and .180” at ID - TRM490BK = Black - TRM490PC = Polished Chrome - TRM490SN = Satin Nickel - TRM490TBZ = Tuscan Bronze - TRM490WH = White

trM490 optional Accessory

thin profile trim ring1/8” [3mm]

7-1/4”[184mm]

494optic Lens over-optic for open Led trimsOptional accessory - diffusing lens drops into top of open 494 Series LED trims.

Precision formed lens media provides diffusion of LED source brightness.

compatible with: 494SC06, 494H06, 494P06, 494WB06

L e n s O p e n Tr i m

spacing

spacing

spacing

6´-0˝

Hallway

HaloLED

Downlights

EmergencyBackup

9´-0˝

900 Series LEDML709840T120DEM 4000°K LED Emergency Module

494SC06 Open Reflector, Specular Clear

H750TEM912 6" Halo LED Emergency Housing - 900/1200 Series with EM Battery Pack (Integal to housing)

ML709840T120DEM Fixture Spacing O.C.

Floor Illuminance (fc) 6'-0" 8'-0" 10'-0"

Average 9.46 7.11 5.86

Maximum 10.87 8.23 6.59

Minimum 4.39 3.73 3.62

Avg/Min 2.37 2.10 1.78

Max/Min 2.72 2.43 2.00

Total Delivered Lumens: 649

Note: 1. This application example is provided to represent typical fixture performance. Field results may vary. 2. Values scaled from baseline Test No. SP20049. Test Model: ML709830T120DEM-494SC06-H750TEM912 Factor used to scale 3000K baseline test model to 4000K model: 1.0977

pHotoMetrY - eMerGencY Mode, BAtterY poWer

For typical photometric results under normal power load, refer to ML709840icAt120d-494sc06 photometric file online at www.cooperlighting.com.

Hallway example - 9’-0” Ceiling - 6’-0” Width - 80/50/20 Reflectance

orderinG inForMAtion

M L 7 0 9 8 4 0 T 1 2 0 D E M

H750= LED Housing with LED connections (high efficacy compliant)

TEM912= 6˝ Dedicated LED Non-IC listed, AIR-TITE, New Construction Housing for Halo LED 900 Series and 1200 Series dedicated Emergency Modules, with prewired connections for LED power, and Emergency Backup from emergency driver included on housing. (A connector for 1200 Series 0-10V dimming is in the H750TEM912 housing - this connector is not for use with 900 Series LED modules).

Emergency Backup Housing

H750 TEM912

ML709= LED Module, 900 Series

ML7098xxT120DEM

8= 80 CRI Nominal CCT27= 2700°K30= 3000°K35= 3500°K40= 4000°K

T120D=Non-IC Listed, 120V for standard 120V dimming

EM=Emergency Connection for mating connection with the H750TEM912 emergency housing

ML7 LED 600 Series Modules

ML709 8 T120D EM

494P06 White Reflector and white trim ring494WB06 White Baffle and white trim ring494H06 Haze Reflector and white trim ring494SC06 Specular Clear Reflector and white trim ring492PS06 Frost Lens, white baffle and trim ring, Shower rated493WBS06 Solite® Regressed Lens, upper specular reflector, White baffle and trim ring, Shower rated493SCS06 Solite® Regressed Lens, upper specular reflector, Specular Clear reflector and white trim ring, Shower rated493HS06 Solite® Regressed Lens, upper specular reflector, Haze reflector, and white trim ring, Shower rated493SNS06 Solite® regressed Lens, upper specular reflector, Satin Nickel reflector and trim ring, Shower rated493TBZS06 Solite® Regressed Lens, upper specular reflector, Tuscan Bronze reflector and trim ring, Shower rated493BBS06 Solite® Regressed Lens, Black baffle with white trim ring, Shower rated493PS06 Solite® Regressed Lens, upper specular reflector, White reflector and trim ring, Shower rated495WW06 Wall wash with semi-specular clear reflector, specular kick reflector and lens, white trim ring495PWW06 Wall wash with white reflector, specular kick reflector and lens, white trim ring491WBS06 Polymer Lensed Trim, White Baffle & Ring Non-electrically conductive (plastic) front, Shower rated

H7 LED Downlight Trims H7 LED Trims Accessories

494OPTIC 6" Over-Optic Diffuse Lens for use with Open LED Trims (494 family), Shower rated.

Oversize Trim RingOT490WH 6" Oversize white die-cast trim ring 9-1/4" O.D. Attaches to LED module, substitute for standard trim ring shipped with trims.

OT403P Oversize White Plastic Ring, 6" I.D. x 8" O.D.Ring slips behind standard LED trim ring.

OT400P Oversize White Metal Ring, 6" I.D. x 9-1/4" O.D.Ring slips behind standard LED trim ring.

Designer Trim Rings, Thin Profile TRM490WH White die-cast trim ringTRM490SN Satin Nickel die-cast trim ringTRM490TBZ Tuscan Bronze die-cast trim ringTRM490BK Black die-cast trim ringTRM490PC Polished Chrome die-cast trim ring

S A M P L E N U M B E R :C o m p l e t e u n i t i n c l u d e s H a l o L E D 9 0 0 S e r i e s E m e r g e n c y M o d u l e M L 7 0 9 8 x x T 1 2 0 D E M , w i t h H a l o L E D 4 9 x s e r i e s t r i m , a n d H 7 5 0 T E M 9 1 2 e m e r g e n c y h o u s i n g - o r d e r e d s e p a r a t e l y ( r e f e r t o H 7 5 0 T E M 9 1 2 E m e r g e n c y H o u s i n g s p e c i fi c a t i o n s f o r f u r t h e r i n f o r m a t i o n o n E m e r g e n c y B a t t e r y B a c k u p ) .

Note: Specifications and Dimensions subject to change without notice.Visit our web site at www.cooperlighting.com

Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049www.cooperlighting.com

Solite® is a registered trademark of AGC Flat Glass North America