201 Construction Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port. GXR: with open impeller. GXV: with free-flow (vortex) impeller. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Applications GXR: - For clean water containing solids up to 10 mm grain size. - For draining rooms or or emptying tanks. - Extraction of water from ponds, streams or pits and for rainwater collection. - For irrigation purposes. GXV: - For clean or slightly dirty water, containing solids up to 25 mm grain size. - Particularly suitable for liquids with a high solid content. For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41. Operating conditions Liquid temperature up to 50° C. Maximum immersion depth: 5 m. Minimum water level with float: GXR = 70 mm, GXV = 130 mm. Minimum water level manual operation: GXR = 15 mm, GXV = 30 mm. Continuous duty. Motor 2-pole induction motor, 50 Hz (n ≈ 2900 rpm). GXR, GXV: three-phase 230 V ± 10%; three-phase 400 V ± 10%; GXRM, GXVM: single-phase 230 V, with float switch and thermal protector. Incorporated capacitor. Insulation class F. Protection IP X8 (for continuous immersion) Double impregnation humidity-proof dry winding. Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41. Materials Component Material Pump casing Strainer Impeller Chrome-nickel steel 1.4301 EN 10088 (AISI 304) Motor jacket Pump jacket Handle Polypropylene Shaft Chrome-nickel steel 1.4305 EN 10088 (AISI 303) Mechanical seal Ceramic alumina/Carbon/NBR Seal lubrication oil Oil for food/pharmaceutical machinery Other features on request - Other voltages. - Frequency 60 Hz. - Other mechanical seal. - Cable length 10 m. - Vertical magnetic float switch. - Motor suitable for operation with frequency converter. Characteristic curves n ≈ 2900 rpm m 10 12 14 2 4 6 l/min m /h 3 0 200 250 15 5 10 150 100 50 0 0 H m 10 12 14 2 4 6 0 H Q l/min m /h 3 0 200 250 15 5 10 150 100 50 0 Q GXR GXV GXV 25-10 GXV 25-8 GXV 25-6 GXR 13 GXR 11 GXR 9 29 Submersible Pumps in stainless steel GXR, GXV GXR, GXV
Transcript
201
ConstructionSingle-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.GXR: with open impeller.GXV: with free-flow (vortex) impeller.Motor cooled by the pumped water passing between the motorjacket and the external jacket.Double shaft seal with oil chamber.
ApplicationsGXR: - For clean water containing solids up to 10 mm grain size.
- For draining rooms or or emptying tanks.- Extraction of water from ponds, streams or pits and
for rainwater collection. - For irrigation purposes.
GXV: - For clean or slightly dirty water, containing solids up to25 mm grain size.
- Particularly suitable for liquids with a high solid content.For outdoor use a power supply cable of not less than 10 mshould be used in accordance with: EN 60 335-2-41.
Operating conditionsLiquid temperature up to 50° C.Maximum immersion depth: 5 m.Minimum water level with float: GXR = 70 mm, GXV = 130 mm.Minimum water level manual operation: GXR = 15 mm, GXV = 30 mm.Continuous duty.
Insulation class F.Protection IP X8 (for continuous immersion)Double impregnation humidity-proof dry winding.Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
MaterialsComponent MaterialPump casingStrainerImpeller Chrome-nickel steel 1.4301 EN 10088 (AISI 304)Motor jacketPump jacketHandle PolypropyleneShaft Chrome-nickel steel 1.4305 EN 10088 (AISI 303)Mechanical seal Ceramic alumina/Carbon/NBRSeal lubrication oil Oil for food/pharmaceutical machinery
Other features on request- Other voltages. - Frequency 60 Hz. - Other mechanical seal. - Cable length 10 m. - Vertical magnetic float switch. - Motor suitable for operation with frequency converter.
G 1 1/4 vertical, upward delivery port for installation insmall pits, without the need for an elbow on the pump.
Easy adjustment of thefloat switch: to allow theadjustement of start/stoppump levels.
Handle in polypropylene.
Shaft in chrome-nickelstainless steel.
Easy inspection of thecapacitor area.
Motor cooled by the pumpedwater passing between themotor jacket and the externaljacket.
Ceramic stainless steel shaftsleeve.
Impeller in chrome-nickel stainless steel.
The double shaft seal with oil chamber separates themotor from the water and provides further protectionagainst accidental operation when dry.
Oil chamber.
GXV
GXRSuction strainer with a double row ofholes, for extra safety against clogging.GXR: it allows the passage of solidsup to 10 mm.
Suction strainer with a double row of holes, for extrasafety against clogging.GXV: it allows the passage of solids up to 25 mm.
PATENTED
Minimum dimension and high levels ofperformance, for use in many differentapplications, head up to 12,7 m andflow rates up to 220 liters/min.
205
ConstructionSingle-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.GXR: with open impeller.Motor cooled by the pumped water passing between the motorjacket and the external jacket.Double shaft seal with oil chamber.
Applications- For clean water containing solids up to 12 mm grain size.- For draining rooms or or emptying tanks.- Extraction of water from ponds, streams or pits and for
rainwater collection. - For irrigation purposes.For outdoor use a power supply cable of not less than 10 mshould be used in accordance with: EN 60 335-2-41.
Operating conditionsLiquid temperature up to 50° C.Maximum immersion depth: 5 m.Minimum water level with float: 70 mm,.Minimum water level manual operation: 15 mm.Continuous duty.
three-phase 400 V ± 10%;Cable: H07RN-F, 4G1 mm2, length 10 m, without plug.
GXRM: single-phase 230 V,with float switch and thermal protector.Incorporated capacitor.Cable: H07RN-F, 3G1 mm2 (3G1,5 mm2 for 1,5 kW),length 10 m, with plug CEI-UNEL 47166.
Insulation class F.Protection IP X8 (for continuous immersion)Double impregnation humidity-proof dry winding.Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
Other features on request- Other voltages. - Frequency 60 Hz. - Other mechanical seal. - Cable length 20 m. - Vertical magnetic float switch. - Motor suitable for operation with frequency converter.- Three-phase pumps with incorporated float switch.
Installation examples with vertical magnetic float switch
Submersible Pumpsin stainless steelGXR 12GXR 12
208
Features
PATENTED
Submersible Pumpsin stainless steelGXR 12GXR 12
G 1 1/2 vertical, upward delivery port for installation insmall pits, without the need for an elbow on the pump.
Easy adjustment of the floatswitch: to allow the adjustementof start/stop pump levels.
Handle in polypropylene, with frame instainless steel.
Shaft in chrome-nickelstainless steel.
Easy inspection of thecapacitor area.
Suction strainer with a double row of holes, for extrasafety against clogging with the passage of solids up to12 mm grain size.
Motor cooled by the pumpedwater passing between themotor jacket and the externaljacket.
Impeller in chrome-nickel stainlesssteel.
The double shaft seal with oil chamber separates the motorfrom the water and provides further protection againstaccidental operation when dry.
Chamber with food/pharma-ceutical machinery oil
209
ConstructionSingle-impeller submersible pumps in chrome-nickel stainless steel, with horizontal suction port and vertical delivery portfor rainwater applications.GXR-R: with open impeller.Motor cooled by the pumped water passing between the motorjacket and the external jacket.Double shaft seal with oil chamber.
ApplicationsFor clean water containing solids up to 10 mm grain size.Extraction of water from ponds, emptying tanks or pits andfor rainwater applications. For irrigation purposes.For outdoor use a power supply cable of not less than 10 mshould be used in accordance with: EN 60 335-2-41.
Operating conditionsFloating suction filter has to be provided, see ex. pag. 217.Liquid temperature up to 50° C.Maximum immersion depth: 5 m.Minimum water level with float 70 mm.Minimum water level manual operation 15 mm.Continuous duty.
three-phase 400 V ± 10%;GXR-RM: single-phase 230 V,
with float switch and thermal protector.Incorporated capacitor.
Insulation class F.Protection IP X8 (for continuous immersion)Double impregnation humidity-proof dry winding.Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
Other features on request- Other voltages. - Frequency 60 Hz. - Other mechanical seal. - Cable length 10 m. - Vertical magnetic float switch. - Floating suction filter with pipe. - Motor suitable for operation with frequency converter.
