52
Valves & Controls
BA-455 1/2''-2''Brass Ball ValveTwo-Piece, Full Port600 WOG/150 SWPSoldered Ends
BA-350/350S 1/2''-2''Bronze Ball ValveThree-Piece, Full Port600 WOG/150 SWPSoldered Ends
BA-425 1/4''-3''Forged Brass Ball ValveTwo-Piece, Full Port600 PSIG WOG/150 PSIG SWP400 PSIG WOG/125 PSIG SWP(2-1/2'' & 3'') Threaded Ends
BA-300/300S 1/4''-2''Bronze Ball ValveThree-Piece, Full Port600 WOG / 150 SWPThreaded Ends
BA-250 3/8''-3''Forged Brass, Ball ValveTwo-Piece, Standard Port400 PSIG WOG/150 PSIG SWPSolder Ends
BA-200 1/4''-4''Forged Brass Ball ValveTwo-Piece, Standard Port400 PSIG WOG/150 PSIG SWPThreaded Ends
VALVES
690
1380
2070
2760
4140
3450
4830
WO
RK
ING
PRES
SUR
E-p
si
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE CHART
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
WO
R K
ING
PRES
SUR
E-K
Pa
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
3/8" - 1"
1-1/4" - 2"
2-1/2" - 3"
Body/ Seat Mat e rial RatingJoint ASME B16.18 for95/5 Solder
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.
232
Limits from
690
1380
2070
2760
4140
3450
WO
RK
ING
PRES
SUR
E- p
si
WORKING TEMPERATURE - F
PRESSURE - TEMPERATURE DATA
100
200
300
400
600
500
700
0 50 150 200 250 300 350 400 450100
WO
RK
ING
PRES
SUR
E-K
P a
10WORKING TEMPERATURE - C
66 121 149 177 20438 93
Seat MaterialRating
VALVES RATED FOR VACUUM SERVICE TO 29 INCHES Hg.
232
2-1/2" & 3"
052 11/27/02 1:30 PM Page 52
53
Valves & Controls
BA-150/150S 3/8''-3''Bronze Ball ValveTwo-Piece, Standard-Port600 PSIG WOG/150 PSIGSWPSolder Ends
BA-100/100S 1/4''-3''Bronze Ball ValveTwo-Piece, Standard-Port600 PSIG WOG/150 PSIG SWPThreaded Ends
BA-100H/150H 1/2''-3/4''Bronze Ball ValveTwo-Piece, Standard PortThreaded x 3/4'' Hose Endor Solder x 3/4'' Hose Endwith Dust Cap and Chain
F20 Series – 150 and 300 lbs. – 1/2"-12"• Flanged Ball Valve • Multiple-Piece Graphite • Vented Ball (Stem slot drain)• Full Port • Packing • Wall Thickness to ASME Specifications• Fire Safe to API 607 4th Ed. • ISO -5211 Mounting Pad • Spiral Wound Graphite and 304 SS• Grounded Stem & Ball Standard • Investment Cast Bodies • Body Seal• Locking Handle • and End Pieces (to 8")
TORQUE RATINGS and FLOW CO-EFFICIENTS PRESSURE / TEMPERATURE CHART
VALVES
053 12/11/02 8:55 AM Page 53
54
Valves & Controls
VALVES
054 12/11/02 8:55 AM Page 54
55
Valves & Controls
VALVES
3-PIECE, ENCLOSED-BOLT, FIRE-SAFESingle Reduced Bore35CSOR-02-LL2000 WOG, Carbon-Steel Body, Stainless-Steel Ball & Stem, Firesafe to API607, Live-Loaded Graphite Packing, Threaded Ends, Actuator Mounting Pads1/4" Thru 2"35SSOR-02-LL2000 WOG, Stainless-Steel Body, Stainless-Steel Ball & Stem. Live-LoadedFlexible Graphite Packing, Threaded Ends, Firesafe to API 607, ActuatorMounting Pads 1/4" Thru 2"• Available with socket-weld ends
3-PIECE, FULL-PORT30SSOF-021000 WOG, Stainless-Steel Body, Stainless-Steel Ball & Stem, PTFE V-RingPacking, Threaded Ends, Actuator Mounting Pads 1/4" Thru 2"30CSOF-021000 WOG, Carbon-Steel Body, Stainless-Steel Ball & Stem, PTFE V-RingPacking, Threaded Ends, Actuator Mounting Pads 1/4" Thru 2"30CCOF-021000 WOG, Carbon-Steel Body, Stainless-Steel Ball & Stem, PTFE V-RingPacking, Threaded Ends, Actuator Mounting Pads 1/4" Thru 2"30BSOF-02600 WOG, Bronze Body, Stainless-Steel Ball & Stem, PTFE V-Ring Packing,Threaded Ends, Actuator Mounting Pads 1/4" Thru 2"30BBOF-02600 WOG, Bronze Body, Chrome-Plated Ball & Stem, PTFE V-Ring Packing,Threaded Ends, Actuator Mounting Pads 1/4" Thru 2"• Available with socket-weld or solder ends
HIGH-PRESSURE, SEAL-WELDED, FIRE-SAFE41SSOR-02-LLReducing Port, Stainless-Steel Body, Stainless-Steel Ball & Stem, Threaded-Ends, Actuator Mounting Pads, 3/4" Thru 1-1/2" Class 900, 2" Thru 2-1/2"Class 60041CSOR-02-LLReducing Port, Carbon-Steel Body, Stainless-Steel Ball & Stem, Threaded-Ends, Actuator Mounting Pads, 3/4" Thru 1-1/2" Class 900, 2" Thru 2-1/2"Class 60041SSOF-02-LLFull Port, Stainless-Steel Body, Stainless-Steel Ball & Stem, Threaded-Ends,Actuator Mounting Pads, 3/4" Thru 1-1/2" Class 900, 2" Thru 2-1/2" Class 60041CSOF-02-LLFull Port, Carbon-Steel Body, Stainless-Steel Ball & Stem, threaded-Ends,Actuator Mounting Pads, 3/4" Thru 1-1/2" Class 900, 2" 2-1/2" Class 600• Available with socket-weld and butt-weld ends
DIVERTER VALVEBa3WDSLH1000 WOG, 3-Way Diverter, Threaded Ends, 3/8" Thru 2"
Industrial Ball Valves
35SSOR-02-LL
30SSOF-02
41SSOF-02-LL
BA3WDSLH
055 11/27/02 1:30 PM Page 55
56
Valves & Controls
20SSOR, 20CSOR and 20CCOR TWO-PIECE BALL VALVES
DIMENSIONS
1/4'' 3/8'' 1/2'' 3/4'' 1'' 1-1/4'' 1-1/2'' 2''SIZE IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM
A 0.375 9.53 0.375 9.53 0.500 12.70 0.687 17.45 0.875 22.23 1.000 25.40 1.250 31.75 1.500 38.10B 2.090 53.09 2.090 53.09 2.360 59.94 2.800 71.12 3.230 82.04 3.620 91.95 4.060 103.12 4.650 118.11C 1.650 41.91 1.650 41.91 1.770 44.96 2.050 52.07 2.240 56.90 2.480 62.99 2.680 68.07 2.910 73.91D 0.820 20.83 0.820 20.83 1.060 26.92 1.340 34.04 1.620 41.15 1.880 47.75 2.250 57.15 2.750 69.85E 4.187 106.35 4.187 106.35 4.187 106.35 5.750 146.05 5.750 146.05 7.625 193.68 7.625 193.68 7.625 193.68F 0.500 12.70 0.500 12.70 0.500 12.70 0.870 22.01 0.870 22.01 0.930 23.62 0.930 23.62 0.930 23.62G 1.120 28.45 1.120 28.45 1.120 28.45 1.370 34.80 1.370 34.80 1.500 38.10 1.500 38.10 1.500 38.10H 10-24NC 10-24NC 10-24NC 10-24NC 10-24NC 1/4-20NC 1/4-20NC 1/4-20NCJ 0.196 4.98 0.196 4.98 0.196 4.98 0.275 6.99 0.275 6.99 0.355 9.02 0.355 9.02 0.355 9.02K 0.90 9.91 0.390 9.91 0.390 9.91 0.560 14.22 0.560 14.22 0.650 16.51 0.650 16.51 0.650 16.51L 0.875 22.23 0.875 22.23 1.000 25.40 1.250 31.75 1.250 31.75 1.375 34.93 1.375 34.93 1.375 34.93M 0.410 10.41 0.410 10.41 0.570 14.48 0.750 19.05 0.910 23.11 1.050 26.67 1.250 31.75 1.520 38.61
DIMENSIONS–INCHES AND MILLIMETERS (20–SERIES BALL VALVES)
MATERIAL LIST
The 20SSOR, 20CSOR and 20CCOR Series ball valves are the mostadvanced two-piece valves available.Designed with the most current end-user and distributor input, theyinclude such standard features as:multi-piece V-Ring stem packing forlonger leak-free life; full ANSI NPT
thread depths; superior ASTM gradematerials of construction and thehighest pressure ratings in the industry. In addition, the Milwaukee Valve20SSOR/20CSOR/20CCOR Serieswas designed with special high-cycle-life seats with the lowest operating
torques, insuring the most economi-cal actuated ball valves available.Milwaukee Valve 20 Series carbonand stainless steel–the only ball valveyou need to specify and inventory.Conforms to: WW-V 35, Class C,Style 3, End Connection A, NACEMR-01-75, MSS-SP-110.
PART 20SSOR-02 20CCOR-02 20CSOR-021. Body ASTM A351/A744 Carbon Steel Carbon Steel
CF8M ASTM A216 WCB ASTM A216 WCB2. Tailpiece ASTM A351/A744 Carbon Steel Carbon Steel
CF8M ASTM A216 WCB ASTM A216 WCB3. Stem Stainless Steel Stainless Steel Stainless Steel
ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 3164. Ball Stainless Steel Carbon Steel Stainless Steel
ASTM A276 Type 316 AISI-12L14 Hard Chrome Plated ASTM A276 Type 3165. Handle Nut Stainless Steel 18-8 Stainless Steel 18-8 Stainless Steel 18-86. Handle Assembly Stainless Steel Carbon Steel Stainless Steel
Type 304 Zinc Plated Type 3047. Lock Washer Stainless Steel Stainless Steel Stainless Steel
Type 304 Type 304 Type 3048. Packing Nut Stainless Steel Carbon Steel Carbon Steel
ASTM 276 Type 316 AISI-12L14 AISI-12L149. Seat (-02) 15% Filled Glass 15% Glass Filled 15% Glass Filled
Reinforced PTFE Reinforced PTFE Reinforced PTFE10. Thrust Washer PTFE PTFE PTFE11. Packing PTFE PTFE PTFE12. Body Seal PTFE PTFE PTFE
VALVES
056 11/27/02 1:31 PM Page 56
57
Valves & Controls
F90SS150/300, F90CC150/300 and F90CS150/300UNIBODY FLANGED-END BALL VALVES
DIMENSIONS
A B C D E F G H J K L M NSIZE IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/2'' 0.50 13 4.25 108 2.50 64 3.50 89 5.06 129 0.81 21 1.75 44 0.71 18 0.20 5 0.32 8 2.88 73 1.88 48 5/16-183/4'' 0.69 18 4.62 117 3.65 93 3.88 99 5.97 152 0.94 24 1.75 44 0.57 15 0.28 7 0.48 12 3.13 80 2.06 52 5/16-181'' 0.88 22 5.00 127 3.80 97 4.25 108 5.97 152 1.25 32 1.75 44 0.82 21 0.28 7 0.48 12 4.19 106 2.46 63 5/16-18
1-1/2'' 1.25 32 6.50 165 4.77 121 5.00 127 8.85 225 1.81 46 1.75 44 0.06 2 0.45 12 0.63 16 5.63 143 2.50 64 5/16-182'' 1.50 38 7.00 178 4.72 120 6.00 152 8.85 225 2.07 52 2.25 57 0.31 8 0.45 12 0.63 16 6.19 157 3.00 76 5/16-183'' 2.31 59 8.00 203 6.80 172 7.50 191 11.00 279 3.09 79 3.50 89 0.34 9 0.45 12 1.20 31 7.13 181 3.75 95 3/8-164'' 3.12 79 9.00 229 7.96 202 9.00 229 14.12 359 3.92 100 4.00 102 0.30 8 0.66 17 1.35 34 8.00 203 5.27 134 7/16-146'' 4.50 114 10.50 267 9.44 240 11.00 279 18.00 457 4.70 119 4.00 102 0.58 15 0.91 23 1.88 48 9.44 240 6.63 168 7/16-14
ANSI 150 LB.–DIMENSIONS–INCHES AND MILLIMETERS (90–SERIES BALL VALVES)
ANSI 300 LB.–DIMENSIONS–INCHES AND MILLIMETERS (90–SERIES BALL VALVES)
A B C D E F G H J K L M NSIZE IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM 1/2'' 0.50 13 5.50 140 2.50 64 3.75 95 5.06 129 0.81 21 1.75 44 0.71 18 0.20 5 0.32 8 4.00 102 1.88 48 5/16-183/4'' 0.69 18 6.00 152 3.65 93 4.62 117 5.97 152 0.94 24 1.75 44 0.84 21 0.28 7 0.48 12 4.38 111 2.31 59 5/16-181'' 0.88 22 6.50 165 3.80 97 4.88 124 5.97 152 1.25 32 1.75 44 0.91 23 0.28 7 0.48 12 5.69 145 2.56 65 5/16-18
1-1/2'' 1.25 32 7.50 191 4.77 121 6.12 155 8.85 225 1.81 46 1.75 44 0.62 16 0.45 12 0.63 16 6.56 167 3.06 78 5/16-182'' 1.50 38 8.50 216 4.72 120 6.50 165 8.85 225 1.97 50 2.25 57 1.10 28 0.45 12 0.63 16 7.50 191 3.80 97 5/16-183'' 2.31 59 11.12 282 6.80 172 8.25 209 11.00 279 2.91 74 3.50 89 1.18 30 0.45 12 1.20 31 9.88 251 4.60 117 3/8-164'' 3.12 79 12.00 305 7.96 202 10.00 254 14.12 359 3.92 100 4.00 102 0.80 20 0.66 17 1.35 34 10.68 271 5.77 147 7/16-146'' 4.50 114 15.88 403 9.44 240 12.50 318 18.00 457 4.70 119 4.00 102 1.11 28 0.91 23 1.88 48 14.38 365 7.38 188 7/16-14
VALVES
057 11/27/02 1:31 PM Page 57
58
Valves & Controls
GATE 105Bronze125 lb. SWP-200 lb.WOG†General ServiceSolid Wedge DiscNon-Rising StemThreaded BonnetGland Packed Threaded Ends
GATE 148Bronze125 lb. SWP-200. lbWOG†General ServiceSolid Wedge DiscRising StemThreaded BonnetGland Packed Threaded Ends
SPECIFICATIONS
105 Conforms to: MSS SP-80. Type 1,Class 125, Threaded Ends.
SPECIFICATIONS
148 Conforms to: MSS SP-80. Type 2,Class 125, Threaded Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3 SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
GATE 149Bronze125 lb. SWP-200 lb.WOG†General ServiceSolid Wedge DiscRising StemThreaded BonnetGland Packed Sweat Ends
GATE 1140Bronze150 lb. SWP-300. lbWOG†General ServiceSolid Wedge DiscNon-Rising StemThreaded BonnetGland Packed
SPECIFICATIONS
149 Conforms to: MSS SP-80. Type 2,Class 125, Soldered Ends.
SPECIFICATIONS
1140 Conforms to: MSS SP-80. Type 1,Class 150, Threaded Ends.
SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, 3, & 44'' size has split wedge and bolted bonnet. It is notcovered in MSS SP-80.
GATE 1152Bronze125 lb. SWP-200 lb.WOG†Industrial ServiceSolid Wedge DiscRising StemUnion BonnetGland Packed
GATE 115Bronze125 lb. SWP-200. lbWOG†General ServiceSolid Wedge DiscNon-Rising StemThreaded BonnetGland Packed
SPECIFICATIONS
1152 Conforms to: MSS SP-80. Type 2,Class 125, Threaded Ends.
SPECIFICATIONS
115 Conforms to: MSS SP-80. Type 1,Class 125, Soldered Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3 SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
†Non-Shock
VALVES
058 11/27/02 1:31 PM Page 58
59
Valves & Controls
GATE 1141Bronze150 lb. SWP-300 lb. WOG†Industrial ServiceSolid Wedge DiscNon-Rising StemUnion BonnetGland Packed Threaded Ends†Non-Shock
GATE 1150Bronze150 lb. SWP-300. lb WOG†General ServiceSolid Wedge DiscRising StemThreaded BonnetGland Packed Threaded Ends†Non-Shock
SPECIFICATIONS
1141 Conforms to: MSS SP-80. Type 1,Class 150, Threaded Ends.
SPECIFICATIONS
1150 Conforms to: MSS SP-80. Type 2,Class 150, Threaded Ends.
GATE 901UBronze—Quick Opening150 lb. SWP-300 lb. WOG†Lever OperatedDouble DiscGland Packed Sweat Ends†Non-Shock
GATE 1174Bronze200 lb. SWP-400. lb WOG†Heavy Duty Service • Solid WedgeDisc • Rising Stem • Stainless Seat• Union Bonnet • Gland Packed •Threaded Ends †Non-Shock
SIZES: 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, 3 & 4
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2,21/2 & 3
GATE 1151Bronze150 lb. SWP-300 lb. WOG†Industrial ServiceSolid Wedge DiscRising StemUnion BonnetGland Packed Threaded Ends†Non-Shock
GATE 1169Bronze150 lb. SWP-300. lb WOG†General Service • Solid WedgeDisc • Rising Stem • Union BonnetGland Packed • Sweat Ends†Non-Shock
SPECIFICATIONS
1151 Conforms to: MSS SP-80. Type 2,Class 150, Threaded Ends.
SPECIFICATIONS
1169 Conforms to: MSS SP-80. Type 2,Class 150, Soldered Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
4'' size has O-ring stem seal and a bolted flanged cap (notshown).
PATENTEDWear-resistant stainless seat rings are securely expanded into thebody to assure trouble-free service. Normal seating wear isrestricted to the bronze wedge and can be easily replaced.
SPECIFICATIONS
1174 Conforms to: MSS SP-80. Type 2,Class 200, Threaded Ends.
SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2, & 2
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, & 2 SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, 3, & 4
VALVES
059 11/27/02 1:32 PM Page 59
60
Valves & Controls
GATE 1176Bronze 200 lb. SWP-400 lb. WOG† • HeavyDuty Service • Solid Wedge Disc •Non-Rising Stem • Stainless Seat •Gland Packed • Union Bonnet •Threaded Ends †Non-Shock
GATE 1182Bronze • 300 lb. SWP-1000. lb.WOG* • Heavy Duty Service • SolidWedge Disc • Rising Stem • Cu-NiSeat • Gland Packed • UnionBonnet • Threaded Ends*Non-Shock
SPECIFICATIONS
1176 Conforms to: MSS SP-80. Type 1,Class 200, Threaded Ends.
SPECIFICATIONS
1182 Conforms to: MSS SP-80. Type 2,Class 300, Threaded Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2 SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
GLOBE 590Bronze150 lb. SWP-300 lb. WOG† • HeavyDuty Service • Composition SteamDisc • Union Bonnet • GlandPacked • Threaded Ends †Non-Shock
GLOBE 591ABronze150 lb. SWP @ 406°F-300 lb.WOG† @ 150°F • Heavy DutyService • Special Hardened S.S.Seat Ring and Disc • Union Bonnet• Gland Packed • Threaded Ends
SPECIFICATIONS
590 Conforms to: MSS SP-80. Type 2,Class 150, Threaded Ends.
SPECIFICATIONS
591A Conforms to: MSS SP-80. Type 3,Class 150, Threaded Ends.
SIZES: 1/8, 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2, & 3
SIZES: 1/2, 3/4, 1, 11/4, 11/2, & 2
GATE 1186Bronze 300 lb. SWP-1000 lb. WOG† • HeavyDuty Service • Solid Wedge Disc •Non-Rising Stem • Stainless Seat •Gland Packed • Union Bonnet •Threaded Ends †Non-Shock
GLOBE 1502Bronze125 lb. SWP-200. lb. WOG†Plumbing and Heating • BronzeDisc • Threaded Bonnet • SweatEnds †Non-Shock
SPECIFICATIONS
1186 Conforms to: MSS SP-80. Type 1,Class 300, Threaded Ends.
SPECIFICATIONS
1502 Conforms to: MSS SP-80. Type 1,Class 125, Soldered Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2
SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2
PATENTEDWear-resistant stainless seat rings are securely expanded into thebody to assure trouble-free service. Normal seating wear isrestricted to the bronze wedge and can be easily replaced.
PATENTEDWear-resistant stainless seat rings are securely expanded into thebody to assure trouble-free service. Normal seating wear isrestricted to the bronze wedge and can be easily replaced.
3/8'' and 1/2'' sizes have disc integral with the stem and have nodisc ring.
For WOG service specify 590-S (Buna-N Disc). For Steam servicespecify 590-T (Teflon Disc).
PATENTED• This valve has flat seat shutoff with plug type disc for throttling
action and replaceable seat and disc.• †Non-Shock
VALVES
060 11/27/02 1:32 PM Page 60
61
Valves & Controls
GLOBE 592ABronze200 lb. SWP @ 550°F-400 lb.WOG† @ 150°F • Heavy DutyService • Special Hardened S.S.Seat Ring and Disc • UnionBonnet • Gland Packed • ThreadedEnds
GLOBE 600Bronze200 lb. SWP-400 lb. WOG† Flow Control Needle Point Bronze Stem Threaded Bonnet Gland PackedThreaded Ends†Non-ShockSPECIFICATIONS
592A Conforms to: MSS SP-80. Type 3,Class 200, Threaded Ends.
CHECK 1509Horizontal Swing —Bronze125 LB. SWP-200 LB. WOG†General Service Bronze DiscSweat Ends†Non-Shock
CHECK 548B/548TBronze Spring CheckValveRATING250 PSI Non-Shock Cold Water, Oilor Gas FEATURESBronze Body • Threaded Ends •Bronze Spring • Buna Disc Ring •Bronze Disc Holder • 100% FactoryTested • Silent Closing (minimizeswater hammer)SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2, & 2
GLOBE 593ABronze300 LB. SWP @ 550°F-600 LB.WOG† @ 150°F • Heavy DutyService • Special Hardened S.S.Seat Ring and Disc • UnionBonnet • Gland Packed • ThreadedEnds
CHECK 509Horizontal Swing —Bronze125 lb. SWP-200 lb. WOG†General Service Bronze DiscThreaded Ends †Non-Shock
SPECIFICATIONS
593A Conforms to: MSS SP-80. Type 3,Class 300, Threaded Ends.
SPECIFICATIONS
509 Conforms to: MSS SP-80. Type 3,Class 125, Threaded Ends.
SIZES: 1/2, 3/4, 1, 11/4, 11/2, & 2 For WOG service specify 509-S (Buna-N Disc). For Steam ServiceSpecify 509-T (Teflon Disc).
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, 2, 21/2 & 3
SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2, & 2
SIZES: 1/2, 3/4, 1, 11/4, 11/2, & 2
• This valve has flat seat shutoff with plug type disc for throttlingaction and replaceable seat and disc.
• †Non-Shock
SIZES: 1/8, 1/4, 3/8, 1/2 & 3/4
• This valve has flat seat shutoff with plug type disc for throttling actionand replaceable seat and disc. Alternate stem material is available.
• †Non-Shock
SPECIFICATIONS
1509 Conforms to: MSS SP-80. Type 3,Class 125, Soldered Ends.
For WOG service specify 1509-S (Buna-N Disc). For Steam Ser-vice Specify 1509-T (Teflon Disc).
VALVES
061 11/27/02 1:32 PM Page 61
62
Valves & Controls
CHECK 510Horizontal Swing—Bronze 150 lb. SWP-300 LB. WOG† Industrial Service Bronze SeatComposition Disc Threaded Ends †Non-Shock
CHECK 1510Horizontal Swing—Bronze 150 lb. SWP-300 lb. WOG†Industrial ServiceComposition Disc Sweat Ends †Non-Shock
SPECIFICATIONS
510 Conforms to: MSS SP-80. Type 4,Class 150, Threaded Ends.
SPECIFICATIONS
1510 Conforms to: MSS SP-80. Type 4,Class 150, Soldered Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2
SIZES: 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2
GATE F-2882-MIron125 lb. SWP-200 lb. WOG† Non-Rising StemSolid Wedge DiscBolted Bonnet Gland PackedFlanged Ends †Non-Shock
GATE F-2885-MIron125 lb. SWP-200 lb. WOG† OS and Y Solid Wedge Disc Bolted Bonnet Gland Packed Flanged Ends
SPECIFICATIONSF-2882-M Conforms to: MSS SP-70.
SIZES: 2, 21/2, 3 ,4, 5, 6, 8, 10 &12
CHECK 508Horizontal Swing—Bronze 200 lb. SWP-425°F-400 lb. WOG†-150°F Bronze Regrinding DiscY-Pattern Threaded Ends †Non-Shock
CHECK 507Horizontal Swing—Bronze300 lb. SWP-550°F-600 lb. WOG†-150°FBronze Regrinding Disc Y-Pattern Threaded Ends†Non-Shock
SPECIFICATIONS
508 Conforms to: MSS SP-80. Type 3,Class 200, Threaded Ends.
SPECIFICATIONS
507 Conforms to: MSS SP-80. Type 3,Class 300, Threaded Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2 & 2
For WOG service specify 510-S (Buna-N Disc). For Steam servicespecify 510-T (Teflon Disc).
Flange shape and drilling to specification USAS B16.1 (125 lb.)
SPECIFICATIONSF-2885-M Conforms to: MSS SP-70.
SIZES: 2, 21/2, 3 ,4, 5, 6, 8, 10 &12
Flange shape and drilling to specification USAS B16.1 (125 lb.)
For WOG service specify 1510-S (Buna-N Disc). For Steam ser-vice specify 1510-T (Teflon Disc).
VALVES
062 11/27/02 1:32 PM Page 62
63
Valves & Controls
GATE F-2894-MIron250 lb. SWP-450°F-500 lb. WOG†Solid Wedge Disc OS and Y Bolted BonnetGland PackedFlanged Ends †Non-Shock
GLOBE F-2981-MIron125 lb. SWP-200 lb. WOG† Flow Control Solid Disc Bolted Bonnet Gland PackedFlanged Ends†Non-Shock
SILENT CHECKVALVES 1400 Wafer StyleSemi-Steel Body125 lb. Class Bronze Trim
ANGLE 595Bronze 150 lb. SWP-300 lb. WOG†Heavy Duty ServiceComposition Steam DiscUnion BonnetGland PackedThreaded Ends†Non-Shock
SIZES: 2, 21/2, 3, 4, 5, 6, 8 & 10
GLOBE F-2983Iron250 lb. SWP-500 lb. WOG†Solid DiscBolted BonnetGland PackedFlanged Ends†Non-Shock
CHECK F-2974-M, F-2971-MHorizontal Swing—Iron125 lb. SWP-200 lb. WOG†Bolted CapFlanged Ends †Non-Shock
These iron body check valves may be installed in both horizontaland vertical lines with upward flow or in any intermediate position.Flange shape and drilling to specification USAS B16.1 (125 lb.)
SIZES: 2, 21/2, 3, 4, 5, 6, 8, 10 & 12
SIZES: 2, 21/2, 3, 4, 5, 6, 8, 10 & 12
SIZES: 2, 21/2, 3, 4, 5, 6, & 8
Flange shape and drilling to specifica-tion USAS B16.2 (250 lb.)
Flange shape and drilling to specifi-cation USAS B16.2 (250 lb.)
ANSI CLASS 250Model Weight
Size No. Lbs. A B
SPECIFICATIONSF-2894-M Conforms to: MSS SP-70. SPECIFICATIONS
F-2891-M Conforms to: MSS SP-85.
Flange shape and drilling to specifica-tion USAS B16.1 (125 lb.)
SPECIFICATIONSF-2983 Conforms to: MSS SP-85.
SPECIFICATIONSF-2974-M Conforms to: MSS SP-71, Type 1.
F-2971-MSame as F-2974-M except all in iron
SIZES 2" THRU 6" ARE COMBINATIONANSI CLASS 125 AND 250 VALVESUSE ANSI CLASS 125 DIMENSIONS
8 1458 86 133/8 61/210 1460 137 16 81/4
SPECIFICATIONS
595 Conforms to: MSS SP-80. Type 2,Class 150, Threaded Ends.
SIZES: 1/4, 3/8, 1/2, 3/4, 1, 11/4, 11/2, & 2
For WOG service specify 595-S (Buna-N Disc). For Steam servicespecify 595-T (Teflon Disc).
VALVES
SIZES: 2, 21/2, 3, 4, 5, 6, 8, 10 & 12
063 11/27/02 1:33 PM Page 63
64
Valves & Controls
BUTTERFLY VALVES
ALL THE BEST IN EVERY VALVEWhen it comes to butterfly valves,one manufacturer offers this fea-ture. Another offers that. Stillanother offers these, but notthose. Only Milwaukee Valve hasall the best features, all standardin one valve.
Butterfly valves from MilwaukeeValve combine 200 psi perfor-mance with a relatively low oper-ating torque. The secret is adesign that matches a specially-shaped disc edge with a uniqueelastomer contour. The result is alow friction seat that operateseasier and lasts longer. And theprice for this performance is rela-tively low.
“C” AND “M” SERIES BUTTERFLY VALVES AVAILABLE IN BOTH LUG AND WAFER STYLE
C SERIES 2''-12''
Disc• Disc edge machined
for low friction, tightseal and reducedsleeve wear.
• Streamlined profilefor maximum flow.
• “Floating Disc”design for concentricsealing and reducedsleeve wear.
Bearing & Seals• Permanently-lubricated nylatron stem bearing for
low friction and side-load support.• Triple seal reduces possibility of external leakage.• Upper and lower dirt seals.
Stem• Two-piece stem design allows disc to “float”.• Positive stem retention for safety.• Low tolerance stem-disc connection for control of disc position.
Sleeve• Cartridge sleeve design for extended service and
ease of replacement. Can be used for vacuumservice.
• Seating area designed for low friction, tight seal.
• Molded-flange ribs for tight gasket sealing.• Elastomer molded for primary stem sealing.
Body• Extended neck for insulation clearance.• Locating holes on wafer body for easy
installation.• Standardized mounting flange for manual or actuated
operators.• Meets API-609 and MSS-SP-67 specifications for design
and testing.
ITEM PARTS NAME MATERIALS ASTM SPEC.1 Body-Wafer Cast Iron ASTM A126, Class B1A Body-Lug Cast Iron ASTM A126, Class B2 Disc Aluminum Bronze ASTM B148, ALY.9543 Bottom Stem Stainless Steel ASTM A582, Type 4164 Top Stem Stainless Steel ASTM A582. Type 4165 Main Bearing Nylatron GS6 Dirt Seal BUNA-N ASTM D20007 Stem Seal BUNA-N ASTM D20008 Sleeve EPDM ASTM D20009 Pin Stainless Steel/Carbon-Steel-Plated
10 Lower Dirt Seal BUNA-N ASTM D200011 Sec. Bearing Nylatron GS (8'', 10'' & 12'' Only)
MATERIALS LIST
064 11/27/02 1:33 PM Page 64
65
Valves & Controls
M SERIES 2''-12''
M SERIES 14''-20''
ITEM PARTS NAME MATERIALS ASTM SPEC.1 Body-Wafer Cast Iron ASTM A126, Class B1A Body-Lug Cast Iron ASTM A126, Class B1B Lug Ductile Iron ASTM A536, GR. 65-45-122 Disc Aluminum Bronze ASTM A148, ALY.9542A Disc NP Ductile Iron ASTM A536. GR. 65-45-122B Disc Stainless Steel ASTM A743, GR. CF-8M3 Bottom Stem Stainless Steel ASTM A582, Type 4163A Bottom Stem Stainless Steel ASTM A276, Type 3164 Top Stem Stainless Steel ASTM A582, Type 4164A Top Stem Stainless Steel ASTM A276, Type 3165 Main Bearing Nylatron GS6 Dirl Seal BUNA-N ASTM D20007 Stem Seal BUNA-N ASTM D20008 Sleeve EPDM ASTM D20008A Sleeve BUNA-N ASTM D20008B Sleeve Viton ASTM D20009 Pin Stainless Steel/Carbon-Steel-Plated
10 Lower Dirt Seal BUNA-N ASTM D200011 Sec. Bearing Nylatron GS (8'', 10'' & 12'' Only)
MATERIALS LIST
ITEM PARTS NAME MATERIALS ASTM SPEC.1 Body-Wafer Cast Iron ASTM A126, Class B1A Body-Lug Cast Iron ASTM A126, Class B2 Disc NP Ductile Iron ASTM A3952A Disc Aluminum Bronze ASTM B148, ALLOY.9522B Disc Stainless Steel ASTM A351, GR. CF8M3 Stem Stainless Steel ASTM A582, Type 4163A Stem Stainless Steel ASTM A276, Type 3164 Seat BUNA-N4A Seat EPDM5 O-Ring Seat BUNA-N5A O-Ring Seat EPDM6 O-Ring Stem BUNA-N6A O-Ring Stem EPDM7 O-Ring Disc BUNA-N7A O-Ring Disc EPDM8 Pin Stainless Steel ASTM A276, Type 3169 Plug Stainless Steel ASTM A276, Type 302
10 Bearing Steel-Teflon11 Bottom Cover Steel ASTM A3612 Gasket Composition Non-Asbestos13 Bolt Steel ASTM A307, Grade B14 Key Stainless Steel ASTM A582, Type 41615 Nameplate Stainless Steel16 Screw Steel17 Lockwasher Steel ASTM A108T, Grade 102018 Bolt Steel ASTM A307, Grade B20 Handwheel Ductile Iron ASTM A536, Grade B 65-45-1221 Handwheel Pin Stainless Steel22 Gear Unit Assemby
MATERIALS LIST
BUTTERFLY VALVES
065 11/27/02 1:33 PM Page 65
66
Valves & Controls
DIMENSIONS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2A 2-1/4 2-2/3 1-7/8 2 2-1/8 2-5/8 2-7/8 3-1/4B 1-1/2 1-1/2 1-1/2 1-5/8 1-3/4 2-3/16 2-5/16 2-5/8C 3-1/2 3-1/2 3-1/2 3-1/2 3-1/2 5 5 5CV 10 10 13 25 43 85 112 180
WEIGHT (lbs.) 0.5 0.5 0.5 0.6 0.75 0.75 1.5 3.0
DIMENSIONS AND WEIGHTS
BUTTERBALL 1/4''-2''
OPTIONS AND ACCESSORIES
BB2-100 (Threaded)
BB2-350 (Solder Ends)
DIMENSIONS 3/8 1/2 3/4 1 1-1/4 1-1/2 2A 2-3/8 2-1/2 3-1/8 3-5/8 4-3/8 4-7/8 5-5/8B 1-1/2 1-1/2 1-9/16 1-3/4 2-3/16 2-5/16 2-5/8C 3-1/2 3-1/2 3-1/2 3-1/2 5 5 5D 1-5/8 1-1/2 1-5/8 1-13/16 2-7/16 2-11/16 2-15/16CV 10 13 25 43 85 112 180
WEIGHT (lbs.) 0.5 0.5 0.6 1.0 1.6 2.0 3.7
DIMENSIONS AND WEIGHTS
LEVER OPERATORGEAR OPERATOR MEMORY STOP STOP PLATE
MACHINE BOLTS
STUD BOLTS
CAP SCREWS
Machine Bolts Stud Bolts Cap Screws All BoltingTapped
BoltBolt Holes Needed Needed Needed Threads
Valve Valve Circle Per Per Per Per Per InchType Size Dia. Body Valve Length Valve Length Valve Length Diameter and Class
2 – – 4 3-1/4 4 4-1/2 – – 5/8 –2-1/2 – – 4 4 4 4-3/4 – – 5/8 –
3 – – 4 4-1/4 4 4-3/4 – – 5/8 –4 – – 8 4-3/4 8 5-1/2 – – 5/8 –5 – – 8 5 8 5-3/4 – – 3/4 –6 – – 8 5-1/4 8 6 – – 3/4
Wafer 8 – – 8 5-1/2 8 6-1/2 – – 3/410 – – 12 6 12 7 – – 7/812 – – 12` 6-1/2 12 7-1/2 – – 7/814 18-3/4 4 12 7 12 8 8 2-1/2 1 8 UNC-2A16 21-1/4 4 16 8 16 9 8 2-3/4 1 8 UNC-2A18 22-3/4 4 16 9-1/2 16 10-1/2 8 2-3/4 1-1/8 7 UNC-2A20 25 4 20 10 20 11 8 2-3/4 1-1/8 7 UNC-2A24 29-1/2 4 20 11-1/2 20 12-3/4 8 3 1-1/4 7 UNC-2A2 4-3/4 4 4 3-3/4 4 4-1/2 8 1-1/4 5/8 11 UNC-2A
2-1/2 5-1/2 4 4 4 4 4-3/4 8 1-1/2 5/8 11 UNC-2A3 6 4 4 4-1/4 4 4-3/4 8 1-1/2 5/8 11 UNC-2A4 7-1/2 8 8 4-3/4 8 5-1/2 16 1-3/4 5/8 11 UNC-2A5 8-1/2 8 8 5 8 5-3/4 16 2 3/4 10 UNC-2A6 9-1/2 8 8 5-1/4 8 6 16 2 3/4 10 UNC-2A
Lug 8 11-3/4 8 8 5-1/2 8 6-1/2 16 2-1/4 3/4 10 UNC-2A10 14-1/4 12 12 6 12 7 24 2-1/4 7/8 9 UNC-2A12 17 12 12 6-1/2 12 7-1/2 24 2-3/4 7/8 9 UNC-2A14 18-3/4 12 12 7 12 8 24 2-3/4 1 8 UNC-2A16 21-1/4 16 16 8 16 9 32 2-3/4 1 8 UNC-2A18 22-3/4 16 16 9-1/2 16 10-1/2 32 3-1/2 1-1/8 7 UNC-2A20 25 20 20 10 20 11 See Note See Note 1-1/8 7 UNC-2A24 29-1/2 20 20 11-1/2 20 12-3/4 40 3-1/2 1-1/4 7 UNC-2A
NOTES: Bolts should be square or heavy hexagon (ANSI B18.2.1). Nuts should be heavy semi-finished hexagon (ANSI B18.2.2). Threads on bolts andstud bolts for insertion through untapped holes (and all nuts) should be in the Unified Coarse Thread Series (UNC), Class A and Class B (ANSI B1.1).*14 thru 24 have blind holes tapped each side of stem-4 each face. Note: 20'' size only requires eight 3'' cap screws and thirty-two 3-1/2'' capscrews.
BUTTERFLY VALVES
FLANGE BOLTING
066 11/27/02 1:33 PM Page 66
67
Valves & Controls
GATE CLASS 150 2''-12''1550CB2 FLANGED ENDS/1552CB2 BUTT-WELD ENDS
GATE CLASS 300 2''-10''3050CB2 FLANGED ENDS/3052CB2 BUTT-WELD ENDS
Port Line Flange HeightSize Dia. Dia. Dia. Thickness Bolt Circle Hole Dia. Raised Face to BW Open Closed Stem
(min.) Dia. Face Dia. FaceNPS N S D b k d g L L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 2.11 6.00 0.62 4.75 0.75 3.62 7.00 8.50 16.29 13.58 0.7550.8 53.6 152.4 15.7 120.7 19.1 91.9 177.8 215.9 413.8 344.9 19.12.50 2.58 7.00 0.69 5.50 0.75 4.12 7.50 9.50 17.32 14.17 0.75
63.5 65.5 177.8 17.5 139.7 19.1 104.6 190.5 241.3 439.9 359.9 19.13.00 3.07 7.50 0.75 6.00 0.75 5.00 8.00 11.13 19.68 16.14 0.88
76.2 78.0 190.5 19.1 152.4 19.1 127.0 203.2 282.7 499.9 410.0 22.24.00 4.09 9.00 0.94 7.50 0.75 6.19 9.00 12.00 24.76 19.84 1.00
101.6 103.9 228.6 23.9 190.5 19.1 157.2 228.6 304.8 628.9 503.9 25.45.00 5.10 10.00 0.94 8.46 0.87 7.31 10.00 15.00 28.38 22.64 1.13
127.0 129.5 254.0 23.9 215.0 22.0 185.7 254.0 381.0 720.8 575.0 28.66.00 6.15 11.00 1.0 9.50 0.88 8.50 10.50 15.88 32.80 25.90 1.25
152.4 156.2 279.4 25.4 241.3 22.4 215.9 266.7 403.4 833.1 657.9 31.88.00 8.15 13.50 1.12 11.75 0.88 10.62 11.50 16.50 40.74 32.44 1.38
203.2 207.0 342.9 28.4 298.5 22.4 269.7 292.1 419.1 1034.8 824.0 34.910.00 10.20 16.00 1.19 14.25 1.00 12.75 13.00 18.00 50.11 38.78 1.50
254.0 259.1 406.4 30.2 362.0 25.4 323.9 330.2 457.2 1272.8 985.0 38.112.00 12.24 19.00 1.25 17.00 1.00 15.00 14.00 19.75 56.66 45.31 1.63
304.8 310.9 482.6 31.8 431.8 25.4 381.0 355.6 501.7 1490.0 1150.9 41.3
DIMENSIONS
DIMENSIONS
2
2-1/2
3
4
5
6
8
10
12
Port Line Flange HeightSize Dia. Dia. Dia. Thickness Bolt Circle Hole Dia. Raised Face to Open Closed Stem
(min.) Dia. Face Dia. Face BWNPS N S D b k d g L=L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 2.11 6.50 0.88 5.00 0.75 3.62 8.50 16.25 13.79 0.7550.8 53.6 165.1 22.4 127.0 19.1 91.9 215.9 412.8 350.3 19.12.50 2.58 7.50 1.00 5.88 0.88 4.12 9.50 17.46 14.40 0.75
63.5 65.5 190.5 25.4 149.4 22.4 104.6 241.3 443.5 365.8 19.13.00 3.07 8.25 1.12 6.62 0.88 5.00 11.13 19.88 16.25 0.88
76.2 78.0 209.6 28.4 168.1 22.4 127.0 282.7 505.0 412.8 22.24.00 4.09 10.00 1.25 7.88 0.88 6.19 12.00 24.64 19.76 1.00
101.6 103.9 254.0 31.8 200.2 22.4 157.2 304.8 625.9 501.9 25.46.00 6.15 12.50 1.44 10.62 0.88 8.50 15.88 32.67 25.98 1.25
152.4 156.2 317.5 26.6 269.7 22.4 215.9 403.4 829.8 659.9 31.88.00 8.15 15.00 1.62 13.00 1.00 10.62 16.50 41.94 32.89 1.38
203.2 207.0 381.0 41.1 330.2 25.4 269.7 419.1 1065.3 835.4 34.910.00 10.20 17.50 1.88 15.25 1.12 12.75 18.00 49.88 38.89 1.50
254.0 259.1 444.5 47.8 387.4 28.4 323.9 457.2 1267.0 987.8 38.1
2
2-1/2
3
4
6
8
10
CAST STEEL VALVES
067 11/27/02 1:34 PM Page 67
68
Valves & Controls
GATE CLASS 600 2''-12''6050CB2 FLANGED ENDS/6053CB2 BUTT-WELD ENDS
GLOBE CLASS 150 2''-8''1560CB2 FLANGED ENDS/1562CB2 BUTT-WELD ENDS
Port Line Flange HeightSize Dia. Dia. Dia. Thickness Bolt Circle Hole Dia Raised Face to Open Closed Stem
(min.) Dia. Face Dia. Face BWNPS N S D b k d g L=L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 2.11 6.50 1.00 5.00 0.75 3.62 11.50 18.72 15.77 0.8850.8 53.6 165.1 25.4 127.0 19.1 91.9 292.1 475.5 400.6 22.22.50 2.58 7.50 1.12 5.88 0.89 4.12 13.00 19.90 15.77 0.88
63.5 65.5 190.5 28.4 149.4 22.6 104.6 330.2 480.1 400.6 22.23.00 3.07 8.25 1.25 6.62 0.88 5.00 14.00 23.30 19.29 1.00
76.2 78.0 209.6 31.8 168.1 22.4 127.0 355.6 490.0 25.44.00 4.09 10.75 1.50 8.50 1.00 6.19 174.00 28.97 24.22 1.25
101.6 103.9 273.1 38.1 215.9 25.4 157.2 431.8 735.8 615.2 31.86.00 6.24 14.00 1.88 11.50 1.12 8.50 22.00 39.03 31.33 1.50
152.4 158.5 355.6 47.8 292.1 28.4 215.9 558.8 966.0 795.8 38.17.88 8.11 16.50 2.19 13.75 1.25 10.62 26.00 46.77 38.08 1.75
200.2 206.0 419.1 55.6 349.3 31.8 269.7 660.4 1188.0 967.2 44.59.75 10.00 20.00 2.50 17.00 1.38 12.75 31.00 58.20 47.20 1.88
247.7 254.0 508.0 63.5 431.8 35.1 232.9 787.4 1478.3 1198.9 47.611.75 12.00 22.00 2.62 19.25 1.38 15.00 33.00 66.90 53.90 2.00
298.5 304.8 558.8 66.5 489.0 35.1 381.0 838.2 1699.3 1369.1 50.8
DIMENSIONS
DIMENSIONS
2
2-1/2
3
4
6
8
10
12
Line Flange HeightSize Nominal. Dia. Thickness Bolt Circle Hole Dia Raised Face to Open Closed Stem
Size Dia. (min.) Dia. Face Dia. Face BWNPS N D b k d g L=L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 6.00 0.62 4.75 0.75 3.62 8.00 14.01 12.44 0.8850.8 152.4 15.7 120.7 19.1 91.9 203.2 355.9 316.0 22.22.50 7.00 0.69 5.50 0.75 4.12 8.50 14.05 12.48 0.88
63.5 177.8 17.5 139.7 19.1 104.6 215.9 356.9 317.0 22.23.00 7.50 0.75 6.00 0.75 5.00 9.50 17.20 15.02 1.00
46.2 190.5 19.1 152.4 19.1 127.0 241.3 436.9 381.5 25.44.00 9.00 0.94 7.50 0.75 6.19 11.50 20.78 18.02 1.13
101.6 228.6 23.9 190.5 19.1 157.2 292.1 527.8 457.7 28.66.00 11.00 1.00 9.50 0.88 8.50 16.00 24.45 20.91 1.25
152.4 279.4 25.4 241.3 22.4 215.9 406.4 621.0 531.1 31.88.00 13.50 1.12 11.75 0.88 11.00 20.00 28.00 24.00 1.38
203.2 342.9 28.4 298.5 22.4 279.4 508.0 711.2 609.6 34.9
2
2-1/2
3
4
6
8
591.8
CAST STEEL VALVES
068 11/27/02 1:34 PM Page 68
69
Valves & Controls
GLOBE CLASS 300 2''-8''3060CB2 FLANGED ENDS/3062CB2 BUTT-WELD ENDS
GLOBE CLASS 600 2''-8''6060CB2 FLANGED ENDS/6063CB2 BUTT-WELD ENDS
DIMENSIONS
DIMENSIONS
Line Flange HeightSize Nominal. Dia. Thickness Bolt Circle Hole Dia Raised Face to Open Closed Stem
Size Dia. (min.) Dia. Face Dia. Face BWNPS N D b k d g L=L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 6.50 0.88 5.00 0.75 3.62 10.50 15.43 14.16 0.8850.8 165.1 22.4 127.0 19.1 91.9 266.7 391.9 359.7 22.22.50 7.50 1.00 5.88 0.88 4.12 11.50 15.63 14.30 0.88
63.5 190.5 25.4 149.4 22.4 104.6 292.1 297.2 363.2 22.23.00 8.25 1.12 6.62 0.88 5.00 12.50 18.20 16.35 1.00
76.2 209.6 28.4 168.1 22.4 127.0 317.5 462.3 415.3 25.44.00 10.00 1.25 7.88 0.55 6.19 14.00 21.46 19.63 1.25
101.6 254.00 31.8 200.2 22.4 157.2 355.2 545.1 498.6 31.86.00 12.50 1.44 10.62 0.88 8.50 17.50 28.05 23.92 1.50
152.4 317.5 36.6 269.7 22.4 215.9 444.5 712.5 607.6 38.18.00 15.00 1.63 13.00 1.00 10.62 19.50 39.60 33.62 1.75
203.2 381.0 41.4 330.2 25.4 269.7 495.3 1005.8 853.9 44.5
2
2-1/2
3
4
6
8
Line Flange HeightSize Nominal. Dia. Thickness Bolt Circle Hole Dia Raised Face to Open Closed Stem
Size Dia. (min.) Dia. Face Dia. Face BWNPS N D b k d g L=L1 H H dv
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 6.50 1.00 5.00 0.75 3.62 11.50 17.64 16.30 1.0050.8 165.1 25.4 127.0 19.1 91.9 292.1 448.1 414.0 25.42.50 7.50 1.12 5.88 0.88 4.12 13.00 17.84 16.50 1.00
63.5 190.5 28.4 149.4 22.4 104.6 330.2 453.1 419.1 25.43.00 8.25 1.25 6.62 0.88 5.00 14.00 20.67 19.10 1.25
76.2 209.6 31.8 168.1 22.4 127.0 355.6 525.0 485.1 31.84.00 10.75 1.50 8.50 1.00 6.19 17.00 24.42 22.41 1.50
101.6 273.1 38.1 215.9 25.4 157.2 431.8 620.3 569.2 38.16.00 14.00 1.88 11.50 1.12 8.50 22.00 32.91 29.80 1.88
152.4 355.6 47.8 292.1 28.4 215.9 558.8 835.9 756.9 47.68.00 16.50 2.19 13.75 1.25 10.62 26.00 41.20 37.44 2.00
203.2 419.1 55.6 349.3 31.8 269.7 660.4 1046.5 951.0 50.8
2
2-1/2
3
4
6
8
CAST STEEL VALVES
069 11/27/02 1:34 PM Page 69
70
Valves & Controls
SWING CHECK CLASS 150 2''-12''1570CB2 FLANGED ENDS/1572CB2 BUTT-WELD ENDS
SWING CHECK CLASS 300 2''-12''3070CB2 FLANGED ENDS/3072CB2 BUTT-WELD ENDS
Line Flange Size Nominal Dia. Thickness Bolt Circle Hole Dia Raised Face to Height
Size Dia. (min.) Dia. Face Dia. Face BWNPS N D b k d g L=L1 H
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 6.50 0.88 5.00 0.75 3.62 10.50 6.2050.8 165.1 22.4 127.0 19.1 91.9 266.7 157.52.50 7.00 1.00 5.88 0.89 4.12 11.50 7.00
63.5 190.5 25.4 149.4 22.6 104.6 292.1 177.83.00 8.25 1.12 6.62 0.09 .500 12.50 7.50
76.2 209.6 28.4 168.0 22.4 127.0 317.5 190.54.00 10.00 1.25 7.88 0.88 6.19 14.00 8.75
101.6 254.0 31.8 200.2 22.4 157.25 355.6 222.36.00 12.50 1.44 10.62 0.88 8.50 17.50 11.40
152.4 317.5 36.6 269.7 22.4 215.9 444.5 289.68.00 15.00 1.62 13.00 1.00 10.62 21.00 13.20
203.2 381.0 41.1 330.2 25.4 269.7 533.4 335.310.00 17.50 1.88 15.25 1.12 12.75 24.50 14.75
254.0 444.5 47.8 387.4 28.4 323.9 622.3 374.712.00 20.50 2.00 17.75 1.25 15.00 28.00 21.85
304.8 520.7 50.8 450.9 31.8 381.0 711.2 555.0
DIMENSIONS
DIMENSIONS
2
2-1/2
3
4
6
8
10
12
Line Flange Size Nominal Dia. Thickness Bolt Circle Hole Dia Raised Face to Height
Size Dia. (min.) Dia. Face Dia. Face BWNPS N D b k d g L=L1 H
INCHES INCHES INCHES INCHES INCHES INCHES INCHES INCHES (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2.00 6.50 0.88 5.00 0.75 3.62 10.50 6.2050.8 165.1 22.4 127.0 19.1 91.9 266.7 157.52.50 7.00 1.00 5.88 0.89 4.12 11.50 7.00
63.5 190.5 25.4 149.4 22.6 104.6 292.1 177.83.00 8.25 1.12 6.62 0.88 5.00 12.50 7.50
76.2 209.6 28.4 168.0 22.4 127.0 317.5 190.54.00 10.00 1.25 7.88 0.88 6.19 14.00 8.75
101.6 254.0 31.8 200.2 22.4 157.25 355.6 222.36.00 12.50 1.44 10.62 0.88 8.50 17.50 11.40
152.4 317.5 36.6 269.7 22.4 215.9 444.5 289.68.00 15.00 1.62 13.00 1.00 10.62 21.00 13.20
203.2 381.0 41.1 330.2 25.4 269.7 533.4 335.310.00 17.50 1.88 15.25 1.12 12.75 24.50 14.75
254.0 444.5 47.8 387.4 28.4 323.9 622.3 374.712.00 20.50 2.00 17.75 1.25 15.00 28.00 21.85
304.8 520.7 50.8 450.9 31.8 381.0 711.2 555.0
2
2-1/2
3
4
6
8
10
12
CAST STEEL VALVES
070 11/27/02 1:34 PM Page 70