FANUC LTD
Series 0i-MDMemory card
8.4" color LCD/MDI
10.4" color LCD
New
High reliable and high cost-performance CNC FANUC Series 0i - MD
High reliable and cost-performance CNC with NANO interpolation for machining center
Packages of the most efficient CNC features Max. controlled axes : 5 axes Simultaneously controlled axes : 4 axes Max. spindle motors : 2 motors Applicable servo : i , i Series Available LCD unit : 8.4"/10.4" color AI contour control and NANO interpolation Spindle control with servo motor Embedded Ethernet as standard Memory card / Data server Editing ・ Operation Plenty of customize functions C language executor, FANUC PICTURE Function Block (PMC function) NCGuide, NCGuidePro
FANUC LTD
FSSB
Series 0i-MDPC
Internet
AC SERVO MOTORiS series
AC SPINDLE MOTORi seriesSERVO AMPLIFIER
iseries
AC SERVO MOTORiS series
New
System configurationFANUC Series 0i - MD
Embedded Ethernet 100 BASE-TX * (standard)
8.4" LCD/MDI (color)10.4" LCD (color)
SERVO AMPLIFIER iSV series(with I/O Link)
FANUC I/O Link DI/DO 1024/1024( standard)
2048/2048( option)
Operator’s panel
Connection can also be established with i series.
Connection panelI/O module
* In case of connection with 10BASE-T, it is need to relay with HUB, which meets the following requirements. correspondence to 100BASE-TX, with Auto negotiation function, store & forward method
FANUC LTD
Series 0i-TD
High reliable and high cost-performance CNC suitable for various machines from general lathe to 2-path lathe
High reliable and high cost-performance CNC FANUC Series 0i – TD
New
Memory card
8.4" color LCD/MDI
10.4" color LCD
Packages of the most efficient CNC features Max. controlled axes : 1path sys. 4 axes 2paths sys. 8 axes (Max. 5 axes in each path) Simultaneously controlled axes : 4 axes Max. spindle motors : 1path sys. 2 motors 2paths sys. 3 motors (Max. 2 motors in each path) Applicable servo : i , i Series Available LCD unit : 8.4"/10.4" color NANO interpolation Spindle control with servo motor Embedded Ethernet as standard Memory card / Data server Editing ・ Operation C language executor, FANUC PICTURE Function Block (PMC function) NCGuide, NCGuidePro
FANUC LTD
FSSB
8.4" LCD/MDI (color)10.4" LCD (color)
Series 0i-TD PC
Internet
SERVO AMPLIFIER iSV series(with I/O Link)
AC SERVO MOTORiS series
iSVSP
1st path
2nd pathFANUC I/O Link DI/DO 1024/1024( standard)
2048/2048( option)
AC SERVO MOTORiS series
AC SPINDLE MOTORi seriesSERVO AMPLIFIER
iseries
New
System configurationFANUC Series 0i - TD (2path)
Operator’s panel
Connection can also be established with i series.
Connection panelI/O module
* In case of connection with 10BASE-T, it is need to relay with HUB, which meets the following requirements. correspondence to 100BASE-TX, with Auto negotiation function, store & forward method
Embedded Ethernet 100 BASE-TX * (standard)
FANUC LTD
Memory card
8.4" color LCD/MDI (Horizontal)
High reliable and cost-performance CNC up to 3 axes control
Series 0i Mate - MODEL D8.4" color LCD/MDI (Vertical)
New
for machining center FANUC Series 0i Mate-MDfor lathe FANUC Series 0i Mate-TD
High reliable and high cost-performance CNC FANUC Series 0i Mate - MODEL D
Packages of the most efficient CNC features Max. controlled axes : 3 axes Simultaneously controlled axes : 3 axes Max. spindle motors : 1 motor Applicable servo : i Series Available LCD unit : 8.4" color Memory card Editing ・ Operation Function Block (PMC function) NCGuide, NCGuidePro
FANUC LTD
FSSB
FANUC I/O Link DI/DO 256/256
8.4" LCD/MDI (color)
Series 0i Mate - MODEL D
AC SERVO MOTORiS series
AC SPINDLE MOTORi seriesSERVO AMPLIFIER
iseries
AC SERVO MOTORiS series
New
System configurationFANUC Series 0i Mate - MODEL D
Operator’s panelConnection panelI/O module
SERVO AMPLIFIER iSV series(with I/O Link)
FANUC LTD
ECC Technology
ECC technology is a high-reliability technology that makes it possible to correct errors if they happen during data transfer.
Easy maintenance
Detachable fan motor and battery realize further easy maintenance.
Fan motor
Battery
New
High-reliability technology and Easy maintenance
FANUC Series 0i / 0i Mate - MODEL D
High-reliability by ECC (error correcting code) technology and further easy maintenance by Detachable fan motor and battery
• Application to memory, FSSB and internal BUS• Easy to presume failed part• Ensuring high-reliability under harsh FA environments with noise, vibrations and oil mists
FANUC LTD
Position command to servo control is calculated in much finer resolution than input unit (1nm for input unit of 1m).
Machine movement becomes very smooth resulting in high accuracy of finished surface.
More smooth machined surface is obtained for combined use with i servo.
Feature
Smooth machined surface achieved in combination withhigh-speed, high-precise Servo control
New
NANO interpolationFANUC Series 0i - MODEL D
Conventional InterpolationConventional Interpolation NANO InterpolationNANO Interpolation
..
Y ( μ m)
1234
0 X ( μ m)3 6 9
1div=1nm1div=1nm
..
Y ( μ m)
12
4
0 X ( μ m)3 6 9
3
Taper CuttingTaper Cutting(X:Y=3:1)(X:Y=3:1)
FANUC LTD
Rigid tapping Spindle indexing
- Commanding the stop position by program
- Indexing command without spindle stop
Sample of rigid tapping
M29 S500 P2; G84 Z-50. R-20. F1. ;
ZS
Rotating live toolwith servo motor
- Rotation command with S-code
Achieving spindle control with servo motor
Available command
Shortening of cycle time
New
Spindle control with servo motorFANUC Series 0i - MODEL D
Speed control
Thread cutting Constant surface speed control Cs contouring control
Feature
FANUC LTD
Function0i - MD 0i Mate - MD
Package A Package B Package CControlled paths 1 1
Max. machine controlled axes 5 3
Simultaneously controlled axes 4 3
Max. spindle axes 2 1
Connectable servo motor i, i i
Display unit
8.4” color LCD
○
○
10.4” color LCD(without touch panel) -10.4” color LCD(with touch panel)
NANO interpolation ○ -
Capacity of programs
320K (800m) - ○ -512K (1280m) ○ - ○
2M (5120m) ☆ - -PMC system PMC function PMC/L function PMC/L function
PMC/L function
5,000steps - ○ ○
8,000steps - ☆ ☆
PMC function24,000steps ○ - -32,000steps ☆ - -
Specification (1/2)FANUC Series 0i / 0i Mate - MD
○ : Basic function ☆: Optional function -: Not available
FANUC LTD
Function0i - MD 0i Mate - MD
Package A Package B Package C
I/O Link1ch DI/DO
256 / 256 - - ○
1024 / 1024 ○ ○ -2ch DI/DO 2048 / 2048 ☆ - -
Function Block function ☆ ☆Embedded Ethernet ○ -Memory Card Editing / Operation ○ ○
Data Server Editing / Operation ☆ -MANUAL GUIDE 0i ☆ ☆MANUAL GUIDE i ☆ -AI contour control ☆ - -Spindle control with servo motor ☆ -Protection of Data at Eight Levels ○ ○
Dynamic display language switching ○ ○
C language executor / FANUC PICTURE ☆ -FANUC NCGuide / FANUC NCGuidePro ☆ ☆FANUC Program Transfer Tool ☆ -FANUC CNC Setting Tool ☆ ☆
Specification (2/2)FANUC Series 0i / 0i Mate - MD
○ : Basic function ☆: Optional function -: Not available
FANUC LTD
Function0i - TD 0i Mate - TD
Package A Package B Package CControlled paths 2 1 1
Max. machine controlled axes8
(Max. 5 in one path)
4 3
Simultaneously controlled axes 4 (each path) 4 3
Max. spindle axes
1 - - ○
2 ○ -3
☆(Max. 2 in one
path)- -
Connectable servo motor i, i i
Display unit
8.4” color LCD
○
○
10.4” color LCD(without touch panel) -10.4” color LCD(with touch panel)
NANO interpolation ○ -
Capacity of programs
320K (800m) - ○ -512K (1280m) - ○ - ○
1M (2560m) ○ - -MANUAL GUIDE 0i ☆ (1st path only) ☆ ☆MANUAL GUIDE i ☆ -TURN MATE i - ☆ ☆
○ : Basic function ☆: Optional function -: Not available
Specification (1/2)FANUC Series 0i / 0i Mate - TD
FANUC LTD
Function0i - TD 0i Mate - TD
Package A Package B Package CPMC system PMC function PMC/L function PMC/L function
PMC/L function
5,000steps - ○ ○
8,000steps - ☆ ☆
PMC function
24,000steps ○ - -32,000steps ☆ - -
I/O Link1ch DI/DO
256 / 256 - - ○
1024 / 1024 ○ ○ -2ch DI/DO 2048 / 2048 ☆ - -
Function Block function ☆ ☆Embedded Ethernet ○ -Memory Card Editing / Operation ○ ○
Spindle control with servo motor ☆ -Protection of Data at Eight Levels ○ ○
Dynamic display language switching ○ ○
C language executor / FANUC PICTURE ☆ -FANUC NCGuide / FANUC NCGuidePro ☆ ☆FANUC Program Transfer Tool ☆ -FANUC CNC Setting Tool ☆ ☆
○ : Basic function ☆: Optional function -: Not available
Specification (2/2)FANUC Series 0i / 0i Mate - TD