Date post: | 10-Apr-2018 |
Category: |
Documents |
Upload: | rantharu-attanayake |
View: | 219 times |
Download: | 0 times |
of 18
8/8/2019 1 - Arm Bracket - Wildfire
1/18
8/8/2019 1 - Arm Bracket - Wildfire
2/18
8/8/2019 1 - Arm Bracket - Wildfire
3/18
8/8/2019 1 - Arm Bracket - Wildfire
4/18
8/8/2019 1 - Arm Bracket - Wildfire
5/18
8/8/2019 1 - Arm Bracket - Wildfire
6/18
8/8/2019 1 - Arm Bracket - Wildfire
7/18
8/8/2019 1 - Arm Bracket - Wildfire
8/18
8/8/2019 1 - Arm Bracket - Wildfire
9/18
8/8/2019 1 - Arm Bracket - Wildfire
10/18
8/8/2019 1 - Arm Bracket - Wildfire
11/18
8/8/2019 1 - Arm Bracket - Wildfire
12/18
8/8/2019 1 - Arm Bracket - Wildfire
13/18
13
ADDING THE ROUNDS
Click the Round Tool icon .
Enter 5 for the radius of the round.
Pick the two edges asshown. Make sure topress Ctrl key whenpicking the secondedges.
Click .
Click the Round Tool icon .
Enter 2 for the radius of theround.
Pick the two vertical edges asshown.
Click .
8/8/2019 1 - Arm Bracket - Wildfire
14/18
14
Mirror All the Geometry in a Part
Select the part name from the ModelTree . Pro/ENGINEER highlights all of the
part geometry in the graphics window.
From Edit pull down menu, select the
Mirror Tool .
Pick the left surface of the part as Mirrorplane.
Click .
8/8/2019 1 - Arm Bracket - Wildfire
15/18
15
CHANGE THE COLOR OF ARM BRACKET
From View pull down menu, select Colorand Appearance .
8/8/2019 1 - Arm Bracket - Wildfire
16/18
16
Click to add a new color.
To open Color Editor , pick
.
Pick .
8/8/2019 1 - Arm Bracket - Wildfire
17/18
17
Pick the desired color in the ColorEditor .
Click Close button.
8/8/2019 1 - Arm Bracket - Wildfire
18/18
18
Click Apply button to change the color of part.
Click Close button.
Click to save the part.