Date post: | 10-May-2018 |
Category: |
Documents |
Upload: | nguyendang |
View: | 213 times |
Download: | 0 times |
1Pannellature
verticaliStruttura telaio / Cabina armadio
Frame structure / Walk-in wardrobeStructure cadre / Dressing
Rahmen Begehbarer kleiderschrank
■Only - Iks pagina 1 ■ 3
L I M H AC E M E N TO
HINGE PRESENTATIONIKS DOOR
IKS DOOR WITH HIDDEN HINGESAll along, the main demand of designers and companies making furniture, is to reduce the aesthetic impact on the products, caused by the different systems of hardware, such as the opening hinges for wardrobes. Nowadays Trial has a solution for this and has developed, together with De-coma Design, the project IKS WITH HINGES: the hinges are put inside the top and the bottom of the wardrobe, so that it’s nomore necessary to make any workings on the side of the wardrobe, and since the hinges are hidden, they don’t cause any problem in the positioning of the shelves, inner equipment and in the opening of the drawers also.The hinge, with return spring and damper, can be adjusted in height, width and depth and can be used both for aluminium frame doors and for wooden doors of a maximum height of 3 meters.Trial has a standard frame door profile for aluminium door (IS-954), but to-gether with our technical office, the customer can customize this profile. The hinge too can be customized, putting the customer logo on the abs plate that covers the hinge. (in this case, there is a minimum requested quantity).For any more information or request, feel free to conatct us
* Per tutte le matrici presenti in questo capitolo / catalogo chiedere disponibilità e lunghezze barre a magazzino
1 ■ 3
1Pannellature
verticali
1 ■ 3
Only - Iks ■ Caratteristiche generali - General Features - Caractéristiques Générales - Allgemeine merkmale
L I M H AC E M E N TO
HINGE PRESENTATIONIKS DOOR
IKS DOOR WITH HIDDEN HINGESAll along, the main demand of designers and companies making furniture, is to reduce the aesthetic impact on the products, caused by the different systems of hardware, such as the opening hinges for wardrobes. Nowadays Trial has a solution for this and has developed, together with De-coma Design, the project IKS WITH HINGES: the hinges are put inside the top and the bottom of the wardrobe, so that it’s nomore necessary to make any workings on the side of the wardrobe, and since the hinges are hidden, they don’t cause any problem in the positioning of the shelves, inner equipment and in the opening of the drawers also.The hinge, with return spring and damper, can be adjusted in height, width and depth and can be used both for aluminium frame doors and for wooden doors of a maximum height of 3 meters.Trial has a standard frame door profile for aluminium door (IS-954), but to-gether with our technical office, the customer can customize this profile. The hinge too can be customized, putting the customer logo on the abs plate that covers the hinge. (in this case, there is a minimum requested quantity).For any more information or request, feel free to conatct us
Con questo sistema di ante la cerniera non è più in vista, non occorre più effettuare lavorazioni sul fianco del mobile e le cerniere non creano più impedimento al posizionamento dei ripiani o all’uso delle attrezzature interne, in particolar modo all’apertura dei cassetti. La cerniera è dotata di molla di richiamo e di ammortizzatore, è regolabile nelle 3 direzioni, altezza, larghezza e profondità e può essere usata sia su ante in legno che in alluminio fino ad un’altezza massima di 3 mt. Trial Alluminio propone un proprio profilo standard per la realizzazione di ante in alluminio (IS-954), ma lo stesso può essere personalizzato a disegno del Cliente.Only è un sistema di profili in alluminio per realizzare strutture di mobili, walk in closet e cabine.Il sistema comprende dei montanti con una cremagliera interna ed un piedino regolabile, dei traversi che si agganciano con giunti a scomparsa e dei profili per i tamponamenti laterali in vetro.Le porte possono essere realizzate in vetro con il sistema IKS di Trial, oppure con pannelli lignei.Flessibilità e valore estetico si coniugano in un sistema polivalente di facile utilizzo.
The hinges are put inside the top and the bottom of the wardrobe, so that it’s nomore necessary to make any workings on the side of the wardrobe, and since the hinges are hidden, they don’t cause any problem in the positioning of the shelves, inner equipment and in the opening of the drawers also.The hinge, with return spring and damper, can be adjusted in height, width and depth and can be used both for aluminium frame doors and for wooden doors of a maximum height of 3 meters. Trial has a standard frame door profile for aluminium door (IS-954), but the customer can customize this profile.ONLY is a system of aluminium profiles to realize structures for wardrobes and walk-in wardrobes.The system is made of vertical profiles with a rack inside and an adjustable foot, horizontal profiles that can be mounted with hidden joints, profiles used for closing the glass sides.The doors can be made of glass, using IKS system, or of wood.This system, of very simple use, combines flexibility and aesthetic value together. ONLY est un système de profilés en aluminium pour réaliser armoires et dressings.Le système est composé de profilés verticaux avec une crémaillère à l’intérieur et pieds réglables, profilés horizontaux avec pièces de connexion cachés, profilés pour fermer les côtés en verre.Les portes peuvent être en verre, en utilisant le système IKS, ou en bois.Flexibilité et valeur esthétique dans un seul système de facile utilisation.La charnière n’est pas visible, il n’est plus nécessaire de faire d’usinage sur le côté du meuble et, par suite, les charnières ne sont plus un obstacle pour positionner les rayons et pour l’ouverture des tiroirs. La charnière est équipée avec un ressort de rappel et un amortisseur et peut être utilisée pour des portes en aluminium et en bois aussi jusqu’à une hauteur de 3 mètres. Trial propose un profilé standard (IS-954), mais le client peut le personnaliser.
Only ist ein System aus Aluminiumprofilen, um Strukturen, Möbel und begehbare Kleiderschränke zu bauen.Das System besteht aus vertikalen Profile mit Innenzahnstangen, einem verstellbaren Fuß, Querträgern mit verdeckten Verbindungsstücken und Profilen für den Seitenwänden aus Glas. Die Türen können aus Glas mit dem IKS System bzw. mit Holzplatten hergestellt werden. Flexibilität und ästhetischer Wert verbinden sich in einem Mehrzweck-System, das einfach zu verwenden ist.Mit diesem Türsystem ist das Scharnier nicht mehr zu sehen, man müss nicht mehr Bearbeitungsvorgänge an der Korpusseite führen und die Scharniere verhindern nicht mehr die Anordnung der Regale, die Verwendung von Innenzubehören, insbesondere das Öffnen der Schubladen. Das Scharnier ist mit einer Rückstellfeder und Stoßdämpfer ausgestattet und ist in drei Richtungen (Höhe, Breite, Tiefe) einstellbar; es kann sowohl mit Holztüren als auch mit Aluminiumtüren bis zu einer maximalen Höhe von drei Metern verwendet werden. Trial bietet eine Standardprofil für die Herstellung von Aluminiumtüren (IS-954) aber das gleiche kann Kundenzeichnung angefertigt werden.
Trial
1 ■ 51 ■ 4
Schienale
Anta IKS Spalla ONLY
Fianchetto
Piani legno
Ripiani vetro
ONLY-IKS sistema cabina/armadio(only) e anta battente(iks)Only - Iks ■ Sistema cabina/armadio (only) e anta battente (iks)
1 ■ 51 ■ 4
1Pannellature
verticaliIks ■ Componenti anta battente
door profileprofilé porteTürprofil
handle / poignée / Griff
Giunto angolare di collegamento dx/sx IS-Gright/left connecting jointpièce de connexion droite/gaucheVerbindungsstück rechts/links
Cerniera dx/sx IS-C21 (molla leggera) right/left hinge (light spring)charnière droite/gauche (ressort souple)Scharnier rechts/links (leichte Feder)
IS-C33 (molla più dura)+ mostrina di coperturaright/left hinge (strong spring)+ cover for hinge+ 2 screws M4X10tsptcIS-C33charnière droite/gauche (ressort dur)
Vite m4x10tsptc+ couverture pour charnière+ 2 vis M4X10tsptcScharnier rechts/links (harte Feder)+ Bedeckung für Scharnier+ 2 Schrauben M4X10tsptc
Giunto angolare di collegamento dx/sx IS-Gright/left connecting jointpièce de connexion droite/gaucheVerbindungsstück rechts/links
Cerniera dx/sx IS-C21 (molla leggera) right/left hinge (light spring)charnière droite/gauche (ressort souple)Scharnier rechts/links (leichte Feder)
IS-C33 (molla più dura)+ mostrina di coperturaright/left hinge (strong spring)+ cover for hinge+ 2 screws M4X10tsptcIS-C33charnière droite/gauche (ressort dur)
1 ■ 71 ■ 6
OL-P
OL-GTC
Profilo cremagliera BF-914
OL-GTSI
Piedino regolatore
Vite autofilettante 3.5x13 tstc
Basetta
Traversino sup/inf OL-965
Vite m5x8 tstc
Vite m5x20 tstc
Reggitraversino
Blocco per traverso sup/inf OL-966
Traverso sup/inf OL-965
Vite m5x50 tcei
Grano blocco posizionetraverso
Montante Ol-953
Blocchetto fissaggio montante
ONLY componenti armadioOnly ■ Componenti armadio
note: Part A non included in the hingeà noter: Partie A pas incluse dans la charnière
Teil A nicht einschließlich
ARMADIO ONLYONLY WARDROBE
ARMOIRE ONLYONLY SCHRANK
OL-953vertical profile Only wardrobe
profil vertical armoire OnlySenkrehtes Profil Only Schrank
OL-967side profileprofil coté
Seitenprofil
OL-965upper/lower horizontal profile Only wardrobe
Profil horizontal sup./inf. armoire OnlyAluquerträger Only Schrank
OL-GTSIconnecting joint for upper/lower horizontal profile
to the vertical onepièce de connexion profil horizontal sup./inf avec
profil verticaloberes / unteres Verbindungsstück: senkrehtes
Profil mit horizontalemProfil
OL-GXPupper/lower connecting joint: profile to the wall
pièce de connexion sup./inf.: profil à muroberes / unteres Verbindungsstück: Wandprofil
OL-GTCconnector for central cross-bar + nr. 1 screw M5X20 TSPTC
pièce de connexion profil central + nr. 1 vis M5X20 TSPTCVerbindungsstück für Aluquerträger + 1 Schraube M5X20
TSPTC
OL-Padjustable foot + plate + 2 screws
pied réglable + platine + 2 visVerstellbarer Fuß + 2 Schrauben=
1 ■ 71 ■ 6
1Pannellature
verticali24
24
Profilo anta IS-954
Giunto angolare di collegamento anta IS-G + vite m4x10 tsptc
Vetro spessore 4mm
Profilo fianchettoOL-967
Vetro spessore 4mm
FianchettoSchienale
Serigrafia vetro
ONLY particolare schienale/fianchettoIks ■ Particolare schienale / fianchetto
1 ■ 91 ■ 8
ONLY a parete con ante IKSOnly - Iks ■ a parete con ante IKS
1 ■ 91 ■ 8
1Pannellature
verticaliONLY a parete
Only ■ a parete
1 ■ 111 ■ 10
OL-GTSIgiunto di collegamento montante/traverso sup/inf
OL-GXPgiunto di collegamento montante/parete sup/inf
OL-Ppiedino e regolatore cremagliera
2
1
1
2
3
26
3
Quota necessaria per aggancio mensola
Mensola vetro emensola legno
Mensola legno
-1--2-
-3-
ONLY a pareteOnly ■ a parete
1 ■ 111 ■ 10
1Pannellature
verticaliOnly a soffittoOnly ■ a soffitto
1 ■ 131 ■ 12
26
3
OL-PRSIpiedino inferiore regolatore montante
OL-GXPgiunto di collegamento montante/parete
OL-GTSIgiunto di collegamento montante/traverso
OL-PRSSpiedino superiore regolatore montante
-5 -
Mensola legno
Mensola vetro emensola legno
Quota necessaria per aggancio mensola
-1-
-2-
-2-
-1-
-5-
-4- -4-
-1--2-
ONLY a soffitto
Only ■ a soffitto
1 ■ 131 ■ 12
1Pannellature
verticaliOnly - Iks ■ Componenti