EDUCATION TRUSTAn Autonomous Institution Approved by UGC/ AICTE/ Govt. of KarnatakaAccredited by NAAC-UGC with "A" grade, UG Programs, Accredited by NBA (Tier-1)Affiliated to VTU, Belagavi. Bengaluru - 560 064, India. www.nmit.ac.in
NITTE MEENAKSHI INSTITUTE OF TECHNOLOGY
India Rankings 2018
Among IITs,NITs/Universities andother Engineering Institutions
100 th
Publication Partner
About Us
Nitte Meenakshi Institute of Technology (NMIT), Bengaluru, established in the year 2001 is a
Private, Self-financing, an Autonomous Institution (Approved by the UGC). NMIT is ranked
among the top 100 institutes of NIRF ranking in 2018. The institute is permanently affiliated to the
Visvesvaraya Technological University (VTU) Belagavi and is approved by the AICTE, New
Delhi. NMIT is a unit of Nitte Education Trust (NET), Mangalore which is pioneer in the field of
education since 38 years and brings with it the expertise of 36 Institutions which include Nitte
University and institutions of higher education like Engineering, Management, Medicine, Dental,
Pharmacy, etc.
NMIT has been accredited by the National Assessment and Accreditation Council (NAAC-UGC)
with 'A' Grade since May 2014 for a period of 5 years and also has different UG programs
accredited by the National Board of Accreditation (NBA) under Tier-1 scheme. It is the only
unaided private engineering college in Karnataka State selected by the Govt. of India for World
Bank Funding under TEQIP Phase II- Subcomponent 1.1 in the year 2011. NMIT offers wide range
of academic programs comprising of Seven UG and Eight PG programs in Engineering besides
MBA and MCA. Ten Departments of NMIT offer Doctoral programs of VTU / University of
Mysore. Highly qualified and experienced faculty members comprising 70 PhD holders primarily
from the IISc, IITs and NITs are on the rolls of the NMIT. An additional 90 plus Faculty members
are pursuing PhD in different research centres of the NMIT as well as in other Universities of
Eminence.
Having a strong focus towards achieving excellence in education, research and promotion of
innovation and entrepreneurship, the NMIT has several sponsored research projects amounting to
Rs.10 Crores sanctioned by different reputed national funding agencies such as the DST, DIT,
AICTE, DRDO Labs. To promote multidisciplinary research, NMIT has established Six State-of-
the-art Centres of Excellence on Small Satellites, Robotics, Nanomaterials & MEMS, Design
Engineering and Process Simulation, Computational Fluid Dynamics, Aerospace and IoT.
Similarly, and Innovation and Entrepreneurship development centre was established in the year
2010 and was funded with Rs. 45 lakhs by the Department of Science and Technology
(NSTEDB), New Delhi and a Business Incubator was supported by the MSME (Micro, Small and
Medium Enterprises), Govt. of India. the NMIT is recognised by the ISRO for undertaking
collaborative research on Space Technology and Satellite development. NMIT has led a consortium
that designed and built STUDSAT-1, a satellite of PICO category launched by ISRO's PSLV-C15 on
12 July 2010. This success is listed in the Limca book of Records. Moreover, the development of a
working model of Pick & Place Robot has been kept as a permanent exhibit in Birla Science Center,
Hyderabad. The institute has collaborations with North Dakota State University, USA, Indo-
Korean Institute of Science & Technology, ISRO, Indian Institute of Science, NITK, Fluidyne etc.
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
ERCAM - 2019 is now accepting papers on the following topics through its system.If you have a paper on an additional topic, please write an email to [email protected]
ERCAM - 2019Today, multi disciplinary research has become vital in the development of a wide range of technological processes and systems. The role of Civil, Aeronautical and Mechanical Engineering in the country's economy and societal evolution has long been demonstrated.
Some of the areas that are drawing the attention of researchers, the world over, in developing a wide range of engineering technologies are Advanced Material, Mechanics of Engineering Components, Engineering Structures and Systems etc.
This International Conference, ERCAM-2019, is envisaged to bring together specialists and practitioners from various Industries, R&D institutes and Academicians, thereby providing a forum for exchange of knowledge on recent trends in major sectors of materials, processes and systems pertaining to Civil, Aeronautical and Mechanical Engineering.
The Second International Conference focuses on the theme Materials, Mechanics, Structures and Systems. The conference will bring together leading academicians scientists, researchers and industry experts in the domain of interest from across the world. Topics of interest for submission include, but are not limited to the following
Mechanical Engineering Civil Engineering Aeronautical EngineeringTheme
Tracks
• Computational Mechanics• Solid mechanics• Mechanics of Functional Graded Material (FGMs), Porous and Nano-composites• Tribology• Biomechanics • Non-Newtonian fluid flow• Turbulent fluid flow
• Sensors and structural identification• MEMS/NEMS• Vibration, Acoustics and Condition Monitoring• Thermal/Fluid systems & Analysis• CAD/CAM/CAE & Robotics
Materials
Mechanics
Structures
Systems
• Linear, Non-linear, Solid-Fluid
interaction
• Computational and Applied
Mechanics in Aerospace systems
• Analytical Methods and Solution
Mechanism
• Virtual method in Aerospace system, Materials management• Advances in Aerospace technologies.• Optimization Technic• Reliability Analysis• System Design
• Advanced materials for Structural,
Geotechnical, Hydraulic Structures
and Transportation Applications
including Micro and Nanomaterials
• Solid and Fluid Mechanics
• Computational Mechanics of Civil
Engineering Structures
• Static and Dynamic behaviour of Civil Engineering Structures
NDT in Civil Engineering•Reliability Analysis and Optimisation •
Techniques
Earthquake Resistant Analysis and • Design of Structures
• Structural Systems, Fluid Flow
Systems for Civil Engineering
including IoT, BigData, AI and
such applications for Smart
Constructions and Maintenance
• Kinematics & Dynamics• Fatigue, Fracture & life cycle Analysis• Smart Structures-Vibration & noise control• Bio-Inspired Structures• Structural health monitiring• Biomechanical designs & Applications• Fluid-StructureInteractions
• Smart and multifunctional composite materials• Nano materials• Metal Alloys, Ceramics, Graphene and Polymers• Environmental and Green Materials• Energy harvesting materials• Bio Materials• Thermal/Fluid systems & Analysis• CAD/CAM/CAE & Robotics
• Static and Dynamic behaviour of
Aerospace Structures and materials
• NDT in Aerospace systems
• Conventional/Non-conventional
method in structural design
• Optimization of Aerospace
structures Steleth structures
High enthalpy materialsHigh temperature materials,compositesConventional Aerospace materialsand metalsAdvanced materials and manufacturingSmart and intelligent materialsAnti-MatersNano Carbon Tubes
••
•
•
•••
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Call for Papers
Chief Patrons
Dr. N V Hegde, President, Nitte Education Trust Advisor, Nitte Education TrustDr. N R Shetty,
General Chair
Dr. H C Nagaraj, Principal, NMIT, Bengaluru
Keynote Speaker
Technical Programme Chairs
Dr. P. K. Dash, Professor and Head, Aeronautical Engineering, NMIT, Bengaluru
Dr. Sudheer Reddy J. Professor and Head, Mechanical Engineering, NMIT, Bengaluru Dr. Bharathi Ganesh, Professor and Head, Civil
Engineering, NMIT, Bengaluru
Prof. Mohammad Jawaid, UPM - Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products (INTROP).
Manuscripts are invited for the Second International Conference on Emerging Research in Civil, Aeronautical and
Mechanical Engineering (ERCAM'19). Prospective authors are invited to submit full length original research
papers which have not been submitted/ published/ under consideration any where in other conferences/ journals.
Papers should be in English, which is the official language of the conference.
All the submitted manuscripts will be sent for double-blinded peer review and the corresponding authors will be
notified about the outcome of the review process. Full Papers are limited to 6 pages.
All submitted papers must comply with the template available in www.nmit.ac.in/ercam2019Manuscripts in electronic format (DOC, DOCX only) to be submitted via http://easychair.org/cfp/ercam2019
Publishers : All Accepted Manuscirpts will be Published in Springer Lecture notes or AIP Conference
Proceedings
July 25 and 26, 2019
February 25, 2019
March 15, 2019
April 10, 2019
Conference Dates
Paper Submission Deadline
Notification to Authors
Registration Deadline
:
:
:
:
Important Dates
Prof. Sundararajan Natarajan, Indian Institute of Technology - Madras India
"THE BEST PAPER WILL BE REWARDED"
Note : Registration of one of the authors for the conference is mandatory. Registration fee includes the publishing charges of the accepted paper in the Journal, registration kit, lunch on both the days & conference Banquet .
Rs. 2,500/- will be charged for Non-Authors/Accompanying person.
Institutions with more than 5 papers accepted for publication will be given a special discount in registration of Rs. 1,000/- per paper.
Registration fees
Category
R & D Organization / Industry
Faculty members from Academic institutions
Research Scholars from institutions
Registration Fees
Indian Foreign
Rs. 8,000/-
Rs. 5,500/-Rs. 4,500/-
USD 225
USD 150USD 125
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Technical Programme CommitteeDr. P. G. Mukunda, Mechanical Engineering, NMIT, Bengaluru
Dr. Sekhar Majumdar, Mechanical Engineering, NMIT, Bengaluru
Dr. P. B. Shetty, Mechanical Engineering, NMIT, Bengaluru
Dr. Seetharamu. S, Mechanical Engineering , NMIT, BengaluruDr. B. K. Muralidhara, Mechanical Engineering, NMIT, Bengaluru
Dr. Kiran Aithal S, Mechanical Engineering, NMIT, BengaluruDr. Desai Gowda, Mechanical Engineering, NMIT, BengaluruDr. Madhusudhan, Mechanical Engineering, NMIT, BengaluruDr. Vidyavathi N, Civil Engineering, NMIT, BengaluruDr. Ramesh B. R, Civil Engineering, NMIT, Bengaluru
Dr. Durga Prasad, Civil Engineering, NMIT, BengaluruMr. Vinayaka N, Aeronautical Engineering, NMIT, Bengaluru
Dr. Srikanth H. V, Aeronautical Engineering, NMIT, Bengaluru
Advisory CommitteeDr. Alberto Milazzo, Department of Civil, Environmental, Aerospace, and Materials Engineering, University of Palermo, ITALY.
Dr. Farzad Ebrahimi, Department of Mechanical Engineering, Imam Khomeini International University, Qazvin, Iran
Dr. Maria AméliaRamos Loja, Department of Mechanical Engineering, Instituto Politécnico de Lisboa, Lisbon, PORTUGAL.
Dr. Mohammad Jawaid, UPM - Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products (INTROP),
MALAYSIA.
Dr. Kunigal N Shivakumar, Department of Mechanical Engineering, North Carolina A&T State University, Greensboro, USA.
Dr. Satish Vasu Kailas, Department of Mechanical Engineering, Indian Institute of Science, Bengaluru, INDIA.
Dr. Anantha Suresh GH, Department of Mechanical Engineering, Indian Institute of Science, Bengaluru, INDIA.
Dr. Arun M Umarji, Department of Materials Research Center, Indian Institute of Science, Bengaluru, INDIA.
Dr. B.S. Murthy, Department of Metallurgical and Materials Engineering, Indian Institute ofTechnology Madras, INDIA.
Dr. Satyabodh M Kulkarni, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, INDIA.
Dr. K.V. Gangadharan, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, INDIA.
Dr. S. Narendranath, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, INDIA.
Dr. Subhaschandra Kattimani, Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, INDIA.
Dr. Niranjan Sahoo, Department of Mechanical Engineering, Indian Institute of Technology Guwahati, INDIA.
Dr. Joy Thomas, High Voltage lab, Indian Institute of Science Bengaluru, INDIA.
Dr. Ramesh Talreja, Department of Aerospace Engineering, Texas A&M University, USA.
Dr. Vikas Tomar, School of Aeronautics and Astronautics, Purdue University, USA.
Dr. Karisiddappa, Vice-Chancellor, VTU, Belagavi, INDIA
Dr. H. N. Jagannatha Reddy, Registrar, VTU, Belagavi, INDIA
Dr. Krishna Reddy, Civil and Material University of Illinois at Chicago, Chicago
Dr. Venkatesh Kodur, Department of Civil Engineering, Michigan State University, USA.
Dr. Mijia Yang, Department of Civil Engineering, North Dakota State University, USA
Dr. J. M Chandra Kishen, Department of Civil Engineering, IISc, Bangalore, INDIA.
Dr. N. Subramanyam, Managing Director, Gaithersburg, MD, USA.
Dr. Shamsher Bahadur Singh, Department of Civil Engineering, BITS Pilani, Rajasthan,INDIA.
Dr. Brijesh Nair, Department of Civil Engineering, VIT, Vellore, Andra Pradesh, INDIA.
Dr. Clement Solomon, Department of Civil Engineering, West Virginia University, USA
Dr. Nabil Grace, Department of Civil Engineering, Lawrence Technological University, USA.
Dr. V. Sridhar, Dean (Academic), NMIT, Bengaluru, INDIA.
Dr. Jharna Majumdar, Dean (R&D), NMIT, Bengaluru, INDIA.
Mr. Rohit Punja, Administrator, NMIT, Bengaluru, INDIA.
Department of Engineering,
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Mr. Mahendra M. A, Aeronautical Engineering, NMIT, Bengaluru
Mr. Vinod L, Aeronautical Engineering, NMIT, Bengaluru
Mr. Kiran M. U, Civil Engineering, NMIT, Bengaluru
Mr. Manjunath L, Civil Engineering, NMIT, Bengaluru
Mr. Samir Kumar Panda, Mechanical Engineering, NMIT, Bengaluru
Mr. Mrutyunjay Maharana, Mechanical Engineering, NMIT, Bengaluru
Organizing Committee
REGISTRATION FORM
SECOND INTERNATIONAL CONFERENCE ONEmerging Research in Civil, Aeronautical and Mechanical Engineering
(ERCAM-2019)July 25-26, 2019
Name : .......................................................................................................................................................
Designation : ..............................................................................................................................................
Name of the Institute/Organization : .........................................................................................................
Address : ....................................................................................................................................................
Contact No. : ..............................................................................................................................................
E-mail : ......................................................................................................................................................
Qualification : ............................................................................................................................................
Payment Details :
Name of the Bank : .....................................................................................................................................
D.D. No. ............................... Dated.................................. Amount Rs. ..............................................
Certified that the above information is true and correct to the best of my knowledge and belief.
DECLARATION
Certified that Mr./Mrs./Ms./Dr./.............................................................................................. is working in this institution / college / organization as ............................................................... (designation). He/She is permitted to attend the International Conference which will be held at NMIT, Bengaluru.
Signature of the Applicant
Signature of the Head of the Institution
Name and Designation .......................................
Guidelines for Registration
Sponsorship
Registration Fee is to be paid in the form of
1) Cheque / Crossed Demand Draft drawn in favor of “The Principal, Nitte Meenakshi Institute of
Technology” payable at Bangalore
2) Wire transfer through NEFT as per the following details:
Name: Nitte Meenakshi Institute of Technology
Account No: 094010100165396 IFSC Code: UTIB0000094
MICR Code: 560211006 Swift Code: AXISINBB094
Permanent Account No (PAN): AAATN2284K
Bank: Axis Bank Branch: Yelahanka
Place: Bangalore Country: India
NOTE: Mention the Paper ID or the Registered Author's Name in the subject.
CATEGORIES
PLATINUM SPONSOR'S FEE: Rs 1,00,000/-
Eligibility
·15 minutes presentation time after key note speeches to the audience in the seminar hall.
·Three complimentary conference registrations with kits.
·Logo on the main conference banner.
·One Stall to exhibit their products and posters.
·Logo on the Front cover page of the souvenir and Full page advertisement in the Souvenir
GOLD SPONSOR'S FEE : Rs. 50,000/-
Eligibility
·Two complimentary full conference registrations
·Logo on Main conference banner
·Three complimentary conference registrations with kits
·Logo on the Back cover page of the souvenir and Half page advertisement in the Souvenir
SILVER SPONSOR'S FEE: Rs 25, 000/-
Eligibility
·One complimentary full conference registrations with kit
·Logo on main conference banner
·One conference kit
·Logo on the Back cover page of the souvenir & 1/4 page advertisement in the Souvenir
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
Second International Conference
on Emerging Research in
Civil, Aeronautical and Mechanical Engineering ERCAM - 2019
EDUCATION TRUST
Conference Location
Contact us
Conference Chairs
Dr. P. K. Dash
Dr. Sudheer Reddy J.
Dr. Bharathi Ganesh
Bangalore (Bengaluru) - The Garden City
Bengaluru (also called Bangalore) is the capital city of Karnataka state. The Silicon Valley of India is its nickname of the Indian city of Bengaluru and is a comparative reference to the original Silicon Valley, because of its role as the nation's leading information technology (IT) exporter. Indian technological organizations ISRO, NAL, HAL, GTRE, ADA etc. Are headquartered in the city. A demographically diverse city, Bangalore is the second fastest-growing major metropolis in India. Bangalore has one of the most highly-educated workforces in the world. It is home to many educational and research institutions in India, such as the Indian Institute of Science (IISc), Indian Institute of Management (Bangalore) (IIMB), International Institute of Information Technology, Bangalore (IIITB), National Institute of Fashion Technology, Bangalore, National Institute of Design, Bangalore (NID R&D Campus), National Law School of India University (NLSIU) and National Institute of Mental Health and Neurosciences (NIMHANS). Numerous Aerospace and Defence Organizations, such as Bharat Electronics, Hindustan Aeronautics and National Aerospace Laboratories are located in the city.
Predicted Weather in July ° Average Temperature 26 C
Chance of Sunny Day 2 %Chance of Rain 40 %Chance of Cloudy Day 27%
Professor & Head -Aeronautical Engineering
Mobile : +91-63626 21490
E-mail : [email protected]
Professor & Head - Mechanical Engineering
Mobile : +91-95381 12366
E-mail : [email protected]
Professor & Head-Civil Engineering
Mobile : +91-9481034559
E-mail : [email protected]
Conference SecretaryDr. Vinyas. M
Chief Co-ordinators Dr. Kiran Aithal S.
Asst. Professor, Mechanical EngineeringMobile : +91 63623 54993Email : [email protected]
Professor, Mechanical EngineeringMobile : +91 98451 33607Email : [email protected]
Supporting Organization
Association of ConsultingCivil Engineers (India)
NMIT