1.1.1 2018 edition - Studer · Training opportunities Fritz Studer AG Steffisburg ... Basic course...

1/42

1.1.1 2018 edition

4.06.03MRL

2/42

Training opportunities Fritz Studer AG Steffisburg Pages 3 - 34

Contacts D. Zürcher 0041 33 439 15 13 [email protected] S. Frei 0041 33 439 16 25 [email protected]

Training opportunities Fritz Studer AG Skills Center for Internal Grinding, Biel Pages 34 - 42

Contacts M. Lüdi 0041 32 344 84 25 [email protected] C. Mastroianni 0041 32 344 04 36 [email protected]

mailto:[email protected]




3/42

Sta

nda

rd c

ours

es

Basic course -cylindrical grinding

General cylindrical grinding

Operation and programming

Fanuc 0i-TD external grinding

Fanuc 0i-TD internal universal

StuderWIN external grinding

StuderWIN internal universal

StuderWIN internal grinding

Retraining for StuderWIN

StuderWIN focus

S242 grinding, hard turning

Studer WireDress®

Maintenance and service

IHE electrical Fanuc with PC

IHM mechanical

StuderGRIND and Integrated Tools

See supplementary sheet

Instr

uction &

consultin

g

Instruction & consulting at Studer Steffisburg, 2 days

Instruction & consulting at Studer Steffisburg, 3 days

Instruction & consulting at customer’s plant

4/42

Stu

de

rGR

IND

Ba

sis

(off

line p

rogra

mm

ing)

StuderTECHNOLOGY

StuderDRESS 2.x CAD program Vector

StuderCONTOUR CAD program Vector

Inte

gra

ted

To

ols

for

Stu

de

rWIN

StuderTECHNOLOGY integratedTraining integrated into StuderWIN operator course

StuderDRESS integrated CAD program Vector

StuderCONTOUR integrated CAD program Vector

StuderTHREAD integratedMachines without A-axis

CAD program Vector

StuderTHREAD integratedMachines with A-axis

CAD program Vector

StuderFORM integrated CAD program Vector

StuderFORMHSM integrated CAD program Vector

StuderPUNCH integrated CAD program Vector

optional

optional

5/42

Course title Order no. Course duration

Basic course - cylindrical grinding A9904557 4 days.

Operation and programming of Fanuc External grinding

A9904333 4 days.

Operation and programming of Fanuc Internal grinding with universal

grinding machines A9904280 ½ day

Operation and programming of StuderWIN External grinding

A9904357 4 days.

Operation and programming of StuderWIN Internal grinding with

universal grinding machines 60003115 ½ day

Operation and programming of StuderWIN Internal grinding with

internal grinding machines 60006129 4 days.

Retraining for StuderWIN 60011099 3 days.

Operation and programming StuderWIN focus

60013110 3 days.

Operation and programming of S242 Grinding and hard turning

60003113 4 ½ days

Operation and programming Studer WireDress®

60020221 3 days.

Maintenance and service, IHM "Mechanical"

A9904326 2 ½ days

Maintenance and service, IHE "Electrical" Fanuc with integrated PC

A9904275 2 ½ days

6/42


StuderGRIND "Basis" A9904338 ½ day

StuderTECHNOLOGY A9904339 ½ day

StuderDRESS 2.x A9904341 1 day.

StuderCONTOUR A9904358 1 day.

StuderDRESS integrated: 60008130 ½ day

StuderCONTOUR integrated 60008131 1 day.

StuderTHREAD integrated (machines without A-axis) 60008132 1 ½ days

StuderTHREAD integrated (machines with A-axis) 60016342 2 days.

StuderFORM integrated 60008133 2 days.

StuderFORMHSM integrated 60008134 3 days.

StuderPUNCH integrated 60008412 2 days.

CAD program Vector 60008138 1 day.

Instruction and consulting at the customer's site

A9904291 as agreed

Instruction and consulting at Studer (only with topics in agreement with the instructor)

60017812 2 days.

Instruction and consulting at Studer (only with topics in agreement with the instructor)

60017813 3 days.

7/42

Basic course - cylindrical grinding

Order number: A9904557

Machine types: - No special machines involved

Target group: - Operators and installers of cylindrical grinding machines

Basic requirements - Every participant should have basic technical training.

Objective: - Participants acquire a general basic knowledge of cylindrical grinding.

Course contents: - Grinding wheels: corundum, CBN and diamond - Flange-mounting, balancing, safety regulations. - Dressing - Cooling lubricants - Clamping workpieces. - Measuring technology. - Grinding errors. - Grinding data - Grindingcycles - Steady rest - Internal grinding.

Languages: (as agreed) - German - English - French - Italian

Number of participants: - From 4 up to a max. of 6 persons.

Course place: - Fritz Studer AG, Thunstrasse 15, CH-3612 Steffisburg, Switzerland

Course duration: - 4 days.

Services: - Course documentation - 4 lunch

Price: according to price list, per person, without travel and accommodation costs

8/42

Operation and programming of Fanuc 0i-TD

“External Grinding”

Order number: A9904333 Target group:

- Users and programmers of CNC machine tools.

Basic requirements - Every participant must already have knowledge of cylindrical grinding and NC-programming. - Further knowledge of ISO code programming would be advantageous.

Objective: - Participants acquire solid basic knowledge of the control system in the area of external grinding.

Course contents: - Controls and control system. - Programming of workpiece, contour and grinding wheel programs. - Mechanical handling - SET-UP - Grinding - Quick-Set (option)




Course duration: - 4 days. - This course precedes the course "Internal grinding with universal grinding machines" (order no. A9904280).



9/42

Operation and programming of Fanuc 0i-TD

"Internal grinding with universal grinding machines"


Target group: - Users and programmers of CNC machine tools.

Basic requirements - Participants must be able to operate and program the Fanuc control system 16TB/16i/21i/160i/0i-TD on Stu-

der machines. - Knowledge of ISO code programming would be advantageous.

Objective: - Participants acquire a basic knowledge in the area of internal grinding.

Course contents: - Programming workpiece programs related to internal grinding - SET-UP - Grinding




Course duration: - ½ day - This course follows the course "External grinding" (order no. A9904333).

Services: - Course documentation


10/42

Operation and programming of StuderWIN

“External Grinding”



Basic requirements - Every participant must already have knowledge of cylindrical grinding and NC-programming. - Further knowledge of ISO code programming would be advantageous. - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire solid basic knowledge of the control system with the StuderWIN interface in the area of

external grinding and the application of "StuderTECHNOLOGY integrated."

Course contents: - Controls and control system. - Programming of workpiece, contour and grinding wheel programs. - Mechanical handling - Accessories Service - SET-UP - Grinding - StuderTECHNOLOGY integrated




Course duration: - 4 days. - This course precedes the course "Internal grinding with universal grinding machines" (order no. 60003115).



11/42


"Internal grinding with universal grinding machines"

Order number: 60003115


Basic requirements - Participants must be familiar with the "StuderWIN" interface. - Further knowledge of ISO code programming would be advantageous. - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire a basic knowledge in the area of internal grinding.

Course contents: - Programming workpiece programs related to internal grinding - SET-UP - Grinding - StuderTECHNOLOGY integrated




Course duration: - ½ day - This course follows the StuderWIN course "External grinding" (order no. A9904357).



12/42


"Internal grinding with internal grinding machines"





internal grinding and the application of "StuderTECHNOLOGY integrated."

Course contents: - Controls and control system. - Programming of workpiece, contour and grinding wheel programs. - Mechanical handling - SET-UP - Grinding - StuderTECHNOLOGY integrated




Course duration: - 4 days



13/42

Retraining for StuderWIN


Target group: - Experienced operators and programmers of Studer CNC cylindrical grinding machines

Basic requirements - Every participant must already have experience with a Studer cylindrical grinding machine with Fanuc control

system 16, 21 or 160 and with Release B, C, or D. - Safe programming with pictogramming - Safe setup and conversion - Safe application of the Quickset software option in retraining for StuderWIN with Quickset - Knowledge of how to use a PC with a Windows interface


external and internal grinding and the application of "StuderTECHNOLOGY integrated."

Course contents: - Workpiece-oriented programming with StuderWIN - StuderTECHNOLOGY integrated - SET-UP - Grinding







14/42

Operation and programming of StuderWIN focus

External Grinding




Objective: - Participants acquire solid basic knowledge of the control system with the StuderWIN focus interface in the

area of external grinding.

Course contents: - Controls and control system. - Programming of workpiece and grinding wheel programs - Micro-functions (option) - Mechanical handling - STUDER base value calculator - Accessories Service - SET-UP - Grinding







15/42

Operation and programming of S242

"Grinding and hard turning"


Target group: - Operators and programmers of the Studer S242 Combined Machining System

Basic requirements - Every participant must already have knowledge of cylindrical grinding and NC-programming. - Knowledge of ISO code programming is mandatory. - Knowledge of how to use a PC with a Windows interface


grinding and hard turning, and the possible application of "StuderTECHNOLOGY integrated" in the area of grinding.

Course contents: - Controls and control system. - Programming workpiece programs - Programming workpiece contours for turning - Mechanical handling - Accessories Service - SET-UP - Grinding - Hard turning - StuderTECHNOLOGY integrated (for grinding)




Course duration: - 4 ½ days



16/42

Operation and programming Studer WireDress®


Target group: - Experienced operators and programmers of Studer CNC cylindrical grinding machines with StuderWIN

Basic requirements - All participants should already have experience with a Studer cylindrical grinding machine with StuderWIN. - Safe programming with pictogramming - Safe setup and conversion - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire solid basic knowledge of using Studer WireDress. At the end of the course, they are

able to independently create grinding wheel contour programs and re-profiling programs.

Course contents: - Instruction in the Co2 extinguishing system - Operation of StuderDRESS - Mechanical handling of WireDress - Programming and technology parameters in WireDress - Accessories and wear parts - SET-UP - Profiling the grinding wheel

Note If the required contours cannot be made via Geo-import or contour editor, they must be drawn using a CAD system (e.g. Vector) and imported as a DXF file.







17/42

Maintenance and service, Fanuc CNC control sys-tem with integrated PC

"Electrical"


Target group: - Service and maintenance personnel of CNC machines.

Objective: - The participants are able to carry out error localization using the diagnostics screens. - The participants can identify simple errors and defects in the electrical/electronic system.

Course contents: - Safety briefing - Control system and PC (hardware layout, software, interfaces, bus systems) - Briefing on basic operation - Creating and retrieving data backups - Referencing axes - Replacing batteries and fuses - Using the DualCheckSafety function - Troubleshooting in practice




Course duration: - 2 ½ days - The courses Maintenance and service – "Mechanical" and "Electrical" normally take place in succession

within the same week.

Services: - Service documentation mechanical system SDM (German/English/French/Italian) and Fanuc maintenance

manual - 2 lunch


18/42

Maintenance and service

“Mechanical”


Target group: - Service and maintenance personnel of CNC machines.

Objective: - The participants can identify defects in the mechanical system and potentially rectify them themselves. - The participants are able to carry out service and maintenance work autonomously. - (No repair training, e.g. resetting machine geometry after a collision)

Course contents: - Safety, transport, and commissioning briefing - Briefing on basic operation - Mechanical layout of the machine, incl. X and Y axis length measuring system - Module assembly: workhead/tailstock/wheelhead/swiveling table - Drive of X and Z axes - Axis/spindle lubrication/hydraulics/pneumatics




Course duration: - 2 ½ days - The courses Maintenance and service – "Mechanical" and "Electrical" normally take place in succession

within the same week.

Services: - Service documentation mechanical system SDM (German/English/French/Italian) - 2 lunch


19/42


"StuderGRIND Basis"


Target group: - Operators and programmers of Studer CNC cylindrical grinding machines with Fanuc control system - Serves as the basis for other software tools

Prerequisite: - Knowledge of how to use a PC with a Windows interface - Every participant must already have operating and programming knowledge of STUDER CNC cylindrical

grinding machines. - Previous knowledge in ISO programming would be advantageous.

Objective: - Participants acquire solid basic knowledge of StuderGRIND. At the end of the course, they are able to auton-

omously create a workpiece program with StuderGRIND.

Course contents: - Operation of "StuderGRIND Basis" - Workpiece-oriented program creation and data storage - Working out of examples. - Data transfer from PC to CNC control system




Course duration: - ½ day - This course precedes the course "StuderTECHNOLOGY" (order no. A9904339).



20/42


"StuderTECHNOLOGY"


Target group: - Operators and programmers of Studer CNC cylindrical grinding machines with Fanuc control system - Calculation, job planning and bidding employees

Prerequisite: - Knowledge of "StuderGRIND Basis" - Knowledge of how to use a PC with a Windows interface - Every participant must already have operating and programming knowledge of STUDER CNC cylindrical

grinding machines.

Objective: - Participants acquire solid basic knowledge of "StuderTECHNOLOGY." At the end of the course, they are

able to autonomously create an optimized workpiece program with simulation and calculation using Studer-GRIND.

Course contents: - Operation of "StuderTECHNOLOGY" - Workpiece-oriented program creation with dynamic technology value propositions - Grinding technology, grinding times and unit cost calculation - Simulation - Working out of examples.




Course duration: - ½ day - This course follows the course "StuderGRIND Basis" (order no. A9904338).



21/42


"StuderDRESS 2.x"


Target group: - Operators and programmers of Studer CNC cylindrical grinding machines with Fanuc control system


grinding machines.

Objective: - Participants acquire solid basic knowledge of "StuderDRESS 2.x." At the end of the course, they are able to

autonomously create grinding wheel contour programs and re-profiling programs.

Course contents: - Operation of StuderDRESS 2.x - Contour editor - Geo-import - Working out of examples.

Note If the required contours cannot be made via Geo-import or contour editor, they must be drawn using a CAD system (e.g. Vector) and imported as a DXF file.




Course duration: - 1 day. - "CAD program Vector" can serve as a supplement (order no. 60008138).



22/42


"StuderDRESS integrated"


Target group: - Operators and programmers of Studer CNC cylindrical grinding machines with Fanuc control system and

StuderWIN interface

Prerequisite: - Knowledge of the StuderWIN interface - Every participant must already have operating and programming knowledge of STUDER CNC cylindrical

grinding machines. - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire solid basic knowledge of "StuderDRESS integrated." At the end of the course, they are

able to autonomously create re-profiling programs.

Course contents: - Operation of StuderDRESS integrated - Subroutine import and creation in StuderWIN, DXF import and wheel shape Working out of examples.

Note StuderDRESS integrated can only be used to re-profile a grinding wheel. Creating and defining the grinding wheel shape is done with StuderWIN. No free profiles can be created; they must previously be made with StuderWIN and its contour editor.




Course duration: - ½ day - Ideally, this course follows the StuderWin course "External grinding" (order no. A9904357).



23/42


“StuderCONTOUR”


Target group: - Operators and programmers of Studer CNC cylindrical grinding machines with Fanuc control system


grinding machines.

Objective: - Participants acquire solid basic knowledge in operating "StuderCONTOUR." At the end of the course, they

are able to autonomously create a workpiece contour program.

Course contents: - Operation of "StuderCONTOUR" - Macros for prefabricated part geometries - Contour editor - Geo-import - Working out of examples.

Note If the required contours cannot be made via macros or contour editor, they must be drawn using a CAD system (e.g. Vector) and imported as a DXF file.







24/42


"StuderCONTOUR integrated"



StuderWIN interface



Objective: - Participants acquire solid basic knowledge in operating "StuderCONTOUR integrated." At the end of the

course, they are able to autonomously create a workpiece contour program.

Course contents: - Operation of "StuderCONTOUR" - Macros for prefabricated part geometries - Contour editor - Geo-import - Working out of examples.

Note If the required contours cannot be made via macros or contour editor, they must be drawn using a CAD system (e.g. Vector) and imported as a DXF file.







25/42


"StuderTHREAD integrated" (machines without A-axis)



StuderWIN interface



Objective: - Participants acquire solid basic knowledge in operating "StuderTHREAD integrated." - They are able to use grinding programs on the machine for axially parallel thread grinding.

Course contents: - Programming system for axially parallel thread grinding - Operation of "StuderTHREAD integrated" - Practical exercises on the machine.




Course duration: - 1 ½ days - "CAD program Vector" can serve as a supplement if free thread molding is necessary (order no. 60008138).



26/42


"StuderTHREAD integrated" (machines with A-axis)



StuderWIN interface



Objective: - Participants acquire solid basic knowledge in operating "StuderTHREAD integrated." - They are able to use grinding programs on the machine to grind threads with A-axis.

Course contents: - Programming system for thread grinding - Operation of "StuderTHREAD integrated" - Topic: "correct installation of the grinding wheel on the A-axis" - Profiling single-tooth threaded washers - Practical exercises on the machine.




Course duration: - 2 days. - "CAD program Vector" can serve as a supplement if free thread molding is necessary (order no. 60008138).



27/42


"StuderFORM integrated"



StuderWIN interface



Objective: - Participants acquire solid basic knowledge in operating "StuderFORM integrated." - They are able to use grinding programs on the machine for form grinding.

Course contents: - General operation of "StuderFORM integrated" - Technological use of "StuderFORM" - Practical exercises on the machine with standard forms and optionally with DXF import

Note If the required shapes cannot be made via standard forms, they must be drawn using a CAD system (e.g. Vector) and imported as a DXF file.




Course duration: - 2 days. - "CAD program Vector" can serve as a supplement (order no. 60008138).



28/42


"StuderFORMHSM integrated"



StuderWIN interface



Objective: - Participants acquire solid basic knowledge in operating "StuderFORMHSM integrated." - They are able to effectively use grinding programs on the machine for form grinding with high-speed machin-

ing.

Course contents: - Operation of "StuderFORMSHM integrated" - Creating grinding data - Practical exercises on the machine with standard forms and optionally with DXF import





Course duration: - 3 days. - "CAD program Vector" can serve as a supplement (order no. 60008138).



29/42


"StuderPUNCH integrated"



StuderWIN interface



Objective: - Participants are able to use the created standard forms on the machine. - Punch grinding with "StuderPunch"

Course contents: - Operation of "StuderPunch" - Creating and defining the process data (production tasks) - Practical exercise on the machine with standard forms and optionally with DXF import





Course duration: - 2 days - "CAD program Vector" can serve as a supplement (order no. 60008138).



30/42


"CAD program Vector"


Target group: - Users of StuderForm, StuderFORMHSM, StuderPunch, StuderDRESS 2.x,

StuderCONTOUR and StuderTHREAD

Prerequisite: - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire solid basic knowledge in operating the CAD program Vector. At the end of the course,

they are able to create non-round shapes as well as workpiece or grinding wheel contours that cannot be made via standard forms and contour editor.

Course contents: - Operation of the "CAD program Vector" - Creating non-round shapes for form grinding in DXF format - Creating workpiece and grinding wheel contours in DXF format - Dimensions in drawings




Course duration: - 1 day

Services: - 1 lunch


31/42

Individual instruction and consulting at the customer's site in Europe

Order number: A9904291 For all customer machine types

Target group: - Customers who need instruction or consulting at their site

Objective: - The objectives for the particular instruction or consulting are predefined in the tender. - Those objectives serve as the benchmark for the training to be carried out.

Course contents: Instruction, consulting and retraining for: - programming - operation - general maintenance - grinding technology



Course place: - At the site of the customer.

Course duration: - The course duration will be defined by the customer in consultation with the instructor.

Services: - Course documentation if available

Price: according to price list, per 8-hour course day, plus travel, accommodation and food costs

32/42

Individual instruction and consulting, 2 days at Fritz Studer AG, Thun, Switzerland

Order number 60017812

Target group: - Customers who want instruction or consulting at Studer AG, in Thun, Switzerland.

Objective: - The objectives for the particular instruction or consulting are predefined in the tender. - The course contents have to be agreed with the instructor beforehand. - Those objectives serve as the benchmark for the training to be carried out.

Course contents: Instruction, consulting or retraining for: - programming - operation - general maintenance - grinding technology





Services: - Course documentation if available - 2 lunch


33/42

Individual instruction and consulting, 3 days at Fritz Studer AG, Thun, Switzerland

Order number 60017813

Target group: - Customers who want instruction or consulting at Studer AG, in Thun, Switzerland.

Objective: - The objectives for the particular instruction or consulting are predefined in the tender. - The course contents have to be agreed with the instructor beforehand. - Those objectives serve as the benchmark for the training to be carried out.

Course contents: Instruction, consulting or retraining for: - programming - operation - general maintenance - grinding technology

Note Also use this course for general maintenance of the machine mechanical and electrical systems “S11” and “favorit cnc”





Services: - Course documentation if available - 3 lunch


34/42

Ba

sic

co

urs

e S

tud

erS

IM

CAD program

"Vector"

Path contour grinding

Thread Grinding

StuderFORM to StuderSIM

Radius/taper grinding

Sphere grinding

Sp

ecia

l co

urs

es

at Studer Biel

Retraining at the customer's site

Training of sales staff

Training of own staff

35/42


Operation and programming StuderSIM basic course

60016639 4 ½ days

Operation and programming StuderSIM CAD program "Vector"

60016645 1 day.

Operation and programming StuderSIM path contour grinding

60016640 1 day.

Operation and programming StuderSIM thread grinding

60016641 3 days.

Operation and programming StuderSIM Stu-derFORM to StuderSIM

60016642 2 days.

Operation and programming StuderSIM ra-dius/taper grinding

60016643 2 days.

Operation and programming StuderSIM sphere grinding

60016644 2 ½ days

36/42

Operation and programming StuderSIM Basic course

Order number: 60016639 Target group:

- Operators and programmers of Studer CNC cylindrical grinding machines with StuderSIM user interface

Basic requirements

- Every participant must already have knowledge of cylindrical grinding and NC-programming. - Knowledge of ISO code programming would be advantageous. - Knowledge of how to use a PC with a Windows interface

Objective: - Participants acquire solid basic knowledge of the controls with user interface StuderSIM (focus on inter-

nal grinding)

Course contents:

- Controls and control system. - Basic user interface structure - Drawing the geometry of workpieces, grinding wheels and the machine - Tool management - Programming of dressing and grinding programs - Mechanical handling - Setting up grinding wheels and dressers - Use of TouchControl for StuderSIM (automatic correction, regrinding) - Practical exercise on the machine - Corrections:

Languages:

- German - French - Italian - English

Number of participants:

- From 2 up to a max. of 4 persons.

Course place:

- Fritz Studer AG, Skills Center for Internal Grinding, Lengnaustrasse 12, 2504 Biel, Switzerland

Course duration:

- 4 ½ days (Monday morning to Friday afternoon)

Services:

- Course documentation - 4 lunch

Price:

- According to price list, per person, without travel and accommodation costs

37/42

Operation and programming StuderSIM CAD program Vector



Basic requirements

- Knowledge of how to use a PC with a Windows interface Objective:

- Basic knowledge of the CAD program Vector - Creation of workpiece and grinding wheel contours

Course contents:

- Operating the Vector CAD program - Creating workpiece and grinding wheel contours - Creating dressing contours

- Exporting DXF data for further use in machine control Languages:




Course place:


Course duration:

- 1 day.

Services:


Price:


38/42

Operation and programming StuderSIM Path contour grinding



Basic requirements

- Knowledge of how to use a PC with a Windows interface - Every participant must already have operating and programming knowledge of Studer CNC cylindrical

grinding machines - Knowledge of StuderSIM user interface (see "Basic course") - Knowledge of "Vector" CAD program if this is to be used for creating the geometry data (see "Vector

CAD program" course)

Objective: - Ability to grind path contours

Course contents:

- Preparations for path contour grinding (workpiece sketch, data import) - Programming and simulation of path contour grinding cycle (G89) - Simulating the programmed cycle - Grinding-related information for path contour grinding - Practical exercise on the machine - Interpreting the results and making corrections

Languages: - German - French - Italian - English



Course place:


Course duration:

- 1 day.

Services:


Price:


39/42

Operation and programming StuderSIM Thread Grinding



Basic requirements - Knowledge of how to use a PC with a Windows interface - Every participant must already have operating and programming knowledge of Studer CNC cylindrical



Objective: - Ability to dress the grinding wheel profile

- Ability to find starting points of rough-turned threads - Ability to grind threads

Course contents: - Preparations for thread grinding (workpiece sketch, data import) - Creating a dressing cycle with imported data - Shape dressing a grinding wheel - Programming a thread grinding cycle (G88)

Writing a program for thread grinding - Setting up and programming the thread run-in positioning cycle - Grinding-related information on thread grinding

- Practical exercise on the machine - Interpreting the results and making corrections

Languages:




Course place:


Course duration:

- 3 days.

Services:


Price:


40/42

Operation and programming StuderSIM StuderForm to StuderSIM



Basic requirements




Objective:

- Ability to create grinding programs with StuderFORM - Using the grinding programs created on the machine

Course contents:

- Operating "StuderForm integrated" with standard shapes - Operating "StuderForm integrated" with import of DXF files from a CAD system - Creating an out-of-round subroutine with StuderFORM - Grinding-related information on out-of-round grinding

Simulating the program - Practical exercise on the machine - Interpreting the results and making corrections

Languages: - German - French - Italian - English



Course place:


Course duration:

- 2 days

Services:


Price:


41/42

Operation and programming StuderSIM Radius/taper grinding



Basic requirements - Knowledge of how to use a PC with a Windows interface - Every participant must already have operating and programming knowledge of Studer CNC cylindrical



Objective:

- Ability to grind radii and tapers with the B5-axis

Course contents:

- General information on grinding with interpolating B-axis - Programming and simulating grinding cycles for radii (G71) and tapers (G72). - Setting up and measuring the workpiece length (Z-B distance) - Grinding-related information on radius/taper grinding. - Practical exercise on the machine - Interpreting the results and making corrections

Languages:




Course place:


Course duration:

- 2 days.

Services:


Price:


42/42

Operation and programming StuderSIM Sphere grinding



Basic requirements




Objective:

- Ability to grind balls and spheres with cup wheels

Course contents:

- General information on ball/sphere grinding with cup wheel - Programming and simulating the ball/sphere grinding cycle (G83) - Simulating the programmed cycles - Setting up and measuring the workpiece length (Z-B distance) - Setting up the G83 cycle - Frequent problems and solution for ball/sphere grinding - Practical exercise on the machine - Interpreting the results and making corrections

Languages:




Course place:


Course duration:

- 2 ½ days

Services:


Price:


Date post:	20-Aug-2018
Category:	Documents
Upload:	trankien
View:	249 times
Download:	1 times

1.1.1 2018 edition - Studer · Training opportunities Fritz Studer AG Steffisburg ... Basic course...

Documents