-
SDG MODEL 12070 30GB/S PROGRAMMABLE PATTERN GENERATOR
PRODUCT SPECIFICATION
PICOSECOND PULSE LABS, P.O. BOX 44, BOULDER, CO 80306, USA, TEL:
1.303.443.1249, FAX: 1.303.447.2236 WWW.PICOSECOND.COM
REVISION 1.0, NOVEMBER 2011 PAGE 1 OF 4
Features: • Available with 1, 2, or 4 output channels
(independent data on all channels) • Built-in adjustable
precision clock source • Programmable output amplitude, offset,
and crossing point • PRBS and user defined patterns • Adjustable
channel phase delay • Option for built-in jitter insertion • Front
panel touch screen GUI or USB
computer control
Output Performance: • Low inherent jitter • 25ps typical 10% to
90% rise/fall times • 250mV to 2.0V output amplitude • -2.0V to
3.0V offset window • 35% to 65% programmable crossing point
Applications: • 25Gb/s testing for 100G Ethernet • 28Gb/s DQPSK
testing • Semiconductor device testing
PatternPro® Line of Serial Data Test Instruments
Model 12070-2 Two Channel PPG
Model 12070-4 Four Channel PPG
DC coupled output with consistent performance across all
amplitude, offset, and data conditions. Independently programmable
output channels allow comprehensive multi-lane testing.
Accurate eye output at high data rates.
Four channel independent output data at 25Gb/s.
-
SDG MODEL 12070 30GB/S PROGRAMMABLE PATTERN GENERATOR
PRODUCT SPECIFICATION
PICOSECOND PULSE LABS, P.O. BOX 44, BOULDER, CO 80306, USA, TEL:
1.303.443.1249, FAX: 1.303.447.2236 WWW.PICOSECOND.COM
PAGE 2 OF 4 REVISION 1.0, NOVEMBER 2011
Specifications:
Description: Value/Details Notes Data Outputs:
Differential/complimentary output.
Amplitude Single ended Differential
250 mV to 2.0 V 500 mV to 4.0 V
Each positive and negative differential output is independently
programmable.
Offset window -2 V to +3 V Programmable/adjustable
Termination voltage -2 V to +3.3 V Programmable/adjustable
Crossing point adjust range 35% to 65% typ.
Programmable/adjustable
Risetime 20% to 80% 10% to 90%
17 ps typ. 25 ps typ.
Scope bandwidth can impact the measured signal risetime.
Data output jitter 1 ps RMS typ. Measured with 27-1 PRBS. Data
phase delay adjustment Range Resolution
100 ps (±50 ps)
100 fs
Phase adjustment range of a given channel output differential
pair.
Output impedance 50 Ω single ended 100 Ω differential
Other Outputs:
Trigger Swings from -500 mV to 0 V
DC coupled. May be programmed as pattern trigger or clock/n
(with n = multiples of 64).
Clock output Amplitude Jitter
600 mVpp typ.
-
SDG MODEL 12070 30GB/S PROGRAMMABLE PATTERN GENERATOR
PRODUCT SPECIFICATION
PICOSECOND PULSE LABS, P.O. BOX 44, BOULDER, CO 80306, USA, TEL:
1.303.443.1249, FAX: 1.303.447.2236 WWW.PICOSECOND.COM
PAGE 3 OF 4 REVISION 1.0, NOVEMBER 2011
Description: Value/Details Notes
Jitter Insertion Option: Independent jitter sources on each
channel.
Total modulation range 150 pspk-pk Peak to peak range from all
sources.
Built-in sine source Frequency range Amplitude range
5 kHz to 100 MHz
0 to 150 pspk-pk
Programmable from either front panel touch screen GUI or remote
control.
Built-in random noise source Amplitude range
0 to 12.5 ps RMS
Programmable from either front panel touch screen GUI or remote
control.
External modulation input Frequency range Amplitude range Max
input
DC to 100 MHz 0 to 150 pspk-pk
5 Vpk-pk
DC coupled. 3 dB bandwidths. 1 Vpk-pk input equals modulation of
150 pspk-pk.
Control Interfaces:
Front panel touch screen GUI Yes Edit all instrument
settings.
Computer programmable interface USB TMC Program all instrument
settings.
Jitter modulation sources may be from built-in sources (sine,
random) or an external input. External jitter modulation sources
may be used for BUJ and other waveforms.
Stressed eye with built-in random jitter insertion.
Stressed eye with built-in sinusoidal jitter insertion.
Data output has an adjustable skew/delay range of 100ps (channel
independent). The pattern output may be bit shifted over a range of
±(230-1) (channel independent).
Data output skew settings of 0, -50, and +50ps.
Pattern bit shifts of 0, 6, and 15 bits.
-
SDG MODEL 12070 30GB/S PROGRAMMABLE PATTERN GENERATOR
PRODUCT SPECIFICATION
PICOSECOND PULSE LABS, P.O. BOX 44, BOULDER, CO 80306, USA, TEL:
1.303.443.1249, FAX: 1.303.447.2236 WWW.PICOSECOND.COM
PAGE 4 OF 4 REVISION 1.0, NOVEMBER 2011
Amplitude may be programmed between 250mV and 2V. Crossing Point
may be programmed from 35% to 65%.
1V and 500mV data outputs at 25Gb/s.
40% and 60% crossing point 25Gb/s data.
Data rate may be programmed via an internal low jitter clock
source. Output may be either built-in PRBS patterns or programmed
user data patterns.
5Gb/s and 25Gb/s programmed data rates.
Built-in PRBS and programmed user data.
Ordering Information Model 12070-1 30Gb/s Pattern Generator, 1
Channel Model 12070-1-J 30Gb/s Pattern Generator, 1 Channel, with
Built-in Jitter Insertion Option Model 12070-2 30Gb/s Pattern
Generator, 2 Channel Model 12070-2-J 30Gb/s Pattern Generator, 2
Channel, with Built-in Jitter Insertion Option Model 12070-4 30Gb/s
Pattern Generator, 4 Channel Model 12070-4-J 30Gb/s Pattern
Generator, 4 Channel, with Built-in Jitter Insertion Option
Contact Information Picosecond Pulse Labs P.O. Box 44 Boulder,
Colorado 80306, USA
Telephone: 303.209.8100 Fax: 303.447.2236 Email:
[email protected] Website: www.picosecond.com
