Woojoo Aerospace Ind.Co.,Ltd
Human Respect
Technology Development
Globalization
Company pro�leHistoryMessage from the CEOInsulation BlanketPrecision Machining AssemblyJig & FixturesMROAutomobil, Train & ShipBussiness Portfolio
03040506070809101212
Contents
Woojoo Aerospace Ind.Co.,Ltd
Capabilities
Company profile
Main business Insulation Blanket Fabrication (the sole company in Korea)
B-787 NWW Aircraft Parts Machining (Fitting, Bushing)
B-747 FTF Aircraft Parts Machining (Intercostal)
B-737 FSF Aircraft Parts Machining (Retainer)
B-777 WBE/FSF Aircraft Parts Machining (Splice)
EMB-170 Aircraft Parts Machining (Shim, Doubler)
A-340 WP-10A Aircraft Parts Machining
KT-1 Aircraft Parts Machining
T-50 Aircraft Parts Machining
KOMSAT Communication Satellite Parts and Jig Machining
1
Maintenance/Repare/OVHL
500MD HEL Duct/Follow Assy Manufacturing
US Forces UH-60 VIP Helicopter InternalMaterial Maintenance
F-4 Engine Parts (C/B, C/A) Over Haul
500MD CONTAINER Manufacturing
T-50 Aircraft COVER Manufacturing
2
Jig&Fxiture/Equipment
Aircraft Jig&Fxiture Manufacturing
Worktable and Equipment Manufacturing
Car/Train/Ship Parts and JIG Manufacturing
Micro Air Vehicle (MAV) Manufacturing(codeveloped with KAIST)
3
03
Woojoo Aerospace Ind.Co.,Ltd
History
06. 10 Established the company (Registration # 184611-0007943)
10. 16 Registered as a supplier of Koreanair Co., Ltd. Aerospace Division(LEVEL3)
10. 22 Acquired the approval of small & medium enterprise commencement
promotion execution plan (by Small Business Corporation)
11. 10 Selected as a military special service company (by Military Manpower Administration)
09. 28 Selected as a promising small & medium enterprise(by Korea Credit Guarantee Fund)
03. 31 Purchased CATIA
09. 13 Purchased the new factory (Site 3,800㎡; building site 2,000㎡)
12. 01 Capital increase 100 million won; Shinbo Investment Corporation Co., Ltd.
10. 21 Entered the repair contract with Koreanair Co., Ltd.
08. 07 Commenced manufacturing MD-95 parts with Koreanair Co., Ltd.
01. 31 Increased the capital (without compensation: 500 million won) total capital: 1 million USD
07. 25 Entered the production contract of B737-FSF, B777-FSF and ERJ work parts of Koreanair Co., Ltd.
12. 18 Embarked on manufacturing the parts of Korean Air multi-purpose satellite
01. 30 Signed a NDA with Bombardier
08. 10 Acquired the ISO14001 eco-friendly management system certi� cate
01. 18 Acquired the AS9100/ISO9001 Rev.B:2004 certi� cate
02. 26 Signed a NDA with BE aerospace
12. 22 Embarked on maintaining and remodelling Korean Air UH-60 VIP KIT
05. 13 Contracted with the Defense Acquisition Program Administration for maintenance of F-4 C/B&C/A
(Contract number: 2009-3110608)
09. 09 Manufactured 500 MD containers and supplied them to the Defense Acquisition Program
adminstration(2013NC14730)
07. 12 Contracted with Korean Air for supplying B-787 parts (BPA)
05. 16 Signed a NDA with Latecoere
02. 28 Purchased 3 sets of 5-axis MCT-DMC60T
1992
19931995
19961997
2000200220062007
2008
2009
2010
201320162017
1992 ~
2000 ~
04
Message from the CEO
The young persons who long for the space, love the sky and are willing to spread the dream without limitation gathered and made this company, which tries to be the fertilizer for the development of Korean aircraft industry.
Although it is not the leader of aircraft industry, it has does its best to be the root for 25 years to harden the foundation.
This company was established by the administrator who has years of experiences while partsicipating in the aircraft manufacturing industry at Koreanair Co., Ltd. as the enterprise commencement members and built the advanced facilities with the acquisition of business commencement approval by Small Business Corporation.
It was selected as a promising small & medium enterprise by Korea Credit Guarantee Fund; a promising advanced technology enterprise by Ministry of Ministry of Commerce, Industry and Energy; a technical development model firm by IBK Bank. It is the venture firm which the Credit Assurance Business Commencement Investment participated in with the capital.
It was supported for the technical development innovative fund by Small & Medium Business Administration to complete developing the military target drone and MAV developement to produce the prototype.
It took parts in the industry-school-research consortium and developed the suspension band for Helicopter. The relevant patents are registered.
In addition, it was requested to develop the aircraft interior insulation blankets from Korean air Co., Ltd. and completed the development for the � rst time in Korea.
From design to manufacturing, it equips the lump production system for best quality, timely delivery and lowest price realization and will respond customers' expectation.
Thank you for your continued support and encouragement.
Sincerely,KJ KIM
CEO Kim, Ki Joo
05
Woojoo Aerospace Ind.Co.,Ltd
Certifications & Awards
Business Licenses
Patent
Acceptance of Report for Manufacturing Aircraft
Machinery and Material
Factory License
AS9100 Certi� cate
Appointment Letter for Tech Development
Model Company
Clean Workplace Certi� cate
Military Supply Safety Test Certi� cate
Approval for Action Plan to start a small and medium-sized
business
Venture Business Con� rmation
Trade Registration Certi� cate
Appointment Letter for a Promising Small
and Medium-sized Business
Company Profile
06
Woojoo Aerospace Ind.Co.,Ltd
Insulation Blankets Aircraft
It is an insulation material installed between the exterior and internal wall surrounding the entire interior of the aircraft. It is one of the most used components of an aircraft and plays several roles such as insulation, soundproofing, moisture removal, incubation, communication equipment protection, etc.
Insulation BlanketBusiness area 01
Vinyl Cover - Sawing
Vinyl Cover - Heat sealing
Fabric Cover - Sawing
Vinyl Cover - Sawing
Vinyl Cover - Heat sealing
Fabric Cover - Sawing
Vinyl Cover - Sawing
Vinyl Cover - Heat sealing
Fabric Cover - Sawing
07
EMB-170 � tting
B-777 End Cap
Steady and stable orders B-737 FSF parts machiningB-777 WBE / FSF parts machining
B-747 FTF parts machiningA-340 parts machiningEMB-170 parts machining
Precision Machining Business area 02
B-737 Backing Plate(LH) Retainer(RH) B-737 Preload Pad
B-777-Splice � tting
B-787-Ti � tting
08
Woojoo Aerospace Ind.Co.,Ltd
MAV
Rod-End
1st Ready-To-Fly Aircraft Manufacturer as a Small-medium Sized Company
Ass’y & Manufacture
500MD and UH60 Helicopter Structure
MAV Co-developer
AssemblyBusiness area 03
Canopy FrameLower Panel
MAV
Eng Bay
09
Bacuume jig
NCMF
Milling Fixtures Manufacturing such as NCMF, MF, etc
Manufacturing Jigs for Hole Machining such as Drill Jig
Template Manufacturing such as SUT, LT, etc
Bonding Jig Manufacturing such as BJ
Tester Manufacturing
Jig & FixturesBusiness area 04
Bonding Jig
ADD TesterDrill Jig
NCMF
10
Woojoo Aerospace Ind.Co.,Ltd
Manufactured 500MD Helicopter Container, Duct, Follower assy and supplied them to the military
Manufactured T-50 aircraft cover and supplied it to the ROK air forces
modificationed Lynx Helicopter Harpoon head and supplied it to the ROK navy
Repaired F-4 phatom CSD Cable Assy & cylinder Block head and supplied to the ROK air forces
Manufactured UH-60 Helicopter VIP Kit Seat & interior panel and supplied it to the US forces
Patented Lynx Helicopter Suspension Band and supplied to the ROK navy
MROBusiness area 05
Harpoon Head
CSD Cable Special Tool
Suspension Band-LYNX
UH60 Seats 500MD Container
11
Business area 06 Equipment
5 axis MCT-DMC 60T 1 5 axis MCT-DMC 60T 2 5 axis MCT-DMC 60T 3
Conventional Mill M/C CNC Mill M/C Sur� ce Grinding M/C
12
Woojoo Aerospace Ind.Co.,Ltd
NC Lathe
3D Lay-out M/C
3 axis high - speed MCT - VF2 3 axis MCT - Horizontal type
Welding M/C Optical tool Stand
13
Jig For Car, Train, and Shipbuilding
They are processed, welded, and assembled with great precision by the automation
line and jigs used in making and assembling the components of cars, trains, ships.
Automobil, Train & ShipBusiness area 06
Guide Rail
Train parts
Over Bridge
Train parts
Over Bridge2
Rolling Stock
Ship
Train
Car
Car Jig 1 Car Jig 2 Car Jig 3
14
Bussiness Portfolio
Aircraft Assembly &
Manufacture
InsulationBlanket
Precision Machining
MRO
KT-1 B737 KUH
Vinyl Cover - Sawing Vinyl Cover - Sawing Vinyl Cover - Sawing
Cutting Milling Turning
500MD Container UH60 Seats CSD Cable
B777 MUAV Smart Drone
Vinyl Cover - Heat sealing Vinyl Cover - Heat sealing Vinyl Cover - Heat sealing
fabric Cover - Sawing fabric Cover - Sawing fabric Cover - Sawing
15
Woojoo Aerospace Ind.Co.,Ltd
SEOUL
Gimhae
South Korea Head Quarter & Factory
25, Gimhae-daero 1031beon-gil, Hallim-myeon, Gimhae-city, Gyeongsangnam-do, Republic of Korea 52580TEL. +82-55-345-8866 FAX. +82-55-345-8864 CELL. +82-10-3574-8866e-mail. [email protected]://www.wai.co.kr
Contact Us
Woojoo Aerospace Ind,Co,.Ltd