+ All Categories
Home > Documents > 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card...

12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card...

Date post: 20-Mar-2021
Category:
Upload: others
View: 2 times
Download: 0 times
Share this document with a friend
7
ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut out each piece along solid lines, including wing slots on the engines. 3. Carefully score along dashed lines except inner wing tabs. 4. Glue and assemble hull, cockpit, and engines. 5. Carefully center and glue top and bottom braces to hull. 6. Glue cockpit to top of hull. 7. Insert engines between braces so they fit against hull, and glue where indicated. 8. Glue and fold wings together. Place glue on back of wing tabs, and insert wing extensions into engine slots. 9. Glue and assemble ARC-170 base. 10. Place ARC-170 on base for display. STAR WARS™ and © 2012 Lucasfilm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.
Transcript
Page 1: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

ARC-170

ARC-170 Instructions1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box.

2. Cut out each piece along solid lines, including wing slots on the engines.

3. Carefully score along dashed lines except inner wing tabs.

4. Glue and assemble hull, cockpit, and engines.

5. Carefully center and glue top and bottom braces to hull.

6. Glue cockpit to top of hull.

7. Insert engines between braces so they fit against hull, and glue where indicated.

8. Glue and fold wings together. Place glue on back of wing tabs, and insert wing extensions into engine slots.

9. Glue and assemble ARC-170 base.

10. Place ARC-170 on base for display.

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

Page 2: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

HULL GLUEGLUEGLUE

GLU

E

GLUE UNDERNEATH AND ADHERE TO BOTTOM OF HULL

GLUE GLUE

GLU

EGLU

E

GLUE

GLUE

FOLD DOWN ALONG ALL DOTTED LINES

GLUE UNDERNEATH AND ADHERE TO BOTTOM OF HULL

Page 3: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

COCKPIT

GLUE UNDERNEATH BRACE AND ADHERE WHERE NOTED TO TOP OF

HULL AND ENGINES

BOTTOM ENGINE BRACE

TOP ENGINE BRACE

GLUE UNDERNEATH BRACE AND ADHERE WHERE NOTED TO BOTTOM OF

HULL AND ENGINES

FOLD DOWN ALONG ALL DOTTED LINES

GLUE UNDERNEATH AND ADHERE TO

BOTTOM OF COCKPIT

GLUE UNDERNEATH AND ADHERE TO

BOTTOM OF COCKPIT

GLU

E

GLUE

GLU

E TO

TO

P O

F H

ULL

GLUE

GLUEGLUE

Page 4: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

RIGHT ENGINE

FOLD DOWN ALONG ALL DOTTED LINES

FOLD DOWN ALONG ALL DOTTED LINES

GLUE UNDERNEATH AND ADHERE TO SIDE OF ENGINE

GLUE UNDERNEATH AND ADHERE TO SIDE OF ENGINE

GLUE UNDERNEATH AND ADHERE TO SIDE OF ENGINE

GLUE UNDERNEATH AND ADHERE TO SIDE OF ENGINE

LEFT ENGINE

3 WING SLOTS

3 WING SLOTS

3 WING SLOTS

3 WING SLOTS

GLUE

GLUE GLUE

GLUEGLUE

GLUE GLUE

GLUEGLUE

GLUE GLUE

GLUEGLUE

GLUE GLUE

GLUEGLUE

Page 5: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

FOLD DOWN ALONG CENTER DOTTED LINES AND GLUE TOGETHER

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

CENTER WING

FOLD UP ALONG ALL INNER WING TABS AFTER WINGS ARE GLUED TOGETHER

TOP LEFT WING

BOTTOM LEFT WING

Page 6: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

FOLD DOWN ALONG CENTER DOTTED LINES AND GLUE TOGETHER

CENTER WING

FOLD UP ALONG ALL INNER WING TABS AFTER WINGS ARE GLUED TOGETHER

TOP RIGHT WING

BOTTOM RIGHT WING

Page 7: 12761 B PC ARc170 r2t2 ng · 2018. 4. 10. · ARC-170 ARC-170 Instructions 1. Print out on card stock, or print on paper, and glue to thin cardboard, such as a cereal box. 2. Cut

STAR WARS™ and © 2012 Lucasfi lm Ltd. All rights reserved. Used under authorization. © 2012 Microsoft Corporation. All rights reserved. Reproduction permitted solely for personal and noncommercial use.

BASE

GLUE

GLU

EG

LUE

GLU

E

GLU

EG

LUE

GLU

E

FOLD DOWN ALONG ALL DOTTED LINES


Recommended