1604VLZ4
O W N E R ’ S M A N U A L
16-Channel 4-Bus Compact Mixer
2 1604VLZ4
160
4V
LZ
4 Important Safety Instructions1. Read these instructions. 2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.
16. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17. This apparatus has been designed with Class-I construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding prong).
18. This apparatus has been equipped with a rocker-style AC mains power switch. This switch is located on the rear panel and should remain readily accessible to the user.
19. The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device shall remain readily operable.
PORTABLE CARTWARNING
CAUTION AVISRISK OF ELECTRIC SHOCK. DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL
ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.
CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE
A LA PLUIE OU A L'HUMIDITE
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons.Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque d'éléctrocution.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé pour alerter les utilisateurs de la présence d'instructions importantes pour le fonctionnement et l'entretien (service) dans le livret d'instruction accompagnant l'appareil.
20. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandthe
receiver.• Connecttheequipmentintoanoutletonacircuitdifferentfrom
that to which the receiver is connected.• Consultthedealeroranexperiencedradio/TVtechnicianfor
help. CAUTION: Changes or modifications to this device not expressly
approved by LOUD Technologies Inc. could void the user's authority to operate the equipment under FCC rules.
21. This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
ATTENTION — Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.
22. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:
Duration, per day in hours
Sound Level dBA, Slow Response
Typical Example
8 90 Duo in small club6 924 95 Subway Train3 972 100 Veryloudclassicalmusic1.5 1021 105 Matt screaming at Troy about
deadlines0.5 1100.25 or less 115 Loudest parts at a rock concert
WARNING — To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
3Owner’s Manual
Ow
ne
r’s Man
ual
Part No. SW0972 Rev. A 06/13©2013 LOUD Technologies Inc. All Rights Reserved.
Contents25. CHANNEL FADER ..................................... 15 A CLEAN FADE ........................................ 1526. ASSIGN (1–2, 3–4, L–R) ........................ 1527. SOLO ..................................................... 1628. –20 (SOLO) LED ..................................... 1629. OL (MUTE) LED ....................................... 1630. MUTE .................................................... 1631. PAN....................................................... 17 STEREO SOURCES ................................... 17 CONSTANT LOUDNESS ! ! ! ...................... 1732. 3-BAND MID-SWEEP EQ ......................... 1733. LOW CUT .............................................. 1834. AUX 1, 2, 3, & 4 .................................... 1835. PRE ....................................................... 1836. 5/6 SHIFT ............................................. 18
OUTPUT SECTION DESCRIPTION ............................. 1937. MAIN MIX FADER ................................... 1938. SUBGROUP FADERS ............................... 1939. ASSIGN TO MAIN MIX ............................ 1940. TAPE IN (LEVEL) ..................................... 2041. TAPE TO MAIN MIX ................................ 2042. SOURCE ................................................ 2043. CR/PHONES .......................................... 2044. MODE (AFL/PFL) .................................... 2145. LEVEL SET LED ........................................ 2146. SOLO (LEVEL) ......................................... 2147. RUDE SOLO LIGHT .................................. 2148. METERS ................................................. 22 METERS VS. REALITY .............................. 22 AUX TALK .............................................. 2349. AUX SENDS (MASTER) ............................ 2350. AUX SENDS SOLO .................................. 2351. STEREO RETURNS (LEVEL) ....................... 2352. TO AUX 1 AND TO AUX 2 ....................... 2453. MAIN MIX TO SUBS (STEREO RET 3) ....... 2454. 1–2/3–4 (STEREO RETURN 3) ................ 2455. CR/PH ONLY (STEREO RETURN 4) .......... 2556. RETURNS SOLO AND LED ........................ 25
APPENDIX A: SERVICE INFORMATION .................... 26APPENDIX B: CONNECTIONS.................................. 26APPENDIX C: TECHNICAL INFORMATION ................ 30 DIMENSIONS .................................................. 31 TRACK SHEET.................................................. 32 BLOCK DIAGRAM ............................................ 341604VLZ4 LIMITED WARRANTY ............................ 35
IMPORTANT SAFETY INSTRUCTIONS ........................ 2CONTENTS .............................................................. 3FEATURES / INTRODUCTION ................................... 4GETTING STARTED ................................................... 5HOOKUP DIAGRAMS............................................... 6CONVERTING TO RACKMOUNT MODE ...................... 8PATCHBAY DESCRIPTION ......................................... 9
EZ INTERFACE .......................................... 91. MIC INS ................................................... 9 PHANTOM POWER .................................... 92. LINE INS ................................................ 103. GAIN .................................................... 104. INSERT .................................................. 105. DIRECT OUT ........................................... 10 SPLIT MONITORING ............................... 106. AUX SENDS ............................................ 11 EFFECTS: SERIAL OR PARALLEL? .............. 117. STEREO RETURNS ................................... 128. SUB OUTS ............................................. 12 DOUBLE BUSING .................................... 129. CR OUTS (CONTROL ROOM OUTPUTS) .... 1210. PHONES OUT (ON FRONT PANEL) ........... 1211. TAPE OUT .............................................. 1212. TAPE IN ................................................. 1313. MAIN INSERT ......................................... 1314. MAIN OUTS .......................................... 1315. MONO OUT............................................ 1316. MONO LEVEL ......................................... 1317. VOLTAGE SELECTOR ................................ 1318. POWER CONNECTION ............................. 1319. FUSE ...................................................... 1420. POWER SWITCH ..................................... 1421. POWER LED ........................................... 1422. PHANTOM SWITCH ................................ 1423. 48V LED ................................................ 1424. BNC LAMP SOCKET ................................. 14
CHANNEL STRIP DESCRIPTION ............................... 15 “U” LIKE UNITY GAIN ............................ 15
Please write your serial number here for future reference (i.e., insurance claims, tech support, return authorization, make dad proud, etc.) Purchased at: Date of purchase:
Like usFollow usWatch our dang videos
https://www.facebook.com/Mackiehttps://twitter.com/mackiegearhttp://www.youtube.com/user/mackietv
4 1604VLZ4
160
4V
LZ
4 Features • 16-channelmixerfeaturingoursignature
high-headroom,low-noisedesign
• 16boutique-qualityOnyxmicpreamps •Ultra-wide60dBgainrange •128.5dBdynamicrange •+22dBulineinputhandling •Extendedfrequencyresponse •Distortionunder0.0007%(20Hz-50kHz)
• ImprovedRFrejection,perfectforbroadcastapplications
• Phantompowerforcondensermics
• 16high-headroomlineinputswith +4/–10operationcontrol
• 16balancedinsertsperfectforintegratingoutboardgear
• 3-bandEQwithsweepablemidrange
• 18dB/oct75Hzlow-cutfilteronmicinputchannels
• Fourauxsends,level,panandsoloand overload/muteLEDsoneachchannel
• Fourstereoreturns,eightdirectouts andfourgroup/busoutputs
• 60mmlong-wearinglog-taperfaders
• Controlroom/phonesmulti-inputsource matrix
• High-resolution12-segmentstereometers
• Sealedrotarycontrolresistdustandgrime
• “Built-Like-A-Tank”ruggedsteelchassiswithpowder-coatfinish
• High-visibility,high-contrastcontrolsdeliverconvenient“at-a-glance”visualfeedback
• Rack-mountabledesignwiththreephysicalconfigurationsviaRotopodaccessory (soldseparately)
• Multi-voltagepowersupplyforworldwideuse
IntroductionAlegendincompactmixerdesign,the1604VLZ4
nowcombinestheprovenperformanceofOnyxpreampswiththeno-compromisehigh-headroom/low-noise designthatmadethe1604anindustrymainstay.
All16channelsfeatureanOnyxmicpre,line inputandinsertinacompact4-busdesignbuilt forapplicationflexibilityandprofessionalperformance.Plus,itistruly“Built-Like-A-Tank”witharidiculouslyruggedsolid-steelchasisthatincludeshigh-contrastcontrolsforultimatetactilecontrol.
Foundincountlessprofessionalbroadcastandpost facilitiesandeasilythemostprovenband-friendly analogmixerever,the1604standsaloneintheworld ofcompactmixing.
How To Use This Manual
Aftertheintroduction,agettingstartedguidewillhelpyougetthingssetupfast.Thesearefollowedbyhookupdiagramswhichshowsometypicalsetups.
Nextisadetailedtouroftheentiremixer. Thedescriptionsaredividedintosections,just asyourmixerisorganizedintodistinctzones:
• Patchbay
• ChannelStrip
• OutputSection
Throughoutthesesectionsyou’llfindillustrationswitheachfeaturenumberedanddescribedinnearbyparagraphs.
Thisiconmarksinformationthatiscriticallyimportantoruniquetothemixer.Foryourowngood,readthemandrememberthem.
Thisiconwillleadyoutosomeexplanations offeaturesandpracticaltips.Theyusuallyhavesomevaluablenuggetsofinformation.
Need help with your mixer?• Visit www.720trees.com and click Support to find: FAQs, manuals and other useful information.
• Email us at: [email protected].
• Telephone 1-800-898-3211 to speak with one of our splendid technical support chaps (Monday through Friday, normal business hours, Pacific Time).
5Owner’s Manual
Ow
ne
r’s Man
ual
Getting StartedWerealizethatyoumustbereallykeentotryout
themixer.Pleasereadthesafetyinstructionsonpage2,thenhavealookthroughsomeofthefeaturesanddetailsinthismanual.
Setup
Usethemixerinanicecleananddryenvironment,freefromdryerlintanddustbunnies.
Zero the controls
1. Fullyturndownalltheknobsandfaders tominimum,exceptforthechannelEQ andpancontrols,whichshouldbecentered.
2. Makesureallbuttonsareintheoutposition.
Connections
1. MakesuretheACpowerswitchisoffbeforemakinganyconnections.
WARNING:BeforepluggingtheACpowercordintothemixer,makesuretheVOLTAGESELECTORswitchissettothesamevoltageasthelocalACmainssupply(seepage13).
2. PushthelinecordsecurelyintotheIECconnectorontherearpanel,andplugitintoa3-prongACoutlet.ThemixermayacceptanyACvoltagerangingfrom100VACto240VAC.
3. PlugabalancedmicrophoneintooneofthemicXLR(3-pin)connectors.Orconnectany line-levelsignal(keyboard,orguitarpreamp)toalineinputjackusingaTSoraTRS 1/4"plug.
4. Ifyourmicrophonerequiresphantompower,turnonthe48Vphantompowerbutton.
5. All16channelshaveinsertjacksthatcanbeusedtoconnectanexternaleffectsordynamicsprocessorintothesignalchain.
6. ConnecttheTRS1/4"mainoutputsofthemixertothelinelevelinputsofyouramplifier(withspeakersalreadyattached)ortothelinelevelinputsofpoweredspeakers.
Set the levels
It’snotevennecessarytohearwhatyou’redoingtosetoptimallevels.Butifyou’dliketo:Plugheadphonesintothephonesoutputjack,thenturnupthe CR/phonesknobjustalittle.
1. Turnonthemixerbypressingthetopedgeofthepowerswitch.
2. Foronechannel,pressthesoloswitchin.
3. Engagethemodeswitchinthemaster section.Agreenlevelsetlightwillturnon.
4. Playsomethingintothatinputatreal-worldlevels.
5. Adjustthatchannel'sgaincontroluntiltheleftmainmeterstaysaroundthe0dBLED(marked“levelset”)andnevergoeshigherthan“+7.”
6. Disengagethechannel'ssoloswitch.
7. Repeatsteps2to6fortheremainingchannels.
8. Turnupthechannelfadertothe“U”mark.
9. Slowlyturnupthemainmixfaderuntilyouhearthesignalsintheheadphones.
10.Ifneeded,applysomechannelEQwisely.
11.Adjustthechannelfaderstogetthebestmix.Keepthegaincontrolsandlevelsfullydown onunusedchannels.
12.Duringtheperformance,ifyounoticeachannelOLLEDturningonduringpeaks,carefullyturndownthatchannel'sgaincontroluntilOLdoesnotturnon.
Things to Remember
• Neverlistentoloudmusicforprolonged periods.PleaseseetheSafetyInstructionsonpage2forinformationonhearingprotection.
• Alwaysturndownthemainmixfaderandcontrolroom/phonesknobdownwhenmakingconnectionstothemixer.Betteryet,turnoffthepower.
• Whenshuttingdown,turnoffanypoweramplifiersorpoweredspeakersfirst.Whenpoweringup,turnthemonlast.Thiswill reducethechanceofturn-onorturn-offthumps.
• Savetheshippingbox!
6 1604VLZ4
160
4V
LZ
4
Hookup Diagrams
Recording System
Drum microphonesVocalmics
Headphone amp(Connected to thephones jack on the front of the mixer)
Stereo Compressorand Stereo EQ
Stereo Tape Deck
Vocalmics
MR8mk3studio monitors
Headphones
Stereo Guitar Effects
Stereo Guitar Effects
Synth
Stereo Compressor
Stereo Compressor
Digital Reverb
Digital Delay
Multi-trackDigital Recorder
Laptop
The rhythm and lead guitars play through stereo effects processors plugged into the line inputs of channels 1 and 2. Microphones are connected to the mic inputs of channels 3-14 with vocal compressors connected to the channel 3-4 and 13-14 insert jacks. [Drums are mic'd on channels 5-12]. A bass guitar is connected to the line input of channel 15, while a synth is connected to the line input of channel 16.
A stereo compressor and stereo graphic EQ are connected to the L/R main inserts. Digital reverb and delay processors are connected to aux sends 1 and 3, with the aux sends set to post-level. Effects are added to the main mix via the stereo return inputs, and adjusted with the stereo return level control.
There are a multitude of recording possibilities geared for both analog purists and digital hounds. There are three examples listed here, but feel free to experiment! (1) the RCA tape inputs and outputs are connected to a stereo tape deck. It's an easy way to get a stereo recording of the entire band, as well as listening to playback (over tape), (2) the eight direct outputs are connected to the eight inputs of a multi-track digital recorder, and (3) the four subgroup outs are connected to the laptop. Again, there are many choices for recording. Do what works for you and your setup!
A pair of MR8mk3 studio monitors are connected to the control room outputs to listen to playback of your latest masterpiece.
7Owner’s Manual
Ow
ne
r’s Man
ual
Live Stereo PA System
Drum microphonesVocalmics
Headphones(Connected to thephones jack on the front of the mixer)
Stereo Compresorand Stereo EQ
Vocalmics
Stereo Guitar Effects
Stereo Guitar Effects
Synth
Stereo Compressor
Stereo Compressor
Digital Reverb
Digital Delay
Laptop
DLM8 Stage Monitors
DLM12S subwoofersStereo EQ
DLM8 loudspeakers
The rhythm and lead guitars play through stereo effects processors plugged into the line inputs of channels 1 and 2. Microphones are connected to the mic inputs of channels 3-14 with vocal compressors connected to the channel 3-4 and 13-14 insert jacks. [Drums are mic'd on channels 5-12]. A bass guitar is connected to the line input of channel 15, while a synth is connected to the line input of channel 16.
A stereo compressor and stereo graphic EQ are connected to the L/R main inserts. The 1/4" L/R main outs connect to a stereo graphic EQ before connecting to a pair of DLM12S powered subwoofers which are connected to a pair of DLM8 powered loudspeakers to please your audience.
Aux sends 1 and 2 are connected to DLM8 powered loudspeakers, used as stage monitors to please the band. Digital reverb and delay processors are connected to aux sends 3 and 4, with the aux sends set to post-level. Effects are added to the main mix via the stereo return inputs, and adjusted with the stereo return level control.
The RCA tape inputs and outputs are connected to a laptop. It's an easy way to get a stereo recording of the live show for posterity and crank your featured playlist over the PA between bands.
8 1604VLZ4
160
4V
LZ
4 Converting To Rackmount ModeNotonlyisthe1604VLZ4acompact,professional-
qualitytabletopmixer...it’srack-mountable! Theuniquerotatinginputpodmakesthispossible.
Withatrustyphillipsscrewdriver,nervesofsteel,grit,determination,charminggoodlooksandafewmomentsofyourvaluabletime,itmaybeconvertedfromdesktopmode(fromthefactory)torackmountmode:
1. TurnoffthepowerandremoveALLthecordsfromthemixer—powercord,audio,lamps,everything.
2. Placethemixer,facedown,onacleansoftsurface,likeablanketorverylargedog.
3. Removethefourscrewssecuringthecablecover[a]andsettheplateaside.
4. Replacetwoofthescrews;theonesatthepodendofthemixer[b].
5. Removetwopod-mountingscrewsoneachsideofthemixer[c].
6. Gentlypullthepodawayfromtheslots,rotateit,andplaceit,tabsfirst,intotherackmounttabs[d],locatedontheundersideofthemainchassis.Becarefulnottoconstrictorpinchanyoftheribbonorpowercables.
removescrews
rackmounttab slots
removeplate
replacescrews
removescrews
flush mount
rotatepod replace
screws
use the longer screws that come in a little bag
sunkenposition
use the longer screws that come in a little bag
7. Carefullyinstallthepod-mountingscrewsintheirnewlocations[d].
8. Installtherackearsthatcamewiththemixer,usingthesuppliedpacketofscrews.Thesescrewsareabitlongerthantheonesyouhavetotakeout.Therackearsmaybeinstalledineitheroftwodepthsasshownatthebottomofthispage:[e]mixer’ssurfaceflushwiththerackrails,likeordinaryrackmountequipment,or[f]mixer’ssurfacesunkenintotherack,toprotecttheknobsfrombeingbumped.
NOTE:Ifyouremovetherackearsatalaterdate,usetheoriginal(shorter)screwstosecurethesides.
AnoptionalaccessorycalledtheRotopod-VLZis availableandmaybeusedindesktoporrackmountinstallations.Itwillputthepatchbayjacksonthe sameplaneasalltheknobs,buttonsandfaders. Thisisalifesaverinapplicationsthatdemandfrequentrepatching,andcostsaheckofalotlessthanan externalpatchbay,nottomentionalltheinterface andpatchcords.Pleasevisityourdealerformore excitingdetails.Besuretoorderthe“VLZ4”version soyoudon’tendupwiththeonefortheclassicCR-1604!
9Owner’s Manual
Ow
ne
r’s Man
ual
Patchbay Description
1
Attheriskofstatingtheobvious,thisiswhereyouplugeverythingin:microphones,line-levelinstrumentsandeffects,headphones,andtheultimatedestinationforyoursound:PAsystem,DAW,etc.Afewofthe featuresdescribedinthissectionareontopofthemixer,butmostareoutbackonthis“pod.”
SeeAppendixB(page27)forfurtherdetailsandsomeratherlovelydrawingsoftheconnectorsyou canusewiththe1604VLZ4.
EZ InterfaceConcernedaboutlevels,balancing,impedances, polarity,orotherinterfacegoblins?Youcanpatch anythingalmostanywhereonthe1604VLZ4,with naryacare.Here’swhy:
• Everyinputandoutputisbalanced(exceptinsert,phonesandRCAjacks).
• Everyinputandoutputwillalsoaccept unbalancedlines(exceptXLRjackswhenphantompowerison).
• Everyinputisdesignedtoacceptvirtuallyanyoutputimpedance.
• Themainleftandrightmixoutputscandeliver28dBuintoaslowasa600ohmload.
• Alltheotheroutputscandeliver22dBuinto aslowasa600ohmload.
• Alltheoutputsareinphasewiththeinputs.
Allweaskisthatyouperformthelevelsetting procedure[page5]everytimeyoupatchinanew soundsource.Sostopworryingandstartmixing!
1. Mic InsThisisafemaleXLRconnectorthatacceptsa
balancedmicorlinelevelinputfromalmostanytype ofsource.TheseOnyxmicpreampsfeaturehigher fidelityandheadroomrivalinganystandalonemic preamponthemarkettoday.Thesecircuitsareexcellentatrejectinghumandnoise.
TheXLRinputsarewiredasfollows: Pin1=Shieldorground Pin2=Positive(+orhot) Pin3=Negative(–orcold)
Professionalribbon,dynamic,andcondensermicsallsoundexcellentthroughtheseinputs.Themic/lineinputswillhandleanykindoflevelyoucantossatthem,withoutoverloading.
Noteveryinstrumentismadetoconnectdirectlyto amixer.GuitarscommonlyneedaDirectInjection(DI)boxtoconnecttothemixer'smicinputs.Theseboxesconvertunbalancedline-levelsignalsfromyourguitar,intobalancedmic-leveloutputs,andprovidesignalandimpedancematching.Theyalsoletyousendyourgiftedguitarrenditionsoverlongcablesoraudiosnakes, withminimuminterferenceorhigh-frequencysignalloss.Askyourdealerorguitarmakerabouttheir recommendationsforagoodDIbox.
Phantom PowerMostmodernprofessionalcondensermicsare
equippedforphantompower,whichletsthemixersendlow-currentDCvoltagetothemic’selectronicsthroughthesamewiresthatcarryaudio.(Semi-procondensermicsoftenhavebatteriestoaccomplishthesamething.)“Phantom”owesitsnametoanabilitytobe“unseen”bydynamicmics(ShureSM57/SM58,forinstance),whichdon’tneedexternalpowerandaren’taffectedbyitanyway.
The1604VLZ4’sphantompowerisgloballycontrolledbythephantom[22]switchontherearpanel. (Thismeansthephantompowerforallchannels isturnedonandofftogether.)
Neverplugsingle-ended(unbalanced)microphones,orribbonmicsintothemicinputjacksifthephantompowerison.
Donotpluginstrumentoutputsintothe micinputjackswithphantompoweronunlessyouknowforcertainitissafetodoso.
10 1604VLZ4
160
4V
LZ
4
4. InsertTheseunbalanced1/4"jacksareforconnectingserial
effectsprocessorssuchascompressors,equalizers, de-essers,orfilters.Theinsertpointisafterthegain[3]control,butbeforethechannel’sEQ[32],lowcut[33],fader[25]andmute[30]controls.Insertcablesmustbewiredthusly:
Tip=send(outputtoeffectsdevice) Ring = return(inputfromeffectsdevice) Sleeve = commonground
Eventhoughchannels1–8alreadyhavedirectout[5]jacks,insertjackscanalsobeusedaschanneldirectoutputs;post-gain,pre-lowcut,andpre-EQ.Seetheconnectorsectiononpage29showingthreewaystouseinsertcables.
5. Direct OutFoundonlyonchannels1–8,thesebalanced1/4"
jacksdeliverthesignalfromtheveryendofthechannelpath;post-gain[3],post-EQ[32],post-lowcut[33],post-fader[25],andpost-mute[30].Theyarethekeyplayerin“splitmonitoring,”makingthe1604VLZ4 perfectforan8-trackstudio.
Split MonitoringWithsplitmonitoring,youusethefirsteightchannelsforyoursoundsources:vocalmics,drummics,keyboard/synthoutputs,guitar
effectsoutputs,thatsortofthing.Fromthere,thechannelsmanipulatethesound,butarenotassignedtotheoutputsection.Instead,they’repatchedfromthechannel’sdirectout[5]jackstothecorrespondingmultitrackinput(directout1tomultitrackinput1,2to2,3to3,etc.).Thesignalswillnowberecordedorpassdirectlythroughthemultitrack,dependingoneachtrack’srecord-readystatus.
tip
This plug connects to one of the mixer’s Channel Insert jacks. ring
tipring
sleeve
SEND to processor
RETURN from processor
(TRS plug)
multitrackmachine
sound sources
directoutputs
groupoutputs
1–8 9–16
2. Line InsThese1/4"jackssharecircuitry(butnotphantom
power)withthemicpreamps,andcanbedrivenby balancedorunbalancedsourcesatalmostanylevel. Youcanusetheseinputsforvirtuallyanysignalyou’llcomeacross,frominstrumentlevelsaslowas–50dBu,tooperatinglevelsof–10dBVto+4dBu,sincethere is–15to+45dBofgain(60dBrange)availablefor lineinputsviathegain[3]knob.Alwaysmakesure toperformthelevelsettingprocedureonpage5.
Toconnectbalancedlinestotheseinputs,use a1⁄4"Tip-Ring-Sleeve(TRS)plug,wiredasfollows: Tip=Positive(+orhot) Ring=Negative(–orcold) Sleeve=Shieldorground
Toconnectunbalancedlinestotheseinputs, usea1⁄4"mono(TS)phoneplug,wiredasfollows: Tip=Positive(+orhot) Sleeve=Shieldorground
3. Gain Yesit’strue,thesecontrolsarenotinthepatchbay
sectionatall.They’refoundalongthetoprowofknobsinthechannelstripsection.Buttheirpurposeissocloselylinkedwiththemicandlineinputjacksthatwecouldn’tbeartoseparatethem.Ifyouhaven’talready,pleasereadthelevel-settingprocedureonpage5.
Gainadjuststheinputsensitivityofthemicandlineinputs.Thisallowssignalsfromtheoutsideworldtobeadjustedtooptimalinternaloperatinglevels.
IfthesignaloriginatesthroughtheXLRjack,therewillbe0dBofgainwiththeknobfullydown,rampingto60dBofgainfullyup.
Throughthe1⁄4"input,thereis20dBofattenuationfullydownand40dBofgainfullyup,witha“U”(unitygain)markat10:00.This20dBofattenuationcanbe
veryhandywhenyouareinsertingaveryhotsignal,orwhenyouwanttoaddalotofEQgain,orboth.Withoutthis“virtualpad,”thisscenariomightleadtochannelclipping.
3
24
56
11Owner’s Manual
Ow
ne
r’s Man
ual
4. InsertTheseunbalanced1/4"jacksareforconnectingserial
effectsprocessorssuchascompressors,equalizers, de-essers,orfilters.Theinsertpointisafterthegain[3]control,butbeforethechannel’sEQ[32],lowcut[33],fader[25]andmute[30]controls.Insertcablesmustbewiredthusly:
Tip=send(outputtoeffectsdevice) Ring = return(inputfromeffectsdevice) Sleeve = commonground
Eventhoughchannels1–8alreadyhavedirectout[5]jacks,insertjackscanalsobeusedaschanneldirectoutputs;post-gain,pre-lowcut,andpre-EQ.Seetheconnectorsectiononpage29showingthreewaystouseinsertcables.
5. Direct OutFoundonlyonchannels1–8,thesebalanced1/4"
jacksdeliverthesignalfromtheveryendofthechannelpath;post-gain[3],post-EQ[32],post-lowcut[33],post-fader[25],andpost-mute[30].Theyarethekeyplayerin“splitmonitoring,”makingthe1604VLZ4 perfectforan8-trackstudio.
Split MonitoringWithsplitmonitoring,youusethefirsteightchannelsforyoursoundsources:vocalmics,drummics,keyboard/synthoutputs,guitar
effectsoutputs,thatsortofthing.Fromthere,thechannelsmanipulatethesound,butarenotassignedtotheoutputsection.Instead,they’repatchedfromthechannel’sdirectout[5]jackstothecorrespondingmultitrackinput(directout1tomultitrackinput1,2to2,3to3,etc.).Thesignalswillnowberecordedorpassdirectlythroughthemultitrack,dependingoneachtrack’srecord-readystatus.
tip
This plug connects to one of the mixer’s Channel Insert jacks. ring
tipring
sleeve
SEND to processor
RETURN from processor
(TRS plug)
multitrackmachine
sound sources
directoutputs
groupoutputs
1–8 9–16
Theoutputsofthemultitrackarethenpatched tothenexteightline[2]inputsonthe1604VLZ4 (multitrackout1tolineinput9,2to10,3to11,etc.).Thesechannels(9–16)willbeassignedtothemixer’soutputsection,deliveringthesignalstotheirultimatedestination,whichmaybeyourmixdown2-track,yourcontrolroomsystem,oryourheadphones.
Butlet’snotforgetthatthe1604VLZ4isa4-bus mixer.Thesebusesleadtothesubouts[8],andaredesignedtoaccomplishthetaskofgettingchannels tothemultitrackwithoutusingthedirectoutputs.
Forexample,achannelisassignedtosubout1. Subout1’soutputispatchedtomultitrackinput1.Fromthere,themultitrackoutputgoestothemixer’schannel9lineinput,aswejustdiscussed.(Hottip:Tofeedan8-trackdeckwith4suboutputs,simplyuseY-cords:subout1feedstracks1and5,2feeds2and6,3feeds3and7,and4feeds4and8.Tracksinrecordmodewillacceptthesignal,andtracksinsafemode willignorethesignal.)
Theadvantages:Youcanassignanychanneltoanytrack,withoutrepatching.Youcanassignmultiplechan-nelstoonetrackandcontroltheoveralllevelofthatsubgroup.Youcan’tbouncetrackswithoutthisfeature.
Perhapsthebestmethodistodoboth:Usethesuboutstofeedmultichannelsubmixes(likeadrumkit)tosomeofthetracks,andthedirectoutjackstofeedsingle-channelsignals(likebassguitar)totheothertracks.
Thepointisthatyouneverlistendirectlytothesourcechannels(1–8).Youlistentothemonitorchan-nels(9–16)andthey’relisteningtothemultitrackthatislisteningtothesourcechannels.(Makesuretoassignthemonitorchannels9-16totheL/Rmix,andnotthesourcechannels1-8.)Themainadvantageisthatyouwon’tbeforcedtoconstantlyrepatchyourmultitrack—justsetitupandforgetit.You’llalsoknowforcertainthatthesignalsareindeedgettingtothemultitrack,sinceyou’reconstantlylisteningtoit.
Anothermethodofinterfacingamultitrackiscalledinlinemonitoring,andrequiresadedicatedmixingconsole.Eachofitschannelsisactuallytwochannels:onecarryingthemic/linesoundsourceandtheothercarryingthemultitrackoutput.
6. Aux SendsThese1/4"jacksusuallypatchtotheinputsof
aparalleleffectsdevicesortotheinputsofstage monitoramps.Fordetailssee“AuxTalk”onpage23.
Effects: Serial Or Parallel?You’vehearduscarelesslytossaroundtheterms
“serial”and“parallel.”Here’swhatwemeanbythem:
“Serial”meansthattheentiresignalleavesthemixer[insert(4)send],isroutedthroughtheeffectsdevice,andreturnstothemixer[insertreturn].Examples:compressor/limiters,graphicequalizers.
“Parallel”meansthataportionofthesignalinthemixeristappedofftothedevice(auxsend),processedandreturnedtothemixer(stereoreturn)tobemixedwiththeoriginal“dry”signal.Thisway,multiple channelscanallmakeuseofthesameeffectsdevice.Examples:reverb,digitaldelay.
Dry Signal ProcessedSignal
InsertSend
InsertReturn
Dry Signal(s) Dry Signal(s)
AuxSend
AuxReturn
Wet Signal
Channel PathMix
Stage
OutputSection
ProcessedSignal
Signal Processor(e.g., Compressor)
Signal Processor(e.g., Reverb)
Dry Signal ProcessedSignal
InsertSend
InsertReturn
Dry Signal(s) Dry Signal(s)
AuxSend
AuxReturn
Wet Signal
Channel PathMix
Stage
OutputSection
ProcessedSignal
Signal Processor(e.g., Compressor)
Signal Processor(e.g., Reverb)
Dry Signal ProcessedSignal
InsertSend
InsertReturn
Dry Signal(s) Dry Signal(s)
AuxSend
AuxReturn
Wet Signal
Channel PathMix
Stage
OutputSection
ProcessedSignal
Signal Processor(e.g., Compressor)
Signal Processor(e.g., Reverb)
12 1604VLZ4
160
4V
LZ
4
9. C-R Outs (Control Room Outputs)These1/4"jacksareusuallypatchedtotheinputsof
acontrolroomamplifieroraheadphonedistributionamplifier.Tolearnhowsignalsareroutedtothese outputs,seectlroom/phones[43]onpage20.
10. Phones Out (On Front Panel)The1604VLZ4’sstereo1/4"phones
jackwilldriveanystandard headphonetoveryloudlevels. Tolearnhowsignalsareroutedtotheseoutputs,seectlroom/phones[43]onpage20.Ifyou’rewiringyourowncableforthephonesoutput:
Tip=leftchannel Ring = right channel Sleeve = commonground
WARNING:Whenwesaytheheadphone ampisloud,we’renotkidding.Itcancausepermanenteardamage.Evenintermediate
levelsmaybepainfullyloudwithsomeearphones. BE CAREFUL!Alwaysturnthectlroom/phones[43]knoballthewaydownbeforeconnectingheadphones.Keepitdownuntilyou’veputthephoneson.Thenturnitupslowly.Why?“Engineerswhofrytheirearsfindthemselveswithshortcareers.”
11. Tape OutTheseunbalancedRCAjackstapthemainmix
outputstomakesimultaneousrecordingandPAworkmoreconvenient.Connectthesetoyour2-track recorder’sinputs.Tolearnhowsignalsarerouted totheseoutputs,seemainmix[37]faderdetails onpage19.
Mono:Ifyouwanttofeedamonosignaltoyourtapedeckorotherdevice,simplyusethe1/4"mono[15]outputjack.
12. Tape InTheseunbalancedRCAjacksaredesignedtowork
withsemiproaswellasprorecorders.Connectyour2-tracktaperecorder’soutputshere,usingstandardhi-fiRCAcables.Tolearnhowsignalsareroutedfromtheseinputs,seetapein(level)[40]onpage20.
10
7. Stereo ReturnsThisiswheretoconnecttheoutputsofparallel
effectsdevices(orextraaudiosources).They’llacceptjustaboutanyproorsemiproeffectsdeviceonthe market.Tolearnhowsignalsareroutedfromtheseinputs,seestereoreturnlevel[51]onpage23.
Mono:Ifyouhaveaneffectsdevicewithamono output(onecord),plugthatintotheleftinputof astereoreturnandleavetherightinputunplugged.Thatway,thesignalwillbesenttobothsides, magicallyappearinginthecenterasamonosignal.
8. Sub Outs Thesefour1/4"jacksareusuallypatchedto
theinputsofamultitrackdeck,ortosecondary amplifiersinacomplexinstallation.Tolearnhow signalsareroutedtotheseoutputs,seesubgroup faders[38],page19.
Double BusingHowonearthdoyougetfourjackstofeedeight
tracks?Tofeedan8-trackdeckwithonlyfoursubouts,simplyusefourY-cords:
• SubOut1feedstracks1and5
• SubOut2feedstracks2and6
• SubOut3feedstracks3and7
• SubOut4feedstracks4and8
Tracksinrecordmodewillacceptthesignal,andtracksinsafemodewillignorethesignal.It’sthateasy.
Thismethodisexactlythesameasthedouble-busingfeaturefoundinothermixers.Built-indouble-busingisnothingmorethan
Y-cordslivinginsidethemixerinsteadofhangingouttheback.Ifwehadroomfortheextrajacks,wewouldhavethrownthemin,butwedon’t,sowedidn’t. Sonically,thereisnodifference.
Y-cordadvice:Donotusethestereo“headphone-to-left/right”splitteradapters.Usethetypethatsendthesamesignaltotwoplaces;thetipofthesourceplugfeedsthetipsofbothdestinationplugs.
16
18
19
9 11 7 8 12 13 15 14
13Owner’s Manual
Ow
ne
r’s Man
ual
Usethesejacksforconvenientplaybackofmixes.You’llbeabletoreviewamix,andthenrewindandtryanotherpasswithoutrepatchingordisturbingthemixerlevels.YoucanalsousethesejackswithaCDplayer tofeedmusictoaPAsystembetweensets.
WARNING:Pushingtapetomainmix[41] intheoutputsectioncancreateafeedbackpathbetweentapeinputandtapeoutput.
Makesureyourtapedeckisnotinrecord,record-pauseorinputmonitormodewhenyouengagethisswitch, ormakesurethetapeinlevelknobisfullycounter-clockwise(off).
13. Main InsertThese1/4"jacksareforconnectingserialeffectssuch
ascompressors,equalizers,de-essers,orfilters.Theinsertpointisafterthemixamps,butbeforethemainmix[37]fader.Insertcablesmustbewiredthusly: Tip=send(outputtoeffectsdevice) Ring = return(inputfromeffectsdevice) Sleeve = commonground
14. Main Outs These1/4"jacksareusuallypatchedtotheinputs
ofyour2-trackmixdowndeck(unlessyou’vechosen tousethetapeoutput[11]RCAjacks),ortothehouseamplifierduringlivesoundsessions.Tolearnhowsignalsareroutedtotheseoutputsseemainmix[37]faderdetailsonpage19.Tousetheseoutputstodrivebalancedinputs,connect1/4"TRS(Tip-Ring-Sleeve)phoneplugslikethis: Tip=Positive(+orhot) Ring=Negative(–orcold) Sleeve=Shieldorground
Tousetheseoutputstodriveunbalancedinputs, connect1/4"TS(Tip-Sleeve)phoneplugslikethis: Tip=Positive(+orhot) Sleeve=Shieldorground
15. Mono OutIthappenstoeverybodysoonerorlater:Theforces
thatgovernyourworldwilldemandamonaural outputfromyourpainstakingly-createdstereo panorama.Thelastthingyouwanttodoisstart twirlingallyourcarefully-placedpansettingstooneside.Whattodo?Stickacordinthis1/4"jack,hand theotherendtoMr.Mono,andyou’redone.He’sgot hismonomixandyou’vestillgotyourstereomix. Themonooutputisnothingmorethanamixof theleftandrightmainmix.
16. Mono LevelSo,Mr.Monocomesrunningback,screamingabout
themonomixbeingsoloudthathiscamcorderis melting.Justreachforthisknobandturnitdown abit.Justthethingforsendingmonosignalstomicinputslikecamcorders,telephoneinterfaceboxes,evenansweringmachines.Withthepotallthewayup(fullyclockwise),you’llhave6dBofextragain,withunitygainhalfwaybetweentheoneandtwoo’clockpositions.
17. Voltage SelectorLocatedonthebottompanel,isavoltageselector
switch.
WARNING: Beforeyouplugthe ACpowercordintothe1604VLZ4, youmustmakesurethatthisslide
switchissettothesamevoltageasthelocal ACmainssupply.Onlyslidethevoltageswitchwiththepowercordunplugged.
Useaflatheadedscrewdrivertoslidetheswitch ifneeded.Theswitchallowsyoutousethemixerin differentcountriesandvoltages,meetinterestingpeoplefromothercultures,andentertainthem.
18. Power ConnectionJustincaseyoulosethecordprovidedwiththe
1604VLZ4,itspowerjackacceptsastandard3-prongIECcordlikethosefoundonmostprofessional recorders,musicalinstruments,andcomputers.
WARNING:BeforeyouplugtheACpowercordintothe1604VLZ4,youmustmakesurethatthevoltageselector[17]slideswitchis
settothesamevoltageasthelocalACmainssupply.
WARNING:Disconnectingtheplug’sgroundpincanbedangerous.Don’tdoit.
17
14 1604VLZ4
160
4V
LZ
4
19
20 22
22. Phantom SwitchThisswitchcontrolsthephantompowersupply
forallthemic[1]inputs,asdiscussedonpage9. Whenturnedon(oroff),thephantompowercircuitrytakesafewmomentsforvoltagetorampup(ordown).Thisisperfectlynormal.Makesurethatyoupulldownthemasterfader,andheadphone/controlroomvolumebeforeengagingthephantomswitch.
23. 48V LEDLocatedrightnexttothepowerLED,thisisjusttolet
youknowwhichwayyouhavethephantom[22]switchset.Ifyourdynamicmicsworkandyourcondensersdon’t,chancesarethisLEDisoff,soturniton.
You’llnoticethatwhenyouturnthephantompoweroff,theLEDstaysonforawhile.Thisisanaturalphe-nomenon—theLEDisactuallyavoltmetertellingyouthatthephantompowertakestimetorampitselfdowntozerovolts.So,ifyou’veturnedphantompowerofftoconnectsomethingtothemicinputs,waituntiltheLEDstopsglowingandthenmakeyourconnectionssafely.
24. BNC Lamp SocketLocatedinthetoprightcorneroftheoutput
section,this12Vsocketwilldriveanystandard BNC-typelamp(aLittlite®#12Gor#12G-HI (high-intensity),forinstance).
19. FuseThe1604VLZ4isfusedforyour(anditsown)
protection.Ifyoususpectablownfuse,disconnect thepowercord,popoutthefusedrawerwithasmall flatscrewdriver,andreplacethefusewitha1ASLOBLO,5x20mm,availableatelectronicsstoresor yourdealer(ora500mASLOBLO5x20mmif your1604VLZ4issetto220V-240V).
Iftwofusesblowinarow,somethingisverywrong.Pleasecallourtoll-freenumber1-800-898-3211fromwithintheU.S.(orcallthedistributorinyourcountry)andfindoutwhattodo.
20. Power SwitchPressthetopofthisrockerswitchinwardstoturn
onthemixer.Thepowerled[21]onthetopsurface ofthemixerwillglowwithhappiness,oratleastit willifyouhavethemixerpluggedintoasuitable liveACmainssupply.
Pressthebottomofthisswitchtoputthemixerintostandbymode.Itwillnotfunction,butthecircuitsarestilllive.ToremoveACpower,eitherturnofftheACmainssupply,orunplugthepowercordfromthemixerandtheACmainssupply.
Asageneralguide,youshouldturnthemixeron first,beforethepoweramplifierorpoweredspeakers,andturnitofflast.Thiswillreducethepossibilities ofanyturn-on,orturn-offthumpsinthespeakers.
21. Power LEDYou’veprobablyalreadyfiguredthisout,butifthe
power[20]switchison,thisLED(light-emittingdiode),locatedintheoutputsection,willlight.Iftheswitchisoff,well,yougettheidea.IfthepowerswitchisonandtheLEDdoesnotglow,oneofthreethingshashappened:Somebodytrippedoverthepowercordandyankeditfromtheoutlet,yourelectricityhasbeenturnedoffduetononpayment,orthefusehasblown.
23 21
24
15Owner’s Manual
Ow
ne
r’s Man
ual
Channel Strip Description
25
26
The16channelstripslookalikeandfunctionidentically.Soifyoulearnone,youhavelearnedthemall.Theonly differenceisthattheeightonthelefthavedirectout[5]jacksandtheeight ontherightdon’t.We’llstartatthe bottomandworkourwayup.
“U” Like Unity GainVLZ4mixershavea“U”symbolon
almosteverylevelcontrol.This“U”standsfor“unitygain,”meaningnochangeinsignallevel.Onceyouhaveperformedthelevel-settingprocedure,youcanseteverycontrolat“U”andyoursignalswilltravelthroughthemixeratoptimallevels.What’smore,allthelabelsonourcontrolsaremeasuredindecibels(dB),soyou’llknowwhatyou’redoinglevel-wiseifyouchoosetochangeacontrol’ssettings.
25. Channel FaderThefaderisalmostthelastcontrol
inachannel’ssignalpath.It’splaced aftertheEQ[32]andmute[30] controls(post-EQ/post-mute)and beforethepan[31]control(pre-pan).The“U”mark,aboutthree-quartersof thewayup,indicatesunitygain,meaning noincreaseordecreaseofsignallevel. Allthewayupprovidesanadditional 10dB,shouldyouneedtoboostasectionofasong.Ifyoufindthattheoveralllevelistooquietortooloudwithafadernearunity,you’llwanttoconfirmthesettingbyperformingthelevel-settingprocedureonpage5.
A Clean FadeFadersarenotrocketscience—they
operatebydraggingametalpin(thewiper)acrossacarbon-basedstrip(thetrack).Itispossibleforairbornecrudto
landonthetrack.Shouldthathappen,youmayhearscratchynoisesorsignaldropoutsasthewiperstumblesoverthecrud.Doallyoucantokeepairbornecrudoutofyourprofession.Useair-conditionedroomswheneverpossible,avoidsmokingnearthemixer,keepfoodanddrinkawayfromthemixer,andforpity’ssake,never putthemixerinyourkitchen!Wealsorecommend“exercising”thefaders—givethemafewfull-travelexcursionsonceaweekorso,andthatwillhelpscarethecrudaway.Donotusespraycleaners,ratherusecompressedair,oravacuumwithbrushattachment.
26. Assign (1–2, 3–4, L–R)Alongsideeachchannelfaderarefourbuttons,
labeledsolo,1–2,3–4andL–R.Thelatterthreearecollectivelyreferredtoaschannelassignmentswitches.1,3andLaretheleftsidesofthesestereopairs,and2,4andRaretherightsides.Usedinconjunctionwiththechannel’span[31]knob,theseswitchesdeterminethedestinationofachannel’ssignal:Withpansetatthecenterdetent,theleftandrightsidesreceiveequalsignallevels.Tofeedonlyonesideortheother,justturnthepanknobaccordingly.
Ifyou’redoingamixdowntoa2-track,simplyengagetheL–Rswitchoneachchannelthatyouwanttohear,andthey’llbesenttothemainmix.Ifyouwanttocreateasubgroupofcertainchannels,engageeitherthe1–2or3–4switchesinsteadoftheL–R,andthey’llbesenttotheappropriatesubgroupfaders.Fromthere,thesubgroupscanbesentbacktothemainmix,allowingyoutousethesubgroupfadersasamastercontrolforthose channels.
Ifyou’reprintingnewtracksorbouncingexistingones,you’llalsousethe1–2and3–4switches,but nottheL–Rswitch.Here,youdon’twantthesubgroupssentbackintothemainmix,butsentout,viathe subouts[8]jacks,toyourmultitrackinputs. However,ifyou’reprintingtracksviathedirect out[5]jacks,allthechannelassignmentswitchesshouldbedisengaged(up).
The1604VLZ4iswhatwecalla“true4-busmixer.”Eachchannelmaybeassignedorunassignedtoanyofthesubgroupswithoutaffectingtheothersubgroups orsettingswithinthechannel,andeachsubgrouphasitsownmasterfaderanddedicatedoutput.Infact,sincethereare4subgroupsandthemainL/Rmix, it’sactuallyatrue6-busmixer.Wecouldhavenamed itthe1606VLZ4.Darn!
16 1604VLZ4
160
4V
LZ
4 27. SoloThislovableswitchallowsyoutochecksignalsin
thephonesorcontrolroomwithouthavingtoassignthemtotheL-R,1-2or3-4mixes.Youcansoloas manychannelsasyoulike.Solodoesnotinterrupt anyoftheotherchannels,busesoroutputs—that’scallednondestructivesolo.
Usingthemode[44]switch,the1604VLZ4’ssolosystemcomesintwoflavors:normal(AFL)(sometimescalledSIP,orsolo-in-place)andlevelset(PFL)(sometimescalledPFL, orpre-fader-listen).Themodeswitchisdescribed intenderlovingdetailonpage21.
Levelset(PFL)tapsthechannelsignalbeforethefader.Ifyouhaveachannel’sfadersetwaybelow“U”(unitygain),solowon’tknowthat
andwillsendaunitygainsignaltothecontrolroom,headphones,andmeterdisplay.Thatmayresultin astartlinglevelboostattheseoutputs,depending onthepositionofthesolo[46]levelknob.
Inanutshell,soloedchannelsaresenttothesource[42]mix,thatultimatelyfeedsyourcontrolroom, headphonesandmeterdisplay.Wheneversolois engaged,allsourceselections(mainmix,1–2,3–4, andtape)aredefeated,toallowthesoloedchannel todojustthat—solo!
28. –20 (Solo) LEDAnLEDthatdoestwocompletely
differentthings!Savesspace,recycles theplanet,butrequiressome explanation.First,the“–20”part: Oftenreferredtoas“signalactivity,” thisLEDwillflickerintimewiththesignalpresentinthatchannel.It’shandyforconfirmingthatachannelisindeedactive,andmayalsolendaclueastowhatthesignalis.Forinstance,akickdrumwillcausetheLEDtopulseintimewiththedrum,andasynthpadwillcauseittoglowabitmoresteadily.
Nowforthe“solo”part.Whena channel’ssoloswitchisengaged,this LEDwillglowsteadily,withoutflickering.Itwillalsobebrighterthanitwouldbe asa–20indicator.Inconjunctionwiththerudesololight[47],youcanfind aroguesoloswitchquickly.
292827
3031
32
29. OL (Mute) LEDAnotherLEDthatdoestwocompletelydifferent
things!First,the“OL”part:“OL”meansoverload,orclip.Youdon’twantthattohappen.Ever.Clippingcanhappentoanymixer—it’sthepointwherethesignal’svoltagetriestoexceedthesupplyvoltagesthatpowerthecircuitry.The1604VLZ4’sOLLEDwillcomeonjustbeforeclipping,soifyouseeit,takeimmediateaction:Performthelevel-settingprocedureonpage5.Ifthatdoesn’thelp,checkforexcessiveuseofEQboostorfadergain.Likethe–20LED,itwilltendtoflickerintimewiththatchannel’ssignal.
Nowforthe“mute”part.Assumingyourlevelsaresetcorrectly,theOLLEDwillnevercomeonasaresultofclipping.That’sprettyboring.So,toliventhingsup,thisLEDwillglowsteadilywhenthatchannel’smute[30]switchisengaged.
HereisaquickreferencetotheseLEDs:
30. MuteEngagingthisswitchprovidesthesameresults
asturningthechannel'sfaderallthewaydown: AnychannelassignmenttoL-R,1-2or3-4willbe interrupted.Allthepostauxsendswillbesilenced, aswillthedirectoutsignalsonchannels1through8,andtheOL(mute)LEDwillglow.Thepreauxsends,channelinsertsend,andsolo(inlevelset(PFL)mode)willcontinuetofunctionduringmute.
Dependingontheaudiocontentinachannel, engagingitsmuteswitchmaycauseaslightpoppingsound.Thisisnotaproblemwithinthemixer,andit canbeavoided:Simplyengagethelowcut[33]switchoneachchannel(unlessitslowfrequencycontentisvitallyimportant,suchasakickdrumorbassguitar).Lowcuteliminatessubsonicdebris,whichcausesthepop,anditseffectisusuallytransparent.
Name Color Flickering Glowing
–20(SOLO) green signalpresent channel soloed
OL(MUTE) red channelclipping channelmuted
17Owner’s Manual
Ow
ne
r’s Man
ual
ThelowEQprovidesupto15dBboostorcutbelow80Hz.Thecircuitisflat(noboostorcut)atthecenterdetentposi-tion.Thisfrequencyrepresentsthepunchinbassdrums,bassguitar,fatsynthpatches,andsomereallyseriousmalesingerswhoeatbrokenglassforbreakfast.
Usedinconjunctionwiththelowcut[33]switch, youcanboostthelowEQwithoutinjectingatonof subsonicdebrisintothemix.Werecommendusing thelowcutfeatureonallchannels,exceptlow frequencysignals,likekickdrumsandbassguitars.
ThemidEQ,or“midrange,”hasafixedbandwidthof1octave.Themidknobsetstheamountofboostorcut,upto15dB,andiseffectivelybypassedatthecenterdetent.Thefrequencyknobsetsthecenterfrequency,sweepablefrom100Hzto8kHz.
Mostoftherootandlowerharmonicsthatdefineasoundarelocatedinthe100Hz–8kHzfrequencyrange,andyoucancreatedrasticchangeswiththesetwoknobs.ManyengineersusemidEQtocutmidrangefrequencies,notboostthem.Onepopulartrickistosetthemidfullyup,turnthefrequencyknobuntilyoufindapointwhereitsoundsjustterrible,thenbackthemiddownintothecutrange,causingthoseterriblefrequen-ciestodisappear.Soundssilly,butitworks.Sometimes.
ThehiEQprovidesyouup to15dBboostorcutabove 12kHz,anditisalsoflatatthedetent.Useittoaddsizzletocymbals,anoverallsenseoftransparency,oranedgeto keyboards,vocals,guitarandbaconfrying.Turnitdownalittletoreducesibilance ortomasktapehiss.
WithtoomuchEQ,youcanscrewthingsuproyally.We’vedesignedalotofboostandcutintoeachequalizercircuitbecauseweloveyou,andknowthateveryonewilloccasionallyneedthat.ButifyoumaxtheEQoneverychannel,you’llgetmixmush.Equalizesubtlyandusetheleftsidesoftheknobs(cut),aswellastheright(boost).Ifyoufindyourselfrepeatedlyusingfullboostorcut,consideralteringthesoundsource,such asplacingamicdifferently,tryingadifferentkindofmic,changingthestrings,orgargling.
20Hz 100Hz 1kHz 10kHz 20kHz–15
–10
–5
0
+5
+10
+15
20Hz 100Hz 1kHz 10kHz 20kHz–15
–10
–5
0
+5
+10
+15
20Hz 100Hz 1kHz 10kHz 20kHz–15
–10
–5
0
+5
+10
+15
31. PanThisadjuststheamountofchannelsignalsentto
theleftversustherightoutputs.PandeterminesthefateoftheL-Rassignment,subgroups1–2and3–4,andthesolo(inAFLmode).Withthepanknobhardleft,thesignalwillfeedtheleftmainmix,subgroup1,subgroup3andleftnormal(AFL)solomode(assumingtheirassignmentswitchesareengaged).Withtheknobhardright,signalfeedstherightmainmix,subgroup2,subgroup4andrightnormal(AFL)solomode.Withpansetsomewherein-betweenleftandright,thesignalwillbedividedbetweentheleftandrightbuses.
Stereo SourcesYourlifewillbeeasierifyoufollowthisstandard
convention:Whenpatchingstereosoundsources toamixer,alwaysplugtheleftsignalintoan“odd” channel(1,3,5,etc.)andtherightsignalintothe adjacent“even”channel(2,4,6,etc.).Thenpanthe oddchannelhardleftandtheevenchannelhardright.
Constant Loudness ! ! !The1604VLZ4’spancontrolsemployadesigncalled“ConstantLoudness.”Ithasnothingtodowithlivingnexttoafreeway.Asyouturn
thepanknobfromlefttoright(therebycausingthesoundtomovefromthelefttothecentertotheright),thesoundwillappeartoremainatthesamevolume (orloudness).
Ifyouhaveachannelpannedhardleft(orright)andreading0dB,itmustdipdownabout4dBontheleft(orright)whenpannedcenter.Todootherwise,likethoseBrandXmixers,wouldmakethesoundappearmuchlouderwhenpannedcenter.
32. 3-Band Mid-Sweep EQThe1604VLZ4hasa3-band,mid-sweepequalization:
lowshelvingat80Hz,midsweeppeakingfrom100Hz to8kHz,andhishelvingat12kHz.It’sprobablyall theEQyou’lleverneed!(Shelvingmeansthatthecircuitryboostsorcutsallfrequenciespastthe specifiedfrequency.Forexample,the1604VLZ4’s lowEQboostsbassfrequenciesbelow80Hzandcontinuingdowntothelowestnoteyouneverheard.Peakingmeansthatcertainfrequenciesforma“hill”aroundthecenterfrequency.)
20Hz 100Hz 1kHz 10kHz 20kHz–15
–10
–5
0
+5
+10
+15
18 1604VLZ4
160
4V
LZ
4 33. Low Cut Thisswitch,oftenreferredtoasahighpassfilter(all
dependsonhowyoulookatit),cutsbassfrequenciesbelow75Hzatarateof18dBperoctave.Thisain’tnothrown-indime-storefilter—an18dBperoctavecurverequiresanelaboratecircuit.Nothingbutthebest.
Werecommendthatyouusethisoneverysoundsourceexceptkickdrum,bassguitar,orbassysynthpatches.Theseaside,thereisn’tmuchdowntherethatyouwanttohear,andfilteringitoutmakesthelowstuffyoudowantmuchmorecrispandtasty.Notonlythat,butlowcutcanhelpreducethepossibilityoffeedbackinlivesituations,andithelpstoconserveamplifierpower.
Withlowcut,youcansafelyboostlowEQ.Manytimes,bassshelvingEQcanreallybenefitvoices.Troubleis,addinglowEQalsobooststhesubsonic debris:Stagerumble,michandlingclunks,windnoiseandbreathpops.LowcutremovesallthatdebrissoyoucanboostthelowEQwithoutblowingyoursubwoofers.
Here’safrequencycurveoflowEQcombinedwith lowcut:
34. Aux 1, 2, 3, & 4Thesefourknobstapaportionofeach
channel’ssignal,mixthemtogetherandsendthemtotheauxsend[6]outputs.Theyareoffwhenturnedfullydown,deliverunitygainatthecenterdetent,andcanprovideupto15dBofgainturnedfullyup.Chancesareyou’llneverneed thisextragain,butit’snicetoknowit’sthereifyoudo.
Theauxsendoutputsarethenpatchedtoparalleleffectsprocessorinputsorstagemonitorampinputs.Auxsends1and2 levelsarecontrollednotonlybythe channel’sauxknobs,butalsobythe auxsend[49]masterknobs.
Auxsendscanalsobeusedto generateseparatemixesforrecording or“mix-minuses”forbroadcast.Byusingaux1or2inthepre[35]mode,these mixlevelscanbeobtainedindependentlyofachannel’sfader[25]settings.
20Hz 100Hz 1kHz 10kHz 20kHz–15
–10
–5
0
+5
+10
+15
33
36
34
35
Werecommendgoingintoastereoreverbinmonoandreturninginstereo.Wehavefoundthatonmost“stereo”reverbs,thesecond
inputjusttiesupanextraauxsendandaddsnothingtothesound.Thereareexceptions,sofeelfreetotryitbothways.Shouldyouchoosetousetwoauxsends, usethe“odd”aux(1,3or5)tofeeditsleftinputandthe“even”aux(2,4or6)tofeedtherightinput.Remember,ifyou’realsodealingwithastereosourcesignal,you’llwanttofollowthesides—usetheoddauxonthechannelcarryingtheleftsideandtheevenauxonthechannelcarryingtheright.
35. PreThisswitchdeterminesthetappointofaux1and2.
Generally,“post”sendsareusedtofeedeffectsdevices,and“pre”sendsareusedtofeedyourstagemonitors.Seethe“Prevs.Post”diagrambelow.Aux3through6arealwaysinpostmode.
Inpostmode(switchup),aux1and2willfollow theEQ[32],lowcut[33],fader[25],andmute[30]settings.Ifyoufadethechannel,youfadethesend. Thisisamustforeffectssends,sinceyouwant thelevelsofyour“wet”signalstofollowthelevel ofthe“dry.”
Inpremode(switchdown),aux1and2followthegainandlowcutsettingsonly.EQ,pan,fader,andmutesettingshavenoeffectonthepresends.Thisisthepreferredmethodforsettingupstagemonitorfeeds—they’llbecontrolledindependentlyofthefaderandmutemoves.
36. 5/6 ShiftDon’tletthefactthatthere’sonlyfourauxknobs
perchannelfoolyou—the1604VLZ4hassixaux sends[6].Withthis5/6shiftswitchup,theknobs labeledaux3andaux4delivertheirsignalstoaux send3and4outputs.Withthisswitchdown,the signalsappearattheauxsend5and6outputs.
Werecommendthatauxsend3and4bepatchedintoyour“utility”effects,likeashortreverbandslapdelay;effectsyouuseallthetime.Useauxsend5and6for“exotic”effects,likeharmonizersandmulti-tapdelays;theyarenotlikelytobeusedasoften.
INPUT TRIM INSERTLOWCUT EQ
PAN ASSIGNMUTE
FADER
'POST' SIGNAL'PRE' SIGNAL
PRE SWITCH
AUX 1
AUX 2
19Owner’s Manual
Ow
ne
r’s Man
ual
Output Section DescriptionYou’vejustlearnedabouttheinputchannelsandhow
thesignalsgetinandout.Thesignalscomeinviamic[1]andline[2]inputjacks,aremanipulatedbythechannels,andthensenttotheoutput(master)section.Thingsgetalittlemorecomplicated,soputonyourthinkingcaps,takeadeepcleansingbreath,takethismanual,getonabycycle,ridedowntothecanal,ponderyourlifeandallitsuniqueexperiences,thenreadthissection.
3738
39
37. Main Mix FaderThisfadercontrolsthelevelsofsignalssenttothe
mainout[14]jacksandtapeoutput[11]RCAjacks.Allchannelsandstereoreturnsthatareassignedtothemainmix,notmutedandnotturnedfullydownwill appearatthemainouts.Beforethemainmixgetstothisfader,thesignalspassthroughthemaininsert[13].
Themainmixsignalsareoffwiththefaderfullydown,the“U”markingisunitygain,andfullyupprovides 10dBadditionalgain.Thisadditionalgainwilltypicallyneverbeneeded,butonceagain,it’snicetoknow it’sthere.Thefaderitselfisastereoversionofthe channelandsubgroupfaders—samesupersmooth customtaper,samedeadsilencewhenturnedfullydown.Thisisthefadertopulldownattheendofthesongwhenyouwant“TheGreatFade-Out.”
38. Subgroup FadersAsyoumightexpect,thesefaderscontrolthelevels
ofsignalssenttothesubouts[8].Allchannelsthatareassignedtosubgroupswiththeassign[26]switches,notmutedandnotturnedfullydownwillappearatthesubouts.Unlikethemainout[14],thesubgroupsignalsdonotpassthroughaninsertjackontheirwaytothesubgroupfaders.That’snoproblem—shouldyouwanttosendthesesignalsthroughaserialeffectsprocessor,simplypatchfromthesuboutstotheeffect’sinput, andfromtheeffect’soutputtowhateverthefinal destinationis,usuallyamultitrackrecorder.
Thesubgroupsignalisoffwhenitsfaderisfullydown,the“U”markingisunitygain,andfullyupprovides 10dBadditionalgain.Rememberthatifyou’re treatingtwosubgroupsasastereopair,subgroup 1and2forexample,makesurethatbothsubgroup faders“ride”together,tomaintaintheleft/rightbalance.
39. Assign To Main MixOnepopularuseofthesubgroupsistousethem
asmasterfadersforagroupofchannelsontheirway tothemainmix.Let’ssayyou’vegotadrumkithogging upsevenchannelsandyou’regoingtowanttofadethemoutatadifferentratethantheotherchannels.Youdon’twanttotrythatwithsevenhandsorsevenfingers, sojustun-assignthesechannelsfromL–R,reassignthemtosubgroup1–2,engagetheassigntomainmix,leftonsubgroup1andtheassigntomainmix,right onsubgroup2.Nowyoucanridetheentirestereodrummixwithtwofaders—1and2.
Ifyouengagejustoneassigntomainmixswitchpersubgroup(leftorright),thesignalsenttothemainmixwillbethesamelevelasthesubouts[8].Ifyouwantthesubgrouptoappearinthecenterofthemain
20 1604VLZ4
160
4V
LZ
4 mix,engageboththeassigntomainmix,leftandrightswitches.Thesignalwillbesenttobothsides,and willbeattenuatedjustenoughtopreserveconstantloudness,justlikethechannelpan[31]knobswhen set in the center.
40. Tape In (Level)Thisknobcontrolsthelevelofthestereosignalcom-
ingfromthetapeinput[12]RCAjacks.Itsrangeisoffwhenfullydown,unityatthecenterdetent,with20dBadditionalgainturnedfullyup,whichmaycomeinhandyifyou’vepatchedinadevicewithwimpyoutputlevels.Afterthelevelisdetermined,thestereotapesignalcanbesenttoeitheroftwoplaces—themainmixorthesource[42]matrix.
40
41
42
43
44
47
4546
41. Tape To LREngagingthisswitchisjustlikeengagingtheL-R
switchonachannel—thesignal,stereointhiscase,issenttothemainmix.Itdoesnotinterruptothersignals,justaddsitselftothem.Thisswitchcanbeveryhandyinalivesoundsituationwhenyouwanttoplaysoothingelevatormusictoananxiouscrowd.
WARNING:Engagingtapetomainmixcancreateafeedbackpathbetweentapeinput[12]andtapeoutput[11].Makesureyour
tapedeckisnotinrecord,record-pauseorinput monitormodewhenyouengagethisswitch,orthat thetapein[40]levelknobisturnedfullydown.
42. Source Typically,theengineersendsthemainmixtoan
audienceortoamixdowndeck(ifrecording).Butwhatiftheengineerneedstohearsomethingotherthanthemainmix?Withthe1604VLZ4,theengineerhasseveralchoicesofwhattolistento.Thisisoneofthosetrickyparts—haveadoubleespressofirst.
Usingtheseswitches,youcanchoosetolistentoanycombinationofmainmix,subs1-2,subs3-4andtape.Selectionsmadeheredeliverstereosignalstothe controlroom,headphones,andmeterdisplay.Thesesignalsaretappedoffasfollows—post-mainmixfader,postsubgroupfaders[38],andpost-tapein[40]knob.Withnoswitchesengaged,therewillbenosignal attheseoutputsandnometerindication,withtwoexceptions:soloandstereoreturn4.
Regardlessofthesourcematrixselection,engagingasoloswitchwillreplacethatselectionwiththesolosignal,alsosenttothecontrolroom,headphones,andmeterdisplay.Thisiswhatmakesthelevel-settingproceduresoeasy.
Nowyouknowhowtoselectthesignalsyouwant tosendtotheengineer’scontrolroomand/orphones.Onceselected,thesesignalsallpassthroughthesamelevelcontrol,aptlynamed:
43. CR/PhonesAsyoumightexpect,thisknobcontrolsthelevels
ofboththestereocontrolroom,andtheheadphones.Makesurethatyoumoveittominimumbeforeselectingoraddinganewsource.
Whateveryourselection,youcanalsouse thecontrolroomoutputsforotherapplications. Thesoundqualityisjustasimpeccableasthemain outputs.Itcanbeusedasanadditionalmainmix outputandthisonewillhaveitsownlevelcontrol. However,shouldyoudothis,beawarethatifyou engageasolo[27]switch,thatwillinterruptthemix:
21Owner’s Manual
Ow
ne
r’s Man
ual
Engagingasoloswitchwillcausethisdramaticturnofevents:Anyexistingsourcematrixselectionswillbereplacedbythesolosignals,appearinginthecontrolroom,headphonesandmeterdisplay.Theaudiblesololevelsarecontrolledbythesolo[46]levelknob. Thesololevelsappearingonthemeterdisplay arenotcontrolledbyanything—youwouldn’twantthat.Youwanttoseetheactualchannellevelon thedisplay,regardlessofhowloudyou’relistening.
44. Mode (AFL/PFL)The1604VLZ4’ssolosystemcomesintwoflavors:
AFL(sometimescalledSIP,orsolo-in-place)andPFL(sometimescalledPFL,orpre-fader-listen).
InAFL,thesoloedchannel’ssignalissentdirectly tothecontrolroom,headphonesandmeterdisplayjustasitwouldsoundtothechannel’sassignmentswitches:post-EQ[32],post-fader[25]andpost-pan[31]. Theonlydifferenceisthatsoloworksregardless ofthechannel’sassignmentpositions,andthat makesitreallyhandy—youcancheckouta channelbeforeyouassignit.
AFListhepreferredmodeduringmixdown: Ifthechannelhassomemidrangeboostat4.236kHz,ispannedasmidgentotheleft,anditsfaderisat–5.385dB,that’sexactlywhatyou’llhearifyousolo duringAFLmode.It’sjustasifyoutookthetimetomutealltheotherchannels.
PFLsoloisthekeyplayerintheall-important level-settingprocedure.It’llsendthechannel’s actualinternallevelstothemeterssoyou’llknow justwhat’sgoingon,level-wise.Thisprocedureshouldbeperformedeverytimeanewsoundsourceispatchedintoachannel’smic[1]orline[2]inputjacks.
PFLisalsothepreferredmodeforSR(sound reinforcement,orlivesound),topreviewchannelsbeforetheyareletintothemix.Itwon’tgiveyoustereoplacement,butwillgiveyousignalevenifthefader isturneddown.
Remember,PFLtapsthechannelsignalbeforethefader.Ifyouhaveachannel’sfadersetwaybelow“U”(unitygain),solowon’tknowthat
andwillsendaunitygainsignaltothecontrolroom,headphones,andmeterdisplay.Thatmayresultinastartlinglevelboostattheseoutputs,dependingonthepositionofthesolo[46]levelknob.
45. Level Set LEDWhenthemodeswitch[44]isengaged,it’sinPFL
mode,themodeyoumustbeintosetlevels.Now,whenyouengageanysoloswitch,thisLEDwillbea“greenlight”tosetlevels.IfyoutriedtosetlevelsduringAFLmode,themeterdisplaywouldbeatthemercyofthechannelfader,andthatwouldbeabigproblem.
46. Solo (Level)Thisknobcontrolsthelevelofthesignalscoming
fromthesolosystem.Afterthesololevelisdetermined,thesolosignalswillproceedtotakeoverthecontrolroom,headphones,andmeterdisplay.
Onceagain,PFLsolotapsthechannelsignalbeforethefader.Ifyouhaveachannel’sfadersetwaybelow“U”(unitygain),PFLsolo
won’tknowthatandwillsendaunitygainsignalto thecontrolroom,headphones,andmeterdisplay.Thismayresultinastartlinglevelboostattheseoutputs,dependingonthepositionofthesololevelknob.
47. Rude Solo LightThisflashingLED(lightemittingdiode)serves
twopurposes—toremindyouthatyou’reinsolo, andtoletyouknowthatyou’remixingona1604VLZ4.Noothercompanyissoconcernedaboutyourlevelofsoloawareness.Weevenforcethesoloedchannel’s–20LEDtoplayalong,soyoucanfindthatrogueswitchfast.
Ifyouworkonamixerthathasasolofunctionwith noindicatorlights,andyouhappentoforgetyou’re insolo,youcaneasilybetrickedintothinkingthatsomethingiswrongwithyourmixer.Hencetherudesololight.It’sespeciallyhandyatabout3:00inthemorning,whennosoundiscomingoutofyourmonitors,eventhoughyourmultitrackisplayingbacklikemad.
22 1604VLZ4
160
4V
LZ
4 48. MetersThe1604VLZ4’speakmeteringsystemismadeupof
twocolumnsoftwelveLEDs.Deceptivelysimple, consideringthemultitudeofsignalsthatcanbe monitoredbyit.Ifnothingisselectedinthesource[42]matrix,andnochannelsareinsolo[27],themeterdisplaywilljustsitthere.Toputthemtowork, youmustmakeaselectioninthesourcematrix (orengageachannel'ssoloswitch).
Why?Youwantthemeterdisplaytoreflectwhattheengineerislisteningto,andaswe’vecovered,theengineerislisteningeithertothecontrolroomoutputortheheadphones.TheonlydifferenceisthatwhilethelisteninglevelsarecontrolledbytheCR/phones[43]knob,themeterdisplayreadsthesourcemixbefore thatcontrol,givingyoutherealfactsatalltimes, evenifyou’renotlisteningatall.
Whenthesolomode[44]switchissettoPFL(down),allsoloedsignalswillbesenttotheleftmeteronly.That,combinedwiththelevelsetLED[45],arealongthepathofenlightenmentknownasthelevel-settingprocedure(page5).DuringAFLmode,themeterswillbehavenormally.
48
42
43
44
45
Meters vs. RealityYoumayalreadybeanexpertattheworldof“+4”(+4
dBu=1.23V)and“–10”(–10dBV=0.32V)operatinglevels.Basically,whatmakesamixeroneortheotheristherelative0dBVU(or0VU)chosenforthemeterdisplay.A“+4”mixer,witha+4dBusignalpouringoutthebackwillactuallyread0VUonitsmeterdisplay.A“–10”mixer,witha–10dBVsignaltricklingout,willread,youguessedit,0VUonitsmeterdisplay.Sowhenis0VUactually0dBu?Rightnow!
Attheriskofcreatinganotherstandard,VLZ4 compactmixersaddresstheneedofbothcrowds bycallingthingsastheyare:0dBu(0.775V)attheoutputshowsas0VUonthemeterdisplay.Whatcouldbeeasier?Bytheway,themostwonderfulthingaboutstandardsisthattherearesomanytochoosefrom.
Thankstothe1604VLZ4’swidedynamicrange, youcangetagoodmixwithpeaksflashinganywherebetween–20and+10dBonthemeterdisplay. Mostamplifiersclipatabout+10dB,andsome recordersaren’tsoforgivingeither.Forbestreal-worldresults,trytokeepyourpeaksbetween“0”and“+7.”
Pleaseremember:Audiometerdisplaysarejusttoolstohelpassureyouthatyourlevelsare“intheballpark.”Youdon’thavetostareatthem(unlessyouwantto).Ifyoufindthatstaringatthemeterssendsyouintoahypnotictrance,pleasedonotbealarmed.JustcutmylawnandpolishmycareveryTuesday.
23Owner’s Manual
Ow
ne
r’s Man
ual
Aux TalkSendsareoutputs,returnsareinputs.Eachchannel's
aux[34]knobstapthesignaloffthechannelandsendittotheauxsend[6]outputs.Aux1and2aresenttotheauxsends1and2[49]masterknobsbeforetheauxsendoutputs;aux3through6aresentdirectly.
Theseoutputscanbefedtotheinputsofareverborotherdevice.Fromthere,theoutputsoftheexternaldevicearefedbacktothemixer’sstereoreturn[7]inputs.Thenthesesignalsaresentthroughthestereoreturn[51]levelcontrols,andfinallydeliveredtothemainmix.
So,theoriginal“dry”signalscomefromthechannelstothemainmix,andtheaffected“wet”signalscomefromthestereoreturnstothemainmix,andoncemixedtogether,thedryandwetsignalscombinetocreateaglorioussound.Armedwiththisknowledge,let’svisittheAuxiliaryWorld:
49. Aux Sends (Master)Theseknobsprovideoveralllevelcontrolofauxsends
1and2,justbeforethey’redeliveredtotheirauxsend[6]outputs.Thisisperfectforcontrollingthelevelofstagemonitors,sinceyou’llbeusingaux1and2forthis,withtheirpre[35]switchesengaged.Auxsends3through6havenosuchcontrol—they’lljustsendtheirmixesdirectlytotheirrespectiveauxsendoutputsatunitygain.
Theseknobsgofromoff(turnedfullydown),tounitygainatthecenterdetent,with10dBofextragain(turnedfullyup).Aswithsomeotherlevelcontrols,youmayneverneedtheadditionalgain,butifyoueverdo,you’llbegladyouboughta1604VLZ4.
Thisisusuallytheknobyouturnupwhentheleadsingerglaresatyou,pointsathisstagemonitor,andstickshisthumbintheair.(Itwouldfollowsuitthatifthesingerstuckhisthumbdown,you’dturntheknobdown,butthatneverhappens.)
50. Aux Sends SoloOnceagain,inlivesoundsituationsauxsend1and
2arelikelytofeedyourstagemonitors.You’llwanttocheckthemixyou’resendingthem,andthat’swhatthesetwobuttonsarefor.(Aux3throughaux6havenosuchswitch.)BesideeachswitchisagreenLEDthat,justlikethechannel’s–20LED[28],helpsyoufindtheroguesoloswitch.
Theonlythingdifferentaboutauxsendssoloisthatit’snotreallyPFL(pre-faderlisten),andit’snotreallySIP(solo-in-place),it’sactuallyAFL(after-fader listen).DuringAFL[44]mode,you’llgetauxsend1’ssolosignal,post-auxsends[49]masterlevel,intheleftsideofthecontrolroomoutputs,phonesoutputand meterdisplay,andauxsend2ontherightside.(Ifyoueveruseaux1and2tocreateastereomonitormix,you’llunderstandwhy.)InPFLmode,you’llgetthe signaldead-center,butstillpost-auxsendsmasterlevel.
51. Stereo Returns (Level)Thesefourcontrolssettheoveralllevelofeffects
receivedfromthestereoreturn[7]inputjacks.Thesecontrolsaredesignedtohandleawiderangeofsignallevels—eachknobgoesfromoff,tounitygainatthedetent,to20dBgainfullyclockwise,tocompensateforlow-leveleffects.Signalspassingthroughtheselevelcontrolswillproceeddirectlytothemainmixfader[37],withexceptionsthatwe’lldiscussinamoment.
Typically,theseknobscanjustliveatthecenterdetent,andtheeffectsdevice’soutputcontrolshouldbesetatwhatevertheycallunitygain(checktheirmanual).Ifthatturnsouttobetooloudortooquiet,adjusttheeffectsdevice’soutputs,notthemixer. Thatway,themixer’sknobsareeasytorelocate at the center detent.
51
51
52
53 54
55 56
49
50
24 1604VLZ4
160
4V
LZ
4
52. To Aux 1 and To Aux 2Ifyouwanttoaddreverbordelaytothestage
monitormixes,thesearetheknobsforyou. Operatingindependentlyoftheirrespectively numberedstereoreturns[51]levelcontrols,theseknobsareexactlythesameasthechannelstrip aux1[34]andaux2knobs.
Thesetwoknobsfeedstereoreturnsignalstotheirrespectiveauxsend[6]outputs:
Toauxsend1feedsstereoreturn1toauxsend1master,and:
Toauxsend2feedsstereoreturn2toauxsend2master.
Theyareoffwhenturnedfullydown,deliverunitygainatthecenterdetent,andcanprovideupto15dB ofgainturnedfullyup.Stereoreturn3and4havenosuchknobs.
53. Main Mix To Subs (Stereo Return 3)Withthisswitchup,stereoreturn3behaveslikeall
theothers—itdeliversastereosignal,regulatedbyitslevelknob,tothemainmix.Whenyouengagethisswitch,thesignalsareremovedfromthemainmixbusesandsenttothe1-2/3-4switch,whichdivertsthesignaloncemore.We’renotfinished.Pleasereadon.
54. 1–2/3–4 (Stereo Return 3)Ifthemainmixtosubs[53]switchisdisengaged,
thisswitchdoesabsolutelynothing.Let’snowassumeit’sengaged.Stereoreturn3’sstereosignalwillnotbesenttothemainmix,buttosubgroupfaders1and2(thisswitchup)orsubgroupfaders3and4(thisswitchdown).
Let’ssayyou’vemadeastereodrumsubmixon subgroupfaders1and2,soyoucanridethosetwo fadersinsteadofthesevenchannelsthatthedrumscamefrom.Subgroupfader1hasitsassigntomain mix[39],leftbuttonengagedandsubgroupfader2 hasitsassigntomainmix,rightbuttonengaged, blendingthedrumsubmixbackintothemainmix. Thedrumchannelsarealsosendingsignalstoyourreverbviatheauxsends[6],andthereverboutputs arepatchedintostereoreturn3[7].Sofarsogood.
Eventhoughyoucouldsendstereoreturn3directlytothemainmix(mainmixtosubs[53]switchup),youdon’twantto.Instead,engagethemainmixtosubsswitchandmakesurethe1–2/3–4switchisup.Nowthereverbreturnwillbeblendedintothedrumsubmix,andasyouridethosetwofaders,thereverblevelwillfollow.
Whydowewantthat?Becauseifyouhadjustsentthereverbdirectlytothemainmix(mainmixtosubsswitchup)andyoudidadrumfade-outusingsubgroupfaders1and2,the“dry”signalswouldfadeout,butthe“wet”signalswouldkeeponsinging.Allyouwouldhearisthedrumreverb(the“wet”),andnoneoftheoriginaldrumsignals(the“dry”).That’sbecausethereverbisbeingfedbythechannel’sauxsends,andtheyhavenoideathatyou’vepulleddownthesubgroupfaders.That’swhywethrewintheseswitches,phew!
51
51
52
53 54
55 56
49
50
25Owner’s Manual
Ow
ne
r’s Man
ual
55. CR/PH Only (Stereo Return 4)Onceagain,thedefaultforallthestereoreturnsisto
feedthemdirectlyintothemainmix.You’vejustlearnedabouttheoptionalexceptionsinvolvingstereoreturn3.
Stereoreturn4alsohasanoptionalexception:Byengagingthisswitch,youwillremovestereoreturn4’sstereosignalfromthemainmixandsenditdirectlytotheCR/phonessource[42]matrix.Itmattersnotifanyofthesourcematrixswitchesareassigned,butitwillbeinterrupted,asusual,ifasolo[27]switchisengaged.
Let’spretendyou’redoingalivemixtoa2-trackdeck,ahousePA,orboth,andyouwanttoplayalongtoaclicktrack.Youcouldruntheclicktrackdirectlyintothemainmix,butyoudon’twantthemixdowndeckand/oraudiencetohearit.Bygum,thisistheswitchforyou.Similarly,itcanbeusedforvoice-overtracks,narration,anythingyouwantheardbytheengineerandplayersbutnotbytheaudienceandmixdowndeck.
56. Returns Solo and LEDThisswitchoperatesjustlikethechannelsolo[27]
switches—engagingitsendssignalstothecontrolroom,headphones,andmeterdisplay,andinterruptswhateverhappenedtobetherebeforeyousoloed. Itfollowsthemode[44]switchsettingaswell. Theonlydifferenceisthatwhenyouengagethis returnssoloswitch,itsendsallfourstereoreturnssignalstothesolocircuit.
Assumeyouwanttosolothesnaredrum.Hitthatchannel’ssoloswitch,andyougetthe“dry”(noeffects)snareonly.Thathelps,butyouwanttohearitwiththereverbyouhavepatchedintoastereoreturn.Leavingthatchannel’ssoloswitchengaged,alsoengagethereturnssoloswitch,andnowyou’llgetthedrysnare anditsreverb.
Sinceitisaglobalfeature,you’llalsogetthesignalsfromalltheotherstereoreturns,sotheremaybesomesoundsthatyoudidn’twanttohear.Iftheyoffendyoursensibilities,simplyturndownthelevelsofthestereoreturnsyoudon’twanttohear,ormutethechannelsfeedingtheunwantedsignaltotheeffectsdeviceyou dowanttohear.
Congratulations!You’vejustreadaboutallthe featuresofyour1604VLZ4.You’reprobablyreadyfor acoldone.Goahead.Therestofthemanualcanwait.
26 1604VLZ4
160
4V
LZ
4 Appendix A: Service InformationWarranty Service
Ifyouthinkyour1604VLZ4hasaproblem,pleasecheckoutthefollowingtroubleshootingtipsanddo yourbesttoconfirmtheproblem.VisittheSupport sectionofourwebsite(www.720trees.com)where youwillfindlotsofusefulinformationsuchasFAQs andotherdocumentation.Youmayfindtheanswer totheproblemwithouthavingtosendyourmixeraway.
TroubleshootingBad Channel
• Arethechannelsassignedtothecorrectmix(1-2,3-4,L-R)?
• Isthefaderup?
• Tryunplugginganyinsertdevicesfromtheinsertjacks.
• Trythesamesourcesignalinanotherchannel,setupexactlylikethesuspectchannel.
Bad Output
• Isthelevelcontrol(ifany)turnedup?
• Ifyou’relisteningtotheCRoutsorphonesoutputs,hasasourceselectionbeenmade?
• Ifit’soneofthemainouts,tryunpluggingitscompanion.Forexample,ifit’sthe1/4"leftmainout,unplugtheRCAoutput.Ifthe problemgoesaway,it’snotthemixer.
• Ifit’sastereopair,tryswitchingthemaround.Forexample,ifaleftoutputispresumeddead,switchtheleftandrightcords,atthemixerend.Iftheproblemstaysontheleft,it’snotthemixer.
• Unplugeverthingfromthemaininserts.
Noise
• Turnthechannelfadersandstereoreturnknobsdown,onebyone.Ifthesound disappears,it’seitherthatchannelor whateverispluggedintoit,sounplug whateverthatis.Ifthenoisedisappears, it’sfromyourwhatever.
Power
• Unplugthepowercordandcheckthefuse.
RepairForwarrantyservice,refertothewarranty
informationonpage35.
Non-warrantyserviceisavailableatafactory- authorizedservicecenter.Tolocatethenearest servicecenter,visitwww.720trees.com,click“ContactTechSupport”andselect“LocateaServiceCenter orDistributor”[3].Servicefora1604VLZ4living outsidetheUnitedStatesmaybeobtainedthrough localdealersordistributors.
Ifyoudonothaveaccesstoourwebsite,youcancallourTechSupportdepartmentat1-800-898-3211,Monday-Friday,normalbusinesshours,PacificTime, toexplaintheproblem.TechSupportwilltellyouwherethenearestfactory-authorizedservicecenterislocatedinyourarea.
Appendix B: ConnectionsBalanced XLR Input Connector
The1604VLZ4mixerhas16femaleXLRinputs. BesurethecablesarewiredperAES(Audio EngineeringSociety)standards:
Balanced XLR Input Connector
Pin1–Shield(Ground) Pin2–Positive(+orhot) Pin3–Negative(–orcold)
2
3 1
SHIELD
COLD
HOT
SHIELD
COLD
HOT
3
2
1
Balanced XLR Input Connector
27Owner’s Manual
Ow
ne
r’s Man
ual
Balanced XLR Output Connector
ThemaleXLRconnectorsprovideabalancedline- levelsignalthatrepresentstheendofthemixer,wherethefullymixedstereosignalenterstherealworld. Connectthesetotheleftandrightline-levelinputsofpoweredspeakersortotheleftandrightline-levelinputsofanamplifier(withspeakersalreadyattached).BesurethecablesarewiredperAES(Audio EngineeringSociety)standards:
Balanced XLR Output Connector
Pin1–Shield(Ground) Pin2–Positive(+orhot) Pin3–Negative(–orcold)
Balanced 1/4" TRS Connector
TRSstandsforTip-Ring-Sleeve,thethreeconnectionsavailableonastereo1/4"cable.Thisallowsforadirectconnectiontothechannelinputjacks.BesurethecablesarewiredperAES(AudioEngineeringSociety)standards:
Balanced 1/4" TRS Connector
Sleeve–Shield(Ground) Tip–Positive(+orhot) Ring–Negative(–orcold)
TRSjacksandplugsareusedinseveraldifferent applications:
• Balancedmonocircuits.Whenwiredasa balancedconnector,a1⁄4"TRSjackorplug isconnectedtiptosignalhigh(hot),ringtosignallow(cold),andsleevetoground(earth).
• StereoHeadphones,andrarely,stereo microphonesandstereolineconnections. Whenwiredforstereo,a1⁄4"TRSjackorplugisconnectedtiptoleft,ringtorightandsleevetoground(earth).VLZ4mixersdonotdirectly
2
1
SHIELD
COLD
HOT
3
SHIELD
COLDHOT
3
2
1
Balanced XLR Output Connector
SLEEVE
TIPSLEEVE
TIP
RING
RING
TIP
SLEEVERING
Balanced 1/4" TRS Connector
accept1-plug-typestereomicrophones.Theymustbeseparatedintoaleftcordandarightcord,whicharepluggedintothetwomic preamps.
Youcancookupyourownadapterforastereomicrophone.“Y”twocablesoutofafemale1⁄4"TRSjacktotwomaleXLRplugs,onefortherightsignalandonefortheleft.
• Unbalancedsend/returncircuits.Whenwiredasasend/return“Y”connector,a1⁄4"TRSjackorplugisconnectedtiptosignalsend(outputfrommixer),ringtosignalreturn(inputbackintomixer),andsleevetoground(earth).
Unbalanced 1/4" TS Connector
TSstandsforTip-Sleeve,thetwoconnections availableonamono1⁄4"cable.Thisallowsforadirectconectiontothechannelinputjacks.BesurethecablesarewiredperAES(AudioEngineeringSociety) standards:
Unbalanced 1/4" TS Connector
Sleeve–Shield(Ground) Tip–Positive(+orhot)
TSjacksandplugsareusedinmanydifferentapplications,alwaysunbalanced.Thetipisconnected totheaudiosignalandthesleevetoground(earth).Someexamples:
• Unbalancedmicrophones
• Electricguitarsandelectronicinstruments
• Unbalancedline-levelconnections
Switched 1/4" Phone Jacks
Switchescanbeincorporatedinto1⁄4"phonejacks,whichareactivatedbyinsertingtheplug.Theseswitchesmayopenaninsertloopinacircuit,changetheinputroutingofthesignalorserveotherfunctions.The1604VLZ4usesswitchesinthechannelinsertandbusinsertjacks,inputjacksandstereoreturns.Italsousestheseswitchestogroundtheline-levelinputswhennothingispluggedintothem.
Inmostcases,theplugmustbeinsertedfullytoactivatetheswitch.The1604VLZ4takesadvantageofthisinsomecircuits,specifyingcircumstanceswhereyouaretoinserttheplugonlypartially.See“SpecialConnections”,onthenextpage.
SLEEVE
TIP
TIPSLEEVE
TIP
SLEEVE
Unbalanced 1/4" TS Connector
28 1604VLZ4
160
4V
LZ
4 Unbalanced RCA ConnectorRCA-typeplugs(alsoknownasphonoplugs)
andjacksareoftenusedinhomestereoandvideoequipmentandinmanyotherapplications.RCAplugsareunbalanced.Connectthesignaltothecenterpostandtheground(earth)orshieldtothesurrounding“basket.”BesurethecablesarewiredperAES(AudioEngineeringSociety)standards:
Unbalanced RCA Connector
Sleeve–Shield(Ground) Tip–Positive(+orhot)
Unbalancing a LineInmoststudio,stageandsoundreinforcementsitu-
ations,thereisacombinationofbalancedandunbal-ancedinputsandoutputsonthevariouspiecesofequipment.Thisusuallywillnotbeaprobleminmakingconnections.
• Whenconnectingabalancedoutputtoanunbalancedinput,besurethesignalhigh(hot)connectionsarewiredtoeachother,andthatthebalancedsignallow(cold)goestotheground(earth)connectionattheunbalancedinput.Inmostcases,thebalancedground(earth)willalsobeconnectedtotheground(earth)attheunbalancedinput.Ifthereareground-loopproblems,thisconnectionmaybeleftdisconnectedatthebalancedend.
• Whenconnectinganunbalancedoutputtoabalancedinput,besurethatthesignalhigh(hot)connectionsarewiredtoeachother.Theunbalancedground(earth)connectionshouldbewiredtothelow(cold)andtheground(earth)connectionsofthebalancedinput.Ifthereareground-loopproblems,tryconnectingtheunbalancedground(earth)connectiononlytotheinputlow(cold)connection,andleavingtheinputground(earth)connectiondiscon-nected.
• Insomecases,youwillhavetomakeupspecialadapterstointerconnectyourequipment.Forexample,youmayneedabalancedXLRfemaleconnectedtoanunbalanced1⁄4"TSphoneplug.
TIPSLEEVETIPSLEEVE
Unbalanced RCA Connector
TRS Send/Receive Insert Jacks
Single-jackinsertsarethree-conductor,TRS-type1⁄4"phone.Theyareunbalanced,buthaveboththemixeroutput(send)andthemixerinput(return)signalsinoneconnector.Seetheillsutrationbelow.
Thesleeveisthecommonground(earth)forbothsignals.Thesendfromthemixertotheexternalunitiscarriedonthetip,andthereturnfromtheunittothemixerisonthering.
Special ConnectionsThebalanced-to-unbalancedconnectionhasbeen
anticipatedinthewiringof1604VLZ4jacks.A1⁄4"TSpluginsertedintoa1⁄4"TRSbalancedinput,for example,willautomaticallyunbalancetheinputandmakealltherightconnections.Conversely,a1⁄4" TRSpluginsertedintoa1⁄4"unbalancedinputwill automaticallytiethering(loworcold)toground(earth).
Using the Send Only on an Insert Jack
IfyouinsertaTS(mono)1⁄4"plugonlypartially(tothefirstclick)intoaVLZ4insertjack,theplugwillnotactivatethejackswitchandwillnotopentheinsertloopinthecircuit(therebyallowingthechannelsignaltocontinueonitsmerrywaythroughthemixer).
Thisallowsyoutotapoutthechannelorbussignalwithoutinterruptingnormaloperation.
Ifyoupushthe1⁄4"TSplugintothesecondclick,youwillopenthejackswitchandcreateadirectout,whichdoesinterruptthesignalinthatchannel.Seetheillustrationonthenextpage.
Unbalanced 1/4" Insert Connectors
tip
This plug connects to one of the mixer’s Channel Insert jacks. ring
tipring
sleeve
SEND to processor
RETURN from processor
(TRS plug)
29Owner’s Manual
Ow
ne
r’s Man
ual
NOTE:Donotoverloadorshort-circuitthesignalyouaretappingfromthemixer.Thatwillaffecttheinternalsignal.
Direct out with no signal interruption to master.
Insert only to first click.
Channel Insert jack
Channel Insert jack
Channel Insert jack
Direct out with signal interruption to master.
Insert all the way in to the second click.
For use as an effects loop.
(Tip = Send TO effect, Ring = Return FROM effect).
MONO PLUG
MONO PLUG
STEREO PLUG
Using the Send Only on an Insert Jack
Y-cord splitter cable
VLZ4 Stereo Inputs and Returns: Mono, Stereo, Whatever
Stereolineinputsandstereoreturnsareafine exampleofourphilosophy(whichwejustmadeup) ofMaximumFlexibilitywithMinimumHeadache. Theinputsandreturnswillautomaticallybemono orstereo,dependinguponhowyouusethejacks. Here’showitworks:
Amonosignalshouldbepatchedintotheinput orreturnjacklabeledleft(mono).Thesig