Date post: | 08-Nov-2015 |
Category: |
Documents |
Upload: | peter-rampete |
View: | 4 times |
Download: | 1 times |
1)
WACS1620LM FILTER Clean-Up
1. IntroductionThe aim of this document is to describe the procedure to follow to clean-up the filter.
2. Filter Clean-up
1. Unscrew and remove the filter located under the FAN unit as per the picture below :
Unscrew to remote the filter
2. Remove the filter as per the picture below :
Remove the filter3. Clean-up of the filter in a dedicated area (Example : Outside) using two methods :3.1 Using a dry dedusting (air duster) as per the picture below :
3.2 Using a brush as per the picture below :
4. When the filter is cleaned, re-insert the filter and screw it under the FAN unit.