User Manual

Outdoor LED Flood Lights

Model: C2020-BW-50WColor: Brown

Scan the QR code to follow Shanghai Sansi

Tighten ClockwisePackaging

Plug

Remote Control

Power Cable

Adjust the Angle01

1. Take the lamp out of the box and place it down safely onto a flat and stable surface. Proceed to read the instructions thoroughly and keep them for future reference.2. Loosen the wheel screws on both sides of the lamp by turning them counterclock-wise, until the lamp can be rotated.3. Adjust the lamp to a desired angle, then tighten the screws by turning them in a clockwise direction.

Two Wheel Screws

Hole position of the mounting plate

M8 Hex Nut

Installation Plane

M8 Expansion Bolt

Fixed Lamp02

1. Adjust the lamp to a desired angle.2. Assure pre-keep expansion bolts onto the installation plane according to the holes’ positions on the lamp mounting plate.3. Use hex nuts to fix the lamp onto the plate.

Torque applied to the nut can't exceed 20N.m

Infrared Signal Receiver

1

Basic Parameter03

Attentions04

5-Year Unlimited warranty05

Basics information06

LED Floodlight90~264V 50/60Hz50W 120°5700KBrown RAL8019

Product Name :Input Voltage :Rated Power :Beam Angle :

CCT :Enclosure Color :

2

1. Please confirm the input voltage before using. Improper use of voltage may damage the product and cause safety hazards.2. DO NOT disassemble the product privately because LED module is non-replaceable.3. DO NOT turn on the power during installation.4. DO NOT let amateurs install or maintain the product, please get the work done by professionals.5. If the external flexible cable of the product is damaged, please have it replaced by its manufacturer, service agent or qualified persons to avoid hazards.

If you have any questions or concerns, please feel free to contact us via service@sansitech.us before returning the units to us.

Shanghai Sansi Technology Co.,Ltd

http://www.sansiled.com