Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Troubleshooting
Customer could check the following :
Troubleshooting (PACWE18INV)
• Turn the power off and disconnect the plug.• no presence of water in the machine• Lay the unit on the back• Remove the lid filter (fig.17).• Remove the filter and loosen the two clamps(fig. 18)• apply the new filter(fig.19). Be sure that the pawl is always put
inwards and point "A" is positioned upwards.
Troubleshooting
Troubleshooting
Troubleshooting (PACW150ECO, PACW160B, PACW160HP)
Serial number
How to read the serial number