Date post: | 16-Jan-2016 |
Category: |
Documents |
Upload: | madison-poppy-gallagher |
View: | 214 times |
Download: | 0 times |
©2004 Texas Trade and Industrial Education 1
Cosmetology
Unit Subtitle: Roller Placement
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 2
Measure for the roller
Length cannot be longer than the roller
Width cannot be wider than the diameter of roller
Measure each sub-section with the roller to be used
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 3
Smoothing Hair
Lay ends onto roller smoothly
No end wraps Use gel or wave-set as
necessary Keep ends spread out
across roller
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 4
On-Base Roller
Measure for roller Hold the hair at 110° Comb hair out from
the scalp
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 5
On-Base Roller
The roller sits directly on the base
Used in the top of the head
Creates maximum volume
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 6
Anchoring the Roller
Use a double-prong clippie
Slide clippie bottom underneath roller
Attach to the base Use only one clippie
per roller Do not clip to another
roller
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 7
Half-Base Roller
Section for correct roller size
Comb hair up at 90° Wrap ends smoothly
onto roller Use gel or wave-set if
necessary
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 8
Half-Base Roller
The roller sits half on, half off the base
Used in the crown area of the head
Creates medium volume
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 9
Off-Base Roller
Section for correct roller size
Comb hair to 45° Wrap ends smoothly
onto roller Use gel or wave-set if
necessary
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 10
Off-Base Roller
The roller sits completely off the base
Used in the nape area of the head
Creates least amount of volume
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 11
Indentation Roller
Section for correct roller size
Comb hair to 180° Roll upwards Wrap ends smoothly
onto roller Use gel or wave-set if
necessary
©2004 Texas Trade and Industrial Education Cosmetology I - Roller Placement 12
Indentation Roller
The roller sits completely off the base
There will be a flat indentation area above the roller
Used around the hairline of the head
Creates a flip