+12V Constant = Yellow
+12v Acc. Switched = Green / Black
-12V Chassis Ground = N/A
+12V Illumination = Red
+12V Dimmer = N/A
Amp Remote = N/A
LF+ = Brown
LF- = Blue
RF+ = Light Green
RF- = Red
LR+ = Green
LR- = Black
RR+= Gray
Dash Type :
Kit:Harness:Antenna Adapter: NDA
Interface Adapters): NONE
About the Vehicle
Make: NISSAN
Model: PATHFINDER
Year: 2005
In Dash Application
Wire Color Codes
Speaker Notes
Front Speaker Sizes
Speaker Adapter : NONE Factory Assembly : 4 8mm. bolts
Rear
PATHFINDERNISSAN
2005
DOUBLE-DIN
NN1491
NN03B
RR- = Orange
Speaker Adapter : NONE
Factory Assembly : 3 Phillips head screws
NOTES
Dash : 2 1/2" speakersLower Door : 6 x 9"
Speaker Sizes
Dimensions:W= 8''H= 5-1/2''D= 1-3/4''
Dimensions:W= 5-1/2''H= 4-1/2''D= 2-1/4''
NOTES
Lower Door : 6x9" Midrange
OPTIONS
Bose premium brand stereo system AM/FM in-dash 6 CD player with MP3 stereo 9 total speakers Bose premium brand speakersDiversity antenna
AMPLIFIER LOCATIONS: NONE
Rear Deck : NONE
NIS S A N2005 PATHFINDER
Images
Radio
Front speakers
Front
1. Using a PRT remove door handle panel and extract (1) Phillips screw.2. Using PRT unsnap housing panel to window control module, disconnect and remove.3. Remove panel surrounding the arm rest cup. Remove (2) Phillips screw.4. Using PRT unsnap door panel shell and lift away.5. Remove (4) 8mm bolts disconnect and remove.
1. Remove panel on left side of door release handle.2. Remove panel behind door release handle and remove (1) Phillips screw.3. Remove panel surrounding door grip cup. "Arm rest". Remove (2) Phillips head screws.4. Using PRT unsnap door shell panel, lift up and remove.5. Remove (3) Phillips head screws disconnect and remove.Notes: Speaker adapter is part of speaker.
Radio removal
Front speaker
Rear Door
1. Using a panel removal tool remove the trim around the cup holders.2. Using a panel removal tool remove the trim behind the shifter.3. Gently pry the trim panel surrounding the shifter off. Disconnect and remove.4. Gently pry off the center tray on the center of the dash above the radio, and remove 1 Phillips head screw from underneath that panel.5. Carefully pry the dash surrounding the radio off. Disconnect and remove.6. Remove 4 Phillip head screws securing the radio to the dash. Disconnect and remove.
Rear Door
1. Using PRT unsnap grill.2. Remove (4) Phillips screws, unplug and lift away.