Ducati Multistrada 1200603MF

Ducati Multistrada

Aprilia Caponord / Triumph Tiger 955i /

Kawasaki KLR 650

Adventure Bikes

605604

GPS Mounting Adapterfor Handlebar ClampDucati Multistrada 1200

Touring without a GPS unit has become almost inconceivable these days. And so now we’ve also developed a mounting adapter for the Multistrada – of course – that takes our GPS brackets. The adapter bolts onto the fork brace, positioning the navigation device perfectly in the rider’s field of vision.

620-0001

Handlebar Ends Anodised Red FinishDucati Multistrada 1200

The handlebar ends reliably prevent damage to the grips with open hand protectors.

High-grade anodised red finish.

- 2 parts (left and right)

410-0016

Handlebar Riser 20 mmDucati Multistrada 1200

With this handlebar riser for the Ducati you’ll feel the difference in your wrists and shoulders. It also lets you stand up straighter, improving your endurance and concentration when riding off-road. Put simply, this handlebar riser gives you better control over your machine.

We have specially adapted the shape of the riser to the Multistrada. At 20 mm its height makes it easy to fit without the hassle of changing or moving cables and wires etc.Does not affect the original handlebar damping.

620-5255

Ducati Multistrada 1200605604

Spoiler for WindscreenDucati Multistrada 1200

This special spoiler for the windscreen is perfect for undertaking long, fast motorbike journeys in comfort. There is a significant reduction in turbulence and wind pressure against the helmet.

It simply fits onto the windscreen, and is secured using the snap closure. When going off-road, the spoiler is easy to remove in seconds.Lockable

046-0647

Auxiliary Lights for the Ducati Multistrada 1200

Our auxiliary lights significantly improve both active and passive safety. As well as creating a clearly visible light pattern, these high-tech lamps provide much better illumination of the road ahead. The fog light ensures significantly better close range visibility in low visibility conditions. The Xenon headlight, which operates in tandem with the full beam headlight, makes night riding sheer pleasure. Available separately, but perfect as a twin-pack. Carries the E-test mark.

620-0012 Fog light left620-0014 Fog light right620-0016 Xenon headlight left

Handlebar, Lighting, Spoiler Windscreen

607606

Oil Filler Cap AluminiumDucati Multistrada 1200

Valuable protection for your Ducati Multistrada 1200 oil filler. The perfectly machined aluminium cap is titanium anodised and is unscrewed with an unusual 7mm hexagonal screw. The Allen key is, of course, included and can be attached to the key ring.

620-0018 titanium colored anodised620-0019 red colored anodised620-0020 black colored anodised620-0021 gold colored anodised

Small/Large Frame Plugs (Pair)for Ducati Multistrada 1200

These small but fine accessories close off the open tube ends at the joints on the Ducati Multistrada 1200’s lattice frame. Each made from a single piece of solid aluminium, the plugs are secured into the frame tube by a precisely fitting clamp.

The specially made, colour anodised end caps on the plugs are interchangeable and lend an elegant touch that enhances the sporty appearance of your Multistrada.

620-5190 gold anodised / small620-5191 red anodised / small620-5192 black anodised / small620-5193 titanium anodised / small

620-5194 gold anodised / large620-5195 red anodised / large620-5196 black anodised / large620-5197 titanium anodised / large

Ducati Multistrada 1200607606

Hand ProtectorsDucati Multistrada 1200For original handlebar, supplied with LED indicator set. Extremely strong and sturdy protection: Touratech hand protectors for your Ducati Multistrada 1200. Touratech GD hand protectors have proven invaluable on countless tours and rallies. We’ve incorporated our touring experience with the Ducati Multistrada 1200 into these lush hand protectors.

Features:- Sturdy enclosed plastic protective bar with mounting kit specially adapted to the Ducati Multistrada.- Touratech GD hand protectors are available in five different colours. GD hand protectors can be com- bined with our specially fitting spoilers (optional). - Combine hand protector and spoiler colours any way you like. - Create an individual look with optimum wind and weather protection. Sturdy Touratech brackets for the clutch and brake fluid reservoirs. Important: Fitted separately from the protector, directly to the handlebar on the Ducati Multistrada 1200. - A pair of arrow LED indicators with fixtures and cabling specially adapted to the Multistrada’s fairing. Tip: The indicators can also be fitted in conjunction with the auxiliary lights (see page 605). The arrow LED indicators have an E test mark. The usual flash frequency remains the same with our modification. Supplied with all parts required for fitting. Best possible protection for your hands while riding and for your Ducati’s indicators, fluid reservoirs and levers in the event of a fall.

620-5650 *black* 620-5651 *yellow* 620-5652 *blue*620-5653 *red* 620-5654 *white*You will find matching spoilers on page 125.

Crash Bar for Ducati Multistrada 1200*Stainless Steel*

Touratech’s crash bar is specially adapted for the Ducati Multistrada. Starting at the frame joints, the protective bar made of stainless steel tube with 2 mm wall thickness runs around the water pump and radiator, which means you’ll be able to continue riding your Multistrada even after a slide.

Our crash bar with its precision engineered, high stability tubing and fixings follows the lines of the Du-cati design. Perfectly integrated into the motorbike’s overall appearance, it also provides optimum protection. Exposed and expensive plastic fairing sections are safe from harm.

A cross brace towards the front of the crash bar ena-bles it to absorb large impacts and forces. Damage is therefore reduced to a minimum in the event of a fall. A special surface treatment means that Touratech’s stainless steel crash bar won’t show any signs of rust. Even after a few scratches it will stay looking good!

620-5160

Frame Plugs, Hand Protectors, Crash Bar

609608

Oil Cooler Guard, Anodised BlackDucati Multistrada 1200

The oil cooler is just as important as the radiator in the liquid cooling system: its failure could spell disaster. So better take precautions and fit the oil cooler guard. It’s chic and will help make sure the worst never happens.

620-0008

Radiator Shield, Stainless SteelDucati Multistrada 1200

The radiator is one of those parts on the bike that you don’t notice until they break. And when it does it can mean serious trouble, including a ruined engine. But how could the radiator break? It’s not very likely to happen on the road, but here our trendy stainless steel protector will still keep your bike looking cool. And off-road? There is a real danger that contact with branches or flying stones will damage the deli-cate radiators – unless you have a radiator shield.

620-0006

Engine Guard *Aluminium*Ducati Multistrada 1200

Touratech’s engine guard for the Ducati Multistrada 1200 fits neatly in the gap left by the original Ducati protectors. Made from anodised aluminium, the Tou-ratech guard is designed to blend perfectly with the original Ducati parts. Reaching from the expensive manifold to far under the engine, the sturdy Tou-ratech guard covers up these unprotected exposed areas. Dirt and stones thrown up by the front wheel will no longer splatter against your Multistrada’s engine and exhaust manifold.

620-5140

Ducati Multistrada 1200609608

Brake Fluid Reservoir Cover, RearDucati Multistrada 1200

This beautiful looking, functional cover is simply screwed onto the existing mounting points.This ensures that it is no longer so easy for anyone to remove the brake fluid reservoir cover.It is still very easy to read the level in the reservoir.

Made of laser-cut stainless steel.

620-0007

ABS Sensor Protection, FrontDucati Multistrada 1200

The ABS sensor is very important for safety – and very easily damaged. So it goes without saying that we’ve developed a protector for this component. Especially on a bike like the Multistrada that’s sure to see a gravel trail every once in a while. And you don’t need to tell a seasoned off-roader about the sort of damage flying stones can cause.

620-0005

Radiator Shield, Engine Guard

611610

Stickerset Touratech SilverDucati Multistrada 1200

Stickerset Touratech outline-cut, consists of:- 2 stickers „TOURATECH“ big for side parts- 2 stickers “Triangles” big for tank- 2 stickers „Triangles“ for tank and windshield

101-0280

Number Plate Splash GuardDucati Multistrada 1200

Any adventure bike needs a good hosing down from time to time, but better save it for the bike wash – not while you’re riding! Our splash guard protects the rear of the bike and the pillion passenger against plumes of water in the rain, and is extremely easy to fit to the number plate bracket. You’d hardly notice it looking at it – but you’ll see how well it works.

620-0002

Side Stand Base ExtensionDucati Multistrada 1200

Wet grass, soft tarmac, deep gravel – as Murphy’s Law would have it, the ground is never solid when you want to park your bike on its side stand. The standard base on the parking stand goes through soft ground like a hot knife through butter. The side stand base extension swings things in your favour – easy to fit, simple effect: the bike stays upright.

620-0009

Ducati Multistrada 1200611610

Waterprotected

Waterprotected

Tail Bag for Pillion SeatDucati Multistrada 1200

If you go for a ride on your own once in a while, our rear pannier is the perfect companion and straps to the pillion seat where it is closer to the centre of gravity. The lowdown: waterproof zips, two-part design (base plate can stay on the seat), secured via two, elastic band on the top – e.g. for gloves, tabs for extra straps, carry-straps so you can use the bag as a rucksack, and reflective trim. Dimensions (l x w x h): approx. 30 x 33 x 21 cm;Volume: approx. 20 litres.

055-1218

Luggage Plate AluminiumDucati Multistrada 1200

Such an immaculately styled bike as the Multistrada demands good-looking accessories. Our luggage plate is exactly that, while also meeting the need for maximum functionality. All kinds of luggage items can be securely strapped to the carefully crafted, laser-cut plate thanks to its numerous lashing loops.

620-0003

Tank Bag, Water ProtectedDucati Multistrada 1200

Our developers have pulled out all the stops for this one. Specially adapted to the Multistrada, this tank bag comes with a host of technical features. For example: water protected zips, a triple-compartment outer pocket with two-way zip, an organiser in the top cover with a document pocket and detachable credit card holder, straps so you can wear the bag as a rucksack, a map pocket, expandable height, and reflective trim. Dimensions (l x w x h): approx. 29 x 24 x 17/25 cm;Volume: approx. 12/18 litres.

055-1196

Sticker Set, Luggage Racks, Bags

613612

ZEGA Pro Topcase Rack / Luggage RackDucati Multistrada 1200

You don’t need any great mechanical skills to fit our Topcase rack to the standard luggage rack. The Topcase itself is even easier to attach. With our ingenious RapidTrap mounting system, the Topcase quickly “clicks” on or off. The Topcase is lockable and it can also be locked to the rack. Available in anodised natural aluminium or ano-dised black (»And-black«) finish.

620-0010

Complete Pannier Rack SystemDucati Multistrada 1200

The Multistrada also needs a fully fledged pannier system for grand touring, and here it is. We have modified the tried-and-tested Touratech pannier rack – made from stainless steel, of course – to fit the Ducati’s mounting points. There is a choice of 31-litres or 38-litres ZEGA Pro panniers. These are available in a natural aluminium or anodised black (»And-black«) finish.

051-0180

optional

optional

Ducati Multistrada 1200613612

ca. 89cm

31

ca. 97cm

38

BEST BRAND 2011

Winner in the category luggage systems/panniers

Touratech

Sieger in der KategorieGepäcksysteme/Koffer

ZEGA Pro Aluminium Pannier SystemDucati Multistrada 1200The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been perfor-med in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Alumi-nium pannier system, premounted.

Delivery schedule of the system:2 aluminium panniers ZRHS Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware

Dimension: total width when fitted - about 97 cm

052-3804 38 litres052-3805 *And-S* 38 litres052-3806 *And-Black* 38 litres

Delivery schedule of the system:2 aluminium panniers ZEGA Pro 31 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware

Dimension: total width when fitted - about 89 cm

052-3801 31 litres052-3802 *And-S* 31 litres052-3803 *And-Black* 31 litres

Aluminium Pannier Systems

optional

For more details on the ZEGA Pro panniers see page 1067 and the following.