The one resource more universities and labs rely on for what they need — everyday!

The BEST Value in GASES, EQUIPMENT, SAFETY PRODUCTS, and SERVICES for

Universities & research Laboratories

Products and Services Guide

2

Only Airgas provides complete, value-added solutionsthe purchasing decisions you make on behalf of your university department or laboratory have to help you perform at peak efficiency and accuracy, and keep your costs in line.

Partnering with airgas means you have complete access to all the gases, gas equipment, cryogenics, Mro, and safety products you need — all from one source.

You get streamlined procurement with one expert point of contact. easy, straightforward invoicing. More effective, more efficient inventory management. More savings. and more time for you to concentrate on your business.

Universities and research laboratories across the country rely on airgas every day for laboratory gas equipment, welding equipment and supplies used for maintenance and repair, safety equipment used throughout their

campuses, laboratory design services, dry ice and refrigerants, easy-to-use eProcurement solutions, and the supply chain expertise to make sure they have what they need when they need it.

aLL thegases, eqUiPMent,

safetY ProdUcts and services YoU Use everYdaY –

at a Lower totaL costYou may know Airgas as the nation’s leading supplier of gases, but we’re much more than that.

The right expertisewe’ll answer all of your questions about product availability, technical specifications, pricing and shipping. our safety specialists are committed to providing the best laboratory safety products, value and service you’ll find anywhere. with specialists located coast to coast, we’ll help you with:

• on-site surveys

• inventory control

• Product analysis

• technical support

• cost-saving initiatives

• hazard assessment

• new product information

The right locationswith more than 1,100 locations nationwide, your supplies are available whenever you need them. we’re ready to serve you from our more than 850 retail stores, branches, gas fill plants, specialty gas laboratories, production facilities and distribution centers.

airgas also distributes products and services through ebusiness, catalogs and telesales channels. our national scale and local, personalized service provide a competitive edge:

- 60% of the population served within one day

– 96% of the population served within two days

Orders received by 5 p.m. local time are shipped the same day from six Airgas Distribution Centers:

– bristol, Pa (Philadelphia)– coppell, tX (dallas/ft. worth)– duluth, ga (atlanta)– germantown, wi (Milwaukee)– hamilton, oh (cincinnati)– whittier, ca (Los angeles)

Strategically Placed Distribution Centers

3

Product and Service LocatorLaboratory and Specialty Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Pure gases gas Mixtures special applications gases

Specialty Gas Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 regulators change over Panels Purification Panels gas generators gas detectors

Gas Delivery Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 cylinders Microbulk/dewars bulk

Life Science Products and Services . . . . . . . . . . . . . . . . . . . . . 12-15 freezers gas Management systems cryorepositories Personal Protective equipment (PPe) system design services Maintenance Programs

Laboratory Safety Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 eye/face Protection hand Protection first aid facility Maintenance respiratory and instrumentation Protective clothing

Dry Ice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Packaging

Refrigerants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21 supply Modes recycling

Safe-T-Cyl™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23 Lecture bottle replacement

Industrial Gases and Welding Equipment . . . . . . . . . . . . . . . . . 24-25 gold gas® shielding gases Precise-Mixture gas blends welding and cutting equipment Metal fabrication automation

Welding and Cutting Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 filler Metals welding support Mro supplies

eProcurement Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-29 seamless integration

Laboratory Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31 analytical Labs Life science Labs

OUTLOOK® Managed Services . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33 supply chain Management solutions airgas inventory Management (aiM™) Program on-site surveys

Airgas Emergency Response Organization (AERO) . . . . . . . . . . 34-35 Largest, best in the industry

Ask for more detailscontact us today—we have the answers and can provide more details about the information presented within this resource guide.

Todd Morris vice President University and Laboratory Markets(614) 306-9797todd.morris@airgas.com

Chris Hopwood national sales Manager University and Laboratory Markets(770) 680-6906chris.hopwood@airgas.com

Sheila Boyle national sales Manager University and Laboratory Markets(610) 984-5861sheila.boyle@airgas.com

Visit our website at: www.airgasunivlabs.com

4

airgas has the technical know-how and national presence to meet your needs for high-purity gases and precision blends, whether you manage a single facility or multiple sites across the country.

airgas has the industry’s largest network of laboratories, filling locations, and service locations nationwide. it includes nine national and more than 60 regional specialty gas labs, two equipment centers, and one research and development center. approximately two-thirds of airgas specialty gas labs are iso 9001 registered and three are also iso/iec 17025 accredited. Meeting the highest standards for quality management is important to us because it is important to our customers.

airgas engineers developed a totally computerized and automated high-tolerance specialty gas filling system so you get precise, quality gas mixtures every time. called acugrav™, this proprietary system is in place at all airgas specialty gas filling locations so you’re assured of getting gases you can rely on—

every time.

The National Institute of Standards and Technology trusts Airgas — so can youthe national institute of standards and technology (nist) selected airgas to provide the standard reference Materials (srMs) gas mixtures used worldwide. nist srMs are the yardstick by which all other gas mixtures are measured.

High-performance gases for demanding applications

sPeciaLtY gases froM airgas

Airgas AcuGrav™ technology is a quantum leap in specialty gas filling. This

major breakthrough by Airgas engineers totally computerizes and automates the

multi-component specialty gas filling process providing you with gas mixture consistency,

precision and peace of mind.

5

Analytical Gases

• biP® technology

• flame ionization

• electron capture

• Leak detection

• nuclear counter

Environmental Monitoring

• ePa instrumental test Methods

• ePa Protocols and traceability standards

• ceM daily calibration standards

• non-ePa Protocol calibration gases

• certification Periods

• certificates of analysis

• air toxics Monitoring

• Mobile emissions Monitoring

Airgas LaserPLUS™ Gases

Medical Gases & Biotechnology

Refrigerant Gases

Hydrocarbon Processing Gases

Airgas Safe-T-Cyl™ Lecture Bottle Replacement

Portable Cylinders

Process Chemicals

And the right supply modes …from high-pressure and low-pressure gas cylinders, portable liquid dewars, and stationery liquid Microbulk tanks to on-site tube trailers and liquid bulk tanks, you can count on airgas to meet your gas supply needs safely and reliably.

Pure Gases

acetyleneair ammonia argon boron trichloride boron trifluoride 1,3-butadiene n-butane1-butene2-butenes2-butene (cis) 2-butene (trans) carbon dioxidecarbon Monoxidechlorine dimethylamineethane ethyl chloride ethylenehalocarbon-116halocarbon-14halocarbon-134ahalocarbon-218halocarbon-22

halocarbon-23halocarbon-c318halocarbon-1216helium hydrogenhydrogen chloride hydrogen sulfideisobutaneisobutylene KryptonMethaneMethyl chloride Monomethylamineneon nitric oxidenitrogennitrous oxideoxygen Propane Propylenesulfur dioxide sulfur hexafluoridetrimethylamine Xenon

Gas Mixtures(Minor component mixture in a balance of Nitrogen or other balance gas)

ammonia argonbenzene n-butane carbon dioxide carbon Monoxide chlorine ethane ethyleneethylene oxide fluorine Mixtureshelium hexane hydrogenhydrogen chloride hydrogen sulfideisobutaneMethane nitric oxide nitrogennitrogen dioxidenitrous oxide oxygen PropanePropylene sulfur dioxidesulfur hexafluoridetoluene vinyl chloride

We have the specialty gases you need …

Specialty Gases and Equipment Product Reference Guide

Engineering the Right SolutionsSpecialty Gases and Equipment

For gases information, call Toll-Free 1-877-ASG-4-GAS.

For specialty gas equipment information, call • United States: 1-800-939-5711• International: 011-864-322-8807 option 2

Or, visit us online at www.airgasSGcatalog.com

© 2012 Airgas, Inc.MCM-055Printed in the U.S.A.

Request your copy of the Airgas Specialty Gases and Equipment Product Reference Guide, or go to www.airgasSGcatalog.com

6

our dedicated staff of laboratory and specialty gas equipment technicians is focused on providing the right equipment and custom-systems solutions for your specific needs. from analytical pressure regulators (general-purpose, high-pressure, and special service), change over panels and accessories, to gas generators, manifold assemblies, flow meters, pressure gauges, valves, pigtails, hoses, and more …

you’ll find it with Airgas.

The best high-purity point-of-use equipmentthe equipment that comes in contact with your gas stream has a direct impact on the consistency of your laboratory performance. You can rely on airgas to help you get the most out of your laboratory processes.

we design custom gas management systems specifically for specialty gases, process chemicals, and industrial applications using flammable, toxic, corrosive, high-purity, high-pressure, and high-flow systems.

we also provide complete project management with an emphasis on safety, incorporat-ing fully automated gas cabinets, gas detection and monitoring support systems, plus back-up safety systems.

whether your gas is delivered in high-pressure or low-pressure cylinders, liquid cylinders, Micro-bulk or bulk, airgas has everything you need to get the gas to every point of use—quickly, safely, and free of contaminants.

and if you want to generate your own gas, we’re happy to advise which gas generator is appropriate for your processes. You can choose from hydrogen, helium, nitrogen, or zero air generators.

High-performance equipment for demanding applications

YoUr one soUrce forLaboratorY gas eqUiPMentand gas deLiverY sYsteMs

Flexible hoses, fittings, chromatographically cleaned tubingairgas carries a complete line of flexible hoses and fittings for your gas delivery systems.

we offer cga (compressed gas association) fittings in all types of materials with a check valve incorporated into the nose. this prevents large amounts of air from entering your system when changing cylinders and is a critical component to assuring consistent results from your gas chromatograph.

airgas also has chromatographically cleaned tubing in coils and sticks, in both copper and stainless steel. this is the correct type of tubing you need to build any system for gas chromatography or other analytical applications.

Changeover Manifoldsairgas offers a wide range of changeover manifolds for all analytical, life science, LcMs, icP, and other high- purity applications, as well as for co2 lasers. we’ll help you select the right manifold for your application and budget.

airgas manifolds have many different features that differentiate one series from another. all are specially cleaned for all of your analytical or life science applications and are designed for years of worry free performance.

all manifolds have high-purity, leak-tight flexible pigtails with check valve cylinder connections that prevent air from entering the system during cylinder change outs. our manifolds can have alarms installed at the factory or can easily be added in the field to provide visual, as well as email notifications of when the system switches from one active bank to the reserve or if one bank depletes unexpected. all manifold components are of a bar stock body construction, and have stainless steel diaphragms.

Excess-flow valves, check valves, safety relief valves, flash arrestors, tee purges, needle valves, diaphragm valveswe carry every type of valve required by code, as well as any valve you might need for your gas delivery systems.

excess-flow valves should be on every flammable, toxic, corrosive or poison gas system to prevent large amounts of gas from escaping and causing a catastrophic event.

we offer shut-off valves in needle and packless diaphragm design, as well as check valves and flash arrestors in all materials.

All of our valves are in stock and ready for same-day shipping.

Visit our website www.airgas.comSGcatalog.com to view our complete laboratory gas equipment offering. Follow the link on the website to contact your local specialty gas specialist, or call Toll-Free 800-939-5711

Cylinder storage and restraintsairgas offers a complete line of cylinder restraints, stands, and racks in metal and composite materials. we’ll help you decide the most cost-effective way to store cylinders and comply with nfPa (national fire Protection agency) and local codes.

Cylinder Cartsairgas has a complete line of cylinder carts to help you safely move gas and liquid (dewar) cylinders around your facility. our dewar carts are specifically designed to enable one person to easily move a dewar without the risk of back injury.

Gas flow control metersfrom mass flow controllers to electronic flow meters, airgas has what you need. we’ll recom-mend the right solution for your gas and your specific flow requirements. we’ll even design a system so you can monitor or control gas flow from a remote location.

7

8

airgas and Parker have partnered to provide the most comprehensive portfolio of gas generators to meet your requirements for gas, purity and flow. we have the most complete line of hydrogen, zero air, and nitrogen generators for all of your analytical applications, as well as specific units for Lc/Ms and other application specific generators.

airgas gas generators use membrane, Psa, and catalyst technologies to generate research-grade gases. we offer hydrogen generators in both carrier- and fuel-grade purity. nitrogen generators are designed to continually transform standard compressed air into commercially sterile nitrogen at safe, regulated pressures without

operator attention. hydrogen generators eliminate hazardous hydrogen storage. Zero air generators are ideal for fid applications and allow instrument users of high volumes of zero air to economically produce zero air.

Airgas generator portfolio includes:• hydrogen

(for both carrier and fuel)

• Zero air

• nitrogen

• fid gas stations

• ft-ir purge gas

• toc

• icP spectrometer nitrogen

Visit our website www.airgasSGcatalog.com to view our complete offering, or call us Toll-Free: 800-939-5711

You’ll find a wide variety with Airgas

the best aLternative for cYLinder gasesgas generators

9

nanotechnology could quite possibly be the gateway to science’s greatest innovations. breakthroughs in nanotechnology are already credited with creating new and better products, such as sunscreens, stain- and wrinkle-resistant clothing, scratch-resistant coatings,

antibacterial bandages, and much more. whether you’re working on a specific nanotechnology research and development project or building a complete nanotechnology center, you’ll find airgas has the right gases, gas delivery systems, and expertise to help you and your work succeed.

Specialty gas cabinetsnanotechnology requires ultra-high purity gases (UhP) and very precise gas delivery systems. airgas has a complete line of gas cabinets, from manual to fully automatic. we’ll make sure your gases are stored in the correct type of enclosure with the proper controls based on the classifications of gases used.

airgas automated gas cabinets are among the safest and most reliable UhP gas equipment available. our flexgas™ cylinder gas cabinets accommodate up to four high-purity gases with manual gas panels for each gas. and our ciphercon™ automated gas cabinets’ modular design allows us to customize them to your exact needs.

Gas panelsairgas MicroLine™ and symplicitY™ auto-switchover panels for UhP specialty gases are a must for any gas distribution system within a nanotechnology environment. they’re ideal for automatically switching from cylinders or dewars to backup cylinders or dewars. You can program the switchover based on low pressure or weight. a conveniently mounted status center with our symplicitY™ panels house a PLc display and control touchpad.

Expertiseif you’re not sure what local codes or regulations apply to the gases you need, the quantity and types of gases you can have on site, and what safety features you need, airgas can help. our specialists are thoroughly trained and experienced in helping our nanotechnology customers design and manage their gases and gas delivery systems.

Gases, gas delivery systems, and expertise

ProdUcts and services fornanotechnoLogY

airgas maintains complete versatility in gas delivery options to make sure you get exactly what you need. we’ve created the industry’s best supply modes and supply chain so you not only get what you need, but we deliver it exactly where and when you need it. from high- and low-pressure cylinders, and liquid cylinders/dewars to microbulk and bulk, you’ll find it with airgas.

Cylinderswe have nearly ten million cylinders in circulation supporting customers’ needs. high-pressure cylinders for argon, oxygen, nitrogen, helium, hydrogen, and airgas gold® gas —mixtures for welding shielding applications—are available in sizes from 20 cubic feet to over 300 cubic feet. Low-pressure cylinders are available for propane, propylene and other fuel gases. Laboratory specialty gases are available in high- or low-pressure, depending upon the gas.

Liquid cylinders/dewarsif you use large numbers of cylinders, you may consider liquid cylinders as a more efficient supply mode. these vacuum-jacketed containers hold liquefied gases and are designed for reliable, economical transportation. Liquid cylinder capacity is measured in liters. the most common delivery sizes are 160, 180, and 230 liters. delivery pressures range from 22 Psig up to 320 Psig.

Bulk and MicroBulkfor the highest-volume gas users, bulk deliveries provide the most cost-effective solution. airgas bulk tanks are installed at the customer’s site and regular bulk-truck deliveries are scheduled. typical bulk and micro-bulk gases include nitrogen, oxygen, argon, helium and carbon dioxide.

Proven delivery systems for every application and location

a fULL range of

gas sUPPLY Modes

10

11

it’s always best to consult your airgas representative about the packaging, delivery, and storage of gases. the following information provides delivery mode guidelines based on gas usage during a one-week time period.

in addition to cylinders, liquid cylinders, Microbulk, and bulk deliveries, airgas also provides tube trailers and other high-pressure ground storage solutions.

Determining the Best Supply Mode

Up to 300 cubic feet of gas Up to 5,000 cubic feet of gas

Up to 50,000 cubic feet of gas

Up to 60,000 cubic feet of gas

Liquid cylinders contain large volumes of liquefied gas.

with Microbulk

delivery from airgas, liquefied gas

is delivered into Perma-cyl storage vessels and then

transported or piped to the point of use.

airgas provides customers with

bulk gas systems that fit their needs,

their schedule, and their cost-

saving goals.

Cylinders

Dewars

MicroBulk

Bulk, Tube Trailers (“Merchant”)

12

Complete cryogenic solutions for medical and biopharmaceutical research

airgas engineers the right soLUtions forLife sciencesFrom cryogenic storage systems and liquid

nitrogen to vacuum-insulated piping and

redundant monitoring and alarm systems,

Airgas is the one source for advice and

support for protecting irreplaceable biological

and clinical samples.

Cryogenic repository systems• custom cryorepository systems

• Liquid nitrogen supply

• expandable viP supply lines

• remote monitoring and data logging

• technical support

Total Integration ApproachLong-term, secure storage of biological materials is a critical challenge faced by institutions in the life science and healthcare industries. all too often, storage requirements outgrow the capacity of the facility. systems become a mixture of components that are difficult to maintain and validate. building a new system demands large capital outlay and requires valuable personnel

time to commission, operate and monitor the equipment.airgas offers a proven and cost-effective solution: total system integration. from engineering and design through installation, main-tenance, monitoring and validation, airgas provides customers with technologically advanced on-site or off-site cryorepository facilities specifically tailored to both current and future storage requirements.

You are assured of having a fully validated, state-of-the-art facility that has the potential to grow with your storage needs. best of all, the facility is monitored on a 24/7 basis and all critical data, including storage temperature and liquid nitrogen levels, are logged. in the event of a failure, long duration hold times and redundant backup systems are designed into the facility. the result of airgas’ total system integration is a solution that reduces risk and anxiety associated with the long-term storage of critical biological materials at cryogenic temperatures.

Protect your frozen assets.

VACUUM-INSULATED PIPING

PERMACYL CRYO-STORAGE

CONTROL RATEFREEZER

WORKING FREEZER

HIGH-EFFICIENCY CRYO-STORAGE TANKS

O2 DEFICIENCY ALARM

ON-SITE DATA ACQUISITION

EXTERIOR LN2 FILL BOX

SHIPPING STATION

COMPLETE MONITORED MAINTAINED SYSTEM

13

Your one source for Cryogenics, Eguipment, Services and Support

Custom floor plans are designed to maximize floor space utilization

• new facility planning, design and engineering

• installation and commissioning of system

• Low-touch operation• validation• Preventative maintenance and

complete system warranty• automatic Ln2 supply

management• 24/7 temperature monitoring

and data logging• emergency response• total project financing (optional)• Procedure and staff training

Total System Integration Includes:

Manufacturingnitrogen, oxygen, air, process chemicals

Gas Chromatography/GCanalytical pure and high-tolerance specialty gases for Ms, icPMs, icP, and fid

Nuclear Magnetic Resonance/NMRhelium and nitrogen cryogens, cryogen handling equipment

Additional Researchnitrogen for electron microscopes, oxygen for fermentation safe-t-cyl™ lecture bottle replacement

Glove Boxesnitrogen and argon supplied in bulk, Microbulk, or dewars

Mechanical and Other Storagebackup cryogen systems using nitrogen or carbon dioxide, supply mode changeover equipment, dry ice, scales

Liquid Nitrogen/LIN Storagenitrogen supplied in bulk, Microbulk, or dewars; cryogen handling equipment; refrigerators, freezers, and inventory rack systems

Liquid Chromatography/LChelium purge gas, solvents

14

You’ll find it all with Airgas

crYogenicstorageand safetY soLUtions

CryoCarts are designed for easy loading of biological samples into canes, boxes, racks, or frames. approximate temperature hold time with the lid in place is 18 hours.

Mid-range Capacity Storage provide optimum storage capacity for vials and boxes. designed for minimal consumption of liquid nitrogen.

Here are just a few of the storage solutions you’ll find with us ...

You’ll find safety equipment and accessories like these – and a whole lot more – with Airgas ...Cryo Gloves protect your hands and arms from cryogenic liquid splashes—not for immersion in cryogenic liquids and other ultra-cold environments.

Cryo Aprons provide full frontal protection from cryogenic splashes and contact with cold surfaces. adjustable at the neck and waist for a comfortable fit.

Liquid Nitrogen/ LN2 Sticks are a simple, effective way to measure the non- visible level of liquid nitrogen in a vessel. simply insert it into the container then rapidly wave it in the air to allow frost to form on the stick, indicating the liquid level in the vessel.

Faceshields offer both splash and impact protection. ratchet headgear adjusts quickly for a comfortable fit. clear shields are easily replaced.

Cryo Claw is the safe, easy way to extract vials or boxes from the bottom of cryogenic vessels. fits vessel openings as small as two inches.

CryoCube™ is the right cryogenic shipping solution for your biological samples. it charges in less than an hour and is the perfect dry shipper because it keeps your samples at -105°c for up to five days.

15

From Gases and Cryogenics to Components and Complete Systems ...Airgas has what you need to store and protect your valuable samples

Airgas also delivers peace of mind

Regulatory ComplianceBest Practices

increased governmental regulation requires primary and secondary data recording and documentation that biological material has been stored at appropriate temperatures over time. Multiple level alarm systems, redundant data monitoring and recording are standard features of the airgas total system integration.

Reduce RiskProtect Your Work

reduce the risk to your cryopreserved materials. the security of liquid nitrogen supply, the reliability of high-efficiency storage units, and the reassurance that critical data is monitored and recorded on redundant systems in real-time add up to the longest hold time in the industry.

SimplifyLow-Touch Systems

airgas’ low-touch systems allow your staff to better manage their time and resources. systems are fully maintained and monitored by airgas, allowing your staff to concentrate on their area of expertise.

Preventive MaintenanceProactive, Not Reactive

as part of the standard airgas cryorepository offering, all preventive maintenance is included. as with all equipment, freezers require maintenance and calibration. over time, parts wear and ice builds up. regular maintenance and cleaning keeps systems operating efficiently and effectively.

Monitoring airgas cryorepositories are monitored in real-time and all data is stored automatically for audit purposes. system status displayed locally on-site. all vital signs are monitored on redundant and independent systems:

• Liquid nitrogen supply levels

• cryo-storage unit temperatures (top and bottom)

• cryo-storage unit liquid level

• data is stored on-site

• alerts are sent via pager, email, and telephone

Liquid Nitrogen Tanksstorage tanks can be located either inside or outside the storage facility.

• remote filling—reducing disruption to your facility and to lab personnel

• airgas offers a range of vessels including small portable dewars to large storage systems

• telemetry assures no product run-outsReduces staff hours spent on non-core activities

Vacuum-Insulated Pipingvacuum insulated piping system is designed with extra drops and bayonets for easy expansion as the need arises.

• Multiple drops and bayonets permit uncomplicated facility expansion

• Low heat gain and low pressure drop design reduce liquid nitrogen usage

• designed for overhead installation to eliminate the clutter of hoses

• hot gas bypass valve is vented to the exterior through a stainless steel vent system

Eliminates the ‘hodge podge’ look and feel of homegrown systems

Proves samples are kept cold

16

airgas has more than 400 safety specialists who are among the most knowledgeable people in the industry. and, because of our partnership with leading safety products manufacturers, airgas has easy access to the latest technical information, product specifications,

support and training. whatever your question or need, you’ll find the right person and the right solution at airgas. with six distribution centers, more than 850 stores, more than 400 safety specialists, and over 30,000 safety products, airgas is positioned to be your single-source supplies

for all your safety equipment needs. from safety glasses and personal protective equipment to custom safety signs to support training and area protection, wwe have the safety products and expertise to keep your facility safe and in compliance.

The right people with the right solutions

safetY ProdUcts and eXPertise

17

The ONE place that commercial and research laboratories find all of these leading safety brands and more

Hand Protection• disposables

• chemical

• specialty

First Aid• Kits

• biohazard

• burn care

Facility• Matting

• signs and information

• spill control and containment

• flammable storage

Respiratory and Instrumentation• disposable respirators

• Powered air-Purifying respirators

• gas detectors

Eye/Face Protection• eyewear

• goggles

• eye/facewash

• faceshields

Protective Clothing• disposable

• coveralls

• Lab coats

• bouffants and booties

We offer the broadest range of safety products, including:

18

About CO2 and Dry Iceco2 gas is inert, colorless, odorless and tasteless and it is a part of the earth’s natural atmospheric make-up. airgas does not originate co2; instead airgas recycles co2 that comes from the earth, refineries or exhaust streams by cleaning the gas and making it into a safe quality product for medical, food and beverage use. cleaning co2 is good for the environment and airgas

provides safe products both in a liquefied and solid form.

dry ice is created by compressing liquid co2 under extreme pressure forming a solid shape which can be made in many sizes by extruding or cutting. dry ice has a cooling property of approximately 245 btU’s per lb. or -109°f. the properties of dry ice make it 1.5 times denser than air, cools at five times the rate wet ice and used in applications where super

cooling is required. because dry ice is compressed gas, a natural process called sublimation occurs during the refrigeration process converting the solid form back into a gas. this clean coolant process is effective and eliminates most of the disadvantages associated with alternative solutions.

if you’re looking for dry ice, you’ll find it with airgas. as the largest supplier of dry ice, airgas has established a series of production plants across the nation to develop a secure supply source. distribution branches are located in strategic locations throughout the country to provide service to key industries including universities and labs. quality, reliability and service are the key drivers that enable airgas to grow with organizations who depend on dry ice and cold shipping supplies.

dry ice is used in many areas: shipping, experiments, preservation, specimens, shrinking, cleaning and freezing. airgas offers other products like gel packs and cold shipping containers that are used in conjunction with dry ice to maintain temperature integrity. call airgas today at 1-877-ice-now1 or visit our website at www.airgasdryice.com.

Largest U.s. sUPPLier of

drY ice

19

About Cold Shipping Containers and Gel Packsdry ice used in conjunction with special cold shipping boxes and gel packs extend the shipping time for special needs. cold shipping products come in a variety of different sizes for all types of applications. each cold shipping container is sized with the correct wall thickness and special tolerances for lids to extend the coolant time. custom cardboard boxes are designed to provide an extra layer of protection and cooling factor for the cold shipping boxes.

airgas gel packs are non-toxic and come in different sizes depending on each application. Purchasing cold shipping products through airgas reduces the minimum order requirements, reduces damages, cuts down on losses and reduces shipping costs.

For all your refrigerated solutions call 1-877-ICE-NOW1

or visit www.airgasdryice.com

Blasting and Cryo Pellets

Model HR04PModel HR11P2-LC

Cut Block Standard and Rice Pellets

Whole BlockAirline CutHalf Cut Block

20

in addition to airgas’ complete line of industrial and medical gases, airgas is the leading supplier of refrigerant gases in the U.s. from a nationwide network of stocking points, airgas maintains the widest selection of refrigerants, used for air conditioning and refrigeration applications, including automotive

air conditioning. our supply includes all refrigerants types, such as r-22, r-410a, r-134a and much more. as a major customer of the four major refrigerant chemical manufacturers, airgas also carries all the newly developed, next-generation refrigerant alternatives commercially available

today. these include r407a and r-438a. all are available in standard industry cylinder sizes for next-day delivery.

When you think refrigerants, think Airgas

airgas..... KeePing higher Learning cooL

Under the guidelines of the clean air act, today the air conditioning and refrigerated industries are facing the challenges of a world-wide phase-out of the production of hcfc refrigerants. this includes r-22, the most widely used refrigerant worldwide.

airgas is committed to the refrigerant industry and has developed the most comprehensive refrigerant recycling and reclamation programs available, which support the effects of this unprecedented production phase-out. to further support our commitment, airgas currently owns and operates two state-of-the art reclamation facilities for the recycling of refrigerant gases to restore them to industry standard specification ahri-700. additionally, airgas has invested in the development of reclamation equipment using the most advanced technologies, providing the capacity to recycle several millions pounds of used refrigerants per year.

airgas is dedicated to preserving the future supply of r-22 as well as other refrigerants already phased-out by ePa regulations. these include such refrigerants as cfc’s r-11, r-113, r-114, r-500 and r-12, all currently available from airgas. today airgas buys all used refrigerants from the industry for reclamation and our programs and offers for buy-back, banking, process and exchange are second to none.

refrigerant supply and reclamation are not all airgas provides the hvacr industry. our patented rPs equipment is a high-speed, transportable reclamation unit which can reclaim refrigerants on-site at speeds of 2,700 pounds per hour, returning refrigerants that meet or exceed the ahri-700 standard. certified airgas field technicians also provide dehydration and flushing services designed to remove moisture from any refrigerant system regardless of size or capacity.

airgas is a full-service refrigerant supplier, providing refrigerant gases and refrigerant service solutions to our customers coast to coast.

Think Airgas for refrigerants.

21

22

safe-t-cyl™ is the environmentally friendly, returnable small-volume specialty gas cylinder that puts an end to all your lecture bottle disposable concerns. it’s perfect for university and research laboratories because it’s safe, simple, good for the environment, and easy on your budget.

Lecture bottle disposal is a major concern and expense. with safe-t-cyl™, there are no disposal costs or hazardous waste concerns. airgas picks up your used safe-t-cyl™ cylinders and refills them.

Eliminate the headaches and hassles of lecture bottle replacement

airgas safe-t-cYL™

LectUre bottLerePLaceMent

Eliminate the headaches & hassles of lecture bottle disposal.

23

It’s about safetytraditional lecture bottles present a potential hazard if the valve is damaged. the unique safe-t-cyl™ valve shroud does double duty: it effectively prevents the cylinder from rolling, thereby protecting the valve from damage due to falls or impact, and the handle allows you to carry the lecture bottle safely wherever it’s needed.

It’s about cost savingsLecture bottle disposal costs range from expensive for inert gases to unaffordable for unusual or highly toxic gases. because safe-t-cyl™ is returnable and refillable, there are no disposal costs. Period.

It’s about qualitysafe-t-cyl™ has built-in flow control thanks to a specially designed valve that provides precise, consistent gas flow. safe-t-cyl™ is available with these top-quality gases from airgas:

• sulfur dioxide (so2 )

• hydrogen chloride (hcl)

• ammonia (nh3)

• chlorine (cl)

It’s about yousafe-t-cyl™ is specifically designed for lecture bottle users like you. it’s the ultimate portable system: heavy-duty durability, lightweight package and returnable for refilling. streamlined safe-t-cyl™ is safe, convenient, efficient and cost effective. You’ll save money and time with safe-t-cyl™.

and with the airgas nationwide distribution network of about 1,100 locations, you can always count on us to deliver the right gases at the right time, wherever they are

Integrated Handle –for easy, comfortable handling

Built-in Flow Control –specially engineered valve provides precise consistent gas flow

Dual-valve Design –improves overall safety with redundant shutoff

Unique Cowling –protects valve from falls and impacts

Refillable and Returnable –eliminates hazardous waste disposal costs, environmentally friendly

Switch to SAFE-T-CYL™... the environmentally friendly, returnable small-volume gas cyliner

24

Unmatched product range. Measurable savings. Versatility in delivery optionsthat sums up airgas’ position with industrial gases. we offer industrial gas products as diverse as the industries we serve. we provide attractive economies of scale because of the purchasing power of our national network. and we have proven delivery systems for every industrial gas application and location.

Gold Gas® Premium Shielding Gasesit’s the smallest cost in your welding applications. Yet the right shielding gas can have the greatest impact on your total cost. at airgas, we understand how shielding gases influence the quality of your weld, the productivity of your labor and the profitability of your business. our welding process specialists, including certified welding inspectors, will help you determine which of our seven airgas gold gas® mixes best fits your needs. and with nearly 800 airgas locations nationwide, we can produce and distribute your gold gas, whether you have one facility across the street or many facilities across the nation. it’s a unique combination of the right product and the right expertise—right where you need it.

Precise-Mixture Gas Blendersin today’s metal fabrication environ-ment, improving productivity and quality are the keys to survival and success. that’s why more and more applications requiring high volumes of pre-mixed gases are supplied with gas blended on site. airgas Microbulk or bulk deliveries are more cost effective than high-pressure or liquid cylinders. and when you use an airgas blender, mixes are more precise and consistent across a wide range of flow rates.

What you need to get the job done right

the Leading distribUtor ofindUstriaL gases and weLding eqUiPMent

25

A process we know wellairgas welding process specialists make it their job to find ways to improve your welding process and maximize cost-efficiency. Many of these specialists are certified inspectors (cwi) and/or certified welding educators (cwe), and all have accumulated years of experience on the job. that means they know the welding jobs and the challenges that you face.

Metal Fabrication Automation – The one-source solution for improving quality and profitabilitywith roots deeply imbedded in the metal fabrication industry, airgas has decades of experience providing the right solutions for fabricators’ most formidable challenges. we help customers make the right automated welding and cutting decisions so their operations run efficiently, the products they turn out are top quality, and their business is more competitive and profitable. airgas, through its advanced fabrication technologies group, provides a wide variety of solutions from process evaluations and recommendations, equipment sourcing, installation, and servicing, to complete supply chain management for gases, consumables, and safety products. our relationship with customers extends far beyond the sale and installation. we have a vested interest in each customer’s continued success and view each relationship as an ongoing partnership.

contact your local airgas representative to find out how airgas advanced fabrication technologies can help your operations.

www.airgasunivlabs.com

We know weldingAirgas is the largest distributor of welding supplies in North America. We offer the broadest range of welding power sources from the industry’s top brands.

Fume Extraction

MIG

Engine DrivesPlasma Cutters

AC/DC TIG

26

Gas Equipmentas the industry leader in packaged gases, airgas also supplies a complete range of oxy-fuel cutting, welding and brazing outfits, torches and regulators from industry leading brands such as:

replacement torch tips for all major brands including airco®, harris®, Meco®, oxweld®, smith and victor®. shielding gas kits for Mig machines ranging from 135 amps to industrial sizes. all the essential support equipment needed for oxy-fuel cutting...welding hoses, adapters and fittings, cylinder carts, cylinder wrenches, torch and spark lighters and flints.

Regulatorsour extensive offering of industrial gas pressure and flow control equipment includes:

• single stage regulators – pressure regulation recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) will not affect the performance characteristics of the work or test results

• two stage regulators – pressure regulation recommended for applications that require a constant delivery pressure over a range of decreasing inlet pressures

• flowmeters – flow regulation via a calibrated tube delivered at a constant pressure

• flowguages – flow regulation via a gauge delivered at a constant pressure

equipment is available for cylinders, high pressure, liquid, pipeline and high flow applications. regulator connections are dependent on gas type and delivery method.

Airgas is the largest distributor of welding supplies in North America and has what you need to get the job done.

everYthing for

weLdingand cUtting

27

Filler Metalsairgas offers all of the major brands and types of welding and brazing filler metals for most processes and applications. Processes – stick, tig, Mig, sub-arc and oxy-fuel gas welding and brazing

types – carbon/Mild steel, Low alloy steels, stainless steel, hard facing, Maintenance alloys, aluminum and bronze alloys

Welding Support

airgas is the leading distributor of welding and cutting equipment and supporting items.

• Plasma torches, Parts and consumables

• Mig guns, Parts and consumables

• tig torches, Parts and consumables

• tungsten electrodes, and grinders

• accessories (welding chemicals, Paints and Markers, cable, chipping hammers, Pliers, ground clamps, cable covers, etc.)

Airgas offers all major brands including Radnor®, Tregakiss, Bernard®, Tweco®, Miller, Lincoln®, Binzel®, Thermal Dyanmics® and Hypthertherm®.

MRO Supplies airgas provides custom band saw blades for all makes and models of band saws along with many other common maintenance and repair tools and consumable items used in labs and universities.

airgas provides common maintenance and repair tools and consumable items used in labs and universities such as:

• a general-purpose line of abrasives includes depressed center wheels, cut-off wheels, fiber discs, flap discs, file belts and other abrasives

• cup, wheel, and end brushes which are ideal for fast cutting in maintenance and light industrial applications

• Power tools from name brand suppliers including angle grinders, die grinders, drills and drivers

• various cutting tools such as chop saws, reciprocating saws and blades, band saws and blades, mag drills and accessories

28

airgas provides more options to accommodate the ways you do business, and offers more ways to streamline your supply chain management. at www.airgas.com, you’ll find a robust tool that gives you greater flexibility and control of the products you source from airgas.

You’ll save time browsing through our online catalog of gases, equipment, welding supplies, Mro tools and supplies, as well as safety equipment and supplies. Powerful search and filtering tools help you quickly find exactly what you need.

More ways to accommodate all the ways you do business.More ways to streamline your supply chain management.

You’ll find it all with Airgas.

get connected

with airgas

More reasons to take advantage of Airgas eProcurement solutions

• It’s FREE and EASY

• Online ordering is safe and secure with password protection and SSL encryption

• You get real-time access to your account information, including payment status, account history, customer-specific pricing, and more

• Check the status of all orders whether placed online, over the phone, fax, or in person

• Research and compare products with detailed information, including links to MSDSs and product literature

• Create a template order for handling repetitive purchases

• View cylinder balances for each type of cylinder

Flexible eProcurement SolutionsKeeping your laboratories and other university areas appropriately supplied with the right inventory can be challenging. by partnering with airgas you’ll optimize your overall purchasing process and track spending more effectively using our online tools. we’ll provide a seam-less interface with your e-Procurement system.

airgas eProcurement solutions help universities and colleges — large and small — deliver measureable cost reductions.

airgas.comPlace orders, print invoices, pay bills, track cylinder counts, review past orders, download certificates of analysis or material safety data sheets, or just research products.

airgas.com gives you complete access to your account whether you order over the phone, pick-up at the branch, or have automatic deliveries. regardless of whether you have one buyer or hundreds, airgas offers quick and easy access to tools to make doing business with airgas easier. for airgas.com questions or support, please email: eservice@airgas.com.

when you order through www.airgas.com, you receive the same pricing and service as you would with a phone or fax order.

Your order goes directly into the airgas system and to the location that regularly services your account, eliminating errors from re-keying orders. and, you get an e-mail order confirmation. airgas.com offers solutions that go well beyond online ordering. it gives you access to valuable information you can view, use to print invoices online, check whether an order has shipped, track cylinders, research products, access Material safety data sheets and much more.

eProcurement Platformsairgas has the tools to work with your eProcurement platform to automate and control your procurement process. •cXMLandOCIpunchoutcatalogs •Hostedcatalogs •cXMLandEDIorderintegration •cXMLandEDIinvoicing we work with many platforms, including ariba, sciquest, saP, oracle, exostar, Perfect commerce, hubwoo, UniMarket, infor, and quadrem. our team will work with you to determine the best system configuration to meet your business needs.

Whether your business is small, large, or you have multiple locations nationwide, www.airgas.com makes

29

30

We’ll help you solve your toughest laboratory design and gas management challenges

engineering the rightgas ManageMentsoLUtionsif you’re thinking about a new laboratory, an upgrade to an existing lab, or if you have a particular laboratory gas or equipment issue … airgas is ready to help.

our engineering team is experienced in helping universities and commercial laboratories solve their laboratory design and gas management challenges.

we work directly with architects, engineering contractors, project managers, as well as laboratory directors and managers.

Laboratory designwhether it’s designing and installing a new lab or upgrading an existing space, the airgas engineering team will work with you or your design team to plan the ideal facility. we’ll incorporate the very latest in central gas management and supply systems, as well as turn-key laboratory gas piping design and installation solutions. the best high-purity point-of-use equipment will make your laboratory efficient and effective.

Custom gas management solutionswe design custom gas management systems specifically for specialty gases, process chemicals, and industrial applications using flammable, toxic, corrosive, high-purity, high-pressure, and high-flow systems. we also provide complete project management with an emphasis on safety, incorporating fully automated gas cabinets, gas detection and monitoring support systems, plus back-up safety systems.

Airgas knows …and we’re happy to share our expertise and experiences with you.

if you’re considering a new lab or changes to an existing one, get it right the first time. take the first step by contacting us.

Todd Morris — vP, University and Laboratory Markets (614) 306-9797 todd.morris@airgas.com

Chris Hopwood — national sales Manager University and Laboratory Markets (770) 680-6906 chris.hopwood@airgas.com

Sheila Boyle — national sales Manager University and Laboratory Markets (610) 984-5861 sheila.boyle@airgas.com

For more information on what Airgas can do for you visit our website at: www.airgasunivlabs.com

Would You Know What to Do If …• gas purity is compromised or incorrectly used?

• gas supply is lost or pressure varies?

• you experience a gas leak?

• a cylinder is mishandled or cannot be delivered easily to the use point?

• gas supply modes affect the aesthetics of the facility?

• a centrally located gas supply is not used?

Cryogenic gas management systemsairgas offers design and installation services for both onsite and offsite cryorepositories. from cryogenic storage vessels and freezers to vacuum-insulated piping for liquid nitrogen and redundant monitoring and alarm systems, airgas is the one source more university, medical and biopharmaceutical laboratories turn to for expert advice and support.

Central gas supplyfor greater safety, convenience and efficiency, more and more laboratories are specifying a central gas supply. the airgas central gas supply system allows you to control the gas supply while maintaining the high quality and purity of gas from the source to the point of use.

it reduces the number of gas cylinders needed, removes them from the laboratory workplace and relocates them to a centralized controlled area where gas can be piped to multiple points of use.

31

32

buyers for universities and laboratories know that the inefficient management of cylinder gas and welding and safety products can translate into high costs and huge headaches. buying tactics that focus on price alone yield only limited success, because the underlying issues of inventory expense, logistical labor and product selection are not addressed. You know your direct costs, but how do the indirect and hidden costs associated with the

purchase and management of these products erode your bottom line?

OUTLOOK® services from airgas is the customized answer you’ve been looking for.

See what OUTLOOK® can do to save you moneyour OUTLOOK® Managed services program is a smarter supply management system that can deliver significant savings in time and dollars.

Lost assets. inefficient procurement. confusing invoices. Managing inventory on your own can be frustrating, expensive, and time-consuming. OUTLOOK® services from airgas is a complete supply chain solution for gases, welding and safety products that streamlines the whole management process, giving you more time to concentrate on your core business and realize significant savings while you do it.

airgas

OUTLOOK® Managed services

The key to saving time, money and resources

33

OUTLOOK® is customized just for youour unique approach is what sets OUTLOOK® apart from any other supply management service. our focus is on measurable solutions that squeeze the maximum productivity from every facet of the process. from ordering and delivery, to inventory control and distribution, the closer we look, the more we can help you save. what’s more, airgas can manage the entire process, including industrial, medical and specialty gases and equipment, welding hardgoods, as well as chemicals and safety equipment.

We’ll tailor an OUTLOOK® program specifically for your needs and your budget. Your program may include:•Sitesurveyandassessment•Transitionmanagement•Entry-leveltotalgasmanagement•Onsitetotalgas,equipmentand supplies management

More than just promised savings — GUARANTEED savingswe will put our savings claim in writing and address your specific service needs in detail. see how you can get started putting the benefits of OUTLOOK® Managed services program to work for you.

OUTLOOK ® Benefits and Advantagesa partial list …

•Lowerscostofownership

•Reducesinventory

•Reduceslaborcosts

•Improvesserviceand deliveries

•OUTLOOK® services also include all the benefits of aiM™ (airgas inventory Management) which typically provides:

– 30% reduction in inventory

– 95% reduction in gas-related incidents

– 90% reduction in paperwork

•Eliminatesreceivingandwarehousing

•Eliminatesannualbidding

•Streamlinespaperwork

•Improvesproducttracking

•Improvessitesafety

Our Emergency Response experts are ready to handle any Hazmat gas or cylinder emergency you may face

AirgasEMergencY ResPonseOrganiZationfire, floods, or other catastrophic events can compromise cylinder integrity, creating a volatile and dangerous situation. in disasters like these, customers can turn to airgas for immediate help with damaged or dangerous compressed gas cylinders. airgas is here to protect you and your community. the Airgas Emergency Response

Organization (AERO) is the largest and best-prepared emergency response organization in the industry. airgas has the expertise and nationwide network ready to respond to virtually any compressed gas emergency our customers face. every hazmat technician within the airgas emergency response organization is trained well beyond

osha requirements. airgas technicians are required to take an initial 40 hours of emergency response training, focused exclusively on compressed gases. this level of training means that our technicians on the scene meet the same qualification standard set for incident commanders, who manage entire response teams.

34

35

Airgas is uniquely qualified to handle compressed gas emergenciesemergencies involving compressed gases require highly specialized skills, techniques, and equipment. and the actions taken in the first five minutes are critical. nobody knows airgas products better than we do. that’s why we formed the airgas emergency response organization, comprising:

• 250 hazmat technicians across the country

• More than 25 full teams and eight satellite teams nationwide, for fast response

• the best hazmat technician training in the compressed gas industry

• aero teams drill with community firefighters and other first responders to help share knowledge

• annual re-certification of teams and technicians

• specialized containment vessels and vehicles to isolate and transport leaking cylinders safely

• expertise in dot and ePa standards for maximum safety and compliance

• chemical expertise needed to analyze and identify unknown gases and to determine proper handling and disposal methods

We’re here to help you …• Prevent injuries

• Prevent facility shutdowns

• Prevent or minimize product and property loss

• Prevent or minimize the impact on neighbors and the community

• generate good publicity and good will

we recognized an industry void in the area of emergency response. we voluntarily formed the airgas emergency response organization, without any regulatory mandate. all of the highly-trained responders in the organization are volunteers from various disciplines and levels throughout the company.

does your current supplier have the capabilities to support you and your community in emergency response related to the products they provide? instead of waiting for an emergency, now is the time to find out.

emergency response is a part of our total commitment to airgas customers.

The right people. The right expertise. Peace of mind.

You’ll find it with Airgas

Airgas and some of our key supplier partners offer the following value-added services to keep your facility safe and in compliance:

McM-333© 2012 airgas, inc.Printed in the U.s.a.

If you are interested in finding out more about the services offered above, please contact Todd Morris, VP of University and Laboratory Markets at 614-306-9797 or todd.morris@airgas.com

Is your facility compliant? Ask yourself this question: do you have a specific shut-down procedure written for each piece of equipment with more than a single energy source? if the answer is no, you are not in compliance with osha 1910.147. this standard requires all machinery with more than one energy source to have a machine-specific, written Lockout/tagout procedure. brady’s on-site Visual Lockout Procedure-Writing Service can ensure your facility has an effective lockout program and help you comply with osha’s Lockout regulations. brady® engineers will come to your facility and create visually-instructive, machine-specific procedures for you and place them directly onto

What does a S.T.U.D.E. bring to you?a safety and environmental protection review that:

• assists with compliance to fire codes and osha and ePa regulations

• reduces fire risks protecting both employees and companies

• increases environmental protection, supporting green initiatives

• avoids high costs of fines associated with non-compliance

• fulfills insurance carrier recommendations, reducing coverage costs

• improves housekeeping and operational efficiencies

How does the S.T.U.D.E. program work?a free, confidential, no-obligation survey of your facility is conducted by a qualified Justrite® representative who identifies potential hazards such as:

• non-compliant storage of fuels, solvents, chemicals

• Unsafe transfer and usage of flammables

• Lack of ePa required spill control equipment

• improper waste collection practices• non-existent bonding and

grounding procedures

ansell, a global leader in barrier protective products, presents guardian®. it is a unique suite of management tools helping businesses maximize safety, efficiency and productivity while reducing costs. the key benefits are: increased employee safety, reduced overall cost of ownership, productivity and scope and capability. for additional information visit www.ansellguardian.com.

haws® brings deep expertise to the world of laboratory safety. whether the subject is medically superior eyewashes, site inspections and engineering consultation or full-scale emergency wash systems with tempered water, haws® offers experience and dependability to help improve safety in the laboratory setting.

duPont™ controlled environments products include protective apparel, such as duPont™ tyvek® isoclean® and duPont™ general environment garments, and a range of accessories such as duPont™ gripper™ shoe and boot covers. single use garments from duPont™ provide an excellent balance of barrier, cleanliness and comfort as well as consistent performance, flexibility and cost control for your cleanroom applications. for a copy of duPont’s catalog, visit www.controlledenvironments.dupont.com or call your airgas representative to arrange an on-site evaluation with a duPont™ chemical protective expert.

by