2018 / 2019Integrated Learning Calendar
HANDS-ON TRAINING | INSTRUCTOR-LED TRAINING
2
INTRODUCTION TO THE E2 CONTROLLER TRAINING
$399
October 3, 2018 Brantford, ON
November 7, 2018 Montréal, QC
November 21, 2018 Québec City, QC
December 5, 2018 Dartmouth, NS
January 23, 2019 Burnaby, BC
February 20, 2019 Winnipeg, MB
March 6, 2019 Edmonton, AB
April 3, 2019 Brantford, ON
E2 SYSTEM PROGRAMMING AND INTEGRATION TRAINING
$499
October 4, 2018 Brantford, ON
November 8, 2018 Montréal, QC
November 22, 2018 Québec City, QC
December 6, 2018 Dartmouth, NS
January 24, 2019 Burnaby, BC
February 21, 2019 Winnipeg, MB
March 7, 2019 Edmonton, AB
April 4, 2019 Brantford, ON
COPELAND COMPRESSOR TRAINING
$249November 20, 2018 Brantford, ON
February 12, 2019 Brantford, ON
NATURAL REFRIGERANTS
$549December 12–13, 2018 Brantford, ON
April 10–11, 2019 Brantford, ON
MODULATION TRAINING
$249 February 20, 2019 Brantford, ON
ELECTRONICS TRAINING
$249 March 26, 2019 Brantford, ON
WHITE-RODGERS HVAC HEATING PRODUCTS TRAINING
$199 November 13–14, 2018 Brantford, ON
WHITE-RODGERS HVAC/R COOLING PRODUCTS TRAINING
$199 June 26–27, 2019 Brantford, ON
VILTER RECIPROCATING COMPRESSOR TRAINING
$300
October 16, 2018 Brantford, ON
November 13, 2018 Montréal, QC
April 16, 2019 Brantford, ON
Dates TBC Nova Scotia
Dates TBC Alberta
VILTER STARTERS AND VISSION 20/20
$300October 17, 2018 Brantford, ON
April 17, 2019 Brantford, ON
VILTER SCREW COMPRESSOR TRAINING
$400
October 18, 2018 Brantford, ON
November 14, 2018 Montréal, QC
April 18, 2019 Brantford, ON
Dates TBC Nova Scotia
Dates TBC Alberta
FULL COURSE SCHEDULE
Look for the 3 FOR 2 Symbol on selected coursesThe 3 for 2 program entitles the registering company to a complimentary seat in the same course. Complimentary seat is non-transferable between other Emerson course offerings.
Offer can be combined with multiple dates of the same course. Only valid for attendees registering and paying at the same time.
3 FOR 2Book 2 and Get 3
Two paid registrations will qualify a company for one additional
complimentary session in the same course.*
3
Stay InformedGET AHEAD OF CHANGING REGULATIONS AND NEW TECHNOLOGIES
As today’s world moves faster and technical demand becomes greater, education is no longer a choice, it’s a necessity. The speed of change in the HVACR industry is overwhelming. New technologies and government regulations bring new challenges.
Our interactive training seminars at the Emerson Integrated Learning Centre in Brantford, Ontario, and across Canada are designed to keep service technicians, manufacturers, and end users informed about system design best practices, regulatory changes, emerging technologies, and industry trends.
NEW for 2019
Completion of select Emerson instructor-led courses will give you 6 months of FREE access to our online e-learning courses. Valued at up to $2,000. Over 30 courses available to choose from.
Continue your training and sharpen your skill set online, at a time and place that suits your schedule.
https://education.emerson.com/learn
Available courses include:
• FundamentalsofAC/Refrigeration
• CompressorOperation&MechanicalFailure
• CopelandDigitalScrollCompressors
• E2Refrigeration/BuildingControls
• ProActEnergyEfficiencyProtocol
• ThermoExpansionValves
One day session 8:00 am – 4:00 pm
DATES AND LOCATIONS
October 3, 2018: Brantford, ON December 5, 2018: Dartmouth, NS January 23, 2019: Burnaby, BC February 20, 2019: Winnipeg, MB March 6, 2019: Edmonton, AB April 3, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• UnderstandtheE2controlarchitecture/hierarchy• NavigatetheE2controller• Comprehendthebasicfunctions;rackcontrol,circuit
control,condensercontrol• Usebasicfunctionstocreategraphs,initiatedefrost,
changesetpoints• Understandthealarmmanagement
FEATURED TOPICS:
• E2controlplatformoverview• E2controlhierarchy• Set-up,networking&configuration• Alarmmanagement• Introductiontoprogramming• Troubleshooting
TheEmersonlogoisatrademarkofEmersonElectricCo.©2017.AllRightsReserved.
Introduction to the E2 Controller
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifya company for one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$399perpersonincludesthehands-oncourse,allcoursematerials,breakfastandlunch.
Registeronlineat: emersoncanada.regfox.com/E2-intro
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other courses but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
One day session 8:00 am – 4:00 pm
DATES AND LOCATIONS
October 4, 2018: Brantford, ON December 6, 2018: Dartmouth, NS January 24, 2019: Burnaby, BC February 21, 2019: Winnipeg, MB March 7, 2019: Edmonton, AB April 4, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• UseUltraSite™servicesoftwareto:performbackupandrestore,programapplications,andtroubleshootproblems
• SetupEthernetPeertoPeernetwork,Modbusnetwork• AddandconfigureModbusdevices• Customizetheirapplications
FEATURED TOPICS:
• Modbusnetworkwiring• Modbusdeviceintegration• Ethernetnetwork• Pointersandassociations• AnalogandDigitalCombiners• UltraSite™Software• Programdiscretecontrols• PIDLoop
TheEmersonlogoisatrademarkofEmersonElectricCo.©2017.AllRightsReserved.
E2 System Programming and Integration
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifya company for one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$499perpersonincludesthehands-oncourse, allcoursematerials,breakfastandlunch.
Registeronlineat: emersoncanada.regfox.com/E2-advanced
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other courses but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
This course is designed for Intermediate/Advanced users of the E2 controller. Attendees should be fully comfortable navigating within the E2 environment and have considerable experience working with the E2 on a regular basis.
Séance d’un jour (8 h –16 h)
DATES ET LIEUX
7 novembre 2018: Montréal, QC
21 novembre 2018: Québec, QC
PRINCIPAUX APPRENTISSAGES
Les techniciens apprendront à :
• Comprendrel’architectureetlahiérarchiedecontrôle delaplateformeE2
• NavigationautraversdesmenusducontrôleurE2
• Comprendrelesfonctionsdebase:Contrôledugroupecompresseur,circuit,condenseur
• Utiliserlesfonctionsdebasepourproduiredesgraphiques,démarerledégivrage,changerdesconsignes
• Comprendrelagestiondesalertes
SUJETS ABORDÉS :
• SurvoldelaplateformedecontrôleE2
• HiérarchiedecontrôledelaplateformeE2
• Installation,miseenréseauetconfiguration
• Gestiondesalertes
• Introductionàlaprogrammation
• Diagnostique
LelogoEmersonestunemarquedecommerced’EmersonElectricCo.©2018.Tousdroitsréservés.
Introduction au contrôleur E2
3 POUR 2Réservez2places,
obtenez-en3Uneentreprisequipaiepourdeuxinscriptionsadroitàune
inscriptiongratuiteàlamêmeformation.*
INSCRIPTION
Lesfraisde399$parpersonneincluentlaformationpratique,ladocumentationetlesrepasdumatinetdumidi.
Inscrivez-vousenligneà: emersoncanada.regfox.com/E2-intro-fr
Les annulations dans la semaine précédant la formation ne donnent droit à aucun remboursement.
* Certaines conditions s’appliquent à l’offre 3 pour 2. L’inscription gratuite peut être utilisée pour n’importe quelle séance de la formation, mais ne peut être utilisée pour une autre formation.
FO RMATI O N I NT ÉGR ÉE
Séance d’un jour (8 h –16 h)
DATES ET LIEUX
8 novembre 2018: Montréal, QC
22 novembre 2018: Québec, QC
PRINCIPAUX APPRENTISSAGES
Les techniciens apprendront à :
• UtiliserlelogicielUltraSite™pourlasauvegardeetlarestauration,laprogrammationd’applicationsetledisgnostique
• ConfigurerlesréseauxEthernetetModbus
• AjouteretconfigurerdesappareilsModbus
• Personnaliserleursapplications
SUJETS ABORDÉS :
• CâblagederéseauModbus
• Intégrationd’appareilsModbus
• RéseauEthernet
• Pointeursetassociations
• Combineursanalogiquesetnumériques
• LogicielUltraSite™
• Programmationdecommandesprécises
• BouclePID
LelogoEmersonestunemarquedecommerced’EmersonElectricCo.©2018.Tousdroitsréservés.
Intégration et programmation du système E2
INSCRIPTION
Lesfraisde499$parpersonneincluentlaformationpratique,ladocumentationetlesrepasdumatinetdumidi.
Inscrivez-vousenligneà: emersoncanada.regfox.com/E2-avancee-fr
Les annulations dans la semaine précédant la formation ne donnent droit à aucun remboursement.
* Certaines conditions s’appliquent à l’offre 3 pour 2. L’inscription gratuite peut être utilisée pour n’importe quelle séance de la formation, mais ne peut être utilisée pour une autre formation.
FO RMATI O N I NT ÉGR ÉE
Cette formation est conçue pour les utilisateurs du contrôleur E2 de niveau intermédiaire ou avancé. Les participants doivent être parfaitement à l’aise dans un environnement E2 et avoir acquis beaucoup d’expérience en travaillant régulièrement avec la plateforme E2.
3 POUR 2Réservez2places,
obtenez-en3Uneentreprisequipaiepourdeuxinscriptionsadroitàune
inscriptiongratuiteàlamêmeformation.*
One day session 8:00 am – 4:00 pm
DATES AND LOCATIONS
November 20, 2018: Brantford, ON February 12, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• Reducecallbacks• Effectivelyservice,maintain,andtroubleshoota
compressor• Identifyperformanceissues• Avoidcompressorfailuresandwarrantyclaims
FEATURED TOPICS:
• Understandingtherefrigerationcycle• Compressorfundamentals• Compressortechnologies – Digitaltechnologies – CopelandScrolltwo-stage• Goodservicepracticesandtroubleshootingtechniques• AnalyzingsystemissueswithCoreSensetechnology• Applicationsandsystemaccessories• Understandingwhycompressorsfail• Hands-ondiagnosticsandteardown• Onlinetoolsandmobileapplications
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Copeland CompressorsCauses And Prevention Of Compressor Failures
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor oneadditionalcomplimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$249perpersonincludesthehands-oncourse,allcoursematerials,breakfastandlunch.
Registeronlineat: emersoncanada.regfox.com/copeland-training
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other courses but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
Two day sessions 8:00 am – 4:00 pm
DATES AND LOCATIONS
December 12 and 13, 2018: Brantford, ON
April 10 and 11, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• UnderstandmajortrendsinCO2, NH3, and R290
• Understandnewterminology;transcritical,supercritical,subcritical,flashgas
• Properlymapacascadeandtranscriticalboostersystem
• Usebestpracticestoservicenaturalrefrigerantsystems
• Recognizeadvantagesofusingnaturalrefrigerantsinrefrigeration
• Startup,run,andtestaCO2transcriticaltrainer
FEATURED TOPICS:
• IntroductiontoCO2,NH3,andR290asrefrigerants
• Pressureenthalpychartdifferences:
–Subcriticalvs.transcriticalsystems
• Basicsystemcomparisons:
–Secondarysystems(CO2volatilebrine)
–HybridcascadesystemsNH3/CO2
–Transcriticalboostersystems
• Safetyhandlingandmaintenance
• ChargingofCO2system
• Oilmanagement
• Gascoolercontrol
• Start-upandshutdownsequences
• Refrigerantregulationsandcodeupdate
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Natural Refrigerants
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$549perpersonincludesallcoursematerials,breakfast,andlunch.
Registeronlineat: emersoncanada.regfox.com/natural-refrigerants
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other course offerings but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
One day session 8:00 am – 4:00 pm
DATE AND LOCATION
February 20, 2019: Brantford
KEY TAKEAWAYS
Attendees will acquire the ability to:
• Understandcompressormodulationstrategies
• Understandopportunitiesfornewinstallation andretrofits
• Understandnewproductsandemerging technologies
FEATURED TOPICS:
• DigitalDiscus&Scroll
• Copeland2StageScroll
• VariableSpeedCompressors–Residential
• VariableSpeedCompressors–Commercial
• VFD’sonFixedCompressors
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Modulation Training
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor oneadditionalcomplimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$249perpersonincludesallcoursematerials,breakfast,andlunch.
Registeronlineat: emersoncanada.regfox.com/modulation
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other course offerings but is valid for the date the course is offered above.
I NTEGRATED L E A R N I N G
One day session 8:00 am – 4:00 pm
DATE AND LOCATION
March 26, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• Properlyselectandsizecomponents
• Usebestpracticesduringinstallationandservice
• Effectivelymaintainandtroubleshoot
• Optimizeefficiency
FEATURED TOPICS:
Installation,set-up,commissioning,troubleshootingandservicingof:
• X-LineController:XCM25D
• Dixell:XM643
• Alco:EC3-D72,EXD-SH1/2,Electronicvalves
• Copeland:DigitalControllers,CoreSense
Handsontrainingwillincludewiring,programmingandtestingonanactiverefrigerationsystem.
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Electronics Training
REGISTRATION
Afeeof$249perpersonincludesthehands-oncourse,allcoursematerials,breakfastandlunch.
Registeronlineat: emersoncanada.regfox.com/electronics
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other courses but is valid for the date the course is offered above.
I NTEGRATED L E A R N I N G
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor oneadditionalcomplimentarysession in
thesamecourse.*
Two day session 8:30 am – 4:30 pm
DATE AND LOCATION
November 13 and 14, 2018: Brantford, ON
KEY TAKEAWAYS
Participants will acquire the ability to:
• Understandinstallation,configuration,andmaintenanceofWhite-Rodgersheatingproducts
• Troubleshootgasvalves,thermostats,zonecontrols,andfurnaceignitioncontrols
• Understandwiringdiagramsandsystemdiagnostics
• Properlyselectgasvalves
WHO SHOULD ATTEND
Installers,commissioningandmaintenancemechanicsandtechniciansservingHVACcustomers.
FEATURED TOPICS:
• IntroductiontoWhite-Rodgersheatingproducts
• Newthermostattechnologiesmadesimple
• Gasvalves,thermostats,zonecontrols,andfurnaceignitioncontrolselection
• Crossreferencingtouniversalparts
• Onlinetoolsandapps
•Interactivegroupexercises
ATTEND FOR FREE
Complete Blue Volt online training via the link below before registering to receive free entry into the course.
https://go.bluevolt.com/whiterodgers/home/
For more details contact: Melanie.Robles@Emerson
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
White-Rodgers HVAC Heating Products Training
REGISTRATION
Afeeof$199perpersonincludesthehands-oncourse, allcoursematerials,andlunch.
Registeronlineat: emersoncanada.regfox.com/WR-Heating
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
I NTEGRATED L E A R N I N G
Two day session 8:30 am – 4:30 pm
DATE AND LOCATION
June 26 and 27, 2019: Brantford, ON
KEY TAKEAWAYS
Participants will acquire the ability to:
• UnderstandTXVEXVandsolenoidvalvefunction
• Understandpropersizing,installation,andsetupofTXV,solenoidvalves,andsystemprotectors
• Troubleshootanddiagnosecompressorissueswithelectronics
WHO SHOULD ATTEND
Installers,commissioningandmaintenancemechanicsandtechniciansservingHVACcustomers.
FEATURED TOPICS:
• IntroductiontoWhite-Rodgerscoolingcontrols
• Introductiontoelectronicvalvesandcontrollers
• Cross-referencing
• Refrigerantsandlubricants
• IntroductiontoSensi™MultipleThermostatManager andTransformativeWave
• Onlinetoolsandapps
• Interactivegroupexercises
ATTEND FOR FREE
Complete Blue Volt online training via the link below before registering to receive free entry into the course.
https://go.bluevolt.com/whiterodgers/home/
For more details contact: Melanie.Robles@Emerson
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
White-Rodgers HVAC/R Cooling Products Training
REGISTRATION
Afeeof$199perpersonincludesthehands-oncourse, allcoursematerials,andlunch.
Registeronlineat: emersoncanada.regfox.com/WR-Cooling
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
I NTEGRATED L E A R N I N G
One day session 8:00 am – 5:00 pm
DATES AND LOCATIONS
October 16, 2018: Brantford, ON
November 13, 2018: Montreal, QC
April 16, 2019: Brantford, ON
Date TBC: Nova Scotia
Date TBC : Alberta
KEY TAKEAWAYS
Technicians will acquire the ability to:
• Understandthecompressor’suniquedesignfeatures
• Properlyselectcomponentsfor400SeriesVMCCompressors
• Usebestpracticesduringinstallationandservice
• Effectivelymaintainandtroubleshoot
• Optimizeefficiency
• Compressortechnologyandcomponents
• Oilsandoilmanagement
• Compressormaintenance
• Compressortroubleshooting
• Compressorstart-up
• Reciprocatingcompressorteardownandinspection
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Vilter Reciprocating Compressors
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$300perpersonincludesallcoursematerials,breakfast,andlunch.
Registeronlineat: emersoncanada.regfox.com/vilter-recip
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other course offerings but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
FEATURED TOPICS:
Two day sessions 8:00 am – 5:00 pm
DATES AND LOCATIONS
October 17, 2018: Brantford, ON
April 17, 2019: Brantford, ON
KEY TAKEAWAYS
Technicians will acquire the ability to:
• UnderstandthecapabilitiesofViltercontrolpanels
• Understanddifferencesbetweensoftstartersand variablefrequencydrives
• Understandthebenefitsofusingelectronicstarters andVFDs
• VilterVission20/20
–Configuration
–Calibrationofsensors
– Actuator calibration
–Troubleshooting
• Starters&VFDsforcompressors
–Installation
–Configurationoverview
–Startupprocedures
–Troubleshooting
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Vilter Vission 20/20, Compressor Starters & VFDs
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifya company for one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$300perpersonincludesallcoursematerials,breakfast,andlunch.
Registeronlineat: emersoncanada.regfox.com/vission2020-starters
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other course offerings but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
FEATURED TOPICS:
One day session 8:00 am – 5:00 pm
DATES AND LOCATIONS
October 18, 2018: Brantford, ON
November 14, 2018: Montreal, QC
April 18, 2019: Brantford, ON
Date TBC: Nova Scotia
Date TBC : Alberta
KEY TAKEAWAYS
Technicians will acquire the ability to:
• Understandthecompressor’suniquedesignfeatures
• ProperlyselectcomponentsforVSMandVSScompressors
• Inspectcompressorinternalsandtolerances
• Effectivelymaintainandtroubleshoot
• Optimizeefficiency
• SingleScrewcompressortechnologyandcomponents
• Oilcoolingandmanagement
• Calibrationofactuators
• Compressorstart-up,maintenanceandtroubleshooting
• SingleScrewcompressorteardownandinspection
TheEmersonlogoisatrademarkofEmersonElectricCo.©2018.AllRightsReserved.
Vilter Screw Compressors
3 FOR 2Book2andGet3
Twopaidregistrationswillqualifyacompanyfor one additional complimentarysession in
thesamecourse.*
REGISTRATION
Afeeof$400perpersonincludesallcoursematerials,breakfast,andlunch.
Registeronlineat: emersoncanada.regfox.com/vilter-screw
Cancellations received within one week prior to the scheduled course date will be charged the full course fee.
* Some conditions apply on 3 for 2 offer. Complimentary seat is non-transferable to other course offerings but is valid for any date the course is offered above.
I NTEGRATED L E A R N I N G
FEATURED TOPICS:
17
Online Product InformationEmerson offers the most comprehensive product information intheindustrythroughouronlineProductInformation(OPI)tool. Easily access:
• ProductSpecificationsforcompressorsand condensing units
• Ratingcoefficients,sound/vibrationratings,drawings and wiring diagrams, cross reference data
• Crossreferencetools
• LibraryofmarketingandapplicationEngineeringBulletins
• ProductselectionandCoreSense™ software downloads
• Q&Aandmore
Product Selection SoftwareEmerson’sProductSelectionSoftwareisanintegratedPCbased software tool that allows users to select and generate compressor performance. Users have the ability to:
• Simulateperformanceofarefrigerationrackofupto 10 compressors
• Performannualenergyanalysisofselectedcompressors
• Generatenon-standardconditionscompressorperformance,downloadratingcoefficients,viewreferencedrawings, wiring diagrams, and bill-of-materials
• SimulateACModulationfordesigningchillersand rooftop units
• SearchforaCopelandcompressorbyapplicationconditions
https://climate.emerson.com/online-product-information/opiinterfaceservlet
https://climate.emerson.com/online-product-information/OPIServlet?action=xtools
TECHNICAL SUPPORT WHEN YOU NEED IT
Copeland™ MobileGeton-the-goaccesstoEmersonOnlineProductInformationforCopelandcompressorspecifications.CopelandMobileoffersfullACandRefrigerationProductSupport.Quicklylocate:
• Model/serialnumberscanning
• Replacementcrossreferences
• Servicereplacementparts
• Compressordiagnostics
• Wheretobuy
Digital Tools & Resources
Copeland Mobile Offers full AC and Refrigeration Product Support:•Model/SerialNumberScanning•ReplacementCrossReference•ServiceReplacementParts•CompressorDiagnostic•WheretoBuy
Cell_Phone_Card_R1.indd 2
18-07-31 10:22 AM
Technical Support on the Go
Scan the QR code or visit your app store to download.
30 years of Copeland Compressor Data
Complete A/C and Refrigeration Technical Information
A/C and Refrigeration Troubleshooting
Available for Android and iOS
Cell_Phone_Card_R1.indd 1 18-07-31 10:22 AM
18
Integrated Learning 2018/19InstructorProfiles
Trevor Matthews RSE
HVAC/RTRAINING&DEVELOPMENTSPECIALIST
Trevorhasover14yearsofexperienceintherefrigerationindustryandisacertifiedtrainerinadulteducation. He has worked with commercial refrigeration and HVAC companies in Canada as well as abroad. Trevor is dedicated to providing professional training and helping clients achieve their vision for success through his role with Emerson.
François Aucoin, Ing. M.Sc.A.
SENIORMANAGER,PROJECT&FIELDSERVICES
FrançoisisaProfessionalEngineerwhobeganhiscareerinrefrigerationastheManagerofDesignandEnergyforamajorsupermarketchaininCanada.Françoishasover10yearsofexperienceinProjectManagement with Emerson Retail Solutions, and has designed over 250 refrigeration, HVAC and energy management systems.
Jeff StroudNATIONAL RETAIL SOLUTIONS ACCOUNT MANAGER
Jeff is responsible for business development and account management for Retail Solutions Canada. Jeffhas25yearsofexperienceinvariousrefrigerationbusinesssegmentsincludingCopeland,aftermarket wholesale, OEM coordination at Emerson and recently, controls and automation with Emerson Retail Solutions.
Peter SisonFIELDSERVICESSPECIALIST
PeterisaFieldServicesSpecialistforEmersonRetailSolutionsandhasworkedintherefrigerationand HVAC industry for over 18 years. He started his career as a refrigeration technician and prior, has studied as a Computer Engineering Technologist. He specializes in the E2 platform and all of the integrated electronic devices from the Emerson product line.
Yvon St. GelaisFIELDSERVICESPECIALIST
Yvonbringsover23yearsofexperienceworkingintheautomationindustry.Hestartedhiscareerasan Electro-technician and prior, has studied automation. Working with Emerson for the past 13 years, Yvon has been able to utilize his skills to implement and support countless automated refrigeration and HVAC systems. Yvon specializes in the E2/Site Supervisor platforms and all of the integrated electronic devices from the Emerson product line.
Tim BurkeEDUCATIONAL,APPLICATIONS,ANDTECHNICALSERVICESMANAGER
Tim is a 40 year veteran to the HVACR industry and an Education and Learning Leader for White- Rodgers.AcertifiedinstructorforNATEandACCAtrainings,heisrecognizedasanexpertinsuccessful strategies for the application, troubleshooting and sales of HVACR products. He approaches contractor technical and sales training from the technician’s perspective in a common sense, down-to-earth manner that is readily understood and immediately applicable.
19
Alain Mongrain RSE
CONTRACTORBUSINESSDEVELOPMENTMANAGER
Alainhas34yearsofindustryexperienceworkinginvariouscapacitiesandover8yearsofexperiencewithEmerson.AlainsupportscontractorsinthefieldwiththeimplementationofnewtechnologiesandretrofitsolutionsandeducatespartnersonthebenefitsandvaluethatcanbederivedfromanEmerson solution.
Jim DickINDUSTRIALSERVICESPECIALIST
Jim is responsible for start-up, service and warranty of the Vilter Refrigeration and Gas Compression productsatEmersonCanada.JimisalicensedRefrigerationMechanicwithover25yearsexperienceintheindustrialrefrigerationfield.Hehasextensiveexperienceinlargeammoniarefrigerationsystems,being involved in start-up, service and automation.
Stuart DillAPPLICATIONSENGINEERINGMANAGER
StuartisaLicensedMechanicalEngineerwithover15yearsofexperienceintheHVACfield.Hisbackground includes the design of residential, commercial, and mission critical cooling and refrigeration systems in a wide variety of applications. In his current role, he manages the applications engineering department for AC and refrigeration controls.
Greg SwierczMANAGER, TECHNICAL SERVICES
Greghasover30yearsofexperienceworkingatEmerson.Withabackgroundinrefrigeration,airconditioning, and electronics he has worked in Engineering, Application Engineering, Operations, Customer Training and Sales roles within Emerson. As the Manager of the Technical Services team at Emerson’s Brantford facility, Greg is active in many aspects of customer support including customer training.
Bruce BosnellPRODUCTSUPPORTSPECIALIST
BruceisaProductSupportSpecialistwithover30yearsofexperienceworkingatEmerson.Bruce’sworkexperienceatEmersonhasencompassed;MultiSkilledLeadManufacturingTechnician,Compressor Analysis Technician, Warranty Administrator, Engineering Control Specialist, ProcurementandOperationSupport.
Integrated Learning 2018/19InstructorProfiles
COPELAND™ MOBILE
Mobile access to over 30 years of Copeland compressor product information.
WR™ MOBILE
New mobile app provides on-the-go access to White-Rodgers product data.
EMERSON WHITE-RODGERS PRODUCTS
Mobile access to White-Rodgers product catalogues and online tools.
SENSI™
The Sensi Wi-Fi programmable thermostat gives you complete control of your comfort. Anytime. Anywhere.
HVAC CHECK & CHARGE
Instant mobile refrigerant charge calculator for HVACR applications.
COPELAND X-REF™
Instant mobile access to Emerson’s compressor cross-reference database.
HVACR FAULT FINDER™
On-site compressor toubleshooting for air conditioning and refrigeration applications.
VILTER SELECT™ LITE
Provides Vilter Select users mobile access to their projects and compressor ratings while offline.
EMERSON PT PRO™
On-the-go access to pressure and temperature conversions.
VILTER DOCS™
One-touch access to Vilter’s support documents.
AE BULLETINS™
Serves as a technical reference to use whenever or wherever you may need it.
2018CAN-11
Scan the QR code to access these apps on your mobile phone or tablet.
CO2 Information Tool Allows customers to easily access information related to Emerson CO2 products. Scan the QR code for access to the tool.
The HVACR Mobile Toolbox
The Emerson logo is a trademark and service mark of Emerson Electric Co. ©2018. All rights reserved.
For more information call 519 756 6157 or visit us online at: www.climate.emerson.com/en-ca
Ad_Mobile_Apps_Eng_R2.indd 1 18-08-22 1:22 PM