2018Full Dealer Program Catalog

• Gen 1.3 55 Gal Drum WITH Agitation

• #90155 (120V/60Hz)• #90850 (120V/50Hz)• #90851(240V/50Hz)

• Gen 1.3 125 Gal Drum WITH Agitation

• #90355

• Same control unit & pump as 55 Gal Gen 1.3• Larger tank to extend replenishment cycle• Includes 2nd gen remote, waterproof cover• Not iMist-ready

#90155 - $935.00#90850 - $960.00

#90851 - #1010.00

$1445.00

Drum Units

• Includes 2nd gen remote, waterproof cover• Not iMist-ready

• Gen 1.3 55 Gal Drum NO Agitation

• #90000 (120V/60Hz)

$810.00• Includes 1st gen remote, waterproof cover• Not iMist-ready

• Gen 1.3 55 Gal Drum WITH Agitation and Leak Detection

• #80100

$990.00• Includes 2nd gen remote, waterproof cover• iMist-ready

• Gen 1.3 125 Gal Drum WITH Agitation and Leak Detection

• #80300

• Same control unit & pump as 55 Gal Gen 1.3• Larger tank to extend replenishment cycle• Includes 2nd gen remote, waterproof cover• iMist-ready

$1500.00

2018 Full Dealer Program Catalog 2

• iMist2 Gateway• #15150

• Gen 1.3 Zone Kit• #20071

• Allows you to use one unit instead of two if nozzle circuit is larger than about 80 nozzles

• Enables monitoring and management over smartphone app and website

• For use only with units labelled as iMist-ready

$145.00

$160.00

Accessories for Drum Unit

• Gen 1.3 55 Gal Nozzle Circuit Filter

• #29013

• Installed on misting unit with bracket, protects nozzles from fouling

• Filter element ($3) should be changed annually

$44.00

• Gen 1.3 125 Gal Nozzle Circuit Filter

• #29125

• Installed on misting unit with bracket, protects nozzles from fouling

• Filter element ($3) should be changed annually

$44.00

2018 Full Dealer Program Catalog 3

• Gen 3 Tankless –includes agitation and leak detection

• #90500 (120V/60Hz)• #90853 (120V/50Hz)• #90854 (120V/50Hz)

#90500 - $1385.00#90853 - $1435.00#90854 - #1485.00

Tankless Unit

• Finish kit includes 2nd Gen remote, PlusCapfor tip and measure bottle, faucet adapter, 25’ of 3/8” water line, water line filter

• iMist-ready

2018 Full Dealer Program Catalog 4

• Empty Tip and Measure bottle

• #10340

• Gen 3 Zone Kit• #20073

• Hose Y for Gen 3• #10095

• You transfer concentrate into bottle• Tip and measure ports allow bottle to vent

• One port serves Gen 3, the other preserves the faucet for use of a garden hose

• Allows you to use one unit instead of two if nozzle circuit is larger than about 80 nozzles

$10.00

$16.00

$160.00

Accessories for Tankless Unit

• Gen 3 Nozzle Circuit Filter

• #29040

• Installed on misting unit with bracket, protects nozzles from fouling

• Filter element ($3) should be changed annually

$44.00

• iMist2 Gateway• #15150

• Enables monitoring and management over smartphone app and website

• For use only with units labelled as iMist-ready

$160.00

2018 Full Dealer Program Catalog 5

• Slimline Nozzle – 45 deg

• #20048

• Slimline Nozzle –straight

• #20045

• 15” Riser Assembly• #50500

• 30” Riser Assembly• #50530

• Installed every 10 ft on fence, wall or eave• Requires a ¼” union tee• Sold in bags of 10

• Include all components to assemble riser –45 deg nozzle, union coupling, 30” copper riser, union tee, stabilizer

• Sold in packs of 10

• Include all components to assemble riser –45 deg nozzle, union coupling, 30” copper riser, union tee, stabilizer

• Sold in packs of 10

$66.00

$66.00

$179.00

$163.00

Nozzles & Risers• Installed every 10 ft on fence, wall or eave• Requires a ¼” union tee• Sold in bags of 10

• Commercial Riser Assembly

• #54000

• Include all components to assemble riser –45 deg nozzle, riser union, 24” anodized aluminum riser, hardened tip, union tee, 26” black tubing

• Sold in packs of 10

$195.00

2018 Full Dealer Program Catalog 6

• Union tee ¼”• #10185

• Union elbow ¼”• #10180

• Require 1 per structure nozzle• Plan for 10 extra per installation for

internal branches• Sold in bags of 10

• Use in eaves to make 90 turns rather than kinking tubing.

• Plan 10 per standard installation• Sold in bags of 10

$26.00

$26.00

¼” Push-to-Connect Fittings

2018 Full Dealer Program Catalog 7

• ¼” Nylon Tubing• Black - # 10360• Tan - #10368• White - #10366• Gray - #10367• Cocoa - #10369• Natural - #10365

• Dynaclamp ¼”• White - #10223• Natural - #10227

• Nylon Clamp – 3/8”• Black - #10210• Natural - #10215

• Includes screw, clamps tubing to surface - 1 clamp every 2 ft

• Sold in bags of 100

• Clamps nozzle/fitting to surface – 1 clamp per structure nozzle

• Sold in bags of 100

$95.00

$8.45

$5.25

¼” Tubing & Clamps

• 10 ft per nozzle standard• Sold in 500 ft roll

2018 Full Dealer Program Catalog 8

• 3/8” Black Tubing• #10370

• Union Coupling 3/8”• #10179

• Reducer – ¼” x 3/8”• #10434

• Requires reducer to join ¼” tubing to 3/8” tubing

• Joins ¼” tubing to 3/8” union coupling or 3/8” union elbow

• Pressure boost line requires a reducer and either a 3/8” union coupling or 3/8” union elbow at each end of the boosting line

$205.00

$3.45

$3.40

3/8” Pressure Boost Components

• Used in pressure boost line or to protect ¼” line on tree nozzles

• Sold in 500 ft roll

• Union Elbow 3/8”• #15010

• Requires reducer to join ¼” tubing to 3/8” tubing

$4.25

2018 Full Dealer Program Catalog 9

• Riptide – ½ gallon standard bottle

• #10325

• Sector – ½ gallon tip and measure bottle

• #10330

• Sector – 1 gallon standard bottle

• #10430

• Ingredients – 10% synthetic permethrin, 10% PBO synergist

• Sold in cases of 4 x ½ gallon bottles• Discounts

• $20 per case for orders of 2-4 cases• $30 per case for orders of 5 or more

cases

• Ingredients – 10% synthetic permethrin, 10% PBO synergist

• Transfer to 1 gallon tip and measure bottle for use in Tankless unit

• Sold in cases of 4 x 1 gal bottles• Discounts

• $50 per case for orders of 2-4 cases• $80 per case for orders of 5 or more

cases

$426.00

$280.00

$480.00

Concentrates

• Ingredients – 5% natural pyrethrins, 25% PBO synergist

• Transfer to 1 gallon tip and measure bottle for use in Tankless unit

• Sold in cases of 4 x ½ gallon bottles• Discounts

• $20 per case for orders of 2-4 cases• $30 per case for orders of 5 or more

cases

2018 Full Dealer Program Catalog 10

• Tube Cutter• #10385

• Tube Release Tool• #10390

• Pressure Tester• #28000

• To remove tubing from fittings

• Plug tester into tee on nozzle circuit to read pressure

• Goal is minimum 200 psi, per Pressure Engineering Rules

$7.50

$6.50

$12.75

Tools

• To make non-crimping clean cut on tubing

• Slimline nozzle wrench set

• #25070

• Used to disassemble and reassemble slimline nozzles during rebuilding

$9.50

• Winterization Air Compressor Adapter

• #20052

• Used in purge fluid from nozzle circuit during winterization

• Connect to portable air compressor

$5.00

2018 Full Dealer Program Catalog 11

• Replacement Nozzle Tip

• #10195

• Nozzle Ball and Spring

• #10197

• Union Coupling ¼”• #10175

• Rebuild clogged nozzles• Sold in bags of 100

• Repair leaks in ¼” tubing• Sold in bags of 10

$42.50

$36.00

$26.00

Service Parts

• To swap for clogged nozzles• Clean then rebuild with balls and springs

($.36 apiece)

• Nozzle Circuit Filter Element

• #16020

• Replacement element for nozzle circuit filter

• Replace element annually• Sold in packs of 5 elements

$15.00

2018 Full Dealer Program Catalog 12

• Door Hanger• #30130

• Proposal folders with inserts

• #30145

• Quad Fold Brochure• #30110

• Present your proposal in this high quality folder

• Contains inserts that explain misting, differentiates MistAway’s equipment and addresses questions about insecticide

• Sold in boxes of 10

• Full color on high quality stock• May be personalized with Dealer

Name/Logo/Contact info with clear labels• Sold in packs of 50

$12.50

$26.00

$12.50

Marketing Collateral

• Full color on high quality stock• May be personalized with Dealer

Name/Logo/Contact info with clear labels• Sold in packs of 50

• iMistAway insert• #30153

• For use in proposal folder• Describes iMistAway and addresses cyber-

security

$10.00

• “Authorized MistAway Dealer” Auto Door Magnet

• #30175

• 16” x 11” oval $5.00

2018 Full Dealer Program Catalog 13