EDITORIAL
Andreas von LangsdorffManaging Director
Globalisation has made many companies travelers on
turbulent distribution channels.
Only the most important (things) can take up precious
space in our luggage and any ‘excess baggage’ will sim-
ply hold us back. A determined attitude is required to
take the right route.
Therefore, be sure to take Zambelli with you on your
journey.
In addition to our wide range of accessories in various
materials, the complete system is available in galvani-
zed steel and a robust colour coated galvanized steel.
So, we offer a range of efficient systems, that can be
colour coordinated to complement the façade of any
house.
The complete range of systems meet the very highest
standards and we expect it to meet and exceed all your
rainwater requirements too.
Tell us your goals for 2018! We’re looking forward to an
amazing journey together.
2
Peter BrennerHead of Exporttel. +49 8555 409-63fax +49 8555 409-9963mob. +49 171 7630011e-mail [email protected]
Sonja TrsIn-house Sales Exporttel. +49 8555 409-78fax +49 8555 409-9978e-mail [email protected]
Sabrina SchmidIn-house Sales Exporttel. +49 8555 409-64fax +49 8555 409-9964e-mail [email protected]
3
COLOUR COATING ROBUST
As the name implies, this innovative coating provides for a struc-tured, hard and especially tough finish. The Zambelli roof drainage elements thereby receive a consistent color and gloss,being scratch- and color-resistant.
OUR NEW COLOUR-COATING ROBUSTCONVINCES DUE TO EXCELLENTFIGURES:
Scratch resistance ≥ 30 N according to EN13523-12:2004 UV-resistance RUV 4 according to EN10169-2
A complete system for highest demands!
STRUCTURE OF COLOURCOATING ROBUST
OUR MASTER SYSTEM ISAVAILABLE IN:
Illus
trat
ion
sim
ilar:
diff
eren
ces
in c
olou
r cau
sed
by p
rintin
g.
copper titanium-zinc
steel galvanized RAL 9006 white aluminium
RAL 9002 grey white Testa di Moro
RAL 7016 anthracite grey RAL 7037 dust grey
RAL 8004 copper brown RAL 9005 jet black
highest colour fastness class according to EN
1016
9
RUV4✩
✩ ✩
robust-top coat (approx. 20 μm) as polyestercoating for a maximum scratch resistance
primer (approx. 5 μm) for a perfect bonding and solid corrosion protection
zinc-magnesium layer at least 120 g/m2 for a durable corrosion protection
Steel - especially optimized for use in water drainage purposes
4
OUR GALVANIZED MASTER SYSTEM
Special durability and highest corrosion protection distinguish theZambelli System. The innovative advantage: all accessories for allversion – galvanized steel or color coating robust – are made withthe same pre-coated material.
OUR GALVANIZED MASTER SYSTEMMAKES EVERYTHING SIMPLE:
Optically, due to an uniform and immaculate surface Qualitatively, due to a stable and long-lasting new material
Accurately, since everything is proportioned perfectly And in price, which is cheaper compared to other
metals
S as for strong and stabile
Galvanized steel has proved its durable corrosion protection and maximum resistance in the sector of metal sheet work. A roof drai-nage system made out of galvanized steel absorbs high wind and snow loads. Furthermore, the length expansion is less compared to systems produced out of zinc, copper, etc.
Not only the material is the first class!
We had to develop particular manufacturing technologies in order to produce the complete Zambelli Master system out of pre-galvanized steel. By doing so, we can guarantee a uniform surface in our entire Master system and fulfil the highest de-
mands on quality and durability. Moreover, we will abstain from hot dip galvanizing with immediate effect which, in turn, pro-tects the environment and, therefore, makes our roof drainage products even more sustainable.
galvanized
hot dip galvanized
A VISIBLEDIFFERENCE!
The unobtrusive seam on the backside is produced by means of a special welding process. The corrosion protection, therefore, remains.
ZAMBELLIMASTER OUTLET
Our galvanized Master elbow is directly drawn from the seamed pipe. The Master elbow with its interior seam is therefore com-pletely identical to the downpi-pes in optic and design.
ZAMBELLIMASTER ELBOW
Thermal expansion values in comparisonmm/m*100K
steel ferriticstainless steel
austeniticstainless steel copper zinc aluminium
1.20 1.06 1.60 1.65 2.20 2.38
PATENTED
5
Gutter according to EN 612, bead form II, price per meter
333 144133 8,00
280 144128 7,25
250 144125 6,65
Corneroutside corner 90°, half-round, seamless deep drawn, stabilization through fixed bead, continuous water bend
333/300 4 144405 17,25
280/300 4 144410 17,00
250/300 4 144415 16,85
Cornerinside corner 90°, half-round, deep-drawn seamless
333/300 4 144805 17,25
280/300 4 144810 17,00
250/300 4 144815 16,85
Gutter Connector with bead connector, fixing lock and flexible Z-spring, shape according to DIN 18461
333 10 145805 7,65
280 10 145810 7,55
250 10 145815 7,45
Gutter Sieve leaf collector for pushing into gutter drain
87-100 25 128410 2,90
75-80 25 128420 2,75
Gutter Stark® Leaf Guard®for halfround gutters, length 200 resp. 100 cm, incl. supports and fixing clips, aluminium with anodization in copper colour or aluminium blank, price per meter
333/2000 20 158505 13,75
280/2000 20 158510 11,40
Gutter Hook long version, with reinforcing seam, spring/spring
333-30/5+5 25 148605-LANG 4,10
280-30/5+5 25 148610-LANG 4,05
250-25/5+5 25 148615-LANG 4,05
Fascia Hanger fix to the wall, spring/spring, flat to the wall against tilting effect
333 25 148630 2,75
280 25 148635 2,70
250 25 148640 2,65
Adjustable Unit variable angle for inclination, for dimensions 333, 280, 250
333-250 25 148667 2,90
Gutter Support deep-drawn
333/280/250 100 148790 1,60
Stop End large version, half-round, for horizontal gutter installation, for seaming (both sides)
333 25 146006 1,40
280 25 146011 1,35
250 25 146016 1,35
sizes packaginginformation
ZINC MAGNESIUM ROBUSTart.no. price
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
RAL 9002 grey white Testa di Moro RAL 7016 anthracite grey RAL 7037 dust grey RAL 8004 copper brown RAL 9005 jet black
7
Stop End half-round, with rubber sealing, for simple push-on installation
333 25 146705 4,70
280 25 146710 4,45
250 25 146715 4,25
Outlet oval, with compass card, reinforced bend, eye and bevel
333/100 5 140015 10,60
280/80 5 140050 12,20
250/80 5 140055 10,75
Hoppersquare version, without overflow
100 4 141910 134,85
80 4 141920 134,85
Downpipe according to EN 612, seamed, price per meter, length 2 rm
100 147910 8,40
80 147980 7,30
Bracket for downpipe, with thread socket M10 for screw
100/M10 25 147710 4,60
80/M10 25 147780 5,25
Screw for downpipe bracket with thread socket, yellow chromated (in copper column) and galvanized (in galvanized column), M10
300/M10 25 127610-300 1,80
250/M10 50 127610-250 1,29
200/M10 25 127610-200 0,82
140/M10 50 127610-140 0,57
Dowel for downpipe brackets with thread socket M10
long-shaft dowel for fastening through insulating layers
10/280 25 108900-280 0,67
10/240 25 108900-240 0,62
10/180 25 108900-180 0,52
frame plug for hard bases
10/120 25 108900-120 0,52
Screw Pin for downpipe bracket with thread socket M10, self-tapping
300/M10 25 127613-300 1,91
200/M10 25 127613-200 1,70
140/M10 25 127613-140 1,39
80/M10 25 127613-80 0,88
Cap white
universal 25 107800 0,31
Elbow 72°single seamed, made out of pipe
100/72° 8 142410 9,75
80/72° 8 142430 9,20
sizes packaginginformation
ZINC MAGNESIUM ROBUSTart.no. price
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
RAL 9002 grey white Testa di Moro RAL 7016 anthracite grey RAL 7037 dust grey RAL 8004 copper brown RAL 9005 jet black
8
S-Curve single seamed, made out of pipe
100 8 143605 11,35
80 8 143620 11,05
Downpipe Connector100 10 147105 7,05
80 10 147115 6,80
Downpipe Junction 72°
100/100-72° 4 147010-100-72 28,45
100/80-72° 4 147010-80-72 28,45
80/80-72° 4 147080-80-72 27,35
Rainwater Pipe Flap with sieve
100 4 147305 38,75
80 4 147315 38,75
Pipe Cover with Bead100/115-120 20 146815 8,15
80/115-120 20 146825 7,30
Correction Sprayavailable in our standard colours
400 ml 1 100110 20,50
Dicht 7 universal glue and sealing agent, 310 ml cartridge, Shoregrade 60 without solvents, humidity-resistant, coatable, odourless, colour: grey
310 ml 12 100000 29,55
Glue Set with acetone cleaner, Dicht 7, cleaning cloth, sand paper
1 100010 50,45
sizes packaginginformation
ZINC MAGNESIUM ROBUSTart.no. price
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
RAL 9002 grey white Testa di Moro RAL 7016 anthracite grey RAL 7037 dust grey RAL 8004 copper brown RAL 9005 jet black RAL 9002 grey white Testa di Moro RAL 7016 anthracite grey RAL 7037 dust grey RAL 8004 copper brown RAL 9005 jet black
9
Gutteraccording to EN 612, bead form II, price per meter
333 124133 5,95
280 124128 5,20
250 124125 5,20
Corneroutside corner 90°, half-round, seamless deep drawn, stabilization through fixed bead, continuous water bend
333/300 5 124405 13,30
280/300 5 124410 12,70
250/300 5 124415 12,45
Cornerinside corner 90°, half-round, deep-drawn seamless
333/300 5 124805 13,30
280/300 5 124810 12,70
250/300 5 124815 12,45
Gutter Connectorwith bead connector, fixing lock and flexible Z-spring, shape according to DIN 18461
333 10 125805 5,95
280 10 125810 5,85
250 10 125815 5,80
Gutter Sieveleaf collector for pushing into gutter drain
87-100 25 128410 2,90
75-80 25 128420 2,75
Gutter Stark® Leaf Guard®for halfround gutters, length 200 resp. 100 cm, incl. supports and fixing clips, aluminium with anodization in copper colour or aluminium blank, price per meter
333/2000 20 158505 13,75
280/2000 20 158510 11,40
Gutter Hooklong version, with reinforcing seam, spring/spring
333-30/5+5 10 128605-LANG 4,10
280-30/5+5 10 128610-LANG 3,90
250-25/5+5 10 128615-LANG 3,65
Fascia Hangerfix to the wall, spring/spring, flat to the wall against tilting effect
333 25 128630 2,20
280 25 128635 2,15
250 25 128640 2,10
Adjustable Unit variable angle for inclination, for dimensions 333, 280, 250
333-250 25 128667 1,00
Gutter Support deep-drawn
333/280/250 100 128790 1,45
Stop Endlarge version, half-round, for horizontal gutter installation, for seaming (both sides)
333 25 126006 0,88
280 25 126011 0,77
250 25 126016 0,77
Stop Endhalf-round, with rubber sealing, for simple push-on installation
333 25 126705 3,00
280 25 126710 2,80
250 25 126715 2,65
sizes packaginginformation
STEEL GALVANIZEDart.no. price
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018 11
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
Outlet oval, with compass card, reinforced bend, eye and bevel
333/100 25 120015 9,60
280/80 25 120050 9,60
250/80 25 120055 9,60
Hoppersquare version, without overflow
100 4 121910 106,00
80 4 121920 106,00
Downpipeaccording to EN 612, seamed, price per meter, length 2 rm
100 127910 6,40
80 127980 5,05
Bracketfor downpipe, with thread socket M10 for screw
100/M10 25 127710 2,20
80/M10 25 127780 2,20
Screwfor downpipe bracket with thread socket, yellow chromated (in copper column) and galvanized (in galvanized column), M10
300/M10 25 127610-300 1,80
250/M10 50 127610-250 1,29
200/M10 25 127610-200 0,82
140/M10 50 127610-140 0,57
Dowel for downpipe brackets with thread socket M10
long-shaft dowel for fastening through insulating layers
10/280 25 108900-280 0,67
10/240 25 108900-240 0,62
10/180 25 108900-180 0,52
frame plug for hard bases
10/120 25 108900-120 0,52
Screw Pin for downpipe bracket with thread socket M10, self-tapping
300/M10 25 127613-300 1,91
200/M10 25 127613-200 1,70
140/M10 25 127613-140 1,39
80/M10 25 127613-80 0,88
Cap white
universal 25 107800 0,31
sizes packaginginformation
STEEL GALVANIZEDart.no. price
12
Elbow 72°single seamed, made out of pipe
100/72° 25 122410 8,15
80/72° 25 122430 7,60
S-Curve single seamed, made out of pipe
100 10 123605 9,80
80 10 123620 9,60
Downpipe Connector100 25 127105 5,05
80 25 127115 4,85
Downpipe Junction 72°
100/100-72° 10 127010-100-72 16,70
100/80-72° 10 127010-80-72 16,70
80/80-72° 10 127080-80-72 16,70
Rainwater Pipe Flap with sieve
100 10 127305 29,10
80 10 127315 29,10
Pipe Cover with Bead100/115-120 20 126815 3,90
80/115-120 20 126825 3,90
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
sizes packaginginformation
STEEL GALVANIZEDart.no. price
13
Gutteraccording to EN 612, bead form II, price per meter
333 114133 0,85 36,25 37,10 37,95 38,80 39,65 40,50 41,35 42,20 43,05 43,90
280 114128 0,70 30,85 31,55 32,25 32,95 33,65 34,35 35,05 35,75 36,45 37,15
Corneroutside corner 90°, half-round, seamless deep drawn, stabilization through fixed bead, continuous water bend
333/300 5 114405 0,50 24,70 25,20 25,70 26,20 26,70 27,20 27,70 28,20 28,70 29,20
280/300 5 114410 0,45 23,80 24,25 24,70 25,15 25,60 26,05 26,50 26,95 27,40 27,85
Cornerinside corner 90°, half-round, deep-drawn seamless
333/300 5 114805 0,50 24,70 25,20 25,70 26,20 26,70 27,20 27,70 28,20 28,70 29,20
280/300 5 114810 0,45 23,80 24,25 24,70 25,15 25,60 26,05 26,50 26,95 27,40 27,85
Gutter Connectorwith bead connector, fixing lock and flexible Z-spring, shape according to DIN 18461
333 10 115805 0,20 9,55 9,75 9,95 10,15 10,35 10,55 10,75 10,95 11,15 11,35
280 10 115810 0,15 8,65 8,80 8,95 9,10 9,25 9,40 9,55 9,70 9,85 10,00
Gutter Sieveleaf collector for pushing into gutter drain
87-100 25 118410 0,10 6,25 6,35 6,45 6,55 6,65 6,75 6,85 6,95 7,05 7,15
75-80 25 118420 0,10 6,00 6,10 6,20 6,30 6,40 6,50 6,60 6,70 6,80 6,90
Gutter Stark® Leaf Guard®for halfround gutters, length 200 resp. 100 cm, incl. supports and fixing clips, aluminium with anodization in copper colour or aluminium blank, price per meter
333/2000 20 118505 22,50 22,50 22,50 22,50 22,50 22,50 22,50 22,50 22,50 22,50
280/2000 20 118510 19,45 19,45 19,45 19,45 19,45 19,45 19,45 19,45 19,45 19,45
Gutter Hooklong version, with reinforcing seam, spring/spring
333-30/5+5 10 118605-LANG 0,35 16,75 17,10 17,45 17,80 18,15 18,50 18,85 19,20 19,55 19,90
280-30/5+5 10 118610-LANG 0,30 14,55 14,85 15,15 15,45 15,75 16,05 16,35 16,65 16,95 17,25
Fascia Hangerfix to the wall, spring/spring, flat to the wall against tilting effect
333 25 118630 0,10 5,30 5,40 5,50 5,60 5,70 5,80 5,90 6,00 6,10 6,20
280 25 118635 0,10 4,80 4,90 5,00 5,10 5,20 5,30 5,40 5,50 5,60 5,70
Adjustable Unit variable angle for inclination, for dimensions 333, 280, 250
333-250 25 118667 0,15 5,40 5,55 5,70 5,85 6,00 6,15 6,30 6,45 6,60 6,75
Gutter Support deep-drawn
333/280/250 100 118790 0,05 1,90 1,95 2,00 2,05 2,10 2,15 2,20 2,25 2,30 2,35
Stop Endlarge version, half-round, for horizontal gutter installation, for seaming (both sides)
333 25 116006 0,06 2,39 2,45 2,51 2,57 2,63 2,69 2,75 2,81 2,87 2,93
280 25 116011 0,05 2,21 2,26 2,31 2,36 2,41 2,46 2,51 2,56 2,61 2,66
Stop Endhalf-round, with rubber sealing, for simple push-on installation
333 25 116705 0,10 5,15 5,25 5,35 5,45 5,55 5,65 5,75 5,85 5,95 6,05
280 25 116710 0,09 4,60 4,69 4,78 4,87 4,96 5,05 5,14 5,23 5,32 5,41
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018
sizes packaginginformation
COPPERart.no. price 551 576 601 626 651 676 701 726 751 776
575 600 625 650 675 700 725 750 775 800
15
Outletoval, with compass card, reinforced bend, eye and bevel
333/100 25 110015 0,30 12,65 12,95 13,25 13,55 13,85 14,15 14,45 14,75 15,05 15,35
280/80 25 110050 0,30 12,65 12,95 13,25 13,55 13,85 14,15 14,45 14,75 15,05 15,35
Hoppersquare version, without overflow
100 4 111910 2,50 145,75 148,25 150,75 153,25 155,75 158,25 160,75 163,25 165,75 168,25
80 4 111920 2,50 142,20 144,70 147,20 149,70 152,20 154,70 157,20 159,70 162,20 164,70
Downpipeaccording to EN 612, price per meter, length 2 rm
100 117910 0,85 37,40 38,25 39,10 39,95 40,80 41,65 42,50 43,35 44,20 45,05
80 117980 0,75 30,30 31,05 31,80 32,55 33,30 34,05 34,80 35,55 36,30 37,05
Bracketfor downpipe, with thread socket M10 for screw
100/M10 25 117710 0,05 5,65 5,70 5,75 5,80 5,85 5,90 5,95 6,00 6,05 6,10
80/M10 25 117780 0,05 5,35 5,40 5,45 5,50 5,55 5,60 5,65 5,70 5,75 5,80
Screwfor downpipe bracket with thread socket, yellow chromated (in copper column) and galvanized (in galvanized column), M10
300/M10 25 117610-300 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80 1,80
200/M10 25 117610-200 0,82 0,82 0,82 0,82 0,82 0,82 0,82 0,82 0,82 0,82
140/M10 50 117610-140 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57 0,57
Dowel for downpipe brackets with thread socket M10
long-shaft dowel for fastening through insulating layers
10/280 25 108900-280 0,67
10/240 25 108900-240 0,62
10/180 25 108900-180 0,52
Objímka pro tvrdé podklady
10/120 25 108900-120 0,52
Screw Pin for downpipe bracket with thread socket M10, self-tapping
300/M10 25 127613-300 1,91
200/M10 25 127613-200 1,70
140/M10 25 127613-140 1,39
80/M10 25 127613-80 0,88
Cap white
universal 25 107800 0,31
sizes packaginginformation
COPPERart.no. price 551 576 601 626 651 676 701 726 751 776
575 600 625 650 675 700 725 750 775 800
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018With 3-points-connection for fast installation.16
Elbow 72°one-piece, tapered
100/72° 25 112410 0,25 10,25 10,50 10,75 11,00 11,25 11,50 11,75 12,00 12,25 12,50
80/72° 25 112430 0,20 9,30 9,50 9,70 9,90 10,10 10,30 10,50 10,70 10,90 11,10
Beaded Elbowfor downpipe runoff
100/72° 25 113110 0,25 15,95 16,20 16,45 16,70 16,95 17,20 17,45 17,70 17,95 18,20
80/72° 25 113130 0,20 15,15 15,35 15,55 15,75 15,95 16,15 16,35 16,55 16,75 16,95
S-Curve tapered
100 10 113605 0,30 19,00 19,30 19,60 19,90 20,20 20,50 20,80 21,10 21,40 21,70
80 10 113620 0,25 17,95 18,20 18,45 18,70 18,95 19,20 19,45 19,70 19,95 20,20
Downpipe Connector100 25 117105 0,15 5,40 5,55 5,70 5,85 6,00 6,15 6,30 6,45 6,60 6,75
80 25 117115 0,10 4,75 4,85 4,95 5,05 5,15 5,25 5,35 5,45 5,55 5,65
Downpipe Junction 72°
100/100-72° 10 117010-100-72 0,50 27,15 27,65 28,15 28,65 29,15 29,65 30,15 30,65 31,15 31,65
100/80-72° 10 117010-80-72 0,50 27,15 27,65 28,15 28,65 29,15 29,65 30,15 30,65 31,15 31,65
80/80-72° 10 117080-80-72 0,45 26,40 26,85 27,30 27,75 28,20 28,65 29,10 29,55 30,00 30,45
Rainwater Pipe Flap with sieve
100 10 117305 0,75 39,85 40,60 41,35 42,10 42,85 43,60 44,35 45,10 45,85 46,60
80 10 117315 0,75 39,85 40,60 41,35 42,10 42,85 43,60 44,35 45,10 45,85 46,60
Pipe Cover with Bead100/115-120 20 116815 0,10 5,55 5,65 5,75 5,85 5,95 6,05 6,15 6,25 6,35 6,45
80/115-120 20 116825 0,10 5,55 5,65 5,75 5,85 5,95 6,05 6,15 6,25 6,35 6,45
sizes packaginginformation
COPPERart.no. price 551 576 601 626 651 676 701 726 751 776
575 600 625 650 675 700 725 750 775 800
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018 With 3-points-connection for fast installation. 17
Gutteraccording to EN 612, bead form II, price per meter
333 134133 0,80 16,05 16,85 17,65 18,45 19,25 20,05
280 134128 0,70 14,00 14,75 15,50 16,25 17,00 17,75
Corneroutside corner 90°, half-round, seamless deep drawn, stabilization through fixed bead, continuous water bend
333/300 5 134405 0,50 16,35 16,85 17,35 17,85 18,35 18,85
280/300 5 134410 0,45 15,85 16,30 16,75 17,20 17,65 18,10
Cornerinside corner 90°, half-round, deep-drawn seamless
333/300 5 134805 0,50 16,35 16,85 17,35 17,85 18,35 18,85
280/300 5 134810 0,45 15,85 16,30 16,75 17,20 17,65 18,10
Gutter Connectorwith bead connector, fixing lock and flexible Z-spring, shape according to DIN 18461
333 10 135805 0,15 6,95 7,10 7,25 7,40 7,55 7,70
280 10 135810 0,10 6,50 6,60 6,70 6,80 6,90 7,00
Gutter Sieveleaf collector for pushing into gutter drain
87-100 25 128410 2,90
75-80 25 128420 2,75
Gutter Stark® Leaf Guard®for halfround gutters, length 200 resp. 100 cm, incl. supports and fixing clips, aluminium with anodization in copper colour or aluminium blank, price per meter
333/2000 20 158505 13,75
280/2000 20 158510 11,40
Gutter Hooklong version, with reinforcing seam, spring/spring
333-30/5+5 10 128605-LANG 4,10
280-30/5+5 10 128610-LANG 3,90
Fascia Hangerfix to the wall, spring/spring, flat to the wall against tilting effect
333 25 128630 2,20
280 25 128635 2,15
Adjustable Unit variable angle for inclination, for dimensions 333, 280, 250
333-250 25 128667 1,00
Gutter Support deep-drawn
333/280/250 100 128790 1,45
Stop Endlarge version, half-round, for horizontal gutter installation, for seaming (both sides)
333 25 136006 0,05 1,38 1,43 1,48 1,53 1,58 1,63
280 25 136011 0,03 1,11 1,14 1,17 1,20 1,23 1,26
Stop Endhalf-round, with rubber sealing, for simple push-on installation
333 25 136705 0,10 3,65 3,75 3,85 3,95 4,05 4,15
280 25 136710 0,09 3,22 3,31 3,40 3,49 3,58 3,67
sizes packaginginformation
TITANIUM-ZINCart.no. price 1751 2001 2251 2501 2751 3001
2000 2250 2500 2750 3000 3250
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018 19
Outletoval, with compass card, reinforced bend, eye and bevel
333/100 25 130015 0,30 8,60 8,90 9,20 9,50 9,80 10,10
280/80 25 130050 0,20 8,55 8,75 8,95 9,15 9,35 9,55
Hoppersquare version, without overflow
100 4 131910 1,40 107,75 109,15 110,55 111,95 113,35 114,75
80 4 131920 1,40 104,30 105,70 107,10 108,50 109,90 111,30
Downpipeaccording to EN 612, price per meter, length 2 rm
100 137910 0,75 16,90 17,65 18,40 19,15 19,90 20,65
80 137980 0,80 14,50 15,30 16,10 16,90 17,70 18,50
Bracketfor downpipe, with thread socket M10 for screw
100/M10 25 127710 2,20
80/M10 25 127780 2,20
Screwfor downpipe bracket with thread socket, yellow chromated (in copper column) and galvanized (in galvanized column), M10
300/M10 25 127610-300 1,80
200/M10 25 127610-200 0,82
140/M10 50 127610-140 0,57
Dowel for downpipe brackets with thread socket M10
long-shaft dowel for fastening through insulating layers
10/280 25 108900-280 0,67
10/240 25 108900-240 0,62
10/180 25 108900-180 0,52
Objímka pro tvrdé podklady
10/120 25 108900-120 0,52
Screw Pin for downpipe bracket with thread socket M10, self-tapping
300/M10 25 127613-300 1,91
200/M10 25 127613-200 1,70
140/M10 25 127613-140 1,39
80/M10 25 127613-80 0,88
Cap white
universal 25 107800 0,31
sizes packaginginformation
TITANIUM-ZINCart.no. price 1751 2001 2251 2501 2751 3001
2000 2250 2500 2750 3000 3250
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018With 3-points-connection for fast installation.20
Elbow 72°one-piece, tapered
100/72° 25 132410 0,25 6,95 7,20 7,45 7,70 7,95 8,20
80/72° 25 132430 0,20 6,70 6,90 7,10 7,30 7,50 7,70
Beaded Elbowfor downpipe runoff
100/72° 25 133110 0,25 13,05 13,30 13,55 13,80 14,05 14,30
80/72° 25 133130 0,20 12,65 12,85 13,05 13,25 13,45 13,65
S-Curve tapered
100 10 133605 0,30 12,70 13,00 13,30 13,60 13,90 14,20
80 10 133620 0,25 12,10 12,35 12,60 12,85 13,10 13,35
Downpipe Connector100 25 137105 0,15 3,40 3,55 3,70 3,85 4,00 4,15
80 25 137115 0,10 3,15 3,25 3,35 3,45 3,55 3,65
Downpipe Junction 72°
100/100-72° 10 137010-100-72 0,45 19,00 19,45 19,90 20,35 20,80 21,25
100/80-72° 10 137010-80-72 0,45 19,00 19,45 19,90 20,35 20,80 21,25
80/80-72° 10 137080-80-72 0,40 18,60 19,00 19,40 19,80 20,20 20,60
Rainwater Pipe Flap without sieve
100 10 137305 0,50 28,75 29,25 29,75 30,25 30,75 31,25
80 10 137315 0,50 28,75 29,25 29,75 30,25 30,75 31,25
Pipe Cover with Bead100/115-120 20 136815 0,10 4,05 4,15 4,25 4,35 4,45 4,55
80/115-120 20 136825 0,10 4,05 4,15 4,25 4,35 4,45 4,55
sizes packaginginformation
TITANIUM-ZINCart.no. price 1751 2001 2251 2501 2751 3001
2000 2250 2500 2750 3000 3250
All prices in €, taxes and duties unpaid, pricelist valid from March 1, 2018 With 3-points-connection for fast installation. 21
INSTALLATION INSTRUCTIONS
Video Installation Instructions
You can find our installation instructions as
video on our homepage or on
www.installation-movie.zambelli.de
Gutter Connector
Gutter Decline
Installation of Gutter Hooks
d ≤ 1000 mmx ≤ 300 mm
Riveting and solderingFor Galvanised Steel Product
1
2
3
4
GluingFor robust Colour Coated Products
For robust Colour Coated Products:Add two lines of Dicht 7 adhesive to cleaned and dried surface at least 8mm from the end of the gutter. Overlap both gutters adequately and fold the rear return back over
Gutter connector with clip for gutters, fit according to DIN 18461
1 2 3
4 5
Lift out the ‘security tab’ (a bead connector is the perfect tool.
Mount the guttter connector to the back edge of the gutter first,and then pull it down and toward the front.
Match the rubber seal to the notch at the rear of theGutter connector, leaving a small tongue to the front.
Hook the ‘claw’ of the gutter connector over the bead and snap it closed while pressing against the inside of the bead. Press closed the security tab with a thumb.
Push the bead connector in up to the fixing point. (Not required for repairs)Leave a 5mm gap between gutters to allow for expansion.
! NEVER USE AN ANGLE GRINDER TO CUT – HEAT DAMAGES ITS SELF-HEALING PROPERTIE !
Drop by 1-5mm/m
22
Installation of Outlet
Seaming Stop End Downpipe connections
Stop End
enlarging downpipe connector
1
3
2
4
1
6 8
4
7 9
53
2
!
Stop end for simple push-on installation. Please insert the rubbersealing with the three lips towards the gutter.
approx.15 mm
approx.15 mm
pipe pliers
23
Half-Round and Box GuttersDIN 18461
Half-Round Gutter (H)d1 and d2 are external dimensions
Form Iroundf = max. 3 mm
Form IIg = round with bend
Half-Round Gutter
size 280 333 400
Material Width
+1/-2 280 333 400
d1 ±1 18 20 22
d2 +2/0 127 153 192
e1 ±1 7 9 9
f1 min. 11 11 11
g ±1 6 6 6
Gutters and Downpipes (Metal)EN 612Picture 1Examples for Gutters
a hight of gutter frontsidec hight of backsided bead size (diameter or width)e gutter opening
Picture 2Bead Forms
Round Downpipes
size 80 100 120
d1 + 1 80 100 120
di = Internal diameter upper end
24
Al Cu St Inox Zn Class X min.
Class Y min.
soldered 5 1
brazed 3 3
folded 6 6
weldeddepending on welding method
overlap in mm
= compatible= incompatible
Table 1: Downpipes, Seams – Execution of Seams
Table 2: Gutters, Bead Diameters and Hight of Gutter Frontside
material width w bead-Ø d
Class X Class Ymin. min.
hight ofgutter frontside
Dimension a accord-ing to image 1min.
sum of bead diameter andhight of gutter frontside
Dimension a + d according to image 1 and image 2min.
w ≤ 200 16 14 40 70
200 < w ≤ 250 16 14 50 75
250 < w ≤ 333 18 14 55 75
333 < w ≤ 400 20 18 65 90
400 < w 20 20 75 100
Al Cu St Zn Pb VA
Al aluminium
Cu copper
St galvanized steel
Zn zink
Pb lead
VA stainless steel
Compatibility of Metals
= compatible= incompatible
Material density 0,50 mm 0,60 mm 0,65 mm 0,70 mm 0,80 mm 1,00 mm
copper 8,93 4,46 kg 5,35 kg 5,80 kg 6,25 kg 7,14 kg 8,93 kg
titanzink 7,12 3,56 kg 4,27 kg 4,62 kg 4,98 kg 5,69 kg 7,12 kg
aluminium 2,70 1,35 kg 1,62 kg 1,75 kg 1,89 kg 2,16 kg 2,70 kg
stainless steel 7,90 3,95 kg 4,74 kg 5,13 kg 5,53 kg 6,32 kg 7,90 kg
galvanized 7,86 3,93 kg 4,71 kg 5,10 kg 5,50 kg 6,28 kg 7,86 kg
Material Weight Calculation
Weights are for 1 m2 surface
Data Chart SizeDIN 18460
surface roof (m2) (m2) downpipe Ø dedicated gutter
0 – 37 60 200 (10tlg.)
37 – 83 80 250 (8tlg.)
83 – 150 100 333 (6tlg.)
150 – 243 120 400 (5tlg.)
243 – 443 150 500 (4tlg.)
25
ZambelliFertigungs GmbH & Co. KGPassauer Strasse 3 + 594481 GrafenauGermany
Telefon +49 85 55 409 - 0Fax +49 85 55 409 - 30E-mail [email protected]
WWW.ZAMBELLI.COM
03/2
018