1
Landa Mobile Systems ® LLCGSA CONTRACT GS-07F-106DA | DUNS 078383329 | CAGE 6NDB6 | SDVOSB | MINORITY OWNED COMPANY | EIN 45-3577583 | NATE MEMBER | SBA CERTIFIED SMALL DISADVANTAGED BUSINESS
Headquarters: 1501 N Starr Dr, Fayetteville, AR 72774 USA | 360.474.8991 | Fax 206.529.4035 Landa MFG Facility: 5432 S. 49th W. Ave | Tulsa | Oklahoma | 74107 | USA | 918.707.5783 Ph. | Fax 918.707.5784
LMS CT 106, is a 106’, C130 transportable, and container ship readPatented Delrin Guide Blocks prevent freeze up, .
Tower
Lattice type telescopic tower
Galvanized steel
106’ standard model
Other sizes available
Includes complete guy wire kit
36” base spread
Lift points for fork lift and helicopterfly in placement
26' - 106' TELESCOPING TOWER
2
Landa Mobile Systems ® LLCGSA CONTRACT GS-07F-106DA | DUNS 078383329 | CAGE 6NDB6 | SDVOSB | MINORITY OWNED COMPANY | EIN 45-3577583 | NATE MEMBER | SBA CERTIFIED SMALL
DISADVANTAGED BUSINESS
Headquarters: 1501 N Starr Dr, Fayetteville, AR 72774 USA | 360.474.8991 | Fax 206.529.4035
Landa MFG Facility: 5432 S. 49th W. Ave | Tulsa | Oklahoma | 74107 | USA | 918.707.5783 Ph. | Fax 918.707.5784
Motor Drive Units
LMS main drive motor is a sealed wash‐down quality unit with direct drive worm gear output with 2 re‐duction gear boxes for a final reduction. More torque than any in the industry.
The system is designed to be fully operated with a cordless drill as redundant safety feature.
This unit is also designed to withstand the most
severe environmental conditions during operation without fail‐ure. The tower system uses 3 seperate cables per section to raise and lower the tower .
LMS Securing Tab is the largest in the industry and by far exceeds the safety requirements with tower loading.
LMS towers are built to withstand more environment extremes than any produced in USA. Tower is manufactured 100% recycled steel.
CT 106, Compact Mobile Communications Unit
TELESCOPIC LATTICE TOWER
106’ telescopic lattice model
100% recycled steel construction.36” super heavy duty base section
120 volt a/c power operation, 60hz
850lb tilt headload, 1500lb Tower load, Hot dipped galvanized finish. Jack stands for leveling, and guy kit for high wind operations.
Limit switches for tilt and extension operation
Weatherproof (locking) control panel
Electric motors switchable power 50/60 hz w/worm drive reduction. Redundant key backup operationCable storage reel
Cable guide rings on each tower section
Aircraft quality lifting cables Patented Derlin Mast Guide Blocks 3ea per section.
3 Sector Antenna Mount included
TRAILER
23' 3” overall trailer length x 7’2” wide, all steel construction
2 5/16" ball hitch standard, adjustable and removable
Curb weight, 8200 lbs, 14,000lbs GVW
Emergency Trailer Breakaway Device
(4) ea two hole 1/0 ground lugs1/4'" 4' X 20" ground bar
(2) ea heavy duty safety chains¼” steel plate floor
2 ea side mounted outriggers with adjustable ground pads
2 ea rear mounted outriggers with jacks
4 ea bubble type trailer level guides4 ea Jack Stands1 ea Tool Secure Lock Tool Box14,000lb torsion independent suspension package (off road package) 2 ea Axles with Electric brakes on each4 ea 10 ply 16” radial tires, with spareSealed beam DOT lighting package and reflective striping.
Shipping Weights and Dims: 27’ 6” long, 7’ 2” wide, 7’5” tall 9200lbs
Optional
Kubota GL7000 Generator Installed on Unit
Generator Fuel 42gal with electric pump
Options include FAA paint scheme (galvanized finish standard)
FAA lighting package
Lightning arrest package
Proximity Alarm
Galvanized finish (blue powder‐coat standard)
3