286863

SPECIFIERS REFERENCE

CEILING and WALL SYSTEMS 1 877 ARMSTRONG (276-7876)- Customer Service Representatives 7:45 a.m. to 5:00 p.m. EST, Monday through Friday - TechLine Technical information 8 a.m. to 5:30 p.m. EST, Monday through Friday FAX 1-800-572-8324 or email: [email protected] - Product literature and samples Express service or regular delivery - Request a personal copy of the Armstrong product catalog armstrong.com/ceilings - Latest product and program news - Real time selection and specification information - Glossary of technical terms - Contacts reps, where to buy, who will install - Submittal pages - Specification writing tool - Literature and samples information - Perimeter and Corridor Design Solutions, CAD rendering armstrong.com/flooring

Featured on our cover: METALWORKS Vector Faceted Extra Microperforated in Effects WoodLooks Cherry Fashion Outlets of Niagara Falls, Niagara Falls, NY Architect: Lauer-Manguso & Associates Architects, Buffalo, NY

CEILING&WALL SYSTEMS

See details inside! This catalog is printed on FSC-certified stock with 10% post-consumer waste using no-VOC, vegetable-based inks. Our printing partner is FSC-certified and uses wind energy.

This catalog is recyclable. For local recycling locations, reference www.earth911.org or call 1-877-EARTH911.

2009 AWI Licensing Company Printed in United States of America CS-3000-109

9

Metal Wood Fabric Translucents Mineral Fiber Fiberglass

2009/10

CEILINGS, SUSPENSION SYSTEMS & WALLS

2009/10

CEILING&WALL SYSTEMSBetween us, ideas become reality.

Armstrong is a global manufacturer of Ceilings, Suspension Systems and Walls. Most products are available worldwide, however, product availability does vary by country and region. Please contact your local US representative and we can work with you to ensure we meet your visual and performance criteria for your global project.

Armstrong Global Sales Offices Telephone and Facsimile NumbersUNITED STATESPortfolio At-a-Glance Ceiling Systems Selector Chart Whats New Intstallation Photo Gallery CANOPIES & CLOUDS Formations Acoustical Clouds Infusions Accent Canopies Serpentina Serpentina Waves Serpentina Vault Soundscapes Acoustical Canopies Soundscapes Shapes Acoustical Clouds MetalWorks Custom Canopies WoodWorks Custom Canopies METALWORKS MetalWorks At-a-Glance MetalWorks Standard products MetalWorks Custom Products WOODWORKS WoodWorks At-a-Glance WoodWorks Standard Products WoodWorks Custom Products ALTERNATIVE MATERIALS Filaments Fabric Panels Infusions Lay-in Panels Lineage Laminate Plank Ceilings Metaphors Coffers MINERAL FIBER/FIBERGLASS Mineral Fiber / Fiberglass At-a-Glance Mineral Fiber / Fiberglass Products INTEGRATED CEILING SYSTEMS TechZone Integrated Ceiling System i-ceilings Sound and Wireless SystemsAbove: Serpentina with Custom Color

3-4 5-6 7-8 9-14

Phone: Fax:

(877) 276 7876 (800) 233 5598

CANADAPhone: Fax: (877) 276 7876 (866) 321 5566

FRANCE, ITALY, SPAIN AND PORTUGAL AND EXPORT TO FRENCH-SPEAKING AFRICA Phone: +33 1 43904500 (switchboard) MSC Italy: Phone: Fax: MSC Spain: Phone: Fax: +39 2 662 27650 +39 2 66201427 +34 91 642 0499 +33 1 4521 0411

GERMANY MSC Germany: +49 251 760 3210 Fax: +49 251 760 3593 AUSTRIA Phone: Fax: SWITZERLAND Phone: Fax: +43 (0) 5522 34440 +43 (0) 5522 34448 +41 71 3136363 +41 71 3136400

CHINA Beijing Phone: Fax: Guangzhou Phone: Fax: Hong Kong Phone: Fax: Shanghai Phone: Fax: MALAYSIA Phone: Fax: SINGAPORE Phone: Fax: TAIWAN Phone: Fax: THAILAND Phone: Fax:

(86) 10 6517 1061 (86) 10 6510 2821 (86) 20 8375 3862 (86) 20 8375 3861 (852) 2585 7800 (852) 2598 7113 (86) 21 6391 3366 (86) 21 6391 2021 (60) 1 2345 7993 (60) 3 8942 1363 (65) 6358 1083 (65) 6358 1084 (886) 2 2786 7258 (886) 2 2768 4082 (66) 6848 1144 (66) 2915 0283

MEXICO15-18 19-22 23-24 25 26 27 28-30 31 32Phone: Fax: 52 55 55706406 52 55 55706410

AFRICA & MIDDLE EASTPhone: Fax: +44(0) 1895 202060 +44(0) 1895 272928

EUROPECENTRAL EUROPE AND BALTICS Phone: +48 223 378610/8611 Fax: +48 223 378612 EASTERN EUROPE Phone: +7 495 9565100 Fax: +7 495 9565101

MSC France: +33 1 439 04515/4516/4550 MSC CES Phone: +33 1 43904540 Fax: +33 1 45210411 French-speaking Africa: Phone: +33 1 439 04521 Fax: +33 1 452 10411 GERMANY/AUSTRIA & SWITZERLAND Netherlands Phone: +31 7 65217733 Fax: +31 76 521 0407 MSC Belgium & Luxembourg Phone: +32 2 223 0072 Fax: +31 76 521 0407

UNITED KINGDOM Phone: +44 1895 202067 Technical: 0800 371849 (toll free) Fax: +44(0) 189 5274287

ASIA PACIFIC/AUSTRALIAAUSTRALIA Brisbane (QLD/NT) Phone: (617) 3 272 0533 Fax: (617) 3 272 0690 Melbourne (VIC/TAS) Phone: (613) 9 580 9633 Fax: (613) 9 587 5139 Sydney (NSW) Phone: (612) 9 748 1588 Fax: (612) 9 748 7244

33-38 39-54 55-58

59-62 63-68 69-72

Printing this catalog using green production practices is something we can all feel good about.

73-74 75 76 77-78Saved 204.6 million BTUs, enough to power 2 households for one year. Eliminated 9 tons of landfill waste, as much as 3,000 car tires. Eliminated 53,471 lbs of greenhouse gas, as much as driving 5 cars for one year. Saved 1.07 million gallons of potable water, more than 10,000 loads of laundry. Saved 43 tons of virgin fiber, as much as 296 trees.

79-82 83-178

179-183 184-186

This catalog is printed on FSC-certified stock with 10% post-consumer waste using no-VOC, vegetable-based inks. Our printing partner is FSC-certified and uses wind energy.

E INT PR

D US IN

G

Se r

IN

pen tina

els Pan with Dia mond Louver

1

Accents, Armatuff, Armstrong, Axiom, Between Us Ideas Become Reality, BioBlock, Capz, Ceramaguard, Cirrus, Cirrus Borders, Cirrus Open Plan, Cirrus Profiles, Cirrus Themes, Classic Step, Cortega, Critters, Dune, Durabrite, Ekos, Ferns, Filaments, Fine Fissured, Finetex, Fire Guard, Formations, Graphis, Green Genie, Grid Accents, HumiGuard, i-ceilings, Infusions, Interlude, Knife Edge, Latitudes, Leaves, Ledges, Lineage, MetalWorks, Metaphors, Optima, Painted Nubby, Peakform, Prelude, Random Fissured, Rustex, Second Look, Seismic Rx, Serpentina, Shasta, ShortSpan, Sticks, Stones, QuikStix, Silhouette, Sonata, SoundScapes, Soundsoak, Superlock, Suprafine, TechLline, TechZone, Terrain, Things That Fly, Tincraft, Traces, Trimlok, Tundra, Ultima, Vector, WoodWorks, and XL are trademarks of AWI Licensing Company.

D ENER

TechLineSM 877 ARMSTRONG

armstrong.com/ceilings

Mylar is a registered trademark of DuPont LEED is a registered trademark of the U.S. Green Building Council

G

Y

W

Call us!1 877 ARMSTRONG (276-7876)

Search us!armstrong.com/ceilings Use key words to get current information fast! Search: TechZone

TechLineSM The answers you need...fast!

Calculate! Swatch It! Visualize!armstrong.com/greengenie armstrong.com/swatchit armstrong.com/invision Online tools to make LEED calculations efficient and easy and improve visualization

SUSPEN SION SYSTEMS Suspension Systems Selector Chart Suspension Systems At-a-Glance Standard Suspension Systems Moldings Exposed Tee System Accessories Ceiling/Suspension Interface Drawings TRIM & TR ANSITIONS Axiom Trim At-a-Glance Axiom Trim Products DRYWALL SYSTE MS Drywall Systems At-a-Glance Drywall Systems Products Drywall Systems Accessories WALLS Walls At-a-Glance Optima & Painted Nubby Wall Panels Soundsoak Wall Systems WoodWorks Ekos Wall Systems Custom Soundsoak Wall Systems Custom Wood Wall Systems

187-188 189-190 191-204 205 206-207 208-210

211-212 213-224

225 226-230 231-323

SU STAI N AB L E DE SI G N Our Commitment to the Environment GreenGenie - online LEED Calculator LEED Credits & Armstrong Systems Contribution Ceiling Recycling Program Sustainability/LEED Selector Chart High Light Reflectance Ceilings High Light Reflectance Ceiling Selector Chart No Sag, Antimicrobial, and Low/No-added Formaldehyde Ceilings No Sag, Antimicrobial, Low/No-Added Formaldehyde Ceiling Chart Durable Ceilings Durable Ceilings Selector Chart SAFE DE SI G N Fire Resistive Ceilings Fire Resistant Ceiling Selector Ceiling Design and Seismic Performance Seismic Performance Selector Chart ACOU STI CAL DE SI G N Key Acoustical Attributes Speech Privacy for Offices and Healthcare Speech Intelligibility for Schools Acoustic Ceiling Selector Chart Warranty Item Index & Service Categories Alphabetical Index Global Sales Offices

Table Of Contents

243 244 245-247 248 249-250 251 252 253 254 255 256

233 234 235-236 237-239 240 241-242

257 258 259 260

261 262 263 264 265-268 269-272 273 Inside Back Cover

Formations Shapes Clouds

2

Portfolio At-a-GlanceCeiling SystemsStandard 2' x 2' Panels Standard 2' x 2' Panels with Grid-hiding Edges Non-standard Sizes Planks Radial/Trapezoid Shapes

MetalWorksMetalWorks Tegular Pgs. 39-41

MetalWorks Vector Pgs. 43-44

MetalWorks Custom Pgs. 55-58

MetalWorks Linear Pgs. 47-48

MetalWorks Custom Radial Pg. 57

WoodWorksWoodWorks Tegular Pgs. 63-64

WoodWorks Vector Pgs. 65-66

WoodWorks Custom Pgs. 69-72

WoodWorks Linear Pgs. 67-68

WoodWorks Custom Radial Pgs. 69-72

Mineral FiberUltima Square Lay-in & Tegular Pgs. 169-172

Ultima Vector Pgs. 173-174

Ultima Tegular Small Sizes Pgs. 171-172

Ultima Plank Pgs. 175-176

FiberglassOptima Square Lay-n & Tegular Pgs. 139-142

Optima Vector Pgs. 147-150

Optima Large Size Pgs. 143-146

Optima Plank Pgs. 151-152

Optima Radial Pgs. 145-146

Alternative MaterialsFilaments Pgs. 73-74

3

Infusions 2' x 2' Lay-in Panels Pg. 75

Metaphors Pgs. 77-78

Lineage Wood Looks Pg. 76



Ceiling & Wall SystemsCanopies Clouds Exposed Structure Acoustical Solutions Integrated Systems And Even More Metal!

Portfolio At-a-Glance

MetalWorks Canopies Pg. 31

Serpentina Waves Pg. 25

MetalWorks Vector Pgs. 43-44

MetalWorks Tin Pgs. 53-54

WoodWorks Custom Canopies Pg. 32

WoodWorks Custom Curved Pgs. 69-72

WoodWorks Tegular Pgs. 63-64

MetalWorks Mesh Pgs. 49-50 Wall Systems

MetalWorks Open Cell Pg. 51

SoundScapes Canopies Pg. 27

Formations Clouds Pgs. 15-18

Ultima Tegular Pgs. 171-172

TechZone Ceiling System Pgs. 179-183

Soundsoak Walls Pg. 235-236; 240

SoundScapes Shapes Pg. 28-30

Optima Capz Pgs. 153-154

TechZone Ceiling System Pgs. 179-183

WoodWorks Ekos Walls Pgs. 237-239

Infusions Accent Canopies Pgs. 19-22

Formations Clouds with Filaments Panels

i-ceilings Sound/Wireless Systems Pgs. 184-186

WoodWorks Custom Walls Pgs. 241-242


4

Ceiling Systems SelectorElectronic Selector Tool: armstrong.com/selectorPANEL SIZEProduct information listed in this chart pertains to general product families, and may not apply to each individual product item. Before specifying or purchasing products, consult product details at www.armstrong.com. Armstrong products are sold subject to limited warranties; full copies of the applicable warranty are available by calling 1 877 ARMSTRONG. * Check with your local Armstrong representative. Can be recycled in some areas.

Look for this icon indicating new products or new additions to product families. Visit our web site for details.

GRID FACETegular (Revealed)

EDGE PROFILEConcealedClassic Step, Chamfered, BeadedG

Square Lay-in

20 x 5 30 x 5

1 x 1 Concealed

2 x 6 2 x 8

Beveled Tegular

2 x 6 2 x 8

Square Tegular

Accent Shapes

Angled Tegular

Square Lay-in

4 x 4 4 x 8

Beveled K4C4

Custom Sizes

Square K4C4

Other Sizes

Other Sizes

Concealed

30 x 30

30 x 30

20 x 5

15/16

1-1/2

GENERAL APPLICATION Mineral FiberCIRRUS/Second Look/Profiles CORTEGA / CORTEGA Second Look DUNE /DUNE Second Look ENDURA FISSURED GEORGIAN LATITUDES/LEDGES MESA NATURAL FISSURED SANSERRA STRATUS TERRAIN TUNDRA ULTIMA ARMATUFF Ceramaguard FINE FISSURED CIRRUS Open Plan & High CAC Clean Room MYLAR/VL & VL FINE FISSURED High NRC / CAC FINE FISSURED Open Plan MESA High CAC OPTIMA Open Plan OPTIMA for TECHZONE PAINTED NUBBY Open Plan PEBBLE School Zone FINE FISSURED SHASTA / RANDOM FISSURED SOUNDSCAPES ULTIMA Open Plan ULTIMA for TECHZONE 85-88, 95-98 105-108 109-114 115 125 127-128 133-134 135-136 137 158 163 164 168 169-176 83 84 85-90 103-104 117-126 121-122 135-136 138-152 179-183 155 156 159 157, 160 27-30 177-178 179-183G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

FINE FISSURED /Second Look 116-120, 123-124

SPECIAL PERFORMANCE Mineral Fiber and FiberglassG G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

ACCENT PATTERNS & ALTERNATIVE MATERIALSCIRRUS Borders/Motifs/ Themes 91-94, 99-102 GRAPHIS Rustex FLUMES FILAMENTS Fabric Panels GRAPHIS Finetex INFUSIONS Canopies & Panels LINEAGE Wood Looks STICKS & STONES TINCRAFT TRACES 131-132 126 73-74 129-130 19-22, 75 76 161-162 165-166 167G G* G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G

METALWORKS & WOODWORKSMETALWORKS Tegular METALWORKS Vector WOODWORKS Tegular WOODWORKS Vector 39-41 43-44 63-64 65-66 * Canopy Tongue and GrooveG G G G G G G G G G G

5



Vector

2 x 5

1 x 2

2 x 2

2 x 4

4 x 4

2 x 2

2 x 4

9/16

Acoustical PerformanceHigh Acoustical Performance

Fire PerformanceFire Guard Fire Resistive A = Class A, indicating a flame spread of 25 or under and smoke developed of 50 or under

HumiGuard Humidity ResistanceSag Resistance S - Standard 4 drops / HumiGuard Max 3 drops / HumiGuard Plus

Anti-Microbial ProtectionBioBlock Plus contains an antimicrobial treatment and provides guaranteed resistance against growth of mold/mildew and gram-positive and gramnegative odor/stain-causing bacteria for 30 years.

Durability Soil Resistance Scrubbability Washability Scratch Resistance Impact Resistance

RecyclingPart of Armstrong Recycling Program

Light ReflectanceHigh Light Reflectance

Relative Installed Cost5 $s/highest pricing 1 $/lowest pricing

TEXTURE

VISUAL

COLOROther Colors/Finishes

SUBSTRATEHigh Light Reflectance

PERFORMANCE CRITERIAPERM FOR A

SPECIAL PERFORMANCEAcoustics

Maintainability Durability

Auditorium / Church

Scratch Resistance

AR AN T

Shower or Locker Areas

EE

30 year

E NC

Exterior: Soffit, etc.

10 Year Availability

Impact Resistance

BioBlock/Inherent

GU

Fire Performance

Food Preparation

Open Plan Office

VOC No Added

Design Patterns

Sag Resistance

High Acoustical

Soil Resistance

Installed Cost

Mineral Fiber

Scrubbability

Clean Room

Gymnasium

Washability

Recyclable

Tech Black

Laboratory

Classroom

Fiberglass

Ceiling Systems Selector

Wireless

Squares

Medium

Smooth

Coarse

Planks

Sound

White

Metal

Wood

Fine

G G G G G G G G G G G G G G G G

G G G G G G G G G G G G G G G G

G G G

G

G G G G G

G

G G G G

G

G G G G G G G G G G

$$-$$$+ $ $-$$ $-$$$+ $-$$$+ $ $ $$+-$$$ $+ $$+-$$$+

S

G G

AG G

G

G

G G G

G

G

G G G G G G G

S

G G G G G G G G G

G

G

G G G G G G G G G

A A A A A A

S

G G G

S S S S

G G G

$$$-$$$+ $$+ $$$

G G G G

G G G G G G G

$+ $$-$$$ $$G

A

G

G

G

G

G

G G

G G G G G G G G G G G G

G G G G G G G G G G G G G G G G G G G G

G

G

G G G G

G G

G G

I A

G G G G

G

$$+ $$+ $$+

G G G G G G G

G

G G G G G G G G G G G G

G

G

G G

G G G G G G G

$-$$ $$+ $+

A A A A A A A A A A A I I I I I

G G G G G G

G G

G G

$$$-$$$$+ $$$-$$$$+ $$$ $+ $$ $ $$$$$ $$+

G

G

G G G G

G

* * *

G G G G G G G

G

G G G G G

G

G

G G

G G

G G

G G

G G

G G

G

G G

$$$ $$$+ $$$+ $$$$ $$$$+ $$$+ $$$-$$$$

G G G

G G G G G G G

G

G G G G G G

G G G G G

A A A A A

S

G

S S S

G

G

G G G

G

G G G

G

G G

G

G G

G G G G G G

G

G G

G G

$$$ $$$ $$$$-$$$$+ $$$

G G G

G G G G G G

A A A S SG

G G

G G G G

G G

G G G G

G G G G

A A A A

G G

G G

G G G

$$$$$ $$$$$ $$$$$ $$$$$

Armstrong 30-year System Performance GuaranteePERM FOR A

AR AN T

EE

30 year

We stand behind our ceiling system performance with a 30-year guarantee that: Armstrong HumiGuard ceiling systems will resist visible sag Armstrong BioBlock Plus ceiling systems will resist the growth of mold/mildew and bacterial growth

This guarantee also applies to Armstrong ceiling products that are formulated to inherently resist the growth of microorganisms: Ceramaguard, Optima Open Plan, Painted Nubby Open Plan and Vinylfaced Fiberglass ceiling products.

(Applies only when Armstrong Commercial suspension systems and Armstrong Commercial ceiling products are installed and used together.)

E NC

GU


6

CANOPIES AND CLOUDS

INFUSIONS Graphix Whimsical designs and color combinations added to our popular accent canopies Pgs. 19-22

METALWORKS Canopies Define and accentuate spaces with the sleek look of metal canopies Pg. 31

SERPENTINA Waves Our 3-dimensional curved cloud now also in kits! Pg. 25

See your choice of metal or wood finish and perforations. armstrong.com/swatchit

WOODWORKS Custom Walls High impact design; acoustical options Pgs. 241-242

WOODWORKS AND METALWORKS

BUILDING PERIMETERSMETALWORKS Tin 32 patterns 5 colors Pgs. 53-54 AXIOM BUILDING PERIMETERS Pre-engineered trim system helps you achieve consistent perimeter finishing Pgs. 213-215

7

NEW SIZE/DESIGN OPTIONS

ULTIMA Plank Pgs. 175-176

Whats New

ACOUSTICAL SOLUTIONS FOR EXPOSED STRUCTURESSTICKS Pg. 161 STONES Pg. 162 FLUMES Pg. 126 GRAPHIS Dots & Squares Pgs. 129-130 ACOUSTICAL ENHANCEMENTS OPTIMA Capz A new and innovative acoustical solution for noisy exposed structure spaces Pgs. 153-154

WOODWORKS FSC The only commercial wood ceiling thats FSC Certified, no-added urea-formaldehyde and Class A Fire rated! Contact TechLine for details.

Calculate LEED Credits for Armstrong Ceilings and Walls in minutes! armstrong.com/greengenie

SUSTAINABLE DESIGN

HIGH RECYCLED CONTENT CEILING & GRID SYSTEMS Cirrus pgs. 85-102 Ultima pg. 171-172

Tierra CeilingsThe natural choice for commercial ceilings, made with natural jute fiber! Rapidly renewable; Class A Fire, BioAcoustic substrate.

COMING IN 2009!

8

WOODWORKS Linear^^ Faceted in Natural Variations Beech, Tim Hortons TDL Group Corp., Oakville, ON Tim Hortons Store Design Department, Oakville, ON Pages 67-68

9

Photo Gallery

METALWORKS DH700 Custom^^ Faceted Ceiling System Microperforated in Custom Colors Siesta Key Blue, Atlantis Blue and Dahlia Blue Lyman Elementary School, Lyman, SC McMillan Smith & Partners Architects, PLLC, Spartanburg, SC Pages 43-44

METALWORKS Vector

^ ^

Microperforated in White with Suprafine Grid and AXIOM custom trim University of Tampa, Stadium Center, Tampa, FL Krenker Architects, Inc., Tampa FL Pages 43-44

10

OPTIMA Vector^^ 2 x 2 with Axiom Knife Edge and Prelude XL Anchor Bank, branch of Anchor Farmington Bank, N. A., Burnsville, MN Mohagen/Hansen Architectural Group, Wayzata, MN Pages 147-148, 218, 199

INFUSIONS Accent Canopies/ 360 Painted Grid

Infusions 2 x 6 in Saffron Energy and Sage Happiness, 360 Painted Grid in Custom RAL 1033 Northern Kentucky University, Student Union, Highland Heights, KY Omni Architects, Lexington, KY Pages 19-22, 75

11

^ ^

Photo Gallery

METALWORKS RH215 Custom^^ Faceted Ceiling System in Silver Grey with Custom Perforation RV 4058, WOODWORKS Custom Wall System in Beech University of Florida, Phillips Center for the Performing Arts, Gainesville, FL Flad Architects, Gainesville, FL Pages 57, 243-244

12

WOODWORKS Vector^^ 1 x 4 Perforated in Quartered Walnut veneer with custom stain University of Tampa, Stadium Center, Tampa, FL Kreher Architects, Inc., Tampa, FL Pages 65-66

SOUNDSCAPES Shapes

Acoustical Clouds, Circle, panels in Pale Lemon, Zionsville High School, Zionsville, IN Fanning Howey, Indianapolis, IN Pages 28-30

13

^ ^

Photo Gallery

SOUNDSCAPES Shapes

^^ Acoustical Clouds, Concave and Convex panels in White and Moss Zionsville High School, Zionsville, IN Fanning Howey, Indianapolis, IN Pages 28-30

14

FORMATIONS Squares and CurvesAccent & Acoustical Clouds

Formations Curves with Ultima Vector Panels and Axiom for Formations Vector 2, 4 and 6 Trim

Formations Squares with Filaments 2 x 2 fabric panels and Metalworks Mesh Square Weave Panels (Center)

Key Selection Attributes Acoustical absorbency or accent options in an easy-to-specify, detail and install cloud system Ideal for acoustically-challenged or open plenum spaces in initial design or as a quick fix Clouds: reduce acoustical reverberation time in the space reduce noise levels in the space increase speech intelligibility Clouds appear to float Layouts and sizing for full-size panel installation Standard components for custom look Formations Axiom Suspension and Perimeter Kits Axiom, made from extruded aluminum, offers better registration, handle-ability and finished appearance vs. standard cold-rolled steel Axiom for Vector maintains a clean 1/4 Vector reveal at the perimeter Combines the StrongBack mounting system with a sleek, strong aircraft cable system to recess the cable 2 feet away from the vertical face of the cloud, for a clean, contemporary visual requiring fewer suspension hangers Tested for seismic installations Suspension Kits include: Axiom Trim cut to length with factory-mitered corners Unique Axiom for Formations StrongBack carrying channel Prelude grid components, cut to length Appropriate amount of Axiom Splices and T-bar connectors Aircraft cable, cut to 10 length for attachment to structure

Ty p i c a l A p p l i c a t i o n s Exposed structure areas Lobbies, Reception areas Hospitality and Retail

15


armstrong.com/formations

Recycled Content:

FORMATIONS Squares and CurvesAccent & Acoustical CloudsEasy to create custom-look clouds!1) Select cloud size (below) 2) Select ceiling panel type, design and color (pg. 16-17) 3) Select Axiom profile type and height (pg. 17) 4) Select color of grid and Axiom Trim (pg. 17) 5) Specify suspension kits and panels (pg. 18) Please Note: All panels are not available for all shapes. See page 18 for details.

70-80% Ultima 70-75% Optima 25-50% MetalWorks

Step 1: Select your cloud size and shape Curves Squares

6' Circle

6' x 8' Oval

6' x 10' Oval

6' x 12' Oval

6' x 6'

6' x 8'

6' x 10'

6' x 12'

6' x 14' Oval

8' Circle

8' x 8' Rounded Square


6' x 14'

8' x 8'

8' x 10'

8' x 12'





8' x 14'

10' x 10'

10' x 12'

10' x 14'

Canopies & Clouds





12' x 12'

12' x 14'

14' x 14'

Step 2: Choose your ceiling panel type and color Accent CloudsINFUSIONS 2' x 2' lay-in panels (product page 75)

Blue Linen 5922TBL

Natural Linen 5922TNL

Silver Orbit 5922TSR

White Circlets 5922TWC

Chalk Folio 5922TCF

Crystalline Focus 5922TCR

Peace Blue 5922TPB

Clear Arbor 5922TCA4

METALWORKS Mesh 2' x 2' Lay-in Panels (product pages 49-50)

1Cell Item 6131

2Cell Item 6132

Linear Weave Item 6128

Square Weave Item 6129

Lattice Item 6136

Scallops Item 6137

Trellis Item 6138

Cascades Item 6139


16

FORMATIONS Squares and CurvesAccent & Acoustical CloudsAccent CloudsFILAMENTS 2' x 2' Tegular fabric panels (product pages 73-74) NITRO ULTIMA /OPTIMA Tegular and Vector (product pages 141-150; 171-174)

Tonic 4755

Spritzer 4756

Gingerale 4757

Crystal 4759

Cream Soda 4758

White (WH)

ANCHORAGE (Additional colors available as specials. Minimum order quantity 520 SF)

Slate 4749

Angora 4751

Goose 4752

Birch 4754

Wolf 4750

Vanilla 4753

NETWORK

METALWORKS Square Tegular and Vector (product pages 40-44)

Horizon 4760

Frost 4761

Powder 4762

Sunbeam 4764

Putty 4763

Microperforated

Extra Microperforated

LIDO

Cape May 4746

Oak Bluffs 4747

Hermosa 4745

Huntington 4748

Due to printing limitations, color may vary from actual product. For color coordination recommendations, please visit armstrong.com/formations

S t e p 3 : S e l e c t A x i o m P r o f i l e Ty p e & H e i g h tFormations Axiom Profile Options for Square Clouds Formations Axiom Profile Options for Curved Clouds

Vector panel with Axiom Vector Trim (available in 2", 4" and 6" heights)

Tegular panel with inverted Axiom Vector Trim (available in 2", 4" and 6" heights)

Tegular panel with Axiom Knife Edge for Vector Trim

Vector panel with Axiom Knife Edge for Vector Trim

2" Axiom Vector Trim



S t e p 4 : S e l e c t C o l o r o f A x i o m Tr i m Standard Grid ColorsDue to printing limitations, shade may vary from actual product.

White * (WH)

Cream (CR)

Haze (HA)

Vanilla (VA)

Camel (CM)

Oyster (YS)

Platinum (PL)

Adobe (AD)

Silver Grey (SG)

Gun Metal Grey (MY)

Slate (ST)

Wolf (WK)

Tech Black (BL)

Carbon (CB)

Burnished Copper (BC)

Copper Black Texture (CT)

Forged Iron (FR)

Graphite (GR)

Mica (MC)

Nickel (NK)

Pewter Luster (PR)

Silver Slate (SV)

Steel Luster (SR)

Textured Carbon (TC)

* Axiom Formations Knife Edge available in White only.

17


armstrong.com/formations

FORMATIONS Squares and CurvesAccent & Acoustical Clouds

Step 5: Specify Suspension Kits and PanelsAll kit and panel options can be found on-line at armstrong.com/formations in the Formations brochure, CS-3708.

Formations Cur ves Order InformationBased on your cloud size, spefify your suspension kit number, panel kit number and extra panel cartons (if needed) For Example: If you select 6' x 8' oval acoustical cloud, Optima Vector panels kit 3971, and Axiom 2" Vector profile trim Specify: Optima Vector kit 3971, One extra carton of Optima Vector panels 3900 and Suspension Kit #C2VES0608 Trim and Suspension SystemAxiom Profile Height Suspension Kit(Axiom Trim & Suspension System)

Cloud Size

Optima VectorCurves Panel KitKit # 3970 Kit # 3971 Kit # 3972 Kit # 3973 Required Extra Item 3900 2' x 2' Cartons 1 1 1 Kit # 1970 Kit # 1971

Ultima VectorCurves Panel KitKit # 1972 Kit # 1973 Required Extra Item 1920 2' x 2' Cartons 1 1 1

Item # 6 x 8 Oval 2 4 6 C2VES0608 C4VES0608 C6VES0608

Formations Squares Order InformationBased on your cloud size, specify your suspension kit number and panel number For Example: If you select 10' x 14' Accent Cloud, Infusions panels - Chalk Folio Item 5922TCF and 4" Axiom trim Specify: Item 5922TCF Infusions ceiling panels and Suspension Kit #C4VEA1014 Trim and Suspension SystemCloud Size Axiom Profile Height Suspension Kit(Axiom Trim & Suspension System)

Optima Vector Panels

Ultima Vector Panels

Optima PanelsItems 3250, 3354, 3253

Ultima Tegular Panels

MetalWorks Vector Panels

MetalWorks PanelsItems 9685U6A2, 96825U6A2, 4704U6A2

Filaments Panels

Infusions Panels

Item #

Item 3900

Ctns

Item 1920

Ctns

Ctns

Item 1911

Ctns

Items 9420U6A2, 2118U6A2

Ctns

Ctns

All Items

Item 5922Ctns (with color suffix)

Ctns

2 Vector 10 x 14 4 Vector 6 VectorKnife Edge Tegular Knife Edge Vector

C2VEA1014 C4VEA1014 C6VEA1014 CKETA1014 CKEVA1014

3 3 3

3 3 3

2 2 2 2

3 3 3 3

4 4 4

3 3 3 3

4 4 4 4

6 6 6 6

Canopies & Clouds

3

3

4

These items use Formations Axiom Vector Trim (inverted).

Physical DataMaterial Mineral Fiber, Fiberglass, Light-transmitting Polycarbonate and Metal. Surface Finish Smooth for all but Filaments, which is woven fabric. Acoustics Panels made from mineral fiber, fiberglass and perforated metal offer specific Sabin contributions in providing Sound Absorption. Formations Acoustical Clouds provide greater sound absorption than a continuous ceiling of the same surface area because sound is absorbed from front and back surfaces. The more live the space, the greater the effect on reverberation time from the addition of clouds. Recycled Content Mineral Fiber 70-80%, Fiberglass 70-75% and Metal 25-50%. Suspension System/Perimeter Treatment Axiom for Formations is an integrated Suspension and Trim System, designed exclusively for Formations Accent and Acoustical Clouds. There is a choice of a 2", 4" or 6" profile height or Knife Edge perimeter treatment. Warranty Refer to warranty information in the back of this catalog. Fire Performance Formations, as with other architectural features located in the ceiling plane, may obstruct or skew the existing or planned fire sprinkler water distribution pattern, or possibly delay the activation of the fire sprinkler or fire detection system. Consult a fire protection engineer, NFPA 13, and local codes for guidance on the proper installation techniques where fire detection or suppression systems are present.

Design ConsiderationsThere are several panel design options, from Infusions to MetalWorks, to Filaments fabric-covered panels to Ultima and Optima panels. Choose from three Axiom trim profiles. Formations Acoustical Clouds should only be installed on a horizontal plane. They are not approved for exterior use.

Installation ConsiderationsInstallation is easy with our Axiom Trim and Suspension Kit which features our StrongBack cable mounting system. Thats why Formations Clouds appear to float. Always install Formations Accent and Acoustical Clouds in accordance with applicable building codes and regulations.

Seismic RestraintBuilding codes may require lateral restraint in certain locations. Such lateral restraints are not included. Please consult your local building code for specific requirements.


18

INFUSIONS Accent Canopies

Key Selection Attributes Canopies can be used to define spaces, accentuate an area, provide focus, create ceiling artwork Graphix canopies offer 30 fun and flavorful design and color options Mix & match sizes, shapes, patterns, prints A quick and easy way to introduce color and design to a space using standard components Wide variety of applications, ranging from high-profile corporate interiors to upscale retail environments Large-size 4' x 10' canopies in five channeled polycarbonate colors 5/8" thick panels are designed with 48" long extrusions which integrate with standard size linking kits for configuration with smaller panels For information about Infusions 2' x 2' Lay-in panels, see page 75.

Ty p i c a l A p p l i c a t i o n sHigh visibility and focus areas, including: Hospitality Retail Education Office Healthcare Lobbies/atriums Exposed structure areasInfusions Accent Canopies, Graphix Branches in Black/White

Color Selection Channeled4' x 10'

Due to printing limitations, shade may vary from actual product.

2' x 5', 2' x 6'

Channeled Mist (CHT)

Channeled Caribbean (CHC)

Channeled Midnight (CHM)

Channeled Sunset (CHS)

Channeled Fire (CHF)

Channeled Mist (CHT)

Channeled Caribbean (CHC)

Channeled Midnight (CHM)

Channeled Sunset (CHS)

Channeled Vision (CHV)

Channeled Intellect (CHN)

Channeled Fire (CHF)

Solids2' x 5', 2' x 6'

Cultured Pearl (TCP)

Inspiration Ice (TNC)

Calm Water (TCW)

Natural Faith (TNF)

Loyalty Latte (TLL)

Sage Happiness (TSH)

Budding Creativity (TBD)

Tranquility Teal (TTT)

Caribbean Renewal (TAR)

Peace Blue (TPB)

Midnight Dream (TMD)

Blueberry Bliss (TBB)

Goodness Grape (TGG)

Saffron Energy (TSE)

Sedona Spirit (TSS)

Red Fire (TRF)

Cinnamon Sanity (TCS)

Channeled, Solids and Patterns are also available in custom-sized decorative flat sheets. Excludes Graphix and Alloy. For more information, contact Architectural Specialties at 877 ARMSTRONG and select options 1-1-4.

Patterns2' x 5', 2' x 6'

Alloy2' x 5', 2' x 6'

Clear Arbor (TCA)

Crystalline Focus (TCR)

Crystalline Silverado (TSV)

Crystalline Sky (TSY)

Blue Arbor (TBA)

Indigo Surf (TNS)

Red Arbor (TRA)

Simplicity Alloy (MSA)

Perforated Alloy (MPA)

19


armstrong.com/infusions

INFUSIONS Accent CanopiesGraphix2' x 5', 2' x 6'

Dots

Red/Grape (GDRG)

Teal/Budding (GDTB)

Cinnamon/Blueberry (GDCB)

Side B facing downward Side A Side B Side A Side B Side A Side B

Stripes

Sedona/Saffron (GSSS)

Teal/Latte (GSTL)

Berry/Smoke (GSBS)


Ovals

Teal/Grape (GOVT)

Fog/Steel (GOVF)

Cinnamon/Sterling (GOVC)

Canopies & Clouds


Oars

Latte/Black (GOLB)

Blue/Sage (GOBS)

Cinnamon/Sedona (GOCS)


Branches

Black/White (GBBW)

Bisque/Muslin (GBBM)

Cinnamon/Latte (GBCL)

Side B facing downward Side A NOTE: All Infusions Graphix designs 2009 AWI Licensing Company Two different, but coordinating designs are printed on each side of the Infusions Graphix panels to provide you with 30 distinct visuals. Visit armstrong.com/infusions for additional color coordination information or review data page CS-3910. Side B Side A Side B Side A Side B


20

INFUSIONS Accent Canopies4' x 10' Panel KitsKIT CONTENTS Flat Infusions panel with nominal 4' Aluminum Extrusions (2/panel) attached Cables to form arcs (30 or 50)4 10 50 Arc

2' x 5' and 2' x 6' Panel KitsKIT CONTENTS Flat Infusions panel (1 or 2) with nominal 2' Aluminum Extrusions (2/panel) attached Cables to form arcs (60 or 90)2 5 60 Arc

Panel SelectionItem Number Dimensions Pcs/Ctn Colors

Panel SelectionItem Number Dimensions * Pcs/Ctn Colors

INFUSIONS Accent Canopies54101_ _ _ 54102_ _ _ 4' x 10' x 5/8" 4' x 10' x 5/8" 1 2 5 color options, Pg. 19 5 color options, Pg. 19

INFUSIONS Accent Canopies54051_ 54052_ 54061_ 54062_ _ _ _ _ _ _ _ _ 2' 2' 2' 2' x x x x 5' 5' 6' 6' x x x x 1/4" 1/4" 1/4" 1/4" 1 2 1 2 47 47 47 47 color color color color options, options, options, options, Pgs. Pgs. Pgs. Pgs. 19-20 19-20 19-20 19-20

When specifying or ordering, include the appropriate three-letter color suffix (Ex: 54101CHF)

When specifying or ordering, include the appropriate three-letter color suffix (Ex: 54051TTT, 54061GOVF) * Infusions Alloy canopies thickness (1/8") differs from other 2' x 5' and 2' x 6' canopies (1/4")

Hanging KitsITEM # 7004 Standard 8' Hanging Kit

Linking KitsITEM # 7042 Flush Spacing Kit Links two canopies side-by-side with flush spacing.

Wall & Ceiling KitsITEM # 7006 Escutcheon Kit Used when hanging canopy below an existing ceiling.

7043 1/2" Spacing Kit Links two canopies side-by-side with 1/2" spacing. 7005 Extended Hanging Kit 16' Allows for extended drops from deck and bottom end adjustment of height at panel. 7008 Wall Attachment Kit 7007 3" Spacing Kit Links two canopies side-by-side with 3" spacing. Anchors canopies side-by-side to a wall.

7010 Extended Hanging Kit 30' Same as 7005 above except 30' cables (2).

7044 Single Hinge Linking Kit Links two canopies end-to-end at one side. At least two kits typically needed. 7045 Dual Hinge Flush Linking Kit Links four canopies together end-to-end and flush side-to-side. 7046 Dual Hinge 1/2" Linking Kit Links four canopies together end-to-end and with 1/2" spacing side-to-side.

7009 Wall End Attachment Kit Used at ends when linking single or multiple canopies.

7041 Dual Canopy Hanging Kit Links two canopies end-to-end with one yoked wire to minimize visible wires.

Refer to CS-3908 Infusions Technical Guide for Panel arc details, layout and configuration ideas and kit details at armstrong.com/infusions

NOTE: Accessory kits are compatible with all canopy sizes. If you need assistance identifying what and how many accessory kits are needed for your project, please contact TechLine at 1 877 ARMSTRONG.

7047 Dual Hinge 3" Linking Kit Links four canopies together end-to-end and with 3" spacing side-to-side.

21


armstrong.com/infusions

INFUSIONS Accent CanopiesW a y s Yo u C a n S u s p e n d a n d L i n k I n f u s i o n s A c c e n t C a n o p i e sThe suspension and linking options for Infusions canopies are only limited by your imagination! For a look of some ways you can achieve unique looks, check out our web site or CS-3908 Infusions Technical Guide.

Physical DataMaterial Polycarbonate Surface Finish Smooth Fire Performance Infusions Canopies, as with other architectural features located at the ceiling, may obstruct or skew the planned fire sprinkler water distribution pattern, or possibly delay or accelerate the activation of the sprinkler or fire detection systems by channeling heat from a fire either toward or away from the device. Designers and installers are advised to consult a fire protection engineer, NFPA 13, and local codes for guidance where automatic fire detection and suppression systems are present. Infusions Canopies have been tested according to NFPA 286 and are equivalent to Class A Interior Finish as defined in Chapter 8 of the International Building Code. For proper fire performance, do not install Polycarbonate panels so that any portion of the panel is suspended directly above any portion of an aluminum panel. Aluminum panels are noncombustible. Contact TechLine at (877) 276-7876 for specific US and Canadian fire performance data. Weight; Pieces/Carton PANEL Material 2' x 5' 2pc 2' x 5' 1pc 21 lbs 6 lbs 21 lbs each. 2' x 6' 2pc 50 lbs 14 lbs 50 lbs 2' x 6' 1pc 25 lbs 7 lbs 25 lbs 4' x 10' 2pc n/a 52 lbs n/a 4' x 10' 1pc n/a 26 lbs n/a Aluminum

Design ConsiderationsInfusions Graphix panels have two different, but coordinating designs printed on each side of the panels (sides A and side B). The dominant canopy coloration will change depending on which side faces downward. In addition, it is important to note that the extrusion notches and small factory screw holes can be visible when side B is faces downward. There is just one base item number per Graphic design and color combination, so the installer needs to understand which side has been specified to face downward to achieve the desired effect. Infusions panels should always be installed in accordance with all applicable building codes and regulations. Do not cut holes in or drill through Infusions Accent Canopies. Doing so may cause the panel to bend in an irregular fashion. The lowest point of a suspended Infusions panel should be at least 7'-6" above the finished floor surface. Infusions Canopies are not approved for exterior application. Plastic panels can be damaged by exposure to high temperatures. Panel temperature should not be permitted to exceed 100 F after the tensioning cables have been installed. Follow these guidelines for minimum distance from standard light sources: LAMP TYPE LABEL WATTAGE MINIMUM DISTANCE Halogen FL XL 60 14" PAR 30 Incandescent Bulb 120 15" Quartz Halogen 500 23" Work Light

Canopies & Clouds

Solid Polycarbonate 42 lbs Channeled Polycarbonate 12 lbs Aluminum 42 lbs All accessory kits weigh less than 1 lb

Warranty See warranty details in the back of this catalog. Suspension System Canopy-specific hardware must be ordered based on your design plan. See data page CS-3910 on our web site for details and some design guidelines or contact TechLine at 1 877 ARMSTRONG.

Installation ConsiderationsThe International Building Code requires the attachment of free floating architectural components to be designed for three times the design load. Use the assembled canopy weights provided in this table to select mounting hardware that will meet this requirement: MATERIAL 2' x 5' 2' x 6' 4' x 10' Solid Polycarbonate 21 lbs 25 lbs n/a Channeled Polycarbonate 6 lbs 7 lbs 26 lbs Aluminum 21 lbs 25 lbs n/a Always install in accordance with installation instructions. Do not allow panel edges to get wet.

Seismic Restraint 1The International Building Code allows architectural components to swing freely as long as they will not be damaged or cause damage. Cable lengths less than 20 inches will generate the greatest amount of pendulum reaction during a seismic event, and should therefore be avoided. When it is not practical to use cables greater than 20 inches long allow lateral clearance around the canopies equal to, or greater than, the length of the cable. Canopies suspended from cables greater than 20 inches long will swing no more than 8 inches. Restraint of canopies has proven to be ineffective and is not recommended.1 Pendulum reaction information is based on full scale testing and computer modeling conducted at the Structural Engineering Earthquake Simulation Lab located at the State University of New York at Buffalo

U.S. Patents Pending, including U.S. Publication No. 2004/0182022 Infusions Graphix designs are copyrighted by AWI Licensing Company.


22

SERPENTINA StandardKey Selection Attributes More main beam options for maximum design flexibility; available in both Hills and Valleys with 15/16 or 9/16 face XL butt-cut cross tee end detail for a faster installation Armstrong standard colors plus four metallic paints; and custom colors available Extruded aluminum/hot dipped galvanized steel performance provides maximum corrosion resistance 30-year limited system warranty

Ty p i c a l A p p l i c a t i o n s Corridors and lobbies Conference rooms Reception areas Public access areas Airports, bus terminals and train stations

Serpentina with S500 Perforated Panels in Silver Satin

Color SelectionMetal Infills


White (WH)

Cream (CR)

Haze (HA)

Camel (CM)

Platinum (PL)

Tech Black (BL)

Silver Grey (SG)

Silver Satin (SA)

Gun Metal Grey (MY)

Champagne Gold (CG)

Wolf (WK)

Vanilla (VA)

Slate (ST)

Note: Custom colors available. Diamond Louver and Diamond Sheer panels are available in Bright Clear Anodized only.

Serpentina Components___H/V Main Beam (15/16", 9/16") SJMS Serpentina J Molding for shallow radius (7.5, 15, 22.5, 30, 37.5 and 45) Serpentina J Molding for tight radius (45, 52.5, 60, 75 and 90) Serpentina StrongBack System AX-SPT-HDC Serpentina Trim Hold Down Clip Serpentina Clear Hold Down Clip

SPTB7328

2 ' Prelude Cross Tee (15/16") 2 ' Suprafine Cross Tee (9/16") 1'-12' Straight Trim

SJMT

SPTCHDC

SPTB7520

SERPENTINA SEMI-CONCEALED COMPONENTS Speed Clip Serpentina SemiConcealed Splice Clip (3 per panel interface) Serpentina Semi-concealed Connector Cross Tees

____

SPTSTR

SPTOSCP ___ H/V PT Curved Trim AXCCLT

Serpentina Outside Corner Post Serpentina Trim Clip Splice Plate

SCXT24MR SCXT24SPT SCXT24SPT2

U.S. and Foreign Patents: 6,763,642

SPTSPLICE

23


armstrong.com/serpentina

Recycled Content:

SERPENTINA Standard

35% Steel 25% Aluminum

Serpentina Metal Infill Panels

Serpentina Main Beams and Curved Perimeter Trim Part # 10075 H/V 1015 H/V 10225 H/V 1030 H/V 10375 H/V 1045 H/V 10525 H/V 1060 H/V 1075 H/V 1090 H/V 8075 H/V 815 H/V 8225 H/V 830 H/V 8375 H/V 845 H/V 8525 H/V 860 H/V 875 H/V 890 H/V 6075 H/V 615 H/V Arc 7.5 15 22.5 30 37.5 45 52.5 60 75 90 7.5 15 22.5 30 37.5 45 52.5 60 75 90 7.5 15 Chord Length 9 11-15/16 9 11-13/16 9 11-1/4 9 10-5/8 9 9-7/8 9 7-11/16 9 7-7/8 9 6-9/16 9 3-5/8 9 0 7 11-15/16 7 11-3/4 7 11-3/8 7 10-7/8 7 10-5/16 7 9-3/8 7 8-11/16 7 7-15/16 7 7-11/16 7 2-7/16 5 11-15/16 5 11-13/16 Part # 6225 H/V 630 H/V 6375 H/V 645 H/V 6525 H/V 660 H/V 675 H/V 690 H/V 4075 H/V 415 H/V 4225 H/V 430 H/V 4375 H/V 445 H/V 4525 H/V 460 H/V 475 H/V 490 H/V 4STR 6STR 8STR 10STR

(all dimensions are nominal)

Arc 22.5 30 37.5 45 52.5 60 75 90 7.5 15 22.5 30 37.5 45 52.5 60 75 90 N/A N/A N/A N/A

Chord Length 5 11-9/16 5 10-5/8 5 10-3/4 5 10-1/8 5 9-1/2 5 8-13/16 5 7 5 4-1/2 3 11-15/16 3 11-7/8 3 11-11/16 3 11-3/8 3 11-1/8 3 10-3/4 3 10-5/16 3 9-7/8 3 8-1/2 3 7-1/4 N/A N/A N/A N/A

Perforated Panel (R042) Perforations: 3/64" Dia. @ 1/8" O.C. Open area: 11% No border

Perforated Panel (R062) Perforations: 1/16" Dia. @ 1/4" O.C. Open area: 6% No border

**Perforated Panel (R250) Perforations: 1/4" Dia. @ 0.32" O.C. Open area: 58% Nominal 3/4" border

***Perforated Panel (R375) Perforations: 3/8" Dia. @ 1-1/8" O.C. Open area: 9% Nominal 3/4" border

***Perforated Panel (R188) Perforations: 3/16" Dia. @ 1" O.C. Open area: 4% Nominal 3/4" border

Perforated Panel (S250) Perforations: 1/4" x 1/4" @ 3/4" O.C. Open area: 11% Nominal 3/4" border

Canopies & Clouds

***Perforated Panel (S375) Perforations: 3/8" x 3/8" @ 1-1/8" O.C. Open area: 11% Nominal 3/4" border

**Perforated Panel (S500) Perforations: 1/2" x 1/2" @ 5/8" O.C. Open area: 64% Nominal 3/4" border

For additional information see brochure CS-3211.CAD drawings available on armstrong.com/serpentina

*/**Diamond Louver Open area: 22%

*/**Diamond Sheer Open area: 52%* Available in Bright Clear Anodized only. Available as standard 2' x 2' lay-in panels. ** Laminated acoustical fleece is not available on Perforated Panels S500, R250, Diamond Sheer and Diamond Louver due to open cell percentage.

690H/V916 PTIndicates curved trim Indicates 9/16" narrow face (excluded if 15/16" face) Indicates hill (arch) or valley (reverse arch) Indicates degree of arc Indicates actual arc length

15/16" Serpentina

9/16" Serpentina

Unperforated Panel (UPA) Perforations: None

Serpentina main beams are identified by arc length. For example, a 690 hill main beam has a 5' 4-1/2" chord length and will occupy 5' 4-1/2" of ceiling area.

9/16 grid face, use 2 x 2 panels only

*** Tech Black, Fine Fissured HumiGuard panels laminated to the back of Serpentina perforated metal panels provide a matching visual for flat areas adjacent to or within a Serpentina ceiling. Available for R188, R375 and S375

Physical DataMaterial Extruded aluminum main beams and hot dipped galvanized steel PRELUDE or SUPRAFINE cross tees Main Beam Load Test Data Hanger Spacing (Lbs/LF) (Applies to straight 15/16" face sections only) 42" - 18.66 48" - 10.80 Cross Tee/Main Flush Fit Beam Interface Flush Fit End Detail Staked-on clip Panel Sizes 2' x 4' and 2' x 6' semi-concealed metal panel options; 2' x 2', 2' x 4' and 2' x 6' lay-in panel options (select panel types perforated and unperforated); 9/16" grid face use 2' x 2' panels only Enhancing Acoustics By adding optional poly-bagged fiberglass or laminated fleece backing, you can achieve a greater acoustical performance in your design. No ASTM test exists for curved configurations. Fire Performance Metal: Class A


24

SERPENTINA Waves smooth texture

Now in Kits

Key Selection Attributes Armstrong standard colors plus four metallic paints; and custom colors available 30-year limited system warranty Pre-engineered Large-scale panel offer

Ty p i c a l A p p l i c a t i o n s Corridors and lobbies Conference rooms Reception areas Public access areas Airports, bus terminals and train stations Retail Education Hospitality Healthcare

Serpentina Waves Connector Sleeve

Serpentina Waves with R042 Perforated Panels in Slate

Visual Selection

Metal Infills Due to printing limitations, shade may vary from actual product.

White (WH)

Cream (CR)

Haze (HA)

Camel (CM)

Platinum (PL)

Tech Black (BL)

Silver Grey (SG)

Silver Satin (SA)

Gun Metal Grey (MY)

Champagne Gold (CG)

Wolf (WK)

Vanilla (VA)

Slate (ST)

Canopies & Clouds

Direction of Arc/ Size/Type4 x 4

Hill (SH)

Valley (SV)

Hill/Valley Combo (SW)

Arc 30, 45


Hill (SH)

Valley (SV)


Arc 30, 45


Hill (SH)

Valley (SV)


Arc 30, 45

6 x 4

30, 45

4 x 8

30, 45

12 x 10

30, 45

8 x 4

30, 45

6 x 8

30, 45

4 x 12

30, 45

10 x 4

30, 45

8 x 8

30, 45

6 x 12

30, 45

12 x 4

30, 45

10 x 8

30, 45

8 x 12

30, 45

4 x 6

30, 45

12 x 8

30, 45

10 x 12

30, 45

6 x 6

30, 45

4 x 10

30, 45

12 x 12

30, 45

8 x 6

30, 45

6 x 10

30, 45

SH 30 1204 R062 CM

10 x 6

30, 45

8 x 10

30, 45

ITEM NUMBER CREATION EXAMPLE To order / specify: Item SH301204R062CM Color For a 12 x 4 Hill Perforation configuration cloud with Cloud Size a 3 arc, R062 perforation Arc pattern, in a Camel color. Hill, Valley, Wave

Waves can also be created using standard Serpentina components, see page 24.

Physical Data

See Page 24

25


armstrong.com/waves

Recycled Content:

30% Steel (SS) 50% Aluminum (AL)

SERPENTINA Vaultsmooth texture

Key Selection Attributes Unique design statement Durable No visible grid Choice of finishes

Ty p i c a l A p p l i c a t i o n s Corridors Private offices Lobbies Accent areas

For single vaults, use rout holes for hanger wires

Prelude Stabilizer Cross Tee

15/16n Serpentina Main Beam

Bend cross tee tabs to one side. Prelude Stabilizer Cross Tee MBSC2 Clip (2 per vault included)

For multiple vaults, use Spacer Clip MBSC2 for hanger wires

Twist Tab

Visual SelectionGrid Face N/A Edge Profile Hemmed and Upturn Item Number FR62000 15 arc FR62001 30 arc FR62002 45 arc FR62003 15 arc FR62004 30 arc FR62005 45 arc Dimensions 23-1/8 x 72" perforated (R062) with acoustical fleece 23-1/8 x 72" unperforated

Performance SelectionAcoustics NRC CAC NA* Fire Rating Class A

Dots represent highest level of performance.

Canopies & Clouds

Durability Sag Resist Light Reflect 0.60** SoilG

NA*

Class A

0.78**

G

Accessories: PRELUDE ML Stabilizer Cross Tee (2 per vault included) Clips: MBSC2 (2 per vault included) * No ASTM test exists for vault configurations ** Applies to white panels only

Color Selection

Due to printing limitations, shade may vary from actual product. Note: Wilsonart decorative metal finishes are available as a special order for Serpentina Vault unperforated items only. For Wilsonart samples, call 800-433-3222.

Perforation OptionPerforated Panel (R062) Perforations: 1/16" Dia. @ 1/4" O.C. Open area: 6% No border

White (WH)

Brushed Natural L6429 (408)

Crystal Steel S6501 (414)

Matte Natural Aluminum 6252 (419)

Satin Brushed Gold 6258 (419)

Other custom paint finishes available for Serpentina Vault items as a special order.

Physical DataMaterial Aluminum thickness .025" Surface Finish Factory-finished polyester paint Fire Certification Factory Mutual Approvals Specification tested per ASTM E 84 and CAN/ULC S102 ASTM E 1264 Classification Fire Class Class A FR62003, FR62004, FR62005 Type XX (Nonacoustical aluminum panel), Pattern G FR62000, FR62001, FR62002 Type XX (Perforated aluminum panel), Pattern C Backloading Recommendation None Weight; Pieces/Carton 0.47 lbs/SF; 1 piece/ctn Warranty See warranty details in the back of this catalog Recommended Suspension System Items Suspension System Prepackaged system including: Two 6' SERPENTINA 15/16" Grid Main Beams, Two PRELUDE ML Stabilizer Cross Tees (21"), and two MBSC2 (Main Beam Spacer Clips)


26

Recycled Content:

SOUNDSCAPES Acoustical Canopies

44%LEED for SchoolsLocal Materials Renewable Materials Daylight & Views Acoustics Low Emitting or CHPS Waste Mgmt Recycled Content

LEED Credits Energy

Location Dependent

Key Selection Attributes Enhance acoustics with spot absorption Aesthetically define spaces Standard product with a custom look Hill and valley shapes available Adjustable to special heights Energy-efficient, high light-reflectant surface Embedded flush-mounted hardware system for clean look No special tools required for installation

Ty p i c a l A p p l i c a t i o n s Exposed structure areas Lobbies and reception areas Offices Hospitality and retail Conference rooms

Color

White (WH)

SoundScapes Acoustical Canopies

Panel Kits Canopies & Clouds Pre-curved SoundScapes Canopies Hardware and 16' cables included

Panel SelectionItem # 62581 62582 62591 62592 Shape Hill Hill Valley Valley Pieces 1 pc 2 pc 1 pc 2 pc

AccessoriesItem # 625530 7006 Description Extended Hanging Cables (4) 30' Cables Escutcheon Kit Used when hanging canopy below an existing ceiling. 2 kits needed per SoundScapes panel.

See more details, product data and installation considerations at armstrong.com/soundscapes

Physical DataPanel Size Nominal 46-1/2" x 75" x 1-1/4" Panel Arc Fixed 10'-9" radius Material Mineral fiber pre-formed in canopy shape Surface Finish and Edge Detail DuraBrite scrim on all sides, finished square edges Suspension System Embedded, flush-mounted hardware system and aircraft cables provided in panel kits. Installation Considerations SoundScapes Canopies must remain in their cartons until ready to hang. They require two people to handle and install a panel safely. Do not remove the canopy edge protectors until the panel is installed. See Installation Instructions on website for details. Design Considerations SoundScapes Canopies cannot be cut, drilled, or altered in any way. The panels can be damaged by exposure to moisture, to high temperatures and to high humidity. SoundScapes Canopies are not approved for exterior application. Field painting may affect the acoustical and/or fire performance, is not recommended and would void the product warranty. The SoundScapes cable hanging system must not hang from any commercial ceiling suspension system. The canopy must not be used to support any other material. Acoustical Performance 30 Sabin per panel using ASTM C423, or 78% more sound absorption than the same square footage of NRC 0.70 continuous ceilings. Light Reflectance 0.86 Weight 50 lbs per panel Fire Performance ASTM E84 Class A per IBC SoundScapes Canopies, as with other architectural features located at the ceiling, may obstruct or skew the planned fire sprinkler water distribution pattern, or possibly delay or accelerate the activation of the sprinkler or fire detection systems by channeling heat from a fire either toward or away from the device. Designers and installers are advised to consult a fire protection engineer, NFPA 13, and local codes for guidance where automatic fire detection and suppression systems are present. Seismic Restraint* The International Building Code allows architectural components to swing freely as long as they will not be damaged or cause damage. Canopies suspended will swing no more than 18" in any direction for each panel. * Pendulum reaction information is based on full scale testing andcomputer modeling conducted at the Structural Engineering Earthquake Simulation Lab located at the State University of New York at Buffalo.

Warranty See warranty details in the back of this catalog

27


armstrong.com/soundscapes

Recycled Content:

70-75%LEED for SchoolsLocal Materials Renewable Materials Daylight & Views Acoustics Low Emitting or CHPS Waste Mgmt Recycled Content

LEED CreditsEnergy

SOUNDSCAPES ShapesAcoustical Clouds

Location Dependent

Key Selection Attributes Enhance acoustics in open areas Improve sound absorption and reduce reverberation time Aesthetically define spaces 10 flat fiberglass panels in multiple sizes, shapes and colors Install individually or in groups, create your own unique design Exclusive DuraBrite finish on face and sides Full line of hanging kits and accessories Adjustable to special heights Quick and easy to install from a deck, through a ceiling or directly attached to drywall Engineered for use in seismic areas

Ty p i c a l A p p l i c a t i o n s Exposed structure areas Offices Lobbies and reception areas Public spaces Higher education Retail Hospitality

SoundScapes Shapes Concave and Convex in White

Color Selection


Canopies & Clouds

White (WH)

Shell (SH)

Pale Lemon (LM)

Pecan (PC)

Sky (SK)

Moss (MS)

Stone (SE)

Panel Selection3-10

(sho wn in finish view from belo w ceiling)Description Square Dimensions Nominal 4' x 4' x 7/8"2-10 3-10

Item #3-10

Item #3-10

Description Trapezoid

Dimensions Nominal 4' x 4' x 7/8"

5440_ _

5445_ _

3-10

3-10

3-10

5441_ _

Convex

Nominal 4' x 4' x 7/8"3-4 3-10

3-10

5446_ _

Left Parallelogram

Nominal 4' x 4' x 7/8"

3-5 3-4 /163

3-10

5442_ _

Concave


3-10

5447_ _

Right Parallelogram


3-5 3-10

3-4 5-10

5443_ _

Circle

Nominal 4' x 4' x 7/8"3-10

5448_ _

Small Rectangle


3-10 3-313/16

7-10

5444_ _

Hexagon

Nominal 4' x 4' x 7/8"3-10

5449_ _

Large Rectangle


Add 2-letter color suffix to item number when specifying or ordering (Ex: 5440WH)


armstrong.com/shapes

28

SOUNDSCAPES ShapesAcoustical CloudsSuspension Options1. Individual Suspension 2. Individual Attachment to Drywall 3. Group Suspension (one example only)For a full list of Accessory Kits for suspension, see page 30. For grouping ideas and CAD drawings, visit armstrong.com/shapes

Grouping Ideas4-Panel Square Group LayoutsTo create these kinds of groups with a minimum of 2" spacing between shapes, you need to order:

(4) shapes: (4) 5441 + (2) 5450 Deck Hanging Kits (1) 5451 Grouping Frames Kit

(4) 5442

(4) 5440

(4) 5443

(4) 5444

(4) 5445

(4) 5446

(4) 5447

(1) 5453 Frame Alignment Kit (4) 5454 Panel Hook Kits

4-Panel Linear Group LayoutsTo create these kinds of groups with a minimum of 2" spacing between shapes, you need to order:

(4) shapes:

(2) 5441 (2) 5442

(4) 5441

(4) 5442

(4) 5440

(4) 5443

(4) 5444

(4) 5445

(4) 5447

(4) 5446

(2) 5446 (2) 5447

+ (3) 5450 Deck Hanging Kits (2) 5451 Grouping Frame Kits (2) 5453 Frame Alignment Kits

(2) 5445 (1) 5446 (1) 5447

(1) 5452 Frame Splice Kit (4) 5454 Panel Hook Kits

9-Panel Square Group LayoutsTo create these kinds of groups with a minimum of 2" spacing between shapes, you need to order:

(9) shapes:

(5) 5441 (4) 5442

(9) 5440

(9) 5443

(5) 5440 (4) 5443

(9) 5444

(9) 5445

(9) 5446

(9) 5447

(6) 5446 (3) 5447

+ (5) 5450 Deck Hanging Kits (2) 5451 Grouping Frame Kits

(3) 5445 (3) 5446 (3) 5447

(3) 5453 Frame Alignment Kits (9) 5454 Panel Hook Kits

4-Panel Rectangular LayoutTo create this group with a minimum of 2" spacing between shapes, you need to order:

7-Panel Group LayoutsTo create these groups with a minimum of 2" spacing between shapes, you need to order:NOTE: See Installation Instructions LA-297302 for details on typical group configurations. CAD details showing various spacing options depending on panel shape are also available on the web at armstrong.com/shapes. Installation will require field cutting of the grouping frames. Increasing the spacing between shapes may require additional hardware. If you need assistance identifying what and how many accessory kits are needed for your project, please contact TechLine at 877 ARMSTRONG.

(4) + (3) (1) (1) (4)

shapes: 5450 5451 5453 5454

(2) 5440 & (2) 5448 (7) + (5) (2) (3) (7) shapes: 5450 5451 5453 5454 (7) 5444 or (7) 5443

Deck Hanging Kits Grouping Frame Kit Frame Alignment Kit Panel Hook Kits

Deck Hanging Kits Grouping Frame Kits Frame Alignment Kits Panel Hook Kits

29


armstrong.com/shapes

Recycled Content:

SOUNDSCAPES ShapesAcoustical CloudsAccessory KitsItem # Kit Contents

70-75%LEED for SchoolsLocal Materials Renewable Materials Daylight & Views Acoustics Low Emitting or CHPS Waste Mgmt Recycled Content

LEED Credits Energy

Applications always require more than one kit. Please review your needs carefully.

Location Dependent

Item #

Kit Contents

5450 Deck Hanging KitAllows for suspending individual shapes or grouping frames from deck and bottom end adjustment of height at panel or frame level. (2) (2) (2) (2) (2) gripper structure anchors gripper structure caps 8' aircraft cables bottom end cable adjusters nuts with washers

5454 Panel Hook KitFor use with group frames, one kit per 4' x 4' or 4' x 6' panel (2 kits for 4' x 8') (2) 4-1/2" high panel hooks, black (2) 3-1/2" low panel hooks, black (8) bolts

5451 Grouping FramesSuspension frames used to group panels together (4) suspension frames, 12' long, black

5455 Drywall Hanging KitFor individual panel attachment to drywall (2) drywall clip assemblies (2) shoulder bolts

5452 Frame Splice KitConnects group suspension frames for longer runs (> 12 feet) (2) group frame connectors, 10" long, black (4) bolts with washers (4) nuts

625530 Extended Hanging CablesFor use with deck hanging kit when longer cables are needed (4) 30' aircraft cables

7006 Escutcheon KitUsed when hanging panels below an existing ceiling (2) collars with set screws (2) 2" escutcheons

5453 Frame Alignment KitFor use with group suspension frames (4) frame alignment spacers, clear plastic (4) bolts (4) nuts with washers

Canopies & Clouds

NOTE: If you need assistance identifying what and how many accessory kits are needed for your project, please contact TechLine at 1 877 ARMSTRONG.

Physical DataMaterial 7/8" thick Fiberglass with DuraBrite scrim on face and sides Surface Finish DuraBrite with factory-applied paint on face and sides. Standard white has energy-saving, high light-reflective finish (LR 0.90). Back of panel is unfinished with embedded metal extrusions. Panel Weight 0.63 lbs/SF Design Consideration SoundScapes Shapes maintain a natural sag that may not be noticeable when installed 6" or less apart. Deflection up to 1/8" has been documented in some cases. SoundScapes Shapes should be installed on no more than a 5 slope Fire Performance SoundScapes Shapes panel material is ASTM E84 Class A: Flame Spread 25 or under and Smoke Developed 50 or less. SoundScapes Shapes, as with other architectural features located in the ceiling plane, may obstruct or skew the existing or planned fire sprinkler water distribution pattern, or possibly delay the activation of the fire sprinkler or fire detection system. Consult a fire protection engineer, NFPA 13, and local codes for guidance on the proper installation techniques where fire detection or suppression systems are present. ASTM E1264 Classification Type XII, Form 2, Pattern E Acoustical Performance SoundScapes Shapes offer excellent sound absorption. They provide greater sound absorption than a continuous ceiling of the same area because sound is absorbed from front and back surfaces. Color shapes have slightly reduced acoustical performance. See data page CS-3867 for details. Seismic Restraint* The International Building Code allows architectural components to swing freely as long as they will not be damaged or cause damage. Shapes suspended individually with aircraft cable will swing no more than 18" in any direction for each panel. Shapes direct attached to drywall or suspended in group systems have been engineered for application in all seismic areas. * Pendulum reaction information is based on full scale testing andcomputer modeling conducted at the Structural Engineering Earthquake Simulation Lab located at the State University of New York at Buffalo.

Recommended Suspension Systems SoundScapes Shapes are pre-assembled with metal extrusions in the back of the panels. Standard accessory kits facilitate quick and easy installation from the deck, through a ceiling or directly attached to drywall. See Installation Instructions LA-297302 for installation details. Warranty See warranty details in the back of this catalog. See more details, product data and installation considerations at armstrong.com/shapes.


30

Recycled Content:

METALWORKS Canopies


LEED Credits Energy

Location Dependent

Key Selection Attributes Define and accentuate spaces Easy installation Adjustable to special heights and angles Perforation options available for better acoustics Three panel types flat, hill, valley Durable easy to clean and maintain Custom colors available

Ty p i c a l A p p l i c a t i o n s Exposed structure areas Lobbies and reception areas Office Retail Hospitality

MetalWorks Canopies in White

Due to the nonstandard dimensions, finishes and performance features for MetalWorks Custom systems, please visit our web site at armstrong.com/metalworks or call 1 877 ARMSTRONG and select options 1-1-4 to work with the Architectural Specialties project management team.

Panel Kits Canopies & Clouds Pre-curved MetalWorks Canopies Hardware and cables included

Color SelectionDue to printing limitations, shade may vary from actual product.

Panel SelectionDurable Item No.* 5375_ _ _ _ 5376_ _ _ _ 5377_ _ _ _ Shape Flat HillG G G

Wash ScrubG G

SoilG

Custom RAL Colors also available upon request White (WH) Silver Grey (SG) Gun Metal Grey (MY)

ValleyG G G

Perforation Options

* When specifying or ordering, include the appropriate perforation code and color suffix (Ex: 5375P1WH)with the item number Note: Panel kits include pre-curved MetalWorks Canopies, hardware and cables. Unperforated (P1) Microperforated (shown 30% of actual size) (P2) Extra Microperforated (actual size) (P3)

Physical DataPanel Size Nominal 74-1/2" x 46-1/2" x 1-1/2" Panel Arc Flat, Hill or Valley Material Electrogalvanized steel thickness .028" Surface Finish and Edge Detail Factory-applied post-production powder coated finish Flat all edge details: 45 angle; Curved (hill/valley) edge detail width: 45 angle, edge detail length: 90 angle Weight Flat: 58 lbs,; Hill or Valley 62.4 lbs Suspension System Hardware and cables included in kit Design Considerations MetalWorks Canopies are not approved for exterior application. The MetalWorks Canopies cable hanging system must not hang from any commercial ceiling suspension system. The canopy must not be used to support any other material. MetalWorks Canopies, as with other architectural features located in the ceiling plane, may obstruct or skew the existing or planned fire sprinkler water distribution pattern, or possibly delay the activation of the fire sprinkler or fire detection system. Designers and installers are advised to consult a fire protection engineer, NFPA 13, and their local codes for guidance on the proper installation techniques where fire detection or suppression systems are present. Fire Performance: Class A per IBC Warranty See Warranty details in the back of this catalog

31


armstrong.com/metalworks

WOODWORKS Custom Canopies

Key Selection Attributes Define spaces with warm natural wood Various panel sizes available, up to 4' x 8' with minimum 12' radius Adjustable to special heights and angles Veneer edge banding for superior quality and aesthetics Veneer management available to coordinate with millwork or other interior finishes 92% recycled content Class A Fire performance

Ty p i c a l A p p l i c a t i o n s Exposed structure areas Lobbies and reception areas Office Retail HospitalityWoodWorks Access Custom Curved Ceiling in Cherry Quartered with Clear Satin finish

Due to the nonstandard dimensions, finishes and performance features for WoodWorks Custom systems, please visit our web site at armstrong.com/woodworks or call 1 877 ARMSTRONG and select options 1-1-4 to work with the Architectural Specialties project management team.

WoodWorks Custom Canopies in Maple

Veneer Options


Canopies & Clouds

WoodWorks Custom panels can be made from any standard WoodWorks veneer. Natural Variations (Real Wood Veneers) Constants (Real Wood Veneers) Bamboo (Rapidly Renewable)

Beech (NBE)

Maple (NMP)

Light Cherry (NLC)

Dark Cherry (NDC)

Maple (CMP)

Cherry (CCH)

Walnut (CWN)

Patina (BAP)

Native* (BAN)

* A premium veneer option managed

Custom Veneers

(partial list)

These are a representation of some custom veneers used on recent projects. Additional custom veneers and continuous upturn options are also available on WoodWorks products.

through Architectural Specialties due to the potential for significant panel-to-panel color variation. Minimum order quantities and extended lead times may apply.

Custom Red Oak Rift

Custom African Mahogany Quartered

Custom Anigre Quartered Figured

Custom Cherry Quartered

Custom Sapele Quartered

Swatch ItOnline tool that allows you to visually create MetalWorks and WoodWorks ceiling and wall swatches color, perforation and pattern watch as your swatch comes to life! armstrong.com/swatchit

Note: Perforations not recommended for WoodWorks Custom curved panels.

armstrong.com/woodworks

32

METALWORKS Standard CeilingsAt-a-GlanceStandard Ceilings

METALWORKS Tegular0.65

pgs. 39-41

METALWORKS pgs. 39-41 Tegular Faceted Applications0.65

METALWORKS Concealed Beveled0.65

pg. 42

METALWORKS Vector0.65

pgs. 43-44

METALWORKS pgs. 43-44 Vector Faceted Applications0.65

METALWORKS pgs. 45-46 Vector for Exterior Applications

METALWORKS Linear0.70

pgs. 47-48

METALWORKS Mesh

pgs. 49-50

METALWORKS Open Cell

pg. 51

METALWORKS Plank0.65

pg. 52

METALWORKS Tin

pgs. 53-54

METALWORKS CanopiesFeatured in Clouds & Canopies

pg. 31

Standard Color Selection


White (WH)

Silver Grey (SG)

Gun Metal Grey (MY)

Tech * Black (BL)

Nickel * Chrome (NK)

Bright * Anodized (BA)

Natural * Anodized (NA)

Copper * (CP)

Bronze * (BZ)

* Tech Black, Nickel Chrome, Bright Anodized,Natural Anodized, Copper and Bronze colors are available for MetalWorks Mesh panels only. Copper and Bronze are premium order colors.

Effects Maple (FXMP)

Effects Cherry (FXCH)

Effects Walnut (FXWN)

Effects Maple Exterior Both Sides (FXMP2)

Effects Cherry Exterior Both Sides (FXCH2)

Effects Walnut Exterior Both Sides (FXWN2)

Standard Perforations

Actual 1:1 scale shownSee page 35 for premium perforations available on standard Tegular and Vector products.

Pattern 138Microperforated Type: Round-Diagonal Hole Size: 1.5mm [.059"] % Open Area: 18.4%

Rg 0701Extra Microperforated Type: Round-Straight Hole Size: 0.7mm [.028"] % Open Area: 1.5%

33



METALWORKS Custom CeilingsAt-a-GlanceCustom Ceilings Icon KeyIcons are used throughout the catalog to help you quickly identify key product attributes.

High AcousticsProduct has NRC (Noise Reduction Coefficient) 0.65 or greater.

SeismicMETALWORKS Fastrack Systems pg. 55 METALWORKS Tartan Systems pg. 55 METALWORKS RH200 Flat Systems pg. 56Category D, E & F

High DurabilityThree specific icons indicate superior:

WashabilityOffers superior wash resistance without compromising panel finish integrity, using a washability tester as per ASTM D 2486.

ScrubbabilityWithstands up to 150 scrub cycles using a scrubbability tester as per ASTM D 2486.

METALWORKS RH200 Curved Systems

pg. 56

METALWORKS Radial Systems

pg. 57

METALWORKS RH215 Faceted Systems

pg. 57

Soil ResistanceExcellent resistance to dirt and/or grease; for lasting value and performance.

Color AvailabilityAvailable in color

METALWORKS Premium & Custom Options

pg. 58

Custom Color SelectionCustom RAL Colors (partial list)


Refer to CS-3957 for a sampling of Custom RAL colors. Contact Armstrong Architectural Specialties at 877 ARMSTRONG, select options 1-1-4 for custom color matching requests.

RAL 1000

RAL 1001

RAL 1011

RAL 1012

RAL 1021

RAL 1027

RAL 1033

RAL 2000

RAL 2002

Swatch ItRAL 3001 RAL 3005 RAL 3014 RAL 4005 RAL 4007 RAL 5001 RAL 5002 RAL 5012 RAL 5014

Online tool that allows you to visually create MetalWorks and WoodWorks ceiling and wall swatches color, perforation and pattern watch as your swatch comes to life! armstrong.com/swatchit

RAL 5022

RAL 5018

RAL 6000

RAL 6004

RAL 6017

RAL 6019

RAL 6027

RAL 6032

RAL 7005

RAL 7023

RAL 7031

RAL 7042

RAL 8001

RAL 8003

RAL 8023

RAL 8028

RAL 9001

RAL 9018

METALWORKS

Premium and Custom Perforation OptionsRefer to pages 35-38 for examples of premium and custom perforation options.


34

METALWORKS Premium & Custom Ceiling PerforationsPremium PerforationsType : Round-Staggered Actual 1:1 scale shown unless otherwise noted.Available on 2' x 2' MetalWorks Tegular, Vector, Concealed and premium and custom-size panels. Orders less than 1000 SF may result in longer lead times and higher prices.

Type : Round-Straight

103

Hole Size: 2.9mm [.114"] % Open Area: 24.4% Type: Round-Diagonal

106

Hole Size: 2.5mm [.098"] % Open Area: 13.6% Type : Square-Straight

107

Hole Size: 4.1mm [.157"] % Open Area: 26.9%

132


136

Hole Size: 10mm [.394"] % Open Area: 59.2%

Custom PerforationsType : Round-Staggered

Available on MetalWorks 2' x 2' Tegular, Vector, Concealed and Custom-size panels. Orders less than 2,500 SF may result in longer lead times and higher prices. Contact Architectural Specialties for your project at 877 Armstrong; select options 1-1-4.

Rv 2523


Rv 4058


Rv 4625



35

Rg 1821 Hole Size:

1.8mm [.071"] % Open Area: 21.0%

Rg 2621 Hole Size:

2.6mm [.102"] % Open Area: 21.0%

Rg 3503 Hole Size:

3.5mm [.138"] % Open Area: 3.0%


METALWORKS Custom Ceiling PerforationsType : Round-Straight Actual 1:1 scale shown unless otherwise noted.

Rg 1511 Hole Size:

1.5mm [.059"] % Open Area: 11.0%

Rg 2504 Hole Size:

2.5mm [.098"] % Open Area: 4.0%

Rg 2516 Hole Size:

2.5mm [.098"] % Open Area: 16.0%

Rg 3013 Hole Size:

3.0mm [.118"] % Open Area: 13.0%

Rg 3027 Hole Size:

3.0mm [.118"] % Open Area: 27.0%

Rg 3512 Hole Size:

3.5mm [.138"] % Open Area: 12.0%

Rg 3529 Hole Size:

3.5mm [.138"] % Open Area: 29.0%

Rg 4022 Hole Size:

4.0mm [.157"] % Open Area: 22.0%

Rg 8022 Hole Size:

8.0mm [.315"] % Open Area: 22.0%

Type : Round-Diagonal

METALWORKS

Rg 14023 Hole Size:

14.0mm [.551"] % Open Area: 23.0%

Rd 1506 Hole Size:

1.5mm [.059"] % Open Area: 6.0%

Rd 1511 Hole Size:

1.5mm [.059"] % Open Area: 11.0%

36

METALWORKS Custom Ceiling PerforationsType : Round-Diagonal Actual 1:1 scale shown unless otherwise noted.

Rd 1522 Hole Size:

1.5mm [.059"] % Open Area: 22.0%

Rd 1810 Hole Size:

1.8mm [.071"] % Open Area: 10.0%

Rd 2508 Hole Size:

2.5mm [.098"] % Open Area: 8.0%

Rd 2535 Hole Size:

2.5mm [.098"] % Open Area: 35.0%

Rd 3013 Hole Size:

3.0mm [.118"] % Open Area: 13.0%

Rd 3019 Hole Size:

3.0mm [.118"] % Open Area: 19.0%

Rd 3025 Hole Size:

3.0mm [.118"] % Open Area: 25.0%

Rd 3139 Hole Size:

3.1mm [.122"] % Open Area: 39.0%

Rd 3506 Hole Size:

3.5mm [.138"] % Open Area: 6.0%

Rd 4006 Hole Size:

4.0mm [.157"] % Open Area: 6.0%

Rd 4011


37



METALWORKS Custom Ceiling PerforationsType : Square-Straight Actual 1:1 scale shown unless otherwise noted.

Qg 4025 Hole Size:

4mm [.157"] % Open Area: 25.0%

Qg 8043 Hole Size:

8mm [.315"] % Open Area: 43.0%

Qg 10059 Hole Size:

10mm [.394"] % Open Area: 59.0%

50.0mm [1.969 ]

50.0mm 25.0mm [1.969 ] [0.985 ]

32.0mm [1.260 ]

12.5mm [0.492 ]

32.0mm [1.260 ]

47.0mm [1.850 ]

20.0mm [0.787 ]

20.0mm [0.787 ]20.0mm [0.787 ]

20.0mm [0.787 ]

Scale: 50% of actual size

Scale: 50% of actual size 20mm [.787"] % Open Area: 18.0%


Qg 12515 Hole Size:

12.5mm [.492"] % Open Area: 15.0%

Qg 20018 Hole Size:

Qg 20034 Hole Size:

20mm [.787"] % Open Area: 34.0%

Type : Oval-Straight SlottedVARIES

Type : Trapezoid-Staggered20.4mm [0.805 ] 7.4mm 14.7mm [0.290 ] [0.580 ]

VARIES

3.0mm [0.118 ]

9.0mm [0.354 ]

5.0mm [0.197 ]

37.0mm [1.457 ]

2.0mm [0.079 ]

3.0mm [0.118 ]

26.8mm [1.055 ]

25.0mm [0.894 ]

10.0mm [0.394 ] MINIMUM

42.0mm [1.654 ]

10.0mm [0.394 ] MINIMUM




METALWORKS

Tv 26845 Hole Size:

26.8mm x 9.0mm [1.102 x .354"] % Open Area: 45.0%

Lg 25042 Hole Size:

25mm x 3mm [.984 x .118"] % Open Area: 42.0% or Varies

Lg 42003 Hole Size:

42mm x 2mm [4.724 x .079"] % Open Area: 3.0% or Varies

38

METALWORKS Tegularsmooth texture

MetalWorks Flush Tegular Microperforated in Silver Grey

Inset: Effects Wood Looks Tegular Extra Microperforated in Cherry

Key Selection Attributes 100% upward access Ideal for renovation using standard 15/16 or 9/16 Exposed Tee grid systems Durable Washable Scrubbable Soil-resistant Available in 3 standard Effects Wood Looks finishes with matching Effects trim Cutouts for recessed lights and sprinklers available Standard edge caps for cut panels Additional colors and perforations available as premium and custom options

Ty p i c a l A p p l i c a t i o n s Lobbies and corridors Hospitality and retail Office Transportation Healthcare High access areas

Color Selection

Due to printing limitations, shade may vary from actual product. NOTE: Effects colors are only available for unperforated and extra microperforated panels.

Perforation Options Microperforated Extra Microperforated See 1:1 scale drawings on page 33.

White (WH)

Silver Grey (SG)

Gun Metal Grey (MY)

Effects Maple Effects Cherry Effects Walnut (FXMP) (FXCH) (FXWN)

Available in RAL Custom Colors upon request.

DetailFor information about faceted applications with square Tegular panels in 15/16" grid, refer to CS-3701 and installation instructions on our web site at armstrong.com/metalworks, search keyword (example: faceted). For Tegular panels, a Faceted Hold Down Clip must be used, which will limit accessibility. If accessibility is required in a faceted application, use Vector panels.METALWORKS Tegular Microperforated METALWORKS Tegular Extra Microperforated EFFECTS Wood Looks Tegular Extra Microperforated

39



Recycled Content:

METALWORKS Tegularsmooth texture


LEED Credits Energy

Location Dependent

Visual SelectionEdge Profile Suspension Detail Dwg.Pgs. 208-210

Performance SelectionAcoustics NRC CAC Item Number Dimensions Fire Rating

Dots represent highest level of performance.

Durable Light Reflect

METALWORKS Flush Tegular15/16" Flush Tegular 22 22 9442U6A1 _ _ 9444U6A2 _ _ 2' x 2'unperforated

0.10 0.65 0.90**G

36 38*G

Class A Class A

0.77 0.61

Wash ScrubG G

SoilG

2' x 2'microperforated with plain border and acoustical fleece

G

G

G

METALWORKS 5/16" Square Tegular15/16" Square Tegular 23 23 9683U6A1 _ _ 9685U6A2 _ _ 2' x 2'unperforated

0.10 0.65 0.90**G

36 38*G

Class A Class A

0.77G G G


0.61G G G

23

4704U6A2 _ _

2' x 2'extra microperforated with acoustical fleece

0.65 0.70**G

40*G

Class A

0.77G G G

9/16" Square Tegular

25, 40, 52, 53, 55 25, 40, 52, 53, 55 25, 40, 52, 53, 55

9320U6A1 _ _ _ _ 9324U6A2 _ _

2' x 2'unperforated

0.10 0.65 0.90**G

36 38*G

Class A Class A

0.77G G G


0.61G G G

2184U6A2 _ _ _ _

2' x 2'extra microperforated with acoustical fleece

0.65 0.70**G

40*G

Class A

0.77G G G

METALWORKS 5/8" Square Tegular15/16" Square Tegular 24 24 9680U6A1 _ _ 9682U6A2 _ _ 2' x 2'unperforated

0.10 0.65 0.90**G

36 38*G

Class A Class A

0.77G G G


0.61G G G

9/16" Square Tegular

26(Suprafine XL)

4700U6A1 _ _ 4702U6A2 _ _

2' x 2'unperforated

0.10 0.65 0.90**G

36 38*G

Class A Class A

0.77G G G

26(Suprafine XL)


0.61G G G

* With optional field-cut #747 mineral fiber backing (cannot be used with fiberglass infill #8200100) ** NRC 0.90 (microperforated); NRC 0.70 (extra microperforated) with optional fiberglass infill #8200100(cannot be used with #747 mineral fiber backing) When specifying or ordering, include the appropriate color suffix (WH, SG or MY) with the item number. Light reflectance is for white only. S Service item with 1,000 SF minimum order quantity and extended lead time. Available in Effects Wood Looks finishes.

Suspension Systems9/16" 15/16" Standard: Interlude, Silhouette Bolt-Slot, Sonata, Suprafine XL, Trimlok Screw-Slot Standard: Prelude XL

Physical DataMaterial Electrogalvanized Steel thickness .021 Surface Finish Factory-applied powder-coated finish (post-coated) Premium and Custom RAL colors also available. Refer to CS-3957 for a sampling of Custom RAL colors. Contact Armstrong Architectural Specialties for custom color matching requests at 877 ARMSTRONG; select options 1-1-4. Fire Performance Factory Mutual Approvals Specification tested per ASTM E84 and CAN/ULC S102. Flame Spread Index 25 or less. Smoke Developed Index 50 or less. ASTM E1264 Classification Fire Class Class A Unperforated Type XX, Pattern G Perforated Type XX, Pattern C Backloading Recommendation Contact TechLine for specific information Warranty See warranty details in the back of this catalog Weight; Square Feet/Carton 9444U6A2_ _ - 0.75 lbs/SF; 64 SF/Ctn 9442U6A1_ _ - 0.80 lbs/SF; 64 SF/Ctn 9685U6A2_ _ - 0.86 lbs/SF; 64 SF/Ctn 9683U6A1_ _, 9682U6A2_ _, 4702U6A2_ _, 4704U6A2_ _ 0.89 lbs/SF; 64 SF/Ctn 9324U6A2_ _, 9680U6A1_ _, 4700U6A1_ _, 2184U6A2_ _ 0.92 lbs/SF; 64 SF/Ctn 9320U6A1_ _ - 0.97 lbs/SF; 64 SF/Ctn

METALWORKS


40

METALWORKS Tegularsmooth texture Accessories for Interior ApplicationsItem Number 5342 _ _ _ _ 5344_ _ _ _ 5346_ _ _ _ FXTBC FXVTBC FXSPLICE FX4SPLICE FXSPTHDC 8200100 6096_ _** 6099_ _** Description 2" Effects Trim * 4" Effects Trim * 6" Effects Trim * Effects T-bar Connector Clip Effects Vector T-bar Connector Clip Splice Plate with Set Screws Splice Plate with Set Screws Effects Hold Down Clip for Cut Panel Installations Fiberglass Infill Panel 15/16" Edge Cap for Cut Tegular Panels 9/16" Edge Cap for Cut Tegular Panels Length 10' 10' 10' N/A N/A N/A N/A N/A 2' x 2' x 1" Nominal 2' Nominal 2' Pcs/carton 6 6 6 10 10 10 10 10 12 50 50

When specifying or ordering, include the appropriate color suffix (FXCH, FXMP or FXWN). * Trim can be used with both Vector and Tegular panels. Cartons include T-bar connector clips and splice plates for full panel installations. ** When specifying or ordering, include the appropriate color suffix (WH, SG or MY) with the item number.Note: Edge Caps only available for 5/16" square Tegular items.

Effects Wood Looks in Walnut with 2" Effects Walnut Trim

Effects Trim profiles

METALWORKS

41



Recycled Content:

25%LEED for SchoolsLocal Materials Renewable Materials Daylight & Vi

Date post:	26-Nov-2014
Category:	Documents
Upload:	iris-ruse
View:	170 times
Download:	5 times

286863

Documents