33

Dashboard and immobilizer Dashboard and immobilizer new featuresnew features

4

2

DashboardDashboard

User interfaceUser interface

LCDLCD

1

Tuono 1000Tuono 1000

The dashboard is the Matrix type, already used on SR 50 i.e. and The dashboard is the Matrix type, already used on SR 50 i.e. and

Pegaso 650 Strada but with a few different features that we shall see Pegaso 650 Strada but with a few different features that we shall see

in detailsin details

11 DisplayDisplay

22 Fault lightFault light

33 Side standSide stand

44 Neutral sensorNeutral sensor

55 RpmRpm

66 Turn indicatorTurn indicator

77 High beamHigh beam

88 Fuel reserveFuel reserve

Dashboard and immobilizer new Dashboard and immobilizer new featuresfeatures

The controls allowing the user to move through the various display functions are a The controls allowing the user to move through the various display functions are a three-position selector and a push-button located on the left dimmer switch.three-position selector and a push-button located on the left dimmer switch.

The selector positions are:The selector positions are:

- Trip 1- Trip 1

- Trip 2- Trip 2

- Mode- Mode

If set to the first position TRIP1 data will be shown, If set to the first position TRIP1 data will be shown,

if set to the second position TRIP2 data will be shown,if set to the second position TRIP2 data will be shown,

while if set to the MODE position will give access to dashboard configuration mode. while if set to the MODE position will give access to dashboard configuration mode.

User interfaceUser interface

KEY-ONKEY-ON

Selector: MODESelector: MODE  

Time or Lap time Time or Lap time display shall be display shall be selected using the selected using the LAP TIMER LAP TIMER sub-menusub-menu

At key-on two letters S At key-on two letters S (suspension) and T (tire) (suspension) and T (tire) come on to detect the come on to detect the possible control units possible control units managing suspension set-up managing suspension set-up and tyre pressure and and tyre pressure and temperaturetemperature

The dashboard – LCDThe dashboard – LCD

Selector: MODESelector: MODE   

Press the SET key to Press the SET key to display battery voltage (only display battery voltage (only when vehicle is stopped) when vehicle is stopped) and vehicle speedand vehicle speed

Hold the SET key to see the Hold the SET key to see the MENU pageMENU page

The dashboard – LCDThe dashboard – LCD

Selector: Trip 1 & 2Selector: Trip 1 & 2

In place of odometer reading, trip meters 1 and 2 are displayed, briefly press the In place of odometer reading, trip meters 1 and 2 are displayed, briefly press the Set button to alternately see:Set button to alternately see:

Trip meter 1-2Trip meter 1-2

Riding time 1-2Riding time 1-2

Top speed 1-2Top speed 1-2

Average speed 1-2Average speed 1-2

Tyre pressure and temperatureTyre pressure and temperature

Shock absorber and fork click Shock absorber and fork click settingssettings

These two last functions are not activeThese two last functions are not active

 

ExampleExample Trip 1 and Riding time 1 Trip 1 and Riding time 1

The dashboard – LCDThe dashboard – LCD

Alarm indicationAlarm indication

The icon normally indicating the The icon normally indicating the temperature flashes to indicate temperature flashes to indicate overtemperatureovertemperature alarm alarm (temperature received by ECU (temperature received by ECU above or equal to 115°)above or equal to 115°)

The The ’SERVICE’’SERVICE’ alarm is alarm is displayed in case of active ECU displayed in case of active ECU or dashboard alarms. The oil or dashboard alarms. The oil can icon indicates that the ECU can icon indicates that the ECU output output Oil Pressure Error Oil Pressure Error signal signal

 

 

The dashboard – LCDThe dashboard – LCD

If the fuel reserve warning light turns on, If the fuel reserve warning light turns on, after about 2 km, the "distance to empty" after about 2 km, the "distance to empty" is calculatedis calculated

Distance to emptyDistance to empty

Alarm indicationAlarm indication

The Overtemperature and Oil pressure Alarm indications go off as soon as the The Overtemperature and Oil pressure Alarm indications go off as soon as the fault is cleared, while the Service indication (ECU or dashboard errors) goes off fault is cleared, while the Service indication (ECU or dashboard errors) goes off only when key is turned OFFonly when key is turned OFF

The dashboard – LCDThe dashboard – LCD

OPERATING MODE: DIAGNOSIS MENUOPERATING MODE: DIAGNOSIS MENU

13432

ExitExit

ECU diagnosticsECU diagnostics

Dashboard errorsDashboard errors

Delete errorsDelete errors

Reset serviceReset service

UpdateUpdate

Change keysChange keys

Km/MilesKm/Miles

The dashboard – LCDThe dashboard – LCD

OPERATING MODE: ECU DIAGNOSTICSOPERATING MODE: ECU DIAGNOSTICS

ExitExit

ECU diagnosticsECU diagnostics

Dashboard errorsDashboard errors

Delete errorsDelete errors

Reset serviceReset service

UpdateUpdate

Change keysChange keys

Km/MilesKm/Miles

The dashboard – LCDThe dashboard – LCD

OPERATING MODE: ECU DIAGNOSTICSOPERATING MODE: ECU DIAGNOSTICS

 

This function only displays live errors. This function only displays live errors.

SAE fault code SAE fault code

Aprilia fault codeAprilia fault code

Aprilia fault description in EnglishAprilia fault description in English

If no Aprilia code is associated to the SAE code, this indication is shownIf no Aprilia code is associated to the SAE code, this indication is shown

The dashboard – LCDThe dashboard – LCD