3-ICP-200 Reciprocating Pump
APPLICATIONS tCoil Tubing Support tWell Service tHigh Pressure Pumping tPurging tFracturing
PUMP PERFORMANCE tMaximum HP: 240 hp tMaximum Rod Load: 21,000 lbs tMaximum RPM: 1,200 rpm tMinimum RPM: 60 rpm tMaximum Suction Pressure: 300 psi tPressure Lubrication tGear Reduction Models: 3.04:1 Ratio tOxygen Cleaning Available
18119 Telge Road t Cypress, Texas 77429Office (713) 467-0869 t Fax (713) 464-2089www.csphouston.com
CS&P’s reciprocating pumps are
designed and manufactured to
exceed the highest standards for
performance and quality. Cold
ends are specifically designed to
deliver cryogenic liquids at high
pressure and can be adapted for
non-cryogenic applications as
well. Our equipment is suited for
use in a variety of applications
including well service, industrial
gas, alternative fueling, food and
beverage processing, medical
and aerospace.
FLUIDS PUMPED
tNitrogen
tOxygen
tArgon
tMethane (LNG)
tEthylene
tCO2
CS&P Technologies18119 Telge RoadCypress, Texas 77429Office (713) 467-0869Fax (713) 464-2089
CS&P Technologies Canada109 Clearskye WayRed Deer, AB T4E 0A1Office (403) 346-8240Fax (403) 346-8245
(800) 262-6103 t www.csphouston.com
CS&P Criogenica de Mexico, S.A. de C. V.Carretera Villahermosa-Cardenas KM 5.5Parque Logistico Industrial TabascoVillahermosa Tabasco C.P. 86103Office + 52 993-142-7031
0
2,500
5,000
7,500
10,000
12,500
15,000
17,500
20,000
22,500
25,000
27,500
30,000
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Pres
sure
[psi
]
Flow [gpm]
3-ICP-200
1
1.2
1.25
1.5
1.625
50
2
2.375
2.875
Cold End Size
3-ICP-200GR