Printing pads - Series 200 Product catalog 2019-1 Page 4-4 - 1 SICATECH A/S • Roedebrovej 17, Linde • DK-7600 Struer • Denmark • Phone: (+45) 97 48 70 17 • Email: [email protected]www.sicatech.dk BT133 H 27 Print area*: approx. Ø 20 Ø 29 T06 H 28 Print area*: approx. Ø 21 Ø 30 BT105 H 42 Print area*: approx. Ø 15 Ø 35 BT56 H 23 Print area*: approx. Ø 20 Aluminium socket / M6 Ø 27 BT103 H 24 Print area*: approx. Ø 20 Ø 31 BT35 H 30 Print area*: approx. Ø 18 Aluminium socket / M6 Ø 29 Printing pads - Series 200 Silicone pads - Series 200 is delivered in hardness 0-30 Shore A, manufactured as standard with wood socket with M6, aluminum or steel socket. We also manufacture customized magnetic click attachment which makes it possible to change pads in seconds without tools or adjustments. All dimensions are approximately dimensions and the specified print area* applies to flat pressure surface. For smaller print areas and tampon mounting of several small silicone tampons, see Series 900 MINI.
���Silicone pads - Series 200 is delivered in hardness 0-30 Shore A, manufactured as standard with wood socket with M6, aluminum or steel socket. We also manufacture customized magnetic click attachment which makes it possible to change padsin seconds without tools or adjustments.
All dimensions are approximately dimensions and the specified print area* applies to flat pressure surface.
For smaller print areas and tampon mounting of several small silicone tampons, see Series 900 MINI.
Silicone pads - Series 250 is delivered in hardness 0-30 Shore A, manufactured as standard with wood socket with M6, aluminum or steel socket. We also manufacture customized magnetic click attachment which makes it possible to change padsin seconds without tools or adjustments.
All dimensions are approximately dimensions and the specified print area* applies to flat pressure surface.
For smaller print areas and tampon mounting of several small silicone tampons, see Series 900 MINI.
![PowerPoint Presentation · plt. [42] ) print print #nornalize data training_images = training_images / 255. e test images - test images / 255.ø *build model model = tf.keras models](https://static.documents.pub/doc/80x56/5f772d1f6fc9ec5f02309166/powerpoint-presentation-plt-42-print-print-nornalize-data-trainingimages.jpg)
