+ All Categories
Home > Documents > 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP...

3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP...

Date post: 20-Apr-2018
Category:
Upload: vothu
View: 233 times
Download: 2 times
Share this document with a friend
84
3 Year Shelf Life on Single Element ICP, ICP/MS & AAs
Transcript
Page 1: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

3 Year Shelf Life onSingle Element ICP, ICP/MS & AAs

Page 2: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

All the Standards you need

A Certificate of Analysis is provided foreach standard stating the actualconcentration of the final solution, thetracability to NIST, the expiration dateand for ICP & ICP/MS, the traceimpurities detected.

ISO/IEC 17025ACCREDITED

Page 3: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Table of Contents

Single Element Standards 1-11ICP (Plasma Emission Spectroscopy) 1-5

ICP/MS (Plasma Emission / Mass Spectroscopy) 6-7

AA (Atomic Absorption Spectroscopy) 8-11

Matrix Modifiers & Calibration Standards 11

IC / Wet Chem / TPH Standards 12-19IC (Ion Chomatography) 12-15

Wet Chemicals 16-18

TPH, Oil and Grease 19

ICP Multi-Element Standards 20-40Quality Control 20

Second Source 21

Instrument Check 21

Screening 22

SDWA Drinking Water 23

Groundwater & Wastewater 24

TCLP 24

MISA Test Group 29 Analysis 25

MES (Multi-Element Standards) 26-28

EU Formulation 28

Gun Powder Residue 28

Contract Laboratory Program (CLP) 29-32

Calibration Check Standards & Matrix Blanks 29

Verification Standards 30

Spiking Standards 30

Detection Limit Standards 31

Interference Check Standards 31

AA (GFAA) Calibration & Spiking Standards 32

CLP Complete Sets 32

EPA Method 200.7, SW-846 33-35

Calibration Standards 33

Spiking Standards 33

Interference Check Standards 34

Performance Check Standards 35

Fortifying Solution 35

ICP Multi-Element Standards 20-40

EPA Method 200.7, Revision 4.4 35-36

Calibration Standards 35

Fortifying (Spiking) Standards 36

Instrument Performance Standards 36

EPA Method 6010, Various Revisions 37-38

Calibration Standards 37

Interference Check Standards 37

Performance Check Standard 38

Interference Check Standards 38

Spiking Standards 38

TCLP 39

SDWA 40

ICP/MS Multi-Element Standards 41-44

Calibration Standards & Blanks 41

Tuning Solutions 42

Interference Check Standards 42

Memory Check Solutions 42

Spiking Standards for Water & Soil 43

Quality Control Standards 43

Internal Standards 43

EPA Method 200.8 44

EPA Method 6020 44

Petrochemical Standards 45-63

Wear Metals in Oil 46-48

Sulfur and Metals in Oil 49

Lubricating Oil Standards 50-52

Sulfur Calibration Standards 53-55

Sulfur QC Standards 56

ASTM Methods 57-63

Solid Matrix Standards 64-66

Index, Technical Reference & Ordering Back

Catalog Number Index i-iv

Periodic Table, Atomic Weights, Conversions

Ordering Information

Quotation Forms

D-2622, D-4294D-3120, D-3246D-3230D-3231D-3237D-3605D-3610D-3831

D-4628D-4629D-4927D-4929D-4951D-5056D-5059

D-5184D-5185D-5453D-5600D-5708D-5762D-5863

Page 4: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuTrace™...Setting the Standard for the Industry from the beginning...

Standards prepared under our ISO 9001 &ISO 17025 Quality System.

Most Single elementstandards have 3 Yearexpiration period.

Uncertainty reported forstatistical confidence.

Directly traceable toNIST SRM's.

Signature approval indicatingproduct integrity to specifications.

Impurity Scan for68 elements infinal solution.

Highest purity startingmaterials & matrices used.

Concentration verified bytwo independent methodsfor added insurance.

Density included for easy conversionto weight/weight applications.

Page 5: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Office Hours: Monday - Friday 8:00am - 5:30pm, ESTOrdering, Customer and Technical ServiceTelephone (Toll Free in USA) 800-442-5290Telephone (Outside USA) 203-786-5290Fax (Toll Free in USA) 877-786-5287Fax (Outside USA) 203-786-5287Email [email protected] www.AccuStandard.com

The AccuStandard AdvantageStandards are our only productThousands of Inorganic Standards – the widest selectionavailableNo across the board price increase in 20 years3-Year Shelf Life on single element ICP, AA, ICP/MS StandardsAnalytical Capability: Aqueous and Hydrocarbon Specific ICPs,Mercury Analyzer, Ion Chromatography, Karl Fisher, XOS and Antek Sulfur analyzers, Wet Chemical analysisCustom FormulationsSmall Batch sizes – Fresher LotsTechnical Service – Real World Laboratory Experience24/7 Online Access to MSDSs, COAs, Literature, product supportOn-Going stability program allowing us to provided an extended expiration periodActive Members in Professional Committes including ACS, ASTM, CRMMA and Sigma XiExperience with ASTM, EPA and AOAC methodsISO 9001:2000 and ISO 17025

Page 6: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard maintains many certifications and accreditations. These include ISO 9001 for the last 10 yearsand now: ISO 9001:2000, as well as ISO 17025:1999.

For a full size copy of the latest Certificates,visit our website at AccuStandard.com and

click “About Us”

AccuStandard Quality Systems

ISO 9001:2000

ISO 17025:1999

Page 7: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 11

SAVINGS:No Hazardous Shipping FeesLower Shipping Costs (less weight)Yields More – 500 mL from 20 mL concentrate

CONVENIENCE & ASSURANCE:Includes empty pre-washed, pre-labeled HDPE

bottle (250 mL for 10,000 µg/mL; 500 mL for 25,000 µg/mL)Certificate of Analysis with every product

NoHaz Option with Most ICP & AA Single Element Standards

HazFees

AccuTrace Documentation includes:

Tracable to NIST SRM by wet chemical assay and/or ICP, on final solution lot for single element standards, and on solution concentrates for multi-element standards.

Most AccuTrace ICP, ICP/MS and AA single element standards have 36 month stability dating. Certified in our ISO 9001 & ISO 17025 Inorganic QA/QC Laboratory.

ICPSingle Element

ICPSingle

Element

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

Element Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceAluminum 20 mL ---------- ---- ---------- ---- ICP-01N-10X-20ML $ 37 ICP-01N-25X-20ML $ 70Al(NO3)3 • 9H2O 50 mL ---------- ---- ICP-01N-10X-0.5 $ 34 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-01N-1 $ 34 ICP-01N-10X-1 59 --------------- ---- --------------- ----

500 mL ICP-01N-5 67 ICP-01N-10X-5 175 --------------- ---- --------------- ----Antimony 20 mL ---------- ---- ---------- ---- ICP-02N-10X-20ML 37 --------------- ----Sb 50 mL ---------- ---- ICP-02N-10X-0.5 36 --------------- ---- --------------- ----Dilute HNO3 tr 100 mL ICP-02N-1 34 ICP-02N-10X-1 65 --------------- ---- --------------- ----Tartaric acid 500 mL ICP-02N-5 67 ICP-02N-10X-5 135 --------------- ---- --------------- ----Arsenic 20 mL ---------- ---- ---------- ---- ICP-03N-10X-20ML 37 ICP-03N-25X-20ML 70As 50 mL ---------- ---- ICP-03N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-03N-1 34 ICP-03N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-03N-5 67 ICP-03N-10X-5 120 --------------- ---- --------------- ----Barium 20 mL ---------- ---- ---------- ---- ICP-04N-10X-20ML 37 ICP-04N-25X-20ML 70Ba(NO3)2 50 mL ---------- ---- ICP-04N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-04N-1 34 ICP-04N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-04N-5 67 ICP-04N-10X-5 120 --------------- ---- --------------- ----Beryllium 20 mL ---------- ---- ---------- ---- ICP-05N-10X-20ML 37 --------------- ----BeO(C2H3O2)6 50 mL ---------- ---- ICP-05N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-05N-1 34 ICP-05N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-05N-5 67 ICP-05N-10X-5 240 --------------- ---- --------------- ----Bismuth 20 mL ---------- ---- ---------- ---- ICP-06N-10X-20ML 37 ICP-06N-25X-20ML 70Bi 50 mL ---------- ---- ICP-06N-10X-0.5 36 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-06N-1 34 ICP-06N-10X-1 65 --------------- ---- --------------- ----

500 mL ICP-06N-5 67 ICP-06N-10X-5 135 --------------- ---- --------------- ----Boron 20 mL ---------- ---- ---------- ---- ICP-07W-10X-20ML 37 --------------- ----H3BO3 50 mL ---------- ---- ICP-07W-10X-0.5 * 32 --------------- ---- --------------- ----Water tr. NH4OH 100 mL ICP-07W-1 * 34 ICP-07W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-07W-5 * 67 ICP-07W-10X-5 * 120 --------------- ---- --------------- ----

AccuTrace Standards are traceable to NIST Reference MaterialsFormulated from Ultra High Purity Starting Materials, Water & AcidsConcentration verified by Wet Chemical & Instrumental Analysis

Packaged in specially prepared acid leached bottlesActual Lot Analysis provided on label & C of A36 Month Stability Dating

These products require a Hazardous Shipping Fee, except the “NoHaz™” products in the right columns, and products marked with an asterisk *

Single Element ICP Standards continued on next page

33’’YYeeaarrShelf Life on

ICP, ICP/MS & AASingle Element

Standards

Page 8: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

2 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

Element Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceCadmium 20 mL ---------- ---- ---------- ---- ICP-08N-10X-20ML $ 37 ICP-08N-25X-20ML $ 70Cd 50 mL ---------- ---- ICP-08N-10X-0.5 $ 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-08N-1 $ 34 ICP-08N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-08N-5 67 ICP-08N-10X-5 120 --------------- ---- --------------- ----Calcium 20 mL ---------- ---- ---------- ---- ICP-09N-10X-20ML 37 ICP-09N-25X-20ML 70CaCO3 50 mL ---------- ---- ICP-09N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-09N-1 34 ICP-09N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-09N-5 67 ICP-09N-10X-5 120 --------------- ---- --------------- ----Cerium 20 mL ---------- ---- ---------- ---- ICP-11N-10X-20ML 37 ICP-11N-25X-20ML 80Ce(NO3)3 50 mL ---------- ---- ICP-11N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-11N-1 34 ICP-11N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-11N-5 67 ICP-11N-10X-5 168 --------------- ---- --------------- ----Cesium 20 mL ---------- ---- ---------- ---- ICP-12N-10X-20ML 55 ICP-12N-25X-20ML 100CsNO3 50 mL ---------- ---- ICP-12N-10X-0.5 45 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-12N-1 42 ICP-12N-10X-1 75 --------------- ---- --------------- ----

500 mL ICP-12N-5 82 ICP-12N-10X-5 231 --------------- ---- --------------- ----Chromium 20 mL ---------- ---- ---------- ---- ICP-13N-10X-20ML 37 ICP-13N-25X-20ML 70reduced to (+3) state 50 mL ---------- ---- ICP-13N-10X-0.5 34 --------------- ---- --------------- ----

(NH4)2Cr2O7 100 mL ICP-13N-1 34 ICP-13N-10X-1 59 --------------- ---- --------------- ----2-5% Nitric acid 500 mL ICP-13N-5 67 ICP-13N-10X-5 125 --------------- ---- --------------- ----Cobalt 20 mL ---------- ---- ---------- ---- ICP-14N-10X-20ML 37 ICP-14N-25X-20ML 70Co 50 mL ---------- ---- ICP-14N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-14N-1 34 ICP-14N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-14N-5 67 ICP-14N-10X-5 168 --------------- ---- --------------- ----Copper 20 mL ---------- ---- ---------- ---- ICP-15N-10X-20ML 37 ICP-15N-25X-20ML 70Cu 50 mL ---------- ---- ICP-15N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-15N-1 34 ICP-15N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-15N-5 67 ICP-15N-10X-5 120 --------------- ---- --------------- ----Dysprosium 20 mL ---------- ---- ---------- ---- ICP-16N-10X-20ML 55 ICP-16N-25X-20ML 100Dy2O3 50 mL ---------- ---- ICP-16N-10X-0.5 45 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-16N-1 42 ICP-16N-10X-1 75 --------------- ---- --------------- ----

500 mL ICP-16N-5 82 ICP-16N-10X-5 231 --------------- ---- --------------- ----Erbium 20 mL ---------- ---- ---------- ---- ICP-17N-10X-20ML 55 ICP-17N-25X-20ML 100Er2O3 50 mL ---------- ---- ICP-17N-10X-0.5 52 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-17N-1 42 ICP-17N-10X-1 85 --------------- ---- --------------- ----

500 mL ICP-17N-5 82 ICP-17N-10X-5 259 --------------- ---- --------------- ----Europium 20 mL ---------- ---- ---------- ---- ICP-18N-10X-20ML 55 ICP-18N-25X-20ML 100Eu2O3 50 mL ---------- ---- ICP-18N-10X-0.5 52 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-18N-1 42 ICP-18N-10X-1 85 --------------- ---- --------------- ----

500 mL ICP-18N-5 82 ICP-18N-10X-5 185 --------------- ---- --------------- ----Gadolinium 20 mL ---------- ---- ---------- ---- ICP-19N-10X-20ML 55 ICP-19N-25X-20ML 100Gd2O3 50 mL ---------- ---- ICP-19N-10X-0.5 69 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-19N-1 42 ICP-19N-10X-1 115 --------------- ---- --------------- ----

500 mL ICP-19N-5 82 ICP-19N-10X-5 315 --------------- ---- --------------- ----Gallium 20 mL ---------- ---- ---------- ---- ICP-20N-10X-20ML 55 --------------- ----Ga 50 mL ---------- ---- ICP-20N-10X-0.5 45 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-20N-1 42 ICP-20N-10X-1 75 --------------- ---- --------------- ----

500 mL ICP-20N-5 82 ICP-20N-10X-5 165 --------------- ---- --------------- ----Germanium 20 mL ---------- ---- ---------- ---- ICP-21W-10X-20ML 55 --------------- ----(NH4)2GeF6 50 mL ---------- ---- ICP-21W-10X-0.5 * 52 --------------- ---- --------------- ----Water tr. HF 100 mL ICP-21W-1 * 42 ICP-21W-10X-1 * 85 --------------- ---- --------------- ----

500 mL ICP-21W-5 * 82 ICP-21W-10X-5 * 231 --------------- ---- --------------- ----Gold 20 mL ---------- ---- ---------- ---- ICP-22H-10X-20ML 95 ICP-22H-25X-20ML 165Au 50 mL ---------- ---- ICP-22H-10X-0.5 175 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-22H-1 78 ICP-22H-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-22H-5 152 ICP-22H-10X-5 695 --------------- ---- --------------- ----Hafnium 20 mL ---------- ---- ---------- ---- ICP-23N-10X-20ML 75 ICP-23N-25X-20ML 135HfO2 50 mL ---------- ---- ICP-23N-10X-0.5 80 --------------- ---- --------------- ----2-5% Nitric acid tr. HF 100 mL ICP-23N-1 60 ICP-23N-10X-1 135 --------------- ---- --------------- ----

500 mL ICP-23N-5 118 ICP-23N-10X-5 364 --------------- ---- --------------- ----Holmium 20 mL ---------- ---- ---------- ---- ICP-24N-10X-20ML 55 ICP-24N-25X-20ML 100Ho2O3 50 mL ICP-24N-10X-0.5 52 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-24N-1 42 ICP-24N-10X-1 85 --------------- ---- --------------- ----

500 mL ICP-24N-5 82 ICP-24N-10X-5 259 --------------- ---- --------------- ----Indium 20 mL ---------- ---- ---------- ---- ICP-25N-10X-20ML 55 ICP-25N-25X-20ML 100In 50 mL ---------- ---- ICP-25N-10X-0.5 52 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-25N-1 42 ICP-25N-10X-1 85 --------------- ---- --------------- ----

500 mL ICP-25N-5 82 ICP-25N-10X-5 185 --------------- ---- --------------- ----

These products require a Hazardous Shipping Fee, except the “NoHaz™” products in the right columns, and products marked with an asterisk *

AccuTrace Standards are traceable to NIST Reference MaterialsFormulated from Ultra High Purity Starting Materials, Water & AcidsConcentration verified by Wet Chemical & Instrumental Analysis

Packaged in specially prepared acid leached bottlesActual Lot Analysis provided on label & C of A36 Month Stability Dating

ICPSingle Element

ICP Single Element

Page 9: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 3

Element Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceIridium 20 mL ---------- ---- ---------- ---- ICP-26H-10X-20ML $ 95 ICP-26H-25X-20ML $ 175IrCl3 • 3H20 50 mL ---------- ---- ICP-26H-10X-0.5 $ 175 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-26H-1 $ 78 ICP-26H-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-26H-5 152 ICP-26H-10X-5 695 --------------- ---- --------------- ----Iron 20 mL ---------- ---- ---------- ---- ICP-27N-10X-20ML 37 ICP-27N-25X-20ML 70Fe 50 mL ---------- ---- ICP-27N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-27N-1 34 ICP-27N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-27N-5 67 ICP-27N-10X-5 120 --------------- ---- --------------- ----Lanthanum 20 mL ---------- ---- ---------- ---- ICP-28N-10X-20ML 37 ICP-28N-25X-20ML 80La2O3 50 mL ---------- ---- ICP-28N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-28N-1 34 ICP-28N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-28N-5 67 ICP-28N-10X-5 168 --------------- ---- --------------- ----Lead 20 mL ---------- ---- ---------- ---- ICP-29N-10X-20ML 37 ICP-29N-25X-20ML 70Pb(NO3)2 50 mL ---------- ---- ICP-29N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-29N-1 34 ICP-29N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-29N-5 67 ICP-29N-10X-5 168 --------------- ---- --------------- ----Lithium 20 mL ---------- ---- ---------- ---- ICP-30N-10X-20ML 37 ICP-30N-25X-20ML 70Li2CO3 50 mL ---------- ---- ICP-30N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-30N-1 34 ICP-30N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-30N-5 67 ICP-30N-10X-5 120 --------------- ---- --------------- ----Lutetium 20 mL ---------- ---- ---------- ---- ICP-31N-10X-20ML 90 ICP-31N-25X-20ML 300Lu2O3 50 mL ---------- ---- ICP-31N-10X-0.5 175 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-31N-1 75 ICP-31N-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-31N-5 285 ICP-31N-10X-5 1393 --------------- ---- --------------- ----Magnesium 20 mL ---------- ---- ---------- ---- ICP-32N-10X-20ML 37 ICP-32N-25X-20ML 70MgO 50 mL ---------- ---- ICP-32N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-32N-1 34 ICP-32N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-32N-5 67 ICP-32N-10X-5 120 --------------- ---- --------------- ----Manganese 20 mL ---------- ---- ---------- ---- ICP-33N-10X-20ML 37 ICP-33N-25X-20ML 70Mn(C2H3O2)2 50 mL ---------- ---- ICP-33N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-33N-1 34 ICP-33N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-33N-5 67 ICP-33N-10X-5 168 --------------- ---- --------------- ----Mercury 20 mL ---------- ---- ---------- ---- ICP-34N-10X-20ML 37 ICP-34N-25X-20ML 70Hg 50 mL ---------- ---- ICP-34N-10X-0.5 32 --------------- ---- --------------- ----10% Nitric acid 100 mL ICP-34N-1 34 ICP-34N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-34N-5 67 ICP-34N-10X-5 120 --------------- ---- --------------- ----Molybdenum 20 mL ---------- ---- ---------- ---- ICP-35W-10X-20ML 37 ICP-35W-25X-20ML 70(NH4)2MoO4 50 mL ---------- ---- ICP-35W-10X-0.5 * 32 --------------- ---- --------------- ----Water tr. NH4OH 100 mL ICP-35W-1 * 34 ICP-35W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-35W-5 * 67 ICP-35W-10X-5 * 120 --------------- ---- --------------- ----Neodymium 20 mL ---------- ---- ---------- ---- ICP-36N-10X-20ML 37 ICP-36N-25X-20ML 80Nd2O3 50 mL ---------- ---- ICP-36N-10X-0.5 45 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-36N-1 34 ICP-36N-10X-1 75 --------------- ---- --------------- ----

500 mL ICP-36N-5 67 ICP-36N-10X-5 203 --------------- ---- --------------- ----Nickel 20 mL ---------- ---- ---------- ---- ICP-37N-10X-20ML 37 ICP-37N-25X-20ML 70Ni 50 mL ---------- ---- ICP-37N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-37N-1 34 ICP-37N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-37N-5 67 ICP-37N-10X-5 120 --------------- ---- --------------- ----Niobium 20 mL ---------- ---- ---------- ---- ICP-38W-10X-20ML 37 ICP-38W-25X-20ML 80Nb2O5 50 mL ---------- ---- ICP-38W-10X-0.5 * 38 --------------- ---- --------------- ----Water tr. HF 100 mL ICP-38W-1 * 34 ICP-38W-10X-1 * 64 --------------- ---- --------------- ----

500 mL ICP-38W-5 * 67 ICP-38W-10X-5 * 175 --------------- ---- --------------- ----Palladium 20 mL ---------- ---- ---------- ---- ICP-40H-10X-20ML 95 ICP-40H-25X-20ML 165Pd 50 mL ---------- ---- ICP-40H-10X-0.5 175 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-40H-1 78 ICP-40H-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-40H-5 152 ICP-40H-10X-5 973 --------------- ---- --------------- ----Phosphorus 20 mL ---------- ---- ---------- ---- ICP-41W-10X-20ML 37 --------------- ----NH4H2PO4 50 mL ---------- ---- ICP-41W-10X-0.5 * 32 --------------- ---- --------------- ----Water 100 mL ICP-41W-1 * 34 ICP-41W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-41W-5 * 67 ICP-41W-10X-5 * 120 --------------- ---- --------------- ----Platinum 20 mL ---------- ---- ---------- ---- ICP-42H-10X-20ML 95 ICP-42H-25X-20ML 165Pt 50 mL ---------- ---- ICP-42H-10X-0.5 175 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-42H-1 78 ICP-42H-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-42H-5 152 ICP-42H-10X-5 695 --------------- ---- --------------- ----Potassium 20 mL ---------- ---- ---------- ---- ICP-43N-10X-20ML 37 ICP-43N-25X-20ML 70KNO3 50 mL ---------- ---- ICP-43N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-43N-1 34 ICP-43N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-43N-5 67 ICP-43N-10X-5 120 --------------- ---- --------------- ----Praseodymium 20 mL ---------- ---- ---------- ---- ICP-44N-10X-20ML 55 ICP-44N-25X-20ML 100Pr6O11 50 mL ---------- ---- ICP-44N-10X-0.5 72 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-44N-1 42 ICP-44N-10X-1 120 --------------- ---- --------------- ----

500 mL ICP-44N-5 82 ICP-44N-10X-5 329 --------------- ---- --------------- ----

ICPSingle Element

ICP Single Element

Single Element ICP Standards continued on next page

Page 10: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

4 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

Element Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceRhenium 20 mL ---------- ---- ---------- ---- ICP-45W-10X-20ML $ 95 ICP-45W-25X-20ML $ 175Re 50 mL ---------- ---- ICP-45W-10X-0.5 * $ 175 --------------- ---- --------------- ----Water 100 mL ICP-45W-1 * $ 78 ICP-45W-10X-1 * 295 --------------- ---- --------------- ----

500 mL ICP-45W-5 * 152 ICP-45W-10X-5 * 695 --------------- ---- --------------- ----Rhodium 20 mL ---------- ---- ---------- ---- ICP-46H-10X-20ML 250 ICP-46H-25X-20ML 475RhCl3 • 3H2O 50 mL ---------- ---- ICP-46H-10X-0.5 315 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-46H-1 190 ICP-46H-10X-1 525 --------------- ---- --------------- ----

500 mL ICP-46H-5 425 ICP-46H-10X-5 2050 --------------- ---- --------------- ----Rubidium 20 mL ---------- ---- ---------- ---- ICP-47N-10X-20ML 37 ICP-47N-25X-20ML 80RbNO3 50 mL ---------- ---- ICP-47N-10X-0.5 52 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-47N-1 36 ICP-47N-10X-1 85 --------------- ---- --------------- ----

500 mL ICP-47N-5 70 ICP-47N-10X-5 175 --------------- ---- --------------- ----Ruthenium 20 mL ---------- ---- ---------- ---- ICP-48H-10X-20ML 95 ICP-48H-25X-20ML 185RuCl3 • 3H2O 50 mL ---------- ---- ICP-48H-10X-0.5 175 --------------- ---- --------------- ----10% HCl 100 mL ICP-48H-1 78 ICP-48H-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-48H-5 152 ICP-48H-10X-5 695 --------------- ---- --------------- ----Samarium 20 mL ---------- ---- ---------- ---- ICP-49N-10X-20ML 55 ICP-49N-25X-20ML 100Sm2O3 50 mL ---------- ---- ICP-49N-10X-0.5 45 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-49N-1 42 ICP-49N-10X-1 75 --------------- ---- --------------- ----

500 mL ICP-49N-5 82 ICP-49N-10X-5 231 --------------- ---- --------------- ----Scandium 20 mL ---------- ---- ---------- ---- ICP-50N-10X-20ML 95 ICP-50N-25X-20ML 175Sc2O3 50 mL ---------- ---- ICP-50N-10X-0.5 175 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-50N-1 78 ICP-50N-10X-1 295 --------------- ---- --------------- ----

500 mL ICP-50N-5 152 ICP-50N-10X-5 973 --------------- ---- --------------- ----Selenium 20 mL ---------- ---- ---------- ---- ICP-51N-10X-20ML 37 ICP-51N-25X-20ML 70Se 50 mL ---------- ---- ICP-51N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-51N-1 34 ICP-51N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-51N-5 67 ICP-51N-10X-5 120 --------------- ---- --------------- ----Silicon 20 mL ---------- ---- ---------- ---- ICP-52W-10X-20ML 37 --------------- ----(NH4)2SiF6 50 mL ---------- ---- ICP-52W-10X-0.5 * 32 --------------- ---- --------------- ----Water tr. HF 100 mL ICP-52W-1 * 34 ICP-52W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-52W-5 * 67 ICP-52W-10X-5 * 168 --------------- ---- --------------- ----Silver 20 mL ---------- ---- ---------- ---- ICP-53N-10X-20ML 37 ICP-53N-25X-20ML 70AgNO3 50 mL ---------- ---- ICP-53N-10X-0.5 42 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-53N-1 34 ICP-53N-10X-1 70 --------------- ---- --------------- ----

500 mL ICP-53N-5 67 ICP-53N-10X-5 145 --------------- ---- --------------- ----Sodium 20 mL ---------- ---- ---------- ---- ICP-54N-10X-20ML 37 ICP-54N-25X-20ML 70NaNO3 50 mL ---------- ---- ICP-54N-10X-0.5 34 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-54N-1 34 ICP-54N-10X-1 59 --------------- ---- --------------- ----

500 mL ICP-54N-5 67 ICP-54N-10X-5 175 --------------- ---- --------------- ----Strontium 20 mL ---------- ---- ---------- ---- ICP-55N-10X-20ML 37 ICP-55N-25X-20ML 70Sr(NO3)2 50 mL ---------- ---- ICP-55N-10X-0.5 42 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-55N-1 34 ICP-55N-10X-1 70 --------------- ---- --------------- ----

500 mL ICP-55N-5 67 ICP-55N-10X-5 203 --------------- ---- --------------- ----Sulfur 20 mL ---------- ---- ---------- ---- ICP-56W-10X-20ML 37 ICP-56W-25X-20ML 70(NH4)2SO4 50 mL ---------- ---- ICP-56W-10X-0.5 * 32 --------------- ---- --------------- ----Water 100 mL ICP-56W-1 * 34 ICP-56W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-56W-5 * 67 ICP-56W-10X-5 * 120 --------------- ---- --------------- ----Tantalum 20 mL ---------- ---- ---------- ---- ICP-57W-10X-20ML 55 ICP-57W-25X-20ML 100Ta 50 mL ---------- ---- ICP-57W-10X-0.5 * 52 --------------- ---- --------------- ----Water tr. HF 100 mL ICP-57W-1 * 42 ICP-57W-10X-1 * 85 --------------- ---- --------------- ----

500 mL ICP-57W-5 * 82 ICP-57W-10X-5 * 224 --------------- ---- --------------- ----Tellurium 20 mL ---------- ---- ---------- ---- ICP-58H-10X-20ML 37Te 50 mL ---------- ---- ICP-58H-10X-0.5 46 --------------- ---- --------------- ----10% HCl (min.) 100 mL ICP-58H-1 34 ICP-58H-10X-1 78 --------------- ---- --------------- ----

500 mL ICP-58H-5 67 ICP-58H-10X-5 210 --------------- ---- --------------- ----Terbium 20 mL ---------- ---- ---------- ---- ICP-59N-10X-20ML 55 ICP-59N-25X-20ML 100Tb4O7 50 mL ---------- ---- ICP-59N-10X-0.5 69 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-59N-1 42 ICP-59N-10X-1 115 --------------- ---- --------------- ----

500 mL ICP-59N-5 82 ICP-59N-10X-5 315 --------------- ---- --------------- ----Thallium 20 mL ---------- ---- ---------- ---- ICP-60N-10X-20ML 37 ICP-60N-25X-20ML 70Tl 50 mL ---------- ---- ICP-60N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-60N-1 34 ICP-60N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-60N-5 67 ICP-60N-10X-5 125 --------------- ---- --------------- ----Thorium 100 mL ICP-61N-1 34 ---------- ---- --------------- ---- --------------- ----Th(NO3)4 • 4H2O 500 mL ICP-61N-5 67 ---------- ---- --------------- ---- --------------- ----2-5% Nitric acid ---------- ---- ---------- ---- --------------- ---- --------------- ----

AccuTrace Standards are traceable to NIST Reference MaterialsFormulated from Ultra High Purity Starting Materials, Water & AcidsConcentration verified by Wet Chemical & Instrumental Analysis

Packaged in specially prepared acid leached bottlesActual Lot Analysis provided on label & C of A36 Month Stability Dating

ICPSingle Element

ICP Single Element

These products require a Hazardous Shipping Fee, except the “NoHaz™” products in the right columns, and products marked with an asterisk *

Page 11: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 5

Element Unit Cat. No. Price Cat. No. Price Cat. No. Price Cat. No. PriceThulium 20 mL ---------- ---- ---------- ---- ICP-62N-10X-20ML $ 75 ICP-62N-25X-20ML $ 135Tm2O3 50 mL ---------- ---- ICP-62N-10X-0.5 $ 78 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-62N-1 $ 58 ICP-62N-10X-1 130 --------------- ---- --------------- ----

500 mL ICP-62N-5 120 ICP-62N-10X-5 250 --------------- ---- --------------- ----Tin ---------- ---- ---------- ---- ICP-63N-10X-20ML 37 ICP-63N-25X-20ML 70Sn 50 mL ---------- ---- ICP-63N-10X-0.5 42 --------------- ---- --------------- ----2-5% Nitric acid tr. HF 100 mL ICP-63N-1 34 ICP-63N-10X-1 70 --------------- ---- --------------- ----

500 mL ICP-63N-5 67 ICP-63N-10X-5 135 --------------- ---- --------------- ----Titanium 20 mL ---------- ---- ---------- ---- ICP-64W-10X-20ML 37 --------------- ----(NH4)2TiF6 50 mL ---------- ---- ICP-64W-10X-0.5 * 32 --------------- ---- --------------- ----Water tr. HF 100 mL ICP-64W-1 * 34 ICP-64W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-64W-5 * 67 ICP-64W-10X-5 * 120 --------------- ---- --------------- ----Tungsten 20 mL ---------- ---- ---------- ---- ICP-65W-10X-20ML 37 --------------- ----(NH4)2WO4 50 mL ---------- ---- ICP-65W-10X-0.5 * 32 --------------- ---- --------------- ----Water tr. NH4OH 100 mL ICP-65W-1 * 34 ICP-65W-10X-1 * 54 --------------- ---- --------------- ----

500 mL ICP-65W-5 * 67 ICP-65W-10X-5 * 168 --------------- ---- --------------- ----Uranium 100 mL ICP-66N-1 42 ---------- ---- --------------- ---- --------------- ----U3O8 500 mL ICP-66N-5 82 ---------- ---- --------------- ---- --------------- ----2-5% Nitric acid ---------- ---- ---------- ---- --------------- ---- --------------- ----Vanadium 20 mL ---------- ---- ---------- ---- ICP-67N-10X-20ML 37 ICP-67N-25X-20ML 70NH4VO3 50 mL ---------- ---- ICP-67N-10X-0.5 36 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-67N-1 34 ICP-67N-10X-1 65 --------------- ---- --------------- ----

500 mL ICP-67N-5 67 ICP-67N-10X-5 135 --------------- ---- --------------- ----Ytterbium 20 mL ---------- ---- ---------- ---- ICP-68N-10X-20ML 55 ICP-68N-25X-20ML 100Yb2O3 50 mL ---------- ---- ICP-68N-10X-0.5 60 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-68N-1 42 ICP-68N-10X-1 100 --------------- ---- --------------- ----

500 mL ICP-68N-5 82 ICP-68N-10X-5 273 --------------- ---- --------------- ----Yttrium 20 mL ---------- ---- ---------- ---- ICP-69N-10X-20ML 37 ICP-69N-25X-20ML 70Y2O3 50 mL ---------- ---- ICP-69N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-69N-1 34 ICP-69N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-69N-5 67 ICP-69N-10X-5 120 --------------- ---- --------------- ----Zinc 20 mL ---------- ---- ---------- ---- ICP-70N-10X-20ML 37 ICP-70N-25X-20ML 70Zn 50 mL ---------- ---- ICP-70N-10X-0.5 32 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-70N-1 34 ICP-70N-10X-1 54 --------------- ---- --------------- ----

500 mL ICP-70N-5 67 ICP-70N-10X-5 120 --------------- ---- --------------- ----Zirconium 20 mL ---------- ---- ---------- ---- ICP-71N-10X-20ML 37 ICP-71N-25X-20ML 70ZrO(NO3)2 50 mL ---------- ---- ICP-71N-10X-0.5 42 --------------- ---- --------------- ----2-5% Nitric acid 100 mL ICP-71N-1 34 ICP-71N-10X-1 70 --------------- ---- --------------- ----

500 mL ICP-71N-5 67 ICP-71N-10X-5 203 --------------- ---- --------------- ----

Mixed Acid BlankCLP-BLMA-5 $ 30 / 500 mLCLP-BLMA-L-SET $ 45 / 1L

(2 x 500 mL)

5% HCl + 1% HNO3 in ASTM Type I Water

Hydrochloric Acid BlankCLP-BLH-5 $ 30 / 500 mLCLP-BLH-L-SET $ 45 / 1L

(2 x 500 mL)

5% HCl in ASTM Type I Water

Water BlankCLP-BLW-5 * $ 30 / 500 mLCLP-BLW-L-SET * $ 40 / 1L

(2 x 500 mL)

ASTM Type I Water

Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L-SET $ 45 / 1L

(2 x 500 mL)

5% HNO3 in ASTM Type I Water

Calibration and Matrix Blanks

ICPSingle Element & Matrix Blanks

ICP Single Element

33’’YYeeaarrShelf Life on

ICP, ICP/MS & AASingle Element

Standards

Page 12: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

6 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

Element Matrix Unit Cat. No. Price Cat. No. Price Cat. No. PriceAl (Aluminum) 2% HNO3 100 mL ICP-MS-01N-0.01X-1 $ 34 ICP-MS-01N-0.1X-1 $ 45 ICP-MS-01N-1 $ 76Sb (Antimony) 2% HNO3 100 mL ICP-MS-02N-0.01X-1 34 ICP-MS-02N-0.1X-1 45 ICP-MS-02N-1 76As (Arsenic) 2% HNO3 100 mL ICP-MS-03N-0.01X-1 34 ICP-MS-03N-0.1X-1 45 ICP-MS-03N-1 76Ba (Barium) 2% HNO3 100 mL ICP-MS-04N-0.01X-1 34 ICP-MS-04N-0.1X-1 45 ICP-MS-04N-1 76Be (Beryllium) 2% HNO3 100 mL ICP-MS-05N-0.01X-1 34 ICP-MS-05N-0.1X-1 45 ICP-MS-05N-1 76Bi (Bismuth) 2% HNO3 100 mL ICP-MS-06N-0.01X-1 34 ICP-MS-06N-0.1X-1 45 ICP-MS-06N-1 76B (Boron) NEW H2O tr. NH4OH 100 mL ICP-MS-07W-0.01X-1 * 34 ICP-MS-07W-0.1X-1 * 45 ICP-MS-07W-1 * 76Cd (Cadmium) 2% HNO3 100 mL ICP-MS-08N-0.01X-1 34 ICP-MS-08N-0.1X-1 45 ICP-MS-08N-1 76Ca (Calcium) 2% HNO3 100 mL ICP-MS-09N-0.01X-1 34 ICP-MS-09N-0.1X-1 45 ICP-MS-09N-1 76Ce (Cerium) NEW 2% HNO3 100 mL ICP-MS-11N-0.01X-1 34 ICP-MS-11N-0.1X-1 45 ICP-MS-11N-1 76Cs (Cesium) NEW 2% HNO3 100 mL ICP-MS-12N-0.01X-1 42 ICP-MS-12N-0.1X-1 53 ICP-MS-12N-1 84Cr (Chromium) 2% HNO3 100 mL ICP-MS-13N-0.01X-1 34 ICP-MS-13N-0.1X-1 45 ICP-MS-13N-1 76Co (Cobalt) 2% HNO3 100 mL ICP-MS-14N-0.01X-1 34 ICP-MS-14N-0.1X-1 45 ICP-MS-14N-1 76Cu (Copper) 2% HNO3 100 mL ICP-MS-15N-0.01X-1 34 ICP-MS-15N-0.1X-1 45 ICP-MS-15N-1 76Dy (Dysprosium) NEW 2% HNO3 100 mL ICP-MS-16N-0.01X-1 42 ICP-MS-16N-0.1X-1 53 ICP-MS-16N-1 84Er (Erbium) NEW 2% HNO3 100 mL ICP-MS-17N-0.01X-1 42 ICP-MS-17N-0.1X-1 53 ICP-MS-17N-1 95Eu (Europium) NEW 2% HNO3 100 mL ICP-MS-18N-0.01X-1 42 ICP-MS-18N-0.1X-1 53 ICP-MS-18N-1 95Gd (Gadolinium) NEW 2% HNO3 100 mL ICP-MS-19N-0.01X-1 42 ICP-MS-19N-0.1X-1 53 ICP-MS-19N-1 129Ga (Gallium) NEW 2% HNO3 100 mL ICP-MS-20N-0.01X-1 42 ICP-MS-20N-0.1X-1 53 ICP-MS-20N-1 84Ge (Germanium) H2O tr. HF 100 mL ICP-MS-21W-0.01X-1 * 42 ICP-MS-21W-0.1X-1 * 53 ICP-MS-21W-1 * 84Au (Gold) 10% HCl 100 mL ICP-MS-22H-0.01X-1 78 ICP-MS-22H-0.1X-1 89 ICP-MS-22H-1 330Hf (Hafnium) NEW 2% HNO3 tr. HF 100 mL ICP-MS-23N-0.01X-1 60 ICP-MS-23N-0.1X-1 72 ICP-MS-23N-1 152Ho (Holmium) NEW 2% HNO3 100 mL ICP-MS-24N-0.01X-1 42 ICP-MS-24N-0.1X-1 53 ICP-MS-24N-1 95In (Indium) 2% HNO3 100 mL ICP-MS-25N-0.01X-1 42 ICP-MS-25N-0.1X-1 53 ICP-MS-25N-1 95Ir (Iridium) NEW 10% HCl 100 mL ICP-MS-26H-0.01X-1 78 ICP-MS-26H-0.1X-1 89 ICP-MS-26H-1 330Fe (Iron) 5% HNO3 100 mL ICP-MS-27N-0.01X-1 34 ICP-MS-27N-0.1X-1 45 ICP-MS-27N-1 76La (Lanthanum) NEW 2% HNO3 100 mL ICP-MS-28N-0.01X-1 34 ICP-MS-28N-0.1X-1 45 ICP-MS-28N-1 76Pb (Lead) 2% HNO3 100 mL ICP-MS-29N-0.01X-1 34 ICP-MS-29N-0.1X-1 45 ICP-MS-29N-1 76Li (Lithium) 2% HNO3 100 mL ICP-MS-30N-0.01X-1 34 ICP-MS-30N-0.1X-1 45 ICP-MS-30N-1 76Lu (Lutetium) NEW 2% HNO3 100 mL ICP-MS-31N-0.01X-1 75 ICP-MS-31N-0.1X-1 86 ICP-MS-31N-1 354Mg (Magnesium) 2% HNO3 100 mL ICP-MS-32N-0.01X-1 34 ICP-MS-32N-0.1X-1 45 ICP-MS-32N-1 76Mn (Manganese) 2% HNO3 100 mL ICP-MS-33N-0.01X-1 34 ICP-MS-33N-0.1X-1 45 ICP-MS-33N-1 76Hg (Mercury) 10% HNO3 100 mL ICP-MS-34N-0.01X-1 34 ICP-MS-34N-0.1X-1 45 ICP-MS-34N-1 76Mo (Molybdenum) H2O tr. NH4OH 100 mL ICP-MS-35W-0.01X-1 * 34 ICP-MS-35W-0.1X-1 * 45 ICP-MS-35W-1 * 76Nd (Neodymium) NEW 2% HNO3 100 mL ICP-MS-36N-0.01X-1 34 ICP-MS-36N-0.1X-1 45 ICP-MS-36N-1 84Ni (Nickel) 2% HNO3 100 mL ICP-MS-37N-0.01X-1 34 ICP-MS-37N-0.1X-1 45 ICP-MS-37N-1 76Nb (Niobium) NEW H2O tr. HF 100 mL ICP-MS-38W-0.01X-1 * 34 ICP-MS-38W-0.1X-1 * 45 ICP-MS-38W-1 * 76Pd (Palladium) NEW 10% HCl 100 mL ICP-MS-40H-0.01X-1 78 ICP-MS-40H-0.1X-1 89 ICP-MS-40H-1 330P (Phosphorous) H2O 100 mL ICP-MS-41W-0.01X-1 * 34 ICP-MS-41W-0.1X-1 * 45 ICP-MS-41W-1 * 76Pt (Platinum) NEW 10% HCl 100 mL ICP-MS-42H-0.01X-1 78 ICP-MS-42H-0.1X-1 89 ICP-MS-42H-1 330K (Potassium) 2% HNO3 100 mL ICP-MS-43N-0.01X-1 34 ICP-MS-43N-0.1X-1 45 ICP-MS-43N-1 76Pr (Praseodymium) NEW 2% HNO3 100 mL ICP-MS-44N-0.01X-1 42 ICP-MS-44N-0.1X-1 53 ICP-MS-44N-1 135Re (Rhenium) NEW H2O tr. HNO3 100 mL ICP-MS-45W-0.01X-1 * 78 ICP-MS-45W-0.1X-1 * 89 ICP-MS-45W-1 * 330Rh (Rhodium) 10% HCl 100 mL ICP-MS-46H-0.01X-1 190 ICP-MS-46H-0.1X-1 217 ICP-MS-46H-1 588Rb (Rubidium) NEW 2% HNO3 100 mL ICP-MS-47N-0.01X-1 36 ICP-MS-47N-0.1X-1 48 ICP-MS-47N-1 96Ru (Ruthenium) NEW 10% HCl 100 mL ICP-MS-48H-0.01X-1 78 ICP-MS-48H-0.1X-1 89 ICP-MS-48H-1 330Sm (Samarium) NEW 2% HNO3 100 mL ICP-MS-49N-0.01X-1 42 ICP-MS-49N-0.1X-1 53 ICP-MS-49N-1 84Sc (Scandium) 2% HNO3 100 mL ICP-MS-50N-0.01X-1 78 ICP-MS-50N-0.1X-1 89 ICP-MS-50N-1 330Se (Selenium) 2% HNO3 100 mL ICP-MS-51N-0.01X-1 34 ICP-MS-51N-0.1X-1 45 ICP-MS-51N-1 76Si (Silicon) NEW H2O tr. HF 100 mL ICP-MS-52W-0.01X-1 * 34 ICP-MS-52W-0.1X-1 * 45 ICP-MS-52W-1 * 76Ag (Silver) 2% HNO3 100 mL ICP-MS-53N-0.01X-1 34 ICP-MS-53N-0.1X-1 45 ICP-MS-53N-1 76Na (Sodium) 2% HNO3 100 mL ICP-MS-54N-0.01X-1 34 ICP-MS-54N-0.1X-1 45 ICP-MS-54N-1 76Sr (Strontium) 2% HNO3 100 mL ICP-MS-55N-0.01X-1 34 ICP-MS-55N-0.1X-1 45 ICP-MS-55N-1 76

AccuStandard’s ICP/MS Standards are formulated to meet the needs of this very special instrument. As matrix effect is of utmost concern, eachstandard is formulated in specially purified de-ionized 18 megohm water and Parts per Trillion acids; after both wet chemical and instrumentalanalysis, the standards are packaged in acid leached FLPE containers to provide required protection and, of course, all standards are traceable tothe National Institute of Standards and Technology (NIST) weights and Reference Materials.

Ultra Pure Matrix Traceable to NIST Reference Materials Special Packaging

100 µg/mL 1,000 µg/mL 10,000 µg/mL

ICP/MSSingle Element

These products require a Hazardous Shipping Fee, except products marked with an asterisk *

ICP/MS Single Elem

ent

Page 13: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 7

Element Matrix Unit Cat. No. Price Cat. No. Price Cat. No. PriceS (Sulphur) H2O 100 mL ICP-MS-56W-0.01X-1 * 34 ICP-MS-56W-0.1X-1 * 45 ICP-MS-56W-1 * 76Ta (Tantalum) NEW H2O tr. HF 100 mL ICP-MS-57W-0.01X-1 * 42 ICP-MS-57W-0.1X-1 * 53 ICP-MS-57W-1 * 95Te (Tellurium) NEW 20% HCl 100 mL ICP-MS-58H-0.01X-1 34 ICP-MS-58H-0.1X-1 45 ICP-MS-58H-1 84Tb (Terbium) 2% HNO3 100 mL ICP-MS-59N-0.01X-1 42 ICP-MS-59N-0.1X-1 53 ICP-MS-59N-1 129Tl (Thallium) 2% HNO3 100 mL ICP-MS-60N-0.01X-1 34 ICP-MS-60N-0.1X-1 45 ICP-MS-60N-1 76Th (Thorium) 2% HNO3 100 mL ICP-MS-61N-0.01X-1 34 ICP-MS-61N-0.1X-1 45 ---------- ----Tm (Thulium) NEW 2% HNO3 100 mL ICP-MS-62N-0.01X-1 58 ICP-MS-62N-0.1X-1 70 ICP-MS-62N-1 146Sn (Tin) 2% HNO3 tr. HF 100 mL ICP-MS-63N-0.01X-1 34 ICP-MS-63N-0.1X-1 45 ICP-MS-63N-1 76Ti (Titanium) H2O tr. HF 100 mL ICP-MS-64W-0.01X-1 * 34 ICP-MS-64W-0.1X-1 * 45 ICP-MS-64W-1 * 76W (Tungsten) NEW H2O tr. NH4OH 100 mL ICP-MS-65W-0.01X-1 * 34 ICP-MS-65W-0.1X-1 * 45 ICP-MS-65W-1 * 76U (Uranium) 2% HNO3 100 mL ICP-MS-66N-0.01X-1 42 ICP-MS-66N-0.1X-1 53 ---------- ----V (Vanadium) 2% HNO3 100 mL ICP-MS-67N-0.01X-1 34 ICP-MS-67N-0.1X-1 45 ICP-MS-67N-1 76Yb (Ytterbium) NEW 2% HNO3 100 mL ICP-MS-68N-0.01X-1 42 ICP-MS-68N-0.1X-1 53 ICP-MS-68N-1 112Y (Yttrium) 2% HNO3 100 mL ICP-MS-69N-0.01X-1 34 ICP-MS-69N-0.1X-1 45 ICP-MS-69N-1 76Zn (Zinc) 2% HNO3 100 mL ICP-MS-70N-0.01X-1 34 ICP-MS-70N-0.1X-1 45 ICP-MS-70N-1 76Zr (Zirconium) NEW 2% HNO3 100 mL ICP-MS-71N-0.01X-1 34 ICP-MS-71N-0.1X-1 45 ICP-MS-71N-1 76

100 µg/mL 1,000 µg/mL 10,000 µg/mL

ICP/MSSingle Element

ICP/MS Single Elem

ent

Custom StandardsWhen you have a need for unique Analytical Standards,let the experts at AccuStandard assist in designing yourformulation. Our technical group, with over 80 years ofcombined analytical experience, will review your request,suggest the most economical and stable formulation, andprovide pricing all within 24 hours.

For a Quick Quote, copy the custom quote form in theback of catalog and fax it back. We will get right back toyou.

Plus we typically ship within one week after order receipt.

Page 14: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

8 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

Element Unit Cat. No. Price Cat. No. Price Cat. No. PriceAluminum 20 mL ---------- ---- AA01N-10X-20ML $ 20 AA01N-25X-20ML $ 372-5% Nitric acid 100 mL AA01N-1 $ 13 -------------------- ---- -------------------- ----

500 mL AA01N-5 33 -------------------- ---- -------------------- ----Antimony 20 mL ---------- ---- AA02W-10X-20ML 20 -------------------- ----H2O tr. HNO3 tr. 100 mL AA02N-1 13 -------------------- ---- -------------------- ----Tartaric acid 500 mL AA02N-5 33 -------------------- ---- -------------------- ----Arsenic 20 mL ---------- ---- AA03N-10X-20ML 20 AA03N-25X-20ML 372-5% Nitric acid 100 mL AA03N-1 13 -------------------- ---- -------------------- ----

500 mL AA03N-5 33 -------------------- ---- -------------------- ----Barium 20 mL ---------- ---- AA04N-10X-20ML 20 AA04N-25X-20ML 372-5% Nitric acid 100 mL AA04N-1 12 -------------------- ---- -------------------- ----

500 mL AA04N-5 30 -------------------- ---- -------------------- ----Beryllium 20 mL ---------- ---- AA05N-10X-20ML 20 -------------------- ----2-5% Nitric acid 100 mL AA05N-1 19 -------------------- ---- -------------------- ----

500 mL AA05N-5 48 -------------------- ---- -------------------- ----Bismuth 20 mL ---------- ---- AA06N-10X-20ML 20 AA06N-25X-20ML 372-5% Nitric acid 100 mL AA06N-1 13 -------------------- ---- -------------------- ----

500 mL AA06N-5 33 -------------------- ---- -------------------- ----Boron 20 mL ---------- ---- AA07W-10X-20ML 20 -------------------- ----Water tr. NH4OH 100 mL AA07W-1 * 13 -------------------- ---- -------------------- ----

500 mL AA07W-5 * 33 -------------------- ---- -------------------- ----Cadmium 20 mL ---------- ---- AA08N-10X-20ML 20 AA08N-25X-20ML 372-5% Nitric acid 100 mL AA08N-1 13 -------------------- ---- -------------------- ----

500 mL AA08N-5 33 -------------------- ---- -------------------- ----Calcium 20 mL ---------- ---- AA09N-10X-20ML 20 AA09N-25X-20ML 372-5% Nitric acid 100 mL AA09N-1 12 -------------------- ---- -------------------- ----

500 mL AA09N-5 30 -------------------- ---- -------------------- ----Cerium 20 mL ---------- ---- AA11N-10X-20ML 20 AA11N-25X-20ML 452-5% Nitric acid 100 mL AA11N-1 18 -------------------- ---- -------------------- ----

500 mL AA11N-5 40 -------------------- ---- -------------------- ----Cesium 20 mL ---------- ---- AA12N-10X-20ML 35 AA12N-25X-20ML 602-5% Nitric acid 100 mL AA12N-1 15 -------------------- ---- -------------------- ----

500 mL AA12N-5 36 -------------------- ---- -------------------- ----Chromium 20 mL ---------- ---- AA13N-10X-20ML 20 AA13N-25X-20ML 372-5% Nitric acid 100 mL AA13N-1 12 -------------------- ---- -------------------- ----

500 mL AA13N-5 30 -------------------- ---- -------------------- ----Cobalt 20 mL ---------- ---- AA14N-10X-20ML 20 AA14N-25X-20ML 372-5% Nitric acid 100 mL AA14N-1 12 -------------------- ---- -------------------- ----

500 mL AA14N-5 30 -------------------- ---- -------------------- ----Copper 20 mL ---------- ---- AA15N-10X-20ML 20 AA15N-25X-20ML 372-5% Nitric acid 100 mL AA15N-1 12 -------------------- ---- -------------------- ----

500 mL AA15N-5 30 -------------------- ---- -------------------- ----Dysprosium 20 mL ---------- ---- AA16N-10X-20ML 35 AA16N-25X-20ML 602-5% Nitric acid 100 mL AA16N-1 20 -------------------- ---- -------------------- ----

500 mL AA16N-5 45 -------------------- ---- -------------------- ----Erbium 20 mL ---------- ---- AA17N-10X-20ML 35 AA17N-25X-20ML 602-5% Nitric acid 100 mL AA17N-1 20 -------------------- ---- -------------------- ----

500 mL AA17N-5 45 -------------------- ---- -------------------- ----Europium 20 mL ---------- ---- AA18N-10X-20ML 35 AA18N-25X-20ML 602-5% Nitric acid 100 mL AA18N-1 20 -------------------- ---- -------------------- ----

500 mL AA18N-5 45 -------------------- ---- -------------------- ----Gadolinium 20 mL ---------- ---- AA19N-10X-20ML 35 AA19N-25X-20ML 602-5% Nitric acid 100 mL AA19N-1 20 -------------------- ---- -------------------- ----

500 mL AA19N-5 45 -------------------- ---- -------------------- ----Gallium 20 mL ---------- ---- AA20N-10X-20ML 45 -------------------- ----2-5% Nitric acid 100 mL AA20N-1 15 -------------------- ---- -------------------- ----

500 mL AA20N-5 36 -------------------- ---- -------------------- ----Germanium 20 mL ---------- ---- AA21W-10X-20ML 35 -------------------- ----Water tr. HF 100 mL AA21W-1 * 18 -------------------- ---- -------------------- ----

500 mL AA21W-5 * 40 -------------------- ---- -------------------- ----Gold 20 mL ---------- ---- AA22H-10X-20ML 80 AA22H-25X-20ML 20010% HCl (min.) 100 mL AA22H-1 66 -------------------- ---- -------------------- ----

500 mL AA22H-5 179 -------------------- ---- -------------------- ----Hafnium 20 mL ---------- ---- AA23N-10X-20ML 60 AA23N-25X-20ML 1252-5% Nitric acid tr. HF 100 mL AA23N-1 45 -------------------- ---- -------------------- ----

500 mL AA23N-5 110 -------------------- ---- -------------------- ----

Each standard is prepared from high purity starting materials, 18 megohm de-ionized water and high purity acids. Every standard is instrumentallyassayed to verify concentration of specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.

Traceable to NIST Reference MaterialsCertificate of Analysis included

Actual Concentration AnalysisMost available in either Nitric or Hydrochloric acid matrix

These products require a Hazardous Shipping Fee, except the “NoHaz™” products in the right columns, and except products marked with an asterisk *

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

AASingle Element

AASingle

Element

33’’YYeeaarrShelf Life on

ICP, ICP/MS & AASingle Element

Standards

Page 15: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 9

AASingle Element

AA Single Element

Element Unit Cat. No. Price Cat. No. Price Cat. No. PriceHolmium 20 mL ---------- ---- AA24N-10X-20ML $ 35 AA24N-25X-20ML $ 602-5% Nitric acid 100 mL AA24N-1 $ 20 -------------------- ---- -------------------- ----

500 mL AA24N-5 45 -------------------- ---- -------------------- ----Indium 20 mL ---------- ---- AA25N-10X-20ML 35 AA25N-25X-20ML 602-5% Nitric acid 100 mL AA25N-1 18 -------------------- ---- -------------------- ----

500 mL AA25N-5 40 -------------------- ---- -------------------- ----Iridium 20 mL ---------- ---- AA26H-10X-20ML 70 AA26H-25X-20ML 16510% HCl (min.) 100 mL AA26H-1 65 -------------------- ---- -------------------- ----

500 mL AA26H-5 150 -------------------- ---- -------------------- ----Iron 20 mL ---------- ---- AA27N-10X-20ML 20 AA27N-25X-20ML 372-5% Nitric acid 100 mL AA27N-1 12 -------------------- ---- -------------------- ----

500 mL AA27N-5 30 -------------------- ---- -------------------- ----Lanthanum 20 mL ---------- ---- AA28N-10X-20ML 20 AA28N-25X-20ML 372-5% Nitric acid 100 mL AA28N-1 15 -------------------- ---- -------------------- ----

500 mL AA28N-5 36 -------------------- ---- -------------------- ----Lead 20 mL ---------- ---- AA29N-10X-20ML 20 AA29N-25X-20ML 372-5% Nitric acid 100 mL AA29N-1 12 -------------------- ---- -------------------- ----

500 mL AA29N-5 30 -------------------- ---- -------------------- ----Lithium 20 mL ---------- ---- AA30N-10X-20ML 20 AA30N-25X-20ML 372-5% Nitric acid 100 mL AA30N-1 12 -------------------- ---- -------------------- ----

500 mL AA30N-5 30 -------------------- ---- -------------------- ----Lutetium 20 mL ---------- ---- AA31N-10X-20ML 80 AA31N-25X-20ML 2752-5% Nitric acid 100 mL AA31N-1 65 -------------------- ---- -------------------- ----

500 mL AA31N-5 250 -------------------- ---- -------------------- ----Magnesium 20 mL ---------- ---- AA32N-10X-20ML 20 AA32N-25X-20ML 372-5% Nitric acid 100 mL AA32N-1 12 -------------------- ---- -------------------- ----

500 mL AA32N-5 30 -------------------- ---- -------------------- ----Manganese 20 mL ---------- ---- AA33N-10X-20ML 20 AA33N-25X-20ML 372-5% Nitric acid 100 mL AA33N-1 11 -------------------- ---- -------------------- ----

500 mL AA33N-5 28 -------------------- ---- -------------------- ----Mercury 20 mL ---------- ---- AA34N-10X-20ML 20 AA34N-25X-20ML 372-5% Nitric acid 100 mL AA34N-1 13 -------------------- ---- -------------------- ----

500 mL AA34N-5 33 -------------------- ---- -------------------- ----Molybdenum 20 mL ---------- ---- AA35W-10X-20ML 20 AA35W-25X-20ML 37Water tr. NH4OH 100 mL AA35W-1 * 13 -------------------- ---- -------------------- ----

500 mL AA35W-5 * 33 -------------------- ----Neodymium 20 mL ---------- ---- AA36N-10X-20ML 25 AA36N-25X-20ML 502-5% Nitric acid 100 mL AA36N-1 20 -------------------- ---- -------------------- ----

500 mL AA36N-5 45 -------------------- ---- -------------------- ----Nickel 20 mL ---------- ---- AA37N-10X-20ML 20 AA37N-25X-20ML 372-5% Nitric acid 100 mL AA37N-1 12 -------------------- ---- -------------------- ----

500 mL AA37N-5 30 -------------------- ---- -------------------- ----Niobium 20 mL ---------- ---- AA38W-10X-20ML 20 AA38W-25X-20ML 37Water tr. HF 100 mL AA38W-1 * 15 -------------------- ---- -------------------- ----

500 mL AA38W-5 * 36 -------------------- ---- -------------------- ----Palladium 20 mL ---------- ---- AA40H-10X-20ML 80 AA40H-25X-20ML 17510% HCl (min.) 100 mL AA40H-1 62 -------------------- ---- -------------------- ----

500 mL AA40H-5 145 -------------------- ---- -------------------- ----Phosphorus 20 mL ---------- ---- AA41W-10X-20ML 20 -------------------- ----Water 100 mL AA41W-1 * 13 -------------------- ---- -------------------- ----

500 mL AA41W-5 * 33 -------------------- ---- -------------------- ----Platinum 20 mL ---------- ---- AA42H-10X-20ML 80 AA42H-25X-20ML 17510% HCl (min.) 100 mL AA42H-1 62 -------------------- ---- -------------------- ----

500 mL AA42H-5 145 -------------------- ---- -------------------- ----Potassium 20 mL ---------- ---- AA43N-10X-20ML 20 AA43N-25X-20ML 372-5% Nitric acid 100 mL AA43N-1 12 -------------------- ---- -------------------- ----

500 mL AA43N-5 30 -------------------- ---- -------------------- ----Praseodymium 20 mL ---------- ---- AA44N-10X-20ML 35 AA44N-25X-20ML 602-5% Nitric acid 100 mL AA44N-1 20 -------------------- ---- -------------------- ----

500 mL AA44N-5 45 -------------------- ---- -------------------- ----Rhenium 20 mL ---------- ---- AA45W-10X-20ML 80 AA45W-25X-20ML 175Water 100 mL AA45W-1 * 65 -------------------- ---- -------------------- ----

500 mL AA45W-5 * 150 -------------------- ---- -------------------- ----Rhodium 20 mL ---------- ---- AA46H-10X-20ML 210 AA46H-25X-20ML 42510% HCl (min.) 100 mL AA46H-1 80 -------------------- ---- -------------------- ----

500 mL AA46H-5 385 -------------------- ---- -------------------- ----

Each standard is prepared from high purity starting material, 18 megohm de-ionized water and high purity acids. Every standard is instrumentallyassayed to verify concentration of specified element. Actual Lot Analysis is provided on the label and a Certificate of Analysis is included for ease ofrecord keeping and availability at audits.

Traceable to NIST Reference MaterialsCertificate of Analysis included

Actual Concentration AnalysisMost available in either Nitric or Hydrochloric acid matrix

HazFees

These products require aHazardous Shipping Fee,except the “NoHaz™”products in the rightcolumns, and productsmarked with an asterisk.

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

Page 16: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

10 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

AASingle Element

Element Unit Cat. No. Price Cat. No. Price Cat. No. PriceRubidium 20 mL ---------- ---- AA47N-10X-20ML $ 20 AA47N-25X-20ML $ 372-5% Nitric acid 100 mL AA47N-1 $ 15 -------------------- ---- -------------------- ----

500 mL AA47N-5 36 -------------------- ---- -------------------- ----Ruthenium 20 mL ---------- ---- AA48H-10X-20ML 80 AA48H-25X-20ML 16510% HCl 100 mL AA48H-1 65 -------------------- ---- -------------------- ----

500 mL AA48H-5 150 -------------------- ---- -------------------- ----Samarium 20 mL ---------- ---- AA49N-10X-20ML 35 AA49N-25X-20ML 602-5% Nitric acid 100 mL AA49N-1 20 -------------------- ---- -------------------- ----

500 mL AA49N-5 45 -------------------- ---- -------------------- ----Scandium 20 mL ---------- ---- AA50N-10X-20ML 75 AA50N-25X-20ML 1602-5% Nitric acid 100 mL AA50N-1 62 -------------------- ---- -------------------- ----

500 mL AA50N-5 145 -------------------- ---- -------------------- ----Selenium 20 mL ---------- ---- AA51N-10X-20ML 20 AA51N-25X-20ML 502-5% Nitric acid 100 mL AA51N-1 19 -------------------- ---- -------------------- ----

500 mL AA51N-5 46 -------------------- ---- -------------------- ----Silicon 20 mL ---------- ---- AA52W-10X-20ML 20 -------------------- ----Water tr. HF 100 mL AA52W-1 * 13 -------------------- ---- -------------------- ----

500 mL AA52W-5 * 33 -------------------- ---- -------------------- ----Silver 20 mL ---------- ---- AA53N-10X-20ML 20 AA53N-25X-20ML 452-5% Nitric acid 100 mL AA53N-1 16 -------------------- ---- -------------------- ----

500 mL AA53N-5 40 -------------------- ---- -------------------- ----Sodium 20 mL ---------- ---- AA54N-10X-20ML 20 AA54N-25X-20ML 372-5% Nitric acid 100 mL AA54N-1 13 -------------------- ---- -------------------- ----

500 mL AA54N-5 33 -------------------- ---- -------------------- ----Strontium 20 mL ---------- ---- AA55N-10X-20ML 20 AA55N-25X-20ML 372-5% Nitric acid 100 mL AA55N-1 12 -------------------- ---- -------------------- ----

500 mL AA55N-5 30 -------------------- ---- -------------------- ----Sulfur 20 mL ---------- ---- AA56W-10X-20ML 20 AA56W-25X-20ML 37Water 100 mL AA56W-1 * 15 -------------------- ---- -------------------- ----

500 mL AA56W-5 * 35 -------------------- ---- -------------------- ----Tantalum 20 mL ---------- ---- AA57W-10X-20ML 35 AA57W-25X-20ML 60Water tr. HF 100 mL AA57W-1 * 15 -------------------- ---- -------------------- ----

500 mL AA57W-5 * 35 -------------------- ---- -------------------- ----Tellurium 20 mL ---------- ---- AA58H-10X-20ML 20 -------------------- ----10% HCl (min.) 100 mL AA58H-1 15 -------------------- ---- -------------------- ----

500 mL AA58H-5 35 -------------------- ---- -------------------- ----Terbium 20 mL ---------- ---- AA59N-10X-20ML 35 AA59N-25X-20ML 602-5% Nitric acid 100 mL AA59N-1 20 -------------------- ---- -------------------- ----

500 mL AA59N-5 45 -------------------- ---- -------------------- ----Thallium 20 mL ---------- ---- AA60N-10X-20ML 20 AA60N-25X-20ML 372-5% Nitric acid 100 mL AA60N-1 15 -------------------- ---- -------------------- ----

500 mL AA60N-5 35 -------------------- ---- -------------------- ----Thorium 20 mL ---------- ---- -------------------- ---- -------------------- ----2-5% Nitric acid 100 mL AA61N-1 20 -------------------- ---- -------------------- ----

500 mL AA61N-5 45 -------------------- ---- -------------------- ----Thulium 20 mL ---------- ---- AA62N-10X-20ML 65 AA62N-25X-20ML 1502-5% Nitric acid 100 mL AA62N-1 60 -------------------- ---- -------------------- ----

500 mL AA62N-5 135 -------------------- ---- -------------------- ----Tin 20 mL ---------- ---- AA63N-10X-20ML 20 AA63N-25X-20ML 502-5% Nitric acid tr. HF 100 mL AA63N-1 19 -------------------- ---- -------------------- ----

500 mL AA63N-5 46 -------------------- ---- -------------------- ----Titanium 20 mL ---------- ---- AA64W-10X-20ML 20 -------------------- ----Water tr. HF 100 mL AA64W-1 * 13 -------------------- ---- -------------------- ----

500 mL AA64W-5 * 33 -------------------- ---- -------------------- ----Tungsten 20 mL ---------- ---- AA65W-10X-20ML 20 -------------------- ----Water tr. NH4OH 100 mL AA65W-1 * 15 -------------------- ---- -------------------- ----

500 mL AA65W-5 * 35 -------------------- ---- -------------------- ----Uranium 20 mL ---------- ---- -------------------- ---- -------------------- ----2-5% Nitric acid 100 mL AA66N-1 15 -------------------- ---- -------------------- ----

500 mL AA66N-5 35 -------------------- ---- -------------------- ----Vanadium 20 mL ---------- ---- AA67N-10X-20ML 20 AA67N-25X-20ML 372-5% Nitric acid 100 mL AA67N-1 13 -------------------- ---- -------------------- ----

500 mL AA67N-5 33 -------------------- ---- -------------------- ----Ytterbium 20 mL ---------- ---- AA68N-10X-20ML 35 AA68N-25X-20ML 602-5% Nitric acid 100 mL AA68N-1 20 -------------------- ---- -------------------- ----

500 mL AA68N-5 45 -------------------- ---- -------------------- ----Yttrium 20 mL ---------- ---- AA69N-10X-20ML 20 AA69N-25X-20ML 372-5% Nitric acid 100 mL AA69N-1 15 -------------------- ---- -------------------- ----

500 mL AA69N-5 35 -------------------- ---- -------------------- ----Zinc 20 mL ---------- ---- AA70N-10X-20ML 20 AA70N-25X-20ML 372-5% Nitric acid 100 mL AA70N-1 13 -------------------- ---- -------------------- ----

500 mL AA70N-5 33 -------------------- ---- -------------------- ----Zirconium 20 mL ---------- ---- AA71N-10X-20ML 20 AA71N-25X-20ML 372-5% Nitric acid 100 mL AA71N-1 15 -------------------- ---- -------------------- ----

500 mL AA71N-5 35 -------------------- ---- -------------------- ----

HazFees

These products require aHazardous Shipping Fee,except the “NoHaz™”products in the rightcolumns, and productsmarked with an asterisk.

AA Single Element

Starting Material

Matrix 1000 µg/mL 10,000 µg/mL 25,000 µg/mL

NoHaz Size (No Hazardous shipping charge)

33’’YYeeaarrShelf Life on

ICP, ICP/MS & AASingle Element

Standards

Page 17: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 11

AAMatrix Modifier & Calibration

AA

Modifier Description Modifier Source Unit Cat. No. PriceAmmonium dihydrogen phosphate, NH4H2PO4 50 mL MOD-02-0.5 $ 22540% in H2O 100 mL MOD-02-1 375

500 mL MOD-02-5 535Ammonium nitrate, 5% in H2O NH4NO3 50 mL MOD-03-0.5 165

100 mL MOD-03-1 270500 mL MOD-03-5 385

Calcium nitrate, 2% Ca in 5% in HNO3 Ca(NO3)2 • 4H2O 50 mL MOD-04-0.5 140100 mL MOD-04-1 235500 mL MOD-04-5 340

Lanthanum chloride, 5% La in 5% HCl LaCl 50 mL MOD-05-0.5 165100 mL MOD-05-1 270500 mL MOD-05-5 385

Lanthanum nitrate, 5% La in 5% HNO3 LaNO3 50 mL MOD-06-0.5 165100 mL MOD-06-1 270500 mL MOD-06-5 385

Magnesium nitrate, 2% Mg in 5% HNO3 Mg(NO3)2 50 mL MOD-07-0.5 90100 mL MOD-07-1 150500 mL MOD-07-5 210

Nickel nitrate, 5% Ni in HNO3 Ni(NO3)2 50 mL MOD-08-0.5 160100 mL MOD-08-1 265500 mL MOD-08-5 375

Palladium nitrate, 0.2% Pd in 5% HNO3 Pd(NO3)2 50 mL MOD-09A-0.5 60100 mL MOD-09A-1 95500 mL MOD-09A-5 135

Palladium nitrate, 0.5% Pd in 5% HNO3 Pd(NO3)2 50 mL MOD-09B-0.5 120100 mL MOD-09B-1 200500 mL MOD-09B-5 285

Palladium nitrate, 1.0% Pd in 5% HNO3 Pd(NO3)2 50 mL MOD-09C-0.5 225100 mL MOD-09C-1 375500 mL MOD-09C-5 890

GFAA Postdigestion SpikeSolution(2 x CRDL except for Lead)CLP-SP2-AA $ 44 / 50 mL6 component in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 120 217.581As (Arsenic) 20 189.042Cd (Cadmium) 10 214.438Pb (Lead) 20 220.353Se (Selenium) 10 196.090Tl (Thallium) 20 351.924

GFAA Mercury Standard forCalibration or SpikingCLP-HG-AA $ 44 / 50 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 100 194.232

GFAA Initial CalibrationVerification(Meets CLP Second Source Requirements)CLP-ICV-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 50 217.581As (Arsenic) 25 189.042Cd (Cadmium) 5 214.438Pb (Lead) 25 220.353Se (Selenium) 50 196.090Tl (Thallium) 25 351.924

GFAA Set CLP-AA-SET $ 175 / 5 x 50 mLSet includes:

CLP-CAL-AACLP-SP1-AACLP-ICV-AA

CLP-HG-AACLP-SP2-AA

Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L-SET $ 45 / L (2 x 500 mL)

5% HNO3 in ASTM Type I Water

Water BlankCLP-BLW-5 * $ 30 / 500 mLCLP-BLW-L-SET * $ 40 / L (2 x 500 mL)

ASTM Type I Water

Hydrochloric Acid BlankCLP-BLH-5 $ 30 / 500 mLCLP-BLH-L-SET $ 45 / L (2 x 500 mL)

5% HCl in ASTM Type I Water

Mixed Acid BlankCLP-BLMA-5 $ 30 / 500 mLCLP-BLMA-L-SET $ 45 / L (2 x 500 mL)

5% HCl + 1% HNO3 in ASTM Type I Water

GFAA Instrument CalibrationStandardCLP-CAL-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 217.581As (Arsenic) 50 189.042Cd (Cadmium) 10 214.438Pb (Lead) 50 220.353Se (Selenium) 100 196.090Tl (Thallium) 50 351.924

GFAA Predigestion SpikeSolutionCLP-SP1-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 217.581As (Arsenic) 40 189.042Cd (Cadmium) 5 214.438Pb (Lead) 20 220.353Se (Selenium) 10 196.090Tl (Thallium) 50 351.924

These Matrix Modifiers enhance sensitivity and suppress background interferences observed intrace metal analysis.

Matrix Modifier Solutions for Graphite Furnace AA Calibration and Matrix Blanks

Multi-Element Standards for Spikes & CFAA Calibration Standards

If you need an element that is not listed above or you require a different matrix, size orconcentration, our experienced chemists will provide you with a custom quotation.

Page 18: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

12 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

These products do not require Hazardous Shipping charges at this time

Water Matrix Unit Cat. No. Price Cat. No. Price Cat. No. PriceAcetate 100 mL IC-ACET-1X-1 $ 15 ---------- -- IC-ACET-10X-1 $ 45

500 mL IC-ACET-1X-5 55 ---------- -- IC-ACET-10X-5 70Br (Bromate) NEW 100 mL ---------- -- ---------- -- IC-BROM-10X-1 45

500 mL ---------- -- ---------- -- IC-BROM-10X-5 70Br (Bromide) 100 mL IC-BR-1X-1 15 IC-BR-2X-1 $ 25 IC-BR-10X-1 45

500 mL IC-BR-1X-5 55 IC-BR-2X-5 60 IC-BR-10X-5 70Chlorate 100 mL IC-CHLR-1X-1 15 ---------- -- IC-CHLR-10X-1 45

500 mL IC-CHLR-1X-5 55 ---------- -- IC-CHLR-10X-5 70Citrate NEW 100 mL ---------- -- ---------- -- IC-CITR-10X-1 45Cl (Chloride) 100 mL IC-Cl-1X-1 15 IC-Cl-2X-1 25 IC-Cl-10X-1 45

500 mL IC-Cl-1X-5 55 IC-Cl-2X-5 60 IC-Cl-10X-5 70ClO2 (Chlorite) NEW 100 mL IC-CHLT-1X-1 15 ---------- -- IC-CHLT-10X-1 45

500 mL IC-CHLT-1X-5 55 ---------- -- IC-CHLT-10X-5 70Chromate 100 mL IC-CHRM-1X-1 15 ---------- -- IC-CHRM-10X-1 45

500 mL IC-CHRM-1X-5 55 ---------- -- IC-CHRM-10X-5 70F (Fluoride) 100 mL IC-F-1X-1 15 IC-F-2X-1 25 IC-F-10X-1 45

500 mL IC-F-1X-5 55 IC-F-2X-5 60 IC-F-10X-5 70Formate 100 mL IC-FORM-1X-1 15 ---------- -- IC-FORM-10X-1 45

500 mL IC-FORM-1X-5 55 ---------- -- IC-FORM-10X-5 70Glycolate NEW 100 mL ---------- -- ---------- -- IC-GLYC-10X-1 45Iodide 100 mL ---------- -- ---------- -- IC-I-10X-1 45Lactate NEW 100 mL ---------- -- ---------- -- IC-LACT-10X-1 45Malate NEW 100 mL ---------- -- ---------- -- IC-MALA-10X-1 45Maleate NEW 100 mL ---------- -- ---------- -- IC-MALE-10X-1 45NO2 (Nitrite) 100 mL IC-NO2-1X-1 15 IC-NO2-2X-1 25 IC-NO2-10X-1 45

500 mL IC-NO2-1X-5 55 IC-NO2-2X-5 60 IC-NO2-10X-5 70NO3 (Nitrate) 100 mL IC-NO3-1X-1 15 IC-NO3-2X-1 25 IC-NO3-10X-1 45

500 mL IC-NO3-1X-5 55 IC-NO3-2X-5 60 IC-NO3-10X-5 70Oxalate 100 mL IC-OXAL-1X-1 15 ---------- -- IC-OXAL-10X-1 45

500 mL IC-OXAL-1X-5 55 ---------- -- IC-OXAL-10X-5 70Perchlorate NEW 100 mL ---------- -- ---------- -- IC-PER-10X-1 45Phthalate NEW 100 mL ---------- -- ---------- -- IC-PHTH-10X-1 45PO4 (Phosphate) 100 mL IC-PO4-1X-1 15 IC-PO4-2X-1 25 IC-PO4-10X-1 45

500 mL IC-PO4-1X-5 55 IC-PO4-2X-5 60 IC-PO4-10X-5 70Propionate NEW 100 mL ---------- -- ---------- -- IC-PROP-10X-1 45Succinate NEW 100 mL ---------- -- ---------- -- IC-SUCC-10X-1 45SO4 (Sulfate) 100 mL IC-SO4-1X-1 15 IC-SO4-2X-1 25 IC-SO4-10X-1 45

500 mL IC-SO4-1X-5 55 IC-SO4-2X-5 60 IC-SO4-10X-5 70Tartrate NEW 100 mL ---------- -- ---------- -- IC-TART-10X-1 45

Anion Singles 100 µg/mL 200 µg/mL 1,000 µg/mL

IC

IonChrom

atography

Ion Chromatography

99.99% High Purity Starting Materials18 Megohm, ASTM type I WaterPackaged in pre-cleaned high quality HDPE bottles.Each Standard is Supplied with a Certificate of Analysis, stating traceability to NIST, certified value and expiration date.

Final Solution is filtered through a 0.2 µm filter to eliminate contaminants (such as suspended solids and microbes). This extends shelf life and protects your column.Ready-To-Use Mixes and Calibration Sets.Standards may be used for other “Classical or Wet” methods.

Anion Kits

IC-AN-1X-1-SET $ 75 / 7 x 100 mLEach at 100 µg/mL in Water

IC-F-1X-1 FluorideIC-Cl-1X-1 ChlorideIC-NO2-1X-1 NitriteIC-NO3-1X-1 NitrateIC-BR-1X-1 BromideIC-PO4-1X-1 PhosphateIC-SO4-1X-1 Sulfate

IC-AN-2X-1-SET $ 130 / 7 x 100 mLEach at 200 µg/mL in Water

IC-F-2X-1 FluorideIC-Cl-2X-1 ChlorideIC-NO2-2X-1 NitriteIC-NO3-2X-1 NitrateIC-BR-2X-1 BromideIC-PO4-2X-1 PhosphateIC-SO4-2X-1 Sulfate

IC-AN-10X-1-SET $ 235 / 7 x 100 mLEach at 1000 µg/mL in Water

IC-F-10X-1 FluorideIC-Cl-10X-1 ChlorideIC-NO2-10X-1 NitriteIC-NO3-10X-1 NitrateIC-BR-10X-1 BromideIC-PO4-10X-1 PhosphateIC-SO4-10X-1 Sulfate

IC-AN-1X-5-SET $ 285 / 7 x 500 mLEach at 100 µg/mL in Water

IC-F-1X-5 FluorideIC-Cl-1X-5 ChlorideIC-NO2-1X-5 NitriteIC-NO3-1X-5 NitrateIC-BR-1X-5 BromideIC-PO4-1X-5 PhosphateIC-SO4-1X-5 Sulfate

IC-AN-2X-5-SET $ 315 / 7 x 500 mLEach at 200 µg/mL in Water

IC-F-2X-5 FluorideIC-Cl-2X-5 ChlorideIC-NO2-2X-5 NitriteIC-NO3-2X-5 NitrateIC-BR-2X-5 BromideIC-PO4-2X-5 PhosphateIC-SO4-2X-5 Sulfate

IC-AN-10X-5-SET $ 365 / 7 x 500 mLEach at 1000 µg/mL in Water

IC-F-10X-5 FluorideIC-Cl-10X-5 ChlorideIC-NO2-10X-5 NitriteIC-NO3-10X-5 NitrateIC-BR-10X-5 BromideIC-PO4-10X-5 PhosphateIC-SO4-10X-5 Sulfate

Organic Acid Salt Standards

Technical NoteRecommended productfor EPA Method 300.0“Determination ofInorganic Anions by IC”and ASTM D-4327-91,“Test Method for Anionsin Water by ChemicallySuppressed IC.” See IC-MAN-14-R2-1 onpage 14

Page 19: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 13

Ion Chromatography IC

See Next page for Additional Ion Chrom Anion Mixtures

IonChrom

atography

Unit 100 µg/mL Price 1000 µg/mL PriceNO2-N (Nitrite-Nitrogen) 100 mL IC-NO2-N-1X-1 $ 15 IC-NO2-N-10X-1 $ 45Water Matrix 500 mL IC-NO2-N-1X-5 55 IC-NO2-N-10X-5 70NO3-N (Nitrate-Nitrogen) 100 mL IC-NO3-N-1X-1 15 IC-NO3-N-10X-1 45Water Matrix 500 mL IC-NO3-N-1X-5 55 IC-NO3-N-10X-5 70PO4-P (Phosphate-Phosphorous) 100 mL IC-PO4-P-1X-1 15 IC-PO4-P-10X-1 45Water Matrix 500 mL IC-PO4-P-1X-5 55 IC-PO4-P-10X-5 70SO4-S (Sulfate-Sulfur) 100 mL IC-SO4-S-1X-1 15 IC-SO4-S-10X-1 45Water Matrix 500 mL IC-SO4-S-1X-5 55 IC-SO4-S-10X-5 70NH4-N (Ammonium-Nitrogen) 100 mL IC-NH4-N-1X-1 15 IC-NH4-N-10X-1 45Water Matrix 500 mL IC-NH4-N-1X-5 55 IC-NH4-N-10X-5 70

Anion Singles as the Element

Anion Single as the Element KitsIC-AN-R-10X-1-SET $ 235 / 7 x 100 mLEach at 1000 µg/mL

IC-F-10X-1 FluorideIC-Cl-10X-1 ChlorideIC-NO2-N-10X-1 Nitrite-NitrogenIC-NO3-N-10X-1 Nitrate-NitrogenIC-BR-10X-1 BromideIC-PO4-P-10X-1 Phosphate-PhosphorousIC-SO4-S-10X-1 Sulfate-Sulfur

IC-AN-R-10X-5-SET $ 365 / 7 x 500 mLEach at 1000 µg/mL

IC-F-10X-5 FluorideIC-Cl-10X-5 ChlorideIC-NO2-N-10X-5 Nitrite-NitrogenIC-NO3-N-10X-5 Nitrate-NitrogenIC-BR-10X-5 BromideIC-PO4-P-10X-5 Phosphate-PhosphorousIC-SO4-S-10X-5 Sulfate-Sulfur

These products do not require Hazardous Shipping charges atthis time

Anion Mix #2IC-MAN-02-1 $ 115 / 100 mLWater Matrix 6 comps.

F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 400 µg/mLNO3 (Nitrate) 400 µg/mLPO4 (Phosphate) 600 µg/mLSO4 (Sulfate) 400 µg/mL

Anion Mix #3IC-MAN-03-1 $ 75 / 100 mLWater Matrix 3 comps.

F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLSO4 (Sulfate) 100 µg/mL

Anion Mix #4IC-MAN-04-1 $ 115 / 100 mLWater Matrix 6 comps.

F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLBr (Bromide) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mLSO4 (Sulfate) 100 µg/mL

Anion Mix #5IC-MAN-05-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 5 µg/mLSO4 (Sulfate) 30 µg/mL

Anion Mix #6IC-MAN-06-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 1 µg/mLCl (Chloride) 5 µg/mLBr (Bromide) 5 µg/mLNO3 (Nitrate) 5 µg/mLPO4 (Phosphate) 5 µg/mLSO4 (Sulfate) 10 µg/mL

Anion Mix #7IC-MAN-07-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 1 µg/mLCl (Chloride) 10 µg/mLBr (Bromide) 10 µg/mLNO3 (Nitrate) 10 µg/mLPO4 (Phosphate) 10 µg/mLSO4 (Sulfate) 10 µg/mL

Anion Mix #8IC-MAN-08-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 10 µg/mLCl (Chloride) 20 µg/mLBr (Bromide) 20 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 20 µg/mLSO4 (Sulfate) 20 µg/mL

Anion Mix #9IC-MAN-09-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 20 µg/mLCl (Chloride) 40 µg/mLBr (Bromide) 40 µg/mLNO3 (Nitrate) 40 µg/mLPO4 (Phosphate) 40 µg/mLSO4 (Sulfate) 40 µg/mL

Anion Mix #10IC-MAN-10-R1-1 $ 85 / 100 mLWater Matrix 6 comps.

F (Fluoride) 25 µg/mLCl (Chloride) 50 µg/mLBr (Bromide) 50 µg/mLNO3 (Nitrate) 50 µg/mLPO4 (Phosphate) 50 µg/mLSO4 (Sulfate) 50 µg/mL

Anion Mix #1IC-MAN-01-1 $ 100 / 100 mLWater Matrix 5 comps.

F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL

Technical NoteTo enhance the shelf lifeand long term stability ofour IC products, Nitrite hasbeen split out of mixes thatcontain Nitrate.

Anion Mixes

CLP-BLW-5 (500 mL)IC-MAN-07-R1-1 (100 mL)IC-MAN-08-R1-1 (100 mL)IC-MAN-09-R1-1 (100 mL)IC-MAN-10-R1-1 (100 mL)

Technical NoteThis Ready-to-Use set ofstandards can be used togenerate a 5 pointcalibration curve (includingblank).

IC-MAN-CAL-SET $ 395/5 unitsContains one each of:

Technical NoteWe offer several Nitriteconcentrations that can beadded just prior to analysisfor maximum stability.

Page 20: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

14 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

Anion Mix #11IC-MAN-11-1 $ 175 / 100 mLWater Matrix 5 comps.

Cl (Chloride) 1000 µg/mLBr (Bromide) 1000 µg/mLNO3 (Nitrate) 1000 µg/mLPO4 (Phosphate) 1000 µg/mLSO4 (Sulfate) 1000 µg/mL

Anion Mix #12IC-MAN-12-1 $ 100 / 100 mLWater Matrix 5 comps.

Cl (Chloride) 15 µg/mLBr (Bromide) 15 µg/mLNO3 (Nitrate) 15 µg/mLPO4 (Phosphate) 15 µg/mLSO4 (Sulfate) 15 µg/mL

Anion Mix #13IC-MAN-13-1 $ 75 / 100 mLWater Matrix 3 comps.

F (Fluoride) 25 µg/mLCl (Chloride) 50 µg/mLSO4 (Sulfate) 100 µg/mL

Anion Mix #14IC-MAN-14-R3-1 $ 100 / 100 mLWater Matrix 6 comps.

F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLNO3 (Nitrate) 100 µg/mLBr (Bromide) 100 µg/mLPO4 (Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL

Anion Mix #15IC-MAN-15-R2-1 $ 70 / 100 mLWater Matrix 3 comps.

F (Fluoride) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mL

Anion Mix #16IC-MAN-16-R1-1 $ 100 / 100 mLWater Matrix 6 comps.

F (Fluoride) 100 µg/mLCl (Chloride) 200 µg/mLBr (Bromide) 100 µg/mLNO3 (Nitrate) 20 µg/mLPO4 (Phosphate) 30 µg/mLSO4 (Sulfate) 20 µg/mL

Anion Mix #17IC-MAN-17-R1-1 $ 85 / 100 mLWater Matrix 5 comps.

Cl (Chloride) 20 µg/mLBr (Bromide) 12 µg/mLNO3 (Nitrate) 12 µg/mLPO4 (Phosphate) 12 µg/mLSO4 (Sulfate) 80 µg/mL

Anion Mix #18IC-MAN-18-R1-1 $ 85 / 100 mLWater Matrix 5 comps.

F (Fluoride) 100 µg/mLCl (Chloride) 100 µg/mLNO3 (Nitrate) 100 µg/mLPO4 (Phosphate) 100 µg/mLSO4 (Sulfate) 100 µg/mL

IC-MAN-14-R2 plus IC-NO2-N-1Xis perfect for EPA Method 300.1

Anion Mix #14 RevisedIC-MAN-14-R2-1 $ 100 / 100 mLWater Matrix 6 comps.

F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLBr (Bromide) 100 µg/mLNO3-N (Nitrate-Nitrogen) 100 µg/mLPO4-P (Phosphate-Phosphorus)150 µg/mLSO4 (Sulfate) 150 µg/mL

Easy to use, ready to dilute concentrates. Open a fresh bottle and dilute the volume (50 mL to5 L or 100 mL to 10 L) and be assured of a fresh uncontaminated mobile phase.

0.5 M Sodium bicarbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 180 5 x 100 mL $ 240(100X concentrate) IC-ELU-01-0.5 IC-ELU-01-1 IC-ELU-01-0.5-PAK IC-ELU-01-1-PAK0.5 M Sodium carbonate 50 mL $ 45 100 mL $ 60 5 x 50 mL $ 180 5 x 100 mL $ 240(100X concentrate) IC-ELU-02-0.5 IC-ELU-02-1 IC-ELU-02-0.5-PAK IC-ELU-02-1-PAK0.18 M Sodium carbonate/ 50 mL $ 25 100 mL $ 30 5 x 50 mL $ 100 5 x 100 mL $ 120

0.17 M Sodium bicarbonate IC-ELU-03-0.5 IC-ELU-03-1 IC-ELU-03-0.5-PAK IC-ELU-03-1-PAK(100X concentrate)

Ion Chrom Eluents

NitriteIC-NO2-10X-1 $ 45 / 100 mL

NO2 (Nitrite) 1000 µg/mLIC-NO2-1X-1 $ 15 / 100 mL

NO2 (Nitrite) 100 µg/mLIC-NO2-0.1X-1 $ 15 / 100 mL

NO2 (Nitrite) 10 µg/mLIC-NO2-N-1X-1 $ 15 / 100 mL

NO2 (Nitrite) 100 µg/mL

Ion ChromatographyIC

Anion Mixes (continued)

These products do not require Hazardous Shipping charges at this time

DichloroacetateSurrogate StandardM-300.1-SS $ 125 / 100 mL0.5 mg/mL Dichloroacetate in Water

NEW

IonChrom

atography

Method 314.0 Perchlorate in Drinking Water by IC

Perchlorate StandardIC-PER-10X-1 $ 45 / 100 mL1000 µg/mL in Water

Perchlorate

Mixed Common AnionStockM-314.0-MCA-250X-1

$ 150 / 100 mL25 mg/mL in Water 3 comps.

ChlorideSulfateCarbonate

Conductivity MeterCalibration StandardM-314.0-CMCS-1 $ 35 / 100 mL1410 µs/cm @ 25˚C in Water

Method 314.0Perchlorate CalibrationSetM-314.0-SET $ 205 / 3 x 100 mL

IC-PER-10X-1M-314.0-MCA-250X-1M-314.0-CMCS-1

Perchlorate has become an analyte of environmental interest sincebeing detected in a number of drinking and groundwater supplieslocated in Midwestern states. EPA method 314.0 was released as anapproved method to achieve the required sensitivity.

Page 21: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 15

Ion Chromatography ICIon

Chromatography

Cation Mix #2IC-MCA-02-1 $ 125 / 100 mLDilute HNO3 6 comps.

Ca (Calcium) 100 µg/mLNH4 (Ammonium) 100 µg/mLMg (Magnesium) 100 µg/mLK (Potassium) 100 µg/mLNa (Sodium) 100 µg/mLLi (Lithium) 100 µg/mL

Cation Mix #3IC-MCA-03-1 $ 100 / 100 mLDilute HNO3 4 comps.

Ca (Calcium) 100 µg/mLNH4 (Ammonium) 100 µg/mLNa (Sodium) 50 µg/mLLi (Lithium) 10 µg/mL

Cation Mix #4IC-MCA-04-1 $ 100 / 100 mLDilute HNO3 4 comps.

Ca (Calcium) 400 µg/mLMg (Magnesium) 200 µg/mLBa (Barium) 1600 µg/mLSr (Strontium) 600 µg/mL

Cation Mix #5IC-MCA-05-1 $ 100 / 100 mLDilute HNO3 4 comps.

NH4 (Ammonium) 3 µg/mLK (Potassium) 6 µg/mLNa (Sodium) 3 µg/mLLi (Lithium) 0.5 µg/mL

Cation Mix #6IC-MCA-06-1 $ 100 / 100 mLDilute HNO3 6 comps.

Ca (Calcium) 2 µg/mLNH4 (Ammonium) 1.5 µg/mLMg (Magnesium) 2 µg/mLK (Potassium) 2.5 µg/mLNa (Sodium) 1.5 µg/mLLi (Lithium) 0.2 µg/mL

Cation Mix #1IC-MCA-01-1 $ 150 / 100 mLDilute HNO3 6 comps.

Ca (Calcium) 1000 µg/mLNH4 (Ammonium) 400 µg/mLMg (Magnesium) 200 µg/mLK (Potassium) 200 µg/mLNa (Sodium) 200 µg/mLLi (Lithium) 50 µg/mL

Cation Mixes

Cation Singles 100 µg/mL 200 µg/mL 1,000 µg/mL

Dilute HNO3 Matrix Unit Cat. No. Price Cat. No. Price Cat. No. PriceNH4 (Ammonium) 100 mL IC-NH4-1X-1 $ 15 IC-NH4-2X-1 $ 25 IC-NH4-10X-1 † $ 45

500 mL IC-NH4-1X-5 55 IC-NH4-2X-5 60 IC-NH4-10X-5 † 70Ba (Barium) 100 mL IC-BA-1X-1 15 IC-BA-2X-1 25 IC-BA-10X-1 45

500 mL IC-BA-1X-5 55 IC-BA-2X-5 60 IC-BA-10X-5 70Ca (Calcium) 100 mL IC-CA-1X-1 15 IC-CA-2X-1 25 IC-CA-10X-1 45

500 mL IC-CA-1X-5 55 IC-CA-2X-5 60 IC-CA-10X-5 70Li (Lithium) 100 mL IC-LI-1X-1 15 IC-LI-2X-1 25 IC-LI-10X-1 45

500 mL IC-LI-1X-5 55 IC-LI-2X-5 60 IC-LI-10X-5 70Mg (Magnesium) 100 mL IC-MG-1X-1 15 IC-MG-2X-1 25 IC-MG-10X-1 45

500 mL IC-MG-1X-5 55 IC-MG-2X-5 60 IC-MG-10X-5 70K (Potassium) 100 mL IC-K-1X-1 15 IC-K-2X-1 25 IC-K-10X-1 45

500 mL IC-K-1X-5 55 IC-K-2X-5 60 IC-K-10X-5 70Na (Sodium) 100 mL IC-NA-1X-1 15 IC-NA-2X-1 25 IC-NA-10X-1 45

500 mL IC-NA-1X-5 55 IC-NA-2X-5 60 IC-NA-10X-5 70Sr (Strontium) 100 mL IC-SR-1X-1 15 IC-SR-2X-1 25 IC-SR-10X-1 45

500 mL IC-SR-1X-5 55 IC-SR-2X-5 60 IC-SR-10X-5 70

† 1,000 µg/mL as Ammonium(NH4) Other Nitrogen speciesequivalents are:

NH3 (Ammonia) = 944 µg/mLN (Nitrogen) = 776 µg/mL

Cation Kits

IC-CAT-1X-1-SET $ 75 / 8 x 100 mLEach at 100 µg/mL in Dilute HNO3

IC-CA-1X-1 CalciumIC-NH4-1X-1 AmmoniumIC-MG-1X-1 MagnesiumIC-K-1X-1 PotassiumIC-NA-1X-1 SodiumIC-LI-1X-1 LithiumIC-BA-1X-1 BariumIC-SR-1X-1 Strontium

IC-CAT-2X-1-SET $ 130 / 8 x 100 mLEach at 200 µg/mL in Dilute HNO3

IC-CA-2X-1 CalciumIC-NH4-2X-1 AmmoniumIC-MG-2X-1 MagnesiumIC-K-2X-1 PotassiumIC-NA-2X-1 SodiumIC-LI-2X-1 LithiumIC-BA-2X-1 BariumIC-SR-2X-1 Strontium

IC-CAT-10X-1-SET $ 235 / 8 x 100 mLEach at 1000 µg/mL in Dilute HNO3

IC-CA-10X-1 CalciumIC-NH4-10X-1 AmmoniumIC-MG-10X-1 MagnesiumIC-K-10X-1 PotassiumIC-NA-10X-1 SodiumIC-LI-10X-1 LithiumIC-BA-10X-1 BariumIC-SR-10X-1 Strontium

IC-CAT-1X-5-SET $ 285 / 8 x 500 mLEach at 100 µg/mL in Dilute HNO3

IC-CA-1X-5 CalciumIC-NH4-1X-5 AmmoniumIC-MG-1X-5 MagnesiumIC-K-1X-5 PotassiumIC-NA-1X-5 SodiumIC-LI-1X-5 LithiumIC-BA-1X-5 BariumIC-SR-1X-5 Strontium

IC-CAT-2X-5-SET $ 315 / 8 x 500 mLEach at 200 µg/mL in Dilute HNO3

IC-CA-2X-5 CalciumIC-NH4-2X-5 AmmoniumIC-MG-2X-5 MagnesiumIC-K-2X-5 PotassiumIC-NA-2X-5 SodiumIC-LI-2X-5 LithiumIC-BA-2X-5 BariumIC-SR-2X-5 Strontium

IC-CAT-10X-5-SET $ 365 / 8 x 500 mLEach at 1000 µg/mL in Dilute HNO3

IC-CA-10X-5 CalciumIC-NH4-10X-5 AmmoniumIC-MG-10X-5 MagnesiumIC-K-10X-5 PotassiumIC-NA-10X-5 SodiumIC-LI-10X-5 LithiumIC-BA-10X-5 BariumIC-SR-10X-5 Strontium

Page 22: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Wet Chemicals

16 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

Physical & Aggregate Standard EPA Wet Chemical LineProperties Method Method Cat. No.Turbidity 2130 180 WC-TURB-4X-1Alkalinity 2320 310 WC-ALK-10X-1Hardness 2340 130 WC-HARD-10X-1Conductivity 2510 120 WC-COND-10X-1Solids 2540 160 WC-SOL

Inorganic NonmetallicConstituentsBromide 4500-Br- 320 IC-BR-10X-1Ion Chromatography 4110 300 IC-MAN-14-R3-1Cyanide 4500-CN- 335 WC-CN-10X-1 ∆Chlorine 4500-Cl 330 WC-TRC-10X-10MLChloride 4500-Cl- 325 IC-CL-10X-1Fluoride 4500-F- 340 IC-F-10X-1pH Value 4500-H+ 150 WC-PH-4-1Iodide 4500-I- 345 IC-I-10X-1Nitrogen (Ammonia) 4500-NH3 350 IC-NH4-N-10X-1Nitrogen (Nitrite) 4500-NO2

- 353 IC-NO2-N-10X-1Nitrogen (Nitrate) 4500-NO3

- 352 IC-NO3-N-10X-1Nitrogen (Organic) 4500-Norg 351 WC-TON-10X-1Phosphorus 4500-P 365 IC-PO4-P-10X-1Silica 4500-SiO2 370 WC-SIO2-10X-1Sulfate 4500-SO4 375 IC-SO4-10X-1

Aggregate OrganicConstituentsBiochemical Oxygen 5210 405 WC-BOD-10MLDemand (BOD)Chemical Oxygen 5220 410 WC-COD-5X-10MLDemand (COD)Total Organic 5310 415 WC-TOC-10X-1Carbon (TOC)Oil and Grease 5520 413 WC-OILG-10X-1 ∆Phenols 5530 420 WC-PHEN-10X-1

Our Wet Chemical Line offers Inorganic Chemists the certified standards they need. All of our Wet Chemical standards are subjected to the samerigorous quality control procedures as our ICP and IC standards.

Each Standard is prepared from the highest quality raw material, according to ASTM, EPA or “Standard Methods”1 procedures. All the balancesused in the preparation are calibrated regularly with NIST traceable weights.

Each batch of finished standards is then analyzed to verify concentration, with NIST standards where possible. Finally, each batch is packaged forthe maximum stability and shelf life so that you receive the best possible product.

1 Standard Methods for the Examination of Water and Wastewater. American Public Health Association, American Water Works Association, Water Environment Federation

Recommended Calibration Standard Reference Chart

∆ These products require a Hazardous Shipping Charge

WetChem

icals

e-Standards™

Just a click away

AccuStandard.comThis is the easier way to get

Chemical Reference Standards

Page 23: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 17

WetChem

icals

ChlorideIC-CL-10X-1 $ 45 / 100 mL1000 µg/mL Chloride in Water

Many of these methods use classical wet chemical methods to determine the components of either potable or wastewater.

These Standards are concerned primarily with measuring actual physical characteristics of a sample as opposed to the chemical characteristics.These analytes are measured frequently in both drinking and waste waters.

ConductivityWC-COND-10X-1 $ 25 / 100 mL1000 µmhos in water

HardnessWC-HARD-10X-1 $ 45 / 100 mL1000 µg/mL equivalent CaCO3

A combination of Ca and Mg to give anapproximate concentration of 1000 µg/mL CaCO3.Hardness µg/mL equivalent CaCO3 = 2.497 [Caµg/mL] + 4.118 [Mg µg/mL]

AlkalinityWC-ALK-10X-1 $ 25 / 100 mL1000 µg/mL CaCO3 equivalent to pH 4.5

TurbidityWC-TURB-4X-1 $ 45 / 100 mL400 NTU non-ratio Turbidity StandardA stable solution of microspheres in an aqueousmatrix. Can be diluted in turbidity free water tomake a calibration curve.Do not shake prior to use.

SolidsWC-SOL $ 25 / sample

2 comps.1000 ppm TSS (Total Suspended Solids) and1000 ppm TDS (Total Disolved Solids) for a 2000ppm TS (Total Solids).

Dilute to 100 mL. Rinse vial and cap severaltimes to recover all solids.

SilicaWC-SIO2-10X-1 $ 45 / 100 mL1000 µg/mL as Silica (SiO2 ) in Water tr. HF

Phosphorus - TotalIC-PO4-P-10X-1 $ 45 / 100 mL1000 µg/mL Phosphorus in Water

Nitrogen - Total OrganicWC-TON-10X-1 $ 45 / 100 mL1000 µg/mL Total Organic Nitrogen in Water

Nitrogen - NitrateIC-NO3-N-10X-1 $ 45 / 100 mL1000 µg/mL Nitrate in Water

Nitrogen - NitriteIC-NO2-N-10X-1 $ 45 / 100 mL1000 µg/mL Nitrite in Water

Nitrogen - AmmoniaIC-NH4-N-10X-1 $ 45 / 100 mL1000 µg/mL Ammonium in Water

SulfateIC-SO4-10X-1 $ 45 / 100 mL1000 µg/mL SO4 in Water

IodideIC-I-10X-1 $ 45 / 100 mL1000 µg/mL Iodide in Water

FluorideIC-F-10X-1 $ 45 / 100 mL1000 µg/mL Fluoride in Water

Total Residual ChlorineWC-TRC-10X-10ML $ 35 / 10 mL1000 µg/mL Chlorine in Water

CyanideWC-CN-10X-1 ∆ $ 45 / 100 mL1000 µg/mL Cyanide in Water tr. NaOH

Method 300.1 Ion ChromStandard RevisedIC-MAN-14-R2-1 $ 115 / 100 mLAt stated conc. in Water 6 comps.

F (Fluoride) 20 µg/mLCl (Chloride) 30 µg/mLBr (Bromide) 100 µg/mLN-NO3 (Nitrogen-Nitrate) 100 µg/mLP-PO4 (Phosphorus-Phosphate) 150 µg/mLSO4 (Sulfate) 150 µg/mL

BromideIC-BR-10X-1 $ 45 / 100 mL1000 µg/mL Bromide in Water

pHWC-PH-4-1 $ 25 / 100 mLpH of 4.0 in Water

Technical NoteNitrogen Species are all calculated backto the Nitrogen - not to the Anion orCation species.Technical Note

This product is shipped in an amberflame sealed ampule for maximumstability.

Technical NoteThis product was designed to moreclosely meet the EPA standard by havingthe concentrations for the nutrientscalculated back to the element ratherthan to the anion.

Technical NoteCan also be used for ortho-phosphateanalysis.

Inorganic Nonmetallic Constituents

Physical & Aggregate Properties

Dichloroacetate SurrogateStandardM-300.1-SS $ 125 / 100 mL0.5 mg/mL Dichloroacetate in Water

NEWTotal Kjedahl NitrogenWC-TKN-10X-1 $ 45 / 100 mL1000 µg/mL TKN in Water

Wet Chemicals

Page 24: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

18 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

Alkalinity 1000 µg/mL Water WC-ALK-10X-1 100 mL $ 25Ammonium 100 µg/mL Water IC-NH4-1X-1 100 mL 15

200 µg/mL Water IC-NH4-2X-1 100 mL 251000 µg/mL Water IC-NH4-10X-1 100 mL 45

Ammonium as Nitrogen 100 µg/mL Water IC-NH4-N-1X-1 100 mL 151000 µg/mL Water IC-NH4-N-10X-1 100 mL 45

Biological Oxygen Demand (BOD) 100 µg/mL Water WC-BOD-10ML 10 mL 25Bromate 1000 µg/mL Water IC-BROM-10X-1 100 mL 45Bromide 100 µg/mL Water IC-BR-1X-1 100 mL 15

200 µg/mL Water IC-BR-2X-1 100 mL 251000 µg/mL Water IC-BR-10X-1 100 mL 45

Chemical Oxygen Demand (COD) 500 µg/mL Water WC-COD-5X-10ML 10 mL 25Chloride 100 µg/mL Water IC-CL-1X-1 100 mL 15

200 µg/mL Water IC-CL-2X-1 100 mL 251000 µg/mL Water IC-CL-10X-1 100 mL 45

Chlorite NEW 1000 µg/mL Water IC-CHLT-10X-1 100 mL 45Conductivity 1000 µg/mL Water WC-COND-10X-1 100 mL 25Cyanide 100 µg/mL Sodium Hydroxide:Water WC-CN-1X-1 ∆ 100 mL 15

1000 µg/mL Sodium Hydroxide:Water WC-CN-10X-1 ∆ 100 mL 45Hardness 1000 µg/mL Water WC-HARD-10X-1 100 mL 45Hexavalent Chromium (Cr6+) 1000 µg/mL Water WC-HEX-10X-1 100 mL 45Methylene Blue Activated Substance (MBAS) 1000 µg/mL Water WC-MBAS-10X-1 100 mL 35Nitrite 100 µg/mL Water IC-NO2-1X-1 100 mL 15

200 µg/mL Water IC-NO2-2X-1 100 mL 251000 µg/mL Water IC-NO2-10X-1 100 mL 45

Nitrite as Nitrogen 100 µg/mL Water IC-NO2-N-1X-1 100 mL 151000 µg/mL Water IC-NO2-N-10X-1 100 mL 45

Oil and Grease (Total Oil & Grease) 1000 µg/mL n-Propanol WC-OILG-10X-1 ∆ 100 mL 45Perchlorate 1000 µg/mL Water IC-PER-10X-1 100 mL 55pH 4 pH units Water WC-PH-4-1 100 mL 25Phenol 1000 µg/mL Water WC-PHEN-10X-1 100 mL 45Silicon dioxide 1000 µg/mL Water tr. HF WC-SIO2-10X-1 100 mL 45Solids 2000 µg/mL WC-SOL 1 unit 25Total Organic Carbon (TOC) 1000 µg/mL Water WC-TOC-10X-1 100 mL 25Total Organic Halides (TOX) 1000 µg/mL MeOH WC-TOX-10X 1 mL 25

1000 µg/mL MeOH WC-TOX-10X-PAK 5 x 1 mL 100Total Kjeldahl Nitrogen (TKN) NEW 1000 µg/mL Water WC-TKN-10X-1 100 mL 45Total Organic Nitrogen (TON) 1000 µg/mL Water WC-TON-10X-1 100 mL 45Total Residual Chlorine (TRC) 1000 µg/mL Water WC-TRC-10X-10ML 10 mL 35Turbidity - Non-Ratio 400 NTU Water WC-TURB-4X-1 100 mL 45

WET CHEMICALS QTY./CONC. MATRIX CAT. NO. UNIT PRICE

Wet Chemicals

Rather than determining individual organic analytes, these Standards are used to determine organic matter in broad categories, based primarily on how theyreact.

Biochemical Oxygen Demand(BOD)WC-BOD-10ML $ 25 / 10 mL100 µg/mL BOD

75 mg/L glucose and 75 mg/L glutamic acidprovided in a flame sealed ampule. Dilute to 1Limmediately before use.

Chemical Oxygen Demand (COD)WC-COD-5X-10ML $ 25 / 10 mL500 µg/mL COD in water

Total Organic Carbon (TOC)WC-TOC-10X-1 $ 25 / 100 mL1000 µg/mL TOC

ConductivityWC-COND-10X-1 $ 25 / 100 mL1000 µmhos in water

Oil and GreaseWC-OILG-10X-1 ∆ $ 45 / 100 mL1000 µg/mL Total Oil and Grease in n-Propanol

Contains 500 µg/mL vegetable oil and 500 µg/mLof petroleum oil. Shake well before use.

PhenolsWC-PHEN-10X-1 $ 45 / 100 mL1000 µg/mL Phenol in water.

Aggregate Organic

∆ These products require a Hazardous Shipping Charge

WetChem

icals

Page 25: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 19

TPH,OilandGrease

Precision and Recovery (PAR) Spiking SolutionM-1664-5ML $ 15 / 1 x 5 mLM-1664-5ML-PAK SAVE 20% $ 60 / 5 x 5 mL4.0 mg/mL each in Acetone 2 comps.M-1664-20ML $ 25 / 1 x 20 mLM-1664-20ML-PAK SAVE 20% $ 100 / 5 x 20 mL4.0 mg/mL each in Acetone 2 comps.

Hexadecane Stearic acid

Oil, Grease and Petroleum Hydrocarbon Total Recoverable (IR Method)M-418 $ 30 / 1 x 1 mLM-418-PAK SAVE 20% $ 120 / 5 x 1 mLTotal 4.15 mg/mL in Freon 113, (Parts by volume) 3 comps.

Oil, Grease & Petroleum Hydrocarbon Concentrates MixM-418-CON $ 35 / 1 x 1 mL% by volume 3 comps.

Chlorobenzene (25.0)Isooctane (37.5)

Hexadecane (37.5)Chlorobenzene (10.0)n-Hexadecane (15.0)

Isooctane (15.0)

AccuStandard offers the widest selection of Petroleum standards. These TPH oil analysis standards are a sample of the hundreds in our OrganicCatalog.

Technical NotePrecison and Recovery (PAR) Spiking Solution was developed for thenew Method 1664. This performance based method was developed toreplace previous gravimetric procedures incorporating Freon-113 as theextraction solvent for the determination of Oil and Grease and TotalPetroleum Hydrocarbons. Each standard is packaged in a flame sealedampule conveniently sized for quality control of the analytical batch.

Total Recoverable Petroleum Hydrocarbon MixM-8440 $ 20 / 1 x 1 mLM-8440-PAK SAVE 20% $ 80 / 5 x 1 mLAt stated conc. in Tetrachloroethene 3 comps.

Total Petroleum Hydrocarbon Concentrate MixM-8440-CON $ 30 / 1 x 1 mLM-8440-CON-PAK SAVE 20% $ 120 / 5 x 1 mL

3 comps.

Silica Gel Cleanup Calibration SolutionM-8440-SGC $ 10 / 1 x 1 mLM-8440-SGC-PAK SAVE 20% $ 40 / 5 x 1 mL10.0 mg/mL in Tetrachloroethene

Corn Oil

Chlorobenzene (0.10 w/w %)n-Hexadecane (0.15 w/w %)

Isooctane (0.15 w/w %) Chlorobenzene (25.0 vol %)n-Hexadecane (37.5 vol %)

Isooctane (37.5 vol %)

Method 1664 Oil, Grease & Total Petroleum Hydrocarbon (TPH)

Method 413.2 & 418.1 Total Petroleum Hydrocarbon Analysis by IR

Method 8440 Total Petroleum Hydrocarbon Analysis

TPH, Oil and Grease

Tens of thousands of Standards Ready-to-Ship

Page 26: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

20 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

QC Standard #3QCS-03-1 $ 135 / 100 mLQCS-03-5 $ 264 / 500 mL15 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 100 493.409Cd (Cadmium) 100 226.502Ca (Calcium) 100 315.887Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Mg (Magnesium) 100 279.079Mn (Manganese) 100 257.610Ni (Nickel) 100 231.604Na (Sodium) 100 588.995Ti (Titanium) 100 334.941Zn (Zinc) 100 213.856

QC Standard #2QCS-02-1 $ 89 / 100 mLQCS-02-5 $ 174 / 500 mL7 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 100 493.409B (Boron) 100 249.678K (Potassium) 1000 766.491Si (Silicon) † 500 251.611Ag (Silver) 50 328.068Na (Sodium) 100 588.995

† 1070 µg/mL as SiO2

QCS-1-SET $ 325 / 3 x 100 mL

Quality Control Standards Sets

QC Standard #1QCS-01-1 $ 182 / 100 mLQCS-01-5 $ 354 / 500 mL23 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Be (Beryllium) 100 313.042Cd (Cadmium) 100 226.502Ca (Calcium) 100 315.887Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Li (Lithium) 100 670.784Mg (Magnesium) 100 279.079Mn (Manganese) 100 257.610Mo (Molybdenum) 100 203.844Ni (Nickel) 100 231.604P (Phosphorus) 100 214.914Se (Selenium) 100 196.090Sr (Strontium) 100 421.552Tl (Thallium) 100 190.864Sn (Tin) 100 189.980Ti (Titanium) 100 334.941V (Vanadium) 100 292.402Zn (Zinc) 100 213.856

Quality Control Standards can be used for many different applications. AccuTrace QC Standards are ideal for calibration when performing NPDESmonitoring requirements and can be used for standard curve checks, inter-element correction methods, interference checks or any other uniqueapplication.

QCS-01-1

QC Standard #2RQCS-02-R1-1 $ 89 / 100 mLQCS-02-R1-5 $ 174 / 500 mL7 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 100 493.409B (Boron) 100 249.678K (Potassium) 100 766.491Si (Silicon) † 100 251.611Ag (Silver) 100 328.068Na (Sodium) 100 588.995

† 214 µg/mL as SiO2

QCS-01-5

QCS-5-SET $ 635 / 3 x 500 mL

ICPMulti-Element QC

Quality Control Standards

QCS-02-1 QCS-03-1

QCS-02-5 QCS-03-5

Multi-Elemental Standard IIQCS-05-1 $ 109 / 100 mL3 components in 2% HNO3

Element µg/mL λ (nm)Li (Lithium) 250 670.784K (Potassium) 10,000 766.491Na (Sodium) 1000 588.995

Multi-Elemental Standard IIIQCS-06-1 $ 109 / 100 mL4 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 1000 493.409Ca (Calcium) 1000 315.887Mg (Magnesium) 1000 279.079Sr (Strontium) 1000 421.552

Multi-Elemental Standard IQCS-04-1 $ 176 / 100 mL19 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 5 493.409Be (Beryllium) 1 313.042Bi (Bismuth) 200 223.061B (Boron) 15 249.678Cd (Cadmium) 20 266.502Cr (Chromium) 25 205.552Co (Cobalt) 20 228.616Cu (Copper) 20 324.754Ga (Gallium) 150 294.364In (Indium) 200 230.061Fe (Iron) 15 259.940Pb (Lead) 200 220.353Mn (Manganese) 5 257.610Ni (Nickel) 50 231.604Ag (Silver) 50 328.068Sr (Strontium) 1 421.552Tl (Thallium) 40 190.864Zn (Zinc) 20 213.856

Traceable to NIST Reference MaterialsFormulated from Ultra High PurityStarting Materials, Water and Acids

Meets EPA and Customer ApplicationsConcentration Verified by Wet Chemicaland Instrumental Analysis

ICPM

ulti-Element

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Packaged in Specially preparedAcid Leached BottlesFull Documentation

Page 27: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 21

ICPM

ulti-Element

Second Source QC Standard #1QCS-ASL-7-1 $ 85 / 1 x 100 mLQCS-ASL-7-5 $ 165 / 1 x 500 mL7 components in 2-5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 396.152Ba (Barium) 100 493.409B (Boron) 100 493.409K (Potassium) 1000 766.490Si (Silicon) 50 251.618Ag (Silver) 100 328.068Na (Sodium) 100 589.592

Element µg/mL λ (nm)Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Be (Beryllium) 100 313.042Cd (Cadmium) 100 226.502Ca (Calcium) 100 315.887Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Li (Lithium) 100 670.784

NIST Traceable Independent Lots Exact MatchThese Alternative Source Line Standards exactly match a formulation from another source you may be already using. Our ASL formulations saveyou the cost of a custom formulation by providing you with true independent lots.

Match Other Supplier’s Products.Use as a True Second Source.

Element µg/mL λ (nm)Mg (Magnesium) 100 279.079Mn (Manganese) 100 257.610Mo (Molybdenum) 100 203.844Ni (Nickel) 100 231.604Se (Selenium) 100 196.090Sr (Strontium) 100 421.552Tl (Thallium) 100 190.864Ti (Titanium) 100 334.941V (Vanadium) 100 292.402Zn (Zinc) 100 213.856

Second Source QC Standard #2QCS-ASL-21-1 $ 190 / 1 x 100 mLQCS-ASL-21-5 $ 370 / 1 x 500 mL21 components in 2-5% HNO3 tr. HF

Instrument Check Standard #6ICS-06-1 $ 86 / 100 mLICS-06-5 $ 168 / 500 mL9 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 50 396.152As (Arsenic) 50 189.042Cr (Chromium) 50 205.552Co (Cobalt) 50 228.616Cu (Copper) 50 324.754Pb (Lead) 50 220.353P (Phosphorus) 50 213.618K (Potassium) 50 766.490Na (Sodium) 50 589.592

Instrument Check Standard #7ICS-07-1 $ 90 / 100 mLICS-07-5 $ 175 / 500 mL7 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 50 396.152Ba (Barium) 50 233.527Cd (Cadmium) 50 214.438Cu (Copper) 50 324.754Mn (Manganese) 50 257.610K (Potassium) 500 766.490Zn (Zinc) 50 213.856

Instrument Check Standard #4ICS-04-1 $ 112 / 100 mLICS-04-5 $ 218 / 500 mL12 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 100 396.152As (Arsenic) 100 189.042Ba (Barium) 10 233.527Cu (Copper) 100 324.754Pb (Lead) 100 220.353Mn (Manganese) 100 257.610Ni (Nickel) 100 231.604P (Phosphorus) 100 213.618K (Potassium) 500 766.490Sc (Scandium) 100 361.384Na (Sodium) 100 589.592Zn (Zinc) 100 213.856Instrument Check Standard #2

ICS-02-1 $ 77 / 100 mLICS-02-5 $ 150 / 500 mL7 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 50 233.527Be (Beryllium) 20 313.042La (Lanthanum) 20 379.478Mn (Manganese) 20 257.610Ni (Nickel) 20 231.604Sc (Scandium) 20 361.384Zn (Zinc) 20 213.856

Instrument Check Standard #1ICS-01-1 $ 90 / 100 mLICS-01-5 $ 175 / 500 mL9 components in 2% HN03

Element µg/mL λ (nm)Al (Aluminum) 100 396.152Ba (Barium) 10 233.527Be (Beryllium) 10 313.042B (Boron) 100 249.773Ca (Calcium) 10 317.933Ni (Nickel) 100 231.604P (Phosphorus) 1000 213.618Sc (Scandium) 10 361.384Zn (Zinc) 100 213.856

Instrument Check Standard #3ICS-03-1 $ 104 / 100 mLICS-03-5 $ 202 / 500 mL11 components in 2% HNO3 tr. HF

Element µg/mL λ (nm)As (Arsenic) 20 189.042La (Lanthanum) 20 379.083Li (Lithium) 20 670.784Mn (Manganese) 20 257.610Mo (Molybdenum) 20 202.030Ni (Nickel) 20 231.604P (Phosphorus) 100 213.618K (Potassium) 100 766.490Sc (Scandium) 20 361.384Na (Sodium) 20 589.592S (Sulfur) 100 180.731

Instrument Check Standard #5ICS-05-1 $ 134 / 100 mLICS-05-5 $ 261 / 500 mL15 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 100 396.152As (Arsenic) 100 189.042Cd (Cadmium) 100 214.438Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Mg (Magnesium) 100 279.553Mn (Manganese) 100 257.610Ni (Nickel) 100 231.604K (Potassium) 100 766.490Na (Sodium) 100 589.592Y (Yttrium) 600 320.332Zn (Zinc) 100 213.856

These instrument check standards are used to verify ICP instrumentation performance over specific wavelength ranges from 160 nm to 790 nm.These standards are ideal for method development, technician training and other calibration uses.

ICPSecond Source QC & Instrument Check Standards

Second Source QC Standards

Instrument Check Standards

Page 28: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

22 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICPScreening Standards

Screening Standards

Semi-Quantitative Standard #1SQS-01-1 $ 175 / 1 x 100 mL33 components in 2-5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 10 396.152As (Arsenic) 10 193.696Ba (Barium) 10 493.409Bi (Bismuth) 10 223.061Ca (Calcium) 10 315.887Cd (Cadmium) 10 226.502Ce (Cerium) 10 413.765Dy (Dysprosium) 10 353.170Er (Erbium) 10 337.271Eu (Europium) 10 381.967Ga (Gallium) 10 294.364Gd (Gadolinium) 10 214.438Ho (Holmium) 10 345.600In (Indium) 10 230.606La (Lanthanum) 10 379.478Lu (Lutetium) 10 261.542Mg (Magnesium) 10 279.079Na (Sodium) 10 589.592Nd (Neodymium) 10 401.225P (Phosphorus) 10 213.618Pb (Lead) 10 220.353Pr (Praseodymium) 10 390.844Sc (Scandium) 10 361.384Se (Selenium) 10 196.090Sm (Samarium) 10 359.260Sr (Strontium) 10 421.552Tb (Terbium) 10 350.917Th (Thorium) 10 283.730Tl (Thallium) 10 190.864Tm (Thulium) 10 313.126U (Uranium) 10 385.958Y(Yttrium) 10 320.332Yb (Ytterbium) 10 328.937

Semi-Quantitative Standard #2SQS-02-1 $ 175 / 1 x 100 mL34 components in 2-5% HNO3 tr. HCl tr. HF

Element µg/mL λ (nm)Au (Gold) 10 242.795B (Boron) 10 493.409Be (Beryllium) 10 313.042Co (Cobalt) 10 228.616Cr (Chromium) 10 205.552Cs (Cesium) 10 452.673Cu (Copper) 10 324.754Fe (Iron) 10 259.940Ge (Germanium) 10 209.426Hf (Hafnium) 10 277.336Ir (Iridium) 10 670.784K (Potassium) 10 766.490Li (Lithium) 10 670.784Mn (Manganese) 10 257.610Mo (Molybdenum) 10 203.844Nb (Niobium) 10 309.418Ni (Nickel) 10 231.604Pd (Palladium) 10 340.458Pt (Platinum) 10 214.423Rb (Rubidium) 10 420.185Re (Rhenium) 10 197.313Rh (Rhodium) 10 233.477Ru (Ruthenium) 10 240.272S (Sulfur) 10 180.731Sb (Antimony) 10 206.833Si (Silicon) 10 251.618Sn (Tin) 10 189.989Ta (Tantalum) 10 226.230Te (Tellurium) 10 214.281Ti (Titanium) 10 334.941V (Vanadium) 10 292.402W (Tungsten) 10 207.911Zn (Zinc) 10 213.856Zr (Zirconium) 10 343.823

Semi-Quantitative Standard #3SQS-03-1 $ 35 / 1 x 100 mL2 components in 2-5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 10 194.227Ag (Silver) 10 328.068

69 Elements in Three Mixes Economical Easy to UseThese three Qualitative Standards can be combined to scan samples quickly and easily for elements present. They should be used for elementidentification only. The concentration of each element is approximately 10 µg/mL. To screen for all 69 elements these 3 semi-quantitative standardscan be blended together and used immediately.

Technical NoteTo verify screening results, use singleelement standards to confirm andquantify the concentration.

ICPM

ulti-Element

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Custom StandardsWhen you have a need for unique Analytical Standards,let the experts at AccuStandard assist in designing yourformulation. Our technical group, with over 80 years ofcombined analytical experience, will review your request,suggest the most economical and stable formulation, andprovide pricing all within 24 hours.

For a Quick Quote, copy the custom quote form in theback of catalog and fax it back. We will get right back toyou.

Plus we typically ship within one week after order receipt.

Page 29: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 23

ICPM

ulti-Element

ICPSDWA Standards

Primary Metals for Analysis byICPContains all approved elementsSDWA-04-1 $ 95 / 100 mLSDWA-04-5 $ 185 / 500 mL9 components in 2-5% HNO3

Element µg/mL λ (nm)As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Ni (Nickel) 10 231.604Na (Sodium) 100 588.995

Primary Metals for Analysis byICP-MSContains all approved elementsSDWA-06-MS-1 $ 115 / 100 mLSDWA-06-MS-5 $ 225 / 500 mL11 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 10 206.833As (Arsenic) 10 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Tl (Thallium) 10 190.864

Secondary Metals for Analysis byGFAA / ICP / ICP-MSSDWA-08-1 $ 75 / 100 mLSDWA-08-5 $ 146 / 500 mL5 components in 2-5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 10 308.215Fe (Iron) 100 259.940Mn (Manganese) 10 257.610Ag (Silver) 10 328.068Zn (Zinc) 10 213.856

Primary Metals for Analysis byGFAAContains GFAA approved elementsSDWA-05-1 $ 95 / 100 mLSDWA-05-5 $ 185 / 500 mL9 components in 2-5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 10 206.833As (Arsenic) 10 193.696Cd (Cadmium) 10 226.502Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Tl (Thallium) 10 190.864

Primary & Secondary Metals forAnalysis by GFAA/ICP/ICP-MSContains all Primary & Secondary MetalsSDWA-09-1 $ 195 / 100 mLSDWA-09-5 $ 370 / 500 mL19 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 10 308.215Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Fe (Iron) 100 259.940Pb (Lead) 10 220.353Mn (Manganese) 10 257.610Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Si (Silicon) † 100 251.611Ag (Silver) 10 328.068Na (Sodium) 100 588.995Tl (Thallium) 10 190.864Zn (Zinc) 10 213.856

† 214 µg/mL as SiO2

Primary Metals for Analysis byGFAA / ICP / ICP-MSSDWA-07-1 $ 135 / 100 mLSDWA-07-5 $ 264 / 500 mL14 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Si (Silicon) † 100 251.611Na (Sodium) 100 588.995Tl (Thallium) 10 190.864

† 214 µg/mL as SiO2

SDWA StandardsFor use in SW-846, Method 1310 and U.S. NPDWR 40CFR Part 141. The three Drinking Water Standards are used for monitoring drinking waterand/or ground and surface water.

Primary Drinking Water MetalsSDWA-01-1 $ 85 / 100 mLSDWA-01-5 $ 165 / 500 mL7 components in 2% HNO3

Element µg/mL λ (nm)As (Arsenic) 10 193.696Ba (Barium) 100 493.409Cd (Cadmium) 5 226.502Cr (Chromium) 10 205.552Pb (Lead) 10 220.353Se (Selenium) 5 196.090Ag (Silver) 10 328.068

Secondary Drinking Water MetalsSDWA-02-1 $ 72 / 100 mLSDWA-02-5 $ 139 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Cu (Copper) 100 324.754Fe (Iron) 30 259.940Mn (Manganese) 5 257.610Zn (Zinc) 500 213.856

Mercury SolutionSDWA-03-1 $ 34 / 100 mLSDWA-03-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.232

Set of Drinking Water Standards

SDWA-01-1 SDWA-02-1 SDWA-03-1

SDWA-1-SET $ 154 / 3 x 100 mL

Standards for Analytes covered in the Safe Drinking Water Act (SDWA)

SDWA-01-5 SDWA-02-5 SDWA-03-5

SDWA-5-SET $ 298 / 3 x 500 mL

Page 30: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

24 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

Trace Metals IWPTM-01-1 $ 140 / 100 mLWPTM-01-5 $ 273 / 500 mL15 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 500 396.152As (Arsenic) 100 189.042Be (Beryllium) 100 313.042Cd (Cadmium) 25 214.438Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Mn (Manganese) 100 257.610Hg (Mercury) 5 194.232Ni (Nickel) 100 231.604Se (Selenium) 25 196.090V (Vanadium) 250 292.402Zn (Zinc) 100 213.856

Trace Metals IIWPTM-02-1 $ 64 / 100 mLWPTM-02-5 $ 123 / 500 mL3 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 20 217.581Ag (Silver) 10 328.068Tl (Thallium) 20 351.924

Trace Metals IIIWPTM-03-1 $ 85 / 100 mLWPTM-03-5 $ 165 / 500 mL6 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Ba (Barium) 500 233.527Ca (Calcium) 500 317.933Mg (Magnesium) 100 279.553Mo (Molybdenum) 500 202.030K (Potassium) 100 766.490Na (Sodium) 500 589.592

WPTM-5-SET $ 445 / 3 x 500 mL

Trace Metals Sets

WPTM-1-SET $ 230 / 3 x 100 mL

WPTM-01-1WPTM-02-1

WPTM-03-1 WPTM-01-5WPTM-02-5

WPTM-03-5

Trace Metals I, II, III

Groundwater & Wastewater Standards

Alternate Metals IIIWPAM-03-1 $ 65 / 100 mLWPAM-03-5 $ 125 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Ca (Calcium) 500 317.933Mg (Magnesium) 100 279.553K (Potassium) 100 766.490Na (Sodium) 500 589.592

Alternate Metals IWPAM-01-1 $ 105 / 100 mLWPAM-01-5 $ 200 / 500 mL11 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 20 396.152Sb (Antimony) 5 217.581Be (Beryllium) 5 313.042Co (Cobalt) 10 228.616Cu (Copper) 10 324.754Fe (Iron) 20 259.940Mn (Manganese) 10 257.610Ni (Nickel) 10 231.604Tl (Thallium) 5 351.924V (Vanadium) 20 292.402Zn (Zinc) 10 213.856

Alternate Metals for Groundwater and Wastewater Analysis

WPAM-1-SET $ 133 / 2 x 100 mL

WPAM-01-1 WPAM-03-1

WPAM-5-SET $ 260 / 2 x 500 mL

WPAM-01-5 WPAM-03-5

Alternate Trace Metals Sets

ICPGroundwater, Wastewater & TCLP

TCLP Standard #1TCLP-01-1 $ 98 / 100 mLTCLP-01-5 $ 190 / 500 mL7 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 25 189.042Ba (Barium) 500 233.527Cd (Cadmium) 5 214.438Cr (Chromium) 25 205.552Pb (Lead) 25 220.353Se (Selenium) 5 196.090Ag (Silver) 25 328.068

TCLP Standard for ICPTCLP-ICP-1 $ 68 / 100 mLTCLP-ICP-5 $ 132 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 500 233.527Cd (Cadmium) 5 214.438Cr (Chromium) 25 205.552Ag (Silver) 25 328.068

TCLP Standard for GFAATCLP-GFAA-1 $ 50 / 100 mLTCLP-GFAA-5 $ 110 / 500 mL3 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 25 189.042Pb (Lead) 25 220.353Se (Selenium) 5 196.090

TCLP Standard #2For Mercury Analysis using ICP or Cold Vapor AATCLP-02-1 $ 34 / 100 mLTCLP-02-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.232

For use in SW-846, Method 1311 Toxicity Characteristic Leaching Procedure

TCLP Multi-Element Calibration Standards

ICPM

ulti-Element

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 31: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 25

ICPM

ulti-Element

ICPMISA Test Group 29

MISA Standard 3TelluriumMISA-03-1 $ 34 / 100 mL1 component in 100 µg/mL in 10% HCl

Element λ (nm)Te (Tellurium) 214.281

MISA Standard 5Fluoride Soluble GroupMISA-05-1 $ 125 / 100 mL15 components in 100 µg/mL in HNO3 tr. HF

Element λ (nm)Sb (Antimony) 206.833B (Boron) 249.773Ge (Germanium) 209.426Hf (Hafnium) 277.336Mo (Molybdenum) 202.030Nb (Niobium) 309.418P (Phosphorus) 213.618Re (Rhenium) 197.313Si (Silicon) 251.618S (Sulfur) 180.731Ta (Tantalum) 226.230Sn (Tin) 189.989Ti (Titanium) 334.941W (Tungsten) 207.911Zr (Zirconium) 343.823

MISA Standard 4Alkali, Alkaline Earth, Non-TransitionGroupMISA-04-1 $ 125 / 100 mL16 components in 100 µg/mL in 10% HNO3

Element λ (nm)Al (Aluminum) 309.271As (Arsenic) 193.696Ba (Barium) 455.403Be (Beryllium) 313.042Bi (Bismuth) 223.061Ca (Calcium) 393.366Cs (Cesium) 452.673Ga (Gallium) 294.364In (Indium) 230.606Li (Lithium) 670.784Mg (Magnesium) 279.553K (Potassium) 766.490Rb (Rubidium) 420.185Se (Selenium) 196.026Na (Sodium) 589.995Sr (Strontium) 407.771

MISA Standard 6Transition MetalsMISA-06-1 $ 125 / 100 mL13 components in 100 µg/mL in 10% HNO3

Element λ (nm)Cd (Cadmium) 214.438Co (Cobalt) 238.892Cu (Copper) 324.754Cr (Chromium) 205.552Fe (Iron) 238.204Pb (Lead) 220.353Mn (Manganese) 257.610Hg (Mercury) 214.281Ni (Nickel) 231.604Ag (Silver) 328.068Tl (Thallium) 190.864V (Vanadium) 292.402Zn (Zinc) 213.856

Complete Calibration SetMISA-1-SET $ 525 / 6 x 100 mL

MISA-01-1MISA-02-1

MISA-03-1MISA-04-1

MISA Standard 1Rare Earth MetalsMISA-01-1 $ 125 / 100 mL18 components in 100 µg/mL in 5% HNO3

Element λ (nm)Ce (Cerium) 413.765Dy (Dysprosium) 353.170Er (Erbium) 337.271Eu (Europium) 381.967Gd (Gadolinium) 342.247Ho (Holmium) 345.600La (Lanthanum) 379.478Lu (Lutetium) 261.542Nd (Neodymium) 401.225Pr (Praseodymium) 390.844Sc (Scandium) 361.384Sm (Samarium) 359.260Tb (Terbium) 350.917Th (Thorium) 283.730Tm (Thulium) 313.126U (Uranium) 385.958Yb (Ytterbium) 328.937Y (Yttrium) 371.030

MISA Standard 2Precious MetalsMISA-02-1 $ 125 / 100 mL6 components in 100 µg/mL in 10% HCl

Element λ (nm)Au (Gold) 242.795Ir (Iridium) 224.268Pd (Palladium) 340.458Pt (Platinum) 214.423Rh (Rhodium) 233.477Ru (Ruthenium) 240.272

For use in MISA Test Group 29 Analysis or general use standards. Set of six standards contains 69 elements at 100 µg/mL each. Ideal for thelaboratory that wants to analyze for everything.

Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L-SET $ 45 / L (2 x 500 mL)

5% HNO3 in ASTM Type I Water

Water BlankCLP-BLW-5 * $ 30 / 500 mLCLP-BLW-L-SET * $ 40 / L (2 x 500 mL)

ASTM Type I Water

Hydrochloric Acid BlankCLP-BLH-5 $ 30 / 500 mLCLP-BLH-L-SET $ 45 / L (2 x 500 mL)

5% HCl in ASTM Type I Water

Mixed Acid BlankCLP-BLMA-5 $ 30 / 500 mLCLP-BLMA-L-SET $ 45 / L (2 x 500 mL)

5% HCl + 1% HNO3 in ASTM Type I Water

MISA-05-1MISA-06-1

MISA Test Group 29 Analysis Calibration Standards

Calibration and Matrix Blanks

Page 32: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

26 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICP Multi-ElementStandard Solution IMES-01-1 $ 176 / 100 mLMES-01-5 $ 343 / 500 mL19 comps. in 1 mol/L HNO3

Element µg/mLAg (Silver) 50Al (Aluminum) 100B (Boron) 15Ba (Barium) 5Be (Beryllium) 1Bi (Bismuth) 200Cd (Cadmium) 20Co (Cobalt) 20Cr (Chromium) 25Cu (Copper) 20Fe (Iron) 15Ga (Gallium) 150In (Indium) 200Mn (Manganese) 5Ni (Nickel) 50Pb (Lead) 200Sr (Strontium) 1Tl (Thallium) 400Zn (Zinc) 20

ICP Multi-ElementStandard Solution IIMES-02-1 $ 109 / 100 mLMES-02-5 $ 214 / 500 mL3 comps. in 1 mol/L HNO3

Element µg/mLLi (Lithium) 250K (Potassium) 10,000Na (Sodium) 1000

ICP Multi-ElementStandard Solution IIIMES-03-1 $ 109 / 100 mLMES-03-5 $ 214 / 500 mL4 comps. in 1 mol/L HNO3

Element µg/mLBa (Barium) 1000Ca (Calcium) 1000Mg (Magnesium) 1000Sr (Strontium) 1000

ICP Multi-ElementStandard Solution IVMES-04-1 $ 227 / 100 mLMES-04-5 $ 681 / 500 mL23 comps. in 1 mol/L HNO3

Element µg/mLAg (Silver) 1000Al (Aluminum) 1000B (Boron) 1000Ba (Barium) 1000Bi (Bismuth) 1000Ca (Calcium) 1000Cd (Cadmium) 1000Co (Cobalt) 1000Cr (Chromium) 1000Cu (Copper) 1000Fe (Iron) 1000Ga (Gallium) 1000In (Indium) 1000K (Potassium) 1000Li (Lithium) 1000Mg (Magnesium) 1000Mn (Manganese) 1000Na (Sodium) 1000Ni (Nickel) 1000Pb (Lead) 1000Sr (Strontium) 1000Tl (Thallium) 1000Zn (Zinc) 1000

ICP Multi-ElementStandard Solution VMES-05-1-SET $200 / 2x100 mLMES-05-5-SET $390 / 2x500 mL26 comps. in 5% HCl

MES-05Element µg/mLK (Potassium) 100Al (Aluminum) 20As (Arsenic) 20Na (Sodium) 20Pb (Lead) 20Se (Selenium) 20Ca (Calcium) 20P (Phosphorus) 20Te (Tellurium) 20Ni (Nickel) 5B (Boron) 2Ba (Barium) 2Cd (Cadmium) 2Cr (Chromium) 2Cu (Copper) 2Fe (Iron) 2Li (Lithium) 2Ti (Titanium) 2Zn (Zinc) 2Be (Beryllium) 1Mg (Magnesium) 1Mn (Manganese) 1Sc (Scandium) 1Sr (Strontium) 1Y (Yttrium) 1

MES-05-HGHg (Mercury) 5supplied separately for betterstability in 5% HNO3

Multi-Element ICP

ICPMulti-Element

ICP Multi-ElementStandard Solution VIfor MSMES-06-1-SET $ 230 / 100 mLMES-06-5-SET $ 450 / 500 mL29 comps. in 1 mol/L HNO3 tr. HF

Element µg/mLAg (Silver) 10Al (Aluminum) 10As (Arsenic) 100B (Boron) 100Ba (Barium) 10Be (Beryllium) 100Bi (Bismuth) 10Ca (Calcium) 1000Cd (Cadmium) 10Co (Cobalt) 10Cr (Chromium) 10Cu (Copper) 10Fe (Iron) 100Ga (Gallium) 10K (Potassium) 10Li (Lithium) 10Mg (Magnesium) 10Mn (Manganese) 10Mo (Molybdenum) 10Na (Sodium) 10Ni (Nickel) 10Pb (Lead) 10Rb (Rubidium) 10Se (Selenium) 100Sr (Strontium) 10Tl (Thallium) 10U (Uranium) 10V (Vanadium) 10Zn (Zinc) 100

MES-06-TETe (Tellurium) 10supplied separately for betterstability in 10% HCl

ICP Multi-ElementStandard Solution VIIMES-07-1 * $ 188 / 100 mLMES-07-5 * $ 367 / 500 mL9 comps. in Water tr. HNO3

Element µg/mLNH4 (Ammonium) 100Ba (Barium) 100Ca (Calcium) 100K (Potassium) 100Li (Lithium) 100Mg (Magnesium) 100Mn (Manganese) 100Na (Sodium) 100Sr (Strontium) 100

ICP Multi-ElementStandard Solution VIIIMES-08-1-SET $ 190 / 2x100 mLMES-08-5-SET $ 371 / 2x500 mL24 comps. in 1 mol/L HNO3

MES-08Element µg/mLAl (Aluminum) 100B (Boron) 100Ba (Barium) 100Be (Beryllium) 100Bi (Bismuth) 100Ca (Calcium) 100Cd (Cadmium) 100Co (Cobalt) 100Cr (Chromium) 100Cu (Copper) 100Fe (Iron) 100Ga (Gallium) 100K (Potassium) 100Li (Lithium) 100Mg (Magnesium) 100Mn (Manganese) 100Na (Sodium) 100Ni (Nickel) 100Pb (Lead) 100Se (Selenium) 100Sr (Strontium) 100Tl (Thallium) 100Zn (Zinc) 100

MES-08-TETe (Tellurium) 100supplied separately for betterstability

ICP Multi-ElementStandard Solution IXMES-09-1-SET $ 102 / 2x100 mLMES-09-5-SET $ 199 / 2x500 mL9 comps. in 1 mol/L HNO3

MES-09Element µg/mLAs (Arsenic) 100Be (Beryllium) 100Pb (Lead) 100Cd (Cadmium) 100Cr (Chromium) 100Ni (Nickel) 100Se (Selenium) 100Tl (Thallium) 100

MES-09-HGHg (Mercury) 100supplied separately for betterstability.

ICPM

ulti-Element

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 33: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 27

Mult-Element ICP continued on next page

ICPM

ulti-Element

Multi-Element ICP

ICP Multi-ElementStandard Solution XIIMES-12-1 $ 131 / 100 mLMES-12-5 $ 255 / 500 mL8 comps. in 5% HCl tr. HNO3

Element µg/mLAs (Arsenic) 1000Mo (Molybdenum) 1000P (Phosphorus) 1000S (Sulfur) 1000Si (Silicon) 1000W (Tungsten) 1000V (Vanadium) 1000Zr (Zirconium) 1000

ICP Multi-ElementStandard Solution XIMES-11-1-SET $ 114 / 2x100 mLMES-11-5-SET $ 222 / 2x500 mL6 comps. in 1 mol/L HNO3

MES-11Element µg/mLCd (Cadmium) 10Cr (Chromium) 900Cu (Copper) 800Ni (Nickel) 200Pb (Lead) 900Zn (Zinc) 2500

MES-11-HGHg (Mercury) 8supplied separately for betterproduct stability

ICP Multi-ElementStandard Solution XMES-10-1 $ 200 / 100 mLMES-10-5 $ 390 / 500 mL23 comps. in 1 mol/L HNO3

Element µg/mLCa (Calcium) 3500Mg (Magnesium) 1500Na (Sodium) 800K (Potassium) 300B (Boron) 10Fe (Iron) 10Mo (Molybdenum) 10Sr (Strontium) 10As (Arsenic) 5Ba (Barium) 5Ni (Nickel) 5V (Vanadium) 5Zn (Zinc) 5Mn (Manganese) 3Co (Cobalt) 2.5Pb (Lead) 2.5Be (Beryllium) 2Cd (Cadmium) 2Cr (Chromium) 2Cu (Copper) 2Bi (Bismuth) 1Se (Selenium) 1Tl (Thallium) 1 ICP Multi-Element

Standard Solution XIVMES-14-1 $ 104 / 100 mLMES-14-5 $ 202 / 500 mL11 comps. in 2% HCl tr. HNO3

Element µg/mLP (Phosphorus) 100S (Sulfur) 100K (Potassium) 100As (Arsenic) 20La (Lanthanum) 20Li (Lithium) 20Mo (Molybdenum) 20Mn (Manganese) 20Ni (Nickel) 20Sc (Scandium) 20Na (Sodium) 20

ICP Multi-ElementStandard Solution XVMES-15-1 $ 76 / 100 mLMES-15-5 $ 148 / 500 mL8 comps. in 2% HNO3

Element µg/mLBa (Barium) 1Ca (Calcium) 1K (Potassium) 50La (Lanthanum) 10Li (Lithium) 10Mn (Manganese) 10Na (Sodium) 10Sr (Strontium) 10

ICP Multi-ElementStandard Solution XIIIMES-13-1-SET $ 135 / 2x100 mLMES-13-5-SET $ 264 / 2x500 mL15 comps. in 5% HNO3

MES-13Element µg/mLAl (Aluminum) 500As (Arsenic) 100Be (Beryllium) 100Cd (Cadmium) 25Co (Cobalt) 100Cr (Chromium) 100Cu (Copper) 100Fe (Iron) 100Mn (Manganese) 100Ni (Nickel) 100Pb (Lead) 100Se (Selenium) 25V (Vanadium) 250Zn (Zinc) 100

MES-13-HGHg (Mercury) 5supplied separately for betterstability

ICPMulti-Element

ICP Multi-ElementStandard Solution XVIMES-16-1 $ 190 / 100 mLMES-16-5 $ 370 / 500 mL21 comps. in 5% HNO3 tr. HF

Element µg/mLSb (Antimony) 100As (Arsenic) 100Be (Beryllium) 100Cd (Cadmium) 100Ca (Calcium) 100Cr (Chromium) 100Co (Cobalt) 100Cu (Copper) 100Fe (Iron) 100Pb (Lead) 100Li (Lithium) 100Mg (Magnesium) 100Mn (Manganese) 100Mo (Molybdenum) 100Ni (Nickel) 100Se (Selenium) 100Sr (Strontium) 100Tl (Thallium) 100Ti (Titanium) 100V (Vanadium) 100Zn (Zinc) 100

ICP Multi-ElementStandard Solution XVIIMES-17-1 $ 102 / 100 mLMES-17-5 $ 199 / 500 mL7 comps. in 15% HCl tr. HNO3

Element µg/mLHr (Hafnium) 100Ir (Iridium) 100Sb (Antimony) 100Sn (Tin) 100Ta (Tantalum 100Ti (Titanium) 100Zr (Zirconium) 100

ICP Multi-ElementGF AAS Standard Solution XVIIIMES-18-1 $ 135 / 100 mLMES-18-5 $ 263 / 500 mL16 comps. in 5% HNO3

Element µg/mLAl (Aluminum) 100As (Arsenic) 100Pb (Lead) 100Sb (Antimony) 100Se (Selenium) 100Tl (Thallium) 100Ba (Barium) 50Co (Cobalt) 50Cu (Copper) 50Ni (Nickel) 50Cr (Chromium) 20Fe (Iron) 20Mn (Manganese) 20Ag (Silver) 10Be (Beryllium) 10Cd (Cadmium) 10

ICP Multi-ElementStandard Solution XIXfor MSMES-19-1 $ 86 / 100 mLMES-19-5 $ 168 / 500 mL5 comps. in 1% HNO3

Element µg/mLBe (Beryllium) 1Co (Cobalt) 1In (Indium) 1Tl (Thallium) 1U (Uranium) 1

ICP Multi-ElementStandard Solution XXfor MSMES-20-1 $ 95 / 100 mLMES-20-5 $ 185 / 500 mL11 comps. in 1% HNO3

Element µg/mLMg (Magnesium) 1Cu (Copper) 1Cd (Cadmium) 1Pb (Lead) 1Sc (Scandium) 1Rh (Rhodium) 1Tl (Thallium) 1Ce (Cerium) 1Ge (Germanium) 1Tb (Terbium) 1Ba (Barium) 1

Page 34: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

28 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICPMulti-Element

ICP Multi-ElementStandard Solution XXIfor MSMES-21-1-SET $ 180 / 2x100 mLMES-21-5-SET $ 350 / 2x500 mL30 comps. in 5% HNO3

MES-21Element µg/mLAg (Silver) 10Al (Aluminum) 10As (Arsenic) 10Ba (Barium) 10Be (Beryllium) 10Bi (Bismuth) 10Ca (Calcium) 10Cd (Cadmium) 10Co (Cobalt) 10Cr (Chromium) 10Cs (Cesium) 10Cu (Copper) 10Fe (Iron) 10Ga (Gallium) 10In (Indium) 10K (Potassium) 10Li (Lithium) 10Mg (Magnesium) 10Mn (Manganese) 10Na (Sodium) 10Ni (Nickel) 10Pb (Lead) 10Rb (Rubidium) 10Se (Selenium) 10Sr (Strontium) 10Tl (Thallium) 10V (Vanadium) 10U (Uranium) 10Zn (Zinc) 10

MES-21-HGHg (Mercury) 10supplied separately for betterproduct stability

ICP Multi-ElementStandard Solution XXIIfor MSMES-22-1 $ 70 / 100 mLMES-22-5 $ 137 / 500 mL5 comps. in 2% HNO3

Element µg/mLCd (Cadmium) 2Cu (Copper) 2Mg (Magnesium) 2Pb (Lead) 2Rh (Rhodium) 2

Multi-Element ICP

ICPM

ulti-Element

Looking for a methodnumber you can’t find in theIndex or Table of Contents?

There are more on ourWebsite.

These products require a Hazardous Shipping Fee except products marked with an asterisk *

EU FormulationScope: For the determinationof 32 elements by ICP(Inductively Coupled Plasma)

DIN EN ISO 11885 - 32Element ICP StandardSetDINENISO-11885-1-SET

$ 245 / 2 x 100 mLDINENISO-11885-5-SET

$480 / 2 x 500 mL

Part 1DINENISO-11885A-1 100 mLDINENISO-11885A-5 500 mL24 comps.in 2-5% HNO3 tr. HF

µg/mLAg (Silver) 20Al (Aluminum) 40As (Arsenic) 80Ba (Barium) 2Be (Beryllium) 2Bi (Bismuth) 40Ca (Calcium) 2Cd (Cadmium) 10Co (Cobalt) 10Cr (Chromium) 10Cu (Copper) 10Fe (Iron) 20K (Potassium) 50Li (Lithium) 2Mg (Magnesium) 1Mn (Manganese) 2Na (Sodium) 20Ni (Nickel) 50Pb (Lead) 50Sb (Antimony) 50Se (Selenium) 50Sr (Strontium) 0.5V (Vanadium) 10Zn (Zinc) 5

Part 2DINENISO-11885B-1 100 mLDINENISO-11885B-5 500 mL8 comps.in 2-5% HNO3 tr. HF

µg/mLB (Boron) 5Mo (Molybdenum) 30P (Phosphorus) 50S (Sulfur) 50Si (Silicon) 20Sn (Tin) 50Ti (Titanium) 5Zr (Zirconium) 10

ICP-PWDRES-5 $ 125 / 500 mL3 components in 5% HNO3

Element µg/mL λ (nm)Pb (Lead) 5 220.353Ba (Barium) 5 493.409Sb (Antimony) 0.2 206.833

This is used in forensic applicationsfor analyzing wipes for the presenceof gun powder residue.

Gun Powder Residue

Page 35: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

29

Calibration Standard #5CLP-CAL-05-1 $ 34 / 100 mL1 component in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 600 217.581

Calibration Standard #4CLP-CAL-04-1 $ 65 / 100 mL5 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 100 189.042Cd (Cadmium) 50 214.438Pb (Lead) 50 220.353Se (Selenium) 50 196.090Tl (Thallium) 100 351.924

Calibration Standard #3CLP-CAL-03-1 $ 95 / 100 mL7 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 2000 396.152Ba (Barium) 2000 233.527Be (Beryllium) 50 313.042Co (Cobalt) 500 228.616Cu (Copper) 250 324.754Fe (Iron) 1000 259.940V (Vanadium) 500 292.402Calibration Standard #2

CLP-CAL-02-1 $ 75 / 100 mL5 components in 5% HNO3

Element µg/mL λ (nm)Cr (Chromium) 100 205.552Mn (Manganese) 150 257.610Ni (Nickel) 400 231.604Ag (Silver) 100 328.068Zn (Zinc) 200 213.856

Calibration Standard #7CLP-CAL-07-1 * $ 55 / 100 mL3 components in H2O tr. HF

Element µg/mL λ (nm)B (Boron) 500 249.773Mo (Molybdenum) 500 202.030Si (Silicon) 500 251.611

Calibration Standard #6CLP-CAL-06-1 $ 34 / 100 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 100 194.232

Calibration Standard #1CLP-CAL-01-1 $ 110 / 100 mL4 components in 5% HNO3

Element µg/mL λ (nm)Ca (Calcium) 5000 317.933Mg (Magnesium) 5000 279.553K (Potassium) 5000 766.490Na (Sodium) 5000 589.592

CLP-CAL-1-SET $ 375 / 7 x 100 mL

Set of 7 Calibration Standards

CLP-CAL-01CLP-CAL-02CLP-CAL-03CLP-CAL-04

CLP-CAL-05CLP-CAL-06CLP-CAL-07

Nitric Acid BlankCLP-BLN-5 $ 30 / 500 mLCLP-BLN-L-SET $ 45 / L (2 x 500 mL)

5% HNO3 in ASTM Type I Water

Water BlankCLP-BLW-5 * $ 30 / 500 mLCLP-BLW-L-SET * $ 40 / L (2 x 500 mL)

ASTM Type I Water

Hydrochloric Acid BlankCLP-BLH-5 $ 30 / 500 mLCLP-BLH-L-SET $ 45 / L (2 x 500 mL)

5% HCl in ASTM Type I Water

Mixed Acid BlankCLP-BLMA-5 $ 30 / 500 mLCLP-BLMA-L-SET $ 45 / L (2 x 500 mL)

5% HCl + 1% HNO3 in ASTM Type I Water

Contract Laboratory Program (CLP) for ICP

Calibration Check Standards

Calibration and Matrix Blanks

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com

CLP

Custom StandardsWhen you have a need for unique Analytical Standards, letthe experts at AccuStandard assist in designing yourformulation. Our technical group, with over 80 years ofcombined analytical experience, will review your request,suggest the most economical and stable formulation, andprovide pricing all within 24 hours.

For a Quick Quote, copy the custom quote form in the backof catalog and fax it back. We will get right back to you.

Plus we typically ship within one week after order receipt.

Page 36: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

30 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

CLP Soil Spiking SolutionCLP-SPS-02-1 $ 175 / 100 mL16 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 217.581As (Arsenic) 400 189.042Ba (Barium) 400 233.527Be (Beryllium) 10 313.042Cd (Cadmium) 10 214.438Cr (Chromium) 40 205.552Co (Cobalt) 100 228.616Cu (Copper) 50 324.754Pb (Lead) 100 220.353Mn (Manganese) 100 257.610Ni (Nickel) 100 231.604Se (Selenium) 400 196.090Ag (Silver) 10 328.068Tl (Thallium) 400 351.924V (Vanadium) 100 292.402Zn (Zinc) 100 213.856

CLP-SPS-01-1CLP-SPS-02-1

CLP Spiking Set

CLP-SPS-1-SET $ 288 / 2 x 100 mL

Spiking SolutionCLP-SPS-01-1 $ 185 / 100 mL18 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 200 396.152Sb (Antimony) 50 217.581As (Arsenic) 200 189.042Ba (Barium) 200 233.527Be (Beryllium) 5 313.042Cd (Cadmium) 5 214.438Cr (Chromium) 20 205.552Co (Cobalt) 50 228.616Cu (Copper) 25 324.754Fe (Iron) 100 259.940Pb (Lead) 50 220.353Mn (Manganese) 50 257.610Ni (Nickel) 50 231.604Se (Selenium) 200 196.090Ag (Silver) 5 328.068Tl (Thallium) 200 351.924V (Vanadium) 50 292.402Zn (Zinc) 50 213.856

Complete Verification Set:Initial & Continuing Calibration

CLP-ICV-01-5CLP-CCV-01-5

CLP-ICV-01-1CLP-CCV-01-1

CLP-VER-R-1-SET $ 445 / 4 x 100 mLCLP-ICV-01-R-1CLP-CCV-01-1

CLP-VER-R-5-SET $ 870 / 4 x 500 mLCLP-ICV-01-R-5CLP-CCV-01-5

Revised Verification Set: Initial & Continuing Calibration

CLP-CCV-02-1CLP-CCV-03-1

CLP-CCV-02-5CLP-CCV-03-5

CLP-CCV-02-1CLP-CCV-03-1

CLP-CCV-02-5CLP-CCV-03-5

Contract Laboratory Program (CLP) for ICP

Technical NoteCLP-ICV-01-R has the Ca, Mg, K & Naat 1/10 the concentration of CLP-ICV-01.This improves plasma robustness andoften results in superior recoveries.

Verification Standards

CLP-CCV-02-1 $ 75 / 100 mLCLP-CCV-02-5 $ 146 / 500 mL5 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 50 189.042Cd (Cadmium) 25 214.438Pb (Lead) 25 220.353Se (Selenium) 25 196.090Tl (Thallium) 50 351.924

Spiking Standards

Technical NoteSpiking solution CLP-SPS-01 can beused for both aqueous and solidsamples. An additional spiking solutionfor soil as outlined in CLP SOW ILM03.0is also available, CLP-SPS-02.

CLP-CCV-03-1 $ 34 / 100 mLCLP-CCV-03-5 $ 67 / 500 mL1 component in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 300 217.581

CLP-VER-1-SET $ 445 / 4 x 100 mL

CLP-VER-5-SET $ 870 / 4 x 500 mL

Initial Calibration VerificationCLP-ICV-01-1 $ 225 / 100 mLCLP-ICV-01-5 $ 445 / 500 mL22 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 200 396.152Sb (Antimony) 60 217.581As (Arsenic) 10 189.042Ba (Barium) 200 233.527Be (Beryllium) 5 313.042Cd (Cadmium) 5 214.438Ca (Calcium) 5000 317.933Cr (Chromium) 10 205.552Co (Cobalt) 50 228.616Cu (Copper) 25 324.754Fe (Iron) 100 259.940Pb (Lead) 5 220.353Mg (Magnesium) 5000 297.553Mn (Manganese) 15 257.610Ni (Nickel) 40 231.604K (Potassium) 5000 766.490Se (Selenium) 5 196.090Ag (Silver) 10 328.068Na (Sodium) 5000 589.592Tl (Thallium) 10 351.924V (Vanadium) 50 292.402Zn (Zinc) 20 213.856

Initial Calibration VerificationCLP-ICV-01-R-1 $ 225 / 100 mLCLP-ICV-01-R-5 $ 445 / 500 mL22 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 200 396.152Sb (Antimony) 60 217.581As (Arsenic) 10 189.042Ba (Barium) 200 233.527Be (Beryllium) 5 313.042Cd (Cadmium) 5 214.438Ca (Calcium) 500 317.933Cr (Chromium) 10 205.552Co (Cobalt) 50 228.616Cu (Copper) 25 324.754Fe (Iron) 100 259.940Pb (Lead) 5 220.353Mg (Magnesium) 500 297.553Mn (Manganese) 15 257.610Ni (Nickel) 40 231.604K (Potassium) 500 766.490Se (Selenium) 5 196.090Ag (Silver) 10 328.068Na (Sodium) 500 589.592Tl (Thallium) 10 351.924V (Vanadium) 50 292.402Zn (Zinc) 20 213.856

Continuing Calibration Verification(Meets CLP QA Second Source Requirements)CLP-CCV-01-1 $ 225 / 100 mLCLP-CCV-01-5 $ 445 / 500 mL16 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 1000 396.152Ba (Barium) 1000 233.527Be (Beryllium) 25 313.042Ca (Calcium) 2500 317.933Cr (Chromium) 50 205.552Co (Cobalt) 250 228.616Cu (Copper) 125 324.754Fe (Iron) 500 259.940Mg (Magnesium) 2500 297.553Mn (Manganese) 75 257.610Ni (Nickel) 200 231.604K (Potassium) 2500 766.490Ag (Silver) 50 328.068Na (Sodium) 2500 589.592V (Vanadium) 250 292.402Zn (Zinc) 100 213.856

Continuing CalibrationVerification Standards Sets

CLP-CCV-01-5CLP-CCV-02-5

CLP-CCV-5-SET $ 525 / 3 x 500 mL

CLP-CCV-1-SET $ 275 / 3 x 100 mLCLP-CCV-01-1CLP-CCV-02-1

CLP-CCV-03-1

CLP-CCV-03-5

CLP

Page 37: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

31Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com

CLP Detection Limits Standard #1CLP-CRDL-01-1 $ 130 / 100 mL15 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 120 217.581As (Arsenic) 120 189.042Be (Beryllium) 10 313.042Cd (Cadmium) 10 214.438Cr (Chromium) 20 205.552Co (Cobalt) 100 228.616Cu (Copper) 50 324.754Pb (Lead) 120 220.353Mn (Manganese) 30 257.610Ni (Nickel) 80 231.604Se (Selenium) 120 196.090Ag (Silver) 20 328.068Tl (Thallium) 120 351.924V (Vanadium) 100 292.402Zn (Zinc) 40 213.856

CLP Detection Limits Standard #2CLP-CRDL-02-1 $ 130 / 100 mL15 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 120 217.581As (Arsenic) 20 189.042Be (Beryllium) 10 313.042Cd (Cadmium) 10 214.438Cr (Chromium) 20 205.552Co (Cobalt) 100 228.616Cu (Copper) 50 324.754Pb (Lead) 6 220.353Mn (Manganese) 30 257.610Ni (Nickel) 80 231.604Se (Selenium) 10 196.090Ag (Silver) 20 328.068Tl (Thallium) 20 351.924V (Vanadium) 100 292.402Zn (Zinc) 40 213.856

Contract Required DetectionLimits (CRDL) SetCLP-CRDL-1-SET $ 205 / 2 x 100 mL

CLP-CRDL-01CLP-CRDL-02

Contract Required Detection Limits (CRDL) Standard Solutions. We offer the flexibility of two convenient solutions:

Contract Laboratory Program (CLP) for ICP

Detection Limit Standards

Technical NotePrepared to meet the requirements ofthe CLP protocol; Arsenic (As), Lead(Pb), Selenium (Se) and Thallium (Tl)are at a concentration of two times theinstrument detection limit (IDL) while theremaining elements are at two times theCRDL.

Technical NoteDesigned for ICPs equipped withultrasonic nebulizers and offers theelements of interest at two times theCRDL level.

Alternate AnalytesCLP-PAN-02-1 $ 115 / 100 mLCLP-PAN-02-5 $ 225 / 500 mL12 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 396.152Sb (Antimony) 100 217.581As (Arsenic) 100 189.042B (Boron) 100 249.773Ca (Calcium) 10 317.933Fe (Iron) 10 259.940Mg (Magnesium) 10 297.553Mo (Molybdenum) 100 202.030Se (Selenium) 100 196.090Si (Silicon) 10 251.611Na (Sodium) 100 589.592Tl (Thallium) 100 351.924

Alternate InterferentsCLP-PIN-02-1 $ 98 / 100 mLCLP-PIN-02-5 $ 185 / 500 mL6 components in 5% HNO3

Element µg/mL λ (nm)Cr (Chromium) 1000 205.552Cu (Copper) 1000 324.754Mn (Manganese) 1000 257.610Ni (Nickel) 1000 231.604Ti (Titanium) 1000 334.941V (Vanadium) 1000 292.402

Primary InterferentsCLP-PIN-01-1 $ 110 / 100 mLCLP-PIN-01-5 $ 215 / 500 mL4 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 5000 396.152Ca (Calcium) 5000 317.933Fe (Iron) 2000 259.940Mg (Magnesium) 5000 297.553

Interferent / Analyte Sets

CLP-PIN-01-1CLP-PAN-01-1

CLP-PIN-01-5CLP-PAN-01-5

Primary AnalytesCLP-PAN-01-1 $ 110 / 100 mLCLP-PAN-01-5 $ 225 / 500 mL12 components in 5% HNO3

Element µg/mL λ (nm)Ag (Silver) 100 328.068Ba (Barium) 50 233.527Be (Beryllium) 50 313.042Cd (Cadmium) 100 214.438Co (Cobalt) 50 228.616Cr (Chromium) 50 205.552Cu (Copper) 50 324.754Mn (Manganese) 50 257.610Ni (Nickel) 100 231.604Pb (Lead) 100 220.353V (Vanadium) 50 292.402Zn (Zinc) 100 213.856

The common interferents checked for by CLP requirements and their associated analytes are listed in our primary interferent analyte solutions.Occasionally, additional interferents may cause other analytical problems according to CLP SOW ILM03.0. These additional six elements areavailable with their respective analytes in the alternate interferent/analyte solutions.

CLP-IA-1-SET $ 345 / 4 x 100 mL

CLP-PIN-02-1CLP-PAN-02-1

CLP-IA-5-SET $ 680 / 4 x 500 mL

CLP-PIN-02-5CLP-PAN-02-5

Interference Check & Analyte Solutions

CLP

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 38: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

32 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

GFAA Mercury Standardfor Calibration or SpikingCLP-HG-AA $ 44 / 50 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 100 194.232

GFAA Postdigestion SpikeSolution(2 x CRDL except for Lead)CLP-SP2-AA $ 44 / 50 mL6 component in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 120 217.581As (Arsenic) 20 189.042Cd (Cadmium) 10 214.438Pb (Lead) 20 220.353Se (Selenium) 10 196.090Tl (Thallium) 20 351.924

GFAA Initial CalibrationVerification(Meets CLP Second Source Requirements)CLP-ICV-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 50 217.581As (Arsenic) 25 189.042Cd (Cadmium) 5 214.438Pb (Lead) 25 220.353Se (Selenium) 50 196.090Tl (Thallium) 25 351.924

GFAA Set CLP-AA-SET $ 175 / 5 x 50 mL

CLP-CAL-AACLP-SPI-AACLP-ICV-AA

CLP-HG-AACLP-SP2-AA

All our CLP Solutions are available in One Convenient Cost Saving Kit

You can customize a kit to yourlab's specific needs for comparable savings.

Call our Technical Service Dept. for more information.

GFAA Instrument CalibrationStandardCLP-CAL-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 217.581As (Arsenic) 50 189.042Cd (Cadmium) 10 214.438Pb (Lead) 50 220.353Se (Selenium) 100 196.090Tl (Thallium) 50 351.924

GFAA Predigestion SpikeSolutionCLP-SP1-AA $ 44 / 50 mL6 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 217.581As (Arsenic) 40 189.042Cd (Cadmium) 5 214.438Pb (Lead) 20 220.353Se (Selenium) 10 196.090Tl (Thallium) 50 351.924

Contract Laboratory Standards Available in Sets or One Complete KitCLP-KIT $ 1,500 / 6 CLP Sets listed below 24 standard solutions

CLP-CAL-1-SET $ 375 / 7 x 100 mL (contains CLP-CAL-01, 02, 03, 04, 05, 06, 07)CLP-VER-1-SET $ 445 / 4 x 100 mL (contains CLP-ICV-01, CLP-CCV-01, 02, 03)CLP-CRDL-1-SET $ 205 / 2 x 100 mL (contains CLP-CRDL-01, 02)CLP-IA-1-SET $ 345 / 4 x 100 mL (contains CLP-PIN-01, 02, & CLP-PAN-01, 02)CLP-SPS-1-SET $ 288 / 2 x 100 mL (contains CLP-SPS-01, 02)CLP-AA-SET $ 175 / 5 x 50 mL (contains CLP-CAL-AA, CLP-ICV-AA, CLP-SPI-AA, CLP-SP2-AA, & CLP-HG-AA)

Multi-Element Graphite Furnace AA Calibration & Spiking Standards

Contract Laboratory Program (CLP) for ICP

CLP Complete Sets

CLP

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 39: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 33

ICP Method 200.7

Mixed Calibration Standard #3MCS-03-1 $ 64 / 100 mLMCS-03-5 $ 123 / 500 mL3 components in 2% HNO3 tr. HF

Element µg/mL λ (nm)As (Arsenic) 500 189.042Mo (Molybdenum) 100 202.030Si (Silicon) 100 251.611

Mixed Calibration Standard #4MCS-04-1 $ 85 / 100 mLMCS-04-5 $ 165 / 500 mL6 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 200 396.152Ca (Calcium) 1000 317.933Cr (Chromium) 20 205.552Ni (Nickel) 20 231.604K (Potassium) 400 766.490Na (Sodium) 200 589.592

Mixed Calibration Standard #1MCS-01-1 $ 85 / 100 mLMCS-01-5 $ 165 / 500 mL6 components in 2% HNO3

Element µg/mL λ (nm)Be (Beryllium) 50 313.042Cd (Cadmium) 150 214.438Pb (Lead) 500 220.353Mn (Manganese) 100 220.353Se (Selenium) 200 196.090Zn (Zinc) 150 213.856

Mixed Calibration Standard #2MCS-02-1 $ 85 / 100 mLMCS-02-5 $ 165 / 500 mL5 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 100 233.527Co (Cobalt) 100 228.61Cu (Copper) 100 324.754Fe (Iron) 10,000 259.940V (Vanadium) 100 292.402

Mixed Calibration Standard #5MCS-05-1 $ 85 / 100 mLMCS-05-5 $ 165 / 500 mL5 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 200 217.581B (Boron) 100 249.773Mg (Magnesium) 1000 279.553Ag (Silver) 50 328.068Tl (Thallium) 200 351.924

Mixed CalibrationStandards (1986) Set

MCS-01-1MCS-02-1

MCS-03-1MCS-04-1

MCS-05-1

MCS-01-5MCS-02-5

MCS-03-5MCS-04-5

MCS-05-5

MCS-1986-5-SET $ 625 / 5 x 500 mL

MCS-1986-1-SET $ 320 / 5 x 100 mL

Five calibration standards are available for routine instrument calibration for use in SW-846, Method 200.7 (rev. March 1983) and Method 6010 (rev.0, Sept. 1986).

SW-846, Method 200.7 & 6010 Calibration Standards

Don't see the exact solution you need?Call our Inorganic Technical Service Department for a custom solutionor synthesis quotation or, if you prefer, fax us the custom quotationrequest form in the back of the catalog.

Spiking Standard #1RM-200.7-SP-01-R * $ 50 / 50 mL4 components in H2O tr. HF

Element µg/mL λ (nm)B (Boron) 400 249.678Mo (Molybdenum) 200 203.844Si (Silicon) † 2000 251.611P (Phosphorus) 400 214.914

† 4278 µg/mL SiO2

Spiking Standard #2RM-200.7-SP-02-R $ 59 / 50 mLM-200.7-SP-02-R-1 $ 118 / 100 mLM-200.7-SP-02-R-5 $ 480 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Ca (Calcium) 10,000 315.887Mg (Magnesium) 10,000 279.079K (Potassium) 10,000 766.491Na (Sodium) 10,000 588.595

Spiking Standard #4RM-200.7-SP-04-R $ 20 / 50 mL1 component in dilute HNO3

Element µg/mL λ (nm)Sb (Antimony) 200 206.833

Method 200.7 Spiking SetM-200.7-SP-R-SET $ 225 / 5 x 50 mL

Spiking Standard #5RM-200.7-SP-05-R $ 55 / 50 mL5 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 200 193.696Cd (Cadmium) 100 226.502Pb (Lead) 200 220.353Se (Selenium) 400 196.090Tl (Thallium) 400 190.864

M-200.7-SP-01-RM-200.7-SP-02-RM-200.7-SP-03

M-200.7-SP-04-RM-200.7-SP-05-R

Spiking Standard #3M-200.7-SP-03 $ 95 / 50 mL12 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 2000 396.152Ba (Barium) 2000 233.527Be (Beryllium) 50 313.042Cr (Chromium) 200 205.552Co (Cobalt) 500 228.616Cu (Copper) 250 324.754Fe (Iron) 1000 259.940Mn (Manganese) 500 257.610Ni (Nickel) 500 231.604Ag (Silver) 50 328.068V (Vanadium) 500 292.402Zn (Zinc) 500 213.856

Method 200.7 Spiking Solutions for Drinking Water

SW-846,M

ethod200.7

&6010

Page 40: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

34 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

ICP Method 200.7

SIC Solution #3Used to evaluate the spectral interferencefor the analytes: Sb, Zn, As, Ag, Cr, Mn, VSICS-03-1 $ 52 / 100 mLSICS-03-5 $ 102 / 500 mL3 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 30 308.215Fe (Iron) 150 259.940Ni (Nickel) 20 231.604

SIC Solution #2Used to evaluate the spectral interferencefor the analytes: Sb, Pb, Zn, Mo, As, BeSICS-02-1 $ 61 / 100 mLSICS-02-5 $ 119 / 500 mL5 components in 2% HNO3

Element µg/mL λ (nm)Cr (Chromium) 20 205.552Co (Cobalt) 10 228.616Cu (Copper) 40 324.754Mn (Manganese) 20 257.610V (Vanadium) 10 292.402

SIC Solution #1Used to evaluate the spectral interferencefor the analytes: Al, Sb, Se, Sn, VSICS-01-1 $ 34 / 100 mLSICS-01-5 $ 67 / 500 mL1 component in 2% HNO3 tr. HF

Element µg/mL λ (nm)Mo (Molybdenum) 50 203.844

Check Solutions Sets

SIC-1-SET $ 120 / 3 x 100 mL

SICS-03-1SICS-01-1SICS-02-1

SIC-5-SET $ 230 / 3 x 500 mL

SICS-01-5SICS-02-5

SICS-03-5

Since everyone experiences different interference problems in their analysis, it is often easiest to design standards to match the "real world"samples. Below is a set of single element standards that can be used for making these standards in your lab. If you would like us to formulatethese solutions for you, please call our Technical Service Department for a custom quote.

Al (Aluminum) ICP-01N-1Cr (Chromium) ICP-13N-1Co (Cobalt) ICP-14N-1Cu (Copper) ICP-15N-1Fe (Iron) ICP-27N-1Mn (Manganese) ICP-33N-1Mo (Molybdenum) ICP-35W-1Ni (Nickel) ICP-37N-1V (Vanadium) ICP-67N-1

Spectral Interference Check SetSIC-SING-1-SET $ 240 / 9 x 100 mLSingle Elements @ 1,000 µg/mL

For use in testing and verifying the inter-element spectral correction process.

Method 200.7 Interference Check Standards

Method

200.7

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 41: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 35

ICP Method 200.7

Laboratory Performance Check StandardFor use in demonstrating the initial andcontinuing verification of the calibrationcurves produced by this method.LPCS-01-1 $ 220 / 100 mLLPCS-01-5 $ 440 / 500 mL29 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 20 308.215Sb (Antimony) 20 206.833As (Arsenic) 20 193.696Ba (Barium) 20 493.409Be (Beryllium) 20 313.042B (Boron) 20 249.678Cd (Cadmium) 20 226.502Ca (Calcium) 20 315.887Cr (Chromium) 20 205.552Co (Cobalt) 20 228.616Cu (Copper) 20 324.754Fe (Iron) 20 259.940Pb (Lead) 20 220.353Li (Lithium) 20 670.784Mg (Magnesium) 20 279.079Mn (Manganese) 20 257.610Mo (Molybdenum) 20 203.844Ni (Nickel) 20 231.604P (Phosphorus) 100 214.914K (Potassium) 100 766.491Se (Selenium) 20 196.090Si (Silicon) † 100 251.611Ag (Silver) 5 328.068Na (Sodium) 20 588.995Sr (Strontium) 20 421.552Tl (Thallium) 20 190.864Sn (Tin) 20 189.980V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

† 214 µg/mL as SiO2

Mercury StandardMercury is available in a separate solutiondue to incompatibility with other elements.TCLP-02-1 $ 34 / 100 mLTCLP-02-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.227

Laboratory Fortifying StockSolutionFor use in preparing the laboratory fortifiedblank and the laboratory fortified samplematrix.LFSS-01-1 $ 195 / 100 mLLFSS-01-5 $ 380 / 500 mL25 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 25 308.215Sb (Antimony) 25 206.833As (Arsenic) 25 193.696Ba (Barium) 25 493.409Be (Beryllium) 5 313.042B (Boron) 25 249.678Cd (Cadmium) 10 226.502Cr (Chromium) 25 205.552Co (Cobalt) 10 228.616Cu (Copper) 25 324.754Fe (Iron) 25 259.940Pb (Lead) 25 220.353Li (Lithium) 25 670.784Mn (Manganese) 25 257.610Mo (Molybdenum) 10 203.844Ni (Nickel) 25 231.604P (Phosphorus) 50 214.914Se (Selenium) 25 196.090Si (Silicon) † 25 251.611Ag (Silver) 2.5 328.068Sr (Strontium) 25 421.552Tl (Thallium) 25 190.864Sn (Tin) 10 189.980V (Vanadium) 10 292.402Zn (Zinc) 25 213.856

† 53.5 µg/mL as SiO2

Method 200.7 Performance Check, Fortifying Solution & Mercury Standard

Technical NoteThe analytes Ca, K, Mg, and Na arenot included in the stock solutionbecause their concentrations vary widelyin environmental samples.

Mixed Calibration Standard #2M-200.7-02R-1 $ 75 / 100 mLM-200.7-02R-5 $ 135 / 500 mL6 components in 5% HNO3

Element µg/mL λ (nm)Li (Lithium) 50 670.784Mo (Molybdenum) 100 203.844K (Potassium) 200 766.491Na (Sodium) 100 588.995Sr (Strontium) 10 421.552Ti (Titanium) 100 334.941

Mixed Calibration Standard #5M-200.7-05-1 $ 69 / 100 mLM-200.7-05-5 $ 134 / 500 mL6 components in 5% HNO3

Element µg/mL λ (nm)Be (Beryllium) 10 313.042Fe (Iron) 100 259.940Pb (Lead) 100 220.353Mg (Magnesium) 100 279.553Ni (Nickel) 20 231.604Tl (Thallium) 50 190.864Mixed Calibration Standard #4

M-200.7-04-1 $ 69 / 100 mLM-200.7-04-5 $ 134 / 500 mL5 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Cr (Chromium) 50 205.552Si (Silicon) † 100 251.611Sn (Tin) 40 189.980Zn (Zinc) 50 213.856

† 214 µg/mL as SiO2

M-200.7-01-1M-200.7-02R-1M-200.7-03R-1

M-200.7-04-1M-200.7-05-1

M-200.7-01-5M-200.7-02R-5M-200.7-03-5R

M-200.7-04-5M-200.7-05-5

Mixed CalibrationStandards Sets

M-200.7-5-R-SET $ 545 / 5 x 500 mL

Mixed Calibration Standard #1M-200.7-01-1 $ 96 / 100 mLM-200.7-01-5 $ 187 / 500 mL10 components in 5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 50 206.833As (Arsenic) 100 193.696Ba (Barium) 10 493.409B (Boron) 20 249.678Cd (Cadmium) 20 226.502Ca (Calcium) 100 315.887Cu (Copper) 20 324.754Mn (Manganese) 20 257.610Se (Selenium) 50 196.090Ag (Silver) 5 328.068

Mixed Calibration Standard #3M-200.7-03R-1 $ 55 / 100 mLM-200.7-03R-5 $ 105 / 500 mL4 components in 5% HNO3

Element µg/mL λ (nm)Ce (Cerium) 20 413.765Co (Cobalt) 20 228.616P (Phosphorus) 100 214.914V (Vanadium) 20 292.402

Method 200.7 (Revision 4.4, May 1994) Calibration Standards

M-200.7-1-R-SET $ 280 / 5 x 100 mL

Method

200.7

Page 42: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

36 AccuStandard's Quality System is Certified to Comply with ISO 9001 & ISO 17025

ICP Method 200.7(Revision 4.4, May 1994)

Instrument Fortifying StandardM-200.7-LFSS-01-1 $ 200 / 100 mLM-200.7-LFSS-01-5 $ 390 / 500 mL26 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 20 309.271As (Arsenic) 20 193.696Ba (Barium) 20 455.403Be (Beryllium) 20 313.042B (Boron) 20 249.773Cd (Cadmium) 20 226.502Ca (Calcium) 20 315.887Ce (Cerium) 20 413.765Cr (Chromium) 20 205.552Co (Cobalt) 20 238.892Cu (Copper) 20 324.754Fe (Iron) 20 238.204Pb (Lead) 20 220.353Li (Lithium) 20 670.786Mg (Magnesium) 20 279.553Mn (Manganese) 20 257.610Ni (Nickel) 20 231.604P (Phosphorus) 20 213.618K (Potassium) 500 766.461Se (Selenium) 20 196.026Ag (Silver) 7.5 328.068Na (Sodium) 20 589.995Sr (Strontium) 20 407.771Tl (Thallium) 20 190.864V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

Instrument Fortifying Standard #2M-200.7-LFSS-02-1 $ 60 / 100 mLM-200.7-LFSS-02-5 $ 120 / 500 mL5 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Sb (Antimony) 20 217.581Mo (Molybdenum) 20 202.030Si (Silicon) † 20 251.611Sn (Tin) 20 189.980Ti (Titanium) 20 334.941

† 42.78 µg/mL as SiO2

Instrument Fortifying Standardfor Water M-200.7-LFSS-01W-1 $ 195 / 100 mLM-200.7-LFSS-01W-5 $ 380 / 500 mL22 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 20 309.271As (Arsenic) 20 193.696Ba (Barium) 20 455.403Be (Beryllium) 20 313.042B (Boron) 20 249.773Cd (Cadmium) 20 226.502Ce (Cerium) 20 413.765Cr (Chromium) 20 205.552Co (Cobalt) 20 238.892Cu (Copper) 20 324.754Fe (Iron) 20 238.204Pb (Lead) 20 220.353Li (Lithium) 20 670.786Mn (Manganese) 20 257.610Ni (Nickel) 20 231.604P (Phosphorus) 20 213.618K (Potassium) 500 766.461Se (Selenium) 20 196.026Ag (Silver) 7.5 328.068Tl (Thallium) 20 190.864V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

Instrument Fortifying Standardfor SolidsM-200.7-LFSS-01S-1 $ 200 / 100 mLM-200.7-LFSS-01S-5 $ 390 / 500 mL24 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 20 193.696Ba (Barium) 20 455.403Be (Beryllium) 20 313.042B (Boron) 20 249.773Cd (Cadmium) 20 226.502Ca (Calcium) 20 315.887Ce (Cerium) 20 413.765Cr (Chromium) 20 205.552Co (Cobalt) 20 238.892Cu (Copper) 20 324.754Pb (Lead) 20 220.353Li (Lithium) 20 670.786Mg (Magnesium) 20 279.553Mn (Manganese) 20 257.610Ni (Nickel) 20 231.604P (Phosphorus) 20 213.618K (Potassium) 500 766.461Se (Selenium) 20 196.026Ag (Silver) 7.5 328.068Na (Sodium) 20 589.995Sr (Strontium) 20 407.771Tl (Thallium) 20 190.864V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

These Standards have been split for stability and ease of use. Chose the Instrument Fortifying Standard you require for Part 1 & use with Part 2 tocomplete the analyte list. For Lab Fortified Blank use M-200.7-LFSS-01, for Water Samples use M-200.7-LFSS-01W, and for Solid Samples use M-200.7-LFSS-01S.

Part 1

Part 2

Method 200.7 Fortifying (Spiking & Instrument Performance Standards)

Instrument Performance Standards

Element µg/mL λ (nm)Al (Aluminum) 20 308.215As (Arsenic) 20 193.696Ba (Barium) 20 493.409Be (Beryllium) 20 313.042B (Boron) 20 249.678Cd (Cadmium) 20 226.502Ca (Calcium) 20 315.887Ce (Cerium) 20 413.765Cr (Chromium) 20 205.552Co (Cobalt) 20 228.616Cu (Copper) 20 324.754Fe (Iron) 20 259.940Pb (Lead) 20 220.353

Instrument Performance Check Standard #1M-200.7-IPC-01-1 $ 210 / 100 mLM-200.7-IPC-01-5 $ 430 / 500 mL26 components in 5% HNO3

Instrument Performance CheckStandard #2M-200.7-IPC-02-1 $ 70 / 100 mLM-200.7-IPC-02-5 $ 135 / 500 mL5 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Sb (Antimony) 20 217.581Mo (Molybdenum) 20 202.030Si (Silicon) † 100 251.611Sn (Tin) 20 189.980Ti (Titanium) 20 334.941

† 214 µg/mL as SiO2

Element µg/mL λ (nm)Li (Lithium) 20 670.786Mg (Magnesium) 20 279.553Mn (Manganese) 20 257.610Ni (Nickel) 20 231.604P (Phosphorus) 100 213.618K (Potassium) 100 766.461Se (Selenium) 20 196.026Ag (Silver) 2.5 328.068Na (Sodium) 20 589.995Sr (Strontium) 20 407.771Tl (Thallium) 20 190.864V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

Method

200.7

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 43: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 37

ICP Method 6010

Interference Check Standard #4INT-04-1 $ 66 / 100 mLINT-04-5 $ 128 / 500 mL5 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 1200 396.152Ca (Calcium) 6000 317.933Fe (Iron) 5000 259.940Mg (Magnesium) 3000 279.553Na (Sodium) 1000 589.592

Interference Check Standard #3INT-03-1 * $ 34 / 100 mLINT-03-5 * $ 67 / 500 mL1 component in H2O tr. HNO3, tr. Tartaric acid

Element µg/mL λ (nm)Sb (Antimony) 500 217.581

Interference Check Standard #2INT-02-1 $ 85 / 100 mLINT-02-5 $ 165 / 500 mL4 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)B (Boron) 500 249.773Mo (Molybdenum) 300 202.030Si (Silicon) 200 251.611Ti (Titanium) 1000 334.941

Interference Check Standards SetsFor SW-846 Method 6010 (Rev. 0, 9/86)

INT-1986-5-SET $ 665 / 4 x 500 mL

Interference Check Standard #1INT-01-1 $ 242 / 100 mLINT-01-5 $ 472 / 500 mL17 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 1000 189.042Ba (Barium) 300 233.527Be (Beryllium) 100 313.042Cd (Cadmium) 300 214.438Cr (Chromium) 300 205.552Co (Cobalt) 300 228.616Cu (Copper) 300 324.754Pb (Lead) 1000 220.353Mn (Manganese) 200 257.610Hg (Mercury) 50 194.232Ni (Nickel) 300 231.604K (Potassium) 20,000 766.490Se (Selenium) 500 196.090Ag (Silver) 300 328.068Tl (Thallium) 1000 351.924V (Vanadium) 300 292.402Zn (Zinc) 300 213.856

Four standard mixtures are available for interference checks in SW-846, Method 6010 (Rev. 0, Sept. 1986) and Method 200.7.

INT-01-1INT-02-1

INT-03-1INT-04-1

INT-01-5INT-02-5

INT-03-5INT-04-5

Method 6010 (Revision 0, Sept. 1986) Interference Check Standards

Mixed Calibration Standard #3RMCS-03R-1 $ 55 / 100 mLMCS-03R-5 $ 107 / 500 mL2 components in 2% HNO3 tr. HF

Element µg/mL λ (nm)As (Arsenic) 500 189.042Mo (Molybdenum) 100 202.030

Mixed Calibration Standard #4RMCS-04R-1 $ 98 / 100 mLMCS-04R-5 $ 191 / 500 mL8 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 200 396.152Ca (Calcium) 1000 317.933Cr (Chromium) 20 205.552Li (Lithium) 100 670.784Ni (Nickel) 20 231.604K (Potassium) 400 766.490Na (Sodium) 200 589.592Sr (Strontium) 10 407.771

Mixed Calibration Standard #5RMCS-05R-1 $ 76 / 100 mLMCS-05R-5 $ 148 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 200 217.581Mg (Magnesium) 1000 279.553Ag (Silver) 50 328.068Tl (Thallium) 200 351.924

Mixed Calibration Standard #2MCS-02-1 $ 85 / 100 mLMCS-02-5 $ 165 / 500 mL5 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 100 233.527Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 10,000 259.940V (Vanadium) 100 292.402

Mixed Calibration Standard #1MCS-01-1 $ 85 / 100 mLMCS-01-5 $ 165 / 500 mL6 components in 2% HNO3

Element µg/mL λ (nm)Be (Beryllium) 50 313.042Cd (Cadmium) 150 214.438Pb (Lead) 500 220.353Mn (Manganese) 100 220.353Se (Selenium) 200 196.090Zn (Zinc) 150 213.856

Mercury StandardMercury is available in a separate solutiondue to its incompatibility with otherelements.TCLP-02-1 $ 34 / 100 mLTCLP-02-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.227

Complete 6010B, Rev. 2, 1996Calibration Set

MCS-1996-1-SET $ 385 / 7 x 100 mL

MCS-01-1MCS-02-1MCS-03R-1

MCS-06R-1TCLP-02-1

MCS-04R-1MCS-05R-1

MCS-01-5MCS-02-5MCS-03R-5

MCS-04R-5MCS-05R-5

MCS-06R-5TCLP-02-5

MCS-1996-5-SET $ 750 / 7 x 500 mL

Mixed Calibration Standard 6RMCS-06R-1 $ 64 / 100 mLMCS-06R-5 $ 123 / 500 mL5 components in 2-5% HNO3, tr. HF

Element µg/mL λ (nm)P (Phosphorus) 200 213.618Sn (Tin) 200 189.980Ti (Titanium) 100 334.941B (Boron) 50 249.678Si (Silicon) † 100 251.611

† 214 µg/mL as SiO2

Method 6010B (Revision 2, Dec. 1996 from SW-846) Calibration Standards

Technical NoteAdditional Analyte CalibrationStandards. The use of this StandardSolution (MCS-06R), plus a MercuryStandard (TCLP-02), completes theanalyte list for the 1996 Revision 2.

INT-1986-1-SET $ 340 / 4 x 100 mL

ICPM

ethod6010

Page 44: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

38 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICP Method 6010

Method 6010B (Revision 2 from SW-846, Dec. 1996) Performance and Interference Check Standards

Alternate InterferentsCLP-PIN-02-1 $ 98 / 100 mLCLP-PIN-02-5 $ 225 / 500 mL6 components in 5% HNO3

Element µg/mL λ (nm)Cr (Chromium) 1000 205.552Cu (Copper) 1000 324.754Mn (Manganese) 1000 257.610Ni (Nickel) 1000 231.604Ti (Titanium) 1000 334.941V (Vanadium) 1000 292.402

Primary InterferentsCLP-PIN-01-1 $ 110 / 100 mLCLP-PIN-01-5 $ 215 / 500 mL4 components in 5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 5000 396.152Ca (Calcium) 5000 317.933Fe (Iron) 2000 259.940Mg (Magnesium) 5000 297.553

Interference SetBecause Interference problems aredependent on the types of sample matricesencountered - it is often easier to createyour own set of matrix matching interferencecheck solutions. Therefore, we are offeringa set of single element solutions to be usedfor that purpose.

SIC-SING-R-1-SET $300 / set of 10 x 100 mLSingle Elements in HNO3 @ 1,000 ppm

Al (Aluminum) ICP-01N-1Ca (Calcium) ICP-09N-1Cr (Chromium) ICP-13N-1Cu (Copper) ICP-15N-1Fe (Iron) ICP-27N-1Mg (Magnesium) ICP-32N-1Mn (Manganese) ICP-33N-1Ni (Nickel) ICP-37N-1Ti (Titanium) ICP-64W-1V (Vanadium) ICP-67N-1

If you would like us to formulatean interference check solution tomeet your needs, please call ourTechnical Service Department fora custom quotation.

Laboratory Performance CheckStandardLPCS-01R-1 $ 230 / 100 mLLPCS-01R-5 $ 450 / 500 mL30 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 20 308.215Sb (Antimony) 20 217.581As (Arsenic) 20 193.696Ba (Barium) 20 493.409Be (Beryllium) 20 313.042B (Boron) 20 249.678Cd (Cadmium) 20 226.502Ca (Calcium) 20 315.887Cr (Chromium) 20 205.552Co (Cobalt) 20 228.616Cu (Copper) 20 324.754Fe (Iron) 20 259.940Pb (Lead) 20 220.353Li (Lithium) 20 670.786Mg (Magnesium) 20 279.079Mn (Manganese) 20 257.610Mo (Molybdenum) 20 203.844Ni (Nickel) 20 231.604P (Phosphorous) 100 213.618K (Potassium) 100 766.490Se (Selenium) 20 196.090Si (Silicon) † 100 251.611Ag (Silver) 5 328.068Na (Sodium) 20 588.595Sr (Strontium) 20 421.552Tl (Thallium) 20 190.864Sn (Tin) 20 189.980Ti (Titanium) 20 334.941V (Vanadium) 20 292.402Zn (Zinc) 20 213.856

† 214 µg/mL as SiO2

Set-up SolutionsNebulizer Adjustment Solution(Yttrium)ICP-69N-1 $ 34 / 100 mLY at 1000 µg/mL in HNO3

Spiking Standard #2QCS-02-1 $ 89 / 100 mLQCS-02-5 $ 174 / 500 mL7 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 100 493.409B (Boron) 100 249.678K (Potassium) 1000 766.491Si (Silicon) † 500 251.611Ag (Silver) 50 328.068Na (Sodium) 100 588.995

† 1070 µg/mL as SiO2

Spiking Standard #1QCS-01-1 $ 182 / 100 mLQCS-01-5 $ 354 / 500 mL23 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Be (Beryllium) 100 313.042Cd (Cadmium) 100 226.502Ca (Calcium) 100 315.887Cr (Chromium) 100 205.552Co (Cobalt) 100 228.616Cu (Copper) 100 324.754Fe (Iron) 100 259.940Pb (Lead) 100 220.353Li (Lithium) 100 670.784Mg (Magnesium) 100 279.079Mn (Manganese) 100 257.610Mo (Molybdenum) 100 203.844Ni (Nickel) 100 231.604P (Phosphorus) 100 214.914Se (Selenium) 100 196.090Sr (Strontium) 100 421.552Tl (Thallium) 100 190.864Sn (Tin) 100 189.980Ti (Titanium) 100 334.941V (Vanadium) 100 292.402Zn (Zinc) 100 213.856

Three convenient solutions that can be used for spiking samples pre- or post- digestion.

QC Standard #2RQCS-02-R1-1 $ 89 / 100 mLQCS-02-R1-5 $ 174 / 500 mL7 components in 5% HNO3 tr. HF

Element µg/mL λ (nm)Al (Aluminum) 100 308.215Ba (Barium) 100 493.409B (Boron) 100 249.678K (Potassium) 100 766.491Si (Silicon) † 100 251.611Ag (Silver) 100 328.068Na (Sodium) 100 588.995

† 214 µg/mL as SiO2

Mercury StandardMercury is available in a separate solutiondue to incompatibility with other elements.TCLP-02-1 $ 34 / 100 mLTCLP-02-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.227

Method 6010B Spiking Standards

Technical NoteThree convenient solutions that can beused for spiking samples pre- or post-digestion.

ICPM

ethod6010B

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 45: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 39

TCLP

TCLP Standard #1TCLP-01-1 $ 98 / 100 mLTCLP-01-5 $ 190 / 500 mL7 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 25 189.042Ba (Barium) 500 233.527Cd (Cadmium) 5 214.438Cr (Chromium) 25 205.552Pb (Lead) 25 220.353Se (Selenium) 5 196.090Ag (Silver) 25 328.068

TCLP Standard for ICPTCLP-ICP-1 $ 68 / 100 mLTCLP-ICP-5 $ 132 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Ba (Barium) 500 233.527Cd (Cadmium) 5 214.438Cr (Chromium) 25 205.552Ag (Silver) 25 328.068

TCLP Standard for GFAATCLP-GFAA-1 $ 50 / 100 mLTCLP-GFAA-5 $ 110 / 500 mL3 components in 5% HNO3

Element µg/mL λ (nm)As (Arsenic) 25 189.042Pb (Lead) 25 220.353Se (Selenium) 5 196.090

TCLP Standard #2For Mercury Analysis using ICP or Cold Vapor AATCLP-02-1 $ 34 / 100 mLTCLP-02-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.232

For use in SW-846, Method 1311 Toxicity Characteristic Leaching Procedure

TCLP Multi-Element Calibration Standards

TCLP

Custom StandardsWhen you have a need for unique Analytical Standards,let the experts at AccuStandard assist in designing yourformulation. Our technical group, with over 80 years ofcombined analytical experience, will review your request,suggest the most economical and stable formulation, andprovide pricing all within 24 hours.

For a Quick Quote, copy the custom quote form in theback of catalog and fax it back. We will get right back toyou.

Plus we typically ship within one week after order receipt.

Page 46: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

40 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

SDWA

Primary Metals for Analysis byICPContains all approved elementsSDWA-04-1 $ 95 / 100 mLSDWA-04-5 $ 185 / 500 mL9 components in 2-5% HNO3

Element µg/mL λ (nm)As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Ni (Nickel) 10 231.604Na (Sodium) 100 588.995

Primary Metals for Analysis byICP-MSContains all approved elementsSDWA-06-MS-1 $ 115 / 100 mLSDWA-06-MS-5 $ 225 / 500 mL11 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 10 206.833As (Arsenic) 10 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Tl (Thallium) 10 190.864

Secondary Metals for Analysisby GFAA / ICP / ICP-MSSDWA-08-1 $ 75 / 100 mLSDWA-08-5 $ 146 / 500 mL5 components in 2-5% HNO3

Element µg/mL λ (nm)Al (Aluminum) 10 308.215Fe (Iron) 100 259.940Mn (Manganese) 10 257.610Ag (Silver) 10 328.068Zn (Zinc) 10 213.856

Primary Metals for Analysis byGFAAContains GFAA approved elementsSDWA-05-1 $ 95 / 100 mLSDWA-05-5 $ 185 / 500 mL9 components in 2-5% HNO3

Element µg/mL λ (nm)Sb (Antimony) 10 206.833As (Arsenic) 10 193.696Cd (Cadmium) 10 226.502Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Tl (Thallium) 10 190.864

Primary & Secondary Metals forAnalysis by GFAA/ICP/ICP-MSContains all Primary & Secondary MetalsSDWA-09-1 $ 195 / 100 mLSDWA-09-5 $ 370 / 500 mL19 components in 2% HNO3

Element µg/mL λ (nm)Al (Aluminum) 10 308.215Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Fe (Iron) 100 259.940Pb (Lead) 10 220.353Mn (Manganese) 10 257.610Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Si (Silicon) † 100 251.611Ag (Silver) 10 328.068Na (Sodium) 100 588.995Tl (Thallium) 10 190.864Zn (Zinc) 10 213.856

† 214 µg/mL as SiO2

Primary Metals for Analysis byGFAA / ICP / ICP-MSSDWA-07-1 $ 135 / 100 mLSDWA-07-5 $ 264 / 500 mL14 components in 2% HNO3

Element µg/mL λ (nm)Sb (Antimony) 100 206.833As (Arsenic) 100 193.696Ba (Barium) 10 493.409Be (Beryllium) 10 313.042Cd (Cadmium) 10 226.502Ca (Calcium) 100 317.933Cr (Chromium) 10 205.552Cu (Copper) 10 324.754Pb (Lead) 10 220.353Ni (Nickel) 10 231.604Se (Selenium) 10 196.090Si (Silicon) † 100 251.611Na (Sodium) 100 588.995Tl (Thallium) 10 190.864

† 214 µg/mL as SiO2

SDWA Standards

For use in SW-846, Method 1310 and U.S. NPDWR 40CFR Part 141. The three Drinking Water Standards are used for monitoring drinking waterand/or ground and surface water.

Primary Drinking Water MetalsSDWA-01-1 $ 85 / 100 mLSDWA-01-5 $ 165 / 500 mL7 components in 2% HNO3

Element µg/mL λ (nm)As (Arsenic) 10 193.696Ba (Barium) 100 493.409Cd (Cadmium) 5 226.502Cr (Chromium) 10 205.552Pb (Lead) 10 220.353Se (Selenium) 5 196.090Ag (Silver) 10 328.068

Secondary Drinking WaterMetalsSDWA-02-1 $ 72 / 100 mLSDWA-02-5 $ 139 / 500 mL4 components in 2% HNO3

Element µg/mL λ (nm)Cu (Copper) 100 324.754Fe (Iron) 30 259.940Mn (Manganese) 5 257.610Zn (Zinc) 500 213.856

Mercury SolutionSDWA-03-1 $ 34 / 100 mLSDWA-03-5 $ 67 / 500 mL1 component in 5% HNO3

Element µg/mL λ (nm)Hg (Mercury) 20 194.232

Set of Drinking Water Standards

SDWA-01-1 SDWA-02-1 SDWA-03-1

SDWA-1-SET $ 154 / 3 x 100 mL

Standards for Analytes covered in the Safe Drinking Water Act (SDWA)

SDWA-01-5 SDWA-02-5 SDWA-03-5

SDWA-5-SET $ 298 / 3 x 500 mL

SDWA

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 47: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 41

ICP/MS

Multi-Elem

ent

Calibration Standard 2ICP-MS-CAL2-1 $ 180 / 100 mL29 components in 5% HNO3

Most Abundant Element µg/mL IsotopeAl (Aluminum) 10 27As (Arsenic) 10 75Ba (Barium) 10 138Be (Beryllium) 10 9Bi (Bismuth) 10 209Cd (Cadmium) 10 114Ca (Calcium) 10 40Cs (Cesium) 10 133Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Ga (Gallium) 10 69In (Indium) 10 115Fe (Iron) 10 56Pb (Lead) 10 208Li (Lithium) 10 7Mg (Magnesium) 10 24Mn (Manganese) 10 55Ni (Nickel) 10 58K (Potassium) 10 39Rb (Rubidium) 10 85Se (Selenium) 10 80Ag (Silver) 10 107Na (Sodium) 10 23Sr (Strontium) 10 88Tl (Thallium) 10 205U (Uranium) 10 238V (Vanadium) 10 51Zn (Zinc) 10 64

Calibration Standard 4ICP-MS-CAL4-1 * $ 95 / 100 mL12 components in H2O trace HF

Most Abundant Element µg/mL IsotopeB (Boron) 10 11Ge (Germanium) 10 74Mo (Molybdenum) 10 98Nb (Niobium) 10 93P (Phosphorous) 10 31Re (Rhenium) 10 187Si (Silicon) 10 28S (Sulphur) 10 32Ta (Tantalum) 10 181Ti (Titanium) 10 48W (Tungsten) 10 184Zr (Zirconium) 10 90

Calibration Standard 3ICP-MS-CAL3-1 $ 80 / 100 mL10 components in 10% HCl

Most Abundant Element µg/mL IsotopeSb (Antimony) 10 121Au (Gold) 10 197Hf (Hafnium) 10 180Ir (Iridium) 10 193Pd (Palladium) 10 106Pt (Platinum) 10 195Rh (Rhodium) 10 103Ru (Ruthenium) 10 102Te (Tellurium) 10 130Sn (Tin) 10 120

Calibration Standard 5ICP-MS-CAL5-1 $ 30 / 100 mL1 component in 5% HNO3

Most Abundant Element µg/mL IsotopeHg (Mercury) 10 202

Calibration Standard SetICP-MS-CAL-1-SET $ 390 / 5 x 100 mL

Calibration Standard 1ICP-MS-CAL1-1 $ 110 / 100 mL17 components in 5% HNO3

Most Abundant Element µg/mL IsotopeCe (Cerium) 10 140Dy (Dysprosium) 10 164Er (Erbium) 10 166Eu (Europium) 10 153Gd (Gadolinium) 10 158Ho (Holmium) 10 165La (Lanthanum) 10 139Lu (Lutetium) 10 175Nd (Neodymium) 10 143Pr (Praseodymium) 10 141Sm (Samarium) 10 152Sc (Scandium) 10 45Tb (Terbium) 10 159Th (Thorium) 10 232Tm (Thulium) 10 169Yb (Ytterbium) 10 174Y (Yttrium) 10 89

ICP-MS-CAL1-1ICP-MS-CAL2-1ICP-MS-CAL3-1

ICP-MS-CAL4-1ICP-MS-CAL5-1

These five standards encompass the entire range of elements all at 10 ppm.

Nitric Acid BlankICP-MS-BLN-1 $ 30 / 100 mLICP-MS-BLN-5 $ 45 / 500 mL

5% HNO3 in ASTM Type I Water

Water BlankICP-MS-BLW-1 * $ 30 / 100 mLICP-MS-BLW-5 * $ 40 / 500 mL

ASTM Type I Water

Hydrochloric Acid BlankICP-MS-BLH-1 $ 30 / 100 mLICP-MS-BLH-5 $ 45 / 500 mL

5% HCl in ASTM Type I Water

These blanks are prepared from the samewater source and acids as your standardsand therefore provide a consistent matrix.They are excellent as a blank, preparing astandard curve, or as a diluent forstandards and samples.

ICP/MS Multi-Element Standards

AccuStandard’s ICP/MS Standards are formulated to meet the needs of this very special instrument. As matrix effect is of utmost concern eachstandard is formulated in specially purified de-ionized 18 megohm water and Parts per Trillion acids; after both wet chemical and instrumentalanalysis, the standards are packaged in acid leached FLPE containers to provide required protection and, of course, all standards are traceable tothe National Institute of Standards and Technology (NIST) weights and Reference Materials.

Ultra Pure Matrix Special Packaging Traceability to National Reference Materials

ICP/MS Calibration Standards

ICP/MS Matrix Blanks

Page 48: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

42 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICP-MS-TUNSOL2-1 $ 165 / 100 mL13 components in 2% HNO3

Most Abundant Element µg/mL IsotopeBa (Barium) 100 138Be (Beryllium) 100 9Bi (Bismuth) 100 209Ce (Cerium) 100 140Cu (Copper) 100 63Ho (Holmium) 100 165In (Indium) 100 115Pb (Lead) 100 208Li (Lithium) 100 7Mg (Magnesium) 100 24Tl (Thallium) 100 205U (Uranium) 100 238Y (Yttrium) 100 89

Solution AICP-MS-MEMCHKA1-R1 100 mL24 components in 2% HNO3

Most Abundant Element µg/mL IsotopeAl (Aluminum) 1000 27Sb (Antimony) 20 121As (Arsenic) 20 75Ba (Barium) 20 138Be (Beryllium) 20 9Cd (Cadmium) 20 114Ca (Calcium) 1000 40C (Carbon) 2000 12Cr (Chromium) 20 52Co (Cobalt) 20 59Cu (Copper) 20 63Fe (Iron) 1000 56Pb (Lead) 20 208Mg (Magnesium) 1000 24Mo (Molybdenum) 20 98K (Potassium) 1000 39Ti (Titanium) 20 48Mn (Manganese) 20 55Ni (Nickel) 20 58Se (Selenium) 20 80Na (Sodium) 1000 23Tl (Thallium) 20 205V (Vanadium) 20 51Zn (Zinc) 20 64

Solution BICP-MS-MEMCHKB-R1 * $ 60 / 100 mL3 components in H2O

Most Abundant Element µg/mL IsotopeCl (Chloride) 7200 35P (Phosphorous) 1000 31S (Sulphur) 1000 32

Memory Check Solution SetICP-MS-MEMCHK-R1-SET

$ 250 / 3 x 100 mLICP-MS-MEMCHKA1-R1ICP-MS-MEMCHKA2-R1ICP-MS-MEMCHKB-R1

Solution BICP-MS-INTB-1 $ 95 / 100 mL11 components in 2% HNO3

Most Abundant Element µg/mL IsotopeAs (Arsenic) 10 75Cd (Cadmium) 10 114C (Carbon) 20 12Cr (Chromium) 20 52Cu (Copper) 20 63Mn (Manganese) 20 55Ni (Nickel) 20 58Se (Selenium) 10 80Ag (Silver) 20 107V (Vanadium) 20 51Zn (Zinc) 10 64

Interference Check StandardSetICP-MS-INT-1-SET $ 350 / 2 x 100 mL

ICP-MS-INTA-1 ICP-MS-INTB-1

Solution AICP-MS-INTA-1 $ 310 / 100 mL12 components in 1% HNO3

Most Abundant Element µg/mL IsotopeAl (Aluminum) 1000 27C (Carbon) 2000 12Ca (Calcium) 3000 40Cl (Chloride) 18000 35Fe (Iron) 2500 56Mg (Magnesium) 1000 24Mo (Molybdenum) 20 98P (Phosphorous) 1000 31K (Potassium) 1000 39Na (Sodium) 2500 23S (Sulphur) 1000 32Ti (Titanium) 20 48

The below MEMCHK Solutions are notdesigned to be used as standards. Thesolutions should be mixed together rightbefore aspiration. Precipitate will form overtime - this is normal and will not affect theperformance of the solution. The mixture isused only to determine the memory or"carry-over" that occurs after running a"concentrated" solution.

ICP-MS-MEMCHKA2-R1 100 mLIn 2% HNO3

Most Abundant Element µg/mL Isotope

Ag (Silver) 20 107

We offer two tuning solutions, both range from 7-238 mass units. Choose theone which best suits your needs.

ICP-MS-TUNSOL1-1 $ 100 / 100 mL8 components in 2% HNO3

Most Abundant Element µg/mL IsotopeBa (Barium) 100 138Be (Beryllium) 100 9Cu (Copper) 100 63In (Indium) 100 115Li (Lithium) 100 7Mg (Magnesium) 100 24Tl (Thallium) 100 205U (Uranium) 100 238

Solution SetICP-MS-MEMCHKA-R1-SET $215/ 2x100mL

ICP-MS-MEMCHKA1-R1ICP-MS-MEMCHKA2-R1

ICP/MS Multi-Element Standards

Tuning Solutions

ICP/MS

Multi-Elem

ent

Interference Check Standards Memory Check Solution

e-Standards™

Just a click away

AccuStandard.comThis is the easier way to get

Chemical Reference Standards

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 49: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

For Certificate of Analysis and MSDSs visit our website at www.AccuStandard.com 43

Sample 2ICP-MS-QC2-1 $ 170 / 100 mL25 components in 5% HNO3

Most Abundant Element µg/mL IsotopeAl (Aluminum) 10 27Sb (Antimony) 10 121As (Arsenic) 10 75Ba (Barium) 10 138Be (Beryllium) 10 9Cd (Cadmium) 10 114Ca (Calcium) 10 40Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Fe (Iron) 10 56Pb (Lead) 10 208Mg (Magnesium) 10 24Mn (Manganese) 10 55Mo (Molybdenum) 10 98Ni (Nickel) 10 56K (Potassium) 10 39Se (Selenium) 10 80Ag (Silver) 10 107Na (Sodium) 10 23Tl (Thallium) 10 205Th (Thorium) 10 232U (Uranium) 10 238V (Vanadium) 10 51Zn (Zinc) 10 64

Sample 3ICP-MS-QC3-1 $ 250 / 100 mL21 components in 5% HNO3

Most Abundant Element µg/mL IsotopeSb (Antimony) 10 121As (Arsenic) 10 75Be (Beryllium) 10 9Cd (Cadmium) 10 114Ca (Calcium) 10 40Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Fe (Iron) 10 56Pb (Lead) 10 208Li (Lithium) 10 7Mg (Magnesium) 10 24Mn (Manganese) 10 55Mo (Molybdenum) 10 98Ni (Nickel) 10 58Se (Selenium) 10 80Sr (Strontium) 10 88Tl (Thallium) 10 205Ti (Titanium) 10 48V (Vanadium) 10 51Zn (Zinc) 10 64

ICP-MS-SPIKE-S-1 $ 100 / 100 mL15 components in 5% HNO3

Most Abundant Element µg/mL IsotopeSb (Antimony) 100 121As (Arsenic) 50 75Ba (Barium) 250 138Be (Beryllium) 25 9Cd (Cadmium) 50 114Cr (Chromium) 250 52Co (Cobalt) 100 59Cu (Copper) 250 63Pb (Lead) 100 208Ni (Nickel) 125 58Se (Selenium) 25 80Ag (Silver) 25 107Tl (Thallium) 25 205V (Vanadium) 150 51Zn (Zinc) 250 90

Spiking Standard Set

ICP-MS-SPIKE-1-SET $ 165 / 2 x 100 mL

ICP-MS-SPIKE-W-1 ICP-MS-SPIKE-S-1

Internal Standard MixThese internal standards have been chosenbecause they all have nearly 100%abundance of a single isotope and they arenot commonly found in routine samples.

ICP-MS-IS-MIX1-1 $ 70 / 100 mL7 components in 2% HNO3

Most Abundant Element µg/mL IsotopeBi (Bismuth) 10 209Ho (Holmium) 10 165In (Indium) 10 1156-Li (Lithium-6) 10 6Sc (Scandium) 10 45Tb (Terbium) 10 159Y (Yttrium) 10 89

Element Matrix Unit 10 µg/mL 100 µg/mLBismuth 5% HNO 100 mL ICP-MS-IS-BI-1 $ 30 ICP-MS-IS-BI-1-10X $ 35Indium 5% HNO3 100 mL ICP-MS-IS-IN-1 30 ICP-MS-IS-IN-1-10X 35Rhodium 10% HCl 100 mL ICP-MS-IS-RH-1 95 ICP-MS-IS-RH-1-10X 100Scandium 5% HNO3 100 mL ICP-MS-IS-SC-1 55 ICP-MS-IS-SC-1-10X 60Terbium 5% HNO3 100 mL ICP-MS-IS-TB-1 30 ICP-MS-IS-TB-1-10X 35Yttrium 5% HNO3 100 mL ICP-MS-IS-Y-1 30 ICP-MS-IS-Y-1-10X 35

For convenience we offer two concentrations - You decide which is most convenient.

Single Internal Standards

Spiking Standards for Water andSoilICP-MS-SPIKE-W-1 $ 130 / 100 mL17 components in 5% HNO3

Most Abundant Element µg/mL IsotopeSb (Antimony) 100 121As (Arsenic) 50 75Ba (Barium) 250 138Be (Beryllium) 25 9Cd (Cadmium) 25 114Cr (Chromium) 100 52Co (Cobalt) 100 59Cu (Copper) 100 63Fe (Iron) 500 56Pb (Lead) 50 208Mn (Manganese) 100 55Ni (Nickel) 100 58Se (Selenium) 25 80Ag (Silver) 25 107Tl (Thallium) 25 205V (Vanadium) 100 51Zn (Zinc) 250 64

Sample 1ICP-MS-QC1-1 $ 63 / 100 mL9 components in 2% HNO3

Most Abundant Element µg/mL IsotopeBe (Beryllium) 10 9Bi (Bismuth) 10 209Ce (Cerium) 10 140Co (Cobalt) 10 59In (Indium) 10 115Pb (Lead) 10 208Mg (Magnesium) 10 24Ni (Nickel) 10 58U (Uranium) 10 238

Quality Control Samples

ICP/MS Multi-Element Standards

ICP/MS Standards

ICP/MS

Multi-Elem

ent

Page 50: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

44 AccuStandard's Quality System is Certified to Comply with International ISO 9001 & ISO 17025

ICP/MSEPA Method 200.8 & 6020

Calibration StandardICP-MS-6020-CAL-1 $ 125 / 100 mL15 components in 2% HNO3

Most AbundantElement µg/mL IsotopeAl (Aluminum) 10 27Sb (Antimony) 10 121As (Arsenic) 10 75Ba (Barium) 10 138Be (Beryllium) 10 9Cd (Cadmium) 10 114Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Pb (Lead) 10 208Mn (Manganese) 10 55Ni (Nickel) 10 58Ag (Silver) 10 107Tl (Thallium) 10 205Zn (Zinc) 10 64

Interference Check Standard #1ICP-MS-6020-INT1-1 $ 310 / 100 mL12 components in 2% HNO3

Most AbundantElement µg/mL IsotopeAl (Aluminum) 1000 27Cl (Chloride) 10000 35Ca (Calcium) 1000 40C (Carbon) 2000 12Fe (Iron) 1000 56Mg (Magnesium) 1000 24Mo (Molybdenum) 20 98P (Phosphorous) 1000 31K (Potassium) 1000 39Na (Sodium) 1000 23S (Sulfur) 1000 32Ti (Titanium) 20 48

Internal StandardICP-MS-IS-MIX1-1 $ 70 / 100 mL7 components in 2% HNO3

Most AbundantElement µg/mL IsotopeBi (Bismuth) 10 209Ho (Holmium) 10 165In (Indium) 10 115Li (Lithium-6) 10 6Sc (Scandium) 10 45Tb (Terbium) 10 159Y (Yttrium) 10 89

Interference Check Standard #2ICP-MS-6020-INT2-1 $ 75 / 100 mL9 components in 5% HNO3 tr. HF

Most AbundantElement µg/mL IsotopeAs (Arsenic) 2 75Cd (Cadmium) 2 114Cr (Chromium) 2 52Co (Cobalt) 2 59Cu (Copper) 2 63Mn (Manganese) 2 55Ni (Nickel) 2 58Ag (Silver) 2 107Zn (Zinc) 2 64

Tuning StandardICP-MS-6020-TUN-1 $ 75 / 100 mL4 components in 2% HNO3

Most AbundantElement µg/mL IsotopeCo (Cobalt) 10 59In (Indium) 10 115Li (Lithium) 10 7Tl (Thallium) 10 205

Method 6020 (Revision 0, Sept. 1991) Standards for Inductively Coupled Mass Spectrometry

Calibration Standard #1R(1994 Version)ICP-MS-200.8-CAL1R-1 $ 120 / 100 mL18 components in 2% HNO3 tr. HF

Most AbundantElement µg/mL IsotopeAl (Aluminum) 10 27Sb (Antimony) 10 121As (Arsenic) 10 75Be (Beryllium) 10 9Cd (Cadmium) 10 114Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Pb (Lead) 10 208Mn (Manganese) 10 55Mo (Molybdenum) 10 98Ni (Nickel) 10 58Se (Selenium) 50 80Tl (Thallium) 10 205Th (Thorium) 10 232U (Uranium) 10 238V (Vanadium) 10 51Zn (Zinc) 10 64

Calibration Standard #3ICP-MS-200.8-CAL3-1 $ 30 / 100 mL1 component in 5% HNO3

Most AbundantElement µg/mL IsotopeHg (Mercury) 5 202

Internal Standard #1ICP-MS-200.8-IS-1 $ 135 / 100 mL5 components in 2% HNO3

Most AbundantElement µg/mL IsotopeSc (Scandium) 100 45Y (Yttrium) 100 89In (Indium) 100 115Tb (Terbium) 100 159Bi (Bismuth) 100 209

Tuning StandardICP-MS-200.8-TUN-1 $ 70 / 100 mL5 components in 2% HNO3

Most AbundantElement µg/mL IsotopeBe (Beryllium) 10 75Mg (Magnesium) 10 24Co (Cobalt) 10 59In (Indium) 10 115Pb (Lead) 10 208

Calibration Standard #1(1991 Version)ICP-MS-200.8-CAL1-1 $ 120 / 100 mL18 components in 5% HNO3 tr. HF

Most AbundantElement µg/mL IsotopeAl (Aluminum) 10 27Sb (Antimony) 10 121As (Arsenic) 10 75Be (Beryllium) 10 9Cd (Cadmium) 10 114Cr (Chromium) 10 52Co (Cobalt) 10 59Cu (Copper) 10 63Pb (Lead) 10 208Mn (Manganese) 10 55Mo (Molybdenum) 10 98Ni (Nickel) 10 58Se (Selenium) 10 80Tl (Thallium) 10 205Th (Thorium) 10 232U (Uranium) 10 238V (Vanadium) 10 51Zn (Zinc) 10 64

Internal Standards

Calibration Standard #2ICP-MS-200.8-CAL2-1 $ 75 / 100 mL2 components in 2% HNO3 tr. HF

Most AbundantElement µg/mL IsotopeBa (Barium) 10 138Ag (Silver) 10 67

Internal Standard #2ICP-MS-200.8-IS2-1 $ 75 / 100 mL1 component in 2% HNO3

Most AbundantElement µg/mL IsotopeAu (Gold) 100 197

Calibration Standards

Method 200.8 Determination of Trace Elements in Water and Waste by ICP/MS

Method

200.8&

6020

These products require a Hazardous Shipping Fee except products marked with an asterisk *

Page 51: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 4545

Petrochemical StandardsCertified Petroleum Reference Materials (CPRM)

ASTM Methods for Organometallics, Aromatics, Olefins, Saturates, Sulfur, Nitrogen & Oxygenates in Refinery Products

Table of Contents page

Wear Metals 46-52

Organometallic Wear Metals Single and Multi-Element 46

Organometallic Single Element Concentrates & Stock Solutions Sulfur Free 47

Stabilization Solutions 47, 52

Wear Metals Multi-Element Sulfur Free 48

Sulfur & Metals in Oil 49

ISO / CD 14597 Vanadium & Nickel in Oil 49

Lubricating Oil Standards 50-52

Metal Working Fluids 52

Sulfur Standards 53-55

Sulfur in Mineral Oil 53

Sulfur in Diesel Fuel 53

Sulfur in Kerosene, Refinery Oils & Aromatics 54

Sulfur in Isooctane for Gasoline Analysis (D-2622, D-4294, D-3120, D-3246) 55

Petroleum QC Standards 56

ASTM Methods

D-3230 Salts in Crude Oil 57

D-3231 Phosphorus in Gasoline 57

D-3237 Lead in Gasoline 57

D-3605 Trace Metals in Gas Turbine Fuels 57

D-3610 Cobalt Oxide Standard 57

D-3831 Manganese in Gasoline 57

D-4628 Barium, Calcium, Magnesium & Zinc in unused Lubricating Oil 57

D-4629 Nitrogen in Petroleum Hydrocarbons 58

D-4927 Wear Metals in Lubricating Oil 59

D-4929 Organic Chlorides in Crude Oil 59

D-4951 Additive Elements in Lubricating Oil 59

D-5056 Trace Metals in Petroleum Coke 59

D-5059 Lead in Gasoline 60

D-5184 Aluminum & Silicon in Fuel Oils 60

D-5185 Additive Elements, Wear Metals & Contaminants in used Lubricating Oils 60

D-5453 Sulfur in Light Hydrocarbons, Motor Fuels & Oils 61

D-5600 Trace Metals in Petroleum Coke 61

D-5708 Nickel, Vanadium & Iron in Crude Oils & Residual Fuels 62

D-5762 Nitrogen in Petroleum & Petroleum Products 63

D-5863 Nickel, Vanadium, Iron & Sodium in Crude Oils & Residual Fuels 63

Petrochemical&

ASTM

For our complete line of standardsfor over 100 ASTM Methods,request our Petroleum catalog.

Looking for a methodnumber you can’t find inthe Index or Table ofContents?

There are more on ourWebsite.

MEMBER

Page 52: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702546

Traceable Organometallic Standards forAA, ICP, DCP & XRF Analysis

These Standards were formulated for the analysis of metals in oils and other organic matrices. These Standards and curves provide a convenientway to analyze for metals (wear metals, additives and contaminants) in lubricating oils, gasolines, residual oils, crude oils, turbine fuels andenvironmental samples. All standards undergo rigorous quality assurance checks. Major constituents in the final Standard are typically analyzed byboth plasma emission and rotrode techniques. Organometallic Standards listed on this page may contain sulfur which can be introduced by possiblesulfonate starting materials used to formulate the actual organometallic standard. We developed a Premium Organometallic line for preferring tohave organometallic standards with <1 ppm sulfur or phosphorous (see Table of Contents).

Single & Multi Element StandardsPrepared Calibration CurvesFormulated from Ultra High PurityOrganometallic Starting materials &matricesCertificate of Analysis

Organometallic ICP/XRF 1000 µg/g in 20 cSt base oil 5000 µg/g in 75 cSt base oilElement Unit Cat. No. Price Cat. No. PriceAluminum 2 oz WM-20CST-01 $ 32 WM-75CST-01-5X $ 45Antimony 2 oz WM-20CST-02 32 WM-75CST-02-5X 45Arsenic 2 oz WM-20CST-03 40 --------------- ----Barium 2 oz WM-20CST-04 32 WM-75CST-04-5X 45Beryllium NEW 2 oz WM-20CST-05 40 --------------- ----Bismuth 2 oz WM-20CST-06 32 WM-75CST-06-5X 45Boron 2 oz WM-20CST-07 32 WM-75CST-07-5X 45Cadmium 2 oz WM-20CST-08 32 WM-75CST-08-5X 45Calcium 2 oz WM-20CST-09 32 WM-75CST-09-5X 45Chromium 2 oz WM-20CST-13 32 WM-75CST-13-5X 45Cobalt NEW 2 oz WM-20CST-14 32 WM-75CST-14-5X 45Copper 2 oz WM-20CST-15 32 WM-75CST-15-5X 45Iron 2 oz WM-75CST-27 ** 32 WM-75CST-27-5X 45Lanthanum NEW 2 oz WM-20CST-28 42 --------------- ----Lead 2 oz WM-20CST-29 32 WM-75CST-29-5X 45Lithium 2 oz WM-20CST-30 32 WM-75CST-30-5X 45Magnesium 2 oz WM-20CST-32 32 WM-75CST-32-5X 45Manganese 2 oz WM-20CST-33 32 WM-75CST-33-5X 45Mercury 2 oz WM-20CST-34 42 --------------- ----Molybdenum 2 oz WM-20CST-35 32 WM-75CST-35-5X 45Nickel 2 oz WM-20CST-37 32 WM-75CST-37-5X 45Phosphorous 2 oz WM-20CST-41 32 WM-75CST-41-5X 45Potassium 2 oz WM-20CST-43 32 WM-75CST-43-5X 45Scandium 2 oz WM-20CST-50 65 --------------- ----Selenium NEW 2 oz WM-20CST-51 42 WM-75CST-51-5X 55Silicon 2 oz WM-20CST-52 32 WM-75CST-52-5X 45Silver 2 oz WM-20CST-53 32 WM-75CST-53-5X 45Sodium 2 oz WM-20CST-54 32 WM-75CST-54-5X 45Strontium 2 oz WM-20CST-55 32 --------------- ----Sulfur NEW 2 oz WM-20CST-56 32 WM-75CST-56-5X 45Thallium 2 oz WM-20CST-60 42 --------------- ----Tin 2 oz WM-20CST-63 32 WM-75CST-63-5X 45Titanium 2 oz WM-20CST-64 32 WM-75CST-64-5X 45Vanadium 2 oz WM-75CST-67 ** 32 WM-75CST-67-5X 45Yttrium NEW 2 oz WM-20CST-69 40 WM-75CST-69-5X 100Zinc 2 oz WM-20CST-70 32 WM-75CST-70-5X 45Zirconium 2 oz WM-20CST-71 32 WM-75CST-71-5X 45

Ag (Silver)Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)

Na (Sodium)Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)

Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)Mo (Molybdenum)Na (Sodium)Ni (Nickel)

Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)

Cat. No. Price / UnitMOSOL-75 75 cSt Oil $ 10 / 16 ozMOSOL-20 20 cSt Oil $ 10 / 16 oz

Used to improve the stability or Organo-metallic Standards when diluting intosolvents such as Kerosene.

StabilizerWM-STAB $ 95 / 1 x 2 oz

Metals Additives StandardMA-900-4 $ 100 / 4 ozMA-900-8 $ 140 / 8 oz

Ba, Ca, Mg, P and Zn at 900 µg/g each inHydrocarbon oil

Conc.(µg/g) Unit Cat. No. Price10 4 oz WM-21-1X-4 $ 80

8 oz WM-21-1X-8 10030 4 oz WM-21-3X-4 80

8 oz WM-21-3X-8 10050 4 oz WM-21-5X-4 85

8 oz WM-21-5X-8 105100 4 oz WM-21-10X-4 90

8 oz WM-21-10X-8 160300 4 oz WM-21-30X-4 145

8 oz WM-21-30X-8 260500 4 oz WM-21-50X-4 210

8 oz WM-21-50X-8 380900 4 oz WM-21-90X-4 320

8 oz WM-21-90X-8 580

WM-21-4-SET $ 900set of above 7 x 4 oz

WM-21-8-SET $ 1500set of above 7 x 8 oz

Conc.(µg/g) Unit Cat. No. Price10 4 oz WM-12-1X-4 $ 70

8 oz WM-12-1X-8 9030 4 oz WM-12-3X-4 70

8 oz WM-12-3X-8 9050 4 oz WM-12-5X-4 80

8 oz WM-12-5X-8 100100 4 oz WM-12-10X-4 85

8 oz WM-12-10X-8 150300 4 oz WM-12-30X-4 100

8 oz WM-12-30X-8 180500 4 oz WM-12-50X-4 150

8 oz WM-12-50X-8 270900 4 oz WM-12-90X-4 210

8 oz WM-12-90X-8 380

WM-12-4-SET $ 700set of above 7 x 4 oz

WM-12-8-SET $ 1100set of above 7 x 8 oz

Each Wear MetalStandard contains thebelow list of 12 elementsin hydrocarbon oil at thestated concentration.

P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)

These products do not requireHazardous Shipping charges at thistime.

21 Wear Metal Multi-Element 12 Wear Metal Multi-Element

Single Element Wear Metals Matrix Oil and Stabilizer

Organometallic

Each Wear MetalStandard contains thebelow list of 21 elementsin hydrocarbon oil at thestated concentration.

** in 75cSt Oil for better stability

Page 53: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 47

Sulfur/Phosphorous free (< 1 ppm)Ready for Use

These highly concentrated stabilized solutions can be used for customer specific formulations of additive elements in lubricating oils, iron, nickel andvanadium in residual oil, and wear metals in oils. These organometallic solutions can also be used to prepare single element or multi-elementstandards for plasma emission (ICP or DCP), rotating disk (rotrode), or atomic absorption spectroscopy (AA). The starting materials are PUREREAGENTS and have been certified against NIST SRM’s whenever available. THEY DO NOT CONTAIN PHOSPHORUS OR SULFUR.

Highly Concentrated Liquid Organometallic StandardsStabilized

Sulfur free @ 1000 µg/g Price @ 5000 µg/g PriceElement Cat. No. 50 mL Cat. No. 50 mLAluminum WM-NMS-01 $ 50 WM-NMS-01-5X $ 90Antimony WM-NMS-02 50 WM-NMS-02-5X 90Arsenic NEW WM-NMS-03 50 WM-NMS-03-5X 90Barium WM-NMS-04 50 WM-NMS-04-5X 90Beryllium NEW WM-NMS-05 75 WM-NMS-05-5X 110Cadmium WM-NMS-08 50 WM-NMS-08-5X 90Calcium WM-NMS-09 50 WM-NMS-09-5X 90Chromium WM-NMS-13 50 WM-NMS-13-5X 90Cobalt WM-NMS-14 50 WM-NMS-14-5X 90Copper WM-NMS-15 50 WM-NMS-15-5X 90Gallium NEW WM-NMS-20 75 WM-NMS-20-5X 110Gold NEW WM-NMS-22 120 ---------- ----Iron WM-NMS-27 50 WM-NMS-27-5X 90Lead WM-NMS-29 50 WM-NMS-29-5X 90Lithium NEW WM-NMS-30 75 WM-NMS-30-5X 110Magnesium WM-NMS-32 50 WM-NMS-32-5X 90Manganese WM-NMS-33 50 WM-NMS-33-5X 90Mercury NEW WM-NMS-34 75 WM-NMS-34-5X 110Molybdenum WM-NMS-35 50 WM-NMS-35-5X 90Nickel WM-NMS-37 50 WM-NMS-37-5X 90Phosphorous WM-NMS-41 50 WM-NMS-41-5X 90Potassium WM-NMS-43 50 WM-NMS-43-5X 90Selenium WM-NMS-51 60 WM-NMS-51-5X 100Silicon WM-NMS-52 75 WM-NMS-52-5X 110Silver NEW WM-NMS-53 75 WM-NMS-53-5X 110Sodium WM-NMS-54 50 WM-NMS-54-5X 90Strontium WM-NMS-55 50 WM-NMS-55-5X 90Thallium WM-NMS-60 60 WM-NMS-60-5X 100Tin NEW WM-NMS-63 50 WM-NMS-63-5X 90Titanium WM-NMS-64 50 WM-NMS-64-5X 90Vanadium WM-NMS-67 50 WM-NMS-67-5X 90Yttrium WM-NMS-68 60 WM-NMS-68-5X 100Zinc WM-NMS-70 50 WM-NMS-70-5X 90Zirconium WM-NMS-71 50 WM-NMS-71-5X 90

Element Conc. (Wt. %) Cat. No. (25 grams) Price Cat. No. (50 grams) PriceAluminum 3 WM-NMS-01-30X-25G $ 150 WM-NMS-01-30X-50G $ 210Antimony NEW 2 WM-NMS-02-20X-25G 120 WM-NMS-02-20X-50G 165Barium 12.5 WM-NMS-04-125X-25G 540 WM-NMS-04-125X-50G 780Boron 2.5 WM-NMS-07-25X-25G 130 WM-NMS-07-25X-50G 180Cadmium 10 WM-NMS-08-100X-25G 510 WM-NMS-08-100X-50G 710Calcium 5 WM-NMS-09-50X-25G 250 WM-NMS-09-50X-50G 355Cerium NEW 5 WM-NMS-11-50X-25G 250 WM-NMS-11-50X-50G 350Chromium 3.5 WM-NMS-13-35X-25G 175 WM-NMS-13-35X-50G 265Cobalt 7.5 WM-NMS-14-75X-25G 330 WM-NMS-14-75X-50G 450Copper 6 WM-NMS-15-60X-25G 250 WM-NMS-15-60X-50G 355Iron 4 WM-NMS-27-40X-25G 220 WM-NMS-27-40X-50G 300Lead 20 WM-NMS-29-200X-25G 900 WM-NMS-29-200X-50G 1260Lithium NEW 1.5 WM-NMS-30-15X-25G 155 WM-NMS-30-15X-50G 215Magnesium 3 WM-NMS-32-30X-25G 180 WM-NMS-32-30X-50G 252Manganese 6 WM-NMS-33-60X-25G 280 WM-NMS-33-60X-50G 450Molybdenum 5 WM-NMS-35-50X-25G 215 WM-NMS-35-50X-50G 294Nickel 5 WM-NMS-37-50X-25G 250 WM-NMS-37-50X-50G 350Phosphorus 5 WM-NMS-41-50X-25G 250 WM-NMS-41-50X-50G 350Potassium NEW 7.5 WM-NMS-43-75X-25G 330 WM-NMS-43-75X-50G 450Praseodymium 3 WM-NMS-44-30X-25G 175 WM-NMS-44-30X-50G 240Selenium 3.5 WM-NMS-51-35X-25G 200 WM-NMS-51-35X-50G 270Silicon NEW 7.5 WM-NMS-52-75X-25G 330 WM-NMS-52-75X-50G 450Sodium NEW 2.5 WM-NMS-54-25X-25G 180 WM-NMS-54-25X-50G 252Strontium 10 WM-NMS-55-100X-25G 510 WM-NMS-55-100X-50G 710Thallium 5 WM-NMS-60-50X-25G 265 WM-NMS-60-50X-50G 360Tin NEW 7.5 WM-NMS-63-75X-25G 330 WM-NMS-63-75X-50G 450Titanium 5 WM-NMS-64-50X-25G 215 WM-NMS-64-50X-50G 295Vanadium 4 WM-NMS-67-40X-25G 210 WM-NMS-67-40X-50G 325Yttrium NEW 2.5 WM-NMS-69-25X-25G 180 WM-NMS-69-25X-50G 252Zinc 6 WM-NMS-70-60X-25G 270 WM-NMS-70-60X-50G 380Zirconium 5 WM-NMS-71-50X-25G 250 WM-NMS-71-50X-50G 355

Sulfur belowdetection limits

PremiumSulfur-Free

Technical NoteThese standards are sulfur free(below detection limits)organometallic standards for X-ray Fluorescence (XRF), plasmaemission (ICP or DCP), rotatingdisk (rotrode), or atomicabsorption (AA). They arestabilized for blending togetherwith other Analytes to preparemulti-element standards.

Organometallic StandardsPremium Sulfur-Free

Organometallic Single Element Concentrates

Organometallic Single Element Stock Standards

Stabilizer Solution AASTM-P-0122-0.5 $ 80 / 50 mLASTM-P-0122-1 $ 120 / 100 mL

Stabilizer Solution BASTM-P-0123-0.5 $ 80 / 50 mLASTM-P-0123-1 $ 120 / 100 mL

Organometallic

These products do not requireHazardous Shipping charges at thistime.

ContainsNo Metallic Sulfonates

Stabilization Solutions

The solutions were specificallydesigned for chelating & solubilizingour line of Sulfur-Free OrganometallicStandards. Contact Tech Service foradditional information.

Stabilizer Solution CASTM-P-0124-0.5 $ 80 / 50 mLASTM-P-0124-1 $ 120 / 100 mL

Stabilizer Solution DASTM-P-0125-0.5 $ 80 / 50 mLASTM-P-0125-1 $ 120 / 100 mL

Page 54: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702548

Organometallic StandardsNo Metallic Sulfonates

Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)

Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)

Ag (Silver)Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)

Na (Sodium)Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)

Ni (Nickel)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)

Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)

Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)

Sulfur belowdetection limits

PremiumSulfur-Free

Al (Aluminum)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Na (Sodium)

Each Wear Metal Standard contains 11 elements inhydrocarbon oil at the stated concentration.

Each Wear Metal Standard contains 12 elements inhydrocarbon oil at the stated concentration.

Each Wear Metal Standard contains 20 elements inhydrocarbon oil at the stated concentration.

Each Wear Metal Standard contains 21 elements inhydrocarbon oil at the stated concentration.

Wear Metals Multi-Element

11 Wear Metal Multi-ElementConc.(µg/g) Unit Cat. No. Price

10 100 mL WM-11-NMS-1X-1 $ 13030 100 mL WM-11-NMS-3X-1 13050 100 mL WM-11-NMS-5X-1 130

100 100 mL WM-11-NMS-10X-1 140300 100 mL WM-11-NMS-30X-1 165500 100 mL WM-11-NMS-50X-1 245900 100 mL WM-11-NMS-90X-1 325

WM-11-NMS-1-SET $ 1100set of above 7 x 100 mL

12 Wear Metal Multi-ElementConc.(µg/g) Unit Cat. No. Price

10 100 mL WM-12-NMS-1X-1 $ 13530 100 mL WM-12-NMS-3X-1 13550 100 mL WM-12-NMS-5X-1 135

100 100 mL WM-12-NMS-10X-1 145300 100 mL WM-12-NMS-30X-1 170500 100 mL WM-12-NMS-50X-1 250

WM-12-NMS-1-SET $ 850set of above 6 x 100 mL

20 Wear Metal Multi-Element 21 Wear Metal Multi-ElementConc.(µg/g) Unit Cat. No. Price

10 100 mL WM-20-NMS-1X-1 $ 15030 100 mL WM-20-NMS-3X-1 15050 100 mL WM-20-NMS-5X-1 150

100 100 mL WM-20-NMS-10X-1 170300 100 mL WM-20-NMS-30X-1 230500 100 mL WM-20-NMS-50X-1 350900 100 mL WM-20-NMS-90X-1 500

WM-20-NMS-1-SET $ 1450set of above 7 x 100 mL

Conc.(µg/g) Unit Cat. No. Price10 100 mL WM-21-NMS-1X-1 $ 16030 100 mL WM-21-NMS-3X-1 16050 100 mL WM-21-NMS-5X-1 160

100 100 mL WM-21-NMS-10X-1 180300 100 mL WM-21-NMS-30X-1 240500 100 mL WM-21-NMS-50X-1 350

WM-21-NMS-1-SET $ 1050set of above 6 x 100 mL

Organometallic

These products do not require HazardousShipping charges at this time.

e-Standards™

Just a click away

AccuStandard.comThis is the easier way to get

Chemical Reference Standards

ContainsNo Metallic Sulfonates

Page 55: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 49

Traceable Organometallic Standards forAA, ICP, DCP & XRF Analysis

Internal StandardASTM-P-0107-5 $ 235 / 500 mL

Manganese @ 0.05 Wt. % in Xylene-Mineral Oil

Vanadium Standards - High Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0105-SET $ 780 / 7 x 100 mL

Vanadium PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0105-01 0.0000 $ 135ASTM-P-0105-02 0.0300 135ASTM-P-0105-03 0.0400 135ASTM-P-0105-04 0.0500 135ASTM-P-0105-05 0.0600 135ASTM-P-0105-06 0.0800 135ASTM-P-0105-07 0.1000 135

Vanadium Standards - Low Range for ISO/CD14597 with 0.05% Manganese Internal Standardin Xylene-Mineral OilASTM-P-0104-SET $ 1050 / 9 x 100 mL

Vanadium PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0104-01 0.0005 $ 150ASTM-P-0104-02 0.0025 150ASTM-P-0104-03 0.0050 150ASTM-P-0104-04 0.0075 150ASTM-P-0104-05 0.0100 150ASTM-P-0104-06 0.0125 150ASTM-P-0104-07 0.0150 150ASTM-P-0104-08 0.0175 150ASTM-P-0104-09 0.0200 150

Sulfur and Metals in Mineral OilASTM-P-0100-SET $ 1650 / 12 x 100 mL

Sulfur Nickel Vanadium 100 mLCat. No. (Wt. %) (µg/g) (µg/g) PriceASTM-P-0100-01 0.00 0 0 $ 200ASTM-P-0100-02 0.50 10 500 200ASTM-P-0100-03 1.00 100 25 200ASTM-P-0100-04 1.50 80 250 200ASTM-P-0100-05 2.00 40 100 200ASTM-P-0100-06 2.50 5 400 200ASTM-P-0100-07 3.00 60 300 200ASTM-P-0100-08 3.50 0 200 200ASTM-P-0100-09 4.00 100 0 200ASTM-P-0100-10 4.50 50 250 200ASTM-P-0100-11 5.00 20 500 200ASTM-P-0100-12 5.50 100 50 200

Sulfur and Metals in Mineral OilASTM-P-0102-SET $ 1850 / 12 x 100 mL

Sulfur Iron Nickel Vanadium 100 mLCat. No. (Wt. %) (µg/g) (µg/g) (µg/g) PriceASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 ----- 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 ----- 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200

Sulfur and Metals in Residual Fuel OilASTM-P-0101-SET $ 1800 / 12 x 100 mL

Sulfur Nickel Vanadium 100 mLCat. No. (Wt. %) (µg/g) (µg/g) PriceASTM-P-0101-01 0.00 0 0 $ 200ASTM-P-0101-02 0.50 10 500 200ASTM-P-0101-03 1.00 100 25 200ASTM-P-0101-04 1.50 80 250 200ASTM-P-0101-05 2.00 40 100 200ASTM-P-0101-06 2.50 5 400 200ASTM-P-0101-07 3.00 60 300 200ASTM-P-0101-08 3.50 0 200 200ASTM-P-0101-09 4.00 100 0 200ASTM-P-0101-10 4.50 50 250 200ASTM-P-0101-11 5.00 20 500 200ASTM-P-0101-12 5.50 100 50 200

Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET $ 2100 / 12 x 100 mL

Sulfur Iron Nickel Vanadium 100 mLCat. No. (Wt. %) (µg/g) (µg/g) (µg/g) PriceASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 ----- 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 ----- 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200

Nickel Standards for ISO/CD 14597 with 0.05%Manganese Internal Standard in Xylene-Mineral OilASTM-P-0106-SET $ 780 / 7 x 100 mL

Nickel PriceCat. No. Conc. (Wt.%) 100 mLASTM-P-0106-01 0.0000 $ 135ASTM-P-0106-02 0.0005 135ASTM-P-0106-03 0.0010 135ASTM-P-0106-04 0.0025 135ASTM-P-0106-05 0.0050 135ASTM-P-0106-06 0.0075 135ASTM-P-0106-07 0.0100 135

ISO/CD 14597 Vanadium and Nickel Standards with Manganese (Internal Standard)

Sulfur and Metals in Oil

Designed for ASTM D-5708-95a Designed forASTM D-5708-95a

Organometallic

Page 56: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Designed forASTM D-6481-99

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702550

Traceable Organometallic Standards forAA, ICP, DCP & XRF Analysis

ASTM-P-0110-SET $ 2300 / 17 x 100 mL

Cat. No. Ba Ca P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0110-01 0.100 0.600 0.005 0.175 0.060ASTM-P-0110-02 0.175 0.500 0.200 0.050 0.080ASTM-P-0110-03 0.000 0.400 0.150 0.300 0.180ASTM-P-0110-04 0.025 0.260 0.250 0.150 0.120ASTM-P-0110-05 0.150 0.005 0.005 0.450 0.070ASTM-P-0110-06 0.000 0.400 0.025 0.350 0.100ASTM-P-0110-07 0.200 0.300 0.060 0.250 0.120ASTM-P-0110-08 0.000 0.200 0.100 0.450 0.100ASTM-P-0110-09 0.100 0.060 0.080 0.300 0.130ASTM-P-0110-10 0.050 0.060 0.050 0.200 0.050ASTM-P-0110-11 0.075 0.050 0.120 0.100 0.075ASTM-P-0110-12 0.010 0.025 0.150 0.200 0.130ASTM-P-0110-13 0.005 0.005 0.200 0.400 0.150ASTM-P-0110-14 0.000 0.170 0.250 0.550 0.110ASTM-P-0110-15 0.000 0.100 0.100 0.200 0.200ASTM-P-0110-16 0.005 0.010 0.010 0.600 0.250ASTM-P-0110-17 0.000 0.000 0.000 0.000 0.000

Lubricating Oil Standards

Designed forASTM D-4927-96 Designed forASTM D-4927-96

Designed forASTM D-4628-97 & D-4927-96

Organometallic

ASTM-P-0113-SET $ 2850 / 17 x 100 mL

Cat. No. Ba Ca Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000

ASTM-P-0112-SET $ 2300 / 17 x 100 mL

Cat. No. Ca Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0112-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0112-02 0.500 0.150 0.200 0.050 0.080ASTM-P-0112-03 0.400 0.350 0.150 0.300 0.180ASTM-P-0112-04 0.260 0.225 0.250 0.150 0.120ASTM-P-0112-05 0.005 0.450 0.005 0.450 0.070ASTM-P-0112-06 0.400 0.500 0.025 0.350 0.100ASTM-P-0112-07 0.300 0.325 0.060 0.250 0.120ASTM-P-0112-08 0.200 0.250 0.100 0.450 0.100ASTM-P-0112-09 0.060 0.100 0.080 0.300 0.130ASTM-P-0112-10 0.060 0.400 0.050 0.200 0.050ASTM-P-0112-11 0.050 0.300 0.120 0.100 0.075ASTM-P-0112-12 0.025 0.200 0.150 0.200 0.130ASTM-P-0112-13 0.005 0.375 0.200 0.400 0.150ASTM-P-0112-14 0.170 0.175 0.250 0.550 0.110ASTM-P-0112-15 0.100 0.425 0.100 0.200 0.200ASTM-P-0112-16 0.010 0.275 0.010 0.600 0.250ASTM-P-0112-17 0.000 0.000 0.000 0.000 0.000

ASTM-P-0111-SET $ 2800 / 17 x 100 mL

Cat. No. Ba Ca Cl P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0111-01 0.100 0.600 0.100 0.005 0.175 0.060ASTM-P-0111-02 0.175 0.500 0.000 0.200 0.050 0.080ASTM-P-0111-03 0.000 0.400 0.010 0.150 0.300 0.180ASTM-P-0111-04 0.025 0.260 0.500 0.250 0.150 0.120ASTM-P-0111-05 0.150 0.005 1.000 0.005 0.450 0.070ASTM-P-0111-06 0.000 0.400 0.400 0.025 0.350 0.100ASTM-P-0111-07 0.200 0.300 0.100 0.060 0.250 0.120ASTM-P-0111-08 0.000 0.200 0.010 0.100 0.450 0.100ASTM-P-0111-09 0.100 0.060 0.050 0.080 0.300 0.130ASTM-P-0111-10 0.050 0.060 0.200 0.050 0.200 0.050ASTM-P-0111-11 0.075 0.050 0.500 0.120 0.100 0.075ASTM-P-0111-12 0.010 0.025 0.800 0.150 0.200 0.130ASTM-P-0111-13 0.005 0.005 1.000 0.200 0.400 0.150ASTM-P-0111-14 0.000 0.170 0.600 0.250 0.550 0.110ASTM-P-0111-15 0.000 0.100 0.200 0.100 0.200 0.200ASTM-P-0111-16 0.005 0.010 0.400 0.010 0.600 0.250ASTM-P-0111-17 0.000 0.000 0.000 0.000 0.000 0.000

ASTM-P-0109-SET $ 1600 / 17 x 100 mL

Cat. No. Ca Cl P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0109-01 0.600 0.100 0.005 0.175 0.060ASTM-P-0109-02 0.500 0.000 0.200 0.050 0.080ASTM-P-0109-03 0.400 0.010 0.150 0.300 0.180ASTM-P-0109-04 0.260 0.500 0.250 0.150 0.120ASTM-P-0109-05 0.005 1.000 0.005 0.450 0.070ASTM-P-0109-06 0.400 0.400 0.025 0.350 0.100ASTM-P-0109-07 0.300 0.100 0.060 0.250 0.120ASTM-P-0109-08 0.200 0.010 0.100 0.450 0.100ASTM-P-0109-09 0.060 0.050 0.080 0.300 0.130ASTM-P-0109-10 0.060 0.200 0.050 0.200 0.050ASTM-P-0109-11 0.050 0.500 0.120 0.100 0.075ASTM-P-0109-12 0.025 0.800 0.150 0.200 0.130ASTM-P-0109-13 0.005 1.000 0.200 0.400 0.150ASTM-P-0109-14 0.170 0.600 0.250 0.550 0.110ASTM-P-0109-15 0.100 0.200 0.100 0.200 0.200ASTM-P-0109-16 0.010 0.400 0.010 0.600 0.250ASTM-P-0109-17 0.000 0.000 0.000 0.000 0.000

ASTM-P-0108-SET $ 1900 / 17 x 100 mL

Cat. No. Ca P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0108-01 0.600 0.005 0.175 0.060ASTM-P-0108-02 0.500 0.200 0.050 0.080ASTM-P-0108-03 0.400 0.150 0.300 0.180ASTM-P-0108-04 0.260 0.250 0.150 0.120ASTM-P-0108-05 0.005 0.005 0.450 0.070ASTM-P-0108-06 0.400 0.025 0.350 0.100ASTM-P-0108-07 0.300 0.060 0.250 0.120ASTM-P-0108-08 0.200 0.100 0.450 0.100ASTM-P-0108-09 0.060 0.080 0.300 0.130ASTM-P-0108-10 0.060 0.050 0.200 0.050ASTM-P-0108-11 0.050 0.120 0.100 0.075ASTM-P-0108-12 0.025 0.150 0.200 0.130ASTM-P-0108-13 0.005 0.200 0.400 0.150ASTM-P-0108-14 0.170 0.250 0.550 0.110ASTM-P-0108-15 0.100 0.100 0.200 0.200ASTM-P-0108-16 0.010 0.010 0.600 0.250ASTM-P-0108-17 0.000 0.000 0.000 0.000

These products do not require HazardousShipping charges at this time.

Page 57: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 51

Traceable Organometallic Standards forAA, ICP, DCP & XRF Analysis

ASTM-P-0116-SET $ 2450 / 11 x 100 mL

AdditivesCat. No. Ca P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0116-01 0.500 1.000 0.500 0.500ASTM-P-0116-02 3.000 1.000 3.000 2.000ASTM-P-0116-03 2.000 1.250 1.000 1.500ASTM-P-0116-04 5.000 1.500 0.500 1.200ASTM-P-0116-05 4.000 0.500 1.500 0.750ASTM-P-0116-06 2.500 0.750 4.000 1.000ASTM-P-0116-07 4.000 0.500 2.000 1.250ASTM-P-0116-08 0.500 2.000 5.000 1.000ASTM-P-0116-09 1.000 0.750 2.000 1.500ASTM-P-0116-10 2.500 1.200 3.000 0.500ASTM-P-0116-11 0.000 0.000 0.000 0.000

ASTM-P-0118-SET $ 2400 / 10 x 100 mL

WLXRF ASTM MethodCat. No. Ba Ca Cl Cu Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0118-01 0.020 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0118-02 0.250 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0118-03 0.020 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0118-04 0.250 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0118-05 0.020 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0118-06 0.250 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0118-07 0.020 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0118-08 0.250 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0118-09 0.130 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0118-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

ASTM-P-0117-SET $ 2100 / 10 x 100 mL

WLXRF ASTM MethodCat. No. Ca Cl Cu Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0117-01 0.020 0.030 0.010 0.200 0.250 1.000 0.020ASTM-P-0117-02 0.020 0.020 0.050 0.200 0.020 0.020 0.250ASTM-P-0117-03 0.020 0.200 0.010 0.040 0.250 0.150 0.250ASTM-P-0117-04 0.020 0.200 0.050 0.040 0.020 1.000 0.020ASTM-P-0117-05 0.400 0.020 0.010 0.040 0.020 1.000 0.250ASTM-P-0117-06 0.400 0.020 0.050 0.040 0.250 0.020 0.020ASTM-P-0117-07 0.400 0.200 0.010 0.200 0.020 0.020 0.050ASTM-P-0117-08 0.400 0.200 0.050 0.200 0.250 1.000 0.250ASTM-P-0117-09 0.200 0.100 0.025 0.080 0.150 0.500 0.100ASTM-P-0117-10 0.000 0.000 0.000 0.000 0.000 0.000 0.000

ASTM-P-0115-SET $ 2300 / 17 x 100 mL

Cat. No. Ca P S Zn MgNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0115-01 0.005 0.005 0.050 0.050 0.100ASTM-P-0115-02 0.600 0.000 0.000 0.000 0.150ASTM-P-0115-03 0.000 0.300 0.000 0.000 0.350ASTM-P-0115-04 1.000 0.000 1.000 0.000 0.225ASTM-P-0115-05 0.000 0.000 0.000 0.300 0.450ASTM-P-0115-06 0.005 0.250 0.800 0.300 0.500ASTM-P-0115-07 0.500 0.150 0.500 0.150 0.325ASTM-P-0115-08 0.010 0.200 0.100 0.250 0.250ASTM-P-0115-09 0.050 0.010 0.400 0.075 0.050ASTM-P-0115-10 0.100 0.150 0.200 0.200 0.400ASTM-P-0115-11 0.200 0.200 0.800 0.100 0.300ASTM-P-0115-12 0.400 0.005 0.800 0.300 0.200ASTM-P-0115-13 0.600 0.100 0.500 0.050 0.375ASTM-P-0115-14 0.800 0.010 0.050 0.100 0.175ASTM-P-0115-15 1.000 0.300 1.000 0.150 0.425ASTM-P-0115-16 0.400 0.050 0.600 0.250 0.275ASTM-P-0115-17 0.000 0.000 0.000 0.000 0.000

ASTM-P-0114-SET $ 1900 / 17 x 100 mL

EDXRF ASTM MethodCat. No. Ca P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0114-01 0.005 0.005 0.050 0.050ASTM-P-0114-02 0.600 0.000 0.000 0.000ASTM-P-0114-03 0.000 0.300 0.000 0.000ASTM-P-0114-04 1.000 0.000 1.000 0.000ASTM-P-0114-05 0.000 0.000 0.000 0.300ASTM-P-0114-06 0.005 0.250 0.800 0.300ASTM-P-0114-07 0.500 0.150 0.500 0.150ASTM-P-0114-08 0.010 0.200 0.100 0.250ASTM-P-0114-09 0.050 0.010 0.400 0.075ASTM-P-0114-10 0.100 0.150 0.200 0.200ASTM-P-0114-11 0.200 0.200 0.800 0.100ASTM-P-0114-12 0.400 0.005 0.800 0.300ASTM-P-0114-13 0.600 0.100 0.500 0.050ASTM-P-0114-14 0.800 0.010 0.050 0.100ASTM-P-0114-15 1.000 0.300 1.000 0.150ASTM-P-0114-16 0.400 0.050 0.600 0.250ASTM-P-0114-17 0.000 0.000 0.000 0.000

Lubricating Oil Standards (Continued)

Designed for ASTM D-6481-99

Designed forASTM D-6443-99

Designed for ASTM D-4628-97, D-4927-96, D-4951-96, D-6443-99

Lubricating Oil Standards continued on next page

Designed for ASTM D-6481-99

Organometallic

Standards

Page 58: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702552

Traceable Organometallic Standards forAA, ICP, DCP & XRF Analysis

Stabilizer Solution AASTM-P-0122-0.5 $ 80 / 50 mLASTM-P-0122-1 $ 120 / 100 mL

Stabilizer Solution BASTM-P-0123-0.5 $ 80 / 50 mLASTM-P-0123-1 $ 120 / 100 mL

Standards of InterestConcentration for the sets on pages50-52 are targets. Actual productionlots may vary.

Lubricating Oil Standards (Continued)

Designed for ASTM D-4628-97, D-4927-96, D-4951-96, D-6443-99

ASTM-P-0119-SET $ 2900 / 22 x 100 mL

Cat. No. Ca Cl Cu Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0119-01 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0119-02 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0119-03 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0119-04 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0119-05 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0119-06 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0119-07 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0119-08 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0119-09 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0119-10 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0119-11 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0119-12 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0119-13 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0119-14 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0119-15 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0119-16 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0119-17 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0119-18 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0119-19 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0119-20 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0119-21 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0119-22 0.000 0.000 0.000 0.000 0.000 0.000 0.000

ASTM-P-0120-SET $ 3100 / 23 x 100 mL

Cat. No. Ba Ca Cl Cu Mg P S ZnNominal Value (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0120-01 0.100 0.300 0.080 0.030 0.060 0.060 0.275 0.060ASTM-P-0120-02 0.175 0.250 0.100 0.000 0.010 0.150 0.000 0.150ASTM-P-0120-03 0.040 0.500 0.000 0.035 0.160 0.150 0.000 0.020ASTM-P-0120-04 0.020 0.350 0.010 0.000 0.120 0.080 0.200 0.000ASTM-P-0120-05 0.150 0.110 0.000 0.015 0.100 0.100 0.300 0.050ASTM-P-0120-06 0.000 0.200 0.100 0.000 0.200 0.050 0.250 0.150ASTM-P-0120-07 0.200 0.000 0.050 0.025 0.000 0.000 0.450 0.020ASTM-P-0120-08 0.000 0.150 0.030 0.000 0.100 0.030 0.400 0.040ASTM-P-0120-09 0.000 0.250 0.150 0.010 0.160 0.000 0.350 0.080ASTM-P-0120-10 0.000 0.110 0.150 0.040 0.005 0.030 0.750 0.150ASTM-P-0120-11 0.100 0.260 0.050 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-12 0.050 0.200 0.000 0.005 0.140 0.080 0.500 0.080ASTM-P-0120-13 0.000 0.000 0.000 0.005 0.020 0.020 0.200 0.020ASTM-P-0120-14 0.080 0.070 0.150 0.020 0.080 0.140 0.650 0.150ASTM-P-0120-15 0.010 0.050 0.000 0.000 0.000 0.150 0.000 0.000ASTM-P-0120-16 0.000 0.400 0.000 0.001 0.080 0.000 0.500 0.020ASTM-P-0120-17 0.000 0.180 0.020 0.020 0.000 0.020 0.600 0.060ASTM-P-0120-18 0.000 0.400 0.010 0.001 0.010 0.020 0.000 0.000ASTM-P-0120-19 0.150 0.010 0.020 0.040 0.010 0.020 0.200 0.100ASTM-P-0120-20 0.005 0.050 0.005 0.050 0.000 0.008 0.000 0.120ASTM-P-0120-21 0.100 0.200 0.050 0.020 0.080 0.050 0.275 0.050ASTM-P-0120-22 0.120 0.200 0.000 0.000 0.000 0.000 0.750 0.000ASTM-P-0120-23 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000

Metal Working Fluids Stabilization SolutionsASTM-P-0121-SET $ 1300 / 13 x 100 mL

Cat. No. Cl P SNominal Value (Wt.%) (Wt.%) (Wt.%)ASTM-P-0121-01 0.000 0.000 0.000ASTM-P-0121-02 0.750 0.025 0.500ASTM-P-0121-03 0.050 0.100 3.000ASTM-P-0121-04 1.000 0.500 2.500ASTM-P-0121-05 0.100 0.005 2.000ASTM-P-0121-06 1.500 0.200 1.000ASTM-P-0121-07 2.000 0.005 3.000ASTM-P-0121-08 1.000 0.050 0.100ASTM-P-0121-09 0.500 0.400 0.000ASTM-P-0121-10 2.000 0.200 1.500ASTM-P-0121-11 0.000 0.500 1.500ASTM-P-0121-12 1.250 0.010 0.050ASTM-P-0121-13 0.050 0.300 0.050

Organometallic

These products do not require HazardousShipping charges at this time.

Stabilizer Solution CASTM-P-0124-0.5 $ 80 / 50 mLASTM-P-0124-1 $ 120 / 100 mL

Stabilizer Solution DASTM-P-0125-0.5 $ 80 / 50 mLASTM-P-0125-1 $ 120 / 100 mL

The solutions were specifically designed for chelating & solubilizing our line of Sulfur-Free Organometallic Standards. Contact Tech Service for additional information.

Page 59: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 535353

• Ultra Low Sulfur Matrices • Convenient Packaging• Wide Variety of Matrices

Traceable Sulfur Calibration StandardsSulfur Calibration Standards

AccuStandard's Technical Service Dept. can provideReady-to-Inject working level calibration standards tomeet unique laboratory applications call or fax us yourstandard requirements.

Working Level Standards &Continuing Calibration Check (CCC)

Ready-to-UseAccuStandard is the first standard manufacturer to provide sulfurstandards in convenient and Ready-to-Aspirate AccuShot 20 mLsealed ampules. Each 20 mL AccuShot provides the necessarymaterial for calibration curve development or daily QA/QC. Bypurchasing AccuShots the analytical chemist can open a fresh shotfor each analysis which eliminates opening and pipetting repeatedlyfrom a stock bottle. This minimizes contamination and evaporation.These ship with no haz fee for additional savings.

Technical NoteSulfur concentration calculated from % sulfur in di-n-butyl sulfide.

Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 & Proposed ASTM Sulfur Methods

Sulfur in Mineral Oil

Sulfur in #2 Diesel Fuel

SulfurM

ethods

Sulfur in Heavy Weight Mineral Oil (75 cSt)Sulfur in Ready-to-Use

Concentration White Mineral Oil Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.

Blank 0.000 SWMO-BL-4 SWMO-BL-20ML-PAK100 0.010 SWMO-1X-4 SWMO-1X-20ML-PAK200 0.020 SWMO-2X-4 SWMO-2X-20ML-PAK300 0.030 SWMO-3X-4 SWMO-3X-20ML-PAK400 0.040 SWMO-4X-4 SWMO-4X-20ML-PAK500 0.050 SWMO-5X-4 SWMO-5X-20ML-PAK750 0.075 SWMO-7.5X-4 SWMO-7.5X-20ML-PAK

1,000 0.10 SWMO-10X-4 SWMO-10X-20ML-PAK1,500 0.15 SWMO-15X-4 SWMO-15X-20ML-PAK2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-30X-4 SWMO-30X-20ML-PAK4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-50X-4 SWMO-50X-20ML-PAK7,000 0.70 SWMO-70X-4 SWMO-70X-20ML-PAK

10,000 1.00 SWMO-100X-4 SWMO-100X-20ML-PAK15,000 1.50 SWMO-150X-4 SWMO-150X-20ML-PAK20,000 2.00 SWMO-200X-4 SWMO-200X-20ML-PAK30,000 3.00 SWMO-300X-4 SWMO-300X-20ML-PAK40,000 4.00 SWMO-400X-4 SWMO-400X-20ML-PAK50,000 5.00 SWMO-500X-4 SWMO-500X-20ML-PAK60,000 6.00 SWMO-600X-4 SWMO-600X-20ML-PAK

Set of above SWMO-CAL-4-SET 5 x 20 mL ampules at Cat. No.’s 19 x 4 oz. $ 850 stated conc. for $ 60Individual Sulfur 1-10 units10+unitsStandards 4 oz. Bottle $ 55 ea $ 50 ea

Sulfur in Light Weight Mineral Oil (20 cSt)Sulfur in Ready-to-Use

Concentration White Mineral Oil Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.

Blank 0.000 SWMO-LT-BL-4 SWMO-LT-BL-20ML-PAK100 0.010 SWMO-LT-1X-4 SWMO-LT-1X-20ML-PAK200 0.020 SWMO-LT-2X-4 SWMO-LT-2X-20ML-PAK300 0.030 SWMO-LT-3X-4 SWMO-LT-3X-20ML-PAK400 0.040 SWMO-LT-4X-4 SWMO-LT-4X-20ML-PAK500 0.050 SWMO-LT-5X-4 SWMO-LT-5X-20ML-PAK750 0.075 SWMO-LT-7.5X-4 SWMO-LT-7.5X-20ML-PAK

1,000 0.10 SWMO-LT-10X-4 SWMO-LT-10X-20ML-PAK1,500 0.15 SWMO-LT-15X-4 SWMO-LT-15X-20ML-PAK2,000 0.20 -------------------- --------------------------3,000 0.30 SWMO-LT-30X-4 SWMO-LT-30X-20ML-PAK4,000 0.40 -------------------- --------------------------5,000 0.50 SWMO-LT-50X-4 SWMO-LT-50X-20ML-PAK7,000 0.70 SWMO-LT-70X-4 SWMO-LT-70X-20ML-PAK

10,000 1.00 SWMO-LT-100X-4 SWMO-LT-100X-20ML-PAK15,000 1.50 SWMO-LT-150X-4 SWMO-LT-150X-20ML-PAK20,000 2.00 SWMO-LT-200X-4 SWMO-LT-200X-20ML-PAK30,000 3.00 SWMO-LT-300X-4 SWMO-LT-300X-20ML-PAK40,000 4.00 SWMO-LT-400X-4 SWMO-LT-400X-20ML-PAK50,000 5.00 SWMO-LT-500X-4 SWMO-LT-500X-20ML-PAK60,000 6.00 SWMO-LT-600X-4 SWMO-LT-600X-20ML-PAK

Set of above SWMO-LT-CAL-4-SET 5 x 20 mL ampules at Cat. No.’s 19 x 4 oz. $ 850 stated conc. for $ 60Individual Sulfur 1-10 units 10+unitsStandards 4 oz. Bottle $ 55 ea $ 50 ea

Sulfur in Ready-to-UseConcentration #2 Diesel Fuel Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.

Blank 0.000 SDF-BL-4 ∆ SDF-BL-20ML-PAK100 0.010 SDF-1X-4 ∆ SDF-1X-20ML-PAK200 0.020 SDF-2X-4 ∆ SDF-2X-20ML-PAK300 0.030 SDF-3X-4 ∆ SDF-3X-20ML-PAK400 0.040 SDF-4X-4 ∆ SDF-4X-20ML-PAK500 0.050 SDF-5X-4 ∆ SDF-5X-20ML-PAK750 0.075 SDF-7.5X-4 ∆ SDF-7.5X-20ML-PAK

1,000 0.10 SDF-10X-4 ∆ SDF-10X-20ML-PAK1,500 0.15 SDF-15X-4 ∆ SDF-15X-20ML-PAK2,000 0.20 ------------- -------------3,000 0.30 SDF-30X-4 ∆ SDF-30X-20ML-PAK4,000 0.40 ------------- -------------5,000 0.50 SDF-50X-4 ∆ SDF-50X-20ML-PAK7,000 0.70 SDF-70X-4 ∆ SDF-70X-20ML-PAK

10,000 1.00 SDF-100X-4 ∆ SDF-100X-20ML-PAK15,000 1.50 SDF-150X-4 ∆ SDF-150X-20ML-PAK20,000 2.00 SDF-200X-4 ∆ SDF-200X-20ML-PAK30,000 3.00 SDF-300X-4 ∆ SDF-300X-20ML-PAK40,000 4.00 SDF-400X-4 ∆ SDF-400X-20ML-PAK50,000 5.00 SDF-500X-4 ∆ SDF-500X-20ML-PAK60,000 6.00 SDF-600X-4 ∆ SDF-600X-20ML-PAK

Set of above SDF-CAL-4-SET ∆ 5 x 20 mL ampules at Cat. No.’s 19 x 4 oz. $ 850 stated conc. for $ 60Individual Sulfur 1-10 units10+unitsStandards 4 oz. Bottle $ 55 ea $ 50 ea

∆ These products require a Hazardous Shipping Charge

Page 60: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702554

Trace Quantities of Sulfur in LiquidAromatic Hydrocarbons by Oxidative MicrocoulometryASTM-P-0020-PAK $ 75 / 5 x 1 mL1000 µg/mL in Xylenes

Sulfur (as Dibenzothiophene)

Sulfur in Crude Oil StandardsConcentration Sulfur in Crude Oilµg/g Wt. % Cat. No.

1,000 0.10 SCO-10X-4 ∆2,500 0.25 SCO-25X-4 ∆5,000 0.50 SCO-50X-4 ∆

10,000 1.00 SCO-100X-4 ∆20,000 2.00 SCO-200X-4 ∆30,000 3.00 SCO-300X-4 ∆40,000 4.00 SCO-400X-4 ∆50,000 5.00 SCO-500X-4 ∆

Set of above SCO-CAL-4-SETCat. No.’s 8 x 4 oz. $ 500Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz. Bottle $ 75 ea $ 65 ea

Sulfur in Residual Oil StandardsConcentration Sulfur in Crude Oilµg/g Wt. % Cat. No.

3,500 0.35 SRO-35X-47,000 0.70 SRO-70X-4

10,000 1.00 SRO-100X-415,000 1.50 SRO-150X-420,000 2.00 SRO-200X-430,000 3.00 SRO-300X-440,000 4.00 SRO-400X-4

Set of above SRO-CAL-4-SETCat. No.’s 7 x 4 oz. $ 450Individual Sulfur 1 -10 units 10 +unitsStandards 4 oz. Bottle $ 75 ea $ 65 ea

Total Sulfur in Aromatic Compounds byHydrogenolysis and RateometricColorimetryASTM-P-0010-PAK $ 75 / 5 x 1 mL1000 µg/mL in Toluene

Sulfur (as Thiophene)

Sulfur in Light Distillate KeroseneSulfur in Light Ready-to-Use

Concentration Distillate Kerosene Sulfur AccuShotsµg/g Wt. % Cat. No. Cat. No.

Blank 0.000 SK-BL-4 ∆ SK-BL-20ML-PAK100 0.010 SK-1X-4 ∆ SK-1X-20ML-PAK200 0.020 --------------- ---------------300 0.030 SK-3X-4 ∆ SK-3X-20ML-PAK400 0.040 --------------- ---------------500 0.050 SK-5X-4 ∆ SK-5X-20ML-PAK750 0.075 SK-7.5X-4 ∆ SK-7.5X-20ML-PAK

1,000 0.10 SK-10X-4 ∆ SK-10X-20ML-PAK1,500 0.15 --------------- ---------------2,000 0.20 SK-20X-4 ∆ SK-20X-20ML-PAK3,000 0.30 SK-30X-4 ∆ SK-30X-20ML-PAK4,000 0.40 SK-40X-4 ∆ SK-40X-20ML-PAK5,000 0.50 SK-50X-4 ∆ SK-50X-20ML-PAK7,000 0.70 --------------- ---------------

10,000 1.00 SK-100X-4 ∆ SK-100X-20ML-PAK15,000 1.50 --------------- ---------------20,000 2.00 SK-200X-4 ∆ SK-200X-20ML-PAK30,000 3.00 --------------- ---------------40,000 4.00 --------------- ---------------50,000 5.00 --------------- ---------------60,000 6.00 --------------- ---------------

Set of above SK-CAL-4-SET ∆ 5 x 20 mL ampules at Cat. No.’s 12 x 4 oz. $ 500 stated conc. for $ 60Individual Sulfur 1-10 units 10+unitsStds. 4 oz. Bottle $ 55 ea $ 50 ea

Sulfur in Heavy Distillate KeroseneSulfur in Heavy

Concentration Distillate Keroseneµg/g Wt. % Cat. No.

Blank 0.000 SK-HD-BL-4 ∆100 0.010 SK-HD-1X-4 ∆200 0.020 SK-HD-2X-4 ∆300 0.030 SK-HD-3X-4 ∆400 0.040 SK-HD-4X-4 ∆500 0.050 SK-HD-5X-4 ∆750 0.075 SK-HD-7.5X-4 ∆

1,000 0.10 SK-HD-10X-4 ∆1,500 0.15 SK-HD-15X-4 ∆2,000 0.20 SK-HD-20X-4 ∆3,000 0.30 SK-HD-30X-4 ∆4,000 0.40 SK-HD-40X-4 ∆5,000 0.50 SK-HD-50X-4 ∆7,000 0.70 SK-HD-70X-4 ∆

10,000 1.00 SK-HD-100X-4 ∆15,000 1.50 SK-HD-150X-4 ∆20,000 2.00 SK-HD-200X-4 ∆30,000 3.00 SK-HD-300X-4 ∆40,000 4.00 SK-HD-400X-4 ∆50,000 5.00 SK-HD-500X-4 ∆60,000 6.00 SK-HD-600X-4 ∆

Set of above SK-HD-CAL-4-SET ∆Cat. No.’s 21 x 4 oz. $ 950Individual Sulfur 1 -10 units10 +unitsStds. 4 oz. Bottle $ 55 ea $ 50 ea

Technical NoteSulfur concentrationcalculated from % sulfur indi-n-butyl sulfide.

Standards of InterestFor the mandatory realworld QC samplesstipulated in the Method,see pages 56.

Traceable Sulfur Calibration StandardsSulfur Calibration Standards

Sulfur Standards for ASTM D-2622, D-3120, D-3246, D-4294, D-5453, D-6334, D-6445 & Proposed ASTM Sulfur Methods

Sulfur in Kerosene

Sulfur in Crude Oil and Residual Oil

Proposed ASTM Methods Sulfur Calibration Standards

Technical NoteWell characterized Thiophene is used in a lowsulfur Toluene matrix for this stock calibrationstandard.

Technical NoteWell characterized Dibenzothiophene is usedin a low sulfur Xylene matrix for this stockcalibration standard.

SulfurM

ethods

∆ These products require a Hazardous Shipping Charge

Page 61: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 55

Traceable Standards for ASTM MethodsSulfur Calibration Standards

Sulfur Calibration Standards in Isooctane forGasoline & Reformulated Gasoline Analysis

Cat. No. Sulfur Conc. Sulfur Wt. % UnitSTP-BL-4 ∆ Blank 0.0 4 oz.STP-1X-4 ∆ 10 µg/g 0.001 4 oz.STP-2X-4 ∆ 20 µg/g 0.002 4 oz.STP-3X-4 ∆ 30 µg/g 0.003 4 oz.STP-5X-4 ∆ 50 µg/g 0.005 4 oz.STP-10X-4 ∆ 100 µg/g 0.010 4 oz.STP-20X-4 ∆ 200 µg/g 0.020 4 oz.STP-30X-4 ∆ 300 µg/g 0.030 4 oz.STP-40X-4 ∆ 400 µg/g 0.040 4 oz.STP-60X-4 ∆ 600 µg/g 0.060 4 oz.STP-100X-4 ∆ 1000 µg/g 0.10 4 oz.STP-200X-4 ∆ 2000 µg/g 0.20 4 oz.STP-300X-4 ∆ 3000 µg/g 0.30 4 oz.

STP-CAL-SET ∆ $ 650 / set of 13 x 4 oz.In Isooctane Set contains the above 13 individual bottles

Standards can be mixed for quantity discounts1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard

Mid Level Sulfur Calibration Standards for use onXRF Energy Dispersive or Wavelength Instruments

Cat. No. Sulfur Conc. Sulfur Wt. % UnitD-2622-LL-200X-4 ∆ 200 µg/g 0.020 4 ozD-2622-LL-400X-4 ∆ 400 µg/g 0.040 4 ozD-2622-LL-600X-4 ∆ 600 µg/g 0.060 4 ozD-2622-LL-700X-4 ∆ 700 µg/g 0.070 4 ozD-2622-LL-800X-4 ∆ 800 µg/g 0.080 4 ozD-2622-LL-900X-4 ∆ 900 µg/g 0.090 4 ozD-2622-LL-1100X-4 ∆ 1100 µg/g 0.110 4 ozD-2622-LL-1200X-4 ∆ 1200 µg/g 0.120 4 oz

Standards can be mixed for quantity discounts1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard

Low Level Sulfur Calibration Standardsfor use on XRF Energy Dispersive or Wavelength Instruments

Cat. No. Sulfur Conc. Sulfur Wt. % UnitD-2622-LL-BL-4 ∆ Blank 0.0 4 oz.D-2622-LL-5X-4 ∆ 5 µg/g 0.0005 4 oz.D-2622-LL-10X-4 ∆ 10 µg/g 0.0010 4 oz.D-2622-LL-30X-4 ∆ 30 µg/g 0.0030 4 oz.D-2622-LL-50X-4 ∆ 50 µg/g 0.0050 4 oz.D-2622-LL-75X-4 ∆ 75 µg/g 0.0075 4 oz.D-2622-LL-100X-4 ∆ 100 µg/g 0.010 4 oz.D-2622-LL-300X-4 ∆ 300 µg/g 0.030 4 oz.D-2622-LL-500X-4 ∆ 500 µg/g 0.050 4 oz.D-2622-LL-1000X-4 ∆ 1000 µg/g 0.100 4 oz.

D-2622-LL-CAL-SET ∆ $ 450 / 10 x 4 oz.In Isooctane : Toluene (3:1)

Set contains the above 10 individual bottles

Standards can be mixed for quantity discounts1 to 4 units $ 60 each per Sulfur Standard5 to 10 units $ 55 each per Sulfur Standardmore than 10 units $ 50 each per Sulfur Standard

Sulfur Calibration SetD-3120-92-CAL-SET $ 75 / set of 8 x 1 mLIn Isooctane

Cat. No. Sulfur Conc. Sulfur Wt. %D-3120-92-BL Blank ———D-3120-92-1X 1 µg/g 0.0001D-3120-92-3X 3 µg/g 0.0003D-3120-92-10X 10 µg/g 0.0010D-3120-92-30X 30 µg/g 0.0030D-3120-92-50X 50 µg/g 0.0050D-3120-92-75X 75 µg/g 0.0075D-3120-92-100X 100 µg/g 0.010

Member

AccuStandard is an active member in ASTM andstrives to keep abreast of ASTM method revisions.If our listed formulation does not meet the mostrecent method revision, please contact TechnicalSupport for an updated product.

Technical NoteWell characterized di-n-butyl sulfide is used in a low sulfurIsooctane matrix for this calibration set.

Standards of InterestFor the mandatory real world QC samples stipulated in manyASTM Sulfur Methods, see page 56.

Technical NoteA well characterized di-n-butyl sulfide starting material is used witha low sulfur Isooctane matrix for RFG/gasoline sulfur standards.

Technical NoteWell characterized Thiophene & 2-Methyl thiophene are used in alow sulfur Isooctane/Toluene matrix for this calibration set.

ASTM D-2622, D-4294 Designed forD-2622-98D-4294-98

ASTM D-3120, D-3246

ASTM D-2622, D-6334, D-6445

SulfurM

ethods

Designed forD-3120-96D-3246-96

Designed forD-2622-98D-6334-98D-6445-99

∆ These products require a Hazardous Shipping Charge

Page 62: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702556

Traceable Standards for ASTM MethodsSulfur in Gasoline QA/QC Standards

AccuPetroCheck QC StandardsTwo of the fuels are available asAccuPetroCheck Consensus Value QCStandards. The AccuPetroCheck CARBand Conventional gasoline referencematerials have all parameters listed on thecertificate with the Consensus Values andthe regression equations forreproducability. Use of these ReferenceMaterials improve the quality of laboratoryresults. The Consensus Values listedreflect initial statistical treatment of thedata at the time the catalog waspublished. The actual certificate providedwith the AccuPetroCheck QC standardwill have the accepted Consensus Valuebased on statistical treatment of the data.

Conventional Gasoline QC StandardASTM-FUEL-QCS-02-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 34.6 Vol.%Total Olefins D-1319 12.4 Vol.%Total Saturates D-1319 62.8 Vol.%Sulfur D-2622 0.0338 Wt.%Sulfur D-4294 0.0368 Wt.%Sulfur D-5453 317.36 µg/gSulfur D-6344 338.78 µg/gBenzene D-5769 0.55 Vol.%Toluene D-5769 5.53 Vol.%Total Aromatics D-5769 32.51 Vol.%Benzene D-6227 0.52 Vol.%Total Olefins D-6550 12.4 Vol.%

CARB Low Sulfur RFG QC StandardASTM-FUEL-QCS-01-PAK $ 60 / 5 x 15 mLParameter Method Value Conc.Total Aromatics D-1319 24.5 Vol.%Total Olefins D-1319 5.3 Vol.%Total Saturates D-1319 58.3 Vol.%Sulfur D-2622 0.0057 Wt.%Sulfur D-4294 0.0078 Wt.%Sulfur D-5453 55.76 µg/gSulfur D-6344 59.31 µg/gBenzene D-5769 0.80 Vol.%Toluene D-5769 4.92 Vol.%Total Aromatics D-5769 23.42 Vol.%Benzene D-6227 0.78 Vol.%Total Olefins D-6550 5.3 Vol.%

AccuPetroCheck and AccuPetroTest Real World Gasoline QC StandardsIn cooperation with ASTM D-02 subcommittee 3 and 4, AccuStandard ampuled 21 Real World gasoline reference fuels. Consensus Values havebeen determined for these reference fuels by various ASTM Round Robins to provide Petrochemical Laboratories with a source of well characterizedgasoline standards for use in QA/QC applications and as Single Blind test samples over an extended period of time. As new ASTM D-02.03 and D-02.04 Test methods are promulgated they require mandatory Quality Control testing of real world samples. AccuStandard’s AccuPetroTest &AccuPetroCheck standards are being successfully used to achieve these new Quality Control requirements.

Sulfur QC SampleSBPT-SGAS $ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur D-2622 0.0001 - 0.0930 Wt.%Sulfur D-4294 0.0016 - 0.0930 Wt.%Sulfur D-5453 4.0 - 500 µg/gSulfur D-XXXX 1.0 - 1000 µg/g

See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453 for Sulfur Calibration Standards

Olefins QC SampleSBPT-OLEFIN $ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-1319 8-60 Vol.%Total Olefins D-1319 1 - 40 Vol.%Total Saturates D-1319 30-80 Vol. %

See ASTM Method D-1319 for Sulfur CalibrationStandards

AccuPetroTest Single BlindStandardsPetrochemical Laboratories looking totest the performance of the laboratoryfor a specific parameter can order theSingle Blind AccuPetroTest samplefor the parameter of interest. Tworeal world gasoline samples will besent for the test parameter requestedand a separate sealed envelopecontaining the determined ConsensusValue is also provided. The secondsample is for repeatability testing oras a future QA/QC reference.

Aromatics QC SampleSBPT-AROM $ 25 / 2 x 15 mLParameter Method Approx. RangeTotal Aromatics D-5769 8 - 60 Vol.%

See ASTM Methods D-3606, D-5580-95, D-5769-95 forBenzene Calibration Standards

Benzene/Toluene QC SampleSBPT-BENZ $ 25 / 2 x 15 mLParameter Method Approx. RangeBenzene D-5769 0.1 - 2.0 Vol.%Toluene D-5769 1.0 - 15 Vol.%

See ASTM Methods D-3606, D-5580-95, D-5769-95 forBenzene Calibration Standards

Low Sulfur QC SampleSBPT-LSGAS $ 25 / 2 x 15 mLParameter Method Approx. RangeSulfur 5453 0 - 50 µg/g

Sulfur Single BlindAccuPetroTest AlternativeMatrices StandardsAccuStandard has manufactured anumber of Diesel and White MineralOil quality control products containinga gravimetrically prepared amount ofSulfur. Use of these alternativematrix materials can provide furtherevaluation of the QA/QC process inthe laboratory. Two samples will besent for the test parameter and aseparate sealed envelope containingthe gravimetrically prepared sulfurvalues is also provided. The secondsample is for repeatability testing orfor use as a future QA/QC reference.

Sulfur in White Mineral Oil QC StandardSBPT-SWMO $ 25 / 2 x 15 mLParameter Approx. RangeSulfur 20 - 11000 mg/kg

See ASTM Methods D-2622, D-3120, D-3246-92,D-4294, D-5453 for Sulfur Calibration Standards

Sulfur in Diesel Fuel QC StandardSBPT-SDF $ 25 / 2 x 15 mLParameter Approx. RangeSulfur 20 - 11000 mg/kg

See ASTM Methods D-2622, D-3120, D-3246-92, D-4294, D-5453, for Sulfur Calibration Standards

Olefin QC SampleSBPT-OLEFINSFC $ 25 / 2 x 15 mLParameter Method Approx. RangeOlefins 6550 1 - 40 Vol.%

AccuPetroTest

AccuPetroTest Gasoline

AccuPetroTest Gasoline QC

QC Standards

ASTMSulfur

QA/QC

Page 63: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 5757

Analysis of Ba, Ca, Mg & Zn in Unused Lubricating Oil.See page 46-52 for AccuStandard’s comprehensive line of CertifiedOil Dissolved Wear Metal Calibration Standards.

Traceable Standards for ASTM Methods

Sodium chloride 70 µg/mLCalcium chloride 10 µg/mLMagnesium chloride 20 µg/mL

Mixed Salt SolutionD-3230-89-1 ∆ $ 75 / 100 mLD-3230-89-5 ∆ $ 150 / 500 mLAt stated conc. in Alcohol Solution (1-butanol:MeOH)(63:37) tr. H

2O 3 comps.

ASTM D-3230 Salts in Crude OilOriginally designed for D3230-99

Element Quantity Cat. No. PriceMatrix Conc.Phosphorus 100 mL ICP-41W-1 $ 34H

2O 1000 µg/mL

Phosphorus 500 mL ICP-41W-5 $ 67H

2O 1000 µg/mL

ASTM D-3231 Phosphorus in GasolineOriginally designed for D3231-99D3231 Meets EPA Guidelines for RFG Analysis

Lead Standard Calibration CurveD-3237-CAL-SET ∆ $ 210 / 4 x 100 mLSet includes the following Catalog Numbers:

Cat. No. Price / UnitBlank 1% Aliquot 336/MIBK D-3237-01 ∆ $ 20 / 100 mL0.02 g Pb / gal ( 5.3 mg Pb/ L) D-3237-02 ∆ 80 / 100 mL

in 1% Aliquat 336 / MIBK0.05 g Pb / gal ( 13.2 mg Pb/ L) D-3237-03 ∆ 80 / 100 mL

in 1% Aliquat 336 / MIBK0.10 g Pb / gal ( 26.4 mg Pb/ L) D-3237-04 ∆ 80 / 100 mL

in 1% Aliquat 336 / MIBK

ASTM D-3237 Lead in Gasoline by AA SpectroscopyOriginally designed for D3237-97

Ca (Calcium) 250 µg/mLV (Vanadium) 250 µg/mL

Na (Sodium) 250 µg/mLPb (Lead) 250 µg/mL

D-3605-91 Trace Metals StandardD-3605-91-1 ∆ $ 165 / 1 x 100 mLAt stated conc. in 1,2,3,4-Tetrahydronaphthalene 4 comps.

ASTM D-3605 (Reapproved ‘95) Trace Metals in GasTurbine Fuels by AA & Flame Emission Spectroscopy

Originally designed for D3605-91

Cobalt Oxide StandardD-3610-93-1 $ 50 / 1 x 100 mL

Cobalt oxide @ 1500 µg/mL in Water

ASTM D-3610 Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration

Originally designed for D3610-88 (re-approved 1993)

Manganese Stock SolutionD-3831 ∆ $ 65 / 1 x 100 mL

Manganese @ 1.0 g Mn / gal (264.2 mg Mn / L) in Methyl isobutyl ketone

ASTM D-3831 Manganese in Gasoline by AA SpectroscopyOriginally designed for D3831-98

Lubricating Oil, Elements (Nominal Value) Wt.%ASTM-P-0113-SET $ 2850 / 17 x 100 mL

Ba Ca Mg P S ZnCat. No. (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%) (Wt.%)ASTM-P-0113-01 0.025 0.600 0.100 0.005 0.175 0.060ASTM-P-0113-02 0.000 0.500 0.150 0.200 0.050 0.080ASTM-P-0113-03 0.100 0.400 0.350 0.150 0.300 0.180ASTM-P-0113-04 0.175 0.260 0.225 0.250 0.150 0.120ASTM-P-0113-05 0.150 0.005 0.450 0.005 0.450 0.070ASTM-P-0113-06 0.000 0.400 0.500 0.025 0.350 0.100ASTM-P-0113-07 0.100 0.300 0.325 0.060 0.250 0.120ASTM-P-0113-08 0.200 0.200 0.250 0.100 0.450 0.100ASTM-P-0113-09 0.050 0.060 0.100 0.080 0.300 0.130ASTM-P-0113-10 0.075 0.060 0.400 0.050 0.200 0.050ASTM-P-0113-11 0.010 0.050 0.300 0.120 0.100 0.075ASTM-P-0113-12 0.000 0.025 0.200 0.150 0.200 0.130ASTM-P-0113-13 0.175 0.005 0.375 0.200 0.400 0.150ASTM-P-0113-14 0.005 0.170 0.175 0.250 0.550 0.110ASTM-P-0113-15 0.000 0.100 0.425 0.100 0.200 0.200ASTM-P-0113-16 0.005 0.010 0.275 0.010 0.600 0.250ASTM-P-0113-17 0.000 0.000 0.000 0.000 0.000 0.000

ASTM D-4628 Barium, Calcium, Magnesium & Zinc in Unused Lubricating OilOriginally designed for D4628-97

ASTM D-4628 Barium, Calcium, Magnesium & Zinc

Working Level Standards &Continuing Calibration Check (CCC)

D3237 Meets EPA Guidelines for RFG Analysis

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Page 64: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702558

Traceable Standards for ASTM Methods

Nitrogen Calibration Set for High Boiling SolventsD-4629-91-HB-CAL-SET $ 75 / set of 7 x 1 mL

Cat. No. Description Concentration Price / UnitD-4629-91-HB-0.3X Nitrogen @ 0.3 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-1X Nitrogen @ 1 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-10X Nitrogen @ 10 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-25X Nitrogen @ 25 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-50X Nitrogen @ 50 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-75X Nitrogen @ 75 µg/mL in Toluene $ 20 / 1 x 1 mLD-4629-91-HB-100X Nitrogen @ 100 µg/mL in Toluene $ 20 / 1 x 1 mL

Low level Nitrogen & Sulfur Calibration SetASTM-P-0071-SET $ 50 / 4 x 1 mL

Cat. No. Description UnitASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mL

Low level Nitrogen Calibration SetASTM-P-0070-SET $ 75 / 6 x 1 mL

Cat. No. Description Concentration UnitASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mL

Stock Nitrogen Solution for High Boiling SolventsD-4629-91-HB-CON $ 20 / 1 x 1 mLD-4629-91-HB-CON-PAK SAVE 20% $ 80 / 5 x 1 mL

Nitrogen @ 1000 µg/mL in Toluene : Acetone (9:1)Carbazole @ 11.95 mg/mL in Toluene : Acetone (9:1)

Stock Nitrogen Solution for Low Boiling SolventsD-4629-91-LB-CON $ 20 / 1 x 1 mLD-4629-91-LB-CON-PAK SAVE 20% $ 80 / 5 x 1 mL

Nitrogen @ 1000 µg/mL in Isooctane Pyridine @ 5.65 mg/mL in Isooctane

Nitrogen Calibration Set for Low Boiling SolventsD-4629-91-LB-CAL-SET $ 75 / set of 7 x 1 mL

Cat. No. Description Concentration Price / UnitD-4629-91-LB-0.3X Nitrogen @ 0.3 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-1X Nitrogen @ 1 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-10X Nitrogen @ 10 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-25X Nitrogen @ 25 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-50X Nitrogen @ 50 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-75X Nitrogen @ 75 µg/mL in Isooctane $ 20 / 1 x 1 mLD-4629-91-LB-100X Nitrogen @ 100 µg/mL in Isooctane $ 20 / 1 x 1 mL

Method D4629 is used to determine trace total nitrogen naturally found in liquid hydrocarbons boiling from 50to 400°C with viscosities between 0.2 and 10 cSt. This method monitors feed stocks for nitrogen to preventthe poisoning of some process catalysts when trace nitrogenous materials are present.

Technical NoteNitrogen is introduced usingPyridine.

Technical NoteNitrogen is introducedusing Carbazole.

Technical NoteNitrogen is introducedusing Aniline.

Technical NoteThe Nitrogen isintroduced using Anilineand the Sulfur isintroduced using di-n-Butyl sulfide.

ASTM D-4629 Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet OxidativeCombustion and Chemiluminescence Detection. IP Designation 379/88

Originally designed for D4629-96

Ready-to-Inject PetrochemicalStandards & Calibration Curves

Reduce CostsIncrease Time Spent forSample AnalysisAre Validated AgainstIndependent LotsInclude Internal Standardsor SurrogatesFollow ASTM MethodGuidelinesAllow Direct Transfer toAutosampler Vials

ASTMM

ethods

Page 65: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 59

Traceable Standards for ASTM Methods

See pages 46 to 52 for AccuStandard's comprehensive line of Certified Oil Dissolved Wear Metalcalibration standards designed for XRF Applications.

Stock Chlorine StandardD-4929-94-100X $ 15 / 1 x 5 mLD-4929-94-100X-PAK SAVE $ 60 / 5 x 5 mL

Chlorine @ 1000 µg/mL in Isooctane

Working Level Chlorine StandardD-4929-94 $ 10 / 1 x 5 mLD-4929-94-PAK SAVE $ 40 / 5 x 5 mL

Chlorine @ 10 µg/mL in Isooctane

ASTM D-4929 Organic Chloride Content in Crude Oil - Test Method B Combustion andMicrocoulometry

Originally designed for D4929-99

20 Wear Metal Multi-Element Standardcontaining no metallic sulfonates

Conc.(µg/g) Cat. No. Price10 WM-20-NMS-1X-1 $ 15030 WM-20-NMS-3X-1 15050 WM-20-NMS-5X-1 150

100 WM-20-NMS-10X-1 170300 WM-20-NMS-30X-1 230500 WM-20-NMS-50X-1 350900 WM-20-NMS-90X-1 500

WM-20-NMS-1-SET $ 1450set of above 7 x 100 mL

Recommended Internal Standard (IS)Sulfur free Organometallic (IS) Sulfur free Organometallic (IS)

Element 1000 µg/g Price 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mL

Cobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110

Each Wear Metal Standard contains thebelow list of 20 elements in hydrocarbon oil atthe stated concentration

Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)

Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)

ASTM D-4951 Additive Elements in Lubricating Oils by Inductively Coupled Plasma AtomicEmission Spectrometry

Originally designed for D4951-96

ASTM D-4927 Elemental Analysis of Lubricant and Additive Components - Ba, Ca, P, S and Znby WD-XRF Spectroscopy

Element @ 1000 µg/mL Unit Cat. No. PriceMatrixSilicon 100 mL AA52W-1 $ 13H

2O tr. NaOH 500 mL AA52W-5 33

Sodium 100 mL AA54N-1 ∆ 13HNO

3500 mL AA54N-5 ∆ 33

Vanadium 100 mL AA67N-1 ∆ 13HNO

3500 mL AA67N-5 ∆ 33

Element @ 1000 µg/mL Unit Cat. No. PriceMatrixAluminum 100 mL AA01N-1 ∆ $ 13HNO

3500 mL AA01N-5 ∆ 33

Calcium 100 mL AA09N-1 ∆ 12HNO

3500 mL AA09N-5 ∆ 30

Iron 100 mL AA27N-1 ∆ 12HNO

3500 mL AA27N-5 ∆ 30

Nickel 100 mL AA37N-1 ∆ 12HNO

3500 mL AA37N-5 ∆ 30

ASTM D-5056 Trace Metals in Petroleum Coke by Atomic Absorption Originally designed for D5056-96

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Page 66: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702560

Traceable Standards for ASTM Methods

Internal StandardD-5059-IS-4 $ 80 / 1 x 4 oz

bottleD-5059-IS-10ML-PAK $ 60 / 5 x 10 mL

ampules

Bismuth @ 0.793 mg/mL (3.00 g/US gal) (3.60 g/UK gal) in Mineral oil

Part C - Lead in Gasoline StandardsD-5059-C-CAL-SET ∆ $ 450 / set of 7 x 4 oz

The Set contains the following 7 solutions in isooctaneCat. No. Lead Concentration Price /

g Pb/US gal g Pb/ UK gal µg Pb/mL UnitD-5059-C-01 ∆ 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-C-02 ∆ 0.0010 0.001 0.264 80 / 4 ozD-5059-C-03 ∆ 0.0050 0.006 1.321 80 / 4 ozD-5059-C-04 ∆ 0.0100 0.012 2.642 80 / 4 ozD-5059-C-05 ∆ 0.0500 0.060 13.209 80 / 4 ozD-5059-C-06 ∆ 0.1000 0.120 26.417 80 / 4 ozD-5059-C-07 ∆ 0.3000 0.360 79.252 80 / 4 oz

Part A - Lead in Gasoline StandardsD-5059-A-CAL-SET ∆ $ 450 / set of 7 x 4 oz

The Set contains the following 7 solutions in isooctaneCat. No. Lead Concentration Price /

g Pb/US gal g Pb/ UK gal mg Pb/mL UnitD-5059-A-01 ∆ 0.0000 0.000 0.000 $ 10 / 4 ozD-5059-A-02 ∆ 0.1000 0.120 0.026 80 / 4 ozD-5059-A-03 ∆ 1.0000 1.200 0.264 80 / 4 ozD-5059-A-04 ∆ 2.0000 2.400 0.528 80 / 4 ozD-5059-A-05 ∆ 3.0000 3.600 0.793 80 / 4 ozD-5059-A-06 ∆ 4.0000 4.800 1.057 80 / 4 ozD-5059-A-07 ∆ 5.0000 6.000 1.321 80 / 4 oz

Technical NoteThese standards areformulated to measure the leadcontent in gasoline for both highand low concentrations usingbismuth as an internal standard.For long term stability and easeof use the internal standard isprovided in two convenientpackaging sizes. The bulk 100mL (4 oz.) bottles are designedfor laboratories analyzing manysamples while the 10 mLampules are for laboratoriesthat have limited requests forthe test method. For bulkquantities of the internalstandard packaged in single-use ampules, contact ourtechnical department for aquotation. Bulk volumes of 250mL or more can be sealed intoampules (up to 20 mL size).Use of our ampulling servicescan provide substantial savingsfor the Laboratory.

Technical NoteAll D-5059 Certificates have theconcentrations for the Standard listedin three convenient Lead Concentrationunits.

ASTM D-5059 Lead in Gasoline by X-Ray Spectroscopy IP Designation 228/79Originally designed for D-5059-98

Aluminum Standard SolutionD-5184-91-AL-1 ∆ $ 34 / 1 x 100 mLD-5184-91-AL-5 ∆ $ 67 / 1 x 500 mL

Al @ 1000 µg/mL in 5 % HCl

Silicon Standard SolutionD-5184-91-SI-1 $ 34 / 1 x 100 mLD-5184-91-SI-5 $ 67 / 1 x 500 mL

Silicon @ 1000 µg/mL in trace NaOH

Tartaric Acid / Hydrochloric AcidSolutionD-5184-91-TA-5 ∆ $ 20 / 1 x 500 mL

Tartaric acid @ 0.5% w/v in 4% HCl

Technical NoteContact us by phone/e-mail [email protected] the our TechnicalDepartment for Ready-to-Aspirate working levelcalibration curves designed foryour laboratories' specificcalibration ranges.

ASTM D-5184 (Reapproved 1995) Aluminum and Silicon in Fuel Oils by Ashing, Fusion, ICP-AES Spectrometry & AA Spectrometry

Originally designed for D5184-91

Recommended Internal Standard (IS)Sulfur free Organometallic (IS) Sulfur free Organometallic (IS)

Element @ 1000 µg/g Price @ 5000 µg/g PriceCat. No. 50 mL Cat. No. 50 mL

Cobalt WM-NMS-14 $ 75 WM-NMS-14-5X $ 110

Each Wear Metal Standard containsthe below list of 21 elements in hydrocarbonoil at the stated concentration

Mo (Molybdenum)Na (Sodium)Ni (Nickel)P (Phosphorus)Pb (Lead)Si (Silicon)Sn (Tin)Ti (Titanium)V (Vanadium)Zn (Zinc)

Ag (Silver)Al (Aluminum)B (Boron)Ba (Barium)Ca (Calcium)Cd (Cadmium)Cr (Chromium)Cu (Copper)Fe (Iron)Mg (Magnesium)Mn (Manganese)

21 Wear Metal Multi-Element StandardContaining No Metallic Sulfonates

Conc.(µg/g) Cat. No. Price10 WM-21-NMS-1X-1 $ 16030 WM-21-NMS-3X-1 16050 WM-21-NMS-5X-1 160

100 WM-21-NMS-10X-1 180300 WM-21-NMS-30X-1 240500 WM-21-NMS-50X-1 350

WM-21-NMS-1-SET $ 1050set of above 6 x 100 mL

Technical NoteThis calibration curve has beenformulated with startingmaterials containing no metalsulfonates. So a sulfurcalibration curve can easily bedeveloped using a highconcentration sulfur standard.

ASTM D-5185 Additive Elements, Wear Metals, & Contaminants in Used Lubricating Oils byICP-AES

Originally designed for D5185-97

D5059 Meets EPA Guidelines for RFG Analysis

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Page 67: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 61

Traceable Standards for ASTM Methods

High Level Sulfur SetD-5453-HL-SET $ 90 / 5 x 2 mLThe set contains the following 5 standards in Isooctane

Cat. No. Description UnitD-5453-HL-BL Sulfur Blank 2 mLD-5453-HL-01 Sulfur @ 100 ng/µL 2 mLD-5453-HL-02 Sulfur @ 250 ng/µL 2 mLD-5453-HL-03 Sulfur @ 500 ng/µL 2 mLD-5453-HL-04 Sulfur @ 1000 ng/µL 2 mL

Mid Level Sulfur SetD-5453-ML-SET $ 90 / 6 x 2 mLThe set contains the following 5 standards in Isooctane

Cat. No. Description UnitD-5453-ML-BL Sulfur Blank 2 mLD-5453-ML-01 Sulfur @ 5.0 ng/µL 2 mLD-5453-ML-02 Sulfur @ 25 ng/µL 2 mLD-5453-ML-03 Sulfur @ 50 ng/µL 2 mLD-5453-ML-04 Sulfur @ 100 ng/µL 2 mLD-5453-ML-05 Sulfur @ 200 ng/µL 2 mL

Low Level Sulfur SetD-5453-LL-SET $ 90 / 5 x 2 mLThe set contains the following 5 standards in Isooctane

Cat. No. Description UnitD-5453-LL-BL Sulfur Blank 2 mLD-5453-LL-01 Sulfur @ 0.5 ng/µL 2 mLD-5453-LL-02 Sulfur @ 2.5 ng/µL 2 mLD-5453-LL-03 Sulfur @ 5.0 ng/µL 2 mLD-5453-LL-04 Sulfur @ 10.0 ng/µL 2 mL

Real World Sulfur in VariousGasoline & Fuels QC SamplesSBPT-LSGAS $ 25 / 2 x 15 mLParameter Method Approx .Range

Sulfur D-5453-00 0 - 50 µg/g

ASTM D-5453 Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence

Originally designed for D5453-00

D5453 Meets EPA Guidelinesfor RFG Analysis

NickelSiliconSodiumTitaniumVanadiumZinc

AluminumBariumCalciumIronMagnesiumManganese

Lithium Borate DiluentD-5600-LIB-1 ∆ $ 125 / 1 x 100 mLD-5600-LIB-5 ∆ $ 180 / 1 x 500 mL

2.0% Lithium Borate in 10% HCl

Hydrochloric Acid DiluentD-5600-BLH-5 ∆ $ 50 / 1 x 500 mLD-5600-BLH-L-VAP ∆ $ 65 / L (2 x 500 mL)

20% HCl in ASTM Type II water

Multi-Element Calibration StandardD-5600-01-1 ∆ $ 225 / 1 x 100 mL500 µg/mL each in 2-5% HNO

3tr. HF 12 comps.

Technical NoteD-5600 Ready-to-AspirateStandardsAccuStandard has formulated thefollowing stock standards forASTM Method D-5600. We haveprepared numerous Ready-to-Aspirate ICP multi-elementsolutions. Should your companywant to eliminate the preparationprocess for Inorganic standardscontact our Technical Departmentfor a quote on a Ready-to-Aspirate working level Inorganicstandard.

ASTM D-5600 Trace Metals in Petroleum Coke by ICP-AESOriginally designed for D5600-98

D5059 Meets EPA Guidelines for RFG Analysis

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Tens of thousands of Standards Ready-to-Ship

Page 68: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702562

Traceable Standards for ASTM Methods

Sulfur and Metals in Residual Fuel OilASTM-P-0103-SET $ 2100 / 100 mL

Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price

(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLASTM-P-0103-01 0.00 0 0 0 $ 200ASTM-P-0103-02 0.50 300 10 500 200ASTM-P-0103-03 1.00 500 100 25 200ASTM-P-0103-04 - 100 80 250 200ASTM-P-0103-05 2.00 200 40 100 200ASTM-P-0103-06 2.50 400 5 400 200ASTM-P-0103-07 3.00 0 60 300 200ASTM-P-0103-08 3.50 500 0 200 200ASTM-P-0103-09 - 100 100 0 200ASTM-P-0103-10 4.50 300 50 250 200ASTM-P-0103-11 5.00 200 20 500 200ASTM-P-0103-12 5.50 50 100 50 200

Sulfur and Metals in Mineral OilASTM-P-0102-SET $ 1850 / 100 mL

Sulfur Iron Nickel VanadiumCat. No. Conc. Conc. Conc. Conc. Price

(Wt. %) (µg/g) (µg/g) (µg/g) 100 mLASTM-P-0102-01 0.00 0 0 0 $ 200ASTM-P-0102-02 0.50 300 10 500 200ASTM-P-0102-03 1.00 500 100 25 200ASTM-P-0102-04 - 100 80 250 200ASTM-P-0102-05 2.00 200 40 100 200ASTM-P-0102-06 2.50 400 5 400 200ASTM-P-0102-07 3.00 0 60 300 200ASTM-P-0102-08 3.50 500 0 200 200ASTM-P-0102-09 - 100 100 0 200ASTM-P-0102-10 4.50 300 50 250 200ASTM-P-0102-11 5.00 200 20 500 200ASTM-P-0102-12 5.50 50 100 50 200

Working Level Multi-ElementAqueous StandardD-5708-B-5 ∆ $ 105 / 500 mLEach at 10 µg/mL in 2-5% HNO

33 comps.

IronNickelVanadium

Test Method B - ICP after Acid Decomposition of Sample

Stock Multi-Element inMineral OilD-5708-A-10X $ 150 / 100 mL100 µg/g in 20 cSt mineral oil

3 comps.IronNickelVanadium

Nitric Acid BlankCLP-BLN-5 ∆ $ 30 / 500 mLCLP-BLN-L-SET ∆ $ 45 / 1 L (2 x 500 mL)

5% HNO3

in ASTM Type I Water

Stock Multi-Element AqueousStandardD-5708-B-10X-1 ∆ $ 60 / 100 mLD-5708-B-10X-5 ∆ $ 115 / 500 mLEach at 100 µg/mL in 2-5% HNO

33 comps.

IronNickelVanadium

Test Method A - ICP with an Organic Solvent Specimen Solution

ASTM D-5708 Nickel, Vanadium, & Iron in Crude Oils & Residual Fuels by ICP-AESOriginally designed for D5708-95a

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Custom StandardsWhen you have a need for uniqueAnalytical Standards, let the experts atAccuStandard assist in designing yourformulation. Our technical group, withover 80 years of combined analyticalexperience, will review your request,suggest the most economical and stableformulation, and provide pricing all within24 hours.

For a Quick Quote, copy the customquote form in the back of catalog and faxit back. We will get right back to you.

Plus we typically ship within one weekafter order receipt.

Page 69: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 63

Traceable Standards for ASTM Methods

Low level Nitrogen & Sulfur Calibration SetASTM-P-0071-SET $ 50 / 4 x 1 mL

Cat. No. Description UnitASTM-P-0071-BL Benzene Blank 1 x 1 mLASTM-P-0071-01 Nitrogen @ 0.25 µg/g & Sulfur @ 0.25 µg/g in Benzene 1 x 1 mLASTM-P-0071-02 Nitrogen @ 0.50 µg/g & Sulfur @ 0.50 µg/g in Benzene 1 x 1 mLASTM-P-0071-03 Nitrogen @ 1.00 µg/g & Sulfur @ 1.00 µg/g in Benzene 1 x 1 mL

Low level Nitrogen Calibration SetASTM-P-0070-SET $ 75 / 6 x 1 mL

Cat. No. Description UnitASTM-P-0070-BL Isooctane Blank 1 x 1 mLASTM-P-0070-1X Nitrogen @ 0.5 µg/g in Isooctane 1 x 1 mLASTM-P-0070-2X Nitrogen @ 1.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-4X Nitrogen @ 2.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-10X Nitrogen @ 5.0 µg/g in Isooctane 1 x 1 mLASTM-P-0070-20X Nitrogen @ 10.0 µg/g in Isooctane 1 x 1 mL

Nitrogen Calibration SetD-5762-95-CAL-SET $ 75 / 6 x 1 mL

Cat. No. Description UnitD-5762-95-BL Xylene Blank 1 x 1 mLD-5762-95-1X Nitrogen @ 1.0 µg/mL in Xylene 1 x 1 mLD-5762-95-5X Nitrogen @ 5.0 µg/mL in Xylene 1 x 1 mLD-5762-95-10X Nitrogen @ 10 µg/mL in Xylene 1 x 1 mLD-5762-95-50X Nitrogen @ 50 µg/mL in Xylene 1 x 1 mLD-5762-95-100X Nitrogen @ 100 µg/mL in Xylene 1 x 1 mL

Stock Nitrogen StandardD-5762-95-500X-PAK $ 45 / 5 x 1 mL

Nitrogen @ 500 µg/mL in Xylene (Acridine @ 6397 µg/mL)

Technical NoteNitrogen is introducedusing Aniline.

Technical NoteNitrogen is introducedusing Aniline.

Technical NoteThe Nitrogen is introducedusing Aniline and the Sulfuris introduced usingn-Butyl sulfide.

ASTM D-5762 Nitrogen in Petroleum and Petroleum Products by Boat-InletChemiluminescence

Originally designed for D5762-98

µg/gVanadium 150

µg/mLVanadium 200

µg/mLIron 100 Nickel 200

µg/gSodium 50 Nickel 200

Test Method A - Sample Decomposition with Acid for Total Ni, V and Fe Determination

Individual High Concentration Elements in Aqueous Matrix

Stock Multi-Element Standard inMineral Oil D-5863-95B-10X $ 160 / 1 x 4 ozAt stated conc. in 20 cst Mineral Oil 3 comps.

1,000 µg/mL Conc.Element Matrix Unit Cat. No. PriceIron Fe in HNO

3500 mL ICP-27N-5 ∆ $ 67

Nickel Ni in HNO3

500 mL ICP-37N-5 ∆ 67Vanadium V

2O

5in HNO

3500 mL ICP-67N-5 ∆ 67

Matrix BlankNitric Acid BlankCLP-BLN-5 ∆ $ 30 / 500 mLCLP-BLN-L-SET ∆ SAVE $ 45 / 1 L (2 x 500 mL)

5% HNO3

in ASTM Type I Water

Stock Multi-ElementAqueous StandardD-5863-95A-10X-1 ∆ $ 75 / 1 x 100 mL2-5% HNO

33 comps.

Test Method B - Sample Dilution with Organic Solvent for the Determination of Ni, V andNa using Oil-Soluble Metals as Calibrants.

Standards of InterestSee Wear Metal section for additionalcalibration standards designed for flame AAApplications.

ASTM D-5863 Nickel, Vanadium, Iron, & Sodium in Crude Oils & Residual Fuels by Flame AA Spectrometry

Originally designed for D5863-00

ASTMM

ethods

∆ These products require a Hazardous Shipping Charge

Page 70: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702564

Reference Standards for Solid Waste AnalysisSolid Matrix Standards

AccuStandard offers a broad range of trace element standards in Solid Matrices to meet the requirements for “real world” solid waste referencematerials. All Standards are furnished with a Certificate of Analysis, with the mean values, standard deviations, confidence intervals & performanceintervals. A list of additional elements/analytes, instructions & other pertinent information is also included. Values listed on the Certificate aregenerally the result of round robin analyses consisting of testing conducted by an average of 20 independent laboratories.

Ideal for both AA and ICP AnalysisCertified by EPA Methods and ProtocolsNATURAL Matrix, Not spiked or fortified

Metal Concentration Paint Plating Plating Plating Raw Sewage(in mg/Kg) Sludge Sludge #1 Sludge #2 Sludge #3 (POTW) Sewage Sludge

CRM006-050 CRM009-100 CRM010-100 CRM011-100 CRM018-050 CRM029-050Metal $ 135 / 50g $ 120 / 120g $ 135 / 100g $ 135 / 100g $ 155 / 50g $ 155 / 50gAl (Aluminum) 73 (890) 692 (20) 22,436 18,200Sb (Antimony) ---- (9) ---- (10) ND (2.34)As (Arsenic) ---- (20) ---- (20) 6.63 26.5Ba (Barium) 9,970 (50) 175 (5) 1,103 806Be (Beryllium) ---- ---- ---- ---- 0.30 4.35B (Boron) (53) (150) 102 (18,000) (25.8) (16.6)Cd (Cadmium) 32 (1) ---- (4) 5.57 537Ca (Calcium) 111 (1,100) 563 (180) 49,068 37,300Cr (Chromium) 11 50 79 59,225 40.1 325Co (Cobalt) ---- (7) ---- (10) 3.22 3.07Cu (Copper) (6) 121,415 63,169 108 840 665Fe (Iron) 64 (3,800) 2,699 (4,700) 9,903 8,640Pb (Lead) 753 (14,230) 119,344 269 126 277Mg (Magnesium) 47 (150) (80) (50) 4,302 3,900Mn (Manganese) (1) (40) 17 (30) 200 165Hg (Mercury) ---- (1) (2) (10) 4.78 4.17Mo (Molybdenum) ---- (20) (32) ---- 10.5 8.77Ni (Nickel) (2) 343 194 41,975 20.4 150P (Phosphorus) ---- ---- ---- ---- ---- ----K (Potassium) 8,710 (640) ---- (49,000) 2,657 2,340Se (Selenium) (3) ---- ---- (4) 8.38 19.0Si (Silicon) ---- ---- ---- ---- (609) (782)Ag (Silver) ---- 9 56 (1) 72.1 54.0Na (Sodium) 91 (18,000) 1,576 (23,000) 1,002 1,110Sr (Strontium) (90) (30) ---- (1) 420 (372)TI (Thallium) (40) (30) ---- (20) ND ----Sn (Tin) (100) (38,000) ---- (120) ---- ----Ti (Titanium) (2) (70) ---- (2) ---- ----V (Vanadium) ---- (1) ---- (20) 39.2 30.9Zn (Zinc) 737,431 (40) 183 ---- 1,121 847

All values expressed in mg/Kg, parts per million (ppm) unless otherwise noted.

US EPA SW-846, 3rd Edition Method 3050Method 1311Lead Abatement Program Material

Metal Conc. Soil from Soil from Ash from Soil from Soil from TCLPin mg/L Superfund Site Superfund Site Incinerator Superfund Site Superfund Site Metals in Soil

CRM202-225 CRM204-225 CRM205-225 CRM206-225 CRM207-225 CRM208-225Metal $ 155 / 225 g $ 150 / 225 g $ 150 / 225 g $ 155 / 225 g $ 155 / 225 g $ 155 / 225 gAs (Arsenic) 1.44 0.82 89.5 13.9 9.51 3.93Ba (Barium) 5.85 (0.04) 0.44 0.38 0.40 32.8Cd (Cadmium) 19.6 14.4 144 8.3 7.45 46.7Cr (Chromium) 11.1 4.46 12.7 0.13 1.36 0.87Pb (Lead) 48.5 10.7 155 2.16 2.76 2.14Hg (Mercury) 5.58 (< 0.0025) ND 0.65 0.02 0.62Se (Selenium) 1.38 Trace ND 20.5 20.8 NDAg (Silver) 5.01 (< 0.1) ND 1.04 0.99 ND

NOTES:1. These values are as extracted into Fluid #1.2. All values expressed in mg/L, parts per million (ppm) unless otherwise noted.3. Values in parenthesis are not certified and are given for information only.4. ND is not detected.

Metals in Sludges

TCLP Metals - Method 1311

SolidM

atrix

Page 71: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Tel. 800-442-5290 / 203-786-5290 • Fax 203-786-5287 • Web AccuStandard.com 656565

SolidM

atrix

Metals Conc. Sewage Sludge Soil/ Dry Soil #2 Dry Soil #3 Dry soil #5 Metals inAmended Soil Sediment #4 Certified pH 2.96 plus Cyanide Soil

(in mg/Kg) CRM005-050 CRM008-050 CRM020-050 ** CRM021-100 CRM022-030 CRM028-050Metal $ 150 / 50g $ 150 / 50g $ 150 / 50g $ 150 / 100g $ 155 / 30g $ 150 / 50gAl (Aluminum) 15,333 23,906 2,755 2,725 10,060 7,562Sb (Antimony) ---- (3) 8.38 4,955 (<0.2) ----As (Arsenic) 7 14 400 25 5 3.83Ba (Barium) 853 54 24.8 586 109 73.2Be (Beryllium) 1 1 ---- ---- 0.5 0.38B (Boron) ---- (27) ---- ---- (16) NDCd (Cadmium) 14 (1) 15.4 1 3 0.50Ca (Calcium) 119,477 2,935 25,584 5,426 27,242 5,883Cr (Chromium) 41 48 13.6 11 19 19.0Co (Cobalt) 6 11 4.51 (3) 6 4.30Cu (Copper) 465 36 729 4,792 12 8.51Fe (Iron) 12,650 33,042 191,706 6,481 13,555 10,000Pb (Lead) 89 95 5,111 (144,742) 415 10.4Mg (Magnesium) 6,706 6,742 2,687 (2,367) 9,524 2,995Mn (Manganese) 172 261 945 174 318 209Hg (Mercury) 3 1 1.12 5 (0.02) ----Mo (Molybdenum) 14 (2) ---- ---- (<1) ----Ni (Nickel) 26 26 16.9 13 16 13.4P (Phosphorus) (10,071) ---- ---- ---- ---- ----K (Potassium) 6,229 3,948 (857) 1,006 3,170 2,045Se (Selenium) 20 (1) 6.57 ---- (0.3) NDSi (Silicon) ---- (471) ---- ---- (80) ----Ag (Silver) 36 (1) 38.5 7 (<0.5) ----Na (Sodium) 2,488 8,706 (79.2) 380 268 3.31Sr (Strontium) ---- 42 (24.7) (54) NDTI (Thallium) (2) (<1) 5.91 (<1) (<0.2) ----Sn (Tin) ---- ---- ---- (304) ---- ----Ti (Titanium) ---- ---- ---- ---- ---- ----V (Vanadium) 109 44 6.47 (8.7) 23 19.2Zn (Zinc) 625 134 3,011 546 46 75.0pH ---- ---- 2.96 ---- ---- ----CN ---- ---- ---- ---- 26.6 ----

Reference Standards for Solid Waste AnalysisSolid Matrix Standards

Metals in Soil

Continued Sediment, + CN Sediment Soil Soil Soil Soil Soil(in mg/Kg) CRM015-050 CRM016-050 CRM023-050 CRM025-050 CRM026-030 CRM027-050 CRM024-050Metal $ 150 / 50g $ 150 / 50g $ 150 / 50g $ 150 / 50g $ 150 / 30g $ 150 / 50g $ 150 / 50gAl (Aluminum) 9,200 8,920 8,472 7,637 17,730 9,149 8,681Sb (Antimony) (ND) (ND) ---- (<3.2) (<3.2) ---- (1.17)As (Arsenic) 6.6 6.48 380 339 5.64 12.5 3.42Ba (Barium) 83.0 79.3 75.5 1,839 214 167 79.6Be (Beryllium) 0.47 0.49 0.4 0.33 18.0 ---- 0.43B (Boron) (8.6) (13.0) (11.2) (17.2) (25.4) 2.74 7.22Cd (Cadmium) (ND) 0.47 0.9 369 11.7 11.9 2.15Ca (Calcium) 23,463 22,646 5,425 28,320 6,221 5,963 5,534Cr (Chromium) 14.3 14.5 31.1 441 27.2 27.0 25.4Co (Cobalt) 6.04 5.96 8.9 4.07 6.77 4.77 ----Cu (Copper) 16.1 15.5 4.7 7.76 18.8 9.79 8.70Fe (Iron) 17,070 16,831 10,678 9,439 21,906 11,299 10,196Pb (Lead) 15.04 14.1 213 1,447 25.6 51.7 15.7Mg (Magnesium) 13,611 13,246 3,064 4,376 2,837 2,786 2,945Mn (Manganese) 183.4 180.0 206 173 633 258 199Hg (Mercury) 0.10 0.11 77.8 99.8 2.42 3.85 0.71Mo (Molybdenum) 1.16 (0.97) ---- ---- ---- ---- 0.58Ni (Nickel) 17.5 16.7 11.0 12.2 14.4 10.7 15.0P (Phosphorus) ---- ---- ---- ---- ---- ----K (Potassium) 2,074 1,958 2,231 1,992 3,600 2,115 2,102Se (Selenium) (1.0) (1.0) 116 518 (1.86) 13.8 (0.54)Si (Silicon) (491) (347) (352) (171) (166) 387 (404)Ag (Silver) (ND) (0.7) 132 (0.57) 5.90 ---- 13.3Na (Sodium) 400 292.0 295 313 199 241 287Sr (Strontium) (62) (61) (32) (408) 38.4 42.7 35.4TI (Thallium) (ND) (4.6) 111 (<4.8) (<4.8) ---- (13.6)Sn (Tin) ---- ---- ---- ---- ---- ---- ----Ti (Titanium) ---- ---- ---- ---- ---- ---- ----V (Vanadium) 22.1 22.5 21.7 19.3 32.0 21.8 20.8Zn (Zinc) 69.9 69.7 93.8 51.8 140 51.5 37.3pH ---- ---- ---- ---- ---- ---- ----CN 6.04 ---- ---- ---- ---- ---- ----

Solid Matrix Standards continued on next page

Page 72: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

AccuStandard's Quality System is Certified to comply with ISO 9001 and ISO 1702566

Reference Standards for Solid Waste AnalysisSolid Matrix Standards

NOTES:1. All values expressed in mg/Kg, parts per million(ppm) unless otherwise noted2. Values in parenthesis are not certified and are givenfor information only.3. ND is not detected.

Metals Conc. Activated Diatomaceous Paint Baghousein mg/Kg Charcoal Filter Earth Filter Chips Dust

(in mg/Kg) CRM002-100 CRM004-100 CRM013-050 CRM014-050Metal $ 135 / 100 g $ 135 / 100 g $ 135 / 50 g $ 135 / 50 gAl (Aluminum) (1,800) (29,000) (1,200) (6,000)Sb (Antimony) (2) (5) (20) (20)As (Arsenic) (30) ---- (1) (2)Ba (Barium) (80) 1,595 (1,200) (1,930)Be (Beryllium) ---- ---- ---- ----B (Boron) (80) (1,160) 12 (50)Cd (Cadmium) (1) 2 38 510Ca (Calcium) (980) (28,000) (1,500) (3,900)Cr (Chromium) 36,339 21 618 2,228Co (Cobalt) (10) (140) (10) (10)Cu (Copper) 96,935 (20) (30) (110)Fe (Iron) (1,150) (1,400) (5,860)Pb (Lead) (5) 11,871 643 1,914Mg (Magnesium) (190) (17,000) (430) (1,100)Mn (Manganese) (8) (90) (120) (110)Hg (Mercury) (5) (3) ---- (2)Mo (Molybdenum) ---- (4) (1) (30)Ni (Nickel) (30) (140) (10) (10)P (Phosphorus) ---- ---- ---- ----K (Potassium) (490) ---- (170) (340)Se (Selenium) (4) (2,000) ---- (1)Ag (Silver) 18 (1) ---- (10)Na (Sodium) (480) (4,200) (310) (780)Sr (Strontium) (110) (80) (950) (1,900)TI (Thallium) (20) (30) (4) (10)Sn (Tin) (120) (580) (80) (140)Ti (Titanium) (210) (100) (70) (130)V (Vanadium) (40) (28) (1) (2)Zn (Zinc) ---- (8,500) (2,370) (3,150)

Metals Conc. Ash #1 Ash #2 Ash #3 Ash #4(in mg/Kg) CRM001-100 CRM012-100 CRM019-050 CRM205-225Metal $ 135 / 100 g $ 135 / 100 g $ 135 / 100 g $ 150 / 100 gAl (Aluminum) ---- 2,160 (2, 759) ----Sb (Antimony) ---- ---- (223) ----As (Arsenic) ---- ---- 78 90Ba (Barium) 428 19 342 0.4Be (Beryllium) ---- ---- (2) ----B (Boron) ---- ---- (336) ----Cd (Cadmium) ---- 362 432 147Ca (Calcium) ---- 2,111 (51,949) ----Cr (Chromium) 30 161,520 55 13Co (Cobalt) ---- (22) (26) ----Cu (Copper) 40 3,015 279 ----Fe (Iron) (16,300) 28,664 (12,693) ----Pb (Lead) ---- 120 4,414 155Mg (Magnesium) ---- 1,506 6,307 ----Mn (Manganese) (300) 202 (480) ----Hg (Mercury) ---- ---- (2) NDMo (Molybdenum) ---- ---- (26) ----Ni (Nickel) 20 13,279 22 ----P (Phosphorus) ---- ---- ---- ----K (Potassium) ---- 73,324 (49,344) ----Se (Selenium) ---- ---- 2 NDAg (Silver) ---- 55 6 NDNa (Sodium) ---- 29,200 (50,522) ----Sr (Strontium) (1,016) (10) (173) ----TI (Thallium) ---- ---- (42) ----Sn (Tin) ---- (2,055) (410) ----Ti (Titanium) (465) (20) (2,870) ----V (Vanadium) ---- (52) 29 ----Zn (Zinc) ---- 635 22,217 ----

Natural matrix, not spiked or fortified

Samples tested & suitable for lead abatement program

Paint SludgeCRM006-050 $ 135 / 50 gCertified lead value 753 mg/kg

Paint WasteCRM013-050 $ 135 / 50 gCertified lead value 643 mg/kg

DustCRM014-050 $ 135 / 50 gCertified lead value 1,914 mg/kg

NOTES:1. All values expressed in mg/Kg, parts per million(ppm) unless otherwise noted2. Values in parenthesis are not certified and are givenfor information only.3. ND is not detected.

** Values certified by analysis from 260 independentlaboratories

Metals in Ashes

Lead Reference Materials

Metals in Particulates & Water Treatment Media

SolidM

atrix

Page 73: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive Search Engineavailable and contains over 35,000 products. Search by:

Catalog Number

Component(s) or CAS Number(s)

Method (EPA, ASTM, etc.)

Chemical Category (Organic, Inorganic, Petroleum, etc.)

Other Companies’ Part Number

Log on to AccuStandard.com and see how easy it is.

Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase & click- it's that easy! Discounts may apply to online orders, see detailson website.

On-Line Custom ServicesAccuStandard specializes in synthesizing chemicals of high purity tobe used as reference standards, and offers custom synthesis capabil-ity for milligram to kilogram batches. If you can't find the specificstandard you need, we can prepare Custom Formulations andCustom Packaging for both Inorganic and Organic needs. See ourWebsite for more info.

This is the easier way to get Chemical Reference Standards

e-Standards® from AccuStandard.com

Over 35,000 Standardsjust a click away

On-Line Ordering

Online MSDSs, C of A’s & EPA methods on Demand 24/7Tired of searching for MSDSs, C of A’s and EPA methods?All these documents are available on our website as downloads in PDF format, to view orprint at your convenience.

Get Discounted Shipping if you Order through the Web, see AccuStandard.com fordetails.

Page 74: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

1 IA1.00794 1

H1s

bp: -259.3˚Cd: 0.088 g/l

Hydrogen 2 IIA6.941 3

Li[He] 2s

mp: 180.5˚Cd: 0.53 g/cc

Lithium

9.012182 4

Be[He] 2s2

mp: 1287˚Cd: 1.848 g/cc

Beryllium

22.989768 11

Na[Ne] 3s

mp: 97.72˚Cd: 0.968 g/cc

Sodium

24.3050 12

Mg[Ne] 3s2

mp: 650˚Cd: 1.738 g/cc

Magnesium

4

3 IIIB

4 IVB

5 VB 6 VIB 7 VIIB 8 VIII 9 VIII39.0983 19

K[Ar] 4s

mp: 63.3˚Cd: 0.856 g/cc

Potassium

40.078 20

Ca[Ar] 4s2

mp: 842˚Cd: 1.54 g/cc

Calcium

44.955910 21

Sc[Ar] 3d 4s2

mp: 1541˚Cd: 2.989 g/cc

Scandium

47.88 22

Ti[Ar] 3d2 4s2

mp: 1668˚Cd: 4.506 g/cc

Titanium

50.9415 23

V[Ar] 3d3 4s2

mp: 1910˚Cd: 6.11 g/cc

Vanadium

51.9961 24

Cr[Ar] 3d5 4s

mp: 1907˚Cd: 7.19 g/cc

Chromium

54.93805 25

Mn[Ar] 3d5 4s2

mp: 1246˚Cd: 7.3 g/cc

Manganese

55.847 26

Fe[Ar] 3d6 4s2

mp: 1538˚Cd: 7.87 g/cc

Iron

58.93320 27

Co[Ar] 3d7 4s2

mp: 1495˚Cd: 8.92 g/cc

Cobalt

85.4678 37

Rb[Kr] 5s

mp: 39˚Cd: 1.532 g/cc

Rubidium

87.62 38

Sr[Kr] 5s2

mp: 777˚Cd: 2.64 g/cc

Strontium

88.90585 39

Y[Kr] 4d 5s2

mp: 1522˚Cd: 4.47 g/cc

Yttrium

91.224 40

Zr[Kr] 4d2 5s2

mp: 1855˚Cd: 6.52 g/cc

Zirconium

92.9064 41

Nb[Kr] 4d4 5s

mp: 2477˚Cd: 8.57 g/cc

Niobium

95.94 42

Mo[Kr] 4d5 5s

mp: 2623˚Cd: 10.22 g/cc

Molybdenum

98 43

Tc[Kr] 4d5 5s2

mp: 2157˚Cd: 11.0 g/cc

Technetium

101.07 44

Ru[Kr] 4d7 5s

mp: 2334˚Cd: 12.1 g/cc

Ruthenium

102.9055 45

Rh[Kr] 4d8 5s

mp: 1964˚Cd: 12.41 g/cc

Rhodium

132.9054 55

Cs[Xe] 6s

mp: 28.4˚Cd: 1.93 g/cc

Cesium

137.327 56

Ba[Xe] 6s2

mp: 727˚Cd: 3.62 g/cc

Barium

57-71

La-Lu

178.49 72

Hf[Xe] 4f14 5d2 6s2

mp: 2227˚Cd: 13.31 g/cc

Hafnium

180.9479 73

Ta[Xe] 4f14 5d3 6s2

mp: 2996˚Cd: 16.4 g/cc

Tantalum

183.84 74

W[Xe] 4f14 5d4 6s2

mp: 3410˚Cd: 19.3 g/cc

Tungsten

186.207 75

Re[Xe] 4f14 5d5 6s2

mp: 3180˚Cd: 20.8 g/cc

Rhenium

190.23 76

Os[Xe] 4f14 5d6 6s2

mp: 3045˚Cd: 22.61 g/cc

Osmium

192.22 77

Ir[Xe] 4f14 5d7 6s2

mp: 2410˚Cd: 22.5 g/cc

Iridium

223.0197 87

Fr[Rn] 7s

mp: 27˚Cd: 2.29 g/cc

Francium

226.0254 88

Ra[Rn] 7s2

mp: 700˚Cd: 2.29 g/cc

Radium

89-103

Ac-Lr

261.1087 104

Rf[Rn] 5f14 6d2 7s2

mp: noned: none

Rutherfordium

262.1138 105

Db[Rn] 5f14 6d3 7s2

mp: noned: none

Dubnium

263.1182 106

Sg[Rn] 5f14 6d4 7s2

mp: noned: none

Seaborgium

262.1229 107

Bh[Rn] 5f14 6d5 7s2

mp: noned: none

Bohrium

265 108

Hs[Rn] 5f14 6d6 7s2

mp/bp: noned: none

Hassium

266 109

Mt[Rn] 5f14 6d7 7s2

mp/bp: noned: none

Meitnerium

138.9055 57

La[Xe] 5d 6s2

mp: 920˚Cd: 6.17 g/cc

Lanthanum

140.115 58

Ce[Xe] 4f2 6s2

mp: 798˚Cd: 6.77 g/cc

Cerium

140.90765 59

Pr[Xe] 4f3 6s2

mp: 935˚Cd: 6.77 g/cc

Praseodymium

144.24 60

Nd[Xe] 4f4 6s2

mp: 1021˚Cd: 7.00 g/cc

Neodymium

146.9151 61

Pm[Xe] 4f5 6s2

mp: 1080˚Cd: 7.22 g/cc

Promethium

150.36 62

Sm[Xe] 4f6 6s2

mp: 1072˚Cd: 7.54 g/cc

Samarium

151.965 63

Eu[Xe] 4f7 6s2

mp: 822˚Cd: 5.25 g/cc

Europium

227.0278 89

Ac[Rn] 6d 7s2

mp: 1050˚Cd: 10.07 g/cc

Actinium

232.0381 90

Th[Rn] 6d2 7s2

mp: 1750˚Cd: 11.72 g/cc

Thorium

231.0359 91

Pa[Rn] 5f2 6d 7s2

mp: 1560˚Cd: 15.37 g/cc

Protactinium

238.0289 92

U[Rn] 5f3 6d 7s2

mp: 1132.3˚Cd: 19.07 g/cc

Uranium

237.0482 93

Np[Rn] 5f4 6d 7s2

mp: 637˚Cd: 20.45 g/cc

Neptunium

244.0642 94

Pu[Rn] 5f6 7s2

mp: 641˚Cd: 19.86 g/cc

Plutonium

243.0614 95

Am[Rn] 5f7 7s2

mp: 1173˚Cd: 13.67 g/cc

Americium

Oxidation States listed on next page

207.2 82

Pb[Xe] 4f14 5d10 6s2 6p2

mp: 327.5˚Cd: 11.34 g/cc

Lead

ATOMIC WEIGHT

ATOMIC NUMBER

SYMBOL

ELECTRON CONFIGURATION

BOILING OR MELTING POINT IN ˚C

DENSITY

ELEMENT NAME

Periodic Table of Elements

SOLID

PHYSICAL STATE

LIQUID GAS

NATURALRADIOACTIVE

ARTIFICIALRADIOACTIVE

Page 75: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

18 VIIIA

13 IIIA 14 IVA 15 VA 16 VIA 17 VIIA

4.002602 2

He1s2

bp: -268.9˚Cd: 0.179 g/l

Helium

10.811 5

B[He] 2s2 2pmp: 2075˚Cd: 2.34 g/cc

Boron

12.011 6

C[He] 2s22p2

mp: 3650˚Cd: 2.26 g/cc

Carbon

14.00674 7

N[He] 2s22p3

bp: -195.8˚Cd: 1.25 g/l

Nitrogen

15.9994 8

O[He] 2s22p4

bp: -183.0˚Cd: 1.404 g/l

Oxygen

18.9984032 9

F[He] 2s22p5

bp: -188.1˚Cd: 1.696 g/l

Fluorine

20.1797 10

Ne[He] 2s22p6

bp: -246.1˚Cd: 0.8999 g/l

Neon

10 VIII 11 IB 12 IIB

26.981539 13

Al[Ne] 3s2 3p

mp: 660.4˚Cd: 2.70 g/cc

Aluminum

28.0855 14

Si[Ne] 3s2 3p2

mp: 1414˚Cd: 2.33 g/cc

Silicon

30.973762 15

P[Ne] 3s2 3p3

mp: 44.2˚Cd: 1.82 g/cc

Phosphorus

32.066 16

S[Ne] 3s2 3p4

mp: 115.21˚Cd: 2.07 g/cc

Sulfur

35.4527 17

Cl[Ne] 3s2 3p5

bp: -34.0˚Cd: 2.95 g/l

Chlorine

39.948 18

Ar[Ne] 3s2 3p6

bp: -185.9˚Cd: 1.784 g/l

Argon

58.6934 28

Ni[Ar] 3d8 4s2

mp: 1455˚Cd: 8.908 g/cc

Nickel

63.546 29

Cu[Ar] 3d10 4s

mp: 1083.0˚Cd: 8.84 g/cc

Copper

65.38 30

Zn[Ar] 3d10 4s2

mp: 419.5˚Cd: 7.14 g/cc

Zinc

69.723 31

Ga[Ar] 3d10 4s2 4p

mp: 29.8˚Cd: 5.91 g/cc

Gallium

72.61 32

Ge[Ar] 3d10 4s2 4p2

mp: 937.2˚Cd: 5.32 g/cc

Germanium

74.92159 33

As[Ar] 3d10 4s2 4p3

818˚C subl.d: 5.778 g/cc

Arsenic

78.96 34

Se[Ar] 3d10 4s2 4p4

mp: 217˚Cd: 4.28 g/cc

Selenium

79.904 35

Br[Ar] 3d10 4s2 4p5

bp: 59.47˚Cd: 3.10 g/cc

Bromine

83.80 36

Kr[Ar] 3d10 4s2 4p6

bp: -157.36˚Cd: 3.677 g/cL

Krypton

106.42 46

Pd[Kr] 4d10

mp: 1554.9˚Cd: 12.02 g/cc

Palladium

107.868 47

Ag[Kr] 4d10 5s

mp: 961.8˚Cd: 10.5 g/cc

Silver

112.411 48

Cd[Kr] 4d10 5s2

mp: 321.1˚Cd: 8.69 g/cc

Cadmium

114.818 49

In[Kr] 4d10 5s2 5pmp: 156.6˚Cd: 7.31 g/cc

Indium

118.710 50

Sn[Kr] 4d10 5s2 5p2

mp: 232.0˚Cd: 7.265 g/cc

Tin

121.75 51

Sb[Kr] 4d10 5s2 5p3

mp: 630.7˚Cd: 6.68 g/cc

Antimony

127.60 52

Te[Kr] 4d10 5s2 5p4

mp: 449.5˚Cd: 6.24 g/cc

Tellurium

126.9045 53

I[Kr] 4d10 5s2 5p5

mp: 113.7˚Cd: 4.933 g/cc

Iodine

131.29 54

Xe[Kr] 4d10 5s2 5p6

mp: -111.0˚Cd: 5.761 g/l

Xenon

195.08 78

Pt[Xe] 4f14 5d9 6smp: 1768.4˚Cd: 21.45 g/cc

Platinum

196.96654 79

Au[Xe] 4f14 5d10 6smp: 1064.2˚Cd: 19.32 g/cc

Gold

200.59 80

Hg[Xe] 4f14 5d10 6s2

bp: 356.73˚Cd: 13.534 g/cc

Mercury

204.3833 81

Tl[Xe] 4f14 5d10 6s2 6p

mp: 303.5˚Cd: 11.85 g/cc

Thallium

207.2 82

Pb[Xe] 4f14 5d10 6s2 6p2

mp: 327.5˚Cd: 11.34 g/cc

Lead

208.98037 83

Bi[Xe] 4f14 5d10 6s2 6p3

mp: 271.4˚Cd: 9.79 g/cc

Bismuth

208.9824 84

Po[Xe] 4f14 5d10 6s2 6p4

mp: 254˚Cd: 9.20 g/cc

Polonium

209.9871 85

At[Xe] 4f14 5d10 6s2 6p5

mp: 302˚Cd: none

Astatine

222.0176 86

Rn[Xe] 4f14 5d10 6s2 6p6

mp: -61.8˚Cd: 9.72 g/cc

Radon

269 110

UunUnunnilium

272 111

UuuUnununium

277 112

UubUnunbium

157.25 64

Gd[Xe] 4f7 5d 6s2

mp: 1311˚Cd: 7.89 g/cc

Gadolinium

158.92534 65

Tb[Xe] 4f9 6s2

mp: 1356˚Cd: 8.27 g/cc

Terbium

162.50 66

Dy[Xe] 4f10 6s2

mp: 1409˚Cd: 8.56 g/cc

Dysprosium

164.93032 67

Ho[Xe] 4f11 6s2

mp: 1474˚Cd: 8.78 g/cc

Holmium

167.26 68

Er[Xe] 4f12 6s2

mp: 1529˚Cd: 9.05 g/cc

Erbium

168.9342 69

Tm[Xe] 4f13 6s2

mp: 1545˚Cd: 9.32 g/cc

Thulium

173.04 70

Yb[Xe] 4f14 6s2

mp: 819˚Cd: 6.97 g/cc

Ytterbium

174.967 71

Lu[Xe] 4f14 5d 6s2

mp: 1663˚Cd: 9.84 g/cc

Lutetium

247.0703 96

Cm[Rn] 5f7 6d 7s2

mp: 1345˚Cd: 13.51 g/cc

Curium

247.0703 97

Bk[Rn] 5f9 7s2

mp: 986˚Cd: 14.78 g/cc

Berkelium

251.0796 98

Cf[Rn] 5f10 7s2

mp: 900˚Cd: 15.1 g/cc

Californium

252.0829 99

Es[Rn] 5f11 7s2

mp: 860˚Cd: 8.84 g/cc

Einsteinium

257.0951 100

Fm[Rn] 5f12 7s2

mp: noned: none

Fermium

258.0986 101

Md[Rn] 5f13 7s2

mp: noned: none

Mendelevium

259.1009 102

No[Rn] 5f14 7s2

mp: noned: none

Nobelium

262.11 103

Lr[Rn] 5f14 6d 7s2

mp: noned: none

Lawrencium

Page 76: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Oxidation AtomicElement Symbol States WeightActinium Ac 3 227.0278Aluminum Al 3 26.981539Americium Am 3,4,5,6 243.0614Antimony Sb ±3,5 121.757Argon Ar 39.948Arsenic As ±3,5 74.92159Astatine At ±1,3,5,7 209.9871Barium Ba 2 137.327Berkelium Bk 3,4 247.0703Beryllium Be 2 9.012182Bismuth Bi 3,5 208.98037Bohrium Bh -- 262.1229Boron B 3 10.811Bromine Br ±1,5 79.904Cadmium Cd 2 112.411Calcium Ca 2 40.078Californium Cf 3 251.0796Carbon C 2,±4 12.011Cerium Ce 3,4 140.115Cesium Cs 1 132.90543Chlorine Cl ±1,3,5,7 35.4527Chromium Cr 2,3,6 51.9961Cobalt Co 2,3 58.93320Copper Cu 1,2 63.546Curium Cm 3 247.0703Dubnium Db -- 262.1138Dysprosium Dy 3 162.50Einsteinium Es 3 252.0829Erbium Er 3 167.26Europium Eu 2,3 151.96Fermium Fm 3 257.0951Fluorine F -1 18.9984032Francium Fr 1 223.0197Gadolinium Gd 3 157.25Gallium Ga 3 69.723Germanium Ge 4 72.61Gold Au 1,3 196.96654Hafnium Hf 4 178.49Hassium Hs -- 265Helium He 4.002602Holmium Ho 3 164.93032Hydrogen H 1 1.00794Indium In 3 114.818Iodine I ±1,5,7 126.9045Iridium Ir 2,3,4,6 192.22Iron Fe 2,3 55.847Krypton Kr 83.80Lanthanum La 3 138.9055Lawrencium Lr 3 262.11Lead Pb 2,4 207.2Lithium Li 1 6.941Lutetium Lu 3 174.967Magnesium Mg 2 24.3050Manganese Mn 2,3,4,6,7 54.93805Meitnerium Mt -- 266

Oxidation Atomic Element Symbol States WeightMendelevium Md 2,3 258.0986Mercury Hg 1,2 200.59Molybdenum Mo 2,3,4,5,6 95.94Neodymium Nd 3 144.24Neon Ne 20.1797Neptunium Np 3,4,5,6 237.0482Nickel Ni 2,3 58.6934Niobium Nb 3,5 92.9064Nitrogen N 2,±3,4,5 14.00674Nobelium No 2,3 259.1009Osmium Os 2,3,4,6,8 190.23Oxygen O -2 15.9994Palladium Pd 2,4 106.42Phosphorus P ±3,4,5 30.973762Platinum Pt 2,4 195.08Plutonium Pu 3,4,5,6 244.0642Polonium Po 2,4 208.9871Potassium K 1 39.0983Praseodymium Pr 3,4 140.9151Promethium Pm 3 146.9151Protactinium Pa 4,5 231.0359Radium Ra 2 226.0254Radon Rn 222.0176Rhenium Re -1,2,4,6,7 186.207Rhodium Rh 2,3,4 102.9055Rubidium Rb 1 85.4678Ruthenium Ru 2,3,4,6,8 101.07Rutherfordium Rf 4 261.1087Samarium Sm 2,3 150.36Scandium Sc 3 44.95591Seaborgium Sg -- 263.1182Selenium Se -2,4,6 78.96Silicon Si 4 28.0855Silver Ag 1 107.8682Sodium Na 1 22.989768Strontium Sr 2 87.62Sulfur S ±2,4,6 32.066Tantalum Ta 5 180.9479Technetium Tc 7 98Tellurium Te -2,4,6 127.6Terbium Tb 3,4 158.92534Thallium Tl 1,3 204.3833Thorium Th 4 232.0381Thulium Tm 2,3 168.9342Tin Sn 2,4 118.710Titanium Ti 3,4 47.88Tungsten W 2,3,4,5,6 183.84Uranium U 3,4,5,6 238.0289Vanadium V 2,3,4,5 50.9415Xenon Xe 131.29Ytterbium Yb 2,3 173.04Yttrium Y 3 88.90585Zinc Zn 2 65.38Zirconium Zr 4 91.224

Table of Element Symbol, Oxidation States and Atomic Weights

To Convert Into Multiply By

TemperatureºF ºC 0.556ºC- 17.8ºC ºF 1.8ºC + 32ºC ºK 1.0ºC + 273

LengthMils Microns 25.4Mils Millimeters 0.0254Inches Mils 1000Inches Centimeters 2.54

MassOunces Grams 28.4Pounds Kilograms 0.45Grams Ounces 0.03527Kilograms Pounds 2.2

To Convert Into Multiply By

Liquid VolumeOunces (US) Milliliters 29.57Pints (US) Liters 0.47Quarts (US) Liters 0.95Gallons (US) Liters 3.8Milliliters Ounces (US) 0.034Liters Pints (US) 2.1Liters Quarts (US) 1.06Liters Gallons (US) 0.26Cubic Feet Cubic meters 0.03Cubic Yards Cubic meters 0.76

Universal Gas Constant R = 0.0821(Atm)(L)/(K)(mole)Acceleration Due to Gravity g = 32.17 ft/sec2, 9.8 m/sec2

Avogadro's Constant N = 6.023 x 1023 molecules/mole Speed of Light c = 186,282 miles/sec, 3 x 1010 cm/secHeat of Fusion (water 1 atm, 0ºC) ∆H

fus= 79.7 cal/g

Heat of Vaporization (water 1 atm, 100ºC) ∆Hvap

= 540 cal/gVolume of Perfect Gas 22.4L/mol at 0ºC, 760 torrFaraday's Constant F = 96485.31 C/molPlanck's Constant h = 6.626 x 10-27 erg/secBragg's Law 2d nλ = 2d sin(θ)Absolute Zero -273.15 ºCTemp. of Liquid Nitrogen -195.8 ºC

Technical Info

Oxidation States (bold indicates most stable state, -- = unknownAtomic Mass based on the 12C=12

General ConstantsUnit Conversions

Page 77: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

i

AA01N-1 8, 59AA01N-10X-20ML 8AA01N-25X-20ML 8AA01N-5 8, 59AA02N-1 8AA02N-5 8AA02W-10X-20ML 8AA03N-1 8AA03N-10X-20ML 8AA03N-25X-20ML 8AA03N-5 8AA04N-1 8AA04N-10X-20ML 8AA04N-25X-20ML 8AA04N-5 8AA05N-1 8AA05N-10X-20ML 8AA05N-5 8AA06N-1 8AA06N-10X-20ML 8AA06N-25X-20ML 8AA06N-5 8AA07W-1 8AA07W-10X-20ML 8AA07W-5 8AA08N-1 8AA08N-10X-20ML 8AA08N-25X-20ML 8AA08N-5 8AA09N-1 8, 59AA09N-10X-20ML 8AA09N-25X-20ML 8AA09N-5 8, 59AA11N-1 8AA11N-10X-20ML 8AA11N-25X-20ML 8AA11N-5 8AA12N-1 8AA12N-10X-20ML 8AA12N-25X-20ML 8AA12N-5 8AA13N-1 8AA13N-10X-20ML 8AA13N-25X-20ML 8AA13N-5 8AA14N-1 8AA14N-10X-20ML 8AA14N-5 8AA15N-1 8AA15N-10X-20ML 8AA15N-25X-20ML 8AA15N-5 8AA16N-1 8AA16N-10X-20ML 8AA16N-25X-20ML 8AA17N-1 8AA17N-10X-20ML 8AA17N-25X-20ML 8AA17N-5 8AA18N-1 8AA18N-10X-20ML 8AA18N-25X-20ML 8AA18N-5 8AA19N-1 8AA19N-10X-20ML 8AA19N-25X-20ML 8AA19N-5 8AA20N-1 8AA20N-10X-20ML 8AA20N-5 8AA21W-1 8AA21W-10X-20ML 8AA21W-5 8AA22H-1 8AA22H-10X-20ML 8AA22H-25X-20ML 8AA22H-5 8AA23N-1 8AA23N-10X-20ML 8AA23N-25X-20ML 8AA23N-5 8AA24N-1 9AA24N-10X-20ML 9AA24N-25X-20ML 9AA24N-5 9AA25N-1 9AA25N-10X-20ML 9AA25N-25X-20ML 9AA25N-5 9AA26H-1 9AA26H-10X-20ML 9AA26H-25X-20ML 9AA26H-5 9AA27N-1 9, 59AA27N-10X-20ML 9AA27N-25X-20ML 9AA27N-5 9, 59AA28N-1 9AA28N-10X-20ML 9AA28N-25X-20ML 9AA28N-5 9AA29N-1 9AA29N-10X-20ML 9AA29N-25X-20ML 9AA29N-5 9

AA30N-1 9AA30N-10X-20ML 9AA30N-25X-20ML 9AA30N-5 9AA31N-1 9AA31N-10X-20ML 9AA31N-25X-20ML 9AA31N-5 9AA32N-1 9AA32N-10X-20ML 9AA32N-25X-20ML 9AA32N-5 9AA33N-1 9AA33N-10X-20ML 9AA33N-25X-20ML 9AA33N-5 9AA34N-1 9AA34N-10X-20ML 9AA34N-25X-20ML 9AA34N-5 9AA35W-1 9AA35W-10X-20ML 9AA35W-25X-20ML 9AA35W-5 9AA36N-1 9AA36N-10X-20ML 9AA36N-25X-20ML 9AA36N-5 9AA37N-1 9, 59AA37N-10X-20ML 9AA37N-25X-20ML 9AA37N-5 9, 59AA38W-1 9AA38W-10X-20ML 9AA38W-25X-20ML 9AA38W-5 9AA40H-1 9AA40H-10X-20ML 9AA40H-25X-20ML 9AA40H-5 9AA41W-1 9AA41W-10X-20ML 9AA41W-5 9AA42H-1 9AA42H-10X-20ML 9AA42H-25X-20ML 9AA42H-5 9AA43N-1 9AA43N-10X-20ML 9AA43N-25X-20ML 9AA43N-5 9AA44N-1 9AA44N-10X-20ML 9AA44N-25X-20ML 9AA44N-5 9AA45W-1 9AA45W-10X-20ML 9AA45W-25X-20ML 9AA45W-5 9AA46H-1 9AA46H-10X-20ML 9AA46H-25X-20ML 9AA46H-5 9AA47N-1 10AA47N-10X-20ML 10AA47N-25X-20ML 10AA47N-5 10AA48H-1 10AA48H-10X-20ML 10AA48H-25X-20ML 10AA48H-5 10AA49N-1 10AA49N-10X-20ML 10AA49N-25X-20ML 10AA49N-5 10AA50N-1 10AA50N-10X-20ML 10AA50N-25X-20ML 10AA50N-5 10AA51N-1 10AA51N-10X-20ML 10AA51N-25X-20ML 10AA51N-5 10AA52W-1 10, 59AA52W-10X-20ML 10AA52W-5 10, 59AA53N-1 10AA53N-10X-20ML 10AA53N-25X-20ML 10AA53N-5 10AA54N-1 10, 59AA54N-10X-20ML 10AA54N-25X-20ML 10AA54N-5 10, 59AA55N-1 10AA55N-10X-20ML 10AA55N-25X-20ML 10AA55N-5 10AA56W-1 10AA56W-10X-20ML 10AA56W-25X-20ML 10AA56W-5 10AA57W-1 10AA57W-10X-20ML 10AA57W-25X-20ML 10

AA57W-5 10AA58H-1 10AA58H-10X-20ML 10AA58H-5 10AA59N-1 10AA59N-10X-20ML 10AA59N-25X-20ML 10AA59N-5 10AA60N-1 10AA60N-10X-20ML 10AA60N-25X-20ML 10AA60N-5 10AA61N-1 10AA61N-5 10AA62N-1 10AA62N-10X-20ML 10AA62N-25X-20ML 10AA62N-5 10AA63N-1 10AA63N-10X-20ML 10AA63N-25X-20ML 10AA63N-5 10AA64W-1 10AA64W-10X-20ML 10AA64W-5 10AA65W-1 10AA65W-10X-20ML 10AA65W-5 10AA66N-1 10AA66N-5 10AA67N-1 10, 59AA67N-10X-20ML 10AA67N-25X-20ML 10AA67N-5 10, 59AA68N-1 10AA68N-10X-20ML 10AA68N-25X-20ML 10AA68N-5 10AA69N-1 10AA69N-10X-20ML 10AA69N-25X-20ML 10AA69N-5 10AA70N-1 10AA70N-10X-20ML 10AA70N-25X-20ML 10AA70N-5 10AA71N-1 10AA71N-10X-20ML 10AA71N-25X-20ML 10AA71N-5 10ASTM-FUEL-QCS-01-PAK 56ASTM-FUEL-QCS-02-PAK 56ASTM-P-0010-PAK 54ASTM-P-0020-PAK 54ASTM-P-0070-SET 58, 63ASTM-P-0071-SET 58, 63ASTM-P-0100-SET 49ASTM-P-0101-SET 49ASTM-P-0102-01 62ASTM-P-0102-02 62ASTM-P-0102-03 62ASTM-P-0102-04 62ASTM-P-0102-05 62ASTM-P-0102-06 62ASTM-P-0102-07 62ASTM-P-0102-08 62ASTM-P-0102-09 62ASTM-P-0102-10 62ASTM-P-0102-11 62ASTM-P-0102-12 62ASTM-P-0102-SET 49, 62ASTM-P-0103-01 62ASTM-P-0103-02 62ASTM-P-0103-03 62ASTM-P-0103-04 62ASTM-P-0103-05 62ASTM-P-0103-06 62ASTM-P-0103-07 62ASTM-P-0103-08 62ASTM-P-0103-09 62ASTM-P-0103-10 62ASTM-P-0103-11 62ASTM-P-0103-12 62ASTM-P-0103-SET 49, 62ASTM-P-0104-SET 49ASTM-P-0105-SET 49ASTM-P-0106-SET 49ASTM-P-0107-5 49ASTM-P-0108-SET 50ASTM-P-0109-SET 50ASTM-P-0110-SET 50ASTM-P-0111-SET 50ASTM-P-0112-SET 50ASTM-P-0113-SET 50, 57ASTM-P-0114-SET 51ASTM-P-0115-SET 51ASTM-P-0116-SET 51ASTM-P-0117-SET 51ASTM-P-0118-SET 51ASTM-P-0119-SET 52ASTM-P-0120-SET 52ASTM-P-0121-SET 52ASTM-P-0122-0.5 47, 52ASTM-P-0122-1 47, 52ASTM-P-0123-0.5 47, 52

ASTM-P-0123-1 47, 52ASTM-P-0124-0.5 52ASTM-P-0124-1 52ASTM-P-0125-0.5 52ASTM-P-0125-1 52CLP-AA-SET 11, 32CLP-BLH-5 5, 11, 25, 29CLP-BLH-L-SET 5, 11, 25, 29CLP-BLMA-5 5, 11, 25, 29CLP-BLMA-L-SET 5, 11, 25, 29CLP-BLN-5 5, 11, 25, 29, 62, 63CLP-BLN-L-SET 5, 11, 25, 29, 62, 63CLP-BLW-5 5, 11, 25, 29CLP-BLW-L-SET 5, 11, 25, 29CLP-CAL-01-1 29CLP-CAL-02-1 29CLP-CAL-03-1 29CLP-CAL-04-1 29CLP-CAL-05-1 29CLP-CAL-06-1 29CLP-CAL-07-1 29CLP-CAL-1-SET 29, 32CLP-CAL-AA 11, 32CLP-CCV-01-1 30CLP-CCV-01-5 30CLP-CCV-02-1 30CLP-CCV-02-5 30CLP-CCV-03-1 30CLP-CCV-03-5 30CLP-CCV-1-SET 30CLP-CCV-5-SET 30CLP-CRDL-01-1 31CLP-CRDL-02-1 31CLP-CRDL-1-SET 31, 32CLP-HG-AA 11, 32CLP-IA-1-SET 31, 32CLP-IA-5-SET 31CLP-ICV-01-1 30CLP-ICV-01-5 30CLP-ICV-01-R-1 30CLP-ICV-01-R-5 30CLP-ICV-AA 11, 32CLP-KIT 32CLP-PAN-01-1 31CLP-PAN-01-5 31CLP-PAN-02-1 31CLP-PAN-02-5 31CLP-PIN-01-1 31, 38CLP-PIN-01-5 31, 38CLP-PIN-02-1 31, 38CLP-PIN-02-5 31, 38CLP-SP1-AA 11, 32CLP-SP2-AA 11, 32CLP-SPS-01-1 30CLP-SPS-02-1 30CLP-SPS-1-SET 30, 32CLP-VER-1-SET 30, 32CLP-VER-5-SET 30CLP-VER-R-1-SET 30CLP-VER-R-5-SET 30CRM001-100 66CRM002-100 66CRM004-100 66CRM005-050 65CRM006-050 64, 66CRM008-050 65CRM009-100 64CRM010-100 64CRM011-100 64CRM012-100 66CRM013-050 66CRM014-050 66CRM015-050 65CRM016-050 65CRM018-050 64CRM019-050 66CRM020-050 65CRM021-100 65CRM022-030 65CRM023-050 65CRM024-050 65CRM025-050 65CRM026-030 65CRM027-050 65CRM028-050 65CRM029-050 64CRM202-225 64CRM204-225 64CRM205-225 64, 66CRM206-225 64CRM207-225 64CRM208-225 64D-2622-LL-1000X-4 55D-2622-LL-100X-4 55D-2622-LL-10X-4 55D-2622-LL-1100X-4 55D-2622-LL-1200X-4 55D-2622-LL-200X-4 55D-2622-LL-300X-4 55D-2622-LL-30X-4 55D-2622-LL-400X-4 55D-2622-LL-500X-4 55D-2622-LL-50X-4 55D-2622-LL-5X-4 55D-2622-LL-600X-4 55

D-2622-LL-700X-4 55D-2622-LL-75X-4 55D-2622-LL-800X-4 55D-2622-LL-900X-4 55D-2622-LL-BL-4 55D-2622-LL-CAL-SET 55D-3120-92-CAL-SET 55D-3230-89-1 57D-3230-89-5 57D-3237-01 57D-3237-02 57D-3237-03 57D-3237-04 57D-3237-CAL-SET 57D-3605-91-1 57D-3610-93-1 57D-3831 57D-4629-91-HB-0.3X 58D-4629-91-HB-100X 58D-4629-91-HB-10X 58D-4629-91-HB-1X 58D-4629-91-HB-25X 58D-4629-91-HB-50X 58D-4629-91-HB-75X 58D-4629-91-HB-CAL-SET 58D-4629-91-HB-CON 58D-4629-91-HB-CON-PAK 58D-4629-91-LB-0.3X 58D-4629-91-LB-100X 58D-4629-91-LB-10X 58D-4629-91-LB-1X 58D-4629-91-LB-25X 58D-4629-91-LB-50X 58D-4629-91-LB-75X 58D-4629-91-LB-CAL-SET 58D-4629-91-LB-CON 58D-4629-91-LB-CON-PAK 58D-4929-94 59D-4929-94-100X 59D-4929-94-100X-PAK 59D-4929-94-PAK 59D-5059-A-01 60D-5059-A-02 60D-5059-A-03 60D-5059-A-04 60D-5059-A-05 60D-5059-A-06 60D-5059-A-07 60D-5059-A-CAL-SET 60D-5059-C-01 60D-5059-C-02 60D-5059-C-03 60D-5059-C-04 60D-5059-C-05 60D-5059-C-06 60D-5059-C-07 60D-5059-C-CAL-SET 60D-5059-IS-10ML-PAK 60D-5059-IS-4 60D-5184-91-AL-1 60D-5184-91-AL-5 60D-5184-91-SI-1 60D-5184-91-SI-5 60D-5184-91-TA-5 60D-5453-HL-SET 61D-5453-LL-SET 61D-5453-ML-SET 61D-5600-01-1 61D-5600-BLH-5 61D-5600-BLH-L-VAP 61D-5600-LIB-1 61D-5600-LIB-5 61D-5708-A-10X 62D-5708-B-10X-1 62D-5708-B-10X-5 62D-5708-B-5 62D-5762-95-500X-PAK 63D-5762-95-CAL-SET 63D-5863-95A-10X-1 63D-5863-95B-10X 63DINENISO-11885-1-SET 28DINENISO-11885-5-SET 28IC-ACET-10X-1 12IC-ACET-10X-5 12IC-ACET-1X-1 12IC-ACET-1X-5 12IC-AN-10X-1-SET 12IC-AN-10X-5-SET 12IC-AN-1X-1-SET 12IC-AN-1X-5-SET 12IC-AN-2X-1-SET 12IC-AN-2X-5-SET 12IC-AN-R-10X-1-SET 13IC-AN-R-10X-5-SET 13IC-BA-10X-1 15IC-BA-10X-5 15IC-BA-1X-1 15IC-BA-1X-5 15IC-BA-2X-1 15IC-BA-2X-5 15IC-BR-10X-1 12, 17, 18IC-BR-10X-5 12IC-BR-1X-1 12, 18IC-BR-1X-5 12IC-BR-2X-1 12, 18

Catalog Number Index

Page 78: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

ii

IC-BR-2X-5 12IC-BROM-10X-1 12, 18IC-BROM-10X-5 12IC-CA-10X-1 15IC-CA-10X-5 15IC-CA-1X-1 15IC-CA-1X-5 15IC-CA-2X-1 15IC-CA-2X-5 15IC-CAT-10X-1-SET 15IC-CAT-10X-5-SET 15IC-CAT-1X-1-SET 15IC-CAT-1X-5-SET 15IC-CAT-2X-1-SET 15IC-CAT-2X-5-SET 15IC-CHLR-10X-1 12IC-CHLR-10X-5 12IC-CHLR-1X-1 12IC-CHLR-1X-5 12IC-CHLT-10X-1 12, 18IC-CHLT-10X-5 12IC-CHLT-1X-1 12IC-CHLT-1X-5 12IC-CHRM-10X-1 12IC-CHRM-10X-5 12IC-CHRM-1X-1 12IC-CHRM-1X-5 12IC-CITR-10X-1 12IC-Cl-10X-1 12, 17, 18IC-Cl-10X-5 12IC-Cl-1X-1 12, 18IC-Cl-1X-5 12IC-Cl-2X-1 12, 18IC-Cl-2X-5 12IC-ELU-01-0.5 14IC-ELU-01-0.5-PAK 14IC-ELU-01-1 14IC-ELU-01-1-PAK 14IC-ELU-02-0.5 14IC-ELU-02-0.5-PAK 14IC-ELU-02-1 14IC-ELU-02-1-PAK 14IC-ELU-03-0.5 14IC-ELU-03-0.5-PAK 14IC-ELU-03-1 14IC-ELU-03-1-PAK 14IC-F-10X-1 12, 17IC-F-10X-5 12IC-F-1X-1 12IC-F-1X-5 12IC-F-2X-1 12IC-F-2X-5 12IC-FORM-10X-1 12IC-FORM-10X-5 12IC-FORM-1X-1 12IC-FORM-1X-5 12IC-GLYC-10X-1 12IC-I-10X-1 12, 17IC-K-10X-1 15IC-K-10X-5 15IC-K-1X-1 15IC-K-1X-5 15IC-K-2X-1 15IC-K-2X-5 15IC-LACT-10X-1 12IC-LI-10X-1 15IC-LI-10X-5 15IC-LI-1X-1 15IC-LI-1X-5 15IC-LI-2X-1 15IC-LI-2X-5 15IC-MALA-10X-1 12IC-MALE-10X-1 12IC-MAN-01-1 13IC-MAN-02-1 13IC-MAN-03-1 13IC-MAN-04-1 13IC-MAN-05-R1-1 13IC-MAN-06-R1-1 13IC-MAN-07-R1-1 13IC-MAN-08-R1-1 13IC-MAN-09-R1-1 13IC-MAN-10-R1-1 13IC-MAN-11-1 14IC-MAN-12-1 14IC-MAN-13-1 14IC-MAN-14-R2-1 14, 17IC-MAN-14-R3-1 14IC-MAN-15-R2-1 14IC-MAN-16-R1-1 14IC-MAN-17-R1-1 14IC-MAN-18-R1-1 14IC-MAN-CAL-SET 13IC-MCA-01-1 15IC-MCA-02-1 15IC-MCA-03-1 15IC-MCA-04-1 15IC-MCA-05-1 15IC-MCA-06-1 15IC-MG-10X-1 15IC-MG-10X-5 15IC-MG-1X-1 15IC-MG-1X-5 15IC-MG-2X-1 15IC-MG-2X-5 15IC-NA-10X-1 15IC-NA-10X-5 15IC-NA-1X-1 15IC-NA-1X-5 15IC-NA-2X-1 15

IC-NA-2X-5 15IC-NH4-10X-1 15, 18IC-NH4-10X-5 15IC-NH4-1X-1 15, 18IC-NH4-1X-5 15IC-NH4-2X-1 15, 18IC-NH4-2X-5 15IC-NH4-N-10X-1 13, 17, 18IC-NH4-N-10X-5 13IC-NH4-N-1X-1 13, 18IC-NH4-N-1X-5 13IC-NO2-0.1X-1 14IC-NO2-10X-1 12, 14, 18IC-NO2-10X-5 12IC-NO2-1X-1 12, 14, 18IC-NO2-1X-5 12IC-NO2-2X-1 12, 18IC-NO2-2X-5 12IC-NO2-N-10X-1 13, 17, 18IC-NO2-N-10X-5 13IC-NO2-N-1X-1 13, 14, 18IC-NO2-N-1X-5 13IC-NO3-10X-1 12IC-NO3-10X-5 12IC-NO3-1X-1 12IC-NO3-1X-5 12IC-NO3-2X-1 12IC-NO3-2X-5 12IC-NO3-N-10X-1 13, 17IC-NO3-N-10X-5 13IC-NO3-N-1X-1 13IC-NO3-N-1X-5 13IC-OXAL-10X-1 12IC-OXAL-10X-5 12IC-OXAL-1X-1 12IC-OXAL-1X-5 12IC-PER-10X-1 12, 14, 18IC-PHTH-10X-1 12IC-PO4-10X-1 12IC-PO4-10X-5 12IC-PO4-1X-1 12IC-PO4-1X-5 12IC-PO4-2X-1 12IC-PO4-2X-5 12IC-PO4-P-10X-1 13, 17IC-PO4-P-10X-5 13IC-PO4-P-1X-1 13IC-PO4-P-1X-5 13IC-PROP-10X-1 12IC-SO4-10X-1 12, 17IC-SO4-10X-5 12IC-SO4-1X-1 12IC-SO4-1X-5 12IC-SO4-2X-1 12IC-SO4-2X-5 12IC-SO4-S-10X-1 13IC-SO4-S-10X-5 13IC-SO4-S-1X-1 13IC-SO4-S-1X-5 13IC-SR-10X-1 15IC-SR-10X-5 15IC-SR-1X-1 15IC-SR-1X-5 15IC-SR-2X-1 15IC-SR-2X-5 15IC-SUCC-10X-1 12IC-TART-10X-1 12ICP-01N-1 1ICP-01N-10X-0.5 1ICP-01N-10X-1 1ICP-01N-10X-20ML 1ICP-01N-10X-5 1ICP-01N-25X-20ML 1ICP-01N-5 1ICP-02N-1 1ICP-02N-10X-0.5 1ICP-02N-10X-1 1ICP-02N-10X-20ML 1ICP-02N-10X-5 1ICP-02N-5 1ICP-03N-1 1ICP-03N-10X-0.5 1ICP-03N-10X-1 1ICP-03N-10X-20ML 1ICP-03N-10X-5 1ICP-03N-25X-20ML 1ICP-03N-5 1ICP-04N-1 1ICP-04N-10X-0.5 1ICP-04N-10X-1 1ICP-04N-10X-20ML 1ICP-04N-10X-5 1ICP-04N-25X-20ML 1ICP-04N-5 1ICP-05N-1 1ICP-05N-10X-0.5 1ICP-05N-10X-1 1ICP-05N-10X-20ML 1ICP-05N-10X-5 1ICP-05N-5 1ICP-06N-1 1ICP-06N-10X-0.5 1ICP-06N-10X-1 1ICP-06N-10X-20ML 1ICP-06N-10X-5 1ICP-06N-25X-20ML 1ICP-06N-5 1ICP-07W-1 1ICP-07W-10X-0.5 1ICP-07W-10X-1 1

ICP-07W-10X-20ML 1ICP-07W-10X-5 1ICP-07W-5 1ICP-08N-1 2ICP-08N-10X-0.5 2ICP-08N-10X-1 2ICP-08N-10X-20ML 2ICP-08N-10X-5 2ICP-08N-25X-20ML 2ICP-08N-5 2ICP-09N-1 2ICP-09N-10X-0.5 2ICP-09N-10X-1 2ICP-09N-10X-20ML 2ICP-09N-10X-5 2ICP-09N-25X-20ML 2ICP-09N-5 2ICP-11N-1 2ICP-11N-10X-0.5 2ICP-11N-10X-1 2ICP-11N-10X-20ML 2ICP-11N-10X-5 2ICP-11N-25X-20ML 2ICP-11N-5 2ICP-12N-1 2ICP-12N-10X-0.5 2ICP-12N-10X-1 2ICP-12N-10X-20ML 2ICP-12N-10X-5 2ICP-12N-25X-20ML 2ICP-12N-5 2ICP-13N-1 2ICP-13N-10X-0.5 2ICP-13N-10X-1 2ICP-13N-10X-20ML 2ICP-13N-10X-5 2ICP-13N-25X-20ML 2ICP-13N-5 2ICP-14N-1 2ICP-14N-10X-0.5 2ICP-14N-10X-1 2ICP-14N-10X-20ML 2ICP-14N-10X-5 2ICP-14N-25X-20ML 2ICP-14N-5 2ICP-15N-1 2ICP-15N-10X-0.5 2ICP-15N-10X-1 2ICP-15N-10X-20ML 2ICP-15N-10X-5 2ICP-15N-25X-20ML 2ICP-15N-5 2ICP-16N-1 2ICP-16N-10X-0.5 2ICP-16N-10X-1 2ICP-16N-10X-20ML 2ICP-16N-10X-5 2ICP-16N-25X-20ML 2ICP-16N-5 2ICP-17N-1 2ICP-17N-10X-0.5 2ICP-17N-10X-1 2ICP-17N-10X-20ML 2ICP-17N-10X-5 2ICP-17N-25X-20ML 2ICP-17N-5 2ICP-18N-1 2ICP-18N-10X-0.5 2ICP-18N-10X-1 2ICP-18N-10X-20ML 2ICP-18N-10X-5 2ICP-18N-25X-20ML 2ICP-18N-5 2ICP-19N-1 2ICP-19N-10X-0.5 2ICP-19N-10X-1 2ICP-19N-10X-20ML 2ICP-19N-10X-5 2ICP-19N-25X-20ML 2ICP-19N-5 2ICP-20N-1 2ICP-20N-10X-0.5 2ICP-20N-10X-1 2ICP-20N-10X-20ML 2ICP-20N-10X-5 2ICP-20N-5 2ICP-21W-1 2ICP-21W-10X-0.5 2ICP-21W-10X-1 2ICP-21W-10X-20ML 2ICP-21W-10X-5 2ICP-21W-5 2ICP-22H-1 2ICP-22H-10X-0.5 2ICP-22H-10X-1 2ICP-22H-10X-20ML 2ICP-22H-10X-5 2ICP-22H-25X-20ML 2ICP-22H-5 2ICP-23N-1 2ICP-23N-10X-0.5 2ICP-23N-10X-1 2ICP-23N-10X-20ML 2ICP-23N-10X-5 2ICP-23N-25X-20ML 2ICP-23N-5 2ICP-24N-1 2ICP-24N-10X-0.5 2ICP-24N-10X-1 2ICP-24N-10X-20ML 2

ICP-24N-10X-5 2ICP-24N-25X-20ML 2ICP-24N-5 2ICP-25N-1 2ICP-25N-10X-0.5 2ICP-25N-10X-1 2ICP-25N-10X-20ML 2ICP-25N-10X-5 2ICP-25N-25X-20ML 2ICP-25N-5 2ICP-26H-1 3ICP-26H-10X-0.5 3ICP-26H-10X-1 3ICP-26H-10X-20ML 3ICP-26H-10X-5 3ICP-26H-25X-20ML 3ICP-26H-5 3ICP-27N-1 3ICP-27N-10X-0.5 3ICP-27N-10X-1 3ICP-27N-10X-20ML 3ICP-27N-10X-5 3ICP-27N-25X-20ML 3ICP-27N-5 3, 63ICP-28N-1 3ICP-28N-10X-0.5 3ICP-28N-10X-1 3ICP-28N-10X-20ML 3ICP-28N-10X-5 3ICP-28N-25X-20ML 3ICP-28N-5 3ICP-29N-1 3ICP-29N-10X-0.5 3ICP-29N-10X-1 3ICP-29N-10X-20ML 3ICP-29N-10X-5 3ICP-29N-25X-20ML 3ICP-29N-5 3ICP-30N-1 3ICP-30N-10X-0.5 3ICP-30N-10X-1 3ICP-30N-10X-20ML 3ICP-30N-10X-5 3ICP-30N-25X-20ML 3ICP-30N-5 3ICP-31N-1 3ICP-31N-10X-0.5 3ICP-31N-10X-1 3ICP-31N-10X-20ML 3ICP-31N-10X-5 3ICP-31N-25X-20ML 3ICP-31N-5 3ICP-32N-1 3ICP-32N-10X-0.5 3ICP-32N-10X-1 3ICP-32N-10X-20ML 3ICP-32N-10X-5 3ICP-32N-25X-20ML 3ICP-32N-5 3ICP-33N-1 3ICP-33N-10X-0.5 3ICP-33N-10X-1 3ICP-33N-10X-20ML 3ICP-33N-10X-5 3ICP-33N-25X-20ML 3ICP-33N-5 3ICP-34N-1 3ICP-34N-10X-0.5 3ICP-34N-10X-1 3ICP-34N-10X-20ML 3ICP-34N-10X-5 3ICP-34N-25X-20ML 3ICP-34N-5 3ICP-35W-1 3ICP-35W-10X-0.5 3ICP-35W-10X-1 3ICP-35W-10X-20ML 3ICP-35W-10X-5 3ICP-35W-25X-20ML 3ICP-35W-5 3ICP-36N-1 3ICP-36N-10X-0.5 3ICP-36N-10X-1 3ICP-36N-10X-20ML 3ICP-36N-10X-5 3ICP-36N-25X-20ML 3ICP-36N-5 3ICP-37N-1 3ICP-37N-10X-0.5 3ICP-37N-10X-1 3ICP-37N-10X-20ML 3ICP-37N-10X-5 3ICP-37N-25X-20ML 3ICP-37N-5 3, 63ICP-38W-1 3ICP-38W-10X-0.5 3ICP-38W-10X-1 3ICP-38W-10X-20ML 3ICP-38W-10X-5 3ICP-38W-25X-20ML 3ICP-38W-5 3ICP-40H-1 3ICP-40H-10X-0.5 3ICP-40H-10X-1 3ICP-40H-10X-20ML 3ICP-40H-10X-5 3ICP-40H-25X-20ML 3ICP-40H-5 3ICP-41W-1 3, 57ICP-41W-10X-0.5 3

ICP-41W-10X-1 3ICP-41W-10X-20ML 3ICP-41W-10X-5 3ICP-41W-5 3, 57ICP-42H-1 3ICP-42H-10X-0.5 3ICP-42H-10X-1 3ICP-42H-10X-20ML 3ICP-42H-10X-5 3ICP-42H-25X-20ML 3ICP-42H-5 3ICP-43N-1 3ICP-43N-10X-0.5 3ICP-43N-10X-1 3ICP-43N-10X-20ML 3ICP-43N-10X-5 3ICP-43N-25X-20ML 3ICP-43N-5 3ICP-44N-1 3ICP-44N-10X-0.5 3ICP-44N-10X-1 3ICP-44N-10X-20ML 3ICP-44N-10X-5 3ICP-44N-25X-20ML 3ICP-44N-5 3ICP-45W-1 4ICP-45W-10X-0.5 4ICP-45W-10X-1 4ICP-45W-10X-20ML 4ICP-45W-10X-5 4ICP-45W-25X-20ML 4ICP-45W-5 4ICP-46H-1 4ICP-46H-10X-0.5 4ICP-46H-10X-1 4ICP-46H-10X-20ML 4ICP-46H-10X-5 4ICP-46H-25X-20ML 4ICP-46H-5 4ICP-47N-1 4ICP-47N-10X-0.5 4ICP-47N-10X-1 4ICP-47N-10X-20ML 4ICP-47N-10X-5 4ICP-47N-25X-20ML 4ICP-47N-5 4ICP-48H-1 4ICP-48H-10X-0.5 4ICP-48H-10X-1 4ICP-48H-10X-20ML 4ICP-48H-10X-5 4ICP-48H-25X-20ML 4ICP-48H-5 4ICP-49N-1 4ICP-49N-10X-0.5 4ICP-49N-10X-1 4ICP-49N-10X-20ML 4ICP-49N-10X-5 4ICP-49N-25X-20ML 4ICP-49N-5 4ICP-50N-1 4ICP-50N-10X-0.5 4ICP-50N-10X-1 4ICP-50N-10X-20ML 4ICP-50N-10X-5 4ICP-50N-25X-20ML 4ICP-50N-5 4ICP-51N-1 4ICP-51N-10X-0.5 4ICP-51N-10X-1 4ICP-51N-10X-20ML 4ICP-51N-10X-5 4ICP-51N-25X-20ML 4ICP-51N-5 4ICP-52W-1 4ICP-52W-10X-0.5 4ICP-52W-10X-1 4ICP-52W-10X-20ML 4ICP-52W-10X-5 4ICP-52W-5 4ICP-53N-1 4ICP-53N-10X-0.5 4ICP-53N-10X-1 4ICP-53N-10X-20ML 4ICP-53N-10X-5 4ICP-53N-25X-20ML 4ICP-53N-5 4ICP-54N-1 4ICP-54N-10X-0.5 4ICP-54N-10X-1 4ICP-54N-10X-20ML 4ICP-54N-10X-5 4ICP-54N-25X-20ML 4ICP-54N-5 4ICP-55N-1 4ICP-55N-10X-0.5 4ICP-55N-10X-1 4ICP-55N-10X-20ML 4ICP-55N-10X-5 4ICP-55N-25X-20ML 4ICP-55N-5 4ICP-56W-1 4ICP-56W-10X-0.5 4ICP-56W-10X-1 4ICP-56W-10X-20ML 4ICP-56W-10X-5 4ICP-56W-25X-20ML 4ICP-56W-5 4ICP-57W-1 4ICP-57W-10X-0.5 4

Page 79: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

iii

ICP-57W-10X-1 4ICP-57W-10X-20ML 4ICP-57W-10X-5 4ICP-57W-25X-20ML 4ICP-57W-5 4ICP-58H-1 4ICP-58H-10X-0.5 4ICP-58H-10X-1 4ICP-58H-10X-20ML 4ICP-58H-10X-5 4ICP-58H-5 4ICP-59N-1 4ICP-59N-10X-0.5 4ICP-59N-10X-1 4ICP-59N-10X-20ML 4ICP-59N-10X-5 4ICP-59N-25X-20ML 4ICP-59N-5 4ICP-60N-1 4ICP-60N-10X-0.5 4ICP-60N-10X-1 4ICP-60N-10X-20ML 4ICP-60N-10X-5 4ICP-60N-25X-20ML 4ICP-60N-5 4ICP-61N-1 4ICP-61N-5 4ICP-62N-1 5ICP-62N-10X-0.5 5ICP-62N-10X-1 5ICP-62N-10X-20ML 5ICP-62N-10X-5 5ICP-62N-25X-20ML 5ICP-62N-5 5ICP-63N-1 5ICP-63N-10X-0.5 5ICP-63N-10X-1 5ICP-63N-10X-20ML 5ICP-63N-10X-5 5ICP-63N-25X-20ML 5ICP-63N-5 5ICP-64W-1 5ICP-64W-10X-0.5 5ICP-64W-10X-1 5ICP-64W-10X-20ML 5ICP-64W-10X-5 5ICP-64W-5 5ICP-65W-1 5ICP-65W-10X-0.5 5ICP-65W-10X-1 5ICP-65W-10X-20ML 5ICP-65W-10X-5 5ICP-65W-5 5ICP-66N-1 5ICP-66N-5 5ICP-67N-1 5ICP-67N-10X-0.5 5ICP-67N-10X-1 5ICP-67N-10X-20ML 5ICP-67N-10X-5 5ICP-67N-25X-20ML 5ICP-67N-5 5, 63ICP-68N-1 5ICP-68N-10X-0.5 5ICP-68N-10X-1 5ICP-68N-10X-20ML 5ICP-68N-10X-5 5ICP-68N-25X-20ML 5ICP-68N-5 5ICP-69N-1 5, 38ICP-69N-10X-0.5 5ICP-69N-10X-1 5ICP-69N-10X-20ML 5ICP-69N-10X-5 5ICP-69N-25X-20ML 5ICP-69N-5 5ICP-70N-1 5ICP-70N-10X-0.5 5ICP-70N-10X-1 5ICP-70N-10X-20ML 5ICP-70N-10X-5 5ICP-70N-25X-20ML 5ICP-70N-5 5ICP-71N-1 5ICP-71N-10X-0.5 5ICP-71N-10X-1 5ICP-71N-10X-20ML 5ICP-71N-10X-5 5ICP-71N-25X-20ML 5ICP-71N-5 5ICP-MS-01N-0.01X-1 6ICP-MS-01N-0.1X-1 6ICP-MS-01N-1 6ICP-MS-02N-0.01X-1 6ICP-MS-02N-0.1X-1 6ICP-MS-02N-1 6ICP-MS-03N-0.01X-1 6ICP-MS-03N-0.1X-1 6ICP-MS-03N-1 6ICP-MS-04N-0.01X-1 6ICP-MS-04N-0.1X-1 6ICP-MS-04N-1 6ICP-MS-05N-0.01X-1 6ICP-MS-05N-0.1X-1 6ICP-MS-05N-1 6ICP-MS-06N-0.01X-1 6ICP-MS-06N-0.1X-1 6ICP-MS-06N-1 6ICP-MS-07W-0.01X-1 6ICP-MS-07W-0.1X-1 6

ICP-MS-07W-1 6ICP-MS-08N-0.01X-1 6ICP-MS-08N-0.1X-1 6ICP-MS-08N-1 6ICP-MS-09N-0.01X-1 6ICP-MS-09N-0.1X-1 6ICP-MS-09N-1 6ICP-MS-11N-0.01X-1 6ICP-MS-11N-0.1X-1 6ICP-MS-11N-1 6ICP-MS-12N-0.01X-1 6ICP-MS-12N-0.1X-1 6ICP-MS-12N-1 6ICP-MS-13N-0.01X-1 6ICP-MS-13N-0.1X-1 6ICP-MS-13N-1 6ICP-MS-14N-0.01X-1 6ICP-MS-14N-0.1X-1 6ICP-MS-14N-1 6ICP-MS-15N-0.01X-1 6ICP-MS-15N-0.1X-1 6ICP-MS-15N-1 6ICP-MS-16N-0.01X-1 6ICP-MS-16N-0.1X-1 6ICP-MS-16N-1 6ICP-MS-17N-0.01X-1 6ICP-MS-17N-0.1X-1 6ICP-MS-17N-1 6ICP-MS-18N-0.01X-1 6ICP-MS-18N-0.1X-1 6ICP-MS-18N-1 6ICP-MS-19N-0.01X-1 6ICP-MS-19N-0.1X-1 6ICP-MS-19N-1 6ICP-MS-200.8-CAL1-1 44ICP-MS-200.8-CAL1R-1 44ICP-MS-200.8-CAL2-1 44ICP-MS-200.8-CAL3-1 44ICP-MS-200.8-IS-1 44ICP-MS-200.8-IS2-1 44ICP-MS-200.8-TUN-1 44ICP-MS-20N-0.01X-1 6ICP-MS-20N-0.1X-1 6ICP-MS-20N-1 6ICP-MS-21W-0.01X-1 6ICP-MS-21W-0.1X-1 6ICP-MS-21W-1 6ICP-MS-22H-0.01X-1 6ICP-MS-22H-0.1X-1 6ICP-MS-22H-1 6ICP-MS-23N-0.01X-1 6ICP-MS-23N-0.1X-1 6ICP-MS-23N-1 6ICP-MS-24N-0.01X-1 6ICP-MS-24N-0.1X-1 6ICP-MS-24N-1 6ICP-MS-25N-0.01X-1 6ICP-MS-25N-0.1X-1 6ICP-MS-25N-1 6ICP-MS-26H-0.01X-1 6ICP-MS-26H-0.1X-1 6ICP-MS-26H-1 6ICP-MS-27N-0.01X-1 6ICP-MS-27N-0.1X-1 6ICP-MS-27N-1 6ICP-MS-28N-0.01X-1 6ICP-MS-28N-0.1X-1 6ICP-MS-28N-1 6ICP-MS-29N-0.01X-1 6ICP-MS-29N-0.1X-1 6ICP-MS-29N-1 6ICP-MS-30N-0.01X-1 6ICP-MS-30N-0.1X-1 6ICP-MS-30N-1 6ICP-MS-31N-0.01X-1 6ICP-MS-31N-0.1X-1 6ICP-MS-31N-1 6ICP-MS-32N-0.01X-1 6ICP-MS-32N-0.1X-1 6ICP-MS-32N-1 6ICP-MS-33N-0.01X-1 6ICP-MS-33N-0.1X-1 6ICP-MS-33N-1 6ICP-MS-34N-0.01X-1 6ICP-MS-34N-0.1X-1 6ICP-MS-34N-1 6ICP-MS-35W-0.01X-1 6ICP-MS-35W-0.1X-1 6ICP-MS-35W-1 6ICP-MS-36N-0.01X-1 6ICP-MS-36N-0.1X-1 6ICP-MS-36N-1 6ICP-MS-37N-0.01X-1 6ICP-MS-37N-0.1X-1 6ICP-MS-37N-1 6ICP-MS-38W-0.01X-1 6ICP-MS-38W-0.1X-1 6ICP-MS-38W-1 6ICP-MS-40H-0.01X-1 6ICP-MS-40H-0.1X-1 6ICP-MS-40H-1 6ICP-MS-41W-0.01X-1 6ICP-MS-41W-0.1X-1 6ICP-MS-41W-1 6ICP-MS-42H-0.01X-1 6ICP-MS-42H-0.1X-1 6ICP-MS-42H-1 6ICP-MS-43N-0.01X-1 6ICP-MS-43N-0.1X-1 6ICP-MS-43N-1 6

ICP-MS-44N-0.01X-1 6ICP-MS-44N-0.1X-1 6ICP-MS-44N-1 6ICP-MS-45W-0.01X-1 6ICP-MS-45W-0.1X-1 6ICP-MS-45W-1 6ICP-MS-46H-0.01X-1 6ICP-MS-46H-0.1X-1 6ICP-MS-46H-1 6ICP-MS-47N-0.01X-1 6ICP-MS-47N-0.1X-1 6ICP-MS-47N-1 6ICP-MS-48H-0.01X-1 6ICP-MS-48H-0.1X-1 6ICP-MS-48H-1 6ICP-MS-49N-0.01X-1 6ICP-MS-49N-0.1X-1 6ICP-MS-49N-1 6ICP-MS-50N-0.01X-1 6ICP-MS-50N-0.1X-1 6ICP-MS-50N-1 6ICP-MS-51N-0.01X-1 6ICP-MS-51N-0.1X-1 6ICP-MS-51N-1 6ICP-MS-52W-0.01X-1 6ICP-MS-52W-0.1X-1 6ICP-MS-52W-1 6ICP-MS-53N-0.01X-1 6ICP-MS-53N-0.1X-1 6ICP-MS-53N-1 6ICP-MS-54N-0.01X-1 6ICP-MS-54N-0.1X-1 6ICP-MS-54N-1 6ICP-MS-55N-0.01X-1 6ICP-MS-55N-0.1X-1 6ICP-MS-55N-1 6ICP-MS-56W-0.01X-1 7ICP-MS-56W-0.1X-1 7ICP-MS-56W-1 7ICP-MS-57W-0.01X-1 7ICP-MS-57W-0.1X-1 7ICP-MS-57W-1 7ICP-MS-58H-0.01X-1 7ICP-MS-58H-0.1X-1 7ICP-MS-58H-1 7ICP-MS-59N-0.01X-1 7ICP-MS-59N-0.1X-1 7ICP-MS-59N-1 7ICP-MS-6020-CAL-1 44ICP-MS-6020-INT1-1 44ICP-MS-6020-INT2-1 44ICP-MS-6020-TUN-1 44ICP-MS-60N-0.01X-1 7ICP-MS-60N-0.1X-1 7ICP-MS-60N-1 7ICP-MS-61N-0.01X-1 7ICP-MS-61N-0.1X-1 7ICP-MS-62N-0.01X-1 7ICP-MS-62N-0.1X-1 7ICP-MS-62N-1 7ICP-MS-63N-0.01X-1 7ICP-MS-63N-0.1X-1 7ICP-MS-63N-1 7ICP-MS-64W-0.01X-1 7ICP-MS-64W-0.1X-1 7ICP-MS-64W-1 7ICP-MS-65W-0.01X-1 7ICP-MS-65W-0.1X-1 7ICP-MS-65W-1 7ICP-MS-66N-0.01X-1 7ICP-MS-66N-0.1X-1 7ICP-MS-67N-0.01X-1 7ICP-MS-67N-0.1X-1 7ICP-MS-67N-1 7ICP-MS-68N-0.01X-1 7ICP-MS-68N-0.1X-1 7ICP-MS-68N-1 7ICP-MS-69N-0.01X-1 7ICP-MS-69N-0.1X-1 7ICP-MS-69N-1 7ICP-MS-70N-0.01X-1 7ICP-MS-70N-0.1X-1 7ICP-MS-70N-1 7ICP-MS-71N-0.01X-1 7ICP-MS-71N-0.1X-1 7ICP-MS-71N-1 7ICP-MS-BLH-1 41ICP-MS-BLH-5 41ICP-MS-BLN-1 41ICP-MS-BLN-5 41ICP-MS-BLW-1 41ICP-MS-BLW-5 41ICP-MS-CAL-1-SET 41ICP-MS-CAL1-1 41ICP-MS-CAL2-1 41ICP-MS-CAL3-1 41ICP-MS-CAL4-1 41ICP-MS-CAL5-1 41ICP-MS-INT-1-SET 42ICP-MS-INTA-1 42ICP-MS-INTB-1 42ICP-MS-IS-BI-1 43ICP-MS-IS-BI-1-10X 43ICP-MS-IS-IN-1 43ICP-MS-IS-IN-1-10X 43ICP-MS-IS-MIX1-1 43, 44ICP-MS-IS-RH-1 43ICP-MS-IS-RH-1-10X 43ICP-MS-IS-SC-1 43ICP-MS-IS-SC-1-10X 43

ICP-MS-IS-TB-1 43ICP-MS-IS-TB-1-10X 43ICP-MS-IS-Y-1 43ICP-MS-IS-Y-1-10X 43ICP-MS-MEMCHK-R1-SET 42ICP-MS-MEMCHKA-R1-SET 42ICP-MS-MEMCHKA1-R1 42ICP-MS-MEMCHKA2-R1 42ICP-MS-MEMCHKB-R1 42ICP-MS-QC1-1 43ICP-MS-QC2-1 43ICP-MS-QC3-1 43ICP-MS-SPIKE-1-SET 43ICP-MS-SPIKE-S-1 43ICP-MS-SPIKE-W-1 43ICP-MS-TUNSOL1-1 42ICP-MS-TUNSOL2-1 42ICP-PWDRES-5 28ICS-01-1 21ICS-01-5 21ICS-02-1 21ICS-02-5 21ICS-03-1 21ICS-03-5 21ICS-04-1 21ICS-04-5 21ICS-05-1 21ICS-05-5 21ICS-06-1 21ICS-06-5 21ICS-07-1 21ICS-07-5 21INT-01-1 37INT-01-5 37INT-02-1 37INT-02-5 37INT-03-1 37INT-03-5 37INT-04-1 37INT-04-5 37INT-1986-1-SET 37INT-1986-5-SET 37LFSS-01-1 35LFSS-01-5 35LPCS-01-1 35LPCS-01-5 35LPCS-01R-1 38LPCS-01R-5 38M-1664-20ML 19M-1664-20ML-PAK 19M-1664-5ML 19M-1664-5ML-PAK 19M-200.7-01-1 35M-200.7-01-5 35M-200.7-02R-1 35M-200.7-02R-5 35M-200.7-03R-1 35M-200.7-03R-5 35M-200.7-04-1 35M-200.7-04-5 35M-200.7-05-1 35M-200.7-05-5 35M-200.7-1-R-SET 35M-200.7-5-R-SET 35M-200.7-IPC-01-1 36M-200.7-IPC-01-5 36M-200.7-IPC-02-1 36M-200.7-IPC-02-5 36M-200.7-LFSS-01-1 36M-200.7-LFSS-01-5 36M-200.7-LFSS-01S-1 36M-200.7-LFSS-01S-5 36M-200.7-LFSS-01W-1 36M-200.7-LFSS-01W-5 36M-200.7-LFSS-02-1 36M-200.7-LFSS-02-5 36M-200.7-SP-01-R 33M-200.7-SP-02-R 33M-200.7-SP-02-R-1 33M-200.7-SP-02-R-5 33M-200.7-SP-03 33M-200.7-SP-04-R 33M-200.7-SP-05-R 33M-200.7-SP-R-SET 33M-300.1-SS 14, 17M-314.0-MCA-250X-1 14M-314.0-CMCS-1 14M-314.0-SET 14M-418 19M-418-CON 19M-418-PAK 19M-8440 19M-8440-CON 19M-8440-CON-PAK 19M-8440-PAK 19M-8440-SGC 19M-8440-SGC-PAK 19MA-900-4 46MA-900-8 46MCS-01-1 33, 37MCS-01-5 33, 37MCS-02-1 33, 37MCS-02-5 33, 37MCS-03-1 33MCS-03-5 33MCS-03R-1 37MCS-03R-5 37MCS-04-1 33MCS-04-5 33MCS-04R-1 37

MCS-04R-5 37MCS-05-1 33MCS-05-5 33MCS-05R-1 37MCS-05R-5 37MCS-06R-1 37MCS-06R-5 37MCS-1986-1-SET 33MCS-1986-5-SET 33MCS-1996-1-SET 37MCS-1996-5-SET 37MES-01-1 26MES-01-5 26MES-02-1 26MES-02-5 26MES-03-1 26MES-03-5 26MES-04-1 26MES-04-5 26MES-05-1-SET 26MES-05-5-SET 26MES-06-1-SET 26MES-06-5-SET 26MES-07-1 26MES-07-5 26MES-08-1-SET 26MES-08-5-SET 26MES-09-1-SET 26MES-09-5-SET 26MES-10-1 27MES-10-5 27MES-11-1-SET 27MES-11-5-SET 27MES-12-1 27MES-12-5 27MES-13-1-SET 27MES-13-5-SET 27MES-14-1 27MES-14-5 27MES-15-1 27MES-15-5 27MES-16-1 27MES-16-5 27MES-17-1 27MES-17-5 27MES-18-1 27MES-18-5 27MES-19-1 27MES-19-5 27MES-20-1 27MES-20-5 27MES-21-1-SET 28MES-21-5-SET 28MES-21-HG 28MES-22-1 28MES-22-5 28MISA-01-1 25MISA-02-1 25MISA-03-1 25MISA-04-1 25MISA-05-1 25MISA-06-1 25MISA-1-SET 25MOD-02-0.5 11MOD-02-1 11MOD-02-5 11MOD-03-0.5 11MOD-03-1 11MOD-03-5 11MOD-04-0.5 11MOD-04-1 11MOD-04-5 11MOD-05-0.5 11MOD-05-1 11MOD-05-5 11MOD-06-0.5 11MOD-06-1 11MOD-06-5 11MOD-07-0.5 11MOD-07-1 11MOD-07-5 11MOD-08-0.5 11MOD-08-1 11MOD-08-5 11MOD-09A-0.5 11MOD-09A-1 11MOD-09A-5 11MOD-09B-0.5 11MOD-09B-1 11MOD-09B-5 11MOD-09C-0.5 11MOD-09C-1 11MOD-09C-5 11MOSOL-20 46MOSOL-75 46QCS-01-1 20, 38QCS-01-5 20, 38QCS-02-1 20, 38QCS-02-5 20, 38QCS-02-R1-1 20, 38QCS-02-R1-5 20, 38QCS-03-1 20QCS-03-5 20QCS-04-1 20QCS-05-1 20QCS-06-1 20QCS-1-SET 20QCS-5-SET 20QCS-ASL-21-1 21QCS-ASL-21-5 21

Page 80: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

iv

QCS-ASL-7-1 21QCS-ASL-7-5 21SBPT-AROM 56SBPT-BENZ 56SBPT-LSGAS 56, 61SBPT-OLEFIN 56SBPT-OLEFINSFC 56SBPT-SDF 56SBPT-SGAS 56SBPT-SWMO 56SCO-100X-4 54SCO-10X-4 54SCO-200X-4 54SCO-25X-4 54SCO-300X-4 54SCO-400X-4 54SCO-500X-4 54SCO-50X-4 54SCO-CAL-4-SET 54SDF-100X-20ML-PAK 53SDF-100X-4 53SDF-10X-20ML-PAK 53SDF-10X-4 53SDF-150X-20ML-PAK 53SDF-150X-4 53SDF-15X-20ML-PAK 53SDF-15X-4 53SDF-1X-20ML-PAK 53SDF-1X-4 53SDF-200X-20ML-PAK 53SDF-200X-4 53SDF-2X-20ML-PAK 53SDF-2X-4 53SDF-300X-20ML-PAK 53SDF-300X-4 53SDF-30X-20ML-PAK 53SDF-30X-4 53SDF-3X-20ML-PAK 53SDF-3X-4 53SDF-400X-20ML-PAK 53SDF-400X-4 53SDF-4X-20ML-PAK 53SDF-4X-4 53SDF-500X-20ML-PAK 53SDF-500X-4 53SDF-50X-20ML-PAK 53SDF-50X-4 53SDF-5X-20ML-PAK 53SDF-5X-4 53SDF-600X-20ML-PAK 53SDF-600X-4 53SDF-7.5X-20ML-PAK 53SDF-7.5X-4 53SDF-70X-20ML-PAK 53SDF-70X-4 53SDF-BL-20ML-PAK 53SDF-BL-4 53SDF-CAL-4-SET 53SDWA-01-1 23, 40SDWA-01-5 23, 40SDWA-02-1 23, 40SDWA-02-5 23, 40SDWA-03-1 23, 40SDWA-03-5 23, 40SDWA-04-1 23, 40SDWA-04-5 23, 40SDWA-05-1 23, 40SDWA-05-5 23, 40SDWA-06-MS-1 23, 40SDWA-06-MS-5 23, 40SDWA-07-1 23, 40SDWA-07-5 23, 40SDWA-08-1 23, 40SDWA-08-5 23, 40SDWA-09-1 23, 40SDWA-09-5 23, 40SDWA-1-SET 23, 40SDWA-5-SET 23, 40SIC-1-SET 34SIC-5-SET 34SIC-SING-1-SET 34SIC-SING-R-1-SET 38SICS-01-1 34SICS-01-5 34SICS-02-1 34SICS-02-5 34SICS-03-1 34SICS-03-5 34SK-100X-20ML-PAK 54SK-100X-4 54SK-10X-20ML-PAK 54SK-10X-4 54SK-1X-20ML-PAK 54SK-1X-4 54SK-200X-20ML-PAK 54SK-200X-4 54SK-20X-20ML-PAK 54SK-20X-4 54SK-30X-20ML-PAK 54SK-30X-4 54SK-3X-20ML-PAK 54SK-3X-4 54SK-40X-20ML-PAK 54SK-40X-4 54SK-50X-20ML-PAK 54SK-50X-4 54SK-5X-20ML-PAK 54SK-5X-4 54SK-7.5X-20ML-PAK 54SK-7.5X-4 54

SK-BL-20ML-PAK 54SK-BL-4 54SK-CAL-4-SET 54SK-HD-100X-4 54SK-HD-10X-4 54SK-HD-150X-4 54SK-HD-15X-4 54SK-HD-1X-4 54SK-HD-200X-4 54SK-HD-20X-4 54SK-HD-2X-4 54SK-HD-300X-4 54SK-HD-30X-4 54SK-HD-3X-4 54SK-HD-400X-4 54SK-HD-40X-4 54SK-HD-4X-4 54SK-HD-500X-4 54SK-HD-50X-4 54SK-HD-5X-4 54SK-HD-600X-4 54SK-HD-7.5X-4 54SK-HD-70X-4 54SK-HD-BL-4 54SK-HD-CAL-4-SET 54SQS-01-1 22SQS-02-1 22SQS-03-1 22SRO-100X-4 54SRO-150X-4 54SRO-200X-4 54SRO-300X-4 54SRO-35X-4 54SRO-400X-4 54SRO-70X-4 54SRO-CAL-4-SET 54STP-100X-4 55STP-10X-4 55STP-1X-4 55STP-200X-4 55STP-20X-4 55STP-2X-4 55STP-300X-4 55STP-30X-4 55STP-3X-4 55STP-40X-4 55STP-5X-4 55STP-60X-4 55STP-BL-4 55STP-CAL-SET 55SWMO-100X-20ML-PAK 53SWMO-100X-4 53SWMO-10X-20ML-PAK 53SWMO-10X-4 53SWMO-150X-20ML-PAK 53SWMO-150X-4 53SWMO-15X-20ML-PAK 53SWMO-15X-4 53SWMO-1X-20ML-PAK 53SWMO-1X-4 53SWMO-200X-20ML-PAK 53SWMO-200X-4 53SWMO-2X-20ML-PAK 53SWMO-2X-4 53SWMO-300X-20ML-PAK 53SWMO-300X-4 53SWMO-30X-20ML-PAK 53SWMO-30X-4 53SWMO-3X-20ML-PAK 53SWMO-3X-4 53SWMO-400X-20ML-PAK 53SWMO-400X-4 53SWMO-4X-20ML-PAK 53SWMO-4X-4 53SWMO-500X-20ML-PAK 53SWMO-500X-4 53SWMO-50X-20ML-PAK 53SWMO-50X-4 53SWMO-5X-20ML-PAK 53SWMO-5X-4 53SWMO-600X-20ML-PAK 53SWMO-600X-4 53SWMO-7.5X-20ML-PAK 53SWMO-7.5X-4 53SWMO-70X-20ML-PAK 53SWMO-70X-4 53SWMO-BL-20ML-PAK 53SWMO-BL-4 53SWMO-CAL-4-SET 53SWMO-LT-100X-20ML-PAK 53SWMO-LT-100X-4 53SWMO-LT-10X-20ML-PAK 53SWMO-LT-10X-4 53SWMO-LT-150X-20ML-PAK 53SWMO-LT-150X-4 53SWMO-LT-15X-20ML-PAK 53SWMO-LT-15X-4 53SWMO-LT-1X-20ML-PAK 53SWMO-LT-1X-4 53SWMO-LT-200X-20ML-PAK 53SWMO-LT-200X-4 53SWMO-LT-2X-20ML-PAK 53SWMO-LT-2X-4 53SWMO-LT-300X-20ML-PAK 53SWMO-LT-300X-4 53SWMO-LT-30X-20ML-PAK 53SWMO-LT-30X-4 53SWMO-LT-3X-20ML-PAK 53SWMO-LT-3X-4 53SWMO-LT-400X-20ML-PAK 53

SWMO-LT-400X-4 53SWMO-LT-4X-20ML-PAK 53SWMO-LT-4X-4 53SWMO-LT-500X-20ML-PAK 53SWMO-LT-500X-4 53SWMO-LT-50X-20ML-PAK 53SWMO-LT-50X-4 53SWMO-LT-5X-20ML-PAK 53SWMO-LT-5X-4 53SWMO-LT-600X-20ML-PAK 53SWMO-LT-600X-4 53SWMO-LT-7.5X-20ML-PAK 53SWMO-LT-7.5X-4 53SWMO-LT-70X-20ML-PAK 53SWMO-LT-70X-4 53SWMO-LT-BL-20ML-PAK 53SWMO-LT-BL-4 53SWMO-LT-CAL-4-SET 53TCLP-01-1 24, 39TCLP-01-5 24, 39TCLP-02-1 24, 35, 37, 38, 39TCLP-02-5 24, 35, 37, 38, 39TCLP-GFAA-1 24, 39TCLP-GFAA-5 24, 39TCLP-ICP-1 24, 39TCLP-ICP-5 24, 39WC-ALK-10X-1 17, 18WC-BOD-10ML 18WC-CN-10X-1 17, 18WC-CN-1X-1 18WC-COD-5X-10ML 18WC-COND-10X-1 17, 18WC-HARD-10X-1 17, 18WC-HEX-10X-1 18WC-MBAS-10X-1 18WC-OILG-10X-1 18WC-PH-4-1 17, 18WC-PHEN-10X-1 18WC-SIO2-10X-1 17, 18WC-SOL 17, 18WC-TKN-10X-1 17, 18WC-TOC-10X-1 18WC-TON-10X-1 17, 18WC-TOX-10X 18WC-TOX-10X-PAK 18WC-TRC-10X-10ML 17, 18WC-TURB-4X-1 17, 18WM-11-NMS-1-SET 48WM-11-NMS-10X-1 48WM-11-NMS-1X-1 48WM-11-NMS-30X-1 48WM-11-NMS-3X-1 48WM-11-NMS-50X-1 48WM-11-NMS-5X-1 48WM-11-NMS-90X-1 48WM-12-10X-4 46WM-12-10X-8 46WM-12-1X-4 46WM-12-1X-8 46WM-12-30X-4 46WM-12-30X-8 46WM-12-3X-4 46WM-12-3X-8 46WM-12-4-SET 46WM-12-50X-4 46WM-12-50X-8 46WM-12-5X-4 46WM-12-5X-8 46WM-12-8-SET 46WM-12-90X-4 46WM-12-90X-8 46WM-12-NMS-1-SET 48WM-12-NMS-10X-1 48WM-12-NMS-1X-1 48WM-12-NMS-30X-1 48WM-12-NMS-3X-1 48WM-12-NMS-50X-1 48WM-12-NMS-5X-1 48WM-20-NMS-1-SET 48, 59WM-20-NMS-10X-1 48, 59WM-20-NMS-1X-1 48, 59WM-20-NMS-30X-1 48, 59WM-20-NMS-3X-1 48, 59WM-20-NMS-50X-1 48, 59WM-20-NMS-5X-1 48, 59WM-20-NMS-90X-1 48, 59WM-20CST-01 46WM-20CST-02 46WM-20CST-03 46WM-20CST-04 46WM-20CST-05 46WM-20CST-06 46WM-20CST-07 46WM-20CST-08 46WM-20CST-09 46WM-20CST-13 46WM-20CST-14 46WM-20CST-15 46WM-20CST-28 46WM-20CST-29 46WM-20CST-30 46WM-20CST-32 46WM-20CST-33 46WM-20CST-34 46WM-20CST-35 46WM-20CST-37 46WM-20CST-41 46WM-20CST-43 46WM-20CST-50 46WM-20CST-51 46

WM-20CST-52 46WM-20CST-53 46WM-20CST-54 46WM-20CST-55 46WM-20CST-56 46WM-20CST-60 46WM-20CST-63 46WM-20CST-64 46WM-20CST-69 46WM-20CST-70 46WM-20CST-71 46WM-21-10X-4 46WM-21-10X-8 46WM-21-1X-4 46WM-21-1X-8 46WM-21-30X-4 46WM-21-30X-8 46WM-21-3X-4 46WM-21-3X-8 46WM-21-4-SET 46WM-21-50X-4 46WM-21-50X-8 46WM-21-5X-4 46WM-21-5X-8 46WM-21-8-SET 46WM-21-90X-4 46WM-21-90X-8 46WM-21-NMS-1-SET 48, 60WM-21-NMS-10X-1 48, 60WM-21-NMS-1X-1 48, 60WM-21-NMS-30X-1 48, 60WM-21-NMS-3X-1 48, 60WM-21-NMS-50X-1 48, 60WM-21-NMS-5X-1 48, 60WM-75CST-01-5X 46WM-75CST-02-5X 46WM-75CST-04-5X 46WM-75CST-06-5X 46WM-75CST-07-5X 46WM-75CST-08-5X 46WM-75CST-09-5X 46WM-75CST-13-5X 46WM-75CST-14-5X 46WM-75CST-15-5X 46WM-75CST-27 46WM-75CST-27-5X 46WM-75CST-29-5X 46WM-75CST-30-5X 46WM-75CST-32-5X 46WM-75CST-33-5X 46WM-75CST-35-5X 46WM-75CST-37-5X 46WM-75CST-41-5X 46WM-75CST-43-5X 46WM-75CST-51-5X 46WM-75CST-52-5X 46WM-75CST-53-5X 46WM-75CST-54-5X 46WM-75CST-56-5X 46WM-75CST-63-5X 46WM-75CST-64-5X 46WM-75CST-67 46WM-75CST-67-5X 46WM-75CST-69-5X 46WM-75CST-70-5X 46WM-75CST-71-5X 46WM-NMS-01 47WM-NMS-01-30X-25G 47WM-NMS-01-30X-50G 47WM-NMS-01-5X 47WM-NMS-02 47WM-NMS-02-20X-25G 47WM-NMS-02-20X-50G 47WM-NMS-02-5X 47WM-NMS-03 47WM-NMS-03-5X 47WM-NMS-04 47WM-NMS-04-125X-25G 47WM-NMS-04-125X-50G 47WM-NMS-04-5X 47WM-NMS-05 47WM-NMS-05-5X 47WM-NMS-07-25X-25G 47WM-NMS-07-25X-50G 47WM-NMS-08 47WM-NMS-08-100X-25G 47WM-NMS-08-100X-50G 47WM-NMS-08-5X 47WM-NMS-09 47WM-NMS-09-50X-25G 47WM-NMS-09-50X-50G 47WM-NMS-09-5X 47WM-NMS-11-50X-25G 47WM-NMS-11-50X-50G 47WM-NMS-13 47WM-NMS-13-35X-25G 47WM-NMS-13-35X-50G 47WM-NMS-13-5X 47WM-NMS-14 47, 59, 60WM-NMS-14-5X 47, 59, 60WM-NMS-14-75X-25G 47WM-NMS-14-75X-50G 47WM-NMS-15 47WM-NMS-15-5X 47WM-NMS-15-60X-25G 47WM-NMS-15-60X-50G 47WM-NMS-20 47WM-NMS-20-5X 47WM-NMS-22 47WM-NMS-27 47

WM-NMS-27-40X-25G 47WM-NMS-27-40X-50G 47WM-NMS-27-5X 47WM-NMS-29 47WM-NMS-29-200X-25G 47WM-NMS-29-200X-50G 47WM-NMS-29-5X 47WM-NMS-30 47WM-NMS-30-15X-25G 47WM-NMS-30-15X-50G 47WM-NMS-30-5X 47WM-NMS-32 47WM-NMS-32-30X-25G 47WM-NMS-32-30X-50G 47WM-NMS-32-5X 47WM-NMS-33 47WM-NMS-33-5X 47WM-NMS-33-60X-25G 47WM-NMS-33-75X-50G 47WM-NMS-34 47WM-NMS-34-5X 47WM-NMS-35 47WM-NMS-35-50X-25G 47WM-NMS-35-50X-50G 47WM-NMS-35-5X 47WM-NMS-37 47WM-NMS-37-50X-25G 47WM-NMS-37-50X-50G 47WM-NMS-37-5X 47WM-NMS-41 47WM-NMS-41-50X-25G 47WM-NMS-41-50X-50G 47WM-NMS-41-5X 47WM-NMS-43 47WM-NMS-43-5X 47WM-NMS-43-75X-25G 47WM-NMS-43-75X-50G 47WM-NMS-44-30X-25G 47WM-NMS-44-30X-50G 47WM-NMS-51 47WM-NMS-51-35X-25G 47WM-NMS-51-35X-50G 47WM-NMS-51-5X 47WM-NMS-52 47WM-NMS-52-5X 47WM-NMS-52-75X-25G 47WM-NMS-52-75X-50G 47WM-NMS-53 47WM-NMS-53-5X 47WM-NMS-54 47WM-NMS-54-25X-25G 47WM-NMS-54-25X-50G 47WM-NMS-54-5X 47WM-NMS-55 47WM-NMS-55-100X-25G 47WM-NMS-55-100X-50G 47WM-NMS-55-5X 47WM-NMS-60 47WM-NMS-60-50X-25G 47WM-NMS-60-50X-50G 47WM-NMS-60-5X 47WM-NMS-63 47WM-NMS-63-5X 47WM-NMS-63-75X-25G 47WM-NMS-63-75X-50G 47WM-NMS-64 47WM-NMS-64-50X-25G 47WM-NMS-64-50X-50G 47WM-NMS-64-5X 47WM-NMS-67 47WM-NMS-67-40X-25G 47WM-NMS-67-40X-50G 47WM-NMS-67-5X 47WM-NMS-68 47WM-NMS-68-5X 47WM-NMS-69-25X-25G 47WM-NMS-69-25X-50G 47WM-NMS-70 47WM-NMS-70-5X 47WM-NMS-70-60X-25G 47WM-NMS-70-60X-50G 47WM-NMS-71 47WM-NMS-71-50X-25G 47WM-NMS-71-50X-50G 47WM-NMS-71-5X 47WM-STAB 46WPAM-01-1 24WPAM-01-5 24WPAM-03-1 24WPAM-03-5 24WPAM-1-SET 24WPAM-5-SET 24WPTM-01-1 24WPTM-01-5 24WPTM-02-1 24WPTM-02-5 24WPTM-03-1 24WPTM-03-5 24WPTM-1-SET 24WPTM-5-SET 24

Page 81: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Requested QuantityOrganic Inorganic

Photocopythis form for future use

YOU CAN ALSO USE OUR WEB SITE TOREQUEST CUSTOM QUOTATIONS AT

www.accustandard.com

QR-PDN-001Rev. AUG 11 2003

Requested Delivery Date __________Quotation Notes _____________________________________________

_____________________________________________

_____________________________________________

For Internal Use Only

No. of Comps. ____

Product Description ________________________________________

Concentration ______________________

Solvent / Matrix ______________________

___ x 500 mL

___ x 500 mL5 x 1 mL

10 x 1 mL

20 x 1 mL

other ___ x ___

Concentration Units

ng/mL

µg/mL

mg/mL

wt. %

vol. %

Component (s) CAS No. Concentration

(optional) (if varied)

1 __________________________________________________________2 __________________________________________________________3 __________________________________________________________4 __________________________________________________________5 __________________________________________________________6 __________________________________________________________7 __________________________________________________________8 __________________________________________________________9 __________________________________________________________

10 __________________________________________________________11 __________________________________________________________12 __________________________________________________________13 __________________________________________________________14 __________________________________________________________15 __________________________________________________________16 __________________________________________________________17 __________________________________________________________18 __________________________________________________________19 __________________________________________________________20 __________________________________________________________

AccuStandard, Inc.125 Market StreetNew Haven, CT 06513USAFAX: 203-786-5287

Page ___ of ___

From:Company Contact _______________________________________

Company Name _______________________________________

Phone: ( ) _______________________ Ext. __________

FAX: ( ) _______________________

Email: ______________________________________

Custom Quotation Request Form

Send to:

AS Tech. Rep. __________ Product Ordering # ____________

Quote Creation Date __________ Quoted price $ ____________

1

Page 82: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

PHONE: E-MAIL:

CONTACT NAME:

CUSTOMER ACCT #:

TOTALQTY.

1

DESCRIPTIONCATALOG NUMBERUNIT

PRICEUNITSIZE

ITEMNO.

DATE:

UPS ACCT. #: _________________ FED EX ACCT. #: ________________

STD ECO P-1 SAT.DELIV.

COD *GROUND 3rd DAY BLUE RED COD *

UPS FED EX Extra charge for Saturday Delivery

A HANDLING FEE IS ASSOCIATED WITH EACH ORDERNote: Charges for COD may vary

SPECIAL INSTRUCTIONS:

BILL TO PO # DATE REQUIRED

BILLING ADDRESS: SAME (AS SHIPPING) SHIPPING ADDRESS: (SAME AS BEFORE ?) YESYES

CREDIT CARD NUMBER

PAYMENT BY CREDIT CARD

COMPANY NAME

ADDRESS

ATTENTION TO:

Month Year____________________________NAME ON CARD EXPIR. DATE

MASTERCARDVISA

AMERICAN EXPRESS

FAX TO:

QR-OFF-017Rev. 12/99

2

3

4

5

6

7

8

9

10

11

12

13

14

15

AccuStandard, Inc.(203) 786-5287

AccuStandard, Inc.125 Market Street • New Haven, CT 06513800-442-5290 • 203-786-5290

Photocopy this form for future use

Order Form

Page 83: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

Trade Marks and Registered TrademarksThe following trademarks and registered trademarks are accurate to the best of our knowledge at the time of printing. Please consult individual manufacturers and other resources for specific information.

Placement of OrdersTelephone

800-442-5290 (Toll Free) or203-786-5290

8:00 AM - 5:30 PM EST Weekdays24 Hours Voice Messaging

Fax877-786-5287 (Toll Free) or203-786-5287

Place orders 24/7

Technical Dept. 203-786-5290 8:00 AM - 5:00 PM EST Weekdays

International011-203-786-5290 or Fax 011-203-786-5287

8:00 AM - 5:30 PM EST Weekdays24 Hours Voice Messaging

Web AccuStandard.com 24/7

Email [email protected] 24/7

MailAccuStandard, Inc.125 Market StreetNew Haven, CT 06513 USA

ShipmentsOrders shipped via UPS or Federal Express. Where applicable, other methods of transportation will be used in accordance withDOT and IATA regulations. A handling fee is associated with each order. Hazardous Shipping charges may apply.Conditions of SaleNet 30 Days - FOB New Haven, Connecticut. Prices are in US dollars and are subject to change without notice. 1.5 % financecharge on overdue accounts will be applied. Our products are not for resale unless prior explicit approval has been granted.LiabilityProducts listed in this catalog are for research use only. No warranty for any particular application is expressed or implied. Due totheir hazardous nature, they should be handled by trained personnel. AccuStandard's liability will be limited to replacement ofproduct or refund of purchase price. Notice of claims must be made within thirty (30) days from date of delivery.

We Accept

5 Ways to Search“e-Standards” is the Fastest, Most Comprehensive SearchEngine available and contains over 35,000 different products.Search by:

Catalog Number

Component(s) or CAS Number(s)

Method (EPA, ASTM, ISO, DIN etc.)

Chemical Category (Organic, Inorganic, Petroleum, etc.)

Other Companies’ Part Number

This is the easier way to get Chemical Reference Standards

e-Standards™ @ AccuStandard.com.Easy Ordering 24/7Find It Fast...simply search for a product, select it for purchase & click - it's that easy! Discounts mayapply to online orders, see details on website.

On-Line Custom ServicesAccuStandard specializes in Synthesizing chemicals of highpurity to be used as Reference Standards, and offers CustomSynthesis capability for milligram to kilogram batches. If youcan't find the specific Standard you need, we can prepareCustom Formulations and Custom Packaging for bothOrganic and Inorganic products, for your unique requirements.

PRINTED ONRECYCLED PAPER

AccuStandardAccuTraceASTMeStandards

Accu-IonAccuNoHazAccuPAKAccuShots

NELAPNISTPetroCheckPetroTest

Page 84: 3 Year Shelf Life on Single Element ICP, ICP/MS & AAs Method 200.7, SW-846 33-35 ... ICP Multi-Element Standards 20-40 EPA Method 200.7, Revision 4.4 35-36 Calibration Standards 35

PRESORTEDBOUND PRINTED MATTER

U.S. POSTAGEPAID

BRIDGEPORT, CTPERMIT NO. 418


Recommended